Merge remote branch 'anholt/drm-intel-next' into drm-next

* anholt/drm-intel-next: (515 commits)
  drm/i915: Fix out of tree builds
  drm/i915: move fence lru to struct drm_i915_fence_reg
  drm/i915: don't allow tiling changes on pinned buffers v2
  drm/i915: Be extra careful about A/D matching for multifunction SDVO
  drm/i915: Fix DDC bus selection for multifunction SDVO
  drm/i915: cleanup mode setting before unmapping registers
  drm/i915: Make fbc control wrapper functions
  drm/i915: Wait for the GPU whilst shrinking, if truly desperate.
  drm/i915: Use spatio-temporal dithering on PCH
  [MTD] Remove zero-length files mtdbdi.c and internal.ho
  pata_pcmcia / ide-cs: Fix bad hashes for Transcend and kingston IDs
  libata: Fix several inaccuracies in developer's guide
  slub: Fix bad boundary check in init_kmem_cache_nodes()
  raid6: fix recovery performance regression
  KEYS: call_sbin_request_key() must write lock keyrings before modifying them
  KEYS: Use RCU dereference wrappers in keyring key type code
  KEYS: find_keyring_by_name() can gain access to a freed keyring
  ALSA: hda: Fix 0 dB for Packard Bell models using Conexant CX20549 (Venice)
  ALSA: hda - Add quirk for Dell Inspiron 19T using a Conexant CX20582
  ALSA: take tu->qlock with irqs disabled
  ...

1 files changed, 30 insertions, 56 deletions

diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index ca372abc36c..aba72c489a2 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -1504,16 +1504,17 @@ intel_analog_is_connected(struct drm_device *dev)
 }
 
 enum drm_connector_status
-intel_sdvo_hdmi_sink_detect(struct drm_connector *connector, u16 response)
+intel_sdvo_hdmi_sink_detect(struct drm_connector *connector)
 {
 	struct drm_encoder *encoder = intel_attached_encoder(connector);
 	struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
 	struct intel_sdvo_priv *sdvo_priv = intel_encoder->dev_priv;
+	struct intel_connector *intel_connector = to_intel_connector(connector);
+	struct intel_sdvo_connector *sdvo_connector = intel_connector->dev_priv;
 	enum drm_connector_status status = connector_status_connected;
 	struct edid *edid = NULL;
 
-	edid = drm_get_edid(connector,
-			    intel_encoder->ddc_bus);
+	edid = drm_get_edid(connector, intel_encoder->ddc_bus);
 
 	/* This is only applied to SDVO cards with multiple outputs */
 	if (edid == NULL && intel_sdvo_multifunc_encoder(intel_encoder)) {
@@ -1526,8 +1527,7 @@ intel_sdvo_hdmi_sink_detect(struct drm_connector *connector, u16 response)
 		 */
 		while(temp_ddc > 1) {
 			sdvo_priv->ddc_bus = temp_ddc;
-			edid = drm_get_edid(connector,
-				intel_encoder->ddc_bus);
+			edid = drm_get_edid(connector, intel_encoder->ddc_bus);
 			if (edid) {
 				/*
 				 * When we can get the EDID, maybe it is the
@@ -1544,28 +1544,25 @@ intel_sdvo_hdmi_sink_detect(struct drm_connector *connector, u16 response)
 	/* when there is no edid and no monitor is connected with VGA
 	 * port, try to use the CRT ddc to read the EDID for DVI-connector
 	 */
-	if (edid == NULL &&
-	    sdvo_priv->analog_ddc_bus &&
+	if (edid == NULL && sdvo_priv->analog_ddc_bus &&
 	    !intel_analog_is_connected(connector->dev))
-		edid = drm_get_edid(connector,
-				    sdvo_priv->analog_ddc_bus);
+		edid = drm_get_edid(connector, sdvo_priv->analog_ddc_bus);
+
 	if (edid != NULL) {
-		/* Don't report the output as connected if it's a DVI-I
-		 * connector with a non-digital EDID coming out.
-		 */
-		if (response & (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1)) {
-			if (edid->input & DRM_EDID_INPUT_DIGITAL)
-				sdvo_priv->is_hdmi =
-					drm_detect_hdmi_monitor(edid);
-			else
-				status = connector_status_disconnected;
-		}
+		bool is_digital = !!(edid->input & DRM_EDID_INPUT_DIGITAL);
+		bool need_digital = !!(sdvo_connector->output_flag & SDVO_TMDS_MASK);
 
