summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devices.txt1
-rw-r--r--Documentation/filesystems/proc.txt32
-rw-r--r--MAINTAINERS10
-rw-r--r--arch/arm/include/asm/ioctls.h83
-rw-r--r--arch/avr32/include/asm/ioctls.h86
-rw-r--r--arch/cris/include/asm/ioctls.h84
-rw-r--r--arch/frv/include/asm/ioctls.h80
-rw-r--r--arch/h8300/include/asm/ioctls.h81
-rw-r--r--arch/ia64/hp/sim/simserial.c12
-rw-r--r--arch/ia64/include/asm/ioctls.h89
-rw-r--r--arch/m32r/include/asm/ioctls.h83
-rw-r--r--arch/mips/alchemy/common/platform.c28
-rw-r--r--arch/mips/alchemy/common/power.c35
-rw-r--r--arch/mn10300/include/asm/ioctls.h84
-rw-r--r--arch/s390/include/asm/ioctls.h88
-rw-r--r--drivers/char/Kconfig15
-rw-r--r--drivers/char/Makefile1
-rw-r--r--drivers/char/amiserial.c56
-rw-r--r--drivers/char/cyclades.c49
-rw-r--r--drivers/char/ip2/ip2main.c72
-rw-r--r--drivers/char/mxser.c109
-rw-r--r--drivers/char/nozomi.c37
-rw-r--r--drivers/char/pcmcia/synclink_cs.c60
-rw-r--r--drivers/char/pty.c4
-rw-r--r--drivers/char/synclink.c73
-rw-r--r--drivers/char/synclink_gt.c55
-rw-r--r--drivers/char/synclinkmp.c61
-rw-r--r--drivers/char/tty_io.c77
-rw-r--r--drivers/char/ttyprintk.c225
-rw-r--r--drivers/char/vc_screen.c135
-rw-r--r--drivers/char/vt.c5
-rw-r--r--drivers/input/serio/serport.c1
-rw-r--r--drivers/net/usb/hso.c35
-rw-r--r--drivers/serial/68360serial.c51
-rw-r--r--drivers/serial/8250.c69
-rw-r--r--drivers/serial/Kconfig7
-rw-r--r--drivers/serial/altera_uart.c156
-rw-r--r--drivers/serial/bfin_sport_uart.c7
-rw-r--r--drivers/serial/imx.c5
-rw-r--r--drivers/serial/jsm/jsm_driver.c4
-rw-r--r--drivers/serial/max3107.c34
-rw-r--r--drivers/serial/mfd.c47
-rw-r--r--drivers/serial/mrst_max3110.c358
-rw-r--r--drivers/serial/mrst_max3110.h1
-rw-r--r--drivers/serial/serial_core.c49
-rw-r--r--drivers/serial/uartlite.c26
-rw-r--r--drivers/usb/serial/ark3116.c40
-rw-r--r--drivers/usb/serial/ftdi_sio.c1
-rw-r--r--drivers/usb/serial/io_edgeport.c49
-rw-r--r--drivers/usb/serial/io_tables.h4
-rw-r--r--drivers/usb/serial/io_ti.c29
-rw-r--r--drivers/usb/serial/mos7720.c54
-rw-r--r--drivers/usb/serial/mos7840.c53
-rw-r--r--drivers/usb/serial/ssu100.c48
-rw-r--r--drivers/usb/serial/ti_usb_3410_5052.c37
-rw-r--r--drivers/usb/serial/usb-serial.c13
-rw-r--r--fs/proc/proc_tty.c158
-rw-r--r--include/asm-generic/ioctls.h2
-rw-r--r--include/linux/altera_uart.h5
-rw-r--r--include/linux/selection.h1
-rw-r--r--include/linux/serial_8250.h8
-rw-r--r--include/linux/serial_core.h10
-rw-r--r--include/linux/tty.h3
-rw-r--r--include/linux/tty_driver.h9
-rw-r--r--include/linux/usb/serial.h2
-rw-r--r--net/bluetooth/rfcomm/tty.c4
66 files changed, 1757 insertions, 1533 deletions
diff --git a/Documentation/devices.txt b/Documentation/devices.txt
index d0d1df6cb5d..6a08fd731d2 100644
--- a/Documentation/devices.txt
+++ b/Documentation/devices.txt
@@ -239,6 +239,7 @@ Your cooperation is appreciated.
0 = /dev/tty Current TTY device
1 = /dev/console System console
2 = /dev/ptmx PTY master multiplex
+ 3 = /dev/ttyprintk User messages via printk TTY device
64 = /dev/cua0 Callout device for ttyS0
...
255 = /dev/cua191 Callout device for ttyS191
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index a6aca874088..98223a67694 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -1075,6 +1075,7 @@ Table 1-11: Files in /proc/tty
drivers list of drivers and their usage
ldiscs registered line disciplines
driver/serial usage statistic and status of single tty lines
+ consoles registered system console lines
..............................................................................
