[CPUFREQ/S3C64xx] Move S3C64xx CPUfreq driver into drivers/cpufreq

This is a straight code motion patch, there are no changes to the driver
itself. The Kconfig is left untouched as the ARM CPUfreq Kconfig is all
in one big block in arm/Kconfig and should be moved en masse rather than
being done piecemeal.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dave Jones <davej@redhat.com>

2 files changed, 0 insertions, 274 deletions

diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index 4657363f0674..f5a7144a052f 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -23,10 +23,6 @@ obj-$(CONFIG_CPU_S3C6410)	+= s3c6410.o
 obj-y				+= irq.o
 obj-y				+= irq-eint.o
 
-# CPU frequency scaling
-
-obj-$(CONFIG_CPU_FREQ_S3C64XX)  += cpufreq.o
-
 # DMA support
 
 obj-$(CONFIG_S3C64XX_DMA)	+= dma.o
diff --git a/arch/arm/mach-s3c64xx/cpufreq.c b/arch/arm/mach-s3c64xx/cpufreq.c
deleted file mode 100644
index 4375b97588b8..000000000000
--- a/arch/arm/mach-s3c64xx/cpufreq.c
+++ /dev/null
@@ -1,270 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/cpufreq.c
- *
- * Copyright 2009 Wolfson Microelectronics plc
- *
- * S3C64xx CPUfreq Support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/regulator/consumer.h>
-
-static struct clk *armclk;
-static struct regulator *vddarm;
-static unsigned long regulator_latency;
-
-#ifdef CONFIG_CPU_S3C6410
-struct s3c64xx_dvfs {
-	unsigned int vddarm_min;
-	unsigned int vddarm_max;
-};
-
-static struct s3c64xx_dvfs s3c64xx_dvfs_table[] = {
-	[0] = { 1000000, 1150000 },
-	[1] = { 1050000, 1150000 },
-	[2] = { 1100000, 1150000 },
-	[3] = { 1200000, 1350000 },
-};
-
-static struct cpufreq_frequency_table s3c64xx_freq_table[] = {
-	{ 0,  66000 },
-	{ 0, 133000 },
-	{ 1, 222000 },
-	{ 1, 266000 },
-	{ 2, 333000 },
-	{ 2, 400000 },
-	{ 2, 532000 },
-	{ 2, 533000 },
-	{ 3, 667000 },
-	{ 0, CPUFREQ_TABLE_END },
-};
-#endif
-
-static int s3c64xx_cpufreq_verify_speed(struct cpufreq_policy *policy)
-{
-	if (policy->cpu != 0)
-		return -EINVAL;
-
-	return cpufreq_frequency_table_verify(policy, s3c64xx_freq_table);
-}
-
-static unsigned int s3c64xx_cpufreq_get_speed(unsigned int cpu)
-{
-	if (cpu != 0)
-		return 0;
-
-	return clk_get_rate(armclk) / 1000;
-}
-
-static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy,
-				      unsigned int target_freq,
-				      unsigned int relation)
-{
-	int ret;
-	unsigned int i;
-	struct cpufreq_freqs freqs;
-	struct s3c64xx_dvfs *dvfs;
-
-	ret = cpufreq_frequency_table_target(policy, s3c64xx_freq_table,
-					     target_freq, relation, &i);
-	if (ret != 0)
-		return ret;
-
-	freqs.cpu = 0;
-	freqs.old = clk_get_rate(armclk) / 1000;
-	freqs.new = s3c64xx_freq_table[i].frequency;
-	freqs.flags = 0;
-	dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[i].index];
-
-	if (freqs.old == freqs.new)
-		return 0;
-
-	pr_debug("cpufreq: Transition %d-%dkHz\n", freqs.old, freqs.new);
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-#ifdef CONFIG_REGULATOR
-	if (vddarm && freqs.new > freqs.old) {
-		ret = regulator_set_voltage(vddarm,
-					    dvfs->vddarm_min,
-					    dvfs->vddarm_max);
-		if (ret != 0) {
-			pr_err("cpufreq: Failed to set VDDARM for %dkHz: %d\n",
-			       freqs.new, ret);
-			goto err;
-		}
-	}
-#endif
-
-	ret = clk_set_rate(armclk, freqs.new * 1000);
-	if (ret < 0) {
-		pr_err("cpufreq: Failed to set rate %dkHz: %d\n",
-		       freqs.new, ret);
-		goto err;
-	}
-
-#ifdef CONFIG_REGULATOR
-	if (vddarm && freqs.new < freqs.old) {
-		ret = regulator_set_voltage(vddarm,
-					    dvfs->vddarm_min,
-					    dvfs->vddarm_max);
-		if (ret != 0) {
-			pr_err("cpufreq: Failed to set VDDARM for %dkHz: %d\n",
-			       freqs.new, ret);
-			goto err_clk;
-		}
-	}
-#endif
