Merge tag 'arc-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

Pull ARC updates from Vineet Gupta:
 "We have a relatively big changeset for ARC for 4.7.

  The highlight is support for EZChip (now Mellanox) NPS-400 network
  processor, a 400-Gb throughput C-programmable packet processor based
  on ARC700 cores from Synopsys. See

        http://www.mellanox.com/related-docs/prod_npu/PB_NPS-400.pdf

  Also present are irqchip and clocksource drivers for NPS as agreed
  with respective maintainers to go via ARC tree due to an soc header
  dependency.  I have the needed ACKs from Jason, Marc, Daniel.  You
  might run into a trivial merge conflict in drivers/irqchip/*

  This EZChip platform support required some deep changes in ARC
  architecture code and also opportunity to cleanup past sins (legacy
  irq domains, missing irq domain lookup, hard coded timer irqs...)

  Summary:

   - Support for EZChip (now Mellanox) NPS-400 Network processor based
     on ARC700

   - NPS interrupt controller and clocksource drivers

   - ARC timers probed off DT

   - ARC iqrchips switching to linear domain (upgrade from legacy
     domains)"

* tag 'arc-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (37 commits)
  arc: axs103_smp: Fix CPU frequency to 100MHz for dual-core
  arc: axs10x: Add DT bindings for I2S PLL Clock
  ARC: pae: STRICT_MM_TYPECHECKS was broken
  ARC: Add eznps platform to Kconfig and Makefile
  ARC: [plat-eznps] Use dedicated COMMAND_LINE_SIZE
  ARC: [plat-eznps] Use dedicated cpu_relax()
  ARC: [plat-eznps] Use dedicated identity auxiliary register.
  ARC: [plat-eznps] Use dedicated SMP barriers
  ARC: [plat-eznps] Use dedicated atomic/bitops/cmpxchg
  ARC: [plat-eznps] Use dedicated user stack top
  ARC: [plat-eznps] Add eznps platform
  ARC: [plat-eznps] Add eznps board defconfig and dts
  ARC: Mark secondary cpu online only after all HW setup is done
  ARC: rwlock: disable interrupts in !LLSC variant
  ARC: Make vmalloc size configurable
  ARC: clean out UAPI byteorder.h clean off Kconfig symbol
  irqchip: add nps Internal and external irqchips
  clocksource: Add NPS400 timers driver
  soc: Support for EZchip SoC
  Documentation: Add EZchip vendor to binding list
  ...

11 files changed, 230 insertions, 190 deletions

diff --git a/arch/arc/kernel/Makefile b/arch/arc/kernel/Makefile
index 1bc2036b19d7..cfcdedf52ff8 100644
--- a/arch/arc/kernel/Makefile
+++ b/arch/arc/kernel/Makefile
@@ -9,7 +9,7 @@
 CFLAGS_ptrace.o		+= -DUTS_MACHINE='"$(UTS_MACHINE)"'
 
 obj-y	:= arcksyms.o setup.o irq.o time.o reset.o ptrace.o process.o devtree.o
-obj-y	+= signal.o traps.o sys.o troubleshoot.o stacktrace.o disasm.o clk.o
+obj-y	+= signal.o traps.o sys.o troubleshoot.o stacktrace.o disasm.o
 obj-$(CONFIG_ISA_ARCOMPACT)		+= entry-compact.o intc-compact.o
 obj-$(CONFIG_ISA_ARCV2)			+= entry-arcv2.o intc-arcv2.o
 obj-$(CONFIG_PCI)  			+= pcibios.o
diff --git a/arch/arc/kernel/clk.c b/arch/arc/kernel/clk.c
deleted file mode 100644
index 10c7b0b5a079..000000000000
--- a/arch/arc/kernel/clk.c
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <asm/clk.h>
-
-unsigned long core_freq = 80000000;
-
-/*
- * As of now we default to device-tree provided clock
- * In future we can determine this in early boot
- */
-int arc_set_core_freq(unsigned long freq)
-{
-	core_freq = freq;
-	return 0;
-}
diff --git a/arch/arc/kernel/ctx_sw.c b/arch/arc/kernel/ctx_sw.c
index 5d446df2c413..6f4cb0dab1b9 100644
--- a/arch/arc/kernel/ctx_sw.c
+++ b/arch/arc/kernel/ctx_sw.c
@@ -16,6 +16,9 @@
 