To see which tty's are currently in use, you can simply look into the file
@@ -1093,6 +1094,37 @@ To see which tty's are currently in use, you can simply look into the file
/dev/tty /dev/tty 5 0 system:/dev/tty
unknown /dev/tty 4 1-63 console
+To see which character device lines are currently used for the system console
+/dev/console, you may simply look into the file /proc/tty/consoles:
+
+ > cat /proc/tty/consoles
+ tty0 -WU (ECp) 4:7
+ ttyS0 -W- (Ep) 4:64
+
+The columns are:
+
+ device name of the device
+ operations R = can do read operations
+ W = can do write operations
+ U = can do unblank
+ flags E = it is enabled
+ C = it is prefered console
+ B = it is primary boot console
+ p = it is used for printk buffer
+ b = it is not a TTY but a Braille device
+ a = it is safe to use when cpu is offline
+ * = it is standard input of the reading process
+ major:minor major and minor number of the device separated by a colon
+
+If the reading process holds /dev/console open at the regular standard input
+stream the active device will be marked by an asterisk:
+
+ > cat /proc/tty/consoles < /dev/console
+ tty0 -WU (ECp*) 4:7
+ ttyS0 -W- (Ep) 4:64
+ > tty
+ /dev/pts/3
+
1.8 Miscellaneous kernel statistics in /proc/stat
-------------------------------------------------
diff --git a/MAINTAINERS b/MAINTAINERS
index fd19b544a1b..060e32ab35f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -157,9 +157,11 @@ S: Maintained
F: drivers/net/r8169.c
8250/16?50 (AND CLONE UARTS) SERIAL DRIVER
+M: Greg Kroah-Hartman <gregkh@suse.de>
L: linux-serial@vger.kernel.org
W: http://serial.sourceforge.net
-S: Orphan
+S: Maintained
+T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
F: drivers/serial/8250*
F: include/linux/serial_8250.h
@@ -3353,6 +3355,12 @@ F: fs/jbd*/
F: include/linux/ext*jbd*.h
F: include/linux/jbd*.h
+JSM Neo PCI based serial card
+M: Breno Leitao <leitao@linux.vnet.ibm.com>
+L: linux-serial@vger.kernel.org
+S: Maintained
+F: drivers/serial/jsm/
+
K8TEMP HARDWARE MONITORING DRIVER
M: Rudolf Marek <r.marek@assembler.cz>
L: lm-sensors@lm-sensors.org
diff --git a/arch/arm/include/asm/ioctls.h b/arch/arm/include/asm/ioctls.h
index 0b30894b548..9c962981612 100644
--- a/arch/arm/include/asm/ioctls.h
+++ b/arch/arm/include/asm/ioctls.h
@@ -1,89 +1,8 @@
#ifndef __ASM_ARM_IOCTLS_H
#define __ASM_ARM_IOCTLS_H
-#include <asm/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS 0x5401
-#define TCSETS 0x5402
-#define TCSETSW 0x5403
-#define TCSETSF 0x5404
-#define TCGETA 0x5405
-#define TCSETA 0x5406
-#define TCSETAW 0x5407
-#define TCSETAF 0x5408
-#define TCSBRK 0x5409
-#define TCXONC 0x540A
-#define TCFLSH 0x540B
-#define TIOCEXCL 0x540C
-#define TIOCNXCL 0x540D
-#define TIOCSCTTY 0x540E
-#define TIOCGPGRP 0x540F
-#define TIOCSPGRP 0x5410
-#define TIOCOUTQ 0x5411
-#define TIOCSTI 0x5412
-#define TIOCGWINSZ 0x5413
-#define TIOCSWINSZ 0x5414
-#define TIOCMGET 0x5415
-#define TIOCMBIS 0x5416
-#define TIOCMBIC 0x5417
-#define TIOCMSET 0x5418
-#define TIOCGSOFTCAR 0x5419
-#define TIOCSSOFTCAR 0x541A
-#define FIONREAD 0x541B
-#define TIOCINQ FIONREAD
-#define TIOCLINUX 0x541C
-#define TIOCCONS 0x541D
-#define TIOCGSERIAL 0x541E
-#define TIOCSSERIAL 0x541F
-#define TIOCPKT 0x5420
-#define FIONBIO 0x5421
-#define TIOCNOTTY 0x5422
-#define TIOCSETD 0x5423
-#define TIOCGETD 0x5424
-#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
-#define TIOCSBRK 0x5427 /* BSD compatibility */
-#define TIOCCBRK 0x5428 /* BSD compatibility */
-#define TIOCGSID 0x5429 /* Return the session ID of FD */
-#define TCGETS2 _IOR('T',0x2A, struct termios2)
-#define TCSETS2 _IOW('T',0x2B, struct termios2)
-#define TCSETSW2 _IOW('T',0x2C, struct termios2)
-#define TCSETSF2 _IOW('T',0x2D, struct termios2)
-#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
-#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
-
-#define TIOCGRS485 0x542E
-#define TIOCSRS485 0x542F
-
-#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
-#define FIOCLEX 0x5451
-#define FIOASYNC 0x5452
-#define TIOCSERCONFIG 0x5453
-#define TIOCSERGWILD 0x5454
-#define TIOCSERSWILD 0x5455
-#define TIOCGLCKTRMIOS 0x5456
