summaryrefslogtreecommitdiff
path: root/fs/nfs/flexfilelayout/flexfilelayout.c
AgeCommit message (Collapse)Author
2016-12-25ktime: Get rid of ktime_equal()Thomas Gleixner
No point in going through loops and hoops instead of just comparing the values. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
2016-12-25ktime: Get rid of the unionThomas Gleixner
ktime is a union because the initial implementation stored the time in scalar nanoseconds on 64 bit machine and in a endianess optimized timespec variant for 32bit machines. The Y2038 cleanup removed the timespec variant and switched everything to scalar nanoseconds. The union remained, but become completely pointless. Get rid of the union and just keep ktime_t as simple typedef of type s64. The conversion was done with coccinelle and some manual mopping up. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
2016-12-19pNFS/flexfiles: delete deviceid, don't mark inactiveWeston Andros Adamson
Instead of marking a device inactive, remove it from the cache entirely. Flexfiles has a way to report errors back to the server, so we don't want to stop devices from being tried again for 120 seconds. Signed-off-by: Weston Andros Adamson <dros@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-12-09pNFS/flexfiles: Ensure we have enough buffer for layoutreturnTrond Myklebust
The flexfiles client can piggyback both layout errors and layoutstats as part of the layoutreturn. Both these payloads can get large, with 20 layout error entries taking up about 1.2K, and 4 layoutstats entries taking up another 1K. This patch allows a maximum payload of 4k by allocating a full page. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-12-09pNFS/flexfiles: Remove a redundant parameter in ff_layout_encode_ioerr()Trond Myklebust
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-12-08pNFS/flexfiles: Fix a deadlock on LAYOUTGETFred Isaman
We encountered a deadlock where the SEQUENCE that accompanied the LAYOUTGET triggered a session drain, while ff_layout_alloc_lseg triggered a GETDEVICEINFO. The GETDEVICEINFO hung waiting for the session drain, while the LAYOUTGET held the slot waiting for alloc_lseg to finish. Avoid this by moving the call to nfs4_find_get_deviceid out of ff_layout_alloc_lseg and into nfs4_ff_layout_prepare_ds. Signed-off-by: Fred Isaman <fred.isaman@gmail.com> [dros@primarydata.com: pNFS/flexfiles: fix races in ff_layout_mirror_valid] Signed-off-by: Weston Andros Adamson <dros@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-12-03pNFS/flexfiles: Support sending layoutstats in layoutreturnTrond Myklebust
Add the ability to send an array of layoutstats entries as part of layoutreturn. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-12-03pNFS/flexfiles: Minor refactoring before adding iostats to layoutreturnTrond Myklebust
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-12-03NFS: Fix up read of mirror statsTrond Myklebust
Need to lock while reading in order to ensure 64-bit reads are correct. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-12-03pNFS/flexfiles: Clean up layoutstatsTrond Myklebust
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-12-03pNFS/flexfiles: Refactor encoding of the layoutreturn payloadTrond Myklebust
Add the layout error payload to the flexfiles layoutreturn private data, and set up the encoding mechanisms. This is a refactoring in preparation for adding the layout iostats payload. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-12-02pNFS/flexfiles: Only send layoutstats updates for mirrors that were updatedTrond Myklebust
If there have been no reads or writes to a given mirror since the last layoutstats update, then don't resend the same data. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-12-02pNFS/flexfiles: Don't attempt to send layoutstats if there are no entriesTrond Myklebust
If the list of mirrors is empty, then don't send an RPC call. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-12-01pNFS: Get rid of unnecessary layout parameter in encode_layoutreturn callbackTrond Myklebust
The parameter is already present in the "args" structure. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-12-01pNFS: Fix a deadlock between read resends and layoutreturnTrond Myklebust
We must not call nfs_pageio_init_read() on a new nfs_pageio_descriptor while holding a reference to a layout segment, as that can deadlock pnfs_update_layout(). Fixes: d67ae825a59d6 ("pnfs/flexfiles: Add the FlexFile Layout Driver") Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Cc: stable@vger.kernel.org # v4.0+
2016-09-27NFSv4.x: Allow callers of nfs_remove_bad_delegation() to specify a stateidTrond Myklebust
Allow the callers of nfs_remove_bad_delegation() to specify the stateid that needs to be marked as bad. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Tested-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-08-29pNFS/flexfiles: Fix an Oopsable condition when connection to the DS failsTrond Myklebust
If the attempt to connect to a DS fails inside ff_layout_pg_init_read or ff_layout_pg_init_write, then we currently end up clearing the layout segment carried by the struct nfs_pageio_descriptor, causing an Oops when we later call into ff_layout_read_pagelist/ff_layout_write_pagelist. The fix is to ensure we return the layout and then retry. Fixes: 446ca2195303 ("pNFS/flexfiles: When initing reads or writes, we...") Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-08-14pNFS/flexfiles: Fix layoutstat periodic reportingTrond Myklebust
Putting the periodicity timer in the mirror instances is causing non-scalable reporting behaviour and missed reporting intervals. When you recall layouts and/or implement client side mirroring, it leads to consecutive reports with only a few ms between RPC calls. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Fixes: d0379a5d066a9 ("pNFS/flexfiles: Support server-supplied...")
