summaryrefslogtreecommitdiff
path: root/drivers/char
diff options
context:
space:
mode:
authorAlan Cox <alan@lxorguk.ukuu.org.uk>2006-06-27 02:54:05 -0700
committerLinus Torvalds <torvalds@g5.osdl.org>2006-06-27 17:32:40 -0700
commitb65b5b59f98aa317df399318b0b2770f50732d3c (patch)
treedff57f7773b54b3336e56ab84aa8b4d820797572 /drivers/char
parent33979734cd35ae0624337cdbc529921e4350d96f (diff)
[PATCH] stallion clean up
There are two locking sets involved. One locks the board mappings and the other is the tty open/close locking. The low level code was clearly designed to be ported to OS's with spin locks already so pretty much comes out in the wash Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat (limited to 'drivers/char')
-rw-r--r--drivers/char/stallion.c208
1 files changed, 86 insertions, 122 deletions
diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c
index a9c5a7230f89..bf361a5ba70d 100644
--- a/drivers/char/stallion.c
+++ b/drivers/char/stallion.c
@@ -141,15 +141,6 @@ static char *stl_drvversion = "5.6.0";
static struct tty_driver *stl_serial;
/*
- * We will need to allocate a temporary write buffer for chars that
- * come direct from user space. The problem is that a copy from user
- * space might cause a page fault (typically on a system that is
- * swapping!). All ports will share one buffer - since if the system
- * is already swapping a shared buffer won't make things any worse.
- */
-static char *stl_tmpwritebuf;
-
-/*
* Define a local default termios struct. All ports will be created
* with this termios initially. Basically all it defines is a raw port
* at 9600, 8 data bits, 1 stop bit.
@@ -363,6 +354,14 @@ static unsigned char stl_vecmap[] = {
};
/*
+ * Lock ordering is that you may not take stallion_lock holding
+ * brd_lock.
+ */
+
+static spinlock_t brd_lock; /* Guard the board mapping */
+static spinlock_t stallion_lock; /* Guard the tty driver */
+
+/*
* Set up enable and disable macros for the ECH boards. They require
* the secondary io address space to be activated and deactivated.
* This way all ECH boards can share their secondary io region.
@@ -725,17 +724,7 @@ static struct class *stallion_class;
static int __init stallion_module_init(void)
{
- unsigned long flags;
-
-#ifdef DEBUG
- printk("init_module()\n");
-#endif
-
- save_flags(flags);
- cli();
stl_init();
- restore_flags(flags);
-
return 0;
}
@@ -746,7 +735,6 @@ static void __exit stallion_module_exit(void)
stlbrd_t *brdp;
stlpanel_t *panelp;
stlport_t *portp;
- unsigned long flags;
int i, j, k;
#ifdef DEBUG
@@ -756,9 +744,6 @@ static void __exit stallion_module_exit(void)
printk(KERN_INFO "Unloading %s: version %s\n", stl_drvtitle,
stl_drvversion);
- save_flags(flags);
- cli();
-
/*
* Free up all allocated resources used by the ports. This includes
* memory and interrupts. As part of this process we will also do
