diff options
Diffstat (limited to 'drivers/usb/gadget/udc/net2280.h')
-rw-r--r-- | drivers/usb/gadget/udc/net2280.h | 403 |
1 files changed, 403 insertions, 0 deletions
diff --git a/drivers/usb/gadget/udc/net2280.h b/drivers/usb/gadget/udc/net2280.h new file mode 100644 index 000000000000..03f15242d794 --- /dev/null +++ b/drivers/usb/gadget/udc/net2280.h @@ -0,0 +1,403 @@ +/* + * NetChip 2280 high/full speed USB device controller. + * Unlike many such controllers, this one talks PCI. + */ + +/* + * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com) + * Copyright (C) 2003 David Brownell + * Copyright (C) 2014 Ricardo Ribalda - Qtechnology/AS + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/usb/net2280.h> +#include <linux/usb/usb338x.h> + +/*-------------------------------------------------------------------------*/ + +#ifdef __KERNEL__ + +/* indexed registers [11.10] are accessed indirectly + * caller must own the device lock. + */ + +static inline u32 get_idx_reg(struct net2280_regs __iomem *regs, u32 index) +{ + writel(index, ®s->idxaddr); + /* NOTE: synchs device/cpu memory views */ + return readl(®s->idxdata); +} + +static inline void +set_idx_reg(struct net2280_regs __iomem *regs, u32 index, u32 value) +{ + writel(index, ®s->idxaddr); + writel(value, ®s->idxdata); + /* posted, may not be visible yet */ +} + +#endif /* __KERNEL__ */ + +#define PCI_VENDOR_ID_PLX_LEGACY 0x17cc + +#define PLX_LEGACY BIT(0) +#define PLX_2280 BIT(1) +#define PLX_SUPERSPEED BIT(2) + +#define REG_DIAG 0x0 +#define RETRY_COUNTER 16 +#define FORCE_PCI_SERR 11 +#define FORCE_PCI_INTERRUPT 10 +#define FORCE_USB_INTERRUPT 9 +#define FORCE_CPU_INTERRUPT 8 +#define ILLEGAL_BYTE_ENABLES 5 +#define FAST_TIMES 4 +#define FORCE_RECEIVE_ERROR 2 +#define FORCE_TRANSMIT_CRC_ERROR 0 +#define REG_FRAME 0x02 /* from last sof */ +#define REG_CHIPREV 0x03 /* in bcd */ +#define REG_HS_NAK_RATE 0x0a /* NAK per N uframes */ + +#define CHIPREV_1 0x0100 +#define CHIPREV_1A 0x0110 + +/* DEFECT 7374 */ +#define DEFECT_7374_NUMBEROF_MAX_WAIT_LOOPS 200 +#define DEFECT_7374_PROCESSOR_WAIT_TIME 10 + +/* ep0 max packet size */ +#define EP0_SS_MAX_PACKET_SIZE 0x200 +#define EP0_HS_MAX_PACKET_SIZE 0x40 +#ifdef __KERNEL__ + +/*-------------------------------------------------------------------------*/ + +/* [8.3] for scatter/gather i/o + * use struct net2280_dma_regs bitfields + */ +struct net2280_dma { + __le32 dmacount; + __le32 dmaaddr; /* the buffer */ + __le32 dmadesc; /* next dma descriptor */ + __le32 _reserved; +} __aligned(16); + +/*-------------------------------------------------------------------------*/ + +/* DRIVER DATA STRUCTURES and UTILITIES */ + +struct net2280_ep { + struct usb_ep ep; + struct net2280_ep_regs __iomem *cfg; + struct net2280_ep_regs __iomem *regs; + struct net2280_dma_regs __iomem *dma; + struct net2280_dma *dummy; + struct usb338x_fifo_regs __iomem *fiforegs; + dma_addr_t td_dma; /* of dummy */ + struct net2280 *dev; + unsigned long irqs; + unsigned is_halt:1, dma_started:1; + + /* analogous to a host-side qh */ + struct list_head queue; + const struct usb_endpoint_descriptor *desc; + unsigned num : 8, + fifo_size : 12, + in_fifo_validate : 1, + out_overflow : 1, + stopped : 1, + wedged : 1, + is_in : 1, + is_iso : 1, + responded : 1; +}; + +static inline void allow_status(struct net2280_ep *ep) +{ + /* ep0 only */ + writel(BIT(CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE) | + BIT(CLEAR_NAK_OUT_PACKETS) | + BIT(CLEAR_NAK_OUT_PACKETS_MODE), + &ep->regs->ep_rsp); + ep->stopped = 1; +} + +static void allow_status_338x(struct net2280_ep *ep) +{ + /* + * Control Status Phase Handshake was set by the chip when the setup + * packet arrived. While set, the chip automatically NAKs the host's + * Status Phase tokens. + */ + writel(BIT(CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE), &ep->regs->ep_rsp); + + ep->stopped = 1; + + /* TD 9.9 Halt Endpoint test. TD 9.22 set feature test. */ + ep->responded = 0; +} + +struct net2280_request { + struct usb_request req; + struct net2280_dma *td; + dma_addr_t td_dma; + struct list_head queue; + unsigned mapped : 1, + valid : 1; +}; + +struct net2280 { + /* each pci device provides one gadget, several endpoints */ + struct usb_gadget gadget; + spinlock_t lock; + struct net2280_ep ep[9]; + struct usb_gadget_driver *driver; + unsigned enabled : 1, + protocol_stall : 1, + softconnect : 1, + got_irq : 1, + region:1, + u1_enable:1, + u2_enable:1, + ltm_enable:1, + wakeup_enable:1, + selfpowered:1, + addressed_state:1; + u16 chiprev; + int enhanced_mode; + int n_ep; + kernel_ulong_t quirks; + + + /* pci state used to access those endpoints */ + struct pci_dev *pdev; + struct net2280_regs __iomem *regs; + struct net2280_usb_regs __iomem *usb; + struct usb338x_usb_ext_regs __iomem *usb_ext; + struct net2280_pci_regs __iomem *pci; + struct net2280_dma_regs __iomem *dma; + struct net2280_dep_regs __iomem *dep; + struct net2280_ep_regs __iomem *epregs; + struct usb338x_fifo_regs __iomem *fiforegs; + struct usb338x_ll_regs __iomem *llregs; + struct usb338x_ll_lfps_regs __iomem *ll_lfps_regs; + struct usb338x_ll_tsn_regs __iomem *ll_tsn_regs; + struct usb338x_ll_chi_regs __iomem *ll_chicken_reg; + struct usb338x_pl_regs __iomem *plregs; + + struct pci_pool *requests; + /* statistics...*/ +}; + +static inline void set_halt(struct net2280_ep *ep) +{ + /* ep0 and bulk/intr endpoints */ + writel(BIT(CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE) | + /* set NAK_OUT for erratum 0114 */ + ((ep->dev->chiprev == CHIPREV_1) << SET_NAK_OUT_PACKETS) | + BIT(SET_ENDPOINT_HALT), + &ep->regs->ep_rsp); +} + +static inline void clear_halt(struct net2280_ep *ep) +{ + /* ep0 and bulk/intr endpoints */ + writel(BIT(CLEAR_ENDPOINT_HALT) | + BIT(CLEAR_ENDPOINT_TOGGLE) | + /* + * unless the gadget driver left a short packet in the + * fifo, this reverses the erratum 0114 workaround. + */ + ((ep->dev->chiprev == CHIPREV_1) << CLEAR_NAK_OUT_PACKETS), + &ep->regs->ep_rsp); +} + +/* + * FSM value for Defect 7374 (U1U2 Test) is managed in + * chip's SCRATCH register: + */ +#define DEFECT7374_FSM_FIELD 28 + +/* Waiting for Control Read: + * - A transition to this state indicates a fresh USB connection, + * before the first Setup Packet. The connection speed is not + * known. Firmware is waiting for the first Control Read. + * - Starting state: This state can be thought of as the FSM's typical + * starting state. + * - Tip: Upon the first SS Control Read the FSM never + * returns to this state. + */ +#define DEFECT7374_FSM_WAITING_FOR_CONTROL_READ BIT(DEFECT7374_FSM_FIELD) + +/* Non-SS Control Read: + * - A transition to this state indicates detection of the first HS + * or FS Control Read. + * - Tip: Upon the first SS Control Read the FSM never + * returns to this state. + */ +#define DEFECT7374_FSM_NON_SS_CONTROL_READ (2 << DEFECT7374_FSM_FIELD) + +/* SS Control Read: + * - A transition to this state indicates detection of the + * first SS Control Read. + * - This state indicates workaround completion. Workarounds no longer + * need to be applied (as long as the chip remains powered up). + * - Tip: Once in this state the FSM state does not change (until + * the chip's power is lost and restored). + * - This can be thought of as the final state of the FSM; + * the FSM 'locks-up' in this state until the chip loses power. + */ +#define DEFECT7374_FSM_SS_CONTROL_READ (3 << DEFECT7374_FSM_FIELD) + +#ifdef USE_RDK_LEDS + +static inline void net2280_led_init(struct net2280 *dev) +{ + /* LED3 (green) is on during USB activity. note erratum 0113. */ + writel(BIT(GPIO3_LED_SELECT) | + BIT(GPIO3_OUTPUT_ENABLE) | + BIT(GPIO2_OUTPUT_ENABLE) | + BIT(GPIO1_OUTPUT_ENABLE) | + BIT(GPIO0_OUTPUT_ENABLE), + &dev->regs->gpioctl); +} + +/* indicate speed with bi-color LED 0/1 */ +static inline +void net2280_led_speed(struct net2280 *dev, enum usb_device_speed speed) +{ + u32 val = readl(&dev->regs->gpioctl); + switch (speed) { + case USB_SPEED_SUPER: /* green + red */ + val |= BIT(GPIO0_DATA) | BIT(GPIO1_DATA); + break; + case USB_SPEED_HIGH: /* green */ + val &= ~BIT(GPIO0_DATA); + val |= BIT(GPIO1_DATA); + break; + case USB_SPEED_FULL: /* red */ + val &= ~BIT(GPIO1_DATA); + val |= BIT(GPIO0_DATA); + break; + default: /* (off/black) */ + val &= ~(BIT(GPIO1_DATA) | BIT(GPIO0_DATA)); + break; + } + writel(val, &dev->regs->gpioctl); +} + +/* indicate power with LED 2 */ +static inline void net2280_led_active(struct net2280 *dev, int is_active) +{ + u32 val = readl(&dev->regs->gpioctl); + + /* FIXME this LED never seems to turn on.*/ + if (is_active) + val |= GPIO2_DATA; + else + val &= ~GPIO2_DATA; + writel(val, &dev->regs->gpioctl); +} + +static inline void net2280_led_shutdown(struct net2280 *dev) +{ + /* turn off all four GPIO*_DATA bits */ + writel(readl(&dev->regs->gpioctl) & ~0x0f, + &dev->regs->gpioctl); +} + +#else + +#define net2280_led_init(dev) do { } while (0) +#define net2280_led_speed(dev, speed) do { } while (0) +#define net2280_led_shutdown(dev) do { } while (0) + +#endif + +/*-------------------------------------------------------------------------*/ + +#define ep_dbg(ndev, fmt, args...) \ + dev_dbg((&((ndev)->pdev->dev)), fmt, ##args) + +#define ep_vdbg(ndev, fmt, args...) \ + dev_vdbg((&((ndev)->pdev->dev)), fmt, ##args) + +#define ep_info(ndev, fmt, args...) \ + dev_info((&((ndev)->pdev->dev)), fmt, ##args) + +#define ep_warn(ndev, fmt, args...) \ + dev_warn((&((ndev)->pdev->dev)), fmt, ##args) + +#define ep_err(ndev, fmt, args...) \ + dev_err((&((ndev)->pdev->dev)), fmt, ##args) + +/*-------------------------------------------------------------------------*/ + +static inline void set_fifo_bytecount(struct net2280_ep *ep, unsigned count) +{ + if (ep->dev->pdev->vendor == 0x17cc) + writeb(count, 2 + (u8 __iomem *) &ep->regs->ep_cfg); + else{ + u32 tmp = readl(&ep->cfg->ep_cfg) & + (~(0x07 << EP_FIFO_BYTE_COUNT)); + writel(tmp | (count << EP_FIFO_BYTE_COUNT), &ep->cfg->ep_cfg); + } +} + +static inline void start_out_naking(struct net2280_ep *ep) +{ + /* NOTE: hardware races lurk here, and PING protocol issues */ + writel(BIT(SET_NAK_OUT_PACKETS), &ep->regs->ep_rsp); + /* synch with device */ + readl(&ep->regs->ep_rsp); +} + +#ifdef DEBUG +static inline void assert_out_naking(struct net2280_ep *ep, const char *where) +{ + u32 tmp = readl(&ep->regs->ep_stat); + + if ((tmp & BIT(NAK_OUT_PACKETS)) == 0) { + ep_dbg(ep->dev, "%s %s %08x !NAK\n", + ep->ep.name, where, tmp); + writel(BIT(SET_NAK_OUT_PACKETS), + &ep->regs->ep_rsp); + } +} +#define ASSERT_OUT_NAKING(ep) assert_out_naking(ep, __func__) +#else +#define ASSERT_OUT_NAKING(ep) do {} while (0) +#endif + +static inline void stop_out_naking(struct net2280_ep *ep) +{ + u32 tmp; + + tmp = readl(&ep->regs->ep_stat); + if ((tmp & BIT(NAK_OUT_PACKETS)) != 0) + writel(BIT(CLEAR_NAK_OUT_PACKETS), &ep->regs->ep_rsp); +} + + +static inline void set_max_speed(struct net2280_ep *ep, u32 max) +{ + u32 reg; + static const u32 ep_enhanced[9] = { 0x10, 0x60, 0x30, 0x80, + 0x50, 0x20, 0x70, 0x40, 0x90 }; + + if (ep->dev->enhanced_mode) + reg = ep_enhanced[ep->num]; + else{ + reg = (ep->num + 1) * 0x10; + if (ep->dev->gadget.speed != USB_SPEED_HIGH) + reg += 1; + } + + set_idx_reg(ep->dev->regs, reg, max); +} + +#endif /* __KERNEL__ */ |