[SPARC]: Remove the broken SUN_AURORA driver.

The SUN_AURORA driver:
- has been marked as BROKEN for more than two years and
- is still marked as BROKEN.

Drivers that had been marked as BROKEN for such a long time seem to be
unlikely to be revived in the forseeable future.

But if anyone wants to ever revive this driver, the code is still
present in the older kernel releases.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 0 insertions, 276 deletions

diff --git a/drivers/sbus/char/aurora.h b/drivers/sbus/char/aurora.h
deleted file mode 100644
index b8b5476d986..00000000000
--- a/drivers/sbus/char/aurora.h
+++ /dev/null
@@ -1,276 +0,0 @@
-/*	$Id: aurora.h,v 1.6 2001/06/05 12:23:38 davem Exp $
- *	linux/drivers/sbus/char/aurora.h -- Aurora multiport driver
- *
- *	Copyright (c) 1999 by Oliver Aldulea (oli@bv.ro)
- *
- *	This code is based on the RISCom/8 multiport serial driver written
- *	by Dmitry Gorodchanin (pgmdsg@ibi.com), based on the Linux serial
- *	driver, written by Linus Torvalds, Theodore T'so and others.
- *	The Aurora multiport programming info was obtained mainly from the
- *	Cirrus Logic CD180 documentation (available on the web), and by
- *	doing heavy tests on the board. Many thanks to Eddie C. Dost for the
- *	help on the sbus interface.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	This program is distributed in the hope that it will be useful,
- *	but WITHOUT ANY WARRANTY; without even the implied warranty of
- *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *	GNU General Public License for more details.
- *
- *	You should have received a copy of the GNU General Public License
- *	along with this program; if not, write to the Free Software
- *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *	Revision 1.0
- *
- *	This is the first public release.
- *
- *	This version needs a lot of feedback. This is the version that works
- *	with _my_ board. My board is model 1600se, revision '@(#)1600se.fth
- *	1.2 3/28/95 1'. The driver might work with your board, but I do not
- *	guarantee it. If you have _any_ type of board, I need to know if the
- *	driver works or not, I need to know exactly your board parameters
- *	(get them with 'cd /proc/openprom/iommu/sbus/sio16/; ls *; cat *')
- *	Also, I need your board revision code, which is written on the board.
- *	Send me the output of my driver too (it outputs through klogd).
- *
- *	If the driver does not work, you can try enabling the debug options
- *	to see what's wrong or what should be done.
- *
- *	I'm sorry about the alignment of the code. It was written in a
- *	128x48 environment.
- *
- *	I must say that I do not like Aurora Technologies' policy. I asked
- *	them to help me do this driver faster, but they ended by something
- *	like "don't call us, we'll call you", and I never heard anything
- *	from them. They told me "knowing the way the board works, I don't
- *	doubt you and others on the net will make the driver."
- *	The truth about this board is that it has nothing intelligent on it.
- *	If you want to say to somebody what kind of board you have, say that
- *	it uses Cirrus Logic processors (CD180). The power of the board is
- *	in those two chips. The rest of the board is the interface to the
- *	sbus and to the peripherals. Still, they did something smart: they
- *	reversed DTR and RTS to make on-board automatic hardware flow
- *	control usable.
- *	Thanks to Aurora Technologies for wasting my time, nerves and money.
- */
-
-#ifndef __LINUX_AURORA_H
-#define __LINUX_AURORA_H
-
-#include <linux/serial.h>
-#include <linux/serialP.h>
-
-#ifdef __KERNEL__
-
-/* This is the number of boards to support. I've only tested this driver with
- * one board, so it might not work.
- */
-#define AURORA_NBOARD 1
-
-/* Useful ? Yes. But you can safely comment the warnings if they annoy you
- * (let me say that again: the warnings in the code, not this define). 
- */
-#define AURORA_PARANOIA_CHECK
-
-/* Well, after many lost nights, I found that the IRQ for this board is
- * selected from four built-in values by writing some bits in the
- * configuration register. This causes a little problem to occur: which
- * IRQ to select ? Which one is the best for the user ? Well, I finally
- * decided for the following algorithm: if the "bintr" value is not acceptable
- * (not within type_1_irq[], then test the "intr" value, if that fails too,
- * try each value from type_1_irq until succeded. Hope it's ok.
- * You can safely reorder the irq's.
- */
-#define TYPE_1_IRQS 4
-unsigned char type_1_irq[TYPE_1_IRQS] = {
-	3, 5, 9, 13
-};
-/* I know something about another method of interrupt setting, but not enough.
- * Also, this is for another type of board, so I first have to learn how to
- * detect it.
-#define TYPE_2_IRQS 3
-unsigned char type_2_irq[TYPE_2_IRQS] = {
-	0, 0, 0 ** could anyone find these for me ? (see AURORA_ALLIRQ below) **
-	};
-unsigned char type_2_mask[TYPE_2_IRQS] = {
-	32, 64, 128
-	};
-*/
-
-/* The following section should only be modified by those who know what
- * they're doing (or don't, but want to help with some feedback). Modifying
- * anything raises a _big_ probability for your system to hang, but the
- * sacrifice worths. (I sacrificed my ext2fs many, many times...)
- */
-
-/* This one tries to dump to console the name of almost every function called,