@@ -770,7 +755,6 @@ static void __exit stallion_module_exit(void)
if (i) {
printk("STALLION: failed to un-register tty driver, "
"errno=%d\n", -i);
- restore_flags(flags);
return;
}
for (i = 0; i < 4; i++) {
@@ -783,8 +767,6 @@ static void __exit stallion_module_exit(void)
"errno=%d\n", -i);
class_destroy(stallion_class);
- kfree(stl_tmpwritebuf);
-
for (i = 0; (i < stl_nrbrds); i++) {
if ((brdp = stl_brds[i]) == (stlbrd_t *) NULL)
continue;
@@ -814,8 +796,6 @@ static void __exit stallion_module_exit(void)
kfree(brdp);
stl_brds[i] = (stlbrd_t *) NULL;
}
-
- restore_flags(flags);
}
module_init(stallion_module_init);
@@ -948,7 +928,7 @@ static stlbrd_t *stl_allocbrd(void)
brdp = kzalloc(sizeof(stlbrd_t), GFP_KERNEL);
if (!brdp) {
- printk("STALLION: failed to allocate memory (size=%d)\n",
+ printk("STALLION: failed to allocate memory (size=%Zd)\n",
sizeof(stlbrd_t));
return NULL;
}
@@ -1066,16 +1046,17 @@ static int stl_waitcarrier(stlport_t *portp, struct file *filp)
rc = 0;
doclocal = 0;
+ spin_lock_irqsave(&stallion_lock, flags);
+
if (portp->tty->termios->c_cflag & CLOCAL)
doclocal++;
- save_flags(flags);
- cli();
portp->openwaitcnt++;
if (! tty_hung_up_p(filp))
portp->refcount--;
for (;;) {
+ /* Takes brd_lock internally */
stl_setsignals(portp, 1, 1);
if (tty_hung_up_p(filp) ||
((portp->flags & ASYNC_INITIALIZED) == 0)) {
@@ -1093,13 +1074,14 @@ static int stl_waitcarrier(stlport_t *portp, struct file *filp)
rc = -ERESTARTSYS;
break;
}
+ /* FIXME */
interruptible_sleep_on(&portp->open_wait);
}
if (! tty_hung_up_p(filp))
portp->refcount++;
portp->openwaitcnt--;
- restore_flags(flags);
+ spin_unlock_irqrestore(&stallion_lock, flags);
return rc;
}
@@ -1119,16 +1101,15 @@ static void stl_close(struct tty_struct *tty, struct file *filp)
if (portp == (stlport_t *) NULL)
return;
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&stallion_lock, flags);
if (tty_hung_up_p(filp)) {
- restore_flags(flags);
+ spin_unlock_irqrestore(&stallion_lock, flags);
return;
}
if ((tty->count == 1) && (portp->refcount != 1))
portp->refcount = 1;
if (portp->refcount-- > 1) {
- restore_flags(flags);
+ spin_unlock_irqrestore(&stallion_lock, flags);
return;
}
@@ -1142,11 +1123,18 @@ static void stl_close(struct tty_struct *tty, struct file *filp)
* (The sc26198 has no "end-of-data" interrupt only empty FIFO)
*/
tty->closing = 1;
+
+ spin_unlock_irqrestore(&stallion_lock, flags);
+
if (portp->closing_wait != ASYNC_CLOSING_WAIT_NONE)
tty_wait_until_sent(tty, portp->closing_wait);
stl_waituntilsent(tty, (HZ / 2));
+
+ spin_lock_irqsave(&stallion_lock, flags);
portp->flags &= ~ASYNC_INITIALIZED;
+ spin_unlock_irqrestore(&stallion_lock, flags);
+
stl_disableintrs(portp);
if (tty->termios->c_cflag & HUPCL)
stl_setsignals(portp, 0, 0);
@@ -1173,7 +1161,6 @@ static void stl_close(struct tty_struct *tty, struct file *filp)
portp->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
wake_up_interruptible(&portp->close_wait);
- restore_flags(flags);
}
/*****************************************************************************/
@@ -1195,9 +1182,6 @@ static int stl_write(struct tty_struct *tty, const unsigned char *buf, int count
(int) tty, (int) buf, count);
#endif
- if ((tty == (struct tty_struct *) NULL) ||
- (stl_tmpwritebuf == (char *) NULL))
- return 0;
portp = tty->driver_data;
if (portp == (stlport_t *) NULL)
return 0;
@@ -1302,11 +1286,6 @@ static void stl_flushchars(struct tty_struct *tty)
if (portp->tx.buf == (char *) NULL)
return;
-#if 0
- if (tty->stopped || tty->hw_stopped ||
- (portp->tx.head == portp->tx.tail))
- return;
-#endif
stl_startrxtx(portp, -1, 1);
}
@@ -1977,12 +1956,14 @@ static int stl_eiointr(stlbrd_t *brdp)
unsigned int iobase;
int handled = 0;
+ spin_lock(&brd_lock);
panelp = brdp->panels[0];
iobase = panelp->iobase;
while (inb(brdp->iostatus) & EIO_INTRPEND) {
handled = 1;
(* panelp->isr)(panelp, iobase);
}
+ spin_unlock(&brd_lock);
return handled;
}
@@ -2168,7 +2149,7 @@ static int __init stl_initports(stlbrd_t *brdp, stlpanel_t *panelp)
portp = kzalloc(sizeof(stlport_t), GFP_KERNEL);
if (!portp) {
printk("STALLION: failed to allocate memory "
- "(size=%d)\n", sizeof(stlport_t));
+ "(size=%Zd)\n", sizeof(stlport_t));
break;
}
@@ -2304,7 +2285,7 @@ static inline int stl_initeio(stlbrd_t *brdp)
panelp = kzalloc(sizeof(stlpanel_t), GFP_KERNEL);
if (!panelp) {
printk(KERN_WARNING "STALLION: failed to allocate memory "
- "(size=%d)\n", sizeof(stlpanel_t));
+ "(size=%Zd)\n", sizeof(stlpanel_t));
return -ENOMEM;
}
@@ -2478,7 +2459,7 @@ static inline int stl_initech(stlbrd_t *brdp)
panelp = kzalloc(sizeof(stlpanel_t), GFP_KERNEL);
if (!panelp) {
printk("STALLION: failed to allocate memory "
- "(size=%d)\n", sizeof(stlpanel_t));
+ "(size=%Zd)\n", sizeof(stlpanel_t));
break;
}
panelp->magic = STL_PANELMAGIC;
@@ -2879,8 +2860,7 @@ static int stl_getportstats(stlport_t *portp, comstats_t __user *cp)
portp->stats.lflags = 0;
portp->stats.rxbuffered = 0;
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&stallion_lock, flags);
if (portp->tty != (struct tty_struct *) NULL) {
if (portp->tty->driver_data == portp) {
portp->stats.ttystate = portp->tty->flags;
@@ -2894,7 +2874,7 @@ static int stl_getportstats(stlport_t *portp, comstats_t __user *cp)
}
}
}
- restore_flags(flags);
+ spin_unlock_irqrestore(&stallion_lock, flags);
head = portp->tx.head;
tail = portp->tx.tail;
@@ -3056,14 +3036,6 @@ static int __init stl_init(void)
return -1;
/*
- * Allocate a temporary write buffer.
- */
- stl_tmpwritebuf = kmalloc(STL_TXBUFSIZE, GFP_KERNEL);
- if (!stl_tmpwritebuf)
- printk("STALLION: failed to allocate memory (size=%d)\n",
- STL_TXBUFSIZE);
-
-/*
* Set up a character driver for per board stuff. This is mainly used
* to do stats ioctls on the ports.