-#define TIOCSLCKTRMIOS 0x5457
-#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
-#define TIOCSERGETLSR 0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
-#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
#define FIOQSIZE 0x545E
-/* Used for packet mode */
-#define TIOCPKT_DATA 0
-#define TIOCPKT_FLUSHREAD 1
-#define TIOCPKT_FLUSHWRITE 2
-#define TIOCPKT_STOP 4
-#define TIOCPKT_START 8
-#define TIOCPKT_NOSTOP 16
-#define TIOCPKT_DOSTOP 32
-#define TIOCPKT_IOCTL 64
-
-#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
+#include <asm-generic/ioctls.h>
#endif
diff --git a/arch/avr32/include/asm/ioctls.h b/arch/avr32/include/asm/ioctls.h
index b7dd324b46a..909cf66feaf 100644
--- a/arch/avr32/include/asm/ioctls.h
+++ b/arch/avr32/include/asm/ioctls.h
@@ -1,90 +1,6 @@
#ifndef __ASM_AVR32_IOCTLS_H
#define __ASM_AVR32_IOCTLS_H
-#include <asm/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS 0x5401
-#define TCSETS 0x5402 /* Clashes with SNDCTL_TMR_START sound ioctl */
-#define TCSETSW 0x5403
-#define TCSETSF 0x5404
-#define TCGETA 0x5405
-#define TCSETA 0x5406
-#define TCSETAW 0x5407
-#define TCSETAF 0x5408
-#define TCSBRK 0x5409
-#define TCXONC 0x540A
-#define TCFLSH 0x540B
-#define TIOCEXCL 0x540C
-#define TIOCNXCL 0x540D
-#define TIOCSCTTY 0x540E
-#define TIOCGPGRP 0x540F
-#define TIOCSPGRP 0x5410
-#define TIOCOUTQ 0x5411
-#define TIOCSTI 0x5412
-#define TIOCGWINSZ 0x5413
-#define TIOCSWINSZ 0x5414
-#define TIOCMGET 0x5415
-#define TIOCMBIS 0x5416
-#define TIOCMBIC 0x5417
-#define TIOCMSET 0x5418
-#define TIOCGSOFTCAR 0x5419
-#define TIOCSSOFTCAR 0x541A
-#define FIONREAD 0x541B
-#define TIOCINQ FIONREAD
-#define TIOCLINUX 0x541C
-#define TIOCCONS 0x541D
-#define TIOCGSERIAL 0x541E
-#define TIOCSSERIAL 0x541F
-#define TIOCPKT 0x5420
-#define FIONBIO 0x5421
-#define TIOCNOTTY 0x5422
-#define TIOCSETD 0x5423
-#define TIOCGETD 0x5424
-#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
-/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */
-#define TIOCSBRK 0x5427 /* BSD compatibility */
-#define TIOCCBRK 0x5428 /* BSD compatibility */
-#define TIOCGSID 0x5429 /* Return the session ID of FD */
-#define TCGETS2 _IOR('T',0x2A, struct termios2)
-#define TCSETS2 _IOW('T',0x2B, struct termios2)
-#define TCSETSW2 _IOW('T',0x2C, struct termios2)
-#define TCSETSF2 _IOW('T',0x2D, struct termios2)
-#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
-#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
-
-#define TIOCGRS485 0x542E
-#define TIOCSRS485 0x542F
-
-#define FIONCLEX 0x5450
-#define FIOCLEX 0x5451
-#define FIOASYNC 0x5452
-#define TIOCSERCONFIG 0x5453
-#define TIOCSERGWILD 0x5454
-#define TIOCSERSWILD 0x5455
-#define TIOCGLCKTRMIOS 0x5456
-#define TIOCSLCKTRMIOS 0x5457
-#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
-#define TIOCSERGETLSR 0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
-#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
-#define FIOQSIZE 0x5460
-
-/* Used for packet mode */
-#define TIOCPKT_DATA 0
-#define TIOCPKT_FLUSHREAD 1
-#define TIOCPKT_FLUSHWRITE 2
-#define TIOCPKT_STOP 4
-#define TIOCPKT_START 8
-#define TIOCPKT_NOSTOP 16
-#define TIOCPKT_DOSTOP 32
-#define TIOCPKT_IOCTL 64
-
-#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
+#include <asm-generic/ioctls.h>
#endif /* __ASM_AVR32_IOCTLS_H */
diff --git a/arch/cris/include/asm/ioctls.h b/arch/cris/include/asm/ioctls.h
index c9129ed3744..488fbb3f5e8 100644
--- a/arch/cris/include/asm/ioctls.h
+++ b/arch/cris/include/asm/ioctls.h
@@ -1,93 +1,11 @@
#ifndef __ARCH_CRIS_IOCTLS_H__
#define __ARCH_CRIS_IOCTLS_H__
-/* verbatim copy of asm-i386/ioctls.h */
-
-#include <asm/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS 0x5401
-#define TCSETS 0x5402
-#define TCSETSW 0x5403
-#define TCSETSF 0x5404
-#define TCGETA 0x5405
-#define TCSETA 0x5406
-#define TCSETAW 0x5407
-#define TCSETAF 0x5408
-#define TCSBRK 0x5409
-#define TCXONC 0x540A
-#define TCFLSH 0x540B
-#define TIOCEXCL 0x540C
-#define TIOCNXCL 0x540D
-#define TIOCSCTTY 0x540E
-#define TIOCGPGRP 0x540F
-#define TIOCSPGRP 0x5410
-#define TIOCOUTQ 0x5411
