summaryrefslogtreecommitdiff
path: root/net/mac80211/rc80211_minstrel.c
diff options
context:
space:
mode:
Diffstat (limited to 'net/mac80211/rc80211_minstrel.c')
-rw-r--r--net/mac80211/rc80211_minstrel.c206
1 files changed, 113 insertions, 93 deletions
diff --git a/net/mac80211/rc80211_minstrel.c b/net/mac80211/rc80211_minstrel.c
index 1c36c9b4fa4a..ac7ef5414bde 100644
--- a/net/mac80211/rc80211_minstrel.c
+++ b/net/mac80211/rc80211_minstrel.c
@@ -84,6 +84,50 @@ minstrel_sort_best_tp_rates(struct minstrel_sta_info *mi, int i, u8 *tp_list)
}
static void
+minstrel_set_rate(struct minstrel_sta_info *mi, struct ieee80211_sta_rates *ratetbl,
+ int offset, int idx)
+{
+ struct minstrel_rate *r = &mi->r[idx];
+
+ ratetbl->rate[offset].idx = r->rix;
+ ratetbl->rate[offset].count = r->adjusted_retry_count;
+ ratetbl->rate[offset].count_cts = r->retry_count_cts;
+ ratetbl->rate[offset].count_rts = r->retry_count_rtscts;
+}
+
+static void
+minstrel_update_rates(struct minstrel_priv *mp, struct minstrel_sta_info *mi)
+{
+ struct ieee80211_sta_rates *ratetbl;
+ int i = 0;
+
+ ratetbl = kzalloc(sizeof(*ratetbl), GFP_ATOMIC);
+ if (!ratetbl)
+ return;
+
+ /* Start with max_tp_rate */
+ minstrel_set_rate(mi, ratetbl, i++, mi->max_tp_rate[0]);
+
+ if (mp->hw->max_rates >= 3) {
+ /* At least 3 tx rates supported, use max_tp_rate2 next */
+ minstrel_set_rate(mi, ratetbl, i++, mi->max_tp_rate[1]);
+ }
+
+ if (mp->hw->max_rates >= 2) {
+ /* At least 2 tx rates supported, use max_prob_rate next */
+ minstrel_set_rate(mi, ratetbl, i++, mi->max_prob_rate);
+ }
+
+ /* Use lowest rate last */
+ ratetbl->rate[i].idx = mi->lowest_rix;
+ ratetbl->rate[i].count = mp->max_retry;
+ ratetbl->rate[i].count_cts = mp->max_retry;
+ ratetbl->rate[i].count_rts = mp->max_retry;
+
+ rate_control_set_rates(mp->hw, mi->sta, ratetbl);
+}
+
+static void
minstrel_update_stats(struct minstrel_priv *mp, struct minstrel_sta_info *mi)
{
u8 tmp_tp_rate[MAX_THR_RATES];
@@ -161,6 +205,8 @@ minstrel_update_stats(struct minstrel_priv *mp, struct minstrel_sta_info *mi)
/* Reset update timer */
mi->stats_update = jiffies;
+
+ minstrel_update_rates(mp, mi);
}
static void
@@ -209,9 +255,9 @@ minstrel_get_retry_count(struct minstrel_rate *mr,
{
unsigned int retry = mr->adjusted_retry_count;
- if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS)
+ if (info->control.use_rts)
retry = max(2U, min(mr->retry_count_rtscts, retry));
- else if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT)
+ else if (info->control.use_cts_prot)
retry = max(2U, min(mr->retry_count_cts, retry));
return retry;
}
@@ -240,13 +286,12 @@ minstrel_get_rate(void *priv, struct ieee80211_sta *sta,
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct minstrel_sta_info *mi = priv_sta;
struct minstrel_priv *mp = priv;
- struct ieee80211_tx_rate *ar = info->control.rates;
- unsigned int ndx, sample_ndx = 0;
+ struct ieee80211_tx_rate *rate = &info->control.rates[0];
+ struct minstrel_rate *msr, *mr;
+ unsigned int ndx;
bool mrr_capable;
- bool indirect_rate_sampling = false;
- bool rate_sampling = false;
- int i, delta;
- int mrr_ndx[3];
+ bool prev_sample = mi->prev_sample;
+ int delta;
int sampling_ratio;