2016-07-05pNFS: Files and flexfiles always need to commit before layoutcommitTrond Myklebust
So ensure that we mark the layout for commit once the write is done, and then ensure that the commit to ds is finished before sending layoutcommit. Note that by doing this, we're able to optimise away the commit for the case of servers that don't need layoutcommit in order to return updated attributes. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-07-05pNFS/flexfiles: Clean up calls to pnfs_set_layoutcommit()Trond Myklebust
Let's just have one place where we check ff_layout_need_layoutcommit(). Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-07-05pNFS/flexfiles: Fix layoutcommit after a commit to DSTrond Myklebust
We should always do a layoutcommit after commit to DS, except if the layout segment we're using has set FF_FLAGS_NO_LAYOUTCOMMIT. Fixes: d67ae825a59d ("pnfs/flexfiles: Add the FlexFile Layout Driver") Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-05-26pnfs: pnfs_update_layout needs to consider if strict iomode checking is onTom Haynes
As flexfiles has FF_FLAGS_NO_READ_IO, there is a need to generically support enforcing that a IOMODE_RW segment will not allow READ I/O. Signed-off-by: Tom Haynes <loghyr@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-05-26nfs/flexfiles: Use the layout segment for reading unless it a IOMODE_RW and ↵Tom Haynes
reading is disabled Signed-off-by: Tom Haynes <loghyr@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-05-17flexfiles: remove pointless setting of NFS_LAYOUT_RETURN_REQUESTEDJeff Layton
Setting just the NFS_LAYOUT_RETURN_REQUESTED flag doesn't do anything, unless there are lsegs that are also being marked for return. At the point where that happens this flag is also set, so these set_bit calls don't do anything useful. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-05-17pnfs: don't merge new ff lsegs with ones that have LAYOUTRETURN bit setJeff Layton
Otherwise, we'll end up returning layouts that we've just received if the client issues a new LAYOUTGET prior to the LAYOUTRETURN. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-05-17pNFS/flexfiles: When initing reads or writes, we might have to retry ↵Tom Haynes
connecting to DSes If we are initializing reads or writes and can not connect to a DS, then check whether or not IO is allowed through the MDS. If it is allowed, reset to the MDS. Else, fail the layout segment and force a retry of a new layout segment. Signed-off-by: Tom Haynes <loghyr@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-05-17pNFS/flexfiles: When checking for available DSes, conditionally check for MDS ioTom Haynes
Whenever we check to see if we have the needed number of DSes for the action, we may also have to check to see whether IO is allowed to go to the MDS or not. [jlayton: fix merge conflict due to lack of localio patches here] Signed-off-by: Tom Haynes <loghyr@primarydata.com> Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-05-17pNFS/flexfile: Fix erroneous fall back to read/write through the MDSTrond Myklebust
This patch fixes a problem whereby the pNFS client falls back to doing reads and writes through the metadata server even when the layout flag FF_FLAGS_NO_IO_THRU_MDS is set. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-05-17NFSv4: Label stateids with the typeTrond Myklebust
In order to more easily distinguish what kind of stateid we are dealing with, introduce a type that can be used to label the stateid structure. The label will be useful both for debugging, but also when dealing with operations like SETATTR, READ and WRITE that can take several different types of stateid as arguments. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-05-09nfs: have flexfiles mirror keep creds for both ro and rw layoutsJeff Layton
A mirror can be shared between multiple layouts, even with different iomodes. That makes stats gathering simpler, but it causes a problem when we get different creds in READ vs. RW layouts. The current code drops the newer credentials onto the floor when this occurs. That's problematic when you fetch a READ layout first, and then a RW. If the READ layout doesn't have the correct creds to do a write, then writes will fail. We could just overwrite the READ credentials with the RW ones, but that would break the ability for the server to fence the layout for reads if things go awry. We need to be able to revert to the earlier READ creds if the RW layout is returned afterward. The simplest fix is to just keep two sets of creds per mirror. One for READ layouts and one for RW, and then use the appropriate set depending on the iomode of the layout segment. Also fix up some RCU nits that sparse found. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-05-09nfs: get a reference to the credential in ff_layout_alloc_lsegJeff Layton
