Merge tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/Thunderbolt/PHY driver updates from Greg KH:
 "Here is the big USB and Thunderbolt and PHY driver updates for
  5.6-rc1.

  With the advent of USB4, "Thunderbolt" has really become USB4, so the
  renaming of the Kconfig option and starting to share subsystem code
  has begun, hence both subsystems coming in through the same tree here.

  PHY driver updates also touched USB drivers, so that is coming in
  through here as well.

  Major stuff included in here are:
   - USB 4 initial support added (i.e. Thunderbolt)
   - musb driver updates
   - USB gadget driver updates
   - PHY driver updates
   - USB PHY driver updates
   - lots of USB serial stuff fixed up
   - USB typec updates
   - USB-IP fixes
   - lots of other smaller USB driver updates

  All of these have been in linux-next for a while now (the usb-serial
  tree is already tested in linux-next on its own before merged into
  here), with no reported issues"

[ Removed an incorrect compile test enablement for PHY_EXYNOS5250_SATA
  that causes configuration warnings    - Linus ]

* tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (207 commits)
  Doc: ABI: add usb charger uevent
  usb: phy: show USB charger type for user
  usb: cdns3: fix spelling mistake and rework grammar in text
  usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptors
  USB: serial: cyberjack: fix spelling mistake "To" -> "Too"
  USB: serial: ir-usb: simplify endpoint check
  USB: serial: ir-usb: make set_termios synchronous
  USB: serial: ir-usb: fix IrLAP framing
  USB: serial: ir-usb: fix link-speed handling
  USB: serial: ir-usb: add missing endpoint sanity check
  usb: typec: fusb302: fix "op-sink-microwatt" default that was in mW
  usb: typec: wcove: fix "op-sink-microwatt" default that was in mW
  usb: dwc3: pci: add ID for the Intel Comet Lake -V variant
  usb: typec: tcpci: mask event interrupts when remove driver
  usb: host: xhci-tegra: set MODULE_FIRMWARE for tegra186
  usb: chipidea: add inline for ci_hdrc_host_driver_init if host is not defined
  usb: chipidea: handle single role for usb role class
  usb: musb: fix spelling mistake: "periperal" -> "peripheral"
  phy: ti: j721e-wiz: Fix build error without CONFIG_OF_ADDRESS
  USB: usbfs: Always unlink URBs in reverse order
  ...

11 files changed, 126 insertions, 53 deletions

diff --git a/include/linux/usb/gpio_vbus.h b/include/linux/usb/gpio_vbus.h
deleted file mode 100644
index 804fb06cf6d6..000000000000
--- a/include/linux/usb/gpio_vbus.h
+++ /dev/null
@@ -1,33 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * A simple GPIO VBUS sensing driver for B peripheral only devices
- * with internal transceivers.
- * Optionally D+ pullup can be controlled by a second GPIO.
- *
- * Copyright (c) 2008 Philipp Zabel <philipp.zabel@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-/**
- * struct gpio_vbus_mach_info - configuration for gpio_vbus
- * @gpio_vbus: VBUS sensing GPIO
- * @gpio_pullup: optional D+ or D- pullup GPIO (else negative/invalid)
- * @gpio_vbus_inverted: true if gpio_vbus is active low
- * @gpio_pullup_inverted: true if gpio_pullup is active low
- * @wakeup: configure gpio_vbus as a wake-up source
- *
- * The VBUS sensing GPIO should have a pulldown, which will normally be
- * part of a resistor ladder turning a 4.0V-5.25V level on VBUS into a
- * value the GPIO detects as active.  Some systems will use comparators.
- */
-struct gpio_vbus_mach_info {
-	int gpio_vbus;
-	int gpio_pullup;
-	bool gpio_vbus_inverted;
-	bool gpio_pullup_inverted;
-	bool wakeup;
-};
diff --git a/include/linux/usb/irda.h b/include/linux/usb/irda.h
index 396d2b043e64..556a801efce3 100644
--- a/include/linux/usb/irda.h
+++ b/include/linux/usb/irda.h
@@ -119,11 +119,22 @@ struct usb_irda_cs_descriptor {
  * 6 - 115200 bps
  * 7 - 576000 bps
  * 8 - 1.152 Mbps
- * 9 - 5 mbps
+ * 9 - 4 Mbps
  * 10..15 - Reserved
  */
 #define USB_IRDA_STATUS_LINK_SPEED	0x0f
 