/* management/no-ack frames do not use rate control */
@@ -262,107 +307,75 @@ minstrel_get_rate(void *priv, struct ieee80211_sta *sta,
else
sampling_ratio = mp->lookaround_rate;
- /* init rateindex [ndx] with max throughput rate */
- ndx = mi->max_tp_rate[0];
-
/* increase sum packet counter */
mi->packet_count++;
delta = (mi->packet_count * sampling_ratio / 100) -
(mi->sample_count + mi->sample_deferred / 2);
- /* delta > 0: sampling required */
- if ((delta > 0) && (mrr_capable || !mi->prev_sample)) {
- struct minstrel_rate *msr;
- if (mi->packet_count >= 10000) {
- mi->sample_deferred = 0;
- mi->sample_count = 0;
- mi->packet_count = 0;
- } else if (delta > mi->n_rates * 2) {
- /* With multi-rate retry, not every planned sample
- * attempt actually gets used, due to the way the retry
- * chain is set up - [max_tp,sample,prob,lowest] for
- * sample_rate < max_tp.
- *
- * If there's too much sampling backlog and the link
- * starts getting worse, minstrel would start bursting
- * out lots of sampling frames, which would result
- * in a large throughput loss. */
- mi->sample_count += (delta - mi->n_rates * 2);
- }
+ /* delta < 0: no sampling required */
+ mi->prev_sample = false;
+ if (delta < 0 || (!mrr_capable && prev_sample))
+ return;
- /* get next random rate sample */
- sample_ndx = minstrel_get_next_sample(mi);
- msr = &mi->r[sample_ndx];
- rate_sampling = true;
-
- /* Decide if direct ( 1st mrr stage) or indirect (2nd mrr stage)
- * rate sampling method should be used.
- * Respect such rates that are not sampled for 20 interations.
- */
- if (mrr_capable &&
- msr->perfect_tx_time > mi->r[ndx].perfect_tx_time &&
- msr->sample_skipped < 20)
- indirect_rate_sampling = true;
-
- if (!indirect_rate_sampling) {
- if (msr->sample_limit != 0) {
- ndx = sample_ndx;
- mi->sample_count++;
- if (msr->sample_limit > 0)
- msr->sample_limit--;
- } else
- rate_sampling = false;
- } else {
- /* Only use IEEE80211_TX_CTL_RATE_CTRL_PROBE to mark
- * packets that have the sampling rate deferred to the
- * second MRR stage. Increase the sample counter only
- * if the deferred sample rate was actually used.
- * Use the sample_deferred counter to make sure that
- * the sampling is not done in large bursts */
- info->flags |= IEEE80211_TX_CTL_RATE_CTRL_PROBE;
- mi->sample_deferred++;
- }
+ if (mi->packet_count >= 10000) {
+ mi->sample_deferred = 0;
+ mi->sample_count = 0;
+ mi->packet_count = 0;
+ } else if (delta > mi->n_rates * 2) {
+ /* With multi-rate retry, not every planned sample
+ * attempt actually gets used, due to the way the retry
+ * chain is set up - [max_tp,sample,prob,lowest] for
+ * sample_rate < max_tp.
+ *
+ * If there's too much sampling backlog and the link
+ * starts getting worse, minstrel would start bursting
+ * out lots of sampling frames, which would result
+ * in a large throughput loss. */
+ mi->sample_count += (delta - mi->n_rates * 2);
+ }
+
+ /* get next random rate sample */
+ ndx = minstrel_get_next_sample(mi);
+ msr = &mi->r[ndx];
+ mr = &mi->r[mi->max_tp_rate[0]];
+
+ /* Decide if direct ( 1st mrr stage) or indirect (2nd mrr stage)
+ * rate sampling method should be used.
+ * Respect such rates that are not sampled for 20 interations.