We're just as likely to have allocation problems here as we would if we delay looking up the credential like we currently do. Fix the code to get a rpc_cred reference early, as soon as the mirror is set up. This allows us to eliminate the mirror early if there is a problem getting an rpc credential. This also allows us to drop the uid/gid from the layout_mirror struct as well. In the event that we find an existing mirror where this one would go, we swap in the new creds unconditionally, and drop the reference to the old one. Note that the old ff_layout_update_mirror_cred function wouldn't set this pointer unless the DS version was 3, but we don't know what the DS version is at this point. I'm a little unclear on why it did that as you still need creds to talk to v4 servers as well. I have the code set it regardless of the DS version here. Also note the change to using generic creds instead of calling lookup_cred directly. With that change, we also need to populate the group_info pointer in the acred as some functions expect that to never be NULL. Instead of allocating one every time however, we can allocate one when the module is loaded and share it since the group_info is refcounted. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-05-09nfs: have ff_layout_get_ds_cred take a reference to the credJeff Layton
In later patches, we're going to want to allow the creds to be updated when we get a new layout with updated creds. Have this function take a reference to the cred that is later put once the call has been dispatched. Also, prepare for this change by ensuring we follow RCU rules when getting a reference to the cred as well. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-05-09NFS: Save struct inode * inside nfs_commit_info to clarify usage of i_lockDave Wysochanski
Commit ea2cf22 created nfs_commit_info and saved &inode->i_lock inside this NFS specific structure. This obscures the usage of i_lock. Instead, save struct inode * so later it's clear the spinlock taken is i_lock. Should be no functional change. Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-01-27NFS: Cleanup - rename NFS_LAYOUT_RETURN_BEFORE_CLOSETrond Myklebust
NFS_LAYOUT_RETURN_BEFORE_CLOSE is being used to signal that a layoutreturn is needed, either due to a layout recall or to a layout error. Rename it to NFS_LAYOUT_RETURN_REQUESTED in order to clarify its purpose. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-01-22Merge branch 'bugfixes'Trond Myklebust
* bugfixes: pNFS/flexfiles: Fix an XDR encoding bug in layoutreturn pNFS/flexfiles: Improve merging of errors in LAYOUTRETURN
2016-01-22pNFS/flexfiles: Fix an XDR encoding bug in layoutreturnTrond Myklebust
We must not skip encoding the statistics, or the server will see an XDR encoding error. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Cc: stable@vger.kernel.org # 4.0+
2016-01-07Merge branch 'bugfixes'Trond Myklebust
* bugfixes: SUNRPC: Fixup socket wait for memory SUNRPC: Fix a missing break in rpc_anyaddr() pNFS/flexfiles: Fix an Oopsable typo in ff_mirror_match_fh() NFS: Fix attribute cache revalidation NFS: Ensure we revalidate attributes before using execute_ok() NFS: Flush reclaim writes using FLUSH_COND_STABLE NFS: Background flush should not be low priority NFSv4.1/pnfs: Fixup an lo->plh_block_lgets imbalance in layoutreturn NFSv4: Don't perform cached access checks before we've OPENed the file NFS: Allow the combination pNFS and labeled NFS NFS42: handle layoutstats stateid error nfs: Fix race in __update_open_stateid() nfs: fix missing assignment in nfs4_sequence_done tracepoint
2016-01-04Merge branch 'pnfs_generic'Trond Myklebust
* pnfs_generic: NFSv4.1/pNFS: Cleanup constify struct pnfs_layout_range arguments NFSv4.1/pnfs: Cleanup copying of pnfs_layout_range structures NFSv4.1/pNFS: Cleanup pnfs_mark_matching_lsegs_invalid() NFSv4.1/pNFS: Fix a race in initiate_file_draining() NFSv4.1/pNFS: pnfs_error_mark_layout_for_return() must always return layout NFSv4.1/pNFS: pnfs_mark_matching_lsegs_return() should set the iomode NFSv4.1/pNFS: Use nfs4_stateid_copy for copying stateids NFSv4.1/pNFS: Don't pass stateids by value to pnfs_send_layoutreturn() NFS: Relax requirements in nfs_flush_incompatible NFSv4.1/pNFS: Don't queue up a new commit if the layout segment is invalid NFS: Allow multiple commit requests in flight per file NFS/pNFS: Fix up pNFS write reschedule layering violations and bugs NFSv4: List stateid information in the callback tracepoints NFSv4.1/pNFS: Don't return NFS4ERR_DELAY unnecessarily in CB_LAYOUTRECALL NFSv4.1/pNFS: Ensure we enforce RFC5661 Section 12.5.5.2.1 pNFS: If we have to delay the layout callback, mark the layout for return NFSv4.1/pNFS: Add a helper to mark the layout as returned pNFS: Ensure nfs4_layoutget_prepare returns the correct error
