diff options
Diffstat (limited to 'include/linux/usb/ch9.h')
| -rw-r--r-- | include/linux/usb/ch9.h | 104 |
1 files changed, 96 insertions, 8 deletions
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index 93223638f702..ab461948b579 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -123,8 +123,33 @@ #define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* (otg) other RH port does */ #define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */ +/* + * Test Mode Selectors + * See USB 2.0 spec Table 9-7 + */ +#define TEST_J 1 +#define TEST_K 2 +#define TEST_SE0_NAK 3 +#define TEST_PACKET 4 +#define TEST_FORCE_EN 5 + +/* + * New Feature Selectors as added by USB 3.0 + * See USB 3.0 spec Table 9-6 + */ +#define USB_DEVICE_U1_ENABLE 48 /* dev may initiate U1 transition */ +#define USB_DEVICE_U2_ENABLE 49 /* dev may initiate U2 transition */ +#define USB_DEVICE_LTM_ENABLE 50 /* dev may send LTM */ +#define USB_INTRF_FUNC_SUSPEND 0 /* function suspend */ + +#define USB_INTR_FUNC_SUSPEND_OPT_MASK 0xFF00 + #define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */ +/* Bit array elements as returned by the USB_REQ_GET_STATUS request. */ +#define USB_DEV_STAT_U1_ENABLED 2 /* transition into U1 state */ +#define USB_DEV_STAT_U2_ENABLED 3 /* transition into U2 state */ +#define USB_DEV_STAT_LTM_ENABLED 4 /* Latency tolerance messages */ /** * struct usb_ctrlrequest - SETUP data for a USB device control request @@ -191,6 +216,8 @@ struct usb_ctrlrequest { #define USB_DT_WIRE_ADAPTER 0x21 #define USB_DT_RPIPE 0x22 #define USB_DT_CS_RADIO_CONTROL 0x23 +/* From the T10 UAS specification */ +#define USB_DT_PIPE_USAGE 0x24 /* From the USB 3.0 spec */ #define USB_DT_SS_ENDPOINT_COMP 0x30 @@ -258,6 +285,8 @@ struct usb_device_descriptor { #define USB_CLASS_APP_SPEC 0xfe #define USB_CLASS_VENDOR_SPEC 0xff +#define USB_SUBCLASS_VENDOR_SPEC 0xff + /*-------------------------------------------------------------------------*/ /* USB_DT_CONFIG: Configuration descriptor information. @@ -348,6 +377,12 @@ struct usb_endpoint_descriptor { #define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */ #define USB_ENDPOINT_DIR_MASK 0x80 +#define USB_ENDPOINT_SYNCTYPE 0x0c +#define USB_ENDPOINT_SYNC_NONE (0 << 2) +#define USB_ENDPOINT_SYNC_ASYNC (1 << 2) +#define USB_ENDPOINT_SYNC_ADAPTIVE (2 << 2) +#define USB_ENDPOINT_SYNC_SYNC (3 << 2) + #define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */ #define USB_ENDPOINT_XFER_CONTROL 0 #define USB_ENDPOINT_XFER_ISOC 1 @@ -467,7 +502,7 @@ static inline int usb_endpoint_xfer_isoc( static inline int usb_endpoint_is_bulk_in( const struct usb_endpoint_descriptor *epd) { - return (usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd)); + return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd); } /** @@ -480,7 +515,7 @@ static inline int usb_endpoint_is_bulk_in( static inline int usb_endpoint_is_bulk_out( const struct usb_endpoint_descriptor *epd) { - return (usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd)); + return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd); } /** @@ -493,7 +528,7 @@ static inline int usb_endpoint_is_bulk_out( static inline int usb_endpoint_is_int_in( const struct usb_endpoint_descriptor *epd) { - return (usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd)); + return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd); } /** @@ -506,7 +541,7 @@ static inline int usb_endpoint_is_int_in( static inline int usb_endpoint_is_int_out( const struct usb_endpoint_descriptor *epd) { - return (usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd)); + return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd); } /** @@ -519,7 +554,7 @@ static inline int