+#define USB_IRDA_LS_NO_CHANGE		0
+#define USB_IRDA_LS_2400		1
+#define USB_IRDA_LS_9600		2
+#define USB_IRDA_LS_19200		3
+#define USB_IRDA_LS_38400		4
+#define USB_IRDA_LS_57600		5
+#define USB_IRDA_LS_115200		6
+#define USB_IRDA_LS_576000		7
+#define USB_IRDA_LS_1152000		8
+#define USB_IRDA_LS_4000000		9
+
 /* The following is a 4-bit value used only for
  * outbound header:
  *
diff --git a/include/linux/usb/pd.h b/include/linux/usb/pd.h
index 145c38e351c2..a665d7f21142 100644
--- a/include/linux/usb/pd.h
+++ b/include/linux/usb/pd.h
@@ -45,7 +45,8 @@ enum pd_data_msg_type {
 	PD_DATA_BATT_STATUS = 5,
 	PD_DATA_ALERT = 6,
 	PD_DATA_GET_COUNTRY_INFO = 7,
-	/* 8-14 Reserved */
+	PD_DATA_ENTER_USB = 8,
+	/* 9-14 Reserved */
 	PD_DATA_VENDOR_DEF = 15,
 	/* 16-31 Reserved */
 };
@@ -418,6 +419,36 @@ static inline unsigned int rdo_max_power(u32 rdo)
 	return ((rdo >> RDO_BATT_MAX_PWR_SHIFT) & RDO_PWR_MASK) * 250;
 }
 
+/* Enter_USB Data Object */
+#define EUDO_USB_MODE_MASK		GENMASK(30, 28)
+#define EUDO_USB_MODE_SHIFT		28
+#define   EUDO_USB_MODE_USB2		0
+#define   EUDO_USB_MODE_USB3		1
+#define   EUDO_USB_MODE_USB4		2
+#define EUDO_USB4_DRD			BIT(26)
+#define EUDO_USB3_DRD			BIT(25)
+#define EUDO_CABLE_SPEED_MASK		GENMASK(23, 21)
+#define EUDO_CABLE_SPEED_SHIFT		21
+#define   EUDO_CABLE_SPEED_USB2		0
+#define   EUDO_CABLE_SPEED_USB3_GEN1	1
+#define   EUDO_CABLE_SPEED_USB4_GEN2	2
+#define   EUDO_CABLE_SPEED_USB4_GEN3	3
+#define EUDO_CABLE_TYPE_MASK		GENMASK(20, 19)
+#define EUDO_CABLE_TYPE_SHIFT		19
+#define   EUDO_CABLE_TYPE_PASSIVE	0
+#define   EUDO_CABLE_TYPE_RE_TIMER	1
+#define   EUDO_CABLE_TYPE_RE_DRIVER	2
+#define   EUDO_CABLE_TYPE_OPTICAL	3
+#define EUDO_CABLE_CURRENT_MASK		GENMASK(18, 17)
+#define EUDO_CABLE_CURRENT_SHIFT	17
+#define   EUDO_CABLE_CURRENT_NOTSUPP	0
+#define   EUDO_CABLE_CURRENT_3A		2
+#define   EUDO_CABLE_CURRENT_5A		3
+#define EUDO_PCIE_SUPPORT		BIT(16)
+#define EUDO_DP_SUPPORT			BIT(15)
+#define EUDO_TBT_SUPPORT		BIT(14)
+#define EUDO_HOST_PRESENT		BIT(13)
+
 /* USB PD timers and counters */
 #define PD_T_NO_RESPONSE	5000	/* 4.5 - 5.5 seconds */
 #define PD_T_DB_DETECT		10000	/* 10 - 15 seconds */
diff --git a/include/linux/usb/pd_vdo.h b/include/linux/usb/pd_vdo.h
index 781f4e98dd23..35b8e15efaa0 100644
--- a/include/linux/usb/pd_vdo.h
+++ b/include/linux/usb/pd_vdo.h
@@ -140,6 +140,38 @@
 #define PD_PRODUCT_PID(vdo)	(((vdo) >> 16) & 0xffff)
 
 /*
+ * UFP VDO1
+ * --------
+ * <31:29> :: UFP VDO version
+ * <28>    :: Reserved
+ * <27:24> :: Device capability
+ * <23:6>  :: Reserved
+ * <5:3>   :: Alternate modes
+ * <2:0>   :: USB highest speed
+ */
+#define PD_VDO1_UFP_DEVCAP(vdo)	(((vdo) & GENMASK(27, 24)) >> 24)
+
+#define DEV_USB2_CAPABLE	BIT(0)
+#define DEV_USB2_BILLBOARD	BIT(1)
+#define DEV_USB3_CAPABLE	BIT(2)
+#define DEV_USB4_CAPABLE	BIT(3)
+
+/*
+ * DFP VDO
+ * --------
+ * <31:29> :: DFP VDO version
+ * <28:27> :: Reserved
+ * <26:24> :: Host capability
+ * <23:5>  :: Reserved
+ * <4:0>   :: Port number
+ */
+#define PD_VDO_DFP_HOSTCAP(vdo)	(((vdo) & GENMASK(26, 24)) >> 24)
+
+#define HOST_USB2_CAPABLE	BIT(0)
+#define HOST_USB3_CAPABLE	BIT(1)
+#define HOST_USB4_CAPABLE	BIT(2)
+
+/*
  * Cable VDO
  * ---------
  * <31:28> :: Cable HW version
diff --git a/include/linux/usb/renesas_usbhs.h b/include/linux/usb/renesas_usbhs.h
index 6914475bbc86..d418c55523a7 100644
--- a/include/linux/usb/renesas_usbhs.h
+++ b/include/linux/usb/renesas_usbhs.h
@@ -170,8 +170,6 @@ struct renesas_usbhs_driver_param {
 	 */
 	int pio_dma_border; /* default is 64byte */
 