2015-12-31NFS/pNFS: Fix up pNFS write reschedule layering violations and bugsTrond Myklebust
The flexfiles layout in particular, seems to want to poke around in the O_DIRECT flags when retransmitting. This patch sets up an interface to allow it to call back into O_DIRECT to handle retransmission correctly. It also fixes a potential bug whereby we could change the behaviour of O_DIRECT if an error is already pending. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-12-30pNFS/flexfiles: Fix an Oopsable typo in ff_mirror_match_fh()Trond Myklebust
Jeff reports seeing an Oops in ff_layout_alloc_lseg. Turns out copy+paste has played cruel tricks on a nested loop. Reported-by: Jeff Layton <jeff.layton@primarydata.com> Cc: stable@vger.kernel.org # 4.3+ Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-12-28pNFS/flexfiles: Ensure we record layoutstats even if RPC is terminated earlyTrond Myklebust
Currently, we will only record the layoutstats correctly if the RPC call successfully obtains a slot. If we exit before that happens, then we may find ourselves starting the busy timer through the call in ff_layout_(read|write)_prepare_layoutstats, but never stopping it. The same thing happens if we're doing DA-DS. The fix is to ensure that we catch these cases in the rpc_release() callback. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-12-28pNFS: Add flag to track if we've called nfs4_ff_layout_stat_io_start_read/writeTrond Myklebust
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-12-28pNFS/flexfiles: Fix a statistics gathering imbalanceTrond Myklebust
When we replay a failed read, write or commit to the dataserver, we need to ensure that we call ff_layout_read_prepare_v3(), ff_layout_write_prepare_v3 or ff_layout_commit_prepare_v3() so that we reset the statistics. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-12-28pNFS/flexfiles: Don't prevent flexfiles client from retrying LAYOUTGETTrond Myklebust
Fix a bug in which flexfiles clients are falling back to I/O through the MDS even when the FF_FLAGS_NO_IO_THRU_MDS flag is set. The flexfiles client will always report errors through the LAYOUTRETURN and/or LAYOUTERROR mechanisms, so it should normally be safe for it to retry the LAYOUTGET until it fails or succeeds. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-12-28pnfs/flexfiles: count io stat in rpc_count_stats callbackPeng Tao
If client ever restarts IO due to some errors, we'll endup mis-counting IO stats if we do the counting in .rpc_done callback. Move it to .rpc_count_stats callback that is only called when releasing RPC. Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-12-28pnfs/flexfiles: do not mark delay-like status as DS failurePeng Tao
We just need to delay and retry in these cases. Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-12-28NFS41: pop some layoutget errors to applicationPeng Tao
For ERESTARTSYS/EIO/EROFS/ENOSPC/E2BIG in layoutget, we should just bail out instead of hiding the error and retrying inband IO. Change all the call sites to pop the error all the way up. Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-12-28pNFS/flexfiles: Support server-supplied layoutstats sampling periodTrond Myklebust
Some servers want to be able to control the frequency with which clients report layoutstats, for instance, in order to monitor QoS for a particular file or set of file. In order to support this, the flexfiles layout allows the server to pass this info as a hint in the layout payload. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-11-02pNFS/flexfiles: Add support for FF_FLAGS_NO_IO_THRU_MDSTrond Myklebust
For loosely coupled pNFS/flexfiles systems, there is often no advantage at all in going through the MDS for I/O, since the MDS is subject to the same limitations as all other clients when talking to DSes. If a DS is unresponsive, I/O through the MDS will fail. For such systems, the only scalable solution is to have the pNFS clients retry doing pNFS, and so the protocol now provides a flag that allows the pNFS server to signal this. If LAYOUTGET returns FF_FLAGS_NO_IO_THRU_MDS, then we should assume that the MDS wants the client to retry using these devices, even if they were previously marked as being unavailable. To do so, we add a helper, ff_layout_mark_devices_valid() that will be called from layoutget. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-11-02pNFS/flexfiles: When mirrored, retry failed reads by switching mirrorsTrond Myklebust
If the pNFS/flexfiles file is mirrored, and a read to one mirror fails, then we should bump the mirror index, so that we retry to a different mirror. Once we've iterated through all mirrors and all failed, we can return the layout and issue a new LAYOUTGET. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-31 16:28:46 +0000