USB: Add support for USB OTG 2.0

OTG 2.0 support is provided in Kernel 3.0.
Srp related modifications are done in ab8500-usb.

ST-Ericsson ID: 401192
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: STETL-FOSS-OUT-10054

Change-Id: I1bf52c8d6f6c4b0bedf5e51004dc72bf52a68020
Signed-off-by: Avinash Kumar <avinash.kumar@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/49006
Reviewed-by: QATOOLS
Reviewed-by: Praveena NADAHALLY <praveen.nadahally@stericsson.com>

Conflicts:

	drivers/usb/otg/ab8500-usb.c

9 files changed, 208 insertions, 33 deletions

diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index b3948206024..7ce5080df46 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -1306,6 +1306,7 @@ void usb_hnp_polling_work(struct work_struct *work)
 	if (ret < 0) {
 		/* Peripheral may not be supporting HNP polling */
 		dev_vdbg(&udev->dev, "HNP polling failed. status %d\n", ret);
+		ret = usb_suspend_both(udev, PMSG_USER_SUSPEND);
 		goto out;
 	}
 
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index f4038c53b61..f78df1d3163 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -639,7 +639,7 @@ static int hub_hub_status(struct usb_hub *hub,
 			"%s failed (err = %d)\n", __func__, ret);
 	else {
 		*status = le16_to_cpu(hub->status->hub.wHubStatus);
-		*change = le16_to_cpu(hub->status->hub.wHubChange); 
+		*change = le16_to_cpu(hub->status->hub.wHubChange);
 		ret = 0;
 	}
 	mutex_unlock(&hub->status_mutex);
@@ -1693,7 +1693,7 @@ void usb_disconnect(struct usb_device **pdev)
 	dev_info(&udev->dev, "USB disconnect, device number %d\n",
 			udev->devnum);
 
-#ifdef CONFIG_USB_OTG
+#ifdef CONFIG_USB_OTG_20
 	if (udev->bus->hnp_support && udev->portnum == udev->bus->otg_port) {
 		cancel_delayed_work_sync(&udev->bus->hnp_polling);
 		udev->bus->hnp_support = 0;
@@ -1775,11 +1775,13 @@ static inline void announce_device(struct usb_device *udev) { }
  *
  * Finish enumeration for On-The-Go devices
  */
+
+#ifdef	CONFIG_USB_OTG_20
+
 static int usb_enumerate_device_otg(struct usb_device *udev)
 {
 	int err = 0;
 
-#ifdef	CONFIG_USB_OTG
 	/*
 	 * OTG-aware devices on OTG-capable root hubs may be able to use SRP,
 	 * to wake us after we've powered off VBUS; and HNP, switching roles
@@ -1803,6 +1805,10 @@ static int usb_enumerate_device_otg(struct usb_device *udev)
 					(port1 == bus->otg_port)
 						? "" : "non-");
 