+ */
+ if (mrr_capable &&
+ msr->perfect_tx_time > mr->perfect_tx_time &&
+ msr->sample_skipped < 20) {
+ /* Only use IEEE80211_TX_CTL_RATE_CTRL_PROBE to mark
+ * packets that have the sampling rate deferred to the
+ * second MRR stage. Increase the sample counter only
+ * if the deferred sample rate was actually used.
+ * Use the sample_deferred counter to make sure that
+ * the sampling is not done in large bursts */
+ info->flags |= IEEE80211_TX_CTL_RATE_CTRL_PROBE;
+ rate++;
+ mi->sample_deferred++;
+ } else {
+ if (!msr->sample_limit != 0)
+ return;
+
+ mi->sample_count++;
+ if (msr->sample_limit > 0)
+ msr->sample_limit--;
}
- mi->prev_sample = rate_sampling;
/* If we're not using MRR and the sampling rate already
* has a probability of >95%, we shouldn't be attempting
* to use it, as this only wastes precious airtime */
- if (!mrr_capable && rate_sampling &&
+ if (!mrr_capable &&
(mi->r[ndx].probability > MINSTREL_FRAC(95, 100)))
- ndx = mi->max_tp_rate[0];
-
- /* mrr setup for 1st stage */
- ar[0].idx = mi->r[ndx].rix;
- ar[0].count = minstrel_get_retry_count(&mi->r[ndx], info);
-
- /* non mrr setup for 2nd stage */
- if (!mrr_capable) {
- if (!rate_sampling)
- ar[0].count = mp->max_retry;
- ar[1].idx = mi->lowest_rix;
- ar[1].count = mp->max_retry;
return;
- }
- /* mrr setup for 2nd stage */
- if (rate_sampling) {
- if (indirect_rate_sampling)
- mrr_ndx[0] = sample_ndx;
- else
- mrr_ndx[0] = mi->max_tp_rate[0];
- } else {
- mrr_ndx[0] = mi->max_tp_rate[1];
- }
+ mi->prev_sample = true;
- /* mrr setup for 3rd & 4th stage */
- mrr_ndx[1] = mi->max_prob_rate;
- mrr_ndx[2] = 0;
- for (i = 1; i < 4; i++) {
- ar[i].idx = mi->r[mrr_ndx[i - 1]].rix;
- ar[i].count = mi->r[mrr_ndx[i - 1]].adjusted_retry_count;
- }
+ rate->idx = mi->r[ndx].rix;
+ rate->count = minstrel_get_retry_count(&mi->r[ndx], info);
}
@@ -412,12 +425,16 @@ minstrel_rate_init(void *priv, struct ieee80211_supported_band *sband,
unsigned int i, n = 0;
unsigned int t_slot = 9; /* FIXME: get real slot time */
+ mi->sta = sta;
mi->lowest_rix = rate_lowest_index(sband, sta);
ctl_rate = &sband->bitrates[mi->lowest_rix];
mi->sp_ack_dur = ieee80211_frame_duration(sband->band, 10,
ctl_rate->bitrate,
!!(ctl_rate->flags & IEEE80211_RATE_ERP_G), 1);
+ memset(mi->max_tp_rate, 0, sizeof(mi->max_tp_rate));
+ mi->max_prob_rate = 0;
+
for (i = 0; i < sband->n_bitrates; i++) {
struct minstrel_rate *mr = &mi->r[n];
unsigned int tx_time = 0, tx_time_cts = 0, tx_time_rtscts = 0;
@@ -460,6 +477,8 @@ minstrel_rate_init(void *priv, struct ieee80211_supported_band *sband,
} while ((tx_time < mp->segment_size) &&
(++mr->retry_count < mp->max_retry));
mr->adjusted_retry_count = mr->retry_count;
+ if (!(sband->bitrates[i].flags & IEEE80211_RATE_ERP_G))
+ mr->retry_count_cts = mr->retry_count;
}
for (i = n; i < sband->n_bitrates; i++) {
@@ -471,6 +490,7 @@ minstrel_rate_init(void *priv, struct ieee80211_supported_band *sband,
mi->stats_update = jiffies;
init_sample_table(mi);
+ minstrel_update_rates(mp, mi);
}
static void *