*/
@@ -3147,11 +3119,13 @@ static int stl_cd1400panelinit(stlbrd_t *brdp, stlpanel_t *panelp)
unsigned int gfrcr;
int chipmask, i, j;
int nrchips, uartaddr, ioaddr;
+ unsigned long flags;
#ifdef DEBUG
printk("stl_panelinit(brdp=%x,panelp=%x)\n", (int) brdp, (int) panelp);
#endif
+ spin_lock_irqsave(&brd_lock, flags);
BRDENABLE(panelp->brdnr, panelp->pagenr);
/*
@@ -3189,6 +3163,7 @@ static int stl_cd1400panelinit(stlbrd_t *brdp, stlpanel_t *panelp)
}
BRDDISABLE(panelp->brdnr);
+ spin_unlock_irqrestore(&brd_lock, flags);
return chipmask;
}
@@ -3200,6 +3175,7 @@ static int stl_cd1400panelinit(stlbrd_t *brdp, stlpanel_t *panelp)
static void stl_cd1400portinit(stlbrd_t *brdp, stlpanel_t *panelp, stlport_t *portp)
{
+ unsigned long flags;
#ifdef DEBUG
printk("stl_cd1400portinit(brdp=%x,panelp=%x,portp=%x)\n",
(int) brdp, (int) panelp, (int) portp);
@@ -3209,6 +3185,7 @@ static void stl_cd1400portinit(stlbrd_t *brdp, stlpanel_t *panelp, stlport_t *po
(portp == (stlport_t *) NULL))
return;
+ spin_lock_irqsave(&brd_lock, flags);
portp->ioaddr = panelp->iobase + (((brdp->brdtype == BRD_ECHPCI) ||
(portp->portnr < 8)) ? 0 : EREG_BANKSIZE);
portp->uartaddr = (portp->portnr & 0x04) << 5;
@@ -3219,6 +3196,7 @@ static void stl_cd1400portinit(stlbrd_t *brdp, stlpanel_t *panelp, stlport_t *po
stl_cd1400setreg(portp, LIVR, (portp->portnr << 3));
portp->hwid = stl_cd1400getreg(portp, GFRCR);
BRDDISABLE(portp->brdnr);
+ spin_unlock_irqrestore(&brd_lock, flags);
}
/*****************************************************************************/
@@ -3428,8 +3406,7 @@ static void stl_cd1400setport(stlport_t *portp, struct termios *tiosp)
tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP]);
#endif
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&brd_lock, flags);
BRDENABLE(portp->brdnr, portp->pagenr);
stl_cd1400setreg(portp, CAR, (portp->portnr & 0x3));
srer = stl_cd1400getreg(portp, SRER);
@@ -3466,7 +3443,7 @@ static void stl_cd1400setport(stlport_t *portp, struct termios *tiosp)
portp->sigs &= ~TIOCM_CD;
stl_cd1400setreg(portp, SRER, ((srer & ~sreroff) | sreron));
BRDDISABLE(portp->brdnr);
- restore_flags(flags);
+ spin_unlock_irqrestore(&brd_lock, flags);
}
/*****************************************************************************/
@@ -3492,8 +3469,7 @@ static void stl_cd1400setsignals(stlport_t *portp, int dtr, int rts)
if (rts > 0)
msvr2 = MSVR2_RTS;
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&brd_lock, flags);
BRDENABLE(portp->brdnr, portp->pagenr);
stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
if (rts >= 0)
@@ -3501,7 +3477,7 @@ static void stl_cd1400setsignals(stlport_t *portp, int dtr, int rts)
if (dtr >= 0)
stl_cd1400setreg(portp, MSVR1, msvr1);
BRDDISABLE(portp->brdnr);
- restore_flags(flags);
+ spin_unlock_irqrestore(&brd_lock, flags);
}
/*****************************************************************************/
@@ -3520,14 +3496,13 @@ static int stl_cd1400getsignals(stlport_t *portp)
printk("stl_cd1400getsignals(portp=%x)\n", (int) portp);
#endif
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&brd_lock, flags);
BRDENABLE(portp->brdnr, portp->pagenr);
stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
msvr1 = stl_cd1400getreg(portp, MSVR1);
msvr2 = stl_cd1400getreg(portp, MSVR2);
BRDDISABLE(portp->brdnr);
- restore_flags(flags);
+ spin_unlock_irqrestore(&brd_lock, flags);
sigs = 0;
sigs |= (msvr1 & MSVR1_DCD) ? TIOCM_CD : 0;
@@ -3569,15 +3544,14 @@ static void stl_cd1400enablerxtx(stlport_t *portp, int rx, int tx)
else if (rx > 0)
ccr |= CCR_RXENABLE;
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&brd_lock, flags);
