Merge tag 'timers-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timekeeping and timer updates from Thomas Gleixner:
 "Core:

   - Consolidation of the vDSO build infrastructure to address the
     difficulties of cross-builds for ARM64 compat vDSO libraries by
     restricting the exposure of header content to the vDSO build.

     This is achieved by splitting out header content into separate
     headers. which contain only the minimaly required information which
     is necessary to build the vDSO. These new headers are included from
     the kernel headers and the vDSO specific files.

   - Enhancements to the generic vDSO library allowing more fine grained
     control over the compiled in code, further reducing architecture
     specific storage and preparing for adopting the generic library by
     PPC.

   - Cleanup and consolidation of the exit related code in posix CPU
     timers.

   - Small cleanups and enhancements here and there

  Drivers:

   - The obligatory new drivers: Ingenic JZ47xx and X1000 TCU support

   - Correct the clock rate of PIT64b global clock

   - setup_irq() cleanup

   - Preparation for PWM and suspend support for the TI DM timer

   - Expand the fttmr010 driver to support ast2600 systems

   - The usual small fixes, enhancements and cleanups all over the
     place"

* tag 'timers-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (80 commits)
  Revert "clocksource/drivers/timer-probe: Avoid creating dead devices"
  vdso: Fix clocksource.h macro detection
  um: Fix header inclusion
  arm64: vdso32: Enable Clang Compilation
  lib/vdso: Enable common headers
  arm: vdso: Enable arm to use common headers
  x86/vdso: Enable x86 to use common headers
  mips: vdso: Enable mips to use common headers
  arm64: vdso32: Include common headers in the vdso library
  arm64: vdso: Include common headers in the vdso library
  arm64: Introduce asm/vdso/processor.h
  arm64: vdso32: Code clean up
  linux/elfnote.h: Replace elf.h with UAPI equivalent
  scripts: Fix the inclusion order in modpost
  common: Introduce processor.h
  linux/ktime.h: Extract common header for vDSO
  linux/jiffies.h: Extract common header for vDSO
  linux/time64.h: Extract common header for vDSO
  linux/time32.h: Extract common header for vDSO
  linux/time.h: Extract common header for vDSO
  ...

1 files changed, 52 insertions, 41 deletions

diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
index b21db536fd52..86d143db6523 100644
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@@ -23,18 +23,31 @@
 struct clocksource;
 struct module;
 
-#ifdef CONFIG_ARCH_CLOCKSOURCE_DATA
+#if defined(CONFIG_ARCH_CLOCKSOURCE_DATA) || \
+    defined(CONFIG_GENERIC_GETTIMEOFDAY)
 #include <asm/clocksource.h>
 #endif
 