-	u32 enable_gpio;
-
 	/*
 	 * option:
 	 */
diff --git a/include/linux/usb/tegra_usb_phy.h b/include/linux/usb/tegra_usb_phy.h
index 0c5c3ea8b2d7..c29d1b4c9381 100644
--- a/include/linux/usb/tegra_usb_phy.h
+++ b/include/linux/usb/tegra_usb_phy.h
@@ -17,6 +17,7 @@
 #define __TEGRA_USB_PHY_H
 
 #include <linux/clk.h>
+#include <linux/gpio.h>
 #include <linux/reset.h>
 #include <linux/usb/otg.h>
 
@@ -76,8 +77,9 @@ struct tegra_usb_phy {
 	struct usb_phy u_phy;
 	bool is_legacy_phy;
 	bool is_ulpi_phy;
-	int reset_gpio;
+	struct gpio_desc *reset_gpio;
 	struct reset_control *pad_rst;
+	bool powered_on;
 };
 
 void tegra_usb_phy_preresume(struct usb_phy *phy);
diff --git a/include/linux/usb/typec.h b/include/linux/usb/typec.h
index 0f52723a11bd..c358b3fd05c9 100644
--- a/include/linux/usb/typec.h
+++ b/include/linux/usb/typec.h
@@ -9,6 +9,9 @@
 #define USB_TYPEC_REV_1_0	0x100 /* 1.0 */
 #define USB_TYPEC_REV_1_1	0x110 /* 1.1 */
 #define USB_TYPEC_REV_1_2	0x120 /* 1.2 */
+#define USB_TYPEC_REV_1_3	0x130 /* 1.3 */
+#define USB_TYPEC_REV_1_4	0x140 /* 1.4 */
+#define USB_TYPEC_REV_2_0	0x200 /* 2.0 */
 
 struct typec_partner;
 struct typec_cable;
@@ -74,6 +77,7 @@ enum typec_orientation {
  * @id_header: ID Header VDO
  * @cert_stat: Cert Stat VDO
  * @product: Product VDO
+ * @vdo: Product Type Specific VDOs
  *
  * USB power delivery Discover Identity command response data.
  *
@@ -84,6 +88,7 @@ struct usb_pd_identity {
 	u32			id_header;
 	u32			cert_stat;
 	u32			product;
+	u32			vdo[3];
 };
 
 int typec_partner_set_identity(struct typec_partner *partner);
@@ -230,6 +235,10 @@ struct typec_cable *typec_register_cable(struct typec_port *port,
 					 struct typec_cable_desc *desc);
 void typec_unregister_cable(struct typec_cable *cable);
 
+struct typec_cable *typec_cable_get(struct typec_port *port);
+void typec_cable_put(struct typec_cable *cable);
+int typec_cable_is_active(struct typec_cable *cable);
+
 struct typec_plug *typec_register_plug(struct typec_cable *cable,
 				       struct typec_plug_desc *desc);
 void typec_unregister_plug(struct typec_plug *plug);
diff --git a/include/linux/usb/typec_altmode.h b/include/linux/usb/typec_altmode.h
index 9a88c74a1d0d..923ff3af0628 100644
--- a/include/linux/usb/typec_altmode.h
+++ b/include/linux/usb/typec_altmode.h
@@ -55,7 +55,7 @@ static inline void *typec_altmode_get_drvdata(struct typec_altmode *altmode)
  * @activate: User callback for Enter/Exit Mode
  */
 struct typec_altmode_ops {
-	int (*enter)(struct typec_altmode *altmode);
+	int (*enter)(struct typec_altmode *altmode, u32 *vdo);
 	int (*exit)(struct typec_altmode *altmode);
 	void (*attention)(struct typec_altmode *altmode, u32 vdo);
 	int (*vdm)(struct typec_altmode *altmode, const u32 hdr,
@@ -65,7 +65,7 @@ struct typec_altmode_ops {
 	int (*activate)(struct typec_altmode *altmode, int activate);
 };
 