-#define TIOCSTI 0x5412
-#define TIOCGWINSZ 0x5413
-#define TIOCSWINSZ 0x5414
-#define TIOCMGET 0x5415
-#define TIOCMBIS 0x5416
-#define TIOCMBIC 0x5417
-#define TIOCMSET 0x5418
-#define TIOCGSOFTCAR 0x5419
-#define TIOCSSOFTCAR 0x541A
-#define FIONREAD 0x541B
-#define TIOCINQ FIONREAD
-#define TIOCLINUX 0x541C
-#define TIOCCONS 0x541D
-#define TIOCGSERIAL 0x541E
-#define TIOCSSERIAL 0x541F
-#define TIOCPKT 0x5420
-#define FIONBIO 0x5421
-#define TIOCNOTTY 0x5422
-#define TIOCSETD 0x5423
-#define TIOCGETD 0x5424
-#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
-#define TIOCSBRK 0x5427 /* BSD compatibility */
-#define TIOCCBRK 0x5428 /* BSD compatibility */
-#define TIOCGSID 0x5429 /* Return the session ID of FD */
-#define TCGETS2 _IOR('T',0x2A, struct termios2)
-#define TCSETS2 _IOW('T',0x2B, struct termios2)
-#define TCSETSW2 _IOW('T',0x2C, struct termios2)
-#define TCSETSF2 _IOW('T',0x2D, struct termios2)
-#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
-#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
-
-#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
-#define FIOCLEX 0x5451
-#define FIOASYNC 0x5452
-#define TIOCSERCONFIG 0x5453
-#define TIOCSERGWILD 0x5454
-#define TIOCSERSWILD 0x5455
-#define TIOCGLCKTRMIOS 0x5456
-#define TIOCSLCKTRMIOS 0x5457
#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
-#define TIOCSERGETLSR 0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
-#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
-#define FIOQSIZE 0x5460
-
#define TIOCSERSETRS485 0x5461 /* enable rs-485 (deprecated) */
#define TIOCSERWRRS485 0x5462 /* write rs-485 */
#define TIOCSRS485 0x5463 /* enable rs-485 */
-#define TIOCGRS485 0x542E /* get rs-485 */
-
-/* Used for packet mode */
-#define TIOCPKT_DATA 0
-#define TIOCPKT_FLUSHREAD 1
-#define TIOCPKT_FLUSHWRITE 2
-#define TIOCPKT_STOP 4
-#define TIOCPKT_START 8
-#define TIOCPKT_NOSTOP 16
-#define TIOCPKT_DOSTOP 32
-#define TIOCPKT_IOCTL 64
-#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
+#include <asm-generic/ioctls.h>
#endif
diff --git a/arch/frv/include/asm/ioctls.h b/arch/frv/include/asm/ioctls.h
index a993e3759cc..2f9fb436ec3 100644
--- a/arch/frv/include/asm/ioctls.h
+++ b/arch/frv/include/asm/ioctls.h
@@ -1,88 +1,10 @@
#ifndef __ASM_IOCTLS_H__
#define __ASM_IOCTLS_H__
-#include <asm/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS 0x5401
-#define TCSETS 0x5402
-#define TCSETSW 0x5403
-#define TCSETSF 0x5404
-#define TCGETA 0x5405
-#define TCSETA 0x5406
-#define TCSETAW 0x5407
-#define TCSETAF 0x5408
-#define TCSBRK 0x5409
-#define TCXONC 0x540A
-#define TCFLSH 0x540B
-#define TIOCEXCL 0x540C
-#define TIOCNXCL 0x540D
-#define TIOCSCTTY 0x540E
-#define TIOCGPGRP 0x540F
-#define TIOCSPGRP 0x5410
-#define TIOCOUTQ 0x5411
-#define TIOCSTI 0x5412
-#define TIOCGWINSZ 0x5413
-#define TIOCSWINSZ 0x5414
-#define TIOCMGET 0x5415
-#define TIOCMBIS 0x5416
-#define TIOCMBIC 0x5417
-#define TIOCMSET 0x5418
-#define TIOCGSOFTCAR 0x5419
-#define TIOCSSOFTCAR 0x541A
-#define FIONREAD 0x541B
-#define TIOCINQ FIONREAD
-#define TIOCLINUX 0x541C
-#define TIOCCONS 0x541D
-#define TIOCGSERIAL 0x541E
-#define TIOCSSERIAL 0x541F
-#define TIOCPKT 0x5420
-#define FIONBIO 0x5421
-#define TIOCNOTTY 0x5422
-#define TIOCSETD 0x5423
-#define TIOCGETD 0x5424
-#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
#define TIOCTTYGSTRUCT 0x5426 /* For debugging only */
-#define TIOCSBRK 0x5427 /* BSD compatibility */
-#define TIOCCBRK 0x5428 /* BSD compatibility */
-#define TIOCGSID 0x5429 /* Return the session ID of FD */
-#define TCGETS2 _IOR('T',0x2A, struct termios2)
-#define TCSETS2 _IOW('T',0x2B, struct termios2)
-#define TCSETSW2 _IOW('T',0x2C, struct termios2)
-#define TCSETSF2 _IOW('T',0x2D, struct termios2)
-#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
-#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
-
-#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
-#define FIOCLEX 0x5451
-#define FIOASYNC 0x5452
-#define TIOCSERCONFIG 0x5453
-#define TIOCSERGWILD 0x5454
-#define TIOCSERSWILD 0x5455
-#define TIOCGLCKTRMIOS 0x5456
-#define TIOCSLCKTRMIOS 0x5457
