diff options
Diffstat (limited to 'drivers/clk/bcm')
| -rw-r--r-- | drivers/clk/bcm/clk-bcm2835.c | 43 | ||||
| -rw-r--r-- | drivers/clk/bcm/clk-raspberrypi.c | 11 |
2 files changed, 48 insertions, 6 deletions
diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c index 48a1eb9f2d55..e74fe6219d14 100644 --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c @@ -30,6 +30,7 @@ #include <linux/debugfs.h> #include <linux/delay.h> #include <linux/io.h> +#include <linux/math.h> #include <linux/module.h> #include <linux/of_device.h> #include <linux/platform_device.h> @@ -502,6 +503,8 @@ struct bcm2835_clock_data { bool low_jitter; u32 tcnt_mux; + + bool round_up; }; struct bcm2835_gate_data { @@ -966,9 +969,9 @@ static u32 bcm2835_clock_choose_div(struct clk_hw *hw, return div; } -static long bcm2835_clock_rate_from_divisor(struct bcm2835_clock *clock, - unsigned long parent_rate, - u32 div) +static unsigned long bcm2835_clock_rate_from_divisor(struct bcm2835_clock *clock, + unsigned long parent_rate, + u32 div) { const struct bcm2835_clock_data *data = clock->data; u64 temp; @@ -993,12 +996,34 @@ static long bcm2835_clock_rate_from_divisor(struct bcm2835_clock *clock, return temp; } +static unsigned long bcm2835_round_rate(unsigned long rate) +{ + unsigned long scaler; + unsigned long limit; + + limit = rate / 100000; + + scaler = 1; + while (scaler < limit) + scaler *= 10; + + /* + * If increasing a clock by less than 0.1% changes it + * from ..999.. to ..000.., round up. + */ + if ((rate + scaler - 1) / scaler % 1000 == 0) + rate = roundup(rate, scaler); + + return rate; +} + static unsigned long bcm2835_clock_get_rate(struct clk_hw *hw, unsigned long parent_rate) { struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw); struct bcm2835_cprman *cprman = clock->cprman; const struct bcm2835_clock_data *data = clock->data; + unsigned long rate; u32 div; if (data->int_bits == 0 && data->frac_bits == 0) @@ -1006,7 +1031,12 @@ static unsigned long bcm2835_clock_get_rate(struct clk_hw *hw, div = cprman_read(cprman, data->div_reg); - return bcm2835_clock_rate_from_divisor(clock, parent_rate, div); + rate = bcm2835_clock_rate_from_divisor(clock, parent_rate, div); + + if (data->round_up) + rate = bcm2835_round_rate(rate); + + return rate; } static void bcm2835_clock_wait_busy(struct bcm2835_clock *clock) @@ -1784,7 +1814,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { .load_mask = CM_PLLC_LOADPER, .hold_mask = CM_PLLC_HOLDPER, .fixed_divider = 1, - .flags = CLK_SET_RATE_PARENT), + .flags = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT), /* * PLLD is the display PLL, used to drive DSI display panels. @@ -2143,7 +2173,8 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { .div_reg = CM_UARTDIV, .int_bits = 10, .frac_bits = 12, - .tcnt_mux = 28), + .tcnt_mux = 28, + .round_up = true), /* TV encoder clock. Only operating frequency is 108Mhz. */ [BCM2835_CLOCK_VEC] = REGISTER_PER_CLK( diff --git a/drivers/clk/bcm/clk-raspberrypi.c b/drivers/clk/bcm/clk-raspberrypi.c index 876b37b8683c..679f4649a7ef 100644 --- a/drivers/clk/bcm/clk-raspberrypi.c +++ b/drivers/clk/bcm/clk-raspberrypi.c @@ -33,6 +33,7 @@ enum rpi_firmware_clk_id { RPI_FIRMWARE_EMMC2_CLK_ID, RPI_FIRMWARE_M2MC_CLK_ID, RPI_FIRMWARE_PIXEL_BVB_CLK_ID, + RPI_FIRMWARE_VEC_CLK_ID, RPI_FIRMWARE_NUM_CLK_ID, }; @@ -51,6 +52,7 @@ static char *rpi_firmware_clk_names[] = { [RPI_FIRMWARE_EMMC2_CLK_ID] = "emmc2", [RPI_FIRMWARE_M2MC_CLK_ID] = "m2mc", [RPI_FIRMWARE_PIXEL_BVB_CLK_ID] = "pixel-bvb", + [RPI_FIRMWARE_VEC_CLK_ID] = "vec", }; #define RPI_FIRMWARE_STATE_ENABLE_BIT BIT(0) @@ -129,9 +131,18 @@ raspberrypi_clk_variants[RPI_FIRMWARE_NUM_CLK_ID] = { [RPI_FIRMWARE_V3D_CLK_ID] = { .export = true, }, + [RPI_FIRMWARE_PIXEL_CLK_ID] = { + .export = true, + }, + [RPI_FIRMWARE_HEVC_CLK_ID] = { + .export = true, + }, [RPI_FIRMWARE_PIXEL_BVB_CLK_ID] = { .export = true, }, + [RPI_FIRMWARE_VEC_CLK_ID] = { + .export = true, + }, }; /* |