Merge branch 'remotes/lorenzo/pci/dwc'

- Support multiple ATU memory regions (Rob Herring)

- Warn if non-prefetchable memory aperture is > 32-bit (Vidya Sagar)

- Allow programming ATU for >4GB memory (Vidya Sagar)

- Move ATU offset out of driver match data (Rob Herring)

- Move "dbi", "dbi2", and "addr_space" resource setup to common code (Rob
  Herring)

- Remove unneeded function wrappers (Rob Herring)

- Ensure all outbound ATU windows are reset to reduce dependencies on
  bootloader (Rob Herring)

- Use the default MSI irq_chip for dra7xx (Rob Herring)

- Drop the .set_num_vectors() host op (Rob Herring)

- Move MSI interrupt setup into DWC common code (Rob Herring)

- Rework and simplify DWC MSI initialization (Rob Herring)

- Move link handling to DWC common code (Rob Herring)

- Move dw_pcie_msi_init() calls to DWC common code (Rob Herring)

- Move dw_pcie_setup_rc() calls to DWC common code (Rob Herring)

- Remove unnecessary wrappers around dw_pcie_host_init() (Rob Herring)

- Revert "keystone: Drop duplicated 'num-viewport'" to prepare for
  detecting number of iATU regions without help from DT (Rob Herring)

- Move inbound and outbound windows to common struct (Rob Herring)

- Detect number of DWC iATU windows from device registers (Rob Herring)

- Drop samsung,exynos5440-pcie binding (Marek Szyprowski)

- Add samsung,exynos-pcie and samsung,exynos-pcie-phy bindings for
  Exynos5433 variant (Marek Szyprowski)

- Rework phy-exynos-pcie driver to support Exynos5433 PCIe PHY (Jaehoon
  Chung)

- Rework pci-exynos.c to support Exynos5433 PCIe host (Jaehoon Chung)

- Move tegra "dbi" accesses to post common DWC initialization (Vidya Sagar)

- Read tegra dbi" base address in application logic (Vidya Sagar)

- Fix tegra ASPM-L1SS advertisement disable code (Vidya Sagar)

- Set Tegra194 DesignWare IP version to 0x490A (Vidya Sagar)

- Continue tegra unconfig sequence even if parts fail (Vidya Sagar)

- Check return value of tegra_pcie_init_controller() (Vidya Sagar)

- Disable tegra LTSSM during L2 entry (Vidya Sagar)

- Add SM8250 SoC PCIe DT bindings and support (Manivannan Sadhasivam)

- Add SM8250 BDF to SID mapping (Manivannan Sadhasivam)

- Set 32-bit DMA mask for DWC MSI target address allocation (Vidya Sagar)

* remotes/lorenzo/pci/dwc:
  PCI: dwc: Set 32-bit DMA mask for MSI target address allocation
  PCI: qcom: Add support for configuring BDF to SID mapping for SM8250
  PCI: qcom: Add SM8250 SoC support
  dt-bindings: pci: qcom: Document PCIe bindings for SM8250 SoC
  PCI: tegra: Disable LTSSM during L2 entry
  PCI: tegra: Check return value of tegra_pcie_init_controller()
  PCI: tegra: Continue unconfig sequence even if parts fail
  PCI: tegra: Set DesignWare IP version
  PCI: tegra: Fix ASPM-L1SS advertisement disable code
  PCI: tegra: Read "dbi" base address to program in application logic
  PCI: tegra: Move "dbi" accesses to post common DWC initialization
  PCI: dwc: exynos: Rework the driver to support Exynos5433 variant
  phy: samsung: phy-exynos-pcie: rework driver to support Exynos5433 PCIe PHY
  dt-bindings: phy: exynos: add the samsung,exynos-pcie-phy binding
  dt-bindings: PCI: exynos: add the samsung,exynos-pcie binding
  dt-bindings: PCI: exynos: drop samsung,exynos5440-pcie binding
  PCI: dwc: Detect number of iATU windows
  PCI: dwc: Move inbound and outbound windows to common struct
  Revert "PCI: dwc/keystone: Drop duplicated 'num-viewport'"
  PCI: dwc: Remove unnecessary wrappers around dw_pcie_host_init()
  PCI: dwc: Move dw_pcie_setup_rc() to DWC common code
  PCI: dwc: Move dw_pcie_msi_init() into core
  PCI: dwc: Move link handling into common code
  PCI: dwc: Rework MSI initialization
  PCI: dwc: Move MSI interrupt setup into DWC common code
  PCI: dwc: Drop the .set_num_vectors() host op
  PCI: dwc/dra7xx: Use the common MSI irq_chip
  PCI: dwc: Ensure all outbound ATU windows are reset
  PCI: dwc/intel-gw: Remove some unneeded function wrappers
  PCI: dwc: Move "dbi", "dbi2", and "addr_space" resource setup into common code
  PCI: dwc/intel-gw: Move ATU offset out of driver match data
  PCI: dwc: Add support to program ATU for >4GB memory
  PCI: of: Warn if non-prefetchable memory aperture size is > 32-bit
  PCI: dwc: Support multiple ATU memory regions