-#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
-#define TIOCSERGETLSR 0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
-#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
#define FIOQSIZE 0x545E
-/* Used for packet mode */
-#define TIOCPKT_DATA 0
-#define TIOCPKT_FLUSHREAD 1
-#define TIOCPKT_FLUSHWRITE 2
-#define TIOCPKT_STOP 4
-#define TIOCPKT_START 8
-#define TIOCPKT_NOSTOP 16
-#define TIOCPKT_DOSTOP 32
-#define TIOCPKT_IOCTL 64
-
-#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
+#include <asm-generic/ioctls.h>
#endif /* __ASM_IOCTLS_H__ */
diff --git a/arch/h8300/include/asm/ioctls.h b/arch/h8300/include/asm/ioctls.h
index b6b249f9f30..30eaed2facd 100644
--- a/arch/h8300/include/asm/ioctls.h
+++ b/arch/h8300/include/asm/ioctls.h
@@ -1,87 +1,8 @@
#ifndef __ARCH_H8300_IOCTLS_H__
#define __ARCH_H8300_IOCTLS_H__
-#include <asm/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS 0x5401
-#define TCSETS 0x5402
-#define TCSETSW 0x5403
-#define TCSETSF 0x5404
-#define TCGETA 0x5405
-#define TCSETA 0x5406
-#define TCSETAW 0x5407
-#define TCSETAF 0x5408
-#define TCSBRK 0x5409
-#define TCXONC 0x540A
-#define TCFLSH 0x540B
-#define TIOCEXCL 0x540C
-#define TIOCNXCL 0x540D
-#define TIOCSCTTY 0x540E
-#define TIOCGPGRP 0x540F
-#define TIOCSPGRP 0x5410
-#define TIOCOUTQ 0x5411
-#define TIOCSTI 0x5412
-#define TIOCGWINSZ 0x5413
-#define TIOCSWINSZ 0x5414
-#define TIOCMGET 0x5415
-#define TIOCMBIS 0x5416
-#define TIOCMBIC 0x5417
-#define TIOCMSET 0x5418
-#define TIOCGSOFTCAR 0x5419
-#define TIOCSSOFTCAR 0x541A
-#define FIONREAD 0x541B
-#define TIOCINQ FIONREAD
-#define TIOCLINUX 0x541C
-#define TIOCCONS 0x541D
-#define TIOCGSERIAL 0x541E
-#define TIOCSSERIAL 0x541F
-#define TIOCPKT 0x5420
-#define FIONBIO 0x5421
-#define TIOCNOTTY 0x5422
-#define TIOCSETD 0x5423
-#define TIOCGETD 0x5424
-#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
-#define TIOCTTYGSTRUCT 0x5426 /* For debugging only */
-#define TIOCSBRK 0x5427 /* BSD compatibility */
-#define TIOCCBRK 0x5428 /* BSD compatibility */
-#define TIOCGSID 0x5429 /* Return the session ID of FD */
-#define TCGETS2 _IOR('T',0x2A, struct termios2)
-#define TCSETS2 _IOW('T',0x2B, struct termios2)
-#define TCSETSW2 _IOW('T',0x2C, struct termios2)
-#define TCSETSF2 _IOW('T',0x2D, struct termios2)
-#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
-#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
-
-#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
-#define FIOCLEX 0x5451
-#define FIOASYNC 0x5452
-#define TIOCSERCONFIG 0x5453
-#define TIOCSERGWILD 0x5454
-#define TIOCSERSWILD 0x5455
-#define TIOCGLCKTRMIOS 0x5456
-#define TIOCSLCKTRMIOS 0x5457
-#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
-#define TIOCSERGETLSR 0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
-#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
#define FIOQSIZE 0x545E
-/* Used for packet mode */
-#define TIOCPKT_DATA 0
-#define TIOCPKT_FLUSHREAD 1
-#define TIOCPKT_FLUSHWRITE 2
-#define TIOCPKT_STOP 4
-#define TIOCPKT_START 8
-#define TIOCPKT_NOSTOP 16
-#define TIOCPKT_DOSTOP 32
-#define TIOCPKT_IOCTL 64
-
-#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
+#include <asm-generic/ioctls.h>
#endif /* __ARCH_H8300_IOCTLS_H__ */
diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c
index 1e8d71ad93e..13633da0d3d 100644
--- a/arch/ia64/hp/sim/simserial.c
+++ b/arch/ia64/hp/sim/simserial.c
@@ -395,7 +395,7 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file,
{
if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
(cmd != TIOCSERCONFIG) && (cmd != TIOCSERGSTRUCT) &&
- (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
+ (cmd != TIOCMIWAIT)) {
if (tty->flags & (1 << TTY_IO_ERROR))
return -EIO;
}
@@ -433,16 +433,6 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file,
case TIOCMIWAIT:
printk(KERN_INFO "rs_ioctl: TIOCMIWAIT: called\n");
return 0;
- /*
- * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
- * Return: write counters to the user passed counter struct
- * NB: both 1->0 and 0->1 transitions are counted except for
- * RI where only 0->1 is counted.
