diff options
| author | Magnus Damm <damm+renesas@opensource.se> | 2016-02-16 13:06:41 +0900 |
|---|---|---|
| committer | Sasha Levin <sasha.levin@oracle.com> | 2016-04-18 08:50:59 -0400 |
| commit | 4084f3ab4ddb216046de8e3d8652398e9477c03e (patch) | |
| tree | 9f488a61c139f875409984d7c286e23664d8657f /drivers/mmc/host | |
| parent | 44a3704dbaf34034426db30963d453d1796693fe (diff) | |
mmc: mmc_spi: Add Card Detect comments and fix CD GPIO case
[ Upstream commit bcdc9f260bdce09913db1464be9817170d51044a ]
This patch fixes the MMC SPI driver from doing polling card detect when a
CD GPIO that supports interrupts is specified using the gpios DT property.
Without this patch the DT node below results in the following output:
spi_gpio: spi-gpio { /* SD2 @ CN12 */
compatible = "spi-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpio-sck = <&gpio6 16 GPIO_ACTIVE_HIGH>;
gpio-mosi = <&gpio6 17 GPIO_ACTIVE_HIGH>;
gpio-miso = <&gpio6 18 GPIO_ACTIVE_HIGH>;
num-chipselects = <1>;
cs-gpios = <&gpio6 21 GPIO_ACTIVE_LOW>;
status = "okay";
spi@0 {
compatible = "mmc-spi-slot";
reg = <0>;
voltage-ranges = <3200 3400>;
spi-max-frequency = <25000000>;
gpios = <&gpio6 22 GPIO_ACTIVE_LOW>; /* CD */
};
};
# dmesg | grep mmc
mmc_spi spi32766.0: SD/MMC host mmc0, no WP, no poweroff, cd polling
mmc0: host does not support reading read-only switch, assuming write-enable
mmc0: new SDHC card on SPI
mmcblk0: mmc0:0000 SU04G 3.69 GiB
mmcblk0: p1
With this patch applied the "cd polling" portion above disappears.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Diffstat (limited to 'drivers/mmc/host')
| -rw-r--r-- | drivers/mmc/host/mmc_spi.c | 6 |
1 files changed, 6 insertions, 0 deletions
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c index ae19d83bb9de..055cad1e94d5 100644 --- a/drivers/mmc/host/mmc_spi.c +++ b/drivers/mmc/host/mmc_spi.c @@ -1436,6 +1436,12 @@ static int mmc_spi_probe(struct spi_device *spi) host->pdata->cd_debounce); if (status != 0) goto fail_add_host; + + /* The platform has a CD GPIO signal that may support + * interrupts, so let mmc_gpiod_request_cd_irq() decide + * if polling is needed or not. + */ + mmc->caps &= ~MMC_CAP_NEEDS_POLL; mmc_gpiod_request_cd_irq(mmc); } |