diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/netdevice.h | 83 | ||||
| -rw-r--r-- | include/uapi/linux/if.h | 83 |
2 files changed, 83 insertions, 83 deletions
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 5e84483c0650..1a869488b8ae 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1147,6 +1147,89 @@ struct net_device_ops { void *priv); }; +/** + * enum net_device_priv_flags - &struct net_device priv_flags + * + * These are the &struct net_device, they are only set internally + * by drivers and used in the kernel. These flags are invisible to + * userspace, this means that the order of these flags can change + * during any kernel release. + * + * You should have a pretty good reason to be extending these flags. + * + * @IFF_802_1Q_VLAN: 802.1Q VLAN device + * @IFF_EBRIDGE: Ethernet bridging device + * @IFF_SLAVE_INACTIVE: bonding slave not the curr. active + * @IFF_MASTER_8023AD: bonding master, 802.3ad + * @IFF_MASTER_ALB: bonding master, balance-alb + * @IFF_BONDING: bonding master or slave + * @IFF_SLAVE_NEEDARP: need ARPs for validation + * @IFF_ISATAP: ISATAP interface (RFC4214) + * @IFF_MASTER_ARPMON: bonding master, ARP mon in use + * @IFF_WAN_HDLC: WAN HDLC device + * @IFF_XMIT_DST_RELEASE: dev_hard_start_xmit() is allowed to + * release skb->dst + * @IFF_DONT_BRIDGE: disallow bridging this ether dev + * @IFF_DISABLE_NETPOLL: disable netpoll at run-time + * @IFF_MACVLAN_PORT: device used as macvlan port + * @IFF_BRIDGE_PORT: device used as bridge port + * @IFF_OVS_DATAPATH: device used as Open vSwitch datapath port + * @IFF_TX_SKB_SHARING: The interface supports sharing skbs on transmit + * @IFF_UNICAST_FLT: Supports unicast filtering + * @IFF_TEAM_PORT: device used as team port + * @IFF_SUPP_NOFCS: device supports sending custom FCS + * @IFF_LIVE_ADDR_CHANGE: device supports hardware address + * change when it's running + * @IFF_MACVLAN: Macvlan device + */ +enum netdev_priv_flags { + IFF_802_1Q_VLAN = 1<<0, + IFF_EBRIDGE = 1<<1, + IFF_SLAVE_INACTIVE = 1<<2, + IFF_MASTER_8023AD = 1<<3, + IFF_MASTER_ALB = 1<<4, + IFF_BONDING = 1<<5, + IFF_SLAVE_NEEDARP = 1<<6, + IFF_ISATAP = 1<<7, + IFF_MASTER_ARPMON = 1<<8, + IFF_WAN_HDLC = 1<<9, + IFF_XMIT_DST_RELEASE = 1<<10, + IFF_DONT_BRIDGE = 1<<11, + IFF_DISABLE_NETPOLL = 1<<12, + IFF_MACVLAN_PORT = 1<<13, + IFF_BRIDGE_PORT = 1<<14, + IFF_OVS_DATAPATH = 1<<15, + IFF_TX_SKB_SHARING = 1<<16, + IFF_UNICAST_FLT = 1<<17, + IFF_TEAM_PORT = 1<<18, + IFF_SUPP_NOFCS = 1<<19, + IFF_LIVE_ADDR_CHANGE = 1<<20, + IFF_MACVLAN = 1<<21, +}; + +#define IFF_802_1Q_VLAN IFF_802_1Q_VLAN +#define IFF_EBRIDGE IFF_EBRIDGE +#define IFF_SLAVE_INACTIVE IFF_SLAVE_INACTIVE +#define IFF_MASTER_8023AD IFF_MASTER_8023AD +#define IFF_MASTER_ALB IFF_MASTER_ALB +#define IFF_BONDING IFF_BONDING +#define IFF_SLAVE_NEEDARP IFF_SLAVE_NEEDARP +#define IFF_ISATAP IFF_ISATAP +#define IFF_MASTER_ARPMON IFF_MASTER_ARPMON +#define IFF_WAN_HDLC IFF_WAN_HDLC +#define IFF_XMIT_DST_RELEASE IFF_XMIT_DST_RELEASE +#define IFF_DONT_BRIDGE IFF_DONT_BRIDGE +#define IFF_DISABLE_NETPOLL IFF_DISABLE_NETPOLL +#define IFF_MACVLAN_PORT IFF_MACVLAN_PORT +#define IFF_BRIDGE_PORT IFF_BRIDGE_PORT +#define IFF_OVS_DATAPATH IFF_OVS_DATAPATH +#define IFF_TX_SKB_SHARING IFF_TX_SKB_SHARING +#define IFF_UNICAST_FLT IFF_UNICAST_FLT +#define IFF_TEAM_PORT IFF_TEAM_PORT +#define IFF_SUPP_NOFCS IFF_SUPP_NOFCS +#define IFF_LIVE_ADDR_CHANGE IFF_LIVE_ADDR_CHANGE +#define IFF_MACVLAN IFF_MACVLAN + /* * The DEVICE structure. * Actually, this whole structure is a big mistake. It