 #include <asm/asm-offsets.h>
 #include <linux/sched.h>
+#ifdef CONFIG_ARC_PLAT_EZNPS
+#include <plat/ctop.h>
+#endif
 
 #define KSP_WORD_OFF 	((TASK_THREAD + THREAD_KSP) / 4)
 
@@ -67,9 +70,16 @@ __switch_to(struct task_struct *prev_task, struct task_struct *next_task)
 #ifndef CONFIG_SMP
 		"st  %2, [@_current_task]	\n\t"
 #else
+#ifdef CONFIG_ARC_PLAT_EZNPS
+		"lr   r24, [%4]		\n\t"
+#ifndef CONFIG_EZNPS_MTM_EXT
+		"lsr  r24, r24, 4		\n\t"
+#endif
+#else
 		"lr   r24, [identity]		\n\t"
 		"lsr  r24, r24, 8		\n\t"
 		"bmsk r24, r24, 7		\n\t"
+#endif
 		"add2 r24, @_current_task, r24	\n\t"
 		"st   %2,  [r24]		\n\t"
 #endif
@@ -107,6 +117,9 @@ __switch_to(struct task_struct *prev_task, struct task_struct *next_task)
 
 		: "=r"(tmp)
 		: "n"(KSP_WORD_OFF), "r"(next), "r"(prev)
+#ifdef CONFIG_ARC_PLAT_EZNPS
+		, "i"(CTOP_AUX_LOGIC_GLOBAL_ID)
+#endif
 		: "blink"
 	);
 
diff --git a/arch/arc/kernel/devtree.c b/arch/arc/kernel/devtree.c
index 7e844fd8213f..f1e07c2344f8 100644
--- a/arch/arc/kernel/devtree.c
+++ b/arch/arc/kernel/devtree.c
@@ -14,7 +14,6 @@
 #include <linux/memblock.h>
 #include <linux/of.h>
 #include <linux/of_fdt.h>
-#include <asm/clk.h>
 #include <asm/mach_desc.h>
 
 #ifdef CONFIG_SERIAL_EARLYCON
@@ -28,14 +27,12 @@ unsigned int __init arc_early_base_baud(void)
 
 static void __init arc_set_early_base_baud(unsigned long dt_root)
 {
-	unsigned int core_clk = arc_get_core_freq();
-
 	if (of_flat_dt_is_compatible(dt_root, "abilis,arc-tb10x"))
-		arc_base_baud = core_clk/3;
+		arc_base_baud = 166666666;	/* Fixed 166.6MHz clk (TB10x) */
 	else if (of_flat_dt_is_compatible(dt_root, "snps,arc-sdp"))
 		arc_base_baud = 33333333;	/* Fixed 33MHz clk (AXS10x) */
 	else
-		arc_base_baud = core_clk;
+		arc_base_baud = 50000000;	/* Fixed default 50MHz */
 }
 #else
 #define arc_set_early_base_baud(dt_root)
@@ -65,8 +62,6 @@ const struct machine_desc * __init setup_machine_fdt(void *dt)
 {
 	const struct machine_desc *mdesc;
 	unsigned long dt_root;
-	const void *clk;
-	int len;
 
 	if (!early_init_dt_scan(dt))
 		return NULL;
@@ -76,10 +71,6 @@ const struct machine_desc * __init setup_machine_fdt(void *dt)
 		machine_halt();
 
 	dt_root = of_get_flat_dt_root();
-	clk = of_get_flat_dt_prop(dt_root, "clock-frequency", &len);
-	if (clk)
-		arc_set_core_freq(of_read_ulong(clk, len/4));
-
 	arc_set_early_base_baud(dt_root);
 
 	return mdesc;
diff --git a/arch/arc/kernel/intc-arcv2.c b/arch/arc/kernel/intc-arcv2.c
index 942526322ae7..6c24faf48b16 100644
--- a/arch/arc/kernel/intc-arcv2.c
+++ b/arch/arc/kernel/intc-arcv2.c
@@ -137,23 +137,30 @@ static const struct irq_domain_ops arcv2_irq_ops = {
 	.map = arcv2_irq_map,
 };
 
