pinctrl: samsung: fix suspend/resume functionality

The GPIO states need to be restored after s2r and this is not currently
supported in the pinctrl driver. This patch saves the gpio states before
suspend and restores them after resume.

Saving and restoring is done very early using syscore_ops and must
happen before pins are released from their powerdown state.

Patch originally from Prathyush K <prathyush.k@samsung.com> but
rewritten by Doug Anderson <dianders@chromium.org>.

Signed-off-by: Prathyush K <prathyush.k@samsung.com>
Signed-off-by: Doug Anderson <dianders@chromium.org>
Tested-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 148 insertions, 0 deletions

diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c
index 055d0162098b..15db2580c145 100644
--- a/drivers/pinctrl/pinctrl-samsung.c
+++ b/drivers/pinctrl/pinctrl-samsung.c
@@ -28,6 +28,7 @@
 #include <linux/gpio.h>
 #include <linux/irqdomain.h>
 #include <linux/spinlock.h>
+#include <linux/syscore_ops.h>
 
 #include "core.h"
 #include "pinctrl-samsung.h"
@@ -48,6 +49,9 @@ static struct pin_config {
 	{ "samsung,pin-pud-pdn", PINCFG_TYPE_PUD_PDN },
 };
 
+/* Global list of devices (struct samsung_pinctrl_drv_data) */
+LIST_HEAD(drvdata_list);
+
 static unsigned int pin_base;
 
 static inline struct samsung_pin_bank *gc_to_pin_bank(struct gpio_chip *gc)
@@ -956,9 +960,145 @@ static int samsung_pinctrl_probe(struct platform_device *pdev)
 		ctrl->eint_wkup_init(drvdata);
 
 	platform_set_drvdata(pdev, drvdata);
+
+	/* Add to the global list */
+	list_add_tail(&drvdata->node, &drvdata_list);
+
 	return 0;
 }
 