+				if (port1 != bus->otg_port)
+					goto out;
+				bus->hnp_support = 1;
+
 				err = usb_control_msg(udev,
 					usb_sndctrlpipe(udev, 0),
 					USB_REQ_SET_FEATURE, 0,
@@ -1832,8 +1838,6 @@ out:
 			if (err < 0)
 				dev_dbg(&udev->dev, "HNP fail, %d\n", err);
 		}
-		err = -ENOTSUPP;
-		goto fail;
 	} else if (udev->bus->hnp_support &&
 			udev->portnum == udev->bus->otg_port) {
 		/* HNP polling is introduced in OTG supplement Rev 2.0
@@ -1845,10 +1849,82 @@ out:
 			msecs_to_jiffies(THOST_REQ_POLL));
 	}
 fail:
+
+	return err;
+}
+
+#else
+
+static int usb_enumerate_device_otg(struct usb_device *udev)
+{
+	int err = 0;
+
+#ifdef	CONFIG_USB_OTG
+	/*
+	 * OTG-aware devices on OTG-capable root hubs may be able to use SRP,
+	 * to wake us after we've powered off VBUS; and HNP, switching roles
+	 * "host" to "peripheral".  The OTG descriptor helps figure this out.
+	 */
+	if (!udev->bus->is_b_host
+			&& udev->config
+			&& udev->parent == udev->bus->root_hub) {
+		struct usb_otg_descriptor	*desc = NULL;
+		struct usb_bus			*bus = udev->bus;
+
+		/* descriptor may appear anywhere in config */
+		if (__usb_get_extra_descriptor(udev->rawdescriptors[0],
+				le16_to_cpu(udev->config[0].desc.wTotalLength),
+					USB_DT_OTG, (void **) &desc) == 0) {
+			if (desc->bmAttributes & USB_OTG_HNP) {
+				unsigned		port1 = udev->portnum;
+
+				dev_info(&udev->dev,
+					"Dual-Role OTG device on %sHNP port\n",
+					(port1 == bus->otg_port)
+						? "" : "non-");
+
+				/* enable HNP before suspend, it's simpler */
+				if (port1 == bus->otg_port)
+					bus->b_hnp_enable = 1;
+				err = usb_control_msg(udev,
+					usb_sndctrlpipe(udev, 0),
+					USB_REQ_SET_FEATURE, 0,
+					bus->b_hnp_enable
+						? USB_DEVICE_B_HNP_ENABLE
+						: USB_DEVICE_A_ALT_HNP_SUPPORT,
+					0, NULL, 0, USB_CTRL_SET_TIMEOUT);
+				if (err < 0) {
+					/* OTG MESSAGE: report errors here,
+					 * customize to match your product.
+					 */
+					dev_info(&udev->dev,
+						"can't set HNP mode: %d\n",
+						err);
+					bus->b_hnp_enable = 0;
+				}
+			}
+		}
+	}
+
+	if (!is_targeted(udev)) {
+
+		/* Maybe it can talk to us, though we can't talk to it.
+		 * (Includes HNP test device.)
+		 */
+		if (udev->bus->b_hnp_enable || udev->bus->is_b_host) {
+			err = usb_port_suspend(udev, PMSG_SUSPEND);
+			if (err < 0)
+				dev_dbg(&udev->dev, "HNP fail, %d\n", err);
+		}
+		err = -ENOTSUPP;
+		goto fail;
+	}
+fail:
 #endif
 	return err;
 }
 
+#endif
 
 /**
  * usb_enumerate_device - Read device configs/intfs/otg (usbcore-internal)
@@ -2508,7 +2584,7 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
 	if (udev->usb2_hw_lpm_enabled == 1)
 		usb_set_usb2_hardware_lpm(udev, 0);
 
-#ifdef CONFIG_USB_OTG
+#ifdef CONFIG_USB_OTG_20
 	if (!udev->bus->is_b_host && udev->bus->hnp_support &&
 		udev->portnum == udev->bus->otg_port) {
 		status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
@@ -2522,6 +2598,7 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
 			udev->bus->b_hnp_enable = 1;
 		}
 #endif
+
 	/* see 7.1.7.6 */
 	if (hub_is_superspeed(hub->hdev))
 		status = set_port_feature(hub->hdev,
@@ -2676,7 +2753,7 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
 	int		status;
 	u16		portchange, portstatus;
 
-#ifdef CONFIG_USB_OTG
+#ifdef CONFIG_USB_OTG_20
 		if (!udev->bus->is_b_host && udev->bus->hnp_support &&
 					udev->portnum == udev->bus->otg_port)
 			udev->bus->b_hnp_enable = 0;
@@ -2885,7 +2962,7 @@ EXPORT_SYMBOL_GPL(usb_root_hub_lost_power);
  * Between connect detection and reset signaling there must be a delay
  * of 100ms at least for debounce and power-settling.  The corresponding
  * timer shall restart whenever the downstream port detects a disconnect.
- * 
+ *
  * Apparently there are some bluetooth and irda-dongles and a number of
  * low-speed devices for which this debounce period may last over a second.
  * Not covered by the spec - but easy to deal with.
@@ -3083,7 +3160,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 		udev->tt = &hub->tt;
 		udev->ttport = port1;
 	}
- 
+
 	/* Why interleave GET_DESCRIPTOR and SET_ADDRESS this way?
 	 * Because device hardware and firmware is sometimes buggy in
 	 * this area, and this is how Linux has done it for ages.
@@ -3243,7 +3320,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 		udev->ep0.desc.wMaxPacketSize = cpu_to_le16(i);
 		usb_ep0_reinit(udev);
 	}
-  
+
 	retval = usb_get_device_descriptor(udev, USB_DT_DEVICE_SIZE);
 	if (retval < (signed)sizeof(udev->descriptor)) {
 		dev_err(&udev->dev, "device descriptor read/all, error %d\n",
@@ -3528,7 +3605,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 				goto loop_disable;
 			}
 		}
- 
+
 		/* check for devices running slower than they could */
 		if (le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0200
 				&& udev->speed == USB_SPEED_FULL
@@ -3570,6 +3647,20 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 			dev_dbg(hub_dev, "%dmA power budget left\n", status);
 