usb_endpoint_is_int_out( static inline int usb_endpoint_is_isoc_in( const struct usb_endpoint_descriptor *epd) { - return (usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd)); + return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd); } /** @@ -532,7 +567,7 @@ static inline int usb_endpoint_is_isoc_in( static inline int usb_endpoint_is_isoc_out( const struct usb_endpoint_descriptor *epd) { - return (usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd)); + return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd); } /*-------------------------------------------------------------------------*/ @@ -548,6 +583,8 @@ struct usb_ss_ep_comp_descriptor { } __attribute__ ((packed)); #define USB_DT_SS_EP_COMP_SIZE 6 +/* Bits 4:0 of bmAttributes if this is a bulk endpoint */ +#define USB_SS_MAX_STREAMS(p) (1 << (p & 0x1f)) /*-------------------------------------------------------------------------*/ @@ -663,6 +700,7 @@ struct usb_bos_descriptor { __u8 bNumDeviceCaps; } __attribute__((packed)); +#define USB_DT_BOS_SIZE 5 /*-------------------------------------------------------------------------*/ /* USB_DT_DEVICE_CAPABILITY: grouped with BOS */ @@ -700,16 +738,56 @@ struct usb_wireless_cap_descriptor { /* Ultra Wide Band */ __u8 bReserved; } __attribute__((packed)); +/* USB 2.0 Extension descriptor */ #define USB_CAP_TYPE_EXT 2 struct usb_ext_cap_descriptor { /* Link Power Management */ __u8 bLength; __u8 bDescriptorType; __u8 bDevCapabilityType; - __u8 bmAttributes; + __le32 bmAttributes; #define USB_LPM_SUPPORT (1 << 1) /* supports LPM */ } __attribute__((packed)); +#define USB_DT_USB_EXT_CAP_SIZE 7 + +/* + * SuperSpeed USB Capability descriptor: Defines the set of SuperSpeed USB + * specific device level capabilities + */ +#define USB_SS_CAP_TYPE 3 +struct usb_ss_cap_descriptor { /* Link Power Management */ + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; + __u8 bmAttributes; +#define USB_LTM_SUPPORT (1 << 1) /* supports LTM */ + __le16 wSpeedSupported; +#define USB_LOW_SPEED_OPERATION (1) /* Low speed operation */ +#define USB_FULL_SPEED_OPERATION (1 << 1) /* Full speed operation */ +#define USB_HIGH_SPEED_OPERATION (1 << 2) /* High speed operation */ +#define USB_5GBPS_OPERATION (1 << 3) /* Operation at 5Gbps */ + __u8 bFunctionalitySupport; + __u8 bU1devExitLat; + __le16 bU2DevExitLat; +} __attribute__((packed)); + +#define USB_DT_USB_SS_CAP_SIZE 10 + +/* + * Container ID Capability descriptor: Defines the instance unique ID used to + * identify the instance across all operating modes + */ +#define CONTAINER_ID_TYPE 4 +struct usb_ss_container_id_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; + __u8 bReserved; + __u8 ContainerID[16]; /* 128-bit number */ +} __attribute__((packed)); + +#define USB_DT_USB_SS_CONTN_ID_SIZE 20 /*-------------------------------------------------------------------------*/ /* USB_DT_WIRELESS_ENDPOINT_COMP: companion descriptor associated with @@ -767,7 +845,7 @@ enum usb_device_speed { USB_SPEED_UNKNOWN = 0, /* enumerating */ USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */ USB_SPEED_HIGH, /* usb 2.0 */ - USB_SPEED_VARIABLE, /* wireless (usb 2.5) */ + USB_SPEED_WIRELESS, /* wireless (usb 2.5) */ USB_SPEED_SUPER, /* usb 3.0 */ }; @@ -796,4 +874,14 @@ enum usb_device_state { */ }; +/*-------------------------------------------------------------------------*/ + +/* + * As per USB compliance update, a device that is actively drawing + * more than 100mA from USB must report itself as bus-powered in + * the GetStatus(DEVICE) call. + * http://compliance.usb.org/index.asp?UpdateFile=Electrical&Format=Standard#34 + */ +#define USB_SELF_POWER_VBUS_MAX_DRAW 100 + #endif /* __LINUX_USB_CH9_H */ |