Merge remote branch 'rmk/for-linus' into for-linus

* rmk/for-linus: (1557 commits)
  ARM: 6806/1: irq: introduce entry and exit functions for chained handlers
  ARM: 6781/1: Thumb-2: Work around buggy Thumb-2 short branch relocations in gas
  ARM: 6747/1: P2V: Thumb2 support
  ARM: 6798/1: aout-core: zero thread debug registers in a.out core dump
  ARM: 6796/1: Footbridge: Fix I/O mappings for NOMMU mode
  ARM: 6784/1: errata: no automatic Store Buffer drain on Cortex-A9
  ARM: 6772/1: errata: possible fault MMU translations following an ASID switch
  ARM: 6776/1: mach-ux500: activate fix for errata 753970
  ARM: 6794/1: SPEAr: Append UL to device address macros.
  ARM: 6793/1: SPEAr: Remove unused *_SIZE macros from spear*.h files
  ARM: 6792/1: SPEAr: Replace SIZE macro's with SZ_4K macros
  ARM: 6791/1: SPEAr3xx: Declare device structures after shirq code
  ARM: 6790/1: SPEAr: Clock Framework: Rename usbd clock and align apb_clk entry
  ARM: 6789/1: SPEAr3xx: Rename sdio to sdhci
  ARM: 6788/1: SPEAr: Include mach/hardware.h instead of mach/spear.h
  ARM: 6787/1: SPEAr: Reorder #includes in .h & .c files.
  ARM: 6681/1: SPEAr: add debugfs support to clk API
  ARM: 6703/1: SPEAr: update clk API support
  ARM: 6679/1: SPEAr: make clk API functions more generic
  ARM: 6737/1: SPEAr: formalized timer support
  ...

Conflicts:
	arch/arm/mach-msm/board-msm7x27.c
	arch/arm/mach-msm/board-msm7x30.c
	arch/arm/mach-msm/board-qsd8x50.c
	arch/arm/mach-msm/board-sapphire.c
	arch/arm/mach-msm/include/mach/memory.h

1 files changed, 44 insertions, 12 deletions

diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 1c18f26b081..2e5022849f1 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -937,6 +937,9 @@ static void e1000_print_hw_hang(struct work_struct *work)
 	u16 phy_status, phy_1000t_status, phy_ext_status;
 	u16 pci_status;
 
+	if (test_bit(__E1000_DOWN, &adapter->state))
+		return;
+
 	e1e_rphy(hw, PHY_STATUS, &phy_status);
 	e1e_rphy(hw, PHY_1000T_STATUS, &phy_1000t_status);
 	e1e_rphy(hw, PHY_EXT_STATUS, &phy_ext_status);
@@ -1506,6 +1509,9 @@ static void e1000e_downshift_workaround(struct work_struct *work)
 	struct e1000_adapter *adapter = container_of(work,
 					struct e1000_adapter, downshift_task);
 
+	if (test_bit(__E1000_DOWN, &adapter->state))
+		return;
+
 	e1000e_gig_downshift_workaround_ich8lan(&adapter->hw);
 }
 
@@ -3338,6 +3344,21 @@ int e1000e_up(struct e1000_adapter *adapter)
 	return 0;
 }
 
+static void e1000e_flush_descriptors(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+
+	if (!(adapter->flags2 & FLAG2_DMA_BURST))
+		return;
+
+	/* flush pending descriptor writebacks to memory */
+	ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD);
+	ew32(RDTR, adapter->rx_int_delay | E1000_RDTR_FPD);
+
+	/* execute the writes immediately */
+	e1e_flush();
+}
+
 void e1000e_down(struct e1000_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
@@ -3377,6 +3398,9 @@ void e1000e_down(struct e1000_adapter *adapter)
 
 	if (!pci_channel_offline(adapter->pdev))
 		e1000e_reset(adapter);
+
+	e1000e_flush_descriptors(adapter);
+
 	e1000_clean_tx_ring(adapter);
 	e1000_clean_rx_ring(adapter);
 
@@ -3765,6 +3789,10 @@ static void e1000e_update_phy_task(struct work_struct *work)
 {
 	struct e1000_adapter *adapter = container_of(work,
 					struct e1000_adapter, update_phy_task);
+
+	if (test_bit(__E1000_DOWN, &adapter->state))
+		return;
+
 	e1000_get_phy_info(&adapter->hw);
 }
 
@@ -3775,6 +3803,10 @@ static void e1000e_update_phy_task(struct work_struct *work)
 static void e1000_update_phy_info(unsigned long data)
 {
 	struct e1000_adapter *adapter = (struct e1000_adapter *) data;
+
+	if (test_bit(__E1000_DOWN, &adapter->state))
+		return;
+
 	schedule_work(&adapter->update_phy_task);
 }
 
@@ -4149,6 +4181,9 @@ static void e1000_watchdog_task(struct work_struct *work)
 	u32 link, tctl;
 	int tx_pending = 0;
 
+	if (test_bit(__E1000_DOWN, &adapter->state))
+		return;
+
 	link = e1000e_has_link(adapter);
 	if ((netif_carrier_ok(netdev)) && link) {
 		/* Cancel scheduled suspend requests. */
@@ -4309,7 +4344,6 @@ link_up:
 			 * to get done, so reset controller to flush Tx.
 			 * (Do the reset outside of interrupt context).
 			 */
-			adapter->tx_timeout_count++;
 			schedule_work(&adapter->reset_task);
 			/* return immediately since reset is imminent */
 			return;
@@ -4338,19 +4372,12 @@ link_up:
 	else
 		ew32(ICS, E1000_ICS_RXDMT0);
 
+	/* flush pending descriptors to memory before detecting Tx hang */
+	e1000e_flush_descriptors(adapter);
+
 	/* Force detection of hung controller every watchdog period */
 	adapter->detect_tx_hung = 1;
 
-	/* flush partial descriptors to memory before detecting Tx hang */
-	if (adapter->flags2 & FLAG2_DMA_BURST) {
-		ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD);
-		ew32(RDTR, adapter->rx_int_delay | E1000_RDTR_FPD);
-		/*
-		 * no need to flush the writes because the timeout code does
-		 * an er32 first thing
-		 */
-	}
-
 	/*
 	 * With 82571 controllers, LAA may be overwritten due to controller
 	 * reset from the other port. Set the appropriate LAA in RAR[0]
@@ -4888,6 +4915,10 @@ static void e1000_reset_task(struct work_struct *work)
 	struct e1000_adapter *adapter;
 	adapter = container_of(work, struct e1000_adapter, reset_task);
 
+	/* don't run the task if already down */
+	if (test_bit(__E1000_DOWN, &adapter->state))
+		return;
+
 	if (!((adapter->flags & FLAG_RX_NEEDS_RESTART) &&
 	      (adapter->flags & FLAG_RX_RESTART_NOW))) {
 		e1000e_dump(adapter);
@@ -5936,7 +5967,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 		/* APME bit in EEPROM is mapped to WUC.APME */
 		eeprom_data = er32(WUC);
 		eeprom_apme_mask = E1000_WUC_APME;
-		if (eeprom_data & E1000_WUC_PHY_WAKE)
+		if ((hw->mac.type > e1000_ich10lan) &&
+		    (eeprom_data & E1000_WUC_PHY_WAKE))
 			adapter->flags2 |= FLAG2_HAS_PHY_WAKEUP;
 	} else if (adapter->flags & FLAG_APME_IN_CTRL3) {
 		if (adapter->flags & FLAG_APME_CHECK_PORT_B &&