BRDENABLE(portp->brdnr, portp->pagenr);
stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
stl_cd1400ccrwait(portp);
stl_cd1400setreg(portp, CCR, ccr);
stl_cd1400ccrwait(portp);
BRDDISABLE(portp->brdnr);
- restore_flags(flags);
+ spin_unlock_irqrestore(&brd_lock, flags);
}
/*****************************************************************************/
@@ -3609,8 +3583,7 @@ static void stl_cd1400startrxtx(stlport_t *portp, int rx, int tx)
else if (rx > 0)
sreron |= SRER_RXDATA;
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&brd_lock, flags);
BRDENABLE(portp->brdnr, portp->pagenr);
stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
stl_cd1400setreg(portp, SRER,
@@ -3618,7 +3591,7 @@ static void stl_cd1400startrxtx(stlport_t *portp, int rx, int tx)
BRDDISABLE(portp->brdnr);
if (tx > 0)
set_bit(ASYI_TXBUSY, &portp->istate);
- restore_flags(flags);
+ spin_unlock_irqrestore(&brd_lock, flags);
}
/*****************************************************************************/
@@ -3634,13 +3607,12 @@ static void stl_cd1400disableintrs(stlport_t *portp)
#ifdef DEBUG
printk("stl_cd1400disableintrs(portp=%x)\n", (int) portp);
#endif
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&brd_lock, flags);
BRDENABLE(portp->brdnr, portp->pagenr);
stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
stl_cd1400setreg(portp, SRER, 0);
BRDDISABLE(portp->brdnr);
- restore_flags(flags);
+ spin_unlock_irqrestore(&brd_lock, flags);
}
/*****************************************************************************/
@@ -3653,8 +3625,7 @@ static void stl_cd1400sendbreak(stlport_t *portp, int len)
printk("stl_cd1400sendbreak(portp=%x,len=%d)\n", (int) portp, len);
#endif
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&brd_lock, flags);
BRDENABLE(portp->brdnr, portp->pagenr);
stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
stl_cd1400setreg(portp, SRER,
@@ -3664,7 +3635,7 @@ static void stl_cd1400sendbreak(stlport_t *portp, int len)
portp->brklen = len;
if (len == 1)
portp->stats.txbreaks++;
- restore_flags(flags);
+ spin_unlock_irqrestore(&brd_lock, flags);
}
/*****************************************************************************/
@@ -3688,8 +3659,7 @@ static void stl_cd1400flowctrl(stlport_t *portp, int state)
if (tty == (struct tty_struct *) NULL)
return;
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&brd_lock, flags);
BRDENABLE(portp->brdnr, portp->pagenr);
stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
@@ -3729,7 +3699,7 @@ static void stl_cd1400flowctrl(stlport_t *portp, int state)
}
BRDDISABLE(portp->brdnr);
- restore_flags(flags);
+ spin_unlock_irqrestore(&brd_lock, flags);
}
/*****************************************************************************/
@@ -3753,8 +3723,7 @@ static void stl_cd1400sendflow(stlport_t *portp, int state)
if (tty == (struct tty_struct *) NULL)
return;
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&brd_lock, flags);
BRDENABLE(portp->brdnr, portp->pagenr);
stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
if (state) {
@@ -3769,7 +3738,7 @@ static void stl_cd1400sendflow(stlport_t *portp, int state)
stl_cd1400ccrwait(portp);
}
BRDDISABLE(portp->brdnr);
- restore_flags(flags);
+ spin_unlock_irqrestore(&brd_lock, flags);
}
/*****************************************************************************/
@@ -3785,8 +3754,7 @@ static void stl_cd1400flush(stlport_t *portp)
if (portp == (stlport_t *) NULL)
return;
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&brd_lock, flags);
BRDENABLE(portp->brdnr, portp->pagenr);
stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
stl_cd1400ccrwait(portp);
@@ -3794,7 +3762,7 @@ static void stl_cd1400flush(stlport_t *portp)
stl_cd1400ccrwait(portp);
portp->tx.tail = portp->tx.head;
BRDDISABLE(portp->brdnr);
- restore_flags(flags);
+ spin_unlock_irqrestore(&brd_lock, flags);
}
/*****************************************************************************/
@@ -3833,6 +3801,7 @@ static void stl_cd1400eiointr(stlpanel_t *panelp, unsigned int iobase)
(int) panelp, iobase);
#endif
+ spin_lock(&brd_lock);
outb(SVRR, iobase);
svrtype = inb(iobase + EREG_DATA);
if (panelp->nrports > 4) {
@@ -3846,6 +3815,8 @@ static void stl_cd1400eiointr(stlpanel_t *panelp, unsigned int iobase)
stl_cd1400txisr(panelp, iobase);
else if (svrtype & SVRR_MDM)
stl_cd1400mdmisr(panelp, iobase);
+
+ spin_unlock(&brd_lock);
}
/*****************************************************************************/
@@ -4433,8 +4404,7 @@ static void stl_sc26198setport(stlport_t *portp, struct termios *tiosp)
tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP]);
#endif
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&brd_lock, flags);
BRDENABLE(portp->brdnr, portp->pagenr);
stl_sc26198setreg(portp, IMR, 0);
stl_sc26198updatereg(portp, MR0, mr0);
@@ -4461,7 +4431,7 @@ static void stl_sc26198setport(stlport_t *portp, struct termios *tiosp)
portp->imr = (portp->imr & ~imroff) | imron;
stl_sc26198setreg(portp, IMR, portp->imr);
BRDDISABLE(portp->brdnr);
- restore_flags(flags);
+ spin_unlock_irqrestore(&brd_lock, flags);
}
/*****************************************************************************/
@@ -4491,13 +4461,12 @@ static void stl_sc26198setsignals(stlport_t *portp, int dtr, int rts)
else if (rts > 0)
iopioron |= IPR_RTS;
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&brd_lock, flags);
BRDENABLE(portp->brdnr, portp->pagenr);
stl_sc26198setreg(portp, IOPIOR,
((stl_sc26198getreg(portp, IOPIOR) & ~iopioroff) | iopioron));
BRDDISABLE(portp->brdnr);
- restore_flags(flags);
+ spin_unlock_irqrestore(&brd_lock, flags);
}
/*****************************************************************************/
@@ -4516,12 +4485,11 @@ static int stl_sc26198getsignals(stlport_t *portp)
printk("stl_sc26198getsignals(portp=%x)\n", (int) portp);
#endif
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&brd_lock, flags);
BRDENABLE(portp->brdnr, portp->pagenr);
ipr = stl_sc26198getreg(portp, IPR);
BRDDISABLE(portp->brdnr);
- restore_flags(flags);
+ spin_unlock_irqrestore(&brd_lock, flags);
sigs = 0;
sigs |= (ipr & IPR_DCD) ? 0 : TIOCM_CD;
@@ -4558,13 +4526,12 @@ static void stl_sc26198enablerxtx(stlport_t *portp, int rx, int tx)
else if (rx > 0)
ccr |= CR_RXENABLE;
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&brd_lock, flags);
BRDENABLE(portp->brdnr, portp->pagenr);
stl_sc26198setreg(portp, SCCR, ccr);
BRDDISABLE(portp->brdnr);
portp->crenable = ccr;
- restore_flags(flags);
+ spin_unlock_irqrestore(&brd_lock, flags);
}
/*****************************************************************************/
@@ -4593,15 +4560,14 @@ static void stl_sc26198startrxtx(stlport_t *portp, int rx, int tx)
else if (rx > 0)
imr |= IR_RXRDY | IR_RXBREAK | IR_RXWATCHDOG;
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&brd_lock, flags);
BRDENABLE(portp->brdnr, portp->pagenr);
stl_sc26198setreg(portp, IMR, imr);
BRDDISABLE(portp->brdnr);
portp->imr = imr;
if (tx > 0)
set_bit(ASYI_TXBUSY, &portp->istate);
- restore_flags(flags);
+ spin_unlock_irqrestore(&brd_lock, flags);
}
/*****************************************************************************/
@@ -4618,13 +4584,12 @@ static void stl_sc26198disableintrs(stlport_t *portp)