 #ifdef CONFIG_USB_OTG_20
+		struct usb_otg_descriptor	*desc = NULL;
+		int ret;
+		/* descriptor may appear anywhere in config */
+		__usb_get_extra_descriptor(udev->rawdescriptors[0],
+				le16_to_cpu(udev->config[0].desc.wTotalLength),
+				USB_DT_OTG, (void **) &desc);
+
+		ret = usb_control_msg(udev,
+			usb_sndctrlpipe(udev, 0),
+			USB_REQ_SET_FEATURE, 0,
+				USB_DEVICE_B_HNP_ENABLE,
+			0, NULL, 0, USB_CTRL_SET_TIMEOUT);
+		if (ret < 0)
+			dev_dbg(hub_dev, "set feature error\n");
 
 		u16 idVendor = le16_to_cpu(udev->descriptor.idVendor);
 		if (idVendor == USB_OTG_TEST_MODE_VID) {
@@ -3651,8 +3742,8 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 				break;
 			default:
 			/* is_targeted() will take care for wrong PID */
-				dev_dbg(&udev->dev, "OTG TEST_MODE:Wrong
-							PID %d\n" idProduct);
+				dev_dbg(&udev->dev, "OTG TEST_MODE:Wrong"
+							"PID %d\n", idProduct);
 				break;
 			}
 
@@ -3681,7 +3772,7 @@ loop:
 			!(hcd->driver->port_handed_over)(hcd, port1))
 		dev_err(hub_dev, "unable to enumerate USB device on port %d\n",
 				port1);
- 
+
 done:
 	hub_port_disable(hub, port1, 1);
 	if (hcd->driver->relinquish_port && !hub->hdev->parent)
@@ -3848,7 +3939,7 @@ static void hub_events(void)
 				 * EM interference sometimes causes badly
 				 * shielded USB devices to be shutdown by
 				 * the hub, this hack enables them again.
-				 * Works at least with mouse driver. 
+				 * Works at least with mouse driver.
 				 */
 				if (!(portstatus & USB_PORT_STAT_ENABLE)
 				    && !connect_change
@@ -4188,7 +4279,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
 
 	if (ret < 0)
 		goto re_enumerate;
- 
+
 	/* Device might have changed firmware (DFU or similar) */
 	if (descriptors_changed(udev, &descriptor)) {
 		dev_info(&udev->dev, "device firmware changed\n");
@@ -4221,6 +4312,16 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
 		goto re_enumerate;
   	}
 	mutex_unlock(hcd->bandwidth_mutex);
+
+#ifdef CONFIG_USB_OTG_20
+	ret = usb_control_msg(udev,
+		usb_sndctrlpipe(udev, 0),
+		USB_REQ_SET_FEATURE, 0,
+			USB_DEVICE_A_HNP_SUPPORT,
+		0, NULL, 0, USB_CTRL_SET_TIMEOUT);
+	if (ret < 0)
+		dev_err(&udev->dev, "set feature error\n");
+#endif
 	usb_set_device_state(udev, USB_STATE_CONFIGURED);
 
 	/* Put interfaces back into the same altsettings as before.
@@ -4261,7 +4362,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
 
 done:
 	return 0;
- 
+
 re_enumerate:
 	hub_port_logical_disconnect(parent_hub, port1);
 	return -ENODEV;
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 840afb3b8a0..1ab2fd8c3e9 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -714,6 +714,9 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 b_host:
 			musb->xceiv->state = OTG_STATE_B_HOST;
 			hcd->self.is_b_host = 1;
+#ifdef CONFIG_USB_OTG_20
+			musb->g.otg_hnp_reqd = 0;
+#endif
 			musb->ignore_disconnect = 0;
 			del_timer(&musb->otg_timer);
 			break;
@@ -1748,7 +1751,9 @@ musb_srp_store(struct device *dev, struct device_attribute *attr,
 {
 	struct musb	*musb = dev_to_musb(dev);
 	unsigned short	srp;
-
+#ifdef CONFIG_USB_OTG_20
+	musb->xceiv->start_srp(musb->xceiv);
+#endif
 	if (sscanf(buf, "%hu", &srp) != 1
 			|| (srp != 1)) {
 		dev_err(dev, "SRP: Value must be 1\n");
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index f7a37fa1bfe..2d52530d3e4 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -153,7 +153,10 @@ enum musb_g_ep0_state {
 #define OTG_TIME_A_WAIT_BCON	1100		/* min 1 second */
 #define OTG_TIME_A_AIDL_BDIS	200		/* min 200 msec */
 #define OTG_TIME_B_ASE0_BRST	100		/* min 3.125 ms */
-
+#ifdef CONFIG_USB_OTG_20
+#define USB_SUSP_DET_DURATION	5		/* suspend time 5ms */
+#define TTST_SRP		3000			/* max 5 sec */
+#endif
 
 /*************************** REGISTER ACCESS ********************************/
 
@@ -432,7 +435,6 @@ struct musb {
 	unsigned		set_address:1;
 	unsigned		test_mode:1;
 	unsigned		softconnect:1;
-
 	u8			address;
 	u8			test_mode_nr;
 	u16			ackpend;		/* ep0 */
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 461b5f2d889..b2abef69dc3 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1662,7 +1662,9 @@ static int musb_gadget_wakeup(struct usb_gadget *gadget)
 		}
 
 		spin_unlock_irqrestore(&musb->lock, flags);
+#ifndef CONFIG_USB_OTG_20
 		otg_start_srp(musb->xceiv->otg);
+#endif
 		spin_lock_irqsave(&musb->lock, flags);
 
 		/* Block idling for at least 1s */
diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c
index e40d7647caf..631aab86240 100644
--- a/drivers/usb/musb/musb_gadget_ep0.c
+++ b/drivers/usb/musb/musb_gadget_ep0.c
@@ -45,6 +45,11 @@
 /* ep0 is always musb->endpoints[0].ep_in */
 #define	next_ep0_request(musb)	next_in_request(&(musb)->endpoints[0])
 
+/* OTG 2.0 Specification 6.2.3 GetStatus commands */
+#ifdef CONFIG_USB_OTG_20
+#define OTG_STATUS_SELECT 0xF
+#endif
+
 /*
  * locking note:  we use only the controller lock, for simpler correctness.
  * It's always held with IRQs blocked.
@@ -80,21 +85,33 @@ static int service_tx_status_request(
 	int handled = 1;
 	u8 result[2], epnum = 0;
 	const u8 recip = ctrlrequest->bRequestType & USB_RECIP_MASK;
-
+#ifdef CONFIG_USB_OTG_20
+	unsigned int otg_recip = ctrlrequest->wIndex >> 12;
+#endif
 	result[1] = 0;
 
 	switch (recip) {
 	case USB_RECIP_DEVICE:
-		result[0] = musb->is_self_powered << USB_DEVICE_SELF_POWERED;
-		result[0] |= musb->may_wakeup << USB_DEVICE_REMOTE_WAKEUP;
-		if (musb->g.is_otg) {
-			result[0] |= musb->g.b_hnp_enable
-				<< USB_DEVICE_B_HNP_ENABLE;
-			result[0] |= musb->g.a_alt_hnp_support
-				<< USB_DEVICE_A_ALT_HNP_SUPPORT;
-			result[0] |= musb->g.a_hnp_support
-				<< USB_DEVICE_A_HNP_SUPPORT;
+#ifdef CONFIG_USB_OTG_20
+		if (!(otg_recip == OTG_STATUS_SELECT)) {
+#endif
+			result[0] = musb->is_self_powered <<
+						USB_DEVICE_SELF_POWERED;
+			result[0] |= musb->may_wakeup <<
+						USB_DEVICE_REMOTE_WAKEUP;
+			if (musb->g.is_otg) {
+				result[0] |= musb->g.b_hnp_enable
+					<< USB_DEVICE_B_HNP_ENABLE;
+				result[0] |= musb->g.a_alt_hnp_support
+					<< USB_DEVICE_A_ALT_HNP_SUPPORT;
+				result[0] |= musb->g.a_hnp_support
+					<< USB_DEVICE_A_HNP_SUPPORT;
+			}
+#ifdef CONFIG_USB_OTG_20
+			} else {
+				result[0] = 1 & musb->g.otg_hnp_reqd;
 		}
+#endif
 		break;
 