-static struct irq_domain *root_domain;
 
 static int __init
 init_onchip_IRQ(struct device_node *intc, struct device_node *parent)
 {
+	struct irq_domain *root_domain;
+
 	if (parent)
 		panic("DeviceTree incore intc not a root irq controller\n");
 
-	root_domain = irq_domain_add_legacy(intc, NR_CPU_IRQS, 0, 0,
-					    &arcv2_irq_ops, NULL);
-
+	root_domain = irq_domain_add_linear(intc, NR_CPU_IRQS, &arcv2_irq_ops, NULL);
 	if (!root_domain)
 		panic("root irq domain not avail\n");
 
-	/* with this we don't need to export root_domain */
+	/*
+	 * Needed for primary domain lookup to succeed
+	 * This is a primary irqchip, and can never have a parent
+	 */
 	irq_set_default_host(root_domain);
 
+#ifdef CONFIG_SMP
+	irq_create_mapping(root_domain, IPI_IRQ);
+#endif
+	irq_create_mapping(root_domain, SOFTIRQ_IRQ);
+
 	return 0;
 }
 
diff --git a/arch/arc/kernel/intc-compact.c b/arch/arc/kernel/intc-compact.c
index 224d1c3aa9c4..c5cceca36118 100644
--- a/arch/arc/kernel/intc-compact.c
+++ b/arch/arc/kernel/intc-compact.c
@@ -14,6 +14,8 @@
 #include <linux/irqchip.h>
 #include <asm/irq.h>
 
+#define TIMER0_IRQ	3	/* Fixed by ISA */
+
 /*
  * Early Hardware specific Interrupt setup
  * -Platform independent, needed for each CPU (not foldable into init_IRQ)
@@ -79,8 +81,9 @@ static struct irq_chip onchip_intc = {
 static int arc_intc_domain_map(struct irq_domain *d, unsigned int irq,
 			       irq_hw_number_t hw)
 {
-	switch (irq) {
+	switch (hw) {
 	case TIMER0_IRQ:
+		irq_set_percpu_devid(irq);
 		irq_set_chip_and_handler(irq, &onchip_intc, handle_percpu_irq);
 		break;
 	default:
@@ -94,21 +97,23 @@ static const struct irq_domain_ops arc_intc_domain_ops = {
 	.map = arc_intc_domain_map,
 };
 
-static struct irq_domain *root_domain;
-
 static int __init
 init_onchip_IRQ(struct device_node *intc, struct device_node *parent)
 {
+	struct irq_domain *root_domain;
+
 	if (parent)
 		panic("DeviceTree incore intc not a root irq controller\n");
 
-	root_domain = irq_domain_add_legacy(intc, NR_CPU_IRQS, 0, 0,
+	root_domain = irq_domain_add_linear(intc, NR_CPU_IRQS,
 					    &arc_intc_domain_ops, NULL);
-
 	if (!root_domain)
 		panic("root irq domain not avail\n");
 
-	/* with this we don't need to export root_domain */
+	/*
+	 * Needed for primary domain lookup to succeed
+	 * This is a primary irqchip, and can never have a parent
+	 */
 	irq_set_default_host(root_domain);
 