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	pr_debug("cpufreq: Set actual frequency %lukHz\n",
-		 clk_get_rate(armclk) / 1000);
-
-	return 0;
-
-err_clk:
-	if (clk_set_rate(armclk, freqs.old * 1000) < 0)
-		pr_err("Failed to restore original clock rate\n");
-err:
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	return ret;
-}
-
-#ifdef CONFIG_REGULATOR
-static void __init s3c64xx_cpufreq_config_regulator(void)
-{
-	int count, v, i, found;
-	struct cpufreq_frequency_table *freq;
-	struct s3c64xx_dvfs *dvfs;
-
-	count = regulator_count_voltages(vddarm);
-	if (count < 0) {
-		pr_err("cpufreq: Unable to check supported voltages\n");
-	}
-
-	freq = s3c64xx_freq_table;
-	while (count > 0 && freq->frequency != CPUFREQ_TABLE_END) {
-		if (freq->frequency == CPUFREQ_ENTRY_INVALID)
-			continue;
-
-		dvfs = &s3c64xx_dvfs_table[freq->index];
-		found = 0;
-
-		for (i = 0; i < count; i++) {
-			v = regulator_list_voltage(vddarm, i);
-			if (v >= dvfs->vddarm_min && v <= dvfs->vddarm_max)
-				found = 1;
-		}
-
-		if (!found) {
-			pr_debug("cpufreq: %dkHz unsupported by regulator\n",
-				 freq->frequency);
-			freq->frequency = CPUFREQ_ENTRY_INVALID;
-		}
-
-		freq++;
-	}
-
-	/* Guess based on having to do an I2C/SPI write; in future we
-	 * will be able to query the regulator performance here. */
-	regulator_latency = 1 * 1000 * 1000;
-}
-#endif
-
-static int s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
-{
-	int ret;
-	struct cpufreq_frequency_table *freq;
-
-	if (policy->cpu != 0)
-		return -EINVAL;
-
-	if (s3c64xx_freq_table == NULL) {
-		pr_err("cpufreq: No frequency information for this CPU\n");
-		return -ENODEV;
-	}
-
-	armclk = clk_get(NULL, "armclk");
-	if (IS_ERR(armclk)) {
-		pr_err("cpufreq: Unable to obtain ARMCLK: %ld\n",
-		       PTR_ERR(armclk));
-		return PTR_ERR(armclk);
-	}
-
-#ifdef CONFIG_REGULATOR
-	vddarm = regulator_get(NULL, "vddarm");
-	if (IS_ERR(vddarm)) {
-		ret = PTR_ERR(vddarm);
-		pr_err("cpufreq: Failed to obtain VDDARM: %d\n", ret);
-		pr_err("cpufreq: Only frequency scaling available\n");
-		vddarm = NULL;
-	} else {
-		s3c64xx_cpufreq_config_regulator();
-	}
-#endif
-
-	freq = s3c64xx_freq_table;
-	while (freq->frequency != CPUFREQ_TABLE_END) {
-		unsigned long r;
-
-		/* Check for frequencies we can generate */
-		r = clk_round_rate(armclk, freq->frequency * 1000);
-		r /= 1000;
-		if (r != freq->frequency) {
-			pr_debug("cpufreq: %dkHz unsupported by clock\n",
-				 freq->frequency);
-			freq->frequency = CPUFREQ_ENTRY_INVALID;
-		}
-
-		/* If we have no regulator then assume startup
-		 * frequency is the maximum we can support. */
-		if (!vddarm && freq->frequency > s3c64xx_cpufreq_get_speed(0))
-			freq->frequency = CPUFREQ_ENTRY_INVALID;
-
-		freq++;
-	}
-
-	policy->cur = clk_get_rate(armclk) / 1000;
-
-	/* Datasheet says PLL stabalisation time (if we were to use
-	 * the PLLs, which we don't currently) is ~300us worst case,
-	 * but add some fudge.
-	 */
-	policy->cpuinfo.transition_latency = (500 * 1000) + regulator_latency;
-
-	ret = cpufreq_frequency_table_cpuinfo(policy, s3c64xx_freq_table);
-	if (ret != 0) {
-		pr_err("cpufreq: Failed to configure frequency table: %d\n",
-		       ret);
-		regulator_put(vddarm);
-		clk_put(armclk);
-	}
-
-	return ret;
-}
-
-static struct cpufreq_driver s3c64xx_cpufreq_driver = {
-	.owner		= THIS_MODULE,
-	.flags          = 0,
-	.verify		= s3c64xx_cpufreq_verify_speed,
-	.target		= s3c64xx_cpufreq_set_target,
-	.get		= s3c64xx_cpufreq_get_speed,
-	.init		= s3c64xx_cpufreq_driver_init,
-	.name		= "s3c",
-};
-
-static int __init s3c64xx_cpufreq_init(void)
-{
-	return cpufreq_register_driver(&s3c64xx_cpufreq_driver);
-}
-module_init(s3c64xx_cpufreq_init);