ide: remove the legacy ide driver

The legay ide driver has been replace with libata starting in 2003 and has
been scheduled for removal for a while.  Finally kill it off so that we
can start cleaning up various bits of cruft it forced on the block layer.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

1 files changed, 0 insertions, 294 deletions

diff --git a/drivers/ide/cs5536.c b/drivers/ide/cs5536.c
deleted file mode 100644
index 8b5ca145191b..000000000000
--- a/drivers/ide/cs5536.c
+++ /dev/null
@@ -1,294 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * CS5536 PATA support
- * (C) 2007 Martin K. Petersen <mkp@mkp.net>
- * (C) 2009 Bartlomiej Zolnierkiewicz
- *
- * Documentation:
- *	Available from AMD web site.
- *
- * The IDE timing registers for the CS5536 live in the Geode Machine
- * Specific Register file and not PCI config space.  Most BIOSes
- * virtualize the PCI registers so the chip looks like a standard IDE
- * controller.  Unfortunately not all implementations get this right.
- * In particular some have problems with unaligned accesses to the
- * virtualized PCI registers.  This driver always does full dword
- * writes to work around the issue.  Also, in case of a bad BIOS this
- * driver can be loaded with the "msr=1" parameter which forces using
- * the Machine Specific Registers to configure the device.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/ide.h>
-#include <asm/msr.h>
-
-#define DRV_NAME	"cs5536"
-
-enum {
-	MSR_IDE_CFG		= 0x51300010,
-	PCI_IDE_CFG		= 0x40,
-
-	CFG			= 0,
-	DTC			= 2,
-	CAST			= 3,
-	ETC			= 4,
-
-	IDE_CFG_CHANEN		= (1 << 1),
-	IDE_CFG_CABLE		= (1 << 17) | (1 << 16),
-
-	IDE_D0_SHIFT		= 24,
-	IDE_D1_SHIFT		= 16,
-	IDE_DRV_MASK		= 0xff,
-
-	IDE_CAST_D0_SHIFT	= 6,
-	IDE_CAST_D1_SHIFT	= 4,
-	IDE_CAST_DRV_MASK	= 0x3,
-
-	IDE_CAST_CMD_SHIFT	= 24,
-	IDE_CAST_CMD_MASK	= 0xff,
-
-	IDE_ETC_UDMA_MASK	= 0xc0,
-};
-
-static int use_msr;
-
-static int cs5536_read(struct pci_dev *pdev, int reg, u32 *val)
-{
-	if (unlikely(use_msr)) {
-		u32 dummy;
-
-		rdmsr(MSR_IDE_CFG + reg, *val, dummy);
-		return 0;
-	}
-
-	return pci_read_config_dword(pdev, PCI_IDE_CFG + reg * 4, val);
-}
-
-static int cs5536_write(struct pci_dev *pdev, int reg, int val)
-{
-	if (unlikely(use_msr)) {
-		wrmsr(MSR_IDE_CFG + reg, val, 0);
-		return 0;
-	}
-
-	return pci_write_config_dword(pdev, PCI_IDE_CFG + reg * 4, val);
-}
-
-static void cs5536_program_dtc(ide_drive_t *drive, u8 tim)
-{
-	struct pci_dev *pdev = to_pci_dev(drive->hwif->dev);
-	int dshift = (drive->dn & 1) ? IDE_D1_SHIFT : IDE_D0_SHIFT;
-	u32 dtc;
-
-	cs5536_read(pdev, DTC, &dtc);
-	dtc &= ~(IDE_DRV_MASK << dshift);
-	dtc |= tim << dshift;
-	cs5536_write(pdev, DTC, dtc);
-}
-
-/**
- *	cs5536_cable_detect	-	detect cable type
- *	@hwif: Port to detect on
- *
- *	Perform cable detection for ATA66 capable cable.
- *
- *	Returns a cable type.
- */
-
-static u8 cs5536_cable_detect(ide_hwif_t *hwif)
-{
-	struct pci_dev *pdev = to_pci_dev(hwif->dev);
-	u32 cfg;
-
-	cs5536_read(pdev, CFG, &cfg);
-
-	if (cfg & IDE_CFG_CABLE)
-		return ATA_CBL_PATA80;
-	else
-		return ATA_CBL_PATA40;
-}
-
-/**
- *	cs5536_set_pio_mode		-	PIO timing setup
- *	@hwif: ATA port
- *	@drive: ATA device
- */
-
-static void cs5536_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
-	static const u8 drv_timings[5] = {
-		0x98, 0x55, 0x32, 0x21, 0x20,
-	};
-
-	static const u8 addr_timings[5] = {
-		0x2, 0x1, 0x0, 0x0, 0x0,
-	};
-
-	static const u8 cmd_timings[5] = {
-		0x99, 0x92, 0x90, 0x22, 0x20,
-	};
-
-	struct pci_dev *pdev = to_pci_dev(hwif->dev);
-	ide_drive_t *pair = ide_get_pair_dev(drive);
-	int cshift = (drive->dn & 1) ? IDE_CAST_D1_SHIFT : IDE_CAST_D0_SHIFT;
-	unsigned long timings = (unsigned long)ide_get_drivedata(drive);
-	u32 cast;
-	const u8 pio = drive->pio_mode - XFER_PIO_0;
-	u8 cmd_pio = pio;
-
-	if (pair)
-		cmd_pio = min_t(u8, pio, pair->pio_mode - XFER_PIO_0);
-
-	timings &= (IDE_DRV_MASK << 8);