 	return 0;
diff --git a/arch/arc/kernel/irq.c b/arch/arc/kernel/irq.c
index ba17f85285cf..538b36afe89e 100644
--- a/arch/arc/kernel/irq.c
+++ b/arch/arc/kernel/irq.c
@@ -41,53 +41,7 @@ void __init init_IRQ(void)
  * "C" Entry point for any ARC ISR, called from low level vector handler
  * @irq is the vector number read from ICAUSE reg of on-chip intc
  */
-void arch_do_IRQ(unsigned int irq, struct pt_regs *regs)
+void arch_do_IRQ(unsigned int hwirq, struct pt_regs *regs)
 {
-	struct pt_regs *old_regs = set_irq_regs(regs);
-
-	irq_enter();
-	generic_handle_irq(irq);
-	irq_exit();
-	set_irq_regs(old_regs);
-}
-
-/*
- * API called for requesting percpu interrupts - called by each CPU
- *  - For boot CPU, actually request the IRQ with genirq core + enables
- *  - For subsequent callers only enable called locally
- *
- * Relies on being called by boot cpu first (i.e. request called ahead) of
- * any enable as expected by genirq. Hence Suitable only for TIMER, IPI
- * which are guaranteed to be setup on boot core first.
- * Late probed peripherals such as perf can't use this as there no guarantee
- * of being called on boot CPU first.
- */
-
-void arc_request_percpu_irq(int irq, int cpu,
-                            irqreturn_t (*isr)(int irq, void *dev),
-                            const char *irq_nm,
-                            void *percpu_dev)
-{
-	/* Boot cpu calls request, all call enable */
-	if (!cpu) {
-		int rc;
-
-#ifdef CONFIG_ISA_ARCOMPACT
-		/*
-		 * A subsequent request_percpu_irq() fails if percpu_devid is
-		 * not set. That in turns sets NOAUTOEN, meaning each core needs
-		 * to call enable_percpu_irq()
-		 *
-		 * For ARCv2, this is done in irq map function since we know
-		 * which irqs are strictly per cpu
-		 */
-		irq_set_percpu_devid(irq);
-#endif
-
-		rc = request_percpu_irq(irq, isr, irq_nm, percpu_dev);
-		if (rc)
-			panic("Percpu IRQ request failed for %d\n", irq);
-	}
-
-	enable_percpu_irq(irq, 0);
+	handle_domain_irq(NULL, hwirq, regs);
 }
diff --git a/arch/arc/kernel/mcip.c b/arch/arc/kernel/mcip.c
index c41c364b926c..72f9179b1a24 100644
--- a/arch/arc/kernel/mcip.c
+++ b/arch/arc/kernel/mcip.c
@@ -15,9 +15,6 @@
 #include <asm/mcip.h>
 #include <asm/setup.h>
 
-#define IPI_IRQ		19
-#define SOFTIRQ_IRQ	21
-
 static char smp_cpuinfo_buf[128];
 static int idu_detected;
 
@@ -116,15 +113,13 @@ static void mcip_probe_n_setup(void)
 		IS_AVAIL1(mp.dbg, "DEBUG "),
 		IS_AVAIL1(mp.gfrc, "GFRC"));
 
+	cpuinfo_arc700[0].extn.gfrc = mp.gfrc;
 	idu_detected = mp.idu;
 
 	if (mp.dbg) {
 		__mcip_cmd_data(CMD_DEBUG_SET_SELECT, 0, 0xf);
 		__mcip_cmd_data(CMD_DEBUG_SET_MASK, 0xf, 0xf);
 	}
-
-	if (IS_ENABLED(CONFIG_ARC_HAS_GFRC) && !mp.gfrc)
-		panic("kernel trying to use non-existent GFRC\n");
 }
 
 struct plat_smp_ops plat_smp_ops = {
diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c
index 151acf0c9383..f63b8bfefb0c 100644
--- a/arch/arc/kernel/setup.c
+++ b/arch/arc/kernel/setup.c
@@ -13,7 +13,6 @@
 #include <linux/console.h>
 #include <linux/module.h>
 #include <linux/cpu.h>
-#include <linux/clk-provider.h>
 #include <linux/of_fdt.h>
 #include <linux/of_platform.h>
 #include <linux/cache.h>
@@ -24,7 +23,6 @@
 #include <asm/page.h>
 #include <asm/irq.h>
 #include <asm/unwind.h>
-#include <asm/clk.h>
 #include <asm/mach_desc.h>
 #include <asm/smp.h>
 
@@ -220,10 +218,6 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
 	if (tbl->info.id == 0)
 		n += scnprintf(buf + n, len - n, "UNKNOWN ARC Processor\n");
 
