diff options
Diffstat (limited to 'arch')
-rw-r--r-- | arch/powerpc/boot/dts/pdm360ng.dts | 273 |
1 files changed, 31 insertions, 242 deletions
diff --git a/arch/powerpc/boot/dts/pdm360ng.dts b/arch/powerpc/boot/dts/pdm360ng.dts index 94dfa5c9a7f9..0b069477838a 100644 --- a/arch/powerpc/boot/dts/pdm360ng.dts +++ b/arch/powerpc/boot/dts/pdm360ng.dts @@ -13,7 +13,7 @@ * option) any later version. */ -/dts-v1/; +/include/ "mpc5121.dtsi" / { model = "pdm360ng"; @@ -22,38 +22,12 @@ #size-cells = <1>; interrupt-parent = <&ipic>; - aliases { - ethernet0 = ð0; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,5121@0 { - device_type = "cpu"; - reg = <0>; - d-cache-line-size = <0x20>; // 32 bytes - i-cache-line-size = <0x20>; // 32 bytes - d-cache-size = <0x8000>; // L1, 32K - i-cache-size = <0x8000>; // L1, 32K - timebase-frequency = <49500000>;// 49.5 MHz (csb/4) - bus-frequency = <198000000>; // 198 MHz csb bus - clock-frequency = <396000000>; // 396 MHz ppc core - }; - }; - memory { device_type = "memory"; reg = <0x00000000 0x20000000>; // 512MB at 0 }; nfc@40000000 { - compatible = "fsl,mpc5121-nfc"; - reg = <0x40000000 0x100000>; - interrupts = <0x6 0x8>; - #address-cells = <0x1>; - #size-cells = <0x1>; bank-width = <0x1>; chips = <0x1>; @@ -63,17 +37,7 @@ }; }; - sram@50000000 { - compatible = "fsl,mpc5121-sram"; - reg = <0x50000000 0x20000>; // 128K at 0x50000000 - }; - localbus@80000020 { - compatible = "fsl,mpc5121-localbus"; - #address-cells = <2>; - #size-cells = <1>; - reg = <0x80000020 0x40>; - ranges = <0x0 0x0 0xf0000000 0x10000000 /* Flash */ 0x2 0x0 0x50040000 0x00020000>; /* CS2: MRAM */ @@ -129,74 +93,8 @@ }; soc@80000000 { - compatible = "fsl,mpc5121-immr"; - #address-cells = <1>; - #size-cells = <1>; - #interrupt-cells = <2>; - ranges = <0x0 0x80000000 0x400000>; - reg = <0x80000000 0x400000>; - bus-frequency = <66000000>; // 66 MHz ips bus - - // IPIC - // interrupts cell = <intr #, sense> - // sense values match linux IORESOURCE_IRQ_* defines: - // sense == 8: Level, low assertion - // sense == 2: Edge, high-to-low change - // - ipic: interrupt-controller@c00 { - compatible = "fsl,mpc5121-ipic", "fsl,ipic"; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0xc00 0x100>; - }; - - rtc@a00 { // Real time clock - compatible = "fsl,mpc5121-rtc"; - reg = <0xa00 0x100>; - interrupts = <79 0x8 80 0x8>; - }; - - reset@e00 { // Reset module - compatible = "fsl,mpc5121-reset"; - reg = <0xe00 0x100>; - }; - - clock@f00 { // Clock control - compatible = "fsl,mpc5121-clock"; - reg = <0xf00 0x100>; - }; - - pmc@1000{ //Power Management Controller - compatible = "fsl,mpc5121-pmc"; - reg = <0x1000 0x100>; - interrupts = <83 0x2>; - }; - - gpio@1100 { - compatible = "fsl,mpc5121-gpio"; - reg = <0x1100 0x100>; - interrupts = <78 0x8>; - }; - - can@1300 { - compatible = "fsl,mpc5121-mscan"; - interrupts = <12 0x8>; - reg = <0x1300 0x80>; - }; - - can@1380 { - compatible = "fsl,mpc5121-mscan"; - interrupts = <13 0x8>; - reg = <0x1380 0x80>; - }; i2c@1700 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc5121-i2c"; - reg = <0x1700 0x20>; - interrupts = <0x9 0x8>; fsl,preserve-clocking; eeprom@50 { @@ -210,201 +108,92 @@ }; }; - i2c@1740 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc5121-i2c"; - reg = <0x1740 0x20>; - interrupts = <0xb 0x8>; - fsl,preserve-clocking; - }; - - i2ccontrol@1760 { - compatible = "fsl,mpc5121-i2c-ctrl"; - reg = <0x1760 0x8>; - }; - - axe@2000 { - compatible = "fsl,mpc5121-axe"; - reg = <0x2000 0x100>; - interrupts = <42 0x8>; - }; - - display@2100 { - compatible = "fsl,mpc5121-diu"; - reg = <0x2100 0x100>; - interrupts = <64 0x8>; + i2c@1720 { + status = "disabled"; }; - can@2300 { - compatible = "fsl,mpc5121-mscan"; - interrupts = <90 0x8>; - reg = <0x2300 0x80>; - }; - - can@2380 { - compatible = "fsl,mpc5121-mscan"; - interrupts = <91 0x8>; - reg = <0x2380 0x80>; + i2c@1740 { + fsl,preserve-clocking; }; - viu@2400 { - compatible = "fsl,mpc5121-viu"; - reg = <0x2400 0x400>; - interrupts = <67 0x8>; + ethernet@2800 { + phy-handle = <&phy0>; }; mdio@2800 { - compatible = "fsl,mpc5121-fec-mdio"; - reg = <0x2800 0x200>; - #address-cells = <1>; - #size-cells = <0>; - phy: ethernet-phy@0 { + phy0: ethernet-phy@1f { compatible = "smsc,lan8700"; reg = <0x1f>; }; }; - eth0: ethernet@2800 { - compatible = "fsl,mpc5121-fec"; - reg = <0x2800 0x200>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <4 0x8>; - phy-handle = < &phy >; - }; - - // USB1 using external ULPI PHY + /* USB1 using external ULPI PHY */ usb@3000 { - compatible = "fsl,mpc5121-usb2-dr"; - reg = <0x3000 0x600>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <43 0x8>; dr_mode = "host"; - phy_type = "ulpi"; }; - // USB0 using internal UTMI PHY + /* USB0 using internal UTMI PHY */ usb@4000 { - compatible = "fsl,mpc5121-usb2-dr"; - reg = <0x4000 0x600>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <44 0x8>; - dr_mode = "otg"; - phy_type = "utmi_wide"; fsl,invert-pwr-fault; }; - // IO control - ioctl@a000 { - compatible = "fsl,mpc5121-ioctl"; - reg = <0xA000 0x1000>; - }; - - // 512x PSCs are not 52xx PSCs compatible - serial@11000 { + psc@11000 { compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; - cell-index = <0>; - reg = <0x11000 0x100>; - interrupts = <40 0x8>; - fsl,rx-fifo-size = <16>; - fsl,tx-fifo-size = <16>; }; - serial@11100 { + psc@11100 { compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; - cell-index = <1>; - reg = <0x11100 0x100>; - interrupts = <40 0x8>; - fsl,rx-fifo-size = <16>; - fsl,tx-fifo-size = <16>; }; - serial@11200 { + psc@11200 { compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; - cell-index = <2>; - reg = <0x11200 0x100>; - interrupts = <40 0x8>; - fsl,rx-fifo-size = <16>; - fsl,tx-fifo-size = <16>; }; - serial@11300 { + psc@11300 { compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; - cell-index = <3>; - reg = <0x11300 0x100>; - interrupts = <40 0x8>; - fsl,rx-fifo-size = <16>; - fsl,tx-fifo-size = <16>; }; - serial@11400 { + psc@11400 { compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; - cell-index = <4>; - reg = <0x11400 0x100>; - interrupts = <40 0x8>; - fsl,rx-fifo-size = <16>; - fsl,tx-fifo-size = <16>; }; - serial@11600 { - compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; - cell-index = <6>; - reg = <0x11600 0x100>; - interrupts = <40 0x8>; - fsl,rx-fifo-size = <16>; - fsl,tx-fifo-size = <16>; + psc@11500 { + status = "disabled"; }; - serial@11800 { + psc@11600 { compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; - cell-index = <8>; - reg = <0x11800 0x100>; - interrupts = <40 0x8>; - fsl,rx-fifo-size = <16>; - fsl,tx-fifo-size = <16>; }; - serial@11B00 { - compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; - cell-index = <11>; - reg = <0x11B00 0x100>; - interrupts = <40 0x8>; - fsl,rx-fifo-size = <16>; - fsl,tx-fifo-size = <16>; + psc@11700 { + status = "disabled"; }; - pscfifo@11f00 { - compatible = "fsl,mpc5121-psc-fifo"; - reg = <0x11f00 0x100>; - interrupts = <40 0x8>; + psc@11800 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; }; - spi@11900 { + psc@11900 { compatible = "fsl,mpc5121-psc-spi", "fsl,mpc5121-psc"; - cell-index = <9>; #address-cells = <1>; #size-cells = <0>; - reg = <0x11900 0x100>; - interrupts = <40 0x8>; - fsl,rx-fifo-size = <16>; - fsl,tx-fifo-size = <16>; - // 7845 touch screen controller + /* ADS7845 touch screen controller */ ts@0 { compatible = "ti,ads7846"; reg = <0x0>; spi-max-frequency = <3000000>; - // pen irq is GPIO25 + /* pen irq is GPIO25 */ interrupts = <78 0x8>; }; }; - dma@14000 { - compatible = "fsl,mpc5121-dma"; - reg = <0x14000 0x1800>; - interrupts = <65 0x8>; + psc@11a00 { + status = "disabled"; + }; + + psc@11b00 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; }; }; }; |