+#ifdef CONFIG_PM
+
+/**
+ * samsung_pinctrl_suspend_dev - save pinctrl state for suspend for a device
+ *
+ * Save data for all banks handled by this device.
+ */
+static void samsung_pinctrl_suspend_dev(
+	struct samsung_pinctrl_drv_data *drvdata)
+{
+	struct samsung_pin_ctrl *ctrl = drvdata->ctrl;
+	void __iomem *virt_base = drvdata->virt_base;
+	int i;
+
+	for (i = 0; i < ctrl->nr_banks; i++) {
+		struct samsung_pin_bank *bank = &ctrl->pin_banks[i];
+		void __iomem *reg = virt_base + bank->pctl_offset;
+
+		u8 *offs = bank->type->reg_offset;
+		u8 *widths = bank->type->fld_width;
+		enum pincfg_type type;
+
+		/* Registers without a powerdown config aren't lost */
+		if (!widths[PINCFG_TYPE_CON_PDN])
+			continue;
+
+		for (type = 0; type < PINCFG_TYPE_NUM; type++)
+			if (widths[type])
+				bank->pm_save[type] = readl(reg + offs[type]);
+
+		if (widths[PINCFG_TYPE_FUNC] * bank->nr_pins > 32) {
+			/* Some banks have two config registers */
+			bank->pm_save[PINCFG_TYPE_NUM] =
+				readl(reg + offs[PINCFG_TYPE_FUNC] + 4);
+			pr_debug("Save %s @ %p (con %#010x %08x)\n",
+				 bank->name, reg,
+				 bank->pm_save[PINCFG_TYPE_FUNC],
+				 bank->pm_save[PINCFG_TYPE_NUM]);
+		} else {
+			pr_debug("Save %s @ %p (con %#010x)\n", bank->name,
+				 reg, bank->pm_save[PINCFG_TYPE_FUNC]);
+		}
+	}
+}
+
+/**
+ * samsung_pinctrl_resume_dev - restore pinctrl state from suspend for a device
+ *
+ * Restore one of the banks that was saved during suspend.
+ *
+ * We don't bother doing anything complicated to avoid glitching lines since
+ * we're called before pad retention is turned off.
+ */
+static void samsung_pinctrl_resume_dev(struct samsung_pinctrl_drv_data *drvdata)
+{
+	struct samsung_pin_ctrl *ctrl = drvdata->ctrl;
+	void __iomem *virt_base = drvdata->virt_base;
+	int i;
+
+	for (i = 0; i < ctrl->nr_banks; i++) {
+		struct samsung_pin_bank *bank = &ctrl->pin_banks[i];
+		void __iomem *reg = virt_base + bank->pctl_offset;
+
+		u8 *offs = bank->type->reg_offset;
+		u8 *widths = bank->type->fld_width;
+		enum pincfg_type type;
+
+		/* Registers without a powerdown config aren't lost */
+		if (!widths[PINCFG_TYPE_CON_PDN])
+			continue;
+
+		if (widths[PINCFG_TYPE_FUNC] * bank->nr_pins > 32) {
+			/* Some banks have two config registers */
+			pr_debug("%s @ %p (con %#010x %08x => %#010x %08x)\n",
+				 bank->name, reg,
+				 readl(reg + offs[PINCFG_TYPE_FUNC]),
+				 readl(reg + offs[PINCFG_TYPE_FUNC] + 4),
+				 bank->pm_save[PINCFG_TYPE_FUNC],
+				 bank->pm_save[PINCFG_TYPE_NUM]);
+			writel(bank->pm_save[PINCFG_TYPE_NUM],
+			       reg + offs[PINCFG_TYPE_FUNC] + 4);
+		} else {
+			pr_debug("%s @ %p (con %#010x => %#010x)\n", bank->name,
+				 reg, readl(reg + offs[PINCFG_TYPE_FUNC]),
+				 bank->pm_save[PINCFG_TYPE_FUNC]);
+		}
+		for (type = 0; type < PINCFG_TYPE_NUM; type++)
+			if (widths[type])
+				writel(bank->pm_save[type], reg + offs[type]);
+	}
+}
+
+/**
+ * samsung_pinctrl_suspend - save pinctrl state for suspend
+ *
+ * Save data for all banks across all devices.
+ */
+static int samsung_pinctrl_suspend(void)
+{
+	struct samsung_pinctrl_drv_data *drvdata;
+
+	list_for_each_entry(drvdata, &drvdata_list, node) {
+		samsung_pinctrl_suspend_dev(drvdata);
+	}
+
+	return 0;
+}
+
+/**
+ * samsung_pinctrl_resume - restore pinctrl state for suspend
+ *
+ * Restore data for all banks across all devices.
+ */
+static void samsung_pinctrl_resume(void)
+{
+	struct samsung_pinctrl_drv_data *drvdata;
+
+	list_for_each_entry_reverse(drvdata, &drvdata_list, node) {
+		samsung_pinctrl_resume_dev(drvdata);
+	}
+}
+
+#else
+#define samsung_pinctrl_suspend		NULL
+#define samsung_pinctrl_resume		NULL
+#endif
+
+static struct syscore_ops samsung_pinctrl_syscore_ops = {
+	.suspend	= samsung_pinctrl_suspend,
+	.resume		= samsung_pinctrl_resume,
+};
+
 static const struct of_device_id samsung_pinctrl_dt_match[] = {
 #ifdef CONFIG_PINCTRL_EXYNOS
 	{ .compatible = "samsung,exynos4210-pinctrl",
@@ -987,6 +1127,14 @@ static struct platform_driver samsung_pinctrl_driver = {
 
 static int __init samsung_pinctrl_drv_register(void)
 {
+	/*
+	 * Register syscore ops for save/restore of registers across suspend.
+	 * It's important to ensure that this driver is running at an earlier
+	 * initcall level than any arch-specific init calls that install syscore
+	 * ops that turn off pad retention (like exynos_pm_resume).
+	 */
+	register_syscore_ops(&samsung_pinctrl_syscore_ops);
+
 	return platform_driver_register(&samsung_pinctrl_driver);
 }
 postcore_initcall(samsung_pinctrl_drv_register);