printk("stl_sc26198disableintrs(portp=%x)\n", (int) portp);
#endif
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&brd_lock, flags);
BRDENABLE(portp->brdnr, portp->pagenr);
portp->imr = 0;
stl_sc26198setreg(portp, IMR, 0);
BRDDISABLE(portp->brdnr);
- restore_flags(flags);
+ spin_unlock_irqrestore(&brd_lock, flags);
}
/*****************************************************************************/
@@ -4637,8 +4602,7 @@ static void stl_sc26198sendbreak(stlport_t *portp, int len)
printk("stl_sc26198sendbreak(portp=%x,len=%d)\n", (int) portp, len);
#endif
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&brd_lock, flags);
BRDENABLE(portp->brdnr, portp->pagenr);
if (len == 1) {
stl_sc26198setreg(portp, SCCR, CR_TXSTARTBREAK);
@@ -4647,7 +4611,7 @@ static void stl_sc26198sendbreak(stlport_t *portp, int len)
stl_sc26198setreg(portp, SCCR, CR_TXSTOPBREAK);
}
BRDDISABLE(portp->brdnr);
- restore_flags(flags);
+ spin_unlock_irqrestore(&brd_lock, flags);
}
/*****************************************************************************/
@@ -4672,8 +4636,7 @@ static void stl_sc26198flowctrl(stlport_t *portp, int state)
if (tty == (struct tty_struct *) NULL)
return;
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&brd_lock, flags);
BRDENABLE(portp->brdnr, portp->pagenr);
if (state) {
@@ -4719,7 +4682,7 @@ static void stl_sc26198flowctrl(stlport_t *portp, int state)
}
BRDDISABLE(portp->brdnr);
- restore_flags(flags);
+ spin_unlock_irqrestore(&brd_lock, flags);
}
/*****************************************************************************/
@@ -4744,8 +4707,7 @@ static void stl_sc26198sendflow(stlport_t *portp, int state)
if (tty == (struct tty_struct *) NULL)
return;
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&brd_lock, flags);
BRDENABLE(portp->brdnr, portp->pagenr);
if (state) {
mr0 = stl_sc26198getreg(portp, MR0);
@@ -4765,7 +4727,7 @@ static void stl_sc26198sendflow(stlport_t *portp, int state)
stl_sc26198setreg(portp, MR0, mr0);
}
BRDDISABLE(portp->brdnr);
- restore_flags(flags);
+ spin_unlock_irqrestore(&brd_lock, flags);
}
/*****************************************************************************/
@@ -4781,14 +4743,13 @@ static void stl_sc26198flush(stlport_t *portp)
if (portp == (stlport_t *) NULL)
return;
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&brd_lock, flags);
BRDENABLE(portp->brdnr, portp->pagenr);
stl_sc26198setreg(portp, SCCR, CR_TXRESET);
stl_sc26198setreg(portp, SCCR, portp->crenable);
BRDDISABLE(portp->brdnr);
portp->tx.tail = portp->tx.head;
- restore_flags(flags);
+ spin_unlock_irqrestore(&brd_lock, flags);
}
/*****************************************************************************/
@@ -4815,12 +4776,11 @@ static int stl_sc26198datastate(stlport_t *portp)
if (test_bit(ASYI_TXBUSY, &portp->istate))
return 1;
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&brd_lock, flags);
BRDENABLE(portp->brdnr, portp->pagenr);
sr = stl_sc26198getreg(portp, SR);
BRDDISABLE(portp->brdnr);
- restore_flags(flags);
+ spin_unlock_irqrestore(&brd_lock, flags);
return (sr & SR_TXEMPTY) ? 0 : 1;
}
@@ -4878,6 +4838,8 @@ static void stl_sc26198intr(stlpanel_t *panelp, unsigned int iobase)
stlport_t *portp;
unsigned int iack;
+ spin_lock(&brd_lock);
+
/*
* Work around bug in sc26198 chip... Cannot have A6 address
* line of UART high, else iack will be returned as 0.
@@ -4893,6 +4855,8 @@ static void stl_sc26198intr(stlpanel_t *panelp, unsigned int iobase)
stl_sc26198txisr(portp);
else
stl_sc26198otherisr(portp, iack);
+
+ spin_unlock(&brd_lock);
}
/*****************************************************************************/