- */
- case TIOCGICOUNT:
- printk(KERN_INFO "rs_ioctl: TIOCGICOUNT called\n");
- return 0;
-
case TIOCSERGWILD:
case TIOCSERSWILD:
/* "setserial -W" is called in Debian boot */
diff --git a/arch/ia64/include/asm/ioctls.h b/arch/ia64/include/asm/ioctls.h
index b79c385114e..f3aab5512e9 100644
--- a/arch/ia64/include/asm/ioctls.h
+++ b/arch/ia64/include/asm/ioctls.h
@@ -1,93 +1,6 @@
#ifndef _ASM_IA64_IOCTLS_H
#define _ASM_IA64_IOCTLS_H
-/*
- * Based on <asm-i386/ioctls.h>
- *
- * Modified 1998, 1999, 2002
- * David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
- */
-
-#include <asm/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS 0x5401
-#define TCSETS 0x5402 /* Clashes with SNDCTL_TMR_START sound ioctl */
-#define TCSETSW 0x5403
-#define TCSETSF 0x5404
-#define TCGETA 0x5405
-#define TCSETA 0x5406
-#define TCSETAW 0x5407
-#define TCSETAF 0x5408
-#define TCSBRK 0x5409
-#define TCXONC 0x540A
-#define TCFLSH 0x540B
-#define TIOCEXCL 0x540C
-#define TIOCNXCL 0x540D
-#define TIOCSCTTY 0x540E
-#define TIOCGPGRP 0x540F
-#define TIOCSPGRP 0x5410
-#define TIOCOUTQ 0x5411
-#define TIOCSTI 0x5412
-#define TIOCGWINSZ 0x5413
-#define TIOCSWINSZ 0x5414
-#define TIOCMGET 0x5415
-#define TIOCMBIS 0x5416
-#define TIOCMBIC 0x5417
-#define TIOCMSET 0x5418
-#define TIOCGSOFTCAR 0x5419
-#define TIOCSSOFTCAR 0x541A
-#define FIONREAD 0x541B
-#define TIOCINQ FIONREAD
-#define TIOCLINUX 0x541C
-#define TIOCCONS 0x541D
-#define TIOCGSERIAL 0x541E
-#define TIOCSSERIAL 0x541F
-#define TIOCPKT 0x5420
-#define FIONBIO 0x5421
-#define TIOCNOTTY 0x5422
-#define TIOCSETD 0x5423
-#define TIOCGETD 0x5424
-#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
-#define TIOCSBRK 0x5427 /* BSD compatibility */
-#define TIOCCBRK 0x5428 /* BSD compatibility */
-#define TIOCGSID 0x5429 /* Return the session ID of FD */
-#define TCGETS2 _IOR('T',0x2A, struct termios2)
-#define TCSETS2 _IOW('T',0x2B, struct termios2)
-#define TCSETSW2 _IOW('T',0x2C, struct termios2)
-#define TCSETSF2 _IOW('T',0x2D, struct termios2)
-#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
-#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
-
-#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
-#define FIOCLEX 0x5451
-#define FIOASYNC 0x5452
-#define TIOCSERCONFIG 0x5453
-#define TIOCSERGWILD 0x5454
-#define TIOCSERSWILD 0x5455
-#define TIOCGLCKTRMIOS 0x5456
-#define TIOCSLCKTRMIOS 0x5457
-#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
-#define TIOCSERGETLSR 0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
-#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
-#define FIOQSIZE 0x5460
-
-/* Used for packet mode */
-#define TIOCPKT_DATA 0
-#define TIOCPKT_FLUSHREAD 1
-#define TIOCPKT_FLUSHWRITE 2
-#define TIOCPKT_STOP 4
-#define TIOCPKT_START 8
-#define TIOCPKT_NOSTOP 16
-#define TIOCPKT_DOSTOP 32
-#define TIOCPKT_IOCTL 64
-
-#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
+#include <asm-generic/ioctls.h>
#endif /* _ASM_IA64_IOCTLS_H */
diff --git a/arch/m32r/include/asm/ioctls.h b/arch/m32r/include/asm/ioctls.h
index 66288063a4c..349bf87bfbd 100644
--- a/arch/m32r/include/asm/ioctls.h
+++ b/arch/m32r/include/asm/ioctls.h
@@ -1,87 +1,6 @@
#ifndef __ARCH_M32R_IOCTLS_H__
#define __ARCH_M32R_IOCTLS_H__
-#include <asm/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS 0x5401
-#define TCSETS 0x5402 /* Clashes with SNDCTL_TMR_START sound ioctl */
-#define TCSETSW 0x5403
-#define TCSETSF 0x5404
-#define TCGETA 0x5405
-#define TCSETA 0x5406
-#define TCSETAW 0x5407
-#define TCSETAF 0x5408
-#define TCSBRK 0x5409
-#define TCXONC 0x540A
-#define TCFLSH 0x540B
-#define TIOCEXCL 0x540C
-#define TIOCNXCL 0x540D
-#define TIOCSCTTY 0x540E
-#define TIOCGPGRP 0x540F
-#define TIOCSPGRP 0x5410
-#define TIOCOUTQ 0x5411
-#define TIOCSTI 0x5412
-#define TIOCGWINSZ 0x5413
-#define TIOCSWINSZ 0x5414
-#define TIOCMGET 0x5415
-#define TIOCMBIS 0x5416
-#define TIOCMBIC 0x5417
-#define TIOCMSET 0x5418
-#define TIOCGSOFTCAR 0x5419
-#define TIOCSSOFTCAR 0x541A
-#define FIONREAD 0x541B
-#define TIOCINQ FIONREAD
-#define TIOCLINUX 0x541C
-#define TIOCCONS 0x541D
-#define TIOCGSERIAL 0x541E
-#define TIOCSSERIAL 0x541F
-#define TIOCPKT 0x5420
-#define FIONBIO 0x5421
-#define TIOCNOTTY 0x5422
-#define TIOCSETD 0x5423
-#define TIOCGETD 0x5424