-int typec_altmode_enter(struct typec_altmode *altmode);
+int typec_altmode_enter(struct typec_altmode *altmode, u32 *vdo);
 int typec_altmode_exit(struct typec_altmode *altmode);
 void typec_altmode_attention(struct typec_altmode *altmode, u32 vdo);
 int typec_altmode_vdm(struct typec_altmode *altmode,
@@ -101,6 +101,22 @@ enum {
 	TYPEC_MODE_DEBUG,			/* Debug Accessory */
 };
 
+/*
+ * USB4 also requires that the pins on the connector are repurposed, just like
+ * Alternate Modes. USB4 mode is however not entered with the Enter Mode Command
+ * like the Alternate Modes are, but instead with a special Enter_USB Message.
+ * The Enter_USB Message can also be used for setting to connector to operate in
+ * USB 3.2 or in USB 2.0 mode instead of USB4.
+ *
+ * The Enter_USB specific "USB Modes" are also supplied here as special modal
+ * state values, just like the Accessory Modes.
+ */
+enum {
+	TYPEC_MODE_USB2 = TYPEC_MODE_DEBUG,	/* USB 2.0 mode */
+	TYPEC_MODE_USB3,			/* USB 3.2 mode */
+	TYPEC_MODE_USB4				/* USB4 mode */
+};
+
 #define TYPEC_MODAL_STATE(_state_)	((_state_) + TYPEC_STATE_MODAL)
 
 struct typec_altmode *typec_altmode_get_plug(struct typec_altmode *altmode,
diff --git a/include/linux/usb/typec_mux.h b/include/linux/usb/typec_mux.h
index 873ace5b0cf8..be7292c0be5e 100644
--- a/include/linux/usb/typec_mux.h
+++ b/include/linux/usb/typec_mux.h
@@ -8,6 +8,7 @@
 struct device;
 struct typec_mux;
 struct typec_switch;
+struct typec_altmode;
 struct fwnode_handle;
 
 typedef int (*typec_switch_set_fn_t)(struct typec_switch *sw,
@@ -29,7 +30,14 @@ void typec_switch_unregister(struct typec_switch *sw);
 void typec_switch_set_drvdata(struct typec_switch *sw, void *data);
 void *typec_switch_get_drvdata(struct typec_switch *sw);
 
-typedef int (*typec_mux_set_fn_t)(struct typec_mux *mux, int state);
+struct typec_mux_state {
+	struct typec_altmode *alt;
+	unsigned long mode;
+	void *data;
+};
+
+typedef int (*typec_mux_set_fn_t)(struct typec_mux *mux,
+				  struct typec_mux_state *state);
 
 struct typec_mux_desc {
 	struct fwnode_handle *fwnode;
diff --git a/include/linux/usb/ulpi.h b/include/linux/usb/ulpi.h
index c515765adab7..36c2982780ad 100644
--- a/include/linux/usb/ulpi.h
+++ b/include/linux/usb/ulpi.h
@@ -55,12 +55,23 @@
 #if IS_ENABLED(CONFIG_USB_ULPI)
 struct usb_phy *otg_ulpi_create(struct usb_phy_io_ops *ops,
 					unsigned int flags);
+
+struct usb_phy *devm_otg_ulpi_create(struct device *dev,
+				     struct usb_phy_io_ops *ops,
+				     unsigned int flags);
 #else
 static inline struct usb_phy *otg_ulpi_create(struct usb_phy_io_ops *ops,
 					      unsigned int flags)
 {
 	return NULL;
 }
+
+static inline struct usb_phy *devm_otg_ulpi_create(struct device *dev,
+						   struct usb_phy_io_ops *ops,
+						   unsigned int flags)
+{
+	return NULL;
+}
 #endif
 
 #ifdef CONFIG_USB_ULPI_VIEWPORT
diff --git a/include/linux/usb/usb_phy_generic.h b/include/linux/usb/usb_phy_generic.h
index 7408cf52c710..cd9e70a552a0 100644
--- a/include/linux/usb/usb_phy_generic.h
+++ b/include/linux/usb/usb_phy_generic.h
@@ -3,18 +3,6 @@
 #define __LINUX_USB_NOP_XCEIV_H
 
 #include <linux/usb/otg.h>
-#include <linux/gpio/consumer.h>
-
-struct usb_phy_generic_platform_data {
-	enum usb_phy_type type;
-	unsigned long clk_rate;
-
-	/* if set fails with -EPROBE_DEFER if can't get regulator */
-	unsigned int needs_vcc:1;
-	unsigned int needs_reset:1;	/* deprecated */
-	int gpio_reset;
-	struct gpio_desc *gpiod_vbus;
-};
 
 #if IS_ENABLED(CONFIG_NOP_USB_XCEIV)
 /* sometimes transceivers are accessed only through e.g. ULPI */