+#include <vdso/clocksource.h>
+
 /**
  * struct clocksource - hardware abstraction for a free running counter
  *	Provides mostly state-free accessors to the underlying hardware.
  *	This is the structure used for system time.
  *
- * @name:		ptr to clocksource name
- * @list:		list head for registration
- * @rating:		rating value for selection (higher is better)
+ * @read:		Returns a cycle value, passes clocksource as argument
+ * @mask:		Bitmask for two's complement
+ *			subtraction of non 64 bit counters
+ * @mult:		Cycle to nanosecond multiplier
+ * @shift:		Cycle to nanosecond divisor (power of two)
+ * @max_idle_ns:	Maximum idle time permitted by the clocksource (nsecs)
+ * @maxadj:		Maximum adjustment value to mult (~11%)
+ * @archdata:		Optional arch-specific data
+ * @max_cycles:		Maximum safe cycle value which won't overflow on
+ *			multiplication
+ * @name:		Pointer to clocksource name
+ * @list:		List head for registration (internal)
+ * @rating:		Rating value for selection (higher is better)
  *			To avoid rating inflation the following
  *			list should give you a guide as to how
  *			to assign your clocksource a rating
@@ -49,27 +62,23 @@ struct module;
  *			400-499: Perfect
  *				The ideal clocksource. A must-use where
  *				available.
- * @read:		returns a cycle value, passes clocksource as argument
- * @enable:		optional function to enable the clocksource
- * @disable:		optional function to disable the clocksource
- * @mask:		bitmask for two's complement
- *			subtraction of non 64 bit counters
- * @mult:		cycle to nanosecond multiplier
- * @shift:		cycle to nanosecond divisor (power of two)
- * @max_idle_ns:	max idle time permitted by the clocksource (nsecs)
- * @maxadj:		maximum adjustment value to mult (~11%)
- * @max_cycles:		maximum safe cycle value which won't overflow on multiplication
- * @flags:		flags describing special properties
- * @archdata:		arch-specific data
- * @suspend:		suspend function for the clocksource, if necessary
- * @resume:		resume function for the clocksource, if necessary
+ * @flags:		Flags describing special properties
+ * @enable:		Optional function to enable the clocksource
+ * @disable:		Optional function to disable the clocksource
+ * @suspend:		Optional suspend function for the clocksource
+ * @resume:		Optional resume function for the clocksource
  * @mark_unstable:	Optional function to inform the clocksource driver that
  *			the watchdog marked the clocksource unstable
- * @owner:		module reference, must be set by clocksource in modules
+ * @tick_stable:        Optional function called periodically from the watchdog
+ *			code to provide stable syncrhonization points
+ * @wd_list:		List head to enqueue into the watchdog list (internal)
+ * @cs_last:		Last clocksource value for clocksource watchdog
+ * @wd_last:		Last watchdog value corresponding to @cs_last
+ * @owner:		Module reference, must be set by clocksource in modules
  *
  * Note: This struct is not used in hotpathes of the timekeeping code
  * because the timekeeper caches the hot path fields in its own data
- * structure, so no line cache alignment is required,
+ * structure, so no cache line alignment is required,
  *
  * The pointer to the clocksource itself is handed to the read
  * callback. If you need extra information there you can wrap struct
@@ -78,35 +87,37 @@ struct module;
  * structure.
  */
 struct clocksource {
-	u64 (*read)(struct clocksource *cs);
-	u64 mask;
-	u32 mult;
-	u32 shift;
-	u64 max_idle_ns;
-	u32 maxadj;
+	u64			(*read)(struct clocksource *cs);
+	u64			mask;
+	u32			mult;
+	u32			shift;
+	u64			max_idle_ns;
+	u32			maxadj;
 #ifdef CONFIG_ARCH_CLOCKSOURCE_DATA
 	struct arch_clocksource_data archdata;
 #endif
-	u64 max_cycles;
-	const char *name;
-	struct list_head list;
-	int rating;
-	int (*enable)(struct clocksource *cs);
-	void (*disable)(struct clocksource *cs);
-	unsigned long flags;
-	void (*suspend)(struct clocksource *cs);
-	void (*resume)(struct clocksource *cs);
-	void (*mark_unstable)(struct clocksource *cs);
-	void (*tick_stable)(struct clocksource *cs);
+	u64			max_cycles;
+	const char		*name;
+	struct list_head	list;
+	int			rating;
+	enum vdso_clock_mode	vdso_clock_mode;
+	unsigned long		flags;
+
+	int			(*enable)(struct clocksource *cs);
+	void			(*disable)(struct clocksource *cs);
+	void			(*suspend)(struct clocksource *cs);
+	void			(*resume)(struct clocksource *cs);
+	void			(*mark_unstable)(struct clocksource *cs);
+	void			(*tick_stable)(struct clocksource *cs);
 
 	/* private: */
 #ifdef CONFIG_CLOCKSOURCE_WATCHDOG
 	/* Watchdog related data, used by the framework */
-	struct list_head wd_list;
-	u64 cs_last;
-	u64 wd_last;
+	struct list_head	wd_list;
+	u64			cs_last;
+	u64			wd_last;
 #endif
-	struct module *owner;
+	struct module		*owner;
 };
 
 /*