-	n += scnprintf(buf + n, len - n, "CPU speed\t: %u.%02u Mhz\n",
-		       (unsigned int)(arc_get_core_freq() / 1000000),
-		       (unsigned int)(arc_get_core_freq() / 10000) % 100);
-
 	n += scnprintf(buf + n, len - n, "Timers\t\t: %s%s%s%s\nISA Extn\t: ",
 		       IS_AVAIL1(cpu->extn.timer0, "Timer0 "),
 		       IS_AVAIL1(cpu->extn.timer1, "Timer1 "),
@@ -314,9 +308,6 @@ static void arc_chk_core_config(void)
 	if (!cpu->extn.timer1)
 		panic("Timer1 is not present!\n");
 
-	if (IS_ENABLED(CONFIG_ARC_HAS_RTC) && !cpu->extn.rtc)
-		panic("RTC is not present\n");
-
 #ifdef CONFIG_ARC_HAS_DCCM
 	/*
 	 * DCCM can be arbit placed in hardware.
@@ -444,7 +435,6 @@ void __init setup_arch(char **cmdline_p)
 
 static int __init customize_machine(void)
 {
-	of_clk_init(NULL);
 	/*
 	 * Traverses flattened DeviceTree - registering platform devices
 	 * (if any) complete with their resources
@@ -477,6 +467,8 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 {
 	char *str;
 	int cpu_id = ptr_to_cpu(v);
+	struct device_node *core_clk = of_find_node_by_name(NULL, "core_clk");
+	u32 freq = 0;
 
 	if (!cpu_online(cpu_id)) {
 		seq_printf(m, "processor [%d]\t: Offline\n", cpu_id);
@@ -489,6 +481,11 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 
 	seq_printf(m, arc_cpu_mumbojumbo(cpu_id, str, PAGE_SIZE));
 
+	of_property_read_u32(core_clk, "clock-frequency", &freq);
+	if (freq)
+		seq_printf(m, "CPU speed\t: %u.%02u Mhz\n",
+			   freq / 1000000, (freq / 10000) % 100);
+
 	seq_printf(m, "Bogo MIPS\t: %lu.%02lu\n",
 		   loops_per_jiffy / (500000 / HZ),
 		   (loops_per_jiffy / (5000 / HZ)) % 100);
diff --git a/arch/arc/kernel/smp.c b/arch/arc/kernel/smp.c
index 4cb3add77c75..f183cc648851 100644
--- a/arch/arc/kernel/smp.c
+++ b/arch/arc/kernel/smp.c
@@ -126,11 +126,6 @@ void start_kernel_secondary(void)
 	current->active_mm = mm;
 	cpumask_set_cpu(cpu, mm_cpumask(mm));
 
-	notify_cpu_starting(cpu);
-	set_cpu_online(cpu, true);
-
-	pr_info("## CPU%u LIVE ##: Executing Code...\n", cpu);
-
 	/* Some SMP H/w setup - for each cpu */
 	if (plat_smp_ops.init_per_cpu)
 		plat_smp_ops.init_per_cpu(cpu);
@@ -138,7 +133,10 @@ void start_kernel_secondary(void)
 	if (machine_desc->init_per_cpu)
 		machine_desc->init_per_cpu(cpu);
 
-	arc_local_timer_setup();
+	notify_cpu_starting(cpu);
+	set_cpu_online(cpu, true);
+
+	pr_info("## CPU%u LIVE ##: Executing Code...\n", cpu);
 
 	local_irq_enable();
 	preempt_disable();
@@ -346,6 +344,10 @@ irqreturn_t do_IPI(int irq, void *dev_id)
 
 /*
  * API called by platform code to hookup arch-common ISR to their IPI IRQ
+ *
+ * Note: If IPI is provided by platform (vs. say ARC MCIP), their intc setup/map
+ * function needs to call call irq_set_percpu_devid() for IPI IRQ, otherwise
+ * request_percpu_irq() below will fail
  */
 static DEFINE_PER_CPU(int, ipi_dev);
 
@@ -353,7 +355,16 @@ int smp_ipi_irq_setup(int cpu, int irq)
 {
 	int *dev = per_cpu_ptr(&ipi_dev, cpu);
 
