[PATCH] sata_nv: better irq handlers

nf2/3 and ck804 have irq status register.  Implement better irq
handler for those flavors of nv.  This patch makes different flavors
of nv controllers use different irq handlers by using separate
port_info for each flavor.

This change also makes following EH and hotplug updates easier to
integrate.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 194 insertions, 17 deletions

diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c
index 1cb7b44cb660..94cb17903fae 100644
--- a/drivers/scsi/sata_nv.c
+++ b/drivers/scsi/sata_nv.c
@@ -78,8 +78,13 @@ enum {
 };
 
 static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
-static irqreturn_t nv_interrupt (int irq, void *dev_instance,
-				 struct pt_regs *regs);
+static void nv_ck804_host_stop(struct ata_host_set *host_set);
+static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance,
+					struct pt_regs *regs);
+static irqreturn_t nv_nf2_interrupt(int irq, void *dev_instance,
+				    struct pt_regs *regs);
+static irqreturn_t nv_ck804_interrupt(int irq, void *dev_instance,
+				      struct pt_regs *regs);
 static u32 nv_scr_read (struct ata_port *ap, unsigned int sc_reg);
 static void nv_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
 
@@ -154,7 +159,7 @@ static struct scsi_host_template nv_sht = {
 	.bios_param		= ata_std_bios_param,
 };
 
-static const struct ata_port_operations nv_ops = {
+static const struct ata_port_operations nv_generic_ops = {
 	.port_disable		= ata_port_disable,
 	.tf_load		= ata_tf_load,
 	.tf_read		= ata_tf_read,
@@ -170,7 +175,7 @@ static const struct ata_port_operations nv_ops = {
 	.qc_issue		= ata_qc_issue_prot,
 	.eng_timeout		= ata_eng_timeout,
 	.data_xfer		= ata_pio_data_xfer,
-	.irq_handler		= nv_interrupt,
+	.irq_handler		= nv_generic_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.scr_read		= nv_scr_read,
 	.scr_write		= nv_scr_write,
@@ -179,6 +184,56 @@ static const struct ata_port_operations nv_ops = {
 	.host_stop		= ata_pci_host_stop,
 };
 
