diff options
| -rw-r--r-- | drivers/net/phy/adin.c | 138 |
1 files changed, 138 insertions, 0 deletions
diff --git a/drivers/net/phy/adin.c b/drivers/net/phy/adin.c index 6024bf1a9fa2..3727b38addf7 100644 --- a/drivers/net/phy/adin.c +++ b/drivers/net/phy/adin.c @@ -8,6 +8,7 @@ #include <linux/bitfield.h> #include <linux/delay.h> #include <linux/errno.h> +#include <linux/ethtool_netlink.h> #include <linux/init.h> #include <linux/module.h> #include <linux/mii.h> @@ -70,6 +71,31 @@ #define ADIN1300_CLOCK_STOP_REG 0x9400 #define ADIN1300_LPI_WAKE_ERR_CNT_REG 0xa000 +#define ADIN1300_CDIAG_RUN 0xba1b +#define ADIN1300_CDIAG_RUN_EN BIT(0) + +/* + * The XSIM3/2/1 and XSHRT3/2/1 are actually relative. + * For CDIAG_DTLD_RSLTS(0) it's ADIN1300_CDIAG_RSLT_XSIM3/2/1 + * For CDIAG_DTLD_RSLTS(1) it's ADIN1300_CDIAG_RSLT_XSIM3/2/0 + * For CDIAG_DTLD_RSLTS(2) it's ADIN1300_CDIAG_RSLT_XSIM3/1/0 + * For CDIAG_DTLD_RSLTS(3) it's ADIN1300_CDIAG_RSLT_XSIM2/1/0 + */ +#define ADIN1300_CDIAG_DTLD_RSLTS(x) (0xba1d + (x)) +#define ADIN1300_CDIAG_RSLT_BUSY BIT(10) +#define ADIN1300_CDIAG_RSLT_XSIM3 BIT(9) +#define ADIN1300_CDIAG_RSLT_XSIM2 BIT(8) +#define ADIN1300_CDIAG_RSLT_XSIM1 BIT(7) +#define ADIN1300_CDIAG_RSLT_SIM BIT(6) +#define ADIN1300_CDIAG_RSLT_XSHRT3 BIT(5) +#define ADIN1300_CDIAG_RSLT_XSHRT2 BIT(4) +#define ADIN1300_CDIAG_RSLT_XSHRT1 BIT(3) +#define ADIN1300_CDIAG_RSLT_SHRT BIT(2) +#define ADIN1300_CDIAG_RSLT_OPEN BIT(1) +#define ADIN1300_CDIAG_RSLT_GOOD BIT(0) + +#define ADIN1300_CDIAG_FLT_DIST(x) (0xba21 + (x)) + #define ADIN1300_GE_SOFT_RESET_REG 0xff0c #define ADIN1300_GE_SOFT_RESET BIT(0) @@ -733,10 +759,117 @@ static int adin_probe(struct phy_device *phydev) return 0; } +static int adin_cable_test_start(struct phy_device *phydev) +{ + int ret; + + ret = phy_clear_bits(phydev, ADIN1300_PHY_CTRL3, ADIN1300_LINKING_EN); + if (ret < 0) + return ret; + + ret = phy_clear_bits(phydev, ADIN1300_PHY_CTRL1, ADIN1300_DIAG_CLK_EN); + if (ret < 0) + return ret; + + /* wait a bit for the clock to stabilize */ + msleep(50); + + return phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, ADIN1300_CDIAG_RUN, + ADIN1300_CDIAG_RUN_EN); +} + +static int adin_cable_test_report_trans(int result) +{ + int mask; + + if (result & ADIN1300_CDIAG_RSLT_GOOD) + return ETHTOOL_A_CABLE_RESULT_CODE_OK; + if (result & ADIN1300_CDIAG_RSLT_OPEN) + return ETHTOOL_A_CABLE_RESULT_CODE_OPEN; + + /* short with other pairs */ + mask = ADIN1300_CDIAG_RSLT_XSHRT3 | + ADIN1300_CDIAG_RSLT_XSHRT2 | + ADIN1300_CDIAG_RSLT_XSHRT1; + if (result & mask) + return ETHTOOL_A_CABLE_RESULT_CODE_CROSS_SHORT; + + if (result & ADIN1300_CDIAG_RSLT_SHRT) + return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT; + + return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC; +} + +static int adin_cable_test_report_pair(struct phy_device *phydev, + unsigned int pair) +{ + int fault_rslt; + int ret; + + ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, + ADIN1300_CDIAG_DTLD_RSLTS(pair)); + if (ret < 0) + return ret; + + fault_rslt = adin_cable_test_report_trans(ret); + + ret = ethnl_cable_test_result(phydev, pair, fault_rslt); + if (ret < 0) + return ret; + + ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, + ADIN1300_CDIAG_FLT_DIST(pair)); + if (ret < 0) + return ret; + + switch (fault_rslt) { + case ETHTOOL_A_CABLE_RESULT_CODE_OPEN: + case ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT: + case ETHTOOL_A_CABLE_RESULT_CODE_CROSS_SHORT: + return ethnl_cable_test_fault_length(phydev, pair, ret * 100); + default: + return 0; + } +} + +static int adin_cable_test_report(struct phy_device *phydev) +{ + unsigned int pair; + int ret; + + for (pair = ETHTOOL_A_CABLE_PAIR_A; pair <= ETHTOOL_A_CABLE_PAIR_D; pair++) { + ret = adin_cable_test_report_pair(phydev, pair); + if (ret < 0) + return ret; + } + + return 0; +} + +static int adin_cable_test_get_status(struct phy_device *phydev, + bool *finished) +{ + int ret; + + *finished = false; + + ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, ADIN1300_CDIAG_RUN); + if (ret < 0) + return ret; + + if (ret & ADIN1300_CDIAG_RUN_EN) + return 0; + + *finished = true; + + return adin_cable_test_report(phydev); +} + static struct phy_driver adin_driver[] = { { PHY_ID_MATCH_MODEL(PHY_ID_ADIN1200), .name = "ADIN1200", + .flags = PHY_POLL_CABLE_TEST, .probe = adin_probe, .config_init = adin_config_init, .soft_reset = adin_soft_reset, @@ -753,10 +886,13 @@ static struct phy_driver adin_driver[] = { .suspend = genphy_suspend, .read_mmd = adin_read_mmd, .write_mmd = adin_write_mmd, + .cable_test_start = adin_cable_test_start, + .cable_test_get_status = adin_cable_test_get_status, }, { PHY_ID_MATCH_MODEL(PHY_ID_ADIN1300), .name = "ADIN1300", + .flags = PHY_POLL_CABLE_TEST, .probe = adin_probe, .config_init = adin_config_init, .soft_reset = adin_soft_reset, @@ -773,6 +909,8 @@ static struct phy_driver adin_driver[] = { .suspend = genphy_suspend, .read_mmd = adin_read_mmd, .write_mmd = adin_write_mmd, + .cable_test_start = adin_cable_test_start, + .cable_test_get_status = adin_cable_test_get_status, }, }; |