 	case USB_RECIP_INTERFACE:
@@ -356,7 +373,22 @@ __acquires(musb->lock)
 						musb->test_mode_nr =
 							MUSB_TEST_PACKET;
 						break;
-
+#ifdef	CONFIG_USB_OTG_20
+					case 6:
+						if (!musb->g.is_otg)
+							goto stall;
+						musb->g.otg_srp_reqd = 1;
+
+						mod_timer(&musb->otg_timer,
+						jiffies
+						+ msecs_to_jiffies(TTST_SRP));
+						break;
+					case 7:
+						if (!musb->g.is_otg)
+							goto stall;
+						musb->g.otg_hnp_reqd = 1;
+						break;
+#endif
 					case 0xc0:
 						/* TEST_FORCE_HS */
 						pr_debug("TEST_FORCE_HS\n");
diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
index 03f2655af29..1c96cf60907 100644
--- a/drivers/usb/musb/musb_regs.h
+++ b/drivers/usb/musb/musb_regs.h
@@ -246,7 +246,9 @@
  */
 
 #define MUSB_DEVCTL		0x60	/* 8 bit */
-
+#ifdef	CONFIG_USB_OTG_20
+#define MUSB_MISC		0x61	/* 8 bit */
+#endif
 /* These are always controlled through the INDEX register */
 #define MUSB_TXFIFOSZ		0x62	/* 8-bit (see masks) */
 #define MUSB_RXFIFOSZ		0x63	/* 8-bit (see masks) */
diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
index fe322cf541c..89ef846d32c 100644
--- a/drivers/usb/musb/ux500.c
+++ b/drivers/usb/musb/ux500.c
@@ -311,11 +311,18 @@ static void ux500_musb_set_vbus(struct musb *musb, int is_on)
 	u8		devctl;
 	unsigned long timeout = jiffies + msecs_to_jiffies(1000);
 	int ret = 1;
+#ifdef	CONFIG_USB_OTG_20
+	int val = 0;
+#endif
 	/* HDRC controls CPEN, but beware current surges during device
 	 * connect.  They can trigger transient overcurrent conditions
 	 * that must be ignored.
 	 */
-
+#ifdef	CONFIG_USB_OTG_20
+	val = musb_readb(musb->mregs, MUSB_MISC);
+	val |= 0x1C;
+	musb_writeb(musb->mregs, MUSB_MISC, val);
+#endif
 	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
 
 	if (is_on) {
diff --git a/drivers/usb/otg/ab8500-usb.c b/drivers/usb/otg/ab8500-usb.c
index a698165135e..7efd64b3bc5 100644
--- a/drivers/usb/otg/ab8500-usb.c
+++ b/drivers/usb/otg/ab8500-usb.c
@@ -484,6 +484,26 @@ static unsigned ab8500_eyediagram_workaroud(struct ab8500_usb *ab, unsigned mA)
 	return mA;
 }
 
+#ifdef CONFIG_USB_OTG_20
+static int ab8500_usb_start_srp(struct usb_phy *phy, unsigned mA)
+{
+	struct ab8500_usb *ab;
+
+	if (!phy)
+		return -ENODEV;
+
+	ab = phy_to_ab(phy);
+
+	atomic_notifier_call_chain(&ab->phy.notifier,
+				   USB_EVENT_PREPARE,
+				   &ab->vbus_draw);
+
+	ab8500_usb_peri_phy_en(ab);
+
+	return 0;
+}
+#endif
+
 static int ab8500_usb_set_power(struct usb_phy *phy, unsigned mA)
 {
 	struct ab8500_usb *ab;
@@ -838,6 +858,9 @@ static int __devinit ab8500_usb_probe(struct platform_device *pdev)
 	otg->phy		= &ab->phy;
 	otg->set_host		= ab8500_usb_set_host;
 	otg->set_peripheral	= ab8500_usb_set_peripheral;
+#ifdef CONFIG_USB_OTG_20
+	ab->otg.start_srp	= ab8500_usb_start_srp;
+#endif
 	ab->sysfs_flag		= true;
 
 	platform_set_drvdata(pdev, ab);