-	timings |= drv_timings[pio];
-	ide_set_drivedata(drive, (void *)timings);
-
-	cs5536_program_dtc(drive, drv_timings[pio]);
-
-	cs5536_read(pdev, CAST, &cast);
-
-	cast &= ~(IDE_CAST_DRV_MASK << cshift);
-	cast |= addr_timings[pio] << cshift;
-
-	cast &= ~(IDE_CAST_CMD_MASK << IDE_CAST_CMD_SHIFT);
-	cast |= cmd_timings[cmd_pio] << IDE_CAST_CMD_SHIFT;
-
-	cs5536_write(pdev, CAST, cast);
-}
-
-/**
- *	cs5536_set_dma_mode		-	DMA timing setup
- *	@hwif: ATA port
- *	@drive: ATA device
- */
-
-static void cs5536_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
-	static const u8 udma_timings[6] = {
-		0xc2, 0xc1, 0xc0, 0xc4, 0xc5, 0xc6,
-	};
-
-	static const u8 mwdma_timings[3] = {
-		0x67, 0x21, 0x20,
-	};
-
-	struct pci_dev *pdev = to_pci_dev(hwif->dev);
-	int dshift = (drive->dn & 1) ? IDE_D1_SHIFT : IDE_D0_SHIFT;
-	unsigned long timings = (unsigned long)ide_get_drivedata(drive);
-	u32 etc;
-	const u8 mode = drive->dma_mode;
-
-	cs5536_read(pdev, ETC, &etc);
-
-	if (mode >= XFER_UDMA_0) {
-		etc &= ~(IDE_DRV_MASK << dshift);
-		etc |= udma_timings[mode - XFER_UDMA_0] << dshift;
-	} else { /* MWDMA */
-		etc &= ~(IDE_ETC_UDMA_MASK << dshift);
-		timings &= IDE_DRV_MASK;
-		timings |= mwdma_timings[mode - XFER_MW_DMA_0] << 8;
-		ide_set_drivedata(drive, (void *)timings);
-	}
-
-	cs5536_write(pdev, ETC, etc);
-}
-
-static void cs5536_dma_start(ide_drive_t *drive)
-{
-	unsigned long timings = (unsigned long)ide_get_drivedata(drive);
-
-	if (drive->current_speed < XFER_UDMA_0 &&
-	    (timings >> 8) != (timings & IDE_DRV_MASK))
-		cs5536_program_dtc(drive, timings >> 8);
-
-	ide_dma_start(drive);
-}
-
-static int cs5536_dma_end(ide_drive_t *drive)
-{
-	int ret = ide_dma_end(drive);
-	unsigned long timings = (unsigned long)ide_get_drivedata(drive);
-
-	if (drive->current_speed < XFER_UDMA_0 &&
-	    (timings >> 8) != (timings & IDE_DRV_MASK))
-		cs5536_program_dtc(drive, timings & IDE_DRV_MASK);
-
-	return ret;
-}
-
-static const struct ide_port_ops cs5536_port_ops = {
-	.set_pio_mode		= cs5536_set_pio_mode,
-	.set_dma_mode		= cs5536_set_dma_mode,
-	.cable_detect		= cs5536_cable_detect,
-};
-
-static const struct ide_dma_ops cs5536_dma_ops = {
-	.dma_host_set		= ide_dma_host_set,
-	.dma_setup		= ide_dma_setup,
-	.dma_start		= cs5536_dma_start,
-	.dma_end		= cs5536_dma_end,
-	.dma_test_irq		= ide_dma_test_irq,
-	.dma_lost_irq		= ide_dma_lost_irq,
-	.dma_timer_expiry	= ide_dma_sff_timer_expiry,
-	.dma_sff_read_status	= ide_dma_sff_read_status,
-};
-
-static const struct ide_port_info cs5536_info = {
-	.name		= DRV_NAME,
-	.port_ops	= &cs5536_port_ops,
-	.dma_ops	= &cs5536_dma_ops,
-	.host_flags	= IDE_HFLAG_SINGLE,
-	.pio_mask	= ATA_PIO4,
-	.mwdma_mask	= ATA_MWDMA2,
-	.udma_mask	= ATA_UDMA5,
-};
-
-/**
- *	cs5536_init_one
- *	@dev: PCI device
- *	@id: Entry in match table
- */
-
-static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
-	u32 cfg;
-
-	if (use_msr)
-		printk(KERN_INFO DRV_NAME ": Using MSR regs instead of PCI\n");
-
-	cs5536_read(dev, CFG, &cfg);
-
-	if ((cfg & IDE_CFG_CHANEN) == 0) {
-		printk(KERN_ERR DRV_NAME ": disabled by BIOS\n");
-		return -ENODEV;
-	}
-
-	return ide_pci_init_one(dev, &cs5536_info, NULL);
-}
-
-static const struct pci_device_id cs5536_pci_tbl[] = {
-	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_IDE), },
-	{ },
-};
-
-static struct pci_driver cs5536_pci_driver = {
-	.name		= DRV_NAME,
-	.id_table	= cs5536_pci_tbl,
-	.probe		= cs5536_init_one,
-	.remove		= ide_pci_remove,
-	.suspend	= ide_pci_suspend,
-	.resume		= ide_pci_resume,
-};
-
-module_pci_driver(cs5536_pci_driver);
-
-MODULE_AUTHOR("Martin K. Petersen, Bartlomiej Zolnierkiewicz");
-MODULE_DESCRIPTION("low-level driver for the CS5536 IDE controller");
-MODULE_LICENSE("GPL");
-MODULE_DEVICE_TABLE(pci, cs5536_pci_tbl);
-
-module_param_named(msr, use_msr, int, 0644);
-MODULE_PARM_DESC(msr, "Force using MSR to configure IDE function (Default: 0)");