-	arc_request_percpu_irq(irq, cpu, do_IPI, "IPI Interrupt", dev);
+	/* Boot cpu calls request, all call enable */
+	if (!cpu) {
+		int rc;
+
+		rc = request_percpu_irq(irq, do_IPI, "IPI Interrupt", dev);
+		if (rc)
+			panic("Percpu IRQ request failed for %d\n", irq);
+	}
+
+	enable_percpu_irq(irq, 0);
 
 	return 0;
 }
diff --git a/arch/arc/kernel/time.c b/arch/arc/kernel/time.c
index 7d9a736fc7e5..4549ab255dd1 100644
--- a/arch/arc/kernel/time.c
+++ b/arch/arc/kernel/time.c
@@ -29,21 +29,16 @@
  * which however is currently broken
  */
 
-#include <linux/spinlock.h>
 #include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/time.h>
-#include <linux/init.h>
-#include <linux/timex.h>
-#include <linux/profile.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
+#include <linux/cpu.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
 #include <asm/irq.h>
 #include <asm/arcregs.h>
-#include <asm/clk.h>
-#include <asm/mach_desc.h>
 
 #include <asm/mcip.h>
 
@@ -60,16 +55,35 @@
 
 #define ARC_TIMER_MAX	0xFFFFFFFF
 
-/********** Clock Source Device *********/
-
-#ifdef CONFIG_ARC_HAS_GFRC
+static unsigned long arc_timer_freq;
 
-static int arc_counter_setup(void)
+static int noinline arc_get_timer_clk(struct device_node *node)
 {
-	return 1;
+	struct clk *clk;
+	int ret;
+
+	clk = of_clk_get(node, 0);
+	if (IS_ERR(clk)) {
+		pr_err("timer missing clk");
+		return PTR_ERR(clk);
+	}
+
+	ret = clk_prepare_enable(clk);
+	if (ret) {
+		pr_err("Couldn't enable parent clk\n");
+		return ret;
+	}
+
+	arc_timer_freq = clk_get_rate(clk);
+
+	return 0;
 }
 
-static cycle_t arc_counter_read(struct clocksource *cs)
+/********** Clock Source Device *********/
+
+#ifdef CONFIG_ARC_HAS_GFRC
+
+static cycle_t arc_read_gfrc(struct clocksource *cs)
 {
 	unsigned long flags;
 	union {
@@ -94,15 +108,31 @@ static cycle_t arc_counter_read(struct clocksource *cs)
 	return stamp.full;
 }
 
-static struct clocksource arc_counter = {
+static struct clocksource arc_counter_gfrc = {
 	.name   = "ARConnect GFRC",
 	.rating = 400,
-	.read   = arc_counter_read,
+	.read   = arc_read_gfrc,
 	.mask   = CLOCKSOURCE_MASK(64),
 	.flags  = CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-#else
+static void __init arc_cs_setup_gfrc(struct device_node *node)
+{
+	int exists = cpuinfo_arc700[0].extn.gfrc;
+	int ret;
+
+	if (WARN(!exists, "Global-64-bit-Ctr clocksource not detected"))
+		return;
+
+	ret = arc_get_timer_clk(node);
+	if (ret)
+		return;
+
+	clocksource_register_hz(&arc_counter_gfrc, arc_timer_freq);
+}
+CLOCKSOURCE_OF_DECLARE(arc_gfrc, "snps,archs-timer-gfrc", arc_cs_setup_gfrc);
+
+#endif
 
 #ifdef CONFIG_ARC_HAS_RTC
 
@@ -110,15 +140,7 @@ static struct clocksource arc_counter = {
 #define AUX_RTC_LOW	0x104
 #define AUX_RTC_HIGH	0x105
 
-int arc_counter_setup(void)
-{
-	write_aux_reg(AUX_RTC_CTRL, 1);
-
-	/* Not usable in SMP */
-	return !IS_ENABLED(CONFIG_SMP);
-}
-
-static cycle_t arc_counter_read(struct clocksource *cs)
+static cycle_t arc_read_rtc(struct clocksource *cs)
 {
 	unsigned long status;
 	union {
@@ -142,47 +164,78 @@ static cycle_t arc_counter_read(struct clocksource *cs)
 	return stamp.full;
 }
 