-		kfree(edid);
-		connector->display_info.raw_edid = NULL;
+		/* DDC bus is shared, match EDID to connector type */
+		if (is_digital && need_digital)
+			sdvo_priv->is_hdmi = drm_detect_hdmi_monitor(edid);
+		else if (is_digital != need_digital)
+			status = connector_status_disconnected;
 
-	} else if (response & (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1))
+		connector->display_info.raw_edid = NULL;
+	} else
 		status = connector_status_disconnected;
+	
+	kfree(edid);
 
 	return status;
 }
@@ -1601,8 +1598,8 @@ static enum drm_connector_status intel_sdvo_detect(struct drm_connector *connect
 
 	if ((sdvo_connector->output_flag & response) == 0)
 		ret = connector_status_disconnected;
-	else if (response & (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1))
-		ret = intel_sdvo_hdmi_sink_detect(connector, response);
+	else if (response & SDVO_TMDS_MASK)
+		ret = intel_sdvo_hdmi_sink_detect(connector);
 	else
 		ret = connector_status_connected;
 
@@ -2054,40 +2051,17 @@ static const struct drm_encoder_funcs intel_sdvo_enc_funcs = {
  * outputs, then LVDS outputs.
  */
 static void
-intel_sdvo_select_ddc_bus(struct intel_sdvo_priv *dev_priv)
+intel_sdvo_select_ddc_bus(struct drm_i915_private *dev_priv,
+			  struct intel_sdvo_priv *sdvo, u32 reg)
 {
-	uint16_t mask = 0;
-	unsigned int num_bits;
+	struct sdvo_device_mapping *mapping;
 
-	/* Make a mask of outputs less than or equal to our own priority in the
-	 * list.
-	 */
-	switch (dev_priv->controlled_output) {
-	case SDVO_OUTPUT_LVDS1:
-		mask |= SDVO_OUTPUT_LVDS1;
-	case SDVO_OUTPUT_LVDS0:
-		mask |= SDVO_OUTPUT_LVDS0;
-	case SDVO_OUTPUT_TMDS1:
-		mask |= SDVO_OUTPUT_TMDS1;
-	case SDVO_OUTPUT_TMDS0:
-		mask |= SDVO_OUTPUT_TMDS0;
-	case SDVO_OUTPUT_RGB1:
-		mask |= SDVO_OUTPUT_RGB1;
-	case SDVO_OUTPUT_RGB0:
-		mask |= SDVO_OUTPUT_RGB0;
-		break;
-	}
-
-	/* Count bits to find what number we are in the priority list. */
-	mask &= dev_priv->caps.output_flags;
-	num_bits = hweight16(mask);
-	if (num_bits > 3) {
-		/* if more than 3 outputs, default to DDC bus 3 for now */
-		num_bits = 3;
-	}
+	if (IS_SDVOB(reg))
+		mapping = &(dev_priv->sdvo_mappings[0]);
+	else
+		mapping = &(dev_priv->sdvo_mappings[1]);
 
-	/* Corresponds to SDVO_CONTROL_BUS_DDCx */
-	dev_priv->ddc_bus = 1 << num_bits;
+	sdvo->ddc_bus = 1 << ((mapping->ddc_pin & 0xf0) >> 4);
 }
 
 static bool
@@ -2866,7 +2840,7 @@ bool intel_sdvo_init(struct drm_device *dev, int sdvo_reg)
 		goto err_i2c;
 	}
 
-	intel_sdvo_select_ddc_bus(sdvo_priv);
+	intel_sdvo_select_ddc_bus(dev_priv, sdvo_priv, sdvo_reg);
 
 	/* Set the input timing to the screen. Assume always input 0. */
 	intel_sdvo_set_target_input(intel_encoder, true, false);