Merge drm/drm-next into drm-misc-next

Backmerging required to pull topic/phy-compliance.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

1 files changed, 61 insertions, 1 deletions

diff --git a/include/linux/phy.h b/include/linux/phy.h
index c570e162e05e..2432ca463ddc 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -23,6 +23,8 @@
 #include <linux/workqueue.h>
 #include <linux/mod_devicetable.h>
 #include <linux/u64_stats_sync.h>
+#include <linux/irqreturn.h>
+#include <linux/iopoll.h>
 
 #include <linux/atomic.h>
 
@@ -94,6 +96,7 @@ typedef enum {
 	PHY_INTERFACE_MODE_RTBI,
 	PHY_INTERFACE_MODE_SMII,
 	PHY_INTERFACE_MODE_XGMII,
+	PHY_INTERFACE_MODE_XLGMII,
 	PHY_INTERFACE_MODE_MOCA,
 	PHY_INTERFACE_MODE_QSGMII,
 	PHY_INTERFACE_MODE_TRGMII,
@@ -165,6 +168,8 @@ static inline const char *phy_modes(phy_interface_t interface)
 		return "smii";
 	case PHY_INTERFACE_MODE_XGMII:
 		return "xgmii";
+	case PHY_INTERFACE_MODE_XLGMII:
+		return "xlgmii";
 	case PHY_INTERFACE_MODE_MOCA:
 		return "moca";
 	case PHY_INTERFACE_MODE_QSGMII:
@@ -289,6 +294,7 @@ static inline struct mii_bus *devm_mdiobus_alloc(struct device *dev)
 	return devm_mdiobus_alloc_size(dev, 0);
 }
 
+struct mii_bus *mdio_find_bus(const char *mdio_name);
 void devm_mdiobus_free(struct device *dev, struct mii_bus *bus);
 struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr);
 
@@ -357,8 +363,10 @@ struct macsec_ops;
  * is_gigabit_capable: Set to true if PHY supports 1000Mbps
  * has_fixups: Set to true if this phy has fixups/quirks.
  * suspended: Set to true if this phy has been suspended successfully.
+ * suspended_by_mdio_bus: Set to true if this phy was suspended by MDIO bus.
  * sysfs_links: Internal boolean tracking sysfs symbolic links setup/removal.
  * loopback_enabled: Set true if this phy has been loopbacked successfully.
+ * downshifted_rate: Set true if link speed has been downshifted.
  * state: state of the PHY for management purposes
  * dev_flags: Device-specific flags used by the PHY driver.
  * irq: IRQ number of the PHY's interrupt (-1 if none)
@@ -396,8 +404,10 @@ struct phy_device {
 	unsigned is_gigabit_capable:1;
 	unsigned has_fixups:1;
 	unsigned suspended:1;
+	unsigned suspended_by_mdio_bus:1;
 	unsigned sysfs_links:1;
 	unsigned loopback_enabled:1;
+	unsigned downshifted_rate:1;
 
 	unsigned autoneg:1;
 	/* The most recently read link state */
@@ -557,11 +567,12 @@ struct phy_driver {
 	/*
 	 * Checks if the PHY generated an interrupt.
 	 * For multi-PHY devices with shared PHY interrupt pin
+	 * Set interrupt bits have to be cleared.
 	 */
 	int (*did_interrupt)(struct phy_device *phydev);
 
 	/* Override default interrupt handling */
-	int (*handle_interrupt)(struct phy_device *phydev);
+	irqreturn_t (*handle_interrupt)(struct phy_device *phydev);
 
 	/* Clears up any memory if needed */
 	void (*remove)(struct phy_device *phydev);
@@ -690,6 +701,7 @@ static inline bool phy_is_started(struct phy_device *phydev)
 
 void phy_resolve_aneg_pause(struct phy_device *phydev);
 void phy_resolve_aneg_linkmode(struct phy_device *phydev);
+void phy_check_downshift(struct phy_device *phydev);
 
 /**
  * phy_read - Convenience function for reading a given PHY register
@@ -705,6 +717,19 @@ static inline int phy_read(struct phy_device *phydev, u32 regnum)
 	return mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, regnum);
 }
 
+#define phy_read_poll_timeout(phydev, regnum, val, cond, sleep_us, \
+				timeout_us, sleep_before_read) \
+({ \
+	int __ret = read_poll_timeout(phy_read, val, (cond) || val < 0, \
+		sleep_us, timeout_us, sleep_before_read, phydev, regnum); \
+	if (val <  0) \
+		__ret = val; \
+	if (__ret) \
+		phydev_err(phydev, "%s failed: %d\n", __func__, __ret); \
+	__ret; \
+})
+
+
 /**
  * __phy_read - convenience function for reading a given PHY register
  * @phydev: the phy_device struct
@@ -747,6 +772,25 @@ static inline int __phy_write(struct phy_device *phydev, u32 regnum, u16 val)
 }
 
 /**
+ * __phy_modify_changed() - Convenience function for modifying a PHY register
+ * @phydev: a pointer to a &struct phy_device
+ * @regnum: register number
+ * @mask: bit mask of bits to clear
+ * @set: bit mask of bits to set
+ *
+ * Unlocked helper function which allows a PHY register to be modified as
+ * new register value = (old register value & ~mask) | set
+ *
+ * Returns negative errno, 0 if there was no change, and 1 in case of change
+ */
+static inline int __phy_modify_changed(struct phy_device *phydev, u32 regnum,
+				       u16 mask, u16 set)
+{
+	return __mdiobus_modify_changed(phydev->mdio.bus, phydev->mdio.addr,
+					regnum, mask, set);
+}
+
+/**
  * phy_read_mmd - Convenience function for reading a register
  * from an MMD on a given PHY.
  * @phydev: The phy_device struct
@@ -757,6 +801,19 @@ static inline int __phy_write(struct phy_device *phydev, u32 regnum, u16 val)
  */
 int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum);
 
+#define phy_read_mmd_poll_timeout(phydev, devaddr, regnum, val, cond, \
+				  sleep_us, timeout_us, sleep_before_read) \
+({ \
+	int __ret = read_poll_timeout(phy_read_mmd, val, (cond) || val < 0, \
+				  sleep_us, timeout_us, sleep_before_read, \
+				  phydev, devaddr, regnum); \
+	if (val <  0) \
+		__ret = val; \
+	if (__ret) \
+		phydev_err(phydev, "%s failed: %d\n", __func__, __ret); \
+	__ret; \
+})
+
 /**
  * __phy_read_mmd - Convenience function for reading a register
  * from an MMD on a given PHY.
@@ -1257,6 +1314,9 @@ void phy_set_sym_pause(struct phy_device *phydev, bool rx, bool tx,
 void phy_set_asym_pause(struct phy_device *phydev, bool rx, bool tx);
 bool phy_validate_pause(struct phy_device *phydev,
 			struct ethtool_pauseparam *pp);
+void phy_get_pause(struct phy_device *phydev, bool *tx_pause, bool *rx_pause);
+void phy_resolve_pause(unsigned long *local_adv, unsigned long *partner_adv,
+		       bool *tx_pause, bool *rx_pause);
 
 int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask,
 		       int (*run)(struct phy_device *));