-static struct clocksource arc_counter = {
+static struct clocksource arc_counter_rtc = {
 	.name   = "ARCv2 RTC",
 	.rating = 350,
-	.read   = arc_counter_read,
+	.read   = arc_read_rtc,
 	.mask   = CLOCKSOURCE_MASK(64),
 	.flags  = CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-#else /* !CONFIG_ARC_HAS_RTC */
-
-/*
- * set 32bit TIMER1 to keep counting monotonically and wraparound
- */
-int arc_counter_setup(void)
+static void __init arc_cs_setup_rtc(struct device_node *node)
 {
-	write_aux_reg(ARC_REG_TIMER1_LIMIT, ARC_TIMER_MAX);
-	write_aux_reg(ARC_REG_TIMER1_CNT, 0);
-	write_aux_reg(ARC_REG_TIMER1_CTRL, TIMER_CTRL_NH);
+	int exists = cpuinfo_arc700[smp_processor_id()].extn.rtc;
+	int ret;
+
+	if (WARN(!exists, "Local-64-bit-Ctr clocksource not detected"))
+		return;
+
+	/* Local to CPU hence not usable in SMP */
+	if (WARN(IS_ENABLED(CONFIG_SMP), "Local-64-bit-Ctr not usable in SMP"))
+		return;
+
+	ret = arc_get_timer_clk(node);
+	if (ret)
+		return;
+
+	write_aux_reg(AUX_RTC_CTRL, 1);
 
-	/* Not usable in SMP */
-	return !IS_ENABLED(CONFIG_SMP);
+	clocksource_register_hz(&arc_counter_rtc, arc_timer_freq);
 }
+CLOCKSOURCE_OF_DECLARE(arc_rtc, "snps,archs-timer-rtc", arc_cs_setup_rtc);
 
-static cycle_t arc_counter_read(struct clocksource *cs)
+#endif
+
+/*
+ * 32bit TIMER1 to keep counting monotonically and wraparound
+ */
+
+static cycle_t arc_read_timer1(struct clocksource *cs)
 {
 	return (cycle_t) read_aux_reg(ARC_REG_TIMER1_CNT);
 }
 
-static struct clocksource arc_counter = {
+static struct clocksource arc_counter_timer1 = {
 	.name   = "ARC Timer1",
 	.rating = 300,
-	.read   = arc_counter_read,
+	.read   = arc_read_timer1,
 	.mask   = CLOCKSOURCE_MASK(32),
 	.flags  = CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-#endif
-#endif
+static void __init arc_cs_setup_timer1(struct device_node *node)
+{
+	int ret;
+
+	/* Local to CPU hence not usable in SMP */
+	if (IS_ENABLED(CONFIG_SMP))
+		return;
+
+	ret = arc_get_timer_clk(node);
+	if (ret)
+		return;
+
+	write_aux_reg(ARC_REG_TIMER1_LIMIT, ARC_TIMER_MAX);
+	write_aux_reg(ARC_REG_TIMER1_CNT, 0);
+	write_aux_reg(ARC_REG_TIMER1_CTRL, TIMER_CTRL_NH);
+
+	clocksource_register_hz(&arc_counter_timer1, arc_timer_freq);
+}
 
 /********** Clock Event Device *********/
 
+static int arc_timer_irq;
+
 /*
  * Arm the timer to interrupt after @cycles
  * The distinction for oneshot/periodic is done in arc_event_timer_ack() below
@@ -209,7 +262,7 @@ static int arc_clkevent_set_periodic(struct clock_event_device *dev)
 	 * At X Hz, 1 sec = 1000ms -> X cycles;
 	 *		      10ms -> X / 100 cycles
 	 */
-	arc_timer_event_setup(arc_get_core_freq() / HZ);
+	arc_timer_event_setup(arc_timer_freq / HZ);
 	return 0;
 }
 
