powerpc/pci: Always print PHB and PE numbers as hexadecimal

PHB, PE (and by association MVE) numbers are printed as a mix of decimal
and hexadecimal throughout the kernel.  This can be misleading, so make
them all hexadecimal.

Standardising on hex instead of dec because:

 - PHB numbers are presented in hex in sysfs/debugfs (and lspci, etc)
 - PE numbers are presented as hex in sysfs and parsed in hex in debugfs

The only place I think this could cause confusing are the messages during
boot, i.e.

	pci 000a:01     : [PE# 000] Secondary bus 1 associated with PE#0

which can be a quick way to check PE numbers.  pe_level_printk() will
only print two characters instead of three, so the above would be

	pci 000a:01     : [PE# 00] Secondary bus 1 associated with PE#0

which gives a hint it's in hex.

Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

4 files changed, 25 insertions, 25 deletions

diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index 2354ea51e871..6fb5522acd70 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -393,7 +393,7 @@ static void *pnv_eeh_probe(struct pci_dn *pdn, void *data)
 	/* Create PE */
 	ret = eeh_add_to_parent_pe(edev);
 	if (ret) {
-		pr_warn("%s: Can't add PCI dev %04x:%02x:%02x.%01x to parent PE (%d)\n",
+		pr_warn("%s: Can't add PCI dev %04x:%02x:%02x.%01x to parent PE (%x)\n",
 			__func__, hose->global_number, pdn->busno,
 			PCI_SLOT(pdn->devfn), PCI_FUNC(pdn->devfn), ret);
 		return NULL;
@@ -1097,7 +1097,7 @@ static int pnv_eeh_reset(struct eeh_pe *pe, int option)
 
 	bus = eeh_pe_bus_get(pe);
 	if (!bus) {
-		pr_err("%s: Cannot find PCI bus for PHB#%d-PE#%x\n",
+		pr_err("%s: Cannot find PCI bus for PHB#%x-PE#%x\n",
 			__func__, pe->phb->global_number, pe->addr);
 		return -EIO;
 	}
diff --git a/arch/powerpc/platforms/powernv/npu-dma.c b/arch/powerpc/platforms/powernv/npu-dma.c
index aec85e778028..73b155fd4481 100644
--- a/arch/powerpc/platforms/powernv/npu-dma.c
+++ b/arch/powerpc/platforms/powernv/npu-dma.c
@@ -263,7 +263,7 @@ static int pnv_npu_dma_set_bypass(struct pnv_ioda_pe *npe)
 	/* Enable the bypass window */
 
 	top = roundup_pow_of_two(top);
-	dev_info(&npe->pdev->dev, "Enabling bypass for PE %d\n",
+	dev_info(&npe->pdev->dev, "Enabling bypass for PE %x\n",
 			npe->pe_number);
 	rc = opal_pci_map_pe_dma_window_real(phb->opal_id,
 			npe->pe_number, npe->pe_number,
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index dcdfee0cd4f2..b07680cd2518 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -83,7 +83,7 @@ void pe_level_printk(const struct pnv_ioda_pe *pe, const char *level,
 			PCI_SLOT(pe->rid), PCI_FUNC(pe->rid));
 #endif /* CONFIG_PCI_IOV*/
 
-	printk("%spci %s: [PE# %.3d] %pV",
+	printk("%spci %s: [PE# %.2x] %pV",
 	       level, pfix, pe->pe_number, &vaf);
 
 	va_end(args);
@@ -146,7 +146,7 @@ static struct pnv_ioda_pe *pnv_ioda_init_pe(struct pnv_phb *phb, int pe_no)
 	rc = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no,
 				       OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
 	if (rc != OPAL_SUCCESS && rc != OPAL_UNSUPPORTED)
-		pr_warn("%s: Error %lld unfreezing PHB#%d-PE#%d\n",
+		pr_warn("%s: Error %lld unfreezing PHB#%x-PE#%x\n",
 			__func__, rc, phb->hose->global_number, pe_no);
 
 	return &phb->ioda.pe_array[pe_no];
@@ -155,13 +155,13 @@ static struct pnv_ioda_pe *pnv_ioda_init_pe(struct pnv_phb *phb, int pe_no)
 static void pnv_ioda_reserve_pe(struct pnv_phb *phb, int pe_no)
 {
 	if (!(pe_no >= 0 && pe_no < phb->ioda.total_pe_num)) {
-		pr_warn("%s: Invalid PE %d on PHB#%x\n",
+		pr_warn("%s: Invalid PE %x on PHB#%x\n",
 			__func__, pe_no, phb->hose->global_number);
 		return;
 	}
 
 	if (test_and_set_bit(pe_no, phb->ioda.pe_alloc))
-		pr_debug("%s: PE %d was reserved on PHB#%x\n",
+		pr_debug("%s: PE %x was reserved on PHB#%x\n",
 			 __func__, pe_no, phb->hose->global_number);
 
