diff options
| author | David Daney <ddaney@caviumnetworks.com> | 2010-10-08 14:47:52 -0700 |
|---|---|---|
| committer | Ralf Baechle <ralf@linux-mips.org> | 2010-10-29 19:08:44 +0100 |
| commit | 1643accdaad4625c2877f7ceefa39c1cb3e90117 (patch) | |
| tree | e3dcc5b371c89591e1d90f80bd82727b8e0fd245 /drivers/usb/host/Kconfig | |
| parent | 4169b86324fbefdf137a0bd69154d0e874f2bec2 (diff) | |
USB: Add EHCI and OHCH glue for OCTEON II SOCs.
The OCTEON II SOC has USB EHCI and OHCI controllers connected directly
to the internal I/O bus. This patch adds the necessary 'glue' logic
to allow ehci-hcd and ohci-hcd drivers to work on OCTEON II.
The OCTEON normally runs big-endian, and the ehci/ohci internal
registers have host endianness, so we need to select
USB_EHCI_BIG_ENDIAN_MMIO.
The ehci and ohci blocks share a common clocking and PHY
infrastructure. Initialization of the host controller and PHY clocks
is common between the two and is factored out into the
octeon2-common.c file.
Setting of USB_ARCH_HAS_OHCI and USB_ARCH_HAS_EHCI is done in
arch/mips/Kconfig in a following patch.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-usb@vger.kernel.org
To: dbrownell@users.sourceforge.net
Patchwork: http://patchwork.linux-mips.org/patch/1675/
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'drivers/usb/host/Kconfig')
| -rw-r--r-- | drivers/usb/host/Kconfig | 30 |
1 files changed, 28 insertions, 2 deletions
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index bf2e7d23453..2391c396ca3 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -93,8 +93,9 @@ config USB_EHCI_TT_NEWSCHED config USB_EHCI_BIG_ENDIAN_MMIO bool - depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || ARCH_IXP4XX || \ - XPS_USB_HCD_XILINX || PPC_MPC512x) + depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || \ + ARCH_IXP4XX || XPS_USB_HCD_XILINX || \ + PPC_MPC512x || CPU_CAVIUM_OCTEON) default y config USB_EHCI_BIG_ENDIAN_DESC @@ -434,3 +435,28 @@ config USB_IMX21_HCD To compile this driver as a module, choose M here: the module will be called "imx21-hcd". +config USB_OCTEON_EHCI + bool "Octeon on-chip EHCI support" + depends on USB && USB_EHCI_HCD && CPU_CAVIUM_OCTEON + default n + select USB_EHCI_BIG_ENDIAN_MMIO + help + Enable support for the Octeon II SOC's on-chip EHCI + controller. It is needed for high-speed (480Mbit/sec) + USB 2.0 device support. All CN6XXX based chips with USB are + supported. + +config USB_OCTEON_OHCI + bool "Octeon on-chip OHCI support" + depends on USB && USB_OHCI_HCD && CPU_CAVIUM_OCTEON + default USB_OCTEON_EHCI + select USB_OHCI_BIG_ENDIAN_MMIO + select USB_OHCI_LITTLE_ENDIAN + help + Enable support for the Octeon II SOC's on-chip OHCI + controller. It is needed for low-speed USB 1.0 device + support. All CN6XXX based chips with USB are supported. + +config USB_OCTEON2_COMMON + bool + default y if USB_OCTEON_EHCI || USB_OCTEON_OHCI |