+static const struct ata_port_operations nv_nf2_ops = {
+	.port_disable		= ata_port_disable,
+	.tf_load		= ata_tf_load,
+	.tf_read		= ata_tf_read,
+	.exec_command		= ata_exec_command,
+	.check_status		= ata_check_status,
+	.dev_select		= ata_std_dev_select,
+	.phy_reset		= sata_phy_reset,
+	.bmdma_setup		= ata_bmdma_setup,
+	.bmdma_start		= ata_bmdma_start,
+	.bmdma_stop		= ata_bmdma_stop,
+	.bmdma_status		= ata_bmdma_status,
+	.qc_prep		= ata_qc_prep,
+	.qc_issue		= ata_qc_issue_prot,
+	.eng_timeout		= ata_eng_timeout,
+	.data_xfer		= ata_pio_data_xfer,
+	.irq_handler		= nv_nf2_interrupt,
+	.irq_clear		= ata_bmdma_irq_clear,
+	.scr_read		= nv_scr_read,
+	.scr_write		= nv_scr_write,
+	.port_start		= ata_port_start,
+	.port_stop		= ata_port_stop,
+	.host_stop		= ata_pci_host_stop,
+};
+
+static const struct ata_port_operations nv_ck804_ops = {
+	.port_disable		= ata_port_disable,
+	.tf_load		= ata_tf_load,
+	.tf_read		= ata_tf_read,
+	.exec_command		= ata_exec_command,
+	.check_status		= ata_check_status,
+	.dev_select		= ata_std_dev_select,
+	.phy_reset		= sata_phy_reset,
+	.bmdma_setup		= ata_bmdma_setup,
+	.bmdma_start		= ata_bmdma_start,
+	.bmdma_stop		= ata_bmdma_stop,
+	.bmdma_status		= ata_bmdma_status,
+	.qc_prep		= ata_qc_prep,
+	.qc_issue		= ata_qc_issue_prot,
+	.eng_timeout		= ata_eng_timeout,
+	.data_xfer		= ata_pio_data_xfer,
+	.irq_handler		= nv_ck804_interrupt,
+	.irq_clear		= ata_bmdma_irq_clear,
+	.scr_read		= nv_scr_read,
+	.scr_write		= nv_scr_write,
+	.port_start		= ata_port_start,
+	.port_stop		= ata_port_stop,
+	.host_stop		= nv_ck804_host_stop,
+};
+
 /* FIXME: The hardware provides the necessary SATA PHY controls
  * to support ATA_FLAG_SATA_RESET.  However, it is currently
  * necessary to disable that flag, to solve misdetection problems.
@@ -187,16 +242,43 @@ static const struct ata_port_operations nv_ops = {
  * This problem really needs to be investigated further.  But in the
  * meantime, we avoid ATA_FLAG_SATA_RESET to get people working.
  */
-static struct ata_port_info nv_port_info = {
-	.sht		= &nv_sht,
-	.host_flags	= ATA_FLAG_SATA |
-			  /* ATA_FLAG_SATA_RESET | */
-			  ATA_FLAG_SRST |
-			  ATA_FLAG_NO_LEGACY,
-	.pio_mask	= NV_PIO_MASK,
-	.mwdma_mask	= NV_MWDMA_MASK,
-	.udma_mask	= NV_UDMA_MASK,
-	.port_ops	= &nv_ops,
+static struct ata_port_info nv_port_info[] = {
+	/* generic */
+	{
+		.sht		= &nv_sht,
+		.host_flags	= ATA_FLAG_SATA |
+				  /* ATA_FLAG_SATA_RESET | */
+				  ATA_FLAG_SRST |
+				  ATA_FLAG_NO_LEGACY,
+		.pio_mask	= NV_PIO_MASK,
+		.mwdma_mask	= NV_MWDMA_MASK,
+		.udma_mask	= NV_UDMA_MASK,
+		.port_ops	= &nv_generic_ops,
+	},
+	/* nforce2/3 */
+	{
+		.sht		= &nv_sht,
+		.host_flags	= ATA_FLAG_SATA |
+				  /* ATA_FLAG_SATA_RESET | */
+				  ATA_FLAG_SRST |
+				  ATA_FLAG_NO_LEGACY,
+		.pio_mask	= NV_PIO_MASK,
+		.mwdma_mask	= NV_MWDMA_MASK,
+		.udma_mask	= NV_UDMA_MASK,
+		.port_ops	= &nv_nf2_ops,
+	},
+	/* ck804 */
+	{
+		.sht		= &nv_sht,
+		.host_flags	= ATA_FLAG_SATA |
+				  /* ATA_FLAG_SATA_RESET | */
+				  ATA_FLAG_SRST |
+				  ATA_FLAG_NO_LEGACY,
+		.pio_mask	= NV_PIO_MASK,
+		.mwdma_mask	= NV_MWDMA_MASK,
+		.udma_mask	= NV_UDMA_MASK,
+		.port_ops	= &nv_ck804_ops,
+	},
 };
 
 MODULE_AUTHOR("NVIDIA");
@@ -205,8 +287,8 @@ MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, nv_pci_tbl);
 MODULE_VERSION(DRV_VERSION);
 
-static irqreturn_t nv_interrupt (int irq, void *dev_instance,
-				 struct pt_regs *regs)
+static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance,
+					struct pt_regs *regs)
 {
 	struct ata_host_set *host_set = dev_instance;
 	unsigned int i;
@@ -239,6 +321,79 @@ static irqreturn_t nv_interrupt (int irq, void *dev_instance,
 	return IRQ_RETVAL(handled);
 }
 