 	pnv_ioda_init_pe(phb, pe_no);
@@ -229,7 +229,7 @@ static int pnv_ioda2_init_m64(struct pnv_phb *phb)
 	else if (phb->ioda.reserved_pe_idx == (phb->ioda.total_pe_num - 1))
 		r->end -= (2 * phb->ioda.m64_segsize);
 	else
-		pr_warn("  Cannot strip M64 segment for reserved PE#%d\n",
+		pr_warn("  Cannot strip M64 segment for reserved PE#%x\n",
 			phb->ioda.reserved_pe_idx);
 
 	return 0;
@@ -291,7 +291,7 @@ static int pnv_ioda1_init_m64(struct pnv_phb *phb)
 				OPAL_M64_WINDOW_TYPE, index, base, 0,
 				PNV_IODA1_M64_SEGS * segsz);
 		if (rc != OPAL_SUCCESS) {
-			pr_warn("  Error %lld setting M64 PHB#%d-BAR#%d\n",
+			pr_warn("  Error %lld setting M64 PHB#%x-BAR#%d\n",
 				rc, phb->hose->global_number, index);
 			goto fail;
 		}
@@ -300,7 +300,7 @@ static int pnv_ioda1_init_m64(struct pnv_phb *phb)
 				OPAL_M64_WINDOW_TYPE, index,
 				OPAL_ENABLE_M64_SPLIT);
 		if (rc != OPAL_SUCCESS) {
-			pr_warn("  Error %lld enabling M64 PHB#%d-BAR#%d\n",
+			pr_warn("  Error %lld enabling M64 PHB#%x-BAR#%d\n",
 				rc, phb->hose->global_number, index);
 			goto fail;
 		}
@@ -316,7 +316,7 @@ static int pnv_ioda1_init_m64(struct pnv_phb *phb)
 	else if (phb->ioda.reserved_pe_idx == (phb->ioda.total_pe_num - 1))
 		r->end -= (2 * phb->ioda.m64_segsize);
 	else
-		WARN(1, "Wrong reserved PE#%d on PHB#%d\n",
+		WARN(1, "Wrong reserved PE#%x on PHB#%x\n",
 		     phb->ioda.reserved_pe_idx, phb->hose->global_number);
 
 	return 0;
@@ -414,7 +414,7 @@ static struct pnv_ioda_pe *pnv_ioda_pick_m64_pe(struct pci_bus *bus, bool all)
 					pe->pe_number / PNV_IODA1_M64_SEGS,
 					pe->pe_number % PNV_IODA1_M64_SEGS);
 			if (rc != OPAL_SUCCESS)
-				pr_warn("%s: Error %lld mapping M64 for PHB#%d-PE#%d\n",
+				pr_warn("%s: Error %lld mapping M64 for PHB#%x-PE#%x\n",
 					__func__, rc, phb->hose->global_number,
 					pe->pe_number);
 		}
@@ -941,14 +941,14 @@ static int pnv_ioda_configure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe)
 	pe->mve_number = pe->pe_number;
 	rc = opal_pci_set_mve(phb->opal_id, pe->mve_number, pe->pe_number);
 	if (rc != OPAL_SUCCESS) {
-		pe_err(pe, "OPAL error %ld setting up MVE %d\n",
+		pe_err(pe, "OPAL error %ld setting up MVE %x\n",
 		       rc, pe->mve_number);
 		pe->mve_number = -1;
 	} else {
 		rc = opal_pci_set_mve_enable(phb->opal_id,
 					     pe->mve_number, OPAL_ENABLE_MVE);
 		if (rc) {
-			pe_err(pe, "OPAL error %ld enabling MVE %d\n",
+			pe_err(pe, "OPAL error %ld enabling MVE %x\n",
 			       rc, pe->mve_number);
 			pe->mve_number = -1;
 		}
@@ -1159,10 +1159,10 @@ static struct pnv_ioda_pe *pnv_ioda_setup_bus_PE(struct pci_bus *bus, bool all)
 	pe->rid = bus->busn_res.start << 8;
 
 	if (all)
-		pe_info(pe, "Secondary bus %d..%d associated with PE#%d\n",
+		pe_info(pe, "Secondary bus %d..%d associated with PE#%x\n",
 			bus->busn_res.start, bus->busn_res.end, pe->pe_number);
 	else
-		pe_info(pe, "Secondary bus %d associated with PE#%d\n",
+		pe_info(pe, "Secondary bus %d associated with PE#%x\n",
 			bus->busn_res.start, pe->pe_number);
 
 	if (pnv_ioda_configure_pe(phb, pe)) {
@@ -1213,7 +1213,7 @@ static struct pnv_ioda_pe *pnv_ioda_setup_npu_PE(struct pci_dev *npu_pdev)
 			 * peer NPU.
 			 */
 			dev_info(&npu_pdev->dev,
-				"Associating to existing PE %d\n", pe_num);
+				"Associating to existing PE %x\n", pe_num);
 			pci_dev_get(npu_pdev);
 			npu_pdn = pci_get_pdn(npu_pdev);
 			rid = npu_pdev->bus->number << 8 | npu_pdn->devfn;
@@ -1539,7 +1539,7 @@ static void pnv_ioda_setup_vf_PE(struct pci_dev *pdev, u16 num_vfs)
 		pe->rid = (pci_iov_virtfn_bus(pdev, vf_index) << 8) |
 			   pci_iov_virtfn_devfn(pdev, vf_index);
 