1 files changed, 7 insertions, 69 deletions

diff --git a/drivers/pci/controller/dwc/pcie-artpec6.c b/drivers/pci/controller/dwc/pcie-artpec6.c
index 929448e9e0bc..597c282f586c 100644
--- a/drivers/pci/controller/dwc/pcie-artpec6.c
+++ b/drivers/pci/controller/dwc/pcie-artpec6.c
@@ -328,10 +328,6 @@ static int artpec6_pcie_host_init(struct pcie_port *pp)
 	artpec6_pcie_init_phy(artpec6_pcie);
 	artpec6_pcie_deassert_core_reset(artpec6_pcie);
 	artpec6_pcie_wait_for_phy(artpec6_pcie);
-	dw_pcie_setup_rc(pp);
-	artpec6_pcie_establish_link(pci);
-	dw_pcie_wait_for_link(pci);
-	dw_pcie_msi_init(pp);
 
 	return 0;
 }
@@ -340,31 +336,6 @@ static const struct dw_pcie_host_ops artpec6_pcie_host_ops = {
 	.host_init = artpec6_pcie_host_init,
 };
 
-static int artpec6_add_pcie_port(struct artpec6_pcie *artpec6_pcie,
-				 struct platform_device *pdev)
-{
-	struct dw_pcie *pci = artpec6_pcie->pci;
-	struct pcie_port *pp = &pci->pp;
-	struct device *dev = pci->dev;
-	int ret;
-
-	if (IS_ENABLED(CONFIG_PCI_MSI)) {
-		pp->msi_irq = platform_get_irq_byname(pdev, "msi");
-		if (pp->msi_irq < 0)
-			return pp->msi_irq;
-	}
-
-	pp->ops = &artpec6_pcie_host_ops;
-
-	ret = dw_pcie_host_init(pp);
-	if (ret) {
-		dev_err(dev, "failed to initialize host\n");
-		return ret;
-	}
-
-	return 0;
-}
-
 static void artpec6_pcie_ep_init(struct dw_pcie_ep *ep)
 {
 	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
@@ -403,38 +374,6 @@ static const struct dw_pcie_ep_ops pcie_ep_ops = {
 	.raise_irq = artpec6_pcie_raise_irq,
 };
 
-static int artpec6_add_pcie_ep(struct artpec6_pcie *artpec6_pcie,
-			       struct platform_device *pdev)
-{
-	int ret;
-	struct dw_pcie_ep *ep;
-	struct resource *res;
-	struct device *dev = &pdev->dev;
-	struct dw_pcie *pci = artpec6_pcie->pci;
-
-	ep = &pci->ep;
-	ep->ops = &pcie_ep_ops;
-
-	pci->dbi_base2 = devm_platform_ioremap_resource_byname(pdev, "dbi2");
-	if (IS_ERR(pci->dbi_base2))
-		return PTR_ERR(pci->dbi_base2);
-
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "addr_space");
-	if (!res)
-		return -EINVAL;
-
-	ep->phys_base = res->start;
-	ep->addr_size = resource_size(res);
-
-	ret = dw_pcie_ep_init(ep);
-	if (ret) {
-		dev_err(dev, "failed to initialize endpoint\n");
-		return ret;
-	}
-
-	return 0;
-}
-
 static int artpec6_pcie_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -469,10 +408,6 @@ static int artpec6_pcie_probe(struct platform_device *pdev)
 	artpec6_pcie->variant = variant;
 	artpec6_pcie->mode = mode;
 
-	pci->dbi_base = devm_platform_ioremap_resource_byname(pdev, "dbi");
-	if (IS_ERR(pci->dbi_base))
-		return PTR_ERR(pci->dbi_base);
-
 	artpec6_pcie->phy_base =
 		devm_platform_ioremap_resource_byname(pdev, "phy");
 	if (IS_ERR(artpec6_pcie->phy_base))
@@ -491,7 +426,9 @@ static int artpec6_pcie_probe(struct platform_device *pdev)
 		if (!IS_ENABLED(CONFIG_PCIE_ARTPEC6_HOST))
 			return -ENODEV;
 
-		ret = artpec6_add_pcie_port(artpec6_pcie, pdev);
+		pci->pp.ops = &artpec6_pcie_host_ops;
+
+		ret = dw_pcie_host_init(&pci->pp);
 		if (ret < 0)
 			return ret;
 		break;
@@ -504,9 +441,10 @@ static int artpec6_pcie_probe(struct platform_device *pdev)
 		val = artpec6_pcie_readl(artpec6_pcie, PCIECFG);
 		val &= ~PCIECFG_DEVICE_TYPE_MASK;
 		artpec6_pcie_writel(artpec6_pcie, PCIECFG, val);
-		ret = artpec6_add_pcie_ep(artpec6_pcie, pdev);
-		if (ret < 0)
-			return ret;
+
+		pci->ep.ops = &pcie_ep_ops;
+
+		return dw_pcie_ep_init(&pci->ep);
 		break;
 	}
 	default: