Merge tag 'iio-for-4.9b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of iio new device support, features and cleanups for the 4.9 cycle.

New device support
* ad8801 dac
  - new driver supporting ad8801 and ad8803 DACs.
* adc12138
  - new driver supporting TI adc12130/adc12132 and adc12138 ADCs.
* ltc2485 adc
  - new driver
* mxc6255
  - add support for the mxc6225 part name and fixup the ID check so it works.
* vz89x VOC sensor
  - add support for the vz89te part which drops the voc_short channel and adds
    CRCs compared to other supported parts.

New features
* core
  - immutable triggers.  These effectively grant exclusive control over a
    trigger. The typical usecase is a device representing an analog part
    (perhaps a MUX) that needs to control the sampling of a downstream
    ADC.
  - resource managed trigger registration and triggered_buffer_init.
  - iio_push_event now protected against case of the event interface
    registration not having yet occured.  Only matters if an interrupt
    can occur during this window - might happen on shared interrupt lines.
  - helper to let a driver query if the trigger it is using is provided by
    itself (using the convention of both device and trigger having the same
    parent).
* tools
  - iio-utils. Used channel modifier scaling in preference to generic scaling
    when both exist.
* at91-adc
  - Add support for touchscreen switches closure time needed by some newer
    parts.
* stx104
  - support the ADC channels on this ADC/DAC board. As these are the primary
    feature of the board also move the driver to the iio/adc directory.
* sx9500
  - device tree bindings.

Cleanups / Fixes
* ad5755
  - fix an off-by-one on devnr limit check (introduced earlier this cycle)
* ad7266
  - drop NULL check on devm_regulator_get_optional as it can't return NULL.
* ak8974
  - avoid an unused functional warning due to rework in PM core code.
  - remove .owner field setting as done by i2c_core.
* ina2xx
  - clear out a left over debug field from chip global data.
* hid-sensors
  - avoid an unused functional warning due to rework in PM core code.
* maxim-thermocouple
  - fix non static symbol warnings.
* ms5611
  - fetch and enable regulators unconditionally when they aren't optional.
* sca3000
  - whitespace cleanup.
* st_sensors
  - fetch and enable regulators unconditionally rather than having them
    supported as optional regulators (missunderstanding on my part amongst
    others a while back)
  - followup to previous patch fixes error checking on the regulators.
  - mark symbols static where possible.
  - use the 'is it my trigger' help function.  This prevents the odd case
    of another device triggering from the st-sensors trigger whilst the
    st-sensors trigger is itself not using it but rather using say an hrtimer.
* ti-ads1015
  - add missing of_node_put.
* vz89x
  - rework to all support of new devices.
  - prevent reading of a corrupted buffer.
  - fixup a return value of 0/1 in a bool returning function.

Address updates
- Vlad Dogaru email address change.

1 files changed, 36 insertions, 0 deletions

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 586830ec8800..7edcf3238620 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -264,6 +264,15 @@ config LPC18XX_ADC
 	  To compile this driver as a module, choose M here: the module will be
 	  called lpc18xx_adc.
 
+config LTC2485
+	tristate "Linear Technology LTC2485 ADC driver"
+	depends on I2C
+	help
+	  Say yes here to build support for Linear Technology LTC2485 ADC.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called ltc2485.
+
 config MAX1027
 	tristate "Maxim max1027 ADC driver"
 	depends on SPI
@@ -410,6 +419,21 @@ config ROCKCHIP_SARADC
 	  To compile this driver as a module, choose M here: the
 	  module will be called rockchip_saradc.
 
+config STX104
+	tristate "Apex Embedded Systems STX104 driver"
+	depends on X86 && ISA_BUS_API
+	select GPIOLIB
+	help
+	  Say yes here to build support for the Apex Embedded Systems STX104
+	  integrated analog PC/104 card.
+
+	  This driver supports the 16 channels of single-ended (8 channels of
+	  differential) analog inputs, 2 channels of analog output, 4 digital
+	  inputs, and 4 digital outputs provided by the STX104.
+
+	  The base port addresses for the devices may be configured via the base
+	  array module parameter.
+
 config TI_ADC081C
 	tristate "Texas Instruments ADC081C/ADC101C/ADC121C family"
 	depends on I2C
@@ -430,6 +454,18 @@ config TI_ADC0832
 	  This driver can also be built as a module. If so, the module will be
 	  called ti-adc0832.
 
+config TI_ADC12138
+	tristate "Texas Instruments ADC12130/ADC12132/ADC12138"
+	depends on SPI
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  If you say yes here you get support for Texas Instruments ADC12130,
+	  ADC12132 and ADC12138 chips.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called ti-adc12138.
+
 config TI_ADC128S052
 	tristate "Texas Instruments ADC128S052/ADC122S021/ADC124S021"
 	depends on SPI