mixes I/O diff --git a/include/uapi/linux/if.h b/include/uapi/linux/if.h index 42ec87994cf6..9cf2394f0bcf 100644 --- a/include/uapi/linux/if.h +++ b/include/uapi/linux/if.h @@ -112,89 +112,6 @@ enum net_device_flags { #define IFF_VOLATILE (IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|IFF_ECHO|\ IFF_MASTER|IFF_SLAVE|IFF_RUNNING|IFF_LOWER_UP|IFF_DORMANT) -/** - * enum net_device_priv_flags - &struct net_device priv_flags - * - * These are the &struct net_device, they are only set internally - * by drivers and used in the kernel. These flags are invisible to - * userspace, this means that the order of these flags can change - * during any kernel release. - * - * You should have a pretty good reason to be extending these flags. - * - * @IFF_802_1Q_VLAN: 802.1Q VLAN device - * @IFF_EBRIDGE: Ethernet bridging device - * @IFF_SLAVE_INACTIVE: bonding slave not the curr. active - * @IFF_MASTER_8023AD: bonding master, 802.3ad - * @IFF_MASTER_ALB: bonding master, balance-alb - * @IFF_BONDING: bonding master or slave - * @IFF_SLAVE_NEEDARP: need ARPs for validation - * @IFF_ISATAP: ISATAP interface (RFC4214) - * @IFF_MASTER_ARPMON: bonding master, ARP mon in use - * @IFF_WAN_HDLC: WAN HDLC device - * @IFF_XMIT_DST_RELEASE: dev_hard_start_xmit() is allowed to - * release skb->dst - * @IFF_DONT_BRIDGE: disallow bridging this ether dev - * @IFF_DISABLE_NETPOLL: disable netpoll at run-time - * @IFF_MACVLAN_PORT: device used as macvlan port - * @IFF_BRIDGE_PORT: device used as bridge port - * @IFF_OVS_DATAPATH: device used as Open vSwitch datapath port - * @IFF_TX_SKB_SHARING: The interface supports sharing skbs on transmit - * @IFF_UNICAST_FLT: Supports unicast filtering - * @IFF_TEAM_PORT: device used as team port - * @IFF_SUPP_NOFCS: device supports sending custom FCS - * @IFF_LIVE_ADDR_CHANGE: device supports hardware address - * change when it's running - * @IFF_MACVLAN: Macvlan device - */ -enum netdev_priv_flags { - IFF_802_1Q_VLAN = 1<<0, - IFF_EBRIDGE = 1<<1, - IFF_SLAVE_INACTIVE = 1<<2, - IFF_MASTER_8023AD = 1<<3, - IFF_MASTER_ALB = 1<<4, - IFF_BONDING = 1<<5, - IFF_SLAVE_NEEDARP = 1<<6, - IFF_ISATAP = 1<<7, - IFF_MASTER_ARPMON = 1<<8, - IFF_WAN_HDLC = 1<<9, - IFF_XMIT_DST_RELEASE = 1<<10, - IFF_DONT_BRIDGE = 1<<11, - IFF_DISABLE_NETPOLL = 1<<12, - IFF_MACVLAN_PORT = 1<<13, - IFF_BRIDGE_PORT = 1<<14, - IFF_OVS_DATAPATH = 1<<15, - IFF_TX_SKB_SHARING = 1<<16, - IFF_UNICAST_FLT = 1<<17, - IFF_TEAM_PORT = 1<<18, - IFF_SUPP_NOFCS = 1<<19, - IFF_LIVE_ADDR_CHANGE = 1<<20, - IFF_MACVLAN = 1<<21, -}; - -#define IFF_802_1Q_VLAN IFF_802_1Q_VLAN -#define IFF_EBRIDGE IFF_EBRIDGE -#define IFF_SLAVE_INACTIVE IFF_SLAVE_INACTIVE -#define IFF_MASTER_8023AD IFF_MASTER_8023AD -#define IFF_MASTER_ALB IFF_MASTER_ALB -#define IFF_BONDING IFF_BONDING -#define IFF_SLAVE_NEEDARP IFF_SLAVE_NEEDARP -#define IFF_ISATAP IFF_ISATAP -#define IFF_MASTER_ARPMON IFF_MASTER_ARPMON -#define IFF_WAN_HDLC IFF_WAN_HDLC -#define IFF_XMIT_DST_RELEASE IFF_XMIT_DST_RELEASE -#define IFF_DONT_BRIDGE IFF_DONT_BRIDGE -#define IFF_DISABLE_NETPOLL IFF_DISABLE_NETPOLL -#define IFF_MACVLAN_PORT IFF_MACVLAN_PORT -#define IFF_BRIDGE_PORT IFF_BRIDGE_PORT -#define IFF_OVS_DATAPATH IFF_OVS_DATAPATH -#define IFF_TX_SKB_SHARING IFF_TX_SKB_SHARING -#define IFF_UNICAST_FLT IFF_UNICAST_FLT -#define IFF_TEAM_PORT IFF_TEAM_PORT -#define IFF_SUPP_NOFCS IFF_SUPP_NOFCS -#define IFF_LIVE_ADDR_CHANGE IFF_LIVE_ADDR_CHANGE -#define IFF_MACVLAN IFF_MACVLAN - #define IF_GET_IFACE 0x0001 /* for querying only */ #define IF_GET_PROTO 0x0002 |