diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-core.c')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-core.c | 71 |
1 files changed, 26 insertions, 45 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 45ec5cfe3fcf..885167f8168d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -67,30 +67,6 @@ u32 iwl_debug_level; const u8 iwl_bcast_addr[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }; - -/* This function both allocates and initializes hw and priv. */ -struct ieee80211_hw *iwl_alloc_all(struct iwl_cfg *cfg) -{ - struct iwl_priv *priv; - /* mac80211 allocates memory for this device instance, including - * space for this driver's private structure */ - struct ieee80211_hw *hw; - - hw = ieee80211_alloc_hw(sizeof(struct iwl_priv), - cfg->ops->ieee80211_ops); - if (hw == NULL) { - pr_err("%s: Can not allocate network device\n", - cfg->name); - goto out; - } - - priv = hw->priv; - priv->hw = hw; - -out: - return hw; -} - #define MAX_BIT_RATE_40_MHZ 150 /* Mbps */ #define MAX_BIT_RATE_20_MHZ 72 /* Mbps */ static void iwlcore_init_ht_hw_capab(const struct iwl_priv *priv, @@ -965,12 +941,10 @@ void iwl_irq_handle_error(struct iwl_priv *priv) IWL_ERR(priv, "Loaded firmware version: %s\n", priv->hw->wiphy->fw_version); - priv->cfg->ops->lib->dump_nic_error_log(priv); - if (priv->cfg->ops->lib->dump_csr) - priv->cfg->ops->lib->dump_csr(priv); - if (priv->cfg->ops->lib->dump_fh) - priv->cfg->ops->lib->dump_fh(priv, NULL, false); - priv->cfg->ops->lib->dump_nic_event_log(priv, false, NULL, false); + iwl_dump_nic_error_log(priv); + iwl_dump_csr(priv); + iwl_dump_fh(priv, NULL, false); + iwl_dump_nic_event_log(priv, false, NULL, false); #ifdef CONFIG_IWLWIFI_DEBUG if (iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) iwl_print_rx_config_cmd(priv, @@ -1051,7 +1025,6 @@ int iwl_apm_init(struct iwl_priv *priv) /* * Enable HAP INTA (interrupt from management bus) to * wake device's PCI Express link L1a -> L0s - * NOTE: This is no-op for 3945 (non-existent bit) */ iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG, CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A); @@ -1064,20 +1037,18 @@ int iwl_apm_init(struct iwl_priv *priv) * If not (unlikely), enable L0S, so there is at least some * power savings, even without L1. */ - if (priv->cfg->base_params->set_l0s) { - lctl = iwl_pcie_link_ctl(priv); - if ((lctl & PCI_CFG_LINK_CTRL_VAL_L1_EN) == - PCI_CFG_LINK_CTRL_VAL_L1_EN) { - /* L1-ASPM enabled; disable(!) L0S */ - iwl_set_bit(priv, CSR_GIO_REG, - CSR_GIO_REG_VAL_L0S_ENABLED); - IWL_DEBUG_POWER(priv, "L1 Enabled; Disabling L0S\n"); - } else { - /* L1-ASPM disabled; enable(!) L0S */ - iwl_clear_bit(priv, CSR_GIO_REG, - CSR_GIO_REG_VAL_L0S_ENABLED); - IWL_DEBUG_POWER(priv, "L1 Disabled; Enabling L0S\n"); - } + lctl = iwl_pcie_link_ctl(priv); + if ((lctl & PCI_CFG_LINK_CTRL_VAL_L1_EN) == + PCI_CFG_LINK_CTRL_VAL_L1_EN) { + /* L1-ASPM enabled; disable(!) L0S */ + iwl_set_bit(priv, CSR_GIO_REG, + CSR_GIO_REG_VAL_L0S_ENABLED); + IWL_DEBUG_POWER(priv, "L1 Enabled; Disabling L0S\n"); + } else { + /* L1-ASPM disabled; enable(!) L0S */ + iwl_clear_bit(priv, CSR_GIO_REG, + CSR_GIO_REG_VAL_L0S_ENABLED); + IWL_DEBUG_POWER(priv, "L1 Disabled; Enabling L0S\n"); } /* Configure analog phase-lock-loop before activating to D0A */ @@ -1777,6 +1748,15 @@ int iwl_mac_change_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif, mutex_lock(&priv->mutex); + if (!ctx->vif || !iwl_is_ready_rf(priv)) { + /* + * Huh? But wait ... this can maybe happen when + * we're in the middle of a firmware restart! + */ + err = -EBUSY; + goto out; + } + interface_modes = ctx->interface_modes | ctx->exclusive_interface_modes; if (!(interface_modes & BIT(newtype))) { @@ -1804,6 +1784,7 @@ int iwl_mac_change_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif, /* success */ iwl_teardown_interface(priv, vif, true); vif->type = newtype; + vif->p2p = newp2p; err = iwl_setup_interface(priv, ctx); WARN_ON(err); /* |