ab8500: add set_mode/get_mode support

ST-Ericsson Linux next: -
ST-Ericsson ID: ER339084
ST-Ericsson FOSS-OUT ID: Trivial

Signed-off-by: Ludovic Barré <ludovic.barre@stericsson.com>
Signed-off-by: Emeric Vigier <emeric.vigier@stericsson.com>
Change-Id: Ia3fed509bedfb0f4327a3f62103922f4d038b08e
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/22743
Reviewed-by: QATEST
Reviewed-by: Bengt JONSSON <bengt.g.jonsson@stericsson.com>

1 files changed, 71 insertions, 0 deletions

diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index 354962d8f6b..96bf7a50a38 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -34,6 +34,8 @@
  * @update_bank: bank to control on/off
  * @update_reg: register to control on/off
  * @update_mask: mask to enable/disable regulator
+ * @update_val: bits holding the regulator current mode
+ * @update_val_idle: bits to enable the regulator in idle (low power) mode
  * @update_val_enable: bits to enable the regulator in normal (high power) mode
  * @voltage_bank: bank to control regulator voltage
  * @voltage_reg: register to control regulator voltage
@@ -53,6 +55,8 @@ struct ab8500_regulator_info {
 	u8 update_bank;
 	u8 update_reg;
 	u8 update_mask;
+	u8 update_val;
+	u8 update_val_idle;
 	u8 update_val_enable;
 	u8 voltage_bank;
 	u8 voltage_reg;
@@ -154,6 +158,63 @@ static int ab8500_regulator_disable(struct regulator_dev *rdev)
 	return ret;
 }
 
+static int ab8500_regulator_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+	if (info == NULL) {
+		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * update_val_enable is protected by mutex
+	 * into regulator/core.c layout
+	 */
+	switch (mode) {
+	case REGULATOR_MODE_NORMAL:
+		info->update_val = info->update_val_enable;
+		break;
+	case REGULATOR_MODE_IDLE:
+		info->update_val = info->update_val_idle;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return ab8500_regulator_enable(rdev);
+}
+
+static unsigned int ab8500_regulator_get_mode(struct regulator_dev *rdev)
+{
+	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+	int ret;
+	u8 regval;
+
+	if (info == NULL) {
+		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
+		return -EINVAL;
+	}
+
+	ret = abx500_get_register_interruptible(info->dev,
+		info->update_bank, info->update_reg, &regval);
+	if (ret < 0) {
+		dev_err(rdev_get_dev(rdev),
+			"couldn't read 0x%x register\n", info->update_reg);
+		return ret;
+	}
+
+	regval &=info->update_mask;
+	if (regval == info->update_val_enable)
+		ret = REGULATOR_MODE_NORMAL;
+	else if (regval == info->update_val_idle)
+		ret = REGULATOR_MODE_IDLE;
+	else
+		ret = -EINVAL;
+
+	return ret;
+}
+
 static int ab8500_regulator_is_enabled(struct regulator_dev *rdev)
 {
 	int ret;
@@ -322,6 +383,8 @@ static int ab8500_regulator_set_voltage_time_sel(struct regulator_dev *rdev,
 static struct regulator_ops ab8500_regulator_ops = {
 	.enable		= ab8500_regulator_enable,
 	.disable	= ab8500_regulator_disable,
+	.set_mode	= ab8500_regulator_set_mode,
+	.get_mode	= ab8500_regulator_get_mode,
 	.is_enabled	= ab8500_regulator_is_enabled,
 	.get_voltage	= ab8500_regulator_get_voltage,
 	.set_voltage	= ab8500_regulator_set_voltage,
@@ -456,6 +519,8 @@ static struct ab8500_regulator_info
 		.update_bank		= 0x04,
 		.update_reg		= 0x09,
 		.update_mask		= 0x03,
+		.update_val		= 0x01,
+		.update_val_idle	= 0x03,
 		.update_val_enable	= 0x01,
 		.voltage_bank		= 0x04,
 		.voltage_reg		= 0x1f,
@@ -477,6 +542,8 @@ static struct ab8500_regulator_info
 		.update_bank		= 0x04,
 		.update_reg		= 0x09,
 		.update_mask		= 0x0c,
+		.update_val		= 0x04,
+		.update_val_idle	= 0x0c,
 		.update_val_enable	= 0x04,
 		.voltage_bank		= 0x04,
 		.voltage_reg		= 0x20,
@@ -498,6 +565,8 @@ static struct ab8500_regulator_info
 		.update_bank		= 0x04,
 		.update_reg		= 0x0a,
 		.update_mask		= 0x03,
+		.update_val		= 0x01,
+		.update_val_idle	= 0x03,
 		.update_val_enable	= 0x01,
 		.voltage_bank		= 0x04,
 		.voltage_reg		= 0x21,
@@ -519,6 +588,8 @@ static struct ab8500_regulator_info
 		.update_bank		= 0x03,
 		.update_reg		= 0x80,
 		.update_mask		= 0x44,
+		.update_val		= 0x04,
+		.update_val_idle	= 0x44,
 		.update_val_enable	= 0x04,
 		.voltage_bank		= 0x03,
 		.voltage_reg		= 0x80,