-#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
-/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */
-#define TIOCSBRK 0x5427 /* BSD compatibility */
-#define TIOCCBRK 0x5428 /* BSD compatibility */
-#define TIOCGSID 0x5429 /* Return the session ID of FD */
-#define TCGETS2 _IOR('T',0x2A, struct termios2)
-#define TCSETS2 _IOW('T',0x2B, struct termios2)
-#define TCSETSW2 _IOW('T',0x2C, struct termios2)
-#define TCSETSF2 _IOW('T',0x2D, struct termios2)
-#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
-#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
-
-#define FIONCLEX 0x5450
-#define FIOCLEX 0x5451
-#define FIOASYNC 0x5452
-#define TIOCSERCONFIG 0x5453
-#define TIOCSERGWILD 0x5454
-#define TIOCSERSWILD 0x5455
-#define TIOCGLCKTRMIOS 0x5456
-#define TIOCSLCKTRMIOS 0x5457
-#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
-#define TIOCSERGETLSR 0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
-#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
-#define FIOQSIZE 0x5460
-
-/* Used for packet mode */
-#define TIOCPKT_DATA 0
-#define TIOCPKT_FLUSHREAD 1
-#define TIOCPKT_FLUSHWRITE 2
-#define TIOCPKT_STOP 4
-#define TIOCPKT_START 8
-#define TIOCPKT_NOSTOP 16
-#define TIOCPKT_DOSTOP 32
-#define TIOCPKT_IOCTL 64
-
-#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
+#include <asm-generic/ioctls.h>
#endif /* __ARCH_M32R_IOCTLS_H__ */
diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c
index 1dc55ee2681..3691630931d 100644
--- a/arch/mips/alchemy/common/platform.c
+++ b/arch/mips/alchemy/common/platform.c
@@ -24,6 +24,33 @@
#include <prom.h>
+static void alchemy_8250_pm(struct uart_port *port, unsigned int state,
+ unsigned int old_state)
+{
+ switch (state) {
+ case 0:
+ if ((__raw_readl(port->membase + UART_MOD_CNTRL) & 3) != 3) {
+ /* power-on sequence as suggested in the databooks */
+ __raw_writel(0, port->membase + UART_MOD_CNTRL);
+ wmb();
+ __raw_writel(1, port->membase + UART_MOD_CNTRL);
+ wmb();
+ }
+ __raw_writel(3, port->membase + UART_MOD_CNTRL); /* full on */
+ wmb();
+ serial8250_do_pm(port, state, old_state);
+ break;
+ case 3: /* power off */
+ serial8250_do_pm(port, state, old_state);
+ __raw_writel(0, port->membase + UART_MOD_CNTRL);
+ wmb();
+ break;
+ default:
+ serial8250_do_pm(port, state, old_state);
+ break;
+ }
+}
+
#define PORT(_base, _irq) \
{ \
.mapbase = _base, \
@@ -33,6 +60,7 @@
.flags = UPF_SKIP_TEST | UPF_IOREMAP | \
UPF_FIXED_TYPE, \
.type = PORT_16550A, \
+ .pm = alchemy_8250_pm, \
}
static struct plat_serial8250_port au1x00_uart_data[] = {
diff --git a/arch/mips/alchemy/common/power.c b/arch/mips/alchemy/common/power.c
index 5ef06a164a8..e5916a516e5 100644
--- a/arch/mips/alchemy/common/power.c
+++ b/arch/mips/alchemy/common/power.c
@@ -49,11 +49,6 @@
* We only have to save/restore registers that aren't otherwise
* done as part of a driver pm_* function.
*/
-static unsigned int sleep_uart0_inten;
-static unsigned int sleep_uart0_fifoctl;
-static unsigned int sleep_uart0_linectl;
-static unsigned int sleep_uart0_clkdiv;
-static unsigned int sleep_uart0_enable;
static unsigned int sleep_usb[2];
static unsigned int sleep_sys_clocks[5];
static unsigned int sleep_sys_pinfunc;
@@ -62,22 +57,6 @@ static unsigned int sleep_static_memctlr[4][3];
static void save_core_regs(void)
{
- extern void save_au1xxx_intctl(void);
- extern void pm_eth0_shutdown(void);
-
- /*
- * Do the serial ports.....these really should be a pm_*
- * registered function by the driver......but of course the
- * standard serial driver doesn't understand our Au1xxx
- * unique registers.
- */
- sleep_uart0_inten = au_readl(UART0_ADDR + UART_IER);
- sleep_uart0_fifoctl = au_readl(UART0_ADDR + UART_FCR);
- sleep_uart0_linectl = au_readl(UART0_ADDR + UART_LCR);
- sleep_uart0_clkdiv = au_readl(UART0_ADDR + UART_CLK);
- sleep_uart0_enable = au_readl(UART0_ADDR + UART_MOD_CNTRL);
- au_sync();
-
#ifndef CONFIG_SOC_AU1200
/* Shutdown USB host/device. */
sleep_usb[0] = au_readl(USB_HOST_CONFIG);
@@ -175,20 +154,6 @@ static void restore_core_regs(void)
au_writel(sleep_static_memctlr[3][0], MEM_STCFG3);
au_writel(sleep_static_memctlr[3][1], MEM_STTIME3);
au_writel(sleep_static_memctlr[3][2], MEM_STADDR3);
-
- /*
- * Enable the UART if it was enabled before sleep.