+static int nv_host_intr(struct ata_port *ap, u8 irq_stat)
+{
+	struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag);
+	int handled;
+
+	/* bail out if not our interrupt */
+	if (!(irq_stat & NV_INT_DEV))
+		return 0;
+
+	/* DEV interrupt w/ no active qc? */
+	if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) {
+		ata_check_status(ap);
+		return 1;
+	}
+
+	/* handle interrupt */
+	handled = ata_host_intr(ap, qc);
+	if (unlikely(!handled)) {
+		/* spurious, clear it */
+		ata_check_status(ap);
+	}
+
+	return 1;
+}
+
+static irqreturn_t nv_do_interrupt(struct ata_host_set *host_set, u8 irq_stat)
+{
+	int i, handled = 0;
+
+	for (i = 0; i < host_set->n_ports; i++) {
+		struct ata_port *ap = host_set->ports[i];
+
+		if (ap && !(ap->flags & ATA_FLAG_DISABLED))
+			handled += nv_host_intr(ap, irq_stat);
+
+		irq_stat >>= NV_INT_PORT_SHIFT;
+	}
+
+	return IRQ_RETVAL(handled);
+}
+
+static irqreturn_t nv_nf2_interrupt(int irq, void *dev_instance,
+				    struct pt_regs *regs)
+{
+	struct ata_host_set *host_set = dev_instance;
+	unsigned long flags;
+	u8 irq_stat;
+	irqreturn_t ret;
+
+	spin_lock_irqsave(&host_set->lock, flags);
+	irq_stat = inb(host_set->ports[0]->ioaddr.scr_addr + NV_INT_STATUS);
+	ret = nv_do_interrupt(host_set, irq_stat);
+	spin_unlock_irqrestore(&host_set->lock, flags);
+
+	return ret;
+}
+
+static irqreturn_t nv_ck804_interrupt(int irq, void *dev_instance,
+				      struct pt_regs *regs)
+{
+	struct ata_host_set *host_set = dev_instance;
+	unsigned long flags;
+	u8 irq_stat;
+	irqreturn_t ret;
+
+	spin_lock_irqsave(&host_set->lock, flags);
+	irq_stat = readb(host_set->mmio_base + NV_INT_STATUS_CK804);
+	ret = nv_do_interrupt(host_set, irq_stat);
+	spin_unlock_irqrestore(&host_set->lock, flags);
+
+	return ret;
+}
+
 static u32 nv_scr_read (struct ata_port *ap, unsigned int sc_reg)
 {
 	if (sc_reg > SCR_CONTROL)
@@ -294,7 +449,7 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	rc = -ENOMEM;
 
-	ppi = &nv_port_info;
+	ppi = &nv_port_info[ent->driver_data];
 	probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
 	if (!probe_ent)
 		goto err_out_regions;
@@ -310,6 +465,15 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	probe_ent->port[0].scr_addr = base + NV_PORT0_SCR_REG_OFFSET;
 	probe_ent->port[1].scr_addr = base + NV_PORT1_SCR_REG_OFFSET;
 
+	/* enable SATA space for CK804 */
+	if (ent->driver_data == CK804) {
+		u8 regval;
+
+		pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, &regval);
+		regval |= NV_MCP_SATA_CFG_20_SATA_SPACE_EN;
+		pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval);
+	}
+
 	pci_set_master(pdev);
 
 	rc = ata_device_add(probe_ent);
@@ -333,6 +497,19 @@ err_out:
 	return rc;
 }
 
+static void nv_ck804_host_stop(struct ata_host_set *host_set)
+{
+	struct pci_dev *pdev = to_pci_dev(host_set->dev);
+	u8 regval;
+
+	/* disable SATA space for CK804 */
+	pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, &regval);
+	regval &= ~NV_MCP_SATA_CFG_20_SATA_SPACE_EN;
+	pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval);
+
+	ata_pci_host_stop(host_set);
+}
+
 static int __init nv_init(void)
 {
 	return pci_module_init(&nv_pci_driver);