summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
authorBen Dooks <ben-linux@fluff.org>2009-05-13 21:46:15 +0100
committerBen Dooks <ben-linux@fluff.org>2009-05-17 22:21:26 +0100
commit9f05f6a921353f4293cda37f221b9bfa532d3c57 (patch)
treeea0a863a139765c5816260a07b3b1d2015f06d95 /arch
parentec7f4d5d67ef63c724ab6d4bdc7d2ffa8861071a (diff)
[ARM] S3C24XX: GPIO: Remove pin specific input and output defines
The use of S3C2410_GP[A-Z]x_INP and S3C2410_GP[A-Z]x_OUTP are very rare and are taking up large amounts of space in the regs-gpio.h header. The GPIO layer has had generic input and out defines called S3C2410_GPIO_INPUT and S3C2410_GPIO_OUTPUT for a while which work for all S3C24XX GPIOs. Do the following replacements: S3C2410_GP[A-Z][0-9]*_\OUTP => S3C2410_GPIO_OUTPUT S3C2410_GP[A-Z][0-9]*_\INP => /S3C2410_GPIO_INPUT S3C2410_GPA[0-9]*_OUT => S3C2410_GPIO_OUTPUT to remove any usages of these and prepare the header for the removal of these. The following command was used to acheive this: find . -type f -writable ! -name regs-gpio.h ! -name "*~" | xargs sed -i~ -e 's/S3C2410_GP[A-Z][0-9]*_\OUTP/S3C2410_GPIO_OUTPUT/g' -e 's/S3C2410_GP[A-Z][0-9]*_\INP/S3C2410_GPIO_INPUT/g' -e 's/S3C2410_GPA[0-9]*_OUT/S3C2410_GPIO_OUTPUT/g' Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/mach-s3c2410/h1940-bluetooth.c2
-rw-r--r--arch/arm/mach-s3c2410/mach-amlm5900.c2
-rw-r--r--arch/arm/mach-s3c2410/mach-bast.c2
-rw-r--r--arch/arm/mach-s3c2410/mach-vr1000.c2
-rw-r--r--arch/arm/mach-s3c2410/usb-simtec.c2
-rw-r--r--arch/arm/mach-s3c2440/mach-nexcoder.c8
-rw-r--r--arch/arm/mach-s3c2440/mach-osiris.c2
-rw-r--r--arch/arm/plat-s3c24xx/common-smdk.c8
8 files changed, 14 insertions, 14 deletions
diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c
index 5a6bc56f186..1f332b38f15 100644
--- a/arch/arm/mach-s3c2410/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c
@@ -89,7 +89,7 @@ static int __init h1940bt_probe(struct platform_device *pdev)
/* Configures BT serial port GPIOs */
s3c2410_gpio_cfgpin(S3C2410_GPH0, S3C2410_GPH0_nCTS0);
s3c2410_gpio_pullup(S3C2410_GPH0, 1);
- s3c2410_gpio_cfgpin(S3C2410_GPH1, S3C2410_GPH1_OUTP);
+ s3c2410_gpio_cfgpin(S3C2410_GPH1, S3C2410_GPIO_OUTPUT);
s3c2410_gpio_pullup(S3C2410_GPH1, 1);
s3c2410_gpio_cfgpin(S3C2410_GPH2, S3C2410_GPH2_TXD0);
s3c2410_gpio_pullup(S3C2410_GPH2, 1);
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index 6d6995afeb4..79428ed789b 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -224,7 +224,7 @@ static void amlm5900_init_pm(void)
} else {
enable_irq_wake(IRQ_EINT9);
/* configure the suspend/resume status pin */
- s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_OUTP);
+ s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPIO_OUTPUT);
s3c2410_gpio_pullup(S3C2410_GPF2, 0);
}
}
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 4389c160f7d..10ba91b7744 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -213,7 +213,7 @@ static int bast_pm_suspend(struct sys_device *sd, pm_message_t state)
{
/* ensure that an nRESET is not generated on resume. */
s3c2410_gpio_setpin(S3C2410_GPA21, 1);
- s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_OUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPIO_OUTPUT);
return 0;
}
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 61a1ea9c5c5..7e002f9473b 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -355,7 +355,7 @@ static struct clk *vr1000_clocks[] __initdata = {
static void vr1000_power_off(void)
{
- s3c2410_gpio_cfgpin(S3C2410_GPB9, S3C2410_GPB9_OUTP);
+ s3c2410_gpio_cfgpin(S3C2410_GPB9, S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(S3C2410_GPB9, 1);
}
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 8331e8d97e2..b209749b78e 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -109,7 +109,7 @@ int usb_simtec_init(void)
printk("USB Power Control, (c) 2004 Simtec Electronics\n");
s3c_device_usb.dev.platform_data = &usb_simtec_info;
- s3c2410_gpio_cfgpin(S3C2410_GPB4, S3C2410_GPB4_OUTP);
+ s3c2410_gpio_cfgpin(S3C2410_GPB4, S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(S3C2410_GPB4, 1);
return 0;
}
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index 7aeaa972d7f..3d4c61e1fa4 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -121,15 +121,15 @@ static void __init nexcoder_sensorboard_init(void)
{
// Initialize SCCB bus
s3c2410_gpio_setpin(S3C2410_GPE14, 1); // IICSCL
- s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPE14_OUTP);
+ s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(S3C2410_GPE15, 1); // IICSDA
- s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_OUTP);
+ s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPIO_OUTPUT);
// Power up the sensor board
s3c2410_gpio_setpin(S3C2410_GPF1, 1);
- s3c2410_gpio_cfgpin(S3C2410_GPF1, S3C2410_GPF1_OUTP); // CAM_GPIO7 => nLDO_PWRDN
+ s3c2410_gpio_cfgpin(S3C2410_GPF1, S3C2410_GPIO_OUTPUT); // CAM_GPIO7 => nLDO_PWRDN
s3c2410_gpio_setpin(S3C2410_GPF2, 0);
- s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_OUTP); // CAM_GPIO6 => CAM_PWRDN
+ s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPIO_OUTPUT); // CAM_GPIO6 => CAM_PWRDN
}
static void __init nexcoder_map_io(void)
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index c8a46685ce3..e05f9557ed5 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -292,7 +292,7 @@ static int osiris_pm_suspend(struct sys_device *sd, pm_message_t state)
/* ensure that an nRESET is not generated on resume. */
s3c2410_gpio_setpin(S3C2410_GPA21, 1);
- s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_OUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPIO_OUTPUT);
return 0;
}
diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c
index 1a8347cec20..ef4c8fde169 100644
--- a/arch/arm/plat-s3c24xx/common-smdk.c
+++ b/arch/arm/plat-s3c24xx/common-smdk.c
@@ -184,10 +184,10 @@ void __init smdk_machine_init(void)
{
/* Configure the LEDs (even if we have no LED support)*/
- s3c2410_gpio_cfgpin(S3C2410_GPF4, S3C2410_GPF4_OUTP);
- s3c2410_gpio_cfgpin(S3C2410_GPF5, S3C2410_GPF5_OUTP);
- s3c2410_gpio_cfgpin(S3C2410_GPF6, S3C2410_GPF6_OUTP);
- s3c2410_gpio_cfgpin(S3C2410_GPF7, S3C2410_GPF7_OUTP);
+ s3c2410_gpio_cfgpin(S3C2410_GPF4, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPF5, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPF6, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPF7, S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(S3C2410_GPF4, 1);
s3c2410_gpio_setpin(S3C2410_GPF5, 1);