- * and many other debugging info.
- */
-#undef AURORA_DEBUG
-
-/* These are the most dangerous and useful defines. They do printk() during
- * the interrupt processing routine(s), so if you manage to get "flooded" by
- * irq's, start thinking about the "Power off/on" button...
- */
-#undef AURORA_INTNORM	/* This one enables the "normal" messages, but some
-			 * of them cause flood, so I preffered putting
-			 * them under a define */
-#undef AURORA_INT_DEBUG /* This one is really bad. */
-
-/* Here's something helpful: after n irq's, the board will be disabled. This
- * prevents irq flooding during debug (no need to think about power
- * off/on anymore...)
- */
-#define AURORA_FLOODPRO	10
-
-/* This one helps finding which irq the board calls, in case of a strange/
- * unsupported board. AURORA_INT_DEBUG should be enabled, because I don't
- * think /proc/interrupts or any command will be available in case of an irq
- * flood... "allirq" is the list of all free irq's.
- */
-/*
-#define AURORA_ALLIRQ 6
-int allirq[AURORA_ALLIRQ]={
-	2,3,5,7,9,13
-	};
-*/
-
-/* These must not be modified. These values are assumed during the code for
- * performance optimisations.
- */
-#define AURORA_NCD180 2 /* two chips per board */
-#define AURORA_NPORT 8  /* 8 ports per chip */
-
-/* several utilities */
-#define AURORA_BOARD(line)	(((line) >> 4) & 0x01)
-#define AURORA_CD180(line)	(((line) >> 3) & 0x01)
-#define AURORA_PORT(line)	((line) & 15)
-
-#define AURORA_TNPORTS (AURORA_NBOARD*AURORA_NCD180*AURORA_NPORT)
-
-/* Ticks per sec. Used for setting receiver timeout and break length */
-#define AURORA_TPS		4000
-
-#define AURORA_MAGIC	0x0A18
-
-/* Yeah, after heavy testing I decided it must be 6.
- * Sure, You can change it if needed.
- */
-#define AURORA_RXFIFO		6	/* Max. receiver FIFO size (1-8) */
-
-#define AURORA_RXTH		7
-
-struct aurora_reg1 {
-	__volatile__ unsigned char r;
-};
-
-struct aurora_reg128 {
-	__volatile__ unsigned char r[128];
-};
-	
-struct aurora_reg4 {
-	__volatile__ unsigned char r[4];
-};
-
-struct Aurora_board {
-	unsigned long		flags;
-	struct aurora_reg1	* r0;	/* This is the board configuration
-					 * register (write-only). */
-	struct aurora_reg128	* r[2];	/* These are the registers for the
-					 * two chips. */
-	struct aurora_reg4	* r3;	/* These are used for hardware-based
-					 * acknowledge. Software-based ack is
-					 * not supported by CD180. */
-	unsigned int		oscfreq; /* The on-board oscillator
-					  * frequency, in Hz. */
-	unsigned char		irq;
-#ifdef MODULE
-	signed char		count;	/* counts the use of the board */
-#endif
-	/* Values for the dtr_rts swapped mode. */
-	unsigned char		DTR;
-	unsigned char		RTS;
-	unsigned char		MSVDTR;
-	unsigned char		MSVRTS;
-	/* Values for hardware acknowledge. */
-	unsigned char		ACK_MINT, ACK_TINT, ACK_RINT;
-};
-
-/* Board configuration register */
-#define AURORA_CFG_ENABLE_IO	8
-#define AURORA_CFG_ENABLE_IRQ	4
-
-/* Board flags */
-#define AURORA_BOARD_PRESENT		0x00000001
-#define AURORA_BOARD_ACTIVE		0x00000002
-#define AURORA_BOARD_TYPE_2		0x00000004	/* don't know how to
-							 * detect this yet */
-#define AURORA_BOARD_DTR_FLOW_OK	0x00000008
-
-/* The story goes like this: Cirrus programmed the CD-180 chip to do automatic
- * hardware flow control, and do it using CTS and DTR. CTS is ok, but, if you
- * have a modem and the chip drops DTR, then the modem will drop the carrier
- * (ain't that cute...). Luckily, the guys at Aurora decided to swap DTR and
- * RTS, which makes the flow control usable. I hope that all the boards made
- * by Aurora have these two signals swapped. If your's doesn't but you have a
- * breakout box, you can try to reverse them yourself, then set the following
- * flag.
- */
-#undef AURORA_FORCE_DTR_FLOW
-
-/* In fact, a few more words have to be said about hardware flow control.
- * This driver handles "output" flow control through the on-board facility
- * CTS Auto Enable. For the "input" flow control there are two cases when
- * the flow should be controlled. The first case is when the kernel is so
- * busy that it cannot process IRQ's in time; this flow control can only be
- * activated by the on-board chip, and if the board has RTS and DTR swapped,
- * this facility is usable. The second case is when the application is so
- * busy that it cannot receive bytes from the kernel, and this flow must be
- * activated by software. This second case is not yet implemented in this
- * driver. Unfortunately, I estimate that the second case is the one that
- * occurs the most.
- */
-
-
-struct Aurora_port {
-	int			magic;
-	int			baud_base;
-	int			flags;
-	struct tty_struct 	* tty;
-	int			count;
-	int			blocked_open;
-	long			event;
-	int			timeout;
-	int			close_delay;
-	unsigned char 		* xmit_buf;
-	int			custom_divisor;
-	int			xmit_head;
-	int			xmit_tail;
-	int			xmit_cnt;
-	wait_queue_head_t	open_wait;
-	wait_queue_head_t	close_wait;
-	struct tq_struct	tqueue;
-	struct tq_struct	tqueue_hangup;
-	short			wakeup_chars;
-	short			break_length;
-	unsigned short		closing_wait;
-	unsigned char		mark_mask;
-	unsigned char		SRER;
-	unsigned char		MSVR;
-	unsigned char		COR2;
-#ifdef AURORA_REPORT_OVERRUN
-	unsigned long		overrun;
-#endif	
-#ifdef AURORA_REPORT_FIFO
-	unsigned long		hits[10];
-#endif
-};
-
-#endif
-#endif /*__LINUX_AURORA_H*/
-