- * I guess I should define module control bits........
- */
- if (sleep_uart0_enable & 0x02) {
- au_writel(0, UART0_ADDR + UART_MOD_CNTRL); au_sync();
- au_writel(1, UART0_ADDR + UART_MOD_CNTRL); au_sync();
- au_writel(3, UART0_ADDR + UART_MOD_CNTRL); au_sync();
- au_writel(sleep_uart0_inten, UART0_ADDR + UART_IER); au_sync();
- au_writel(sleep_uart0_fifoctl, UART0_ADDR + UART_FCR); au_sync();
- au_writel(sleep_uart0_linectl, UART0_ADDR + UART_LCR); au_sync();
- au_writel(sleep_uart0_clkdiv, UART0_ADDR + UART_CLK); au_sync();
- }
}
void au_sleep(void)
diff --git a/arch/mn10300/include/asm/ioctls.h b/arch/mn10300/include/asm/ioctls.h
index cb8cf190223..0212f4b2255 100644
--- a/arch/mn10300/include/asm/ioctls.h
+++ b/arch/mn10300/include/asm/ioctls.h
@@ -1,88 +1,6 @@
#ifndef _ASM_IOCTLS_H
#define _ASM_IOCTLS_H
-#include <asm/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS 0x5401
-#define TCSETS 0x5402
-#define TCSETSW 0x5403
-#define TCSETSF 0x5404
-#define TCGETA 0x5405
-#define TCSETA 0x5406
-#define TCSETAW 0x5407
-#define TCSETAF 0x5408
-#define TCSBRK 0x5409
-#define TCXONC 0x540A
-#define TCFLSH 0x540B
-#define TIOCEXCL 0x540C
-#define TIOCNXCL 0x540D
-#define TIOCSCTTY 0x540E
-#define TIOCGPGRP 0x540F
-#define TIOCSPGRP 0x5410
-#define TIOCOUTQ 0x5411
-#define TIOCSTI 0x5412
-#define TIOCGWINSZ 0x5413
-#define TIOCSWINSZ 0x5414
-#define TIOCMGET 0x5415
-#define TIOCMBIS 0x5416
-#define TIOCMBIC 0x5417
-#define TIOCMSET 0x5418
-#define TIOCGSOFTCAR 0x5419
-#define TIOCSSOFTCAR 0x541A
-#define FIONREAD 0x541B
-#define TIOCINQ FIONREAD
-#define TIOCLINUX 0x541C
-#define TIOCCONS 0x541D
-#define TIOCGSERIAL 0x541E
-#define TIOCSSERIAL 0x541F
-#define TIOCPKT 0x5420
-#define FIONBIO 0x5421
-#define TIOCNOTTY 0x5422
-#define TIOCSETD 0x5423
-#define TIOCGETD 0x5424
-#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
-/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */
-#define TIOCSBRK 0x5427 /* BSD compatibility */
-#define TIOCCBRK 0x5428 /* BSD compatibility */
-#define TIOCGSID 0x5429 /* Return the session ID of FD */
-#define TCGETS2 _IOR('T', 0x2A, struct termios2)
-#define TCSETS2 _IOW('T', 0x2B, struct termios2)
-#define TCSETSW2 _IOW('T', 0x2C, struct termios2)
-#define TCSETSF2 _IOW('T', 0x2D, struct termios2)
-#define TIOCGPTN _IOR('T', 0x30, unsigned int) /* Get Pty Number
- * (of pty-mux device) */
-#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */
-#define TIOCSIG _IOW('T', 0x36, int) /* Generate signal on Pty slave */
-
-#define FIONCLEX 0x5450
-#define FIOCLEX 0x5451
-#define FIOASYNC 0x5452
-#define TIOCSERCONFIG 0x5453
-#define TIOCSERGWILD 0x5454
-#define TIOCSERSWILD 0x5455
-#define TIOCGLCKTRMIOS 0x5456
-#define TIOCSLCKTRMIOS 0x5457
-#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
-#define TIOCSERGETLSR 0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
-#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
-#define FIOQSIZE 0x5460
-
-/* Used for packet mode */
-#define TIOCPKT_DATA 0
-#define TIOCPKT_FLUSHREAD 1
-#define TIOCPKT_FLUSHWRITE 2
-#define TIOCPKT_STOP 4
-#define TIOCPKT_START 8
-#define TIOCPKT_NOSTOP 16
-#define TIOCPKT_DOSTOP 32
-#define TIOCPKT_IOCTL 64
-
-#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
+#include <asm-generic/ioctls.h>
#endif /* _ASM_IOCTLS_H */
diff --git a/arch/s390/include/asm/ioctls.h b/arch/s390/include/asm/ioctls.h
index 2f3d8736361..960a4c1ebdf 100644
--- a/arch/s390/include/asm/ioctls.h
+++ b/arch/s390/include/asm/ioctls.h
@@ -1,94 +1,8 @@
-/*
- * include/asm-s390/ioctls.h
- *
- * S390 version
- *
- * Derived from "include/asm-i386/ioctls.h"
- */
-
#ifndef __ARCH_S390_IOCTLS_H__
#define __ARCH_S390_IOCTLS_H__
-#include <asm/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS 0x5401
-#define TCSETS 0x5402
-#define TCSETSW 0x5403
-#define TCSETSF 