-		pe_info(pe, "VF %04d:%02d:%02d.%d associated with PE#%d\n",
+		pe_info(pe, "VF %04d:%02d:%02d.%d associated with PE#%x\n",
 			hose->global_number, pdev->bus->number,
 			PCI_SLOT(pci_iov_virtfn_devfn(pdev, vf_index)),
 			PCI_FUNC(pci_iov_virtfn_devfn(pdev, vf_index)), pe_num);
@@ -2844,7 +2844,7 @@ static int pnv_pci_ioda_msi_setup(struct pnv_phb *phb, struct pci_dev *dev,
 	pnv_set_msi_irq_chip(phb, virq);
 
 	pr_devel("%s: %s-bit MSI on hwirq %x (xive #%d),"
-		 " address=%x_%08x data=%x PE# %d\n",
+		 " address=%x_%08x data=%x PE# %x\n",
 		 pci_name(dev), is_64 ? "64" : "32", hwirq, xive_num,
 		 msg->address_hi, msg->address_lo, data, pe->pe_number);
 
@@ -2993,7 +2993,7 @@ static void pnv_ioda_setup_pe_res(struct pnv_ioda_pe *pe,
 			rc = opal_pci_map_pe_mmio_window(phb->opal_id,
 				pe->pe_number, OPAL_IO_WINDOW_TYPE, 0, index);
 			if (rc != OPAL_SUCCESS) {
-				pr_err("%s: Error %lld mapping IO segment#%d to PE#%d\n",
+				pr_err("%s: Error %lld mapping IO segment#%d to PE#%x\n",
 				       __func__, rc, index, pe->pe_number);
 				break;
 			}
@@ -3017,7 +3017,7 @@ static void pnv_ioda_setup_pe_res(struct pnv_ioda_pe *pe,
 			rc = opal_pci_map_pe_mmio_window(phb->opal_id,
 				pe->pe_number, OPAL_M32_WINDOW_TYPE, 0, index);
 			if (rc != OPAL_SUCCESS) {
-				pr_err("%s: Error %lld mapping M32 segment#%d to PE#%d",
+				pr_err("%s: Error %lld mapping M32 segment#%d to PE#%x",
 				       __func__, rc, index, pe->pe_number);
 				break;
 			}
@@ -3281,7 +3281,7 @@ static void pnv_pci_setup_bridge(struct pci_bus *bus, unsigned long type)
 		pnv_pci_ioda2_setup_dma_pe(phb, pe);
 		break;
 	default:
-		pr_warn("%s: No DMA for PHB#%d (type %d)\n",
+		pr_warn("%s: No DMA for PHB#%x (type %d)\n",
 			__func__, phb->hose->global_number, phb->type);
 	}
 }
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index db7b8020f68e..c6d554fe585c 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -234,7 +234,7 @@ static void pnv_pci_dump_p7ioc_diag_data(struct pci_controller *hose,
 	int i;
 
 	data = (struct OpalIoP7IOCPhbErrorData *)common;
-	pr_info("P7IOC PHB#%d Diag-data (Version: %d)\n",
+	pr_info("P7IOC PHB#%x Diag-data (Version: %d)\n",
 		hose->global_number, be32_to_cpu(common->version));
 
 	if (data->brdgCtl)
@@ -326,7 +326,7 @@ static void pnv_pci_dump_phb3_diag_data(struct pci_controller *hose,
 	int i;
 
 	data = (struct OpalIoPhb3ErrorData*)common;
-	pr_info("PHB3 PHB#%d Diag-data (Version: %d)\n",
+	pr_info("PHB3 PHB#%x Diag-data (Version: %d)\n",
 		hose->global_number, be32_to_cpu(common->version));
 	if (data->brdgCtl)
 		pr_info("brdgCtl:     %08x\n",
@@ -516,7 +516,7 @@ static void pnv_pci_config_check_eeh(struct pci_dn *pdn)
 		}
 	}
 
-	pr_devel(" -> EEH check, bdfn=%04x PE#%d fstate=%x\n",
+	pr_devel(" -> EEH check, bdfn=%04x PE#%x fstate=%x\n",
 		 (pdn->busno << 8) | (pdn->devfn), pe_no, fstate);
 
 	/* Clear the frozen state if applicable */