@@ -218,7 +271,6 @@ static DEFINE_PER_CPU(struct clock_event_device, arc_clockevent_device) = {
 	.features		= CLOCK_EVT_FEAT_ONESHOT |
 				  CLOCK_EVT_FEAT_PERIODIC,
 	.rating			= 300,
-	.irq			= TIMER0_IRQ,	/* hardwired, no need for resources */
 	.set_next_event		= arc_clkevent_set_next_event,
 	.set_state_periodic	= arc_clkevent_set_periodic,
 };
@@ -244,45 +296,81 @@ static irqreturn_t timer_irq_handler(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static int arc_timer_cpu_notify(struct notifier_block *self,
+				unsigned long action, void *hcpu)
+{
+	struct clock_event_device *evt = this_cpu_ptr(&arc_clockevent_device);
+
+	evt->cpumask = cpumask_of(smp_processor_id());
+
+	switch (action & ~CPU_TASKS_FROZEN) {
+	case CPU_STARTING:
+		clockevents_config_and_register(evt, arc_timer_freq,
+						0, ULONG_MAX);
+		enable_percpu_irq(arc_timer_irq, 0);
+		break;
+	case CPU_DYING:
+		disable_percpu_irq(arc_timer_irq);
+		break;
+	}
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block arc_timer_cpu_nb = {
+	.notifier_call = arc_timer_cpu_notify,
+};
+
 /*
- * Setup the local event timer for @cpu
+ * clockevent setup for boot CPU
  */
-void arc_local_timer_setup()
+static void __init arc_clockevent_setup(struct device_node *node)
 {
 	struct clock_event_device *evt = this_cpu_ptr(&arc_clockevent_device);
-	int cpu = smp_processor_id();
+	int ret;
+
+	register_cpu_notifier(&arc_timer_cpu_nb);
 
-	evt->cpumask = cpumask_of(cpu);
-	clockevents_config_and_register(evt, arc_get_core_freq(),
+	arc_timer_irq = irq_of_parse_and_map(node, 0);
+	if (arc_timer_irq <= 0)
+		panic("clockevent: missing irq");
+
+	ret = arc_get_timer_clk(node);
+	if (ret)
+		panic("clockevent: missing clk");
+
+	evt->irq = arc_timer_irq;
+	evt->cpumask = cpumask_of(smp_processor_id());
+	clockevents_config_and_register(evt, arc_timer_freq,
 					0, ARC_TIMER_MAX);
 
-	/* setup the per-cpu timer IRQ handler - for all cpus */
-	arc_request_percpu_irq(TIMER0_IRQ, cpu, timer_irq_handler,
-			       "Timer0 (per-cpu-tick)", evt);
+	/* Needs apriori irq_set_percpu_devid() done in intc map function */
+	ret = request_percpu_irq(arc_timer_irq, timer_irq_handler,
+				 "Timer0 (per-cpu-tick)", evt);
+	if (ret)
+		panic("clockevent: unable to request irq\n");
+
+	enable_percpu_irq(arc_timer_irq, 0);
 }
 
+static void __init arc_of_timer_init(struct device_node *np)
+{
+	static int init_count = 0;
+
+	if (!init_count) {
+		init_count = 1;
+		arc_clockevent_setup(np);
+	} else {
+		arc_cs_setup_timer1(np);
+	}
+}
+CLOCKSOURCE_OF_DECLARE(arc_clkevt, "snps,arc-timer", arc_of_timer_init);
+
 /*
  * Called from start_kernel() - boot CPU only
- *
- * -Sets up h/w timers as applicable on boot cpu
- * -Also sets up any global state needed for timer subsystem:
- *    - for "counting" timer, registers a clocksource, usable across CPUs
- *      (provided that underlying counter h/w is synchronized across cores)
- *    - for "event" timer, sets up TIMER0 IRQ (as that is platform agnostic)
  */
 void __init time_init(void)
 {
-	/*
-	 * sets up the timekeeping free-flowing counter which also returns
-	 * whether the counter is usable as clocksource
-	 */
-	if (arc_counter_setup())
-		/*
-		 * CLK upto 4.29 GHz can be safely represented in 32 bits
-		 * because Max 32 bit number is 4,294,967,295
-		 */
-		clocksource_register_hz(&arc_counter, arc_get_core_freq());
-
-	/* sets up the periodic event timer */
-	arc_local_timer_setup();
+	of_clk_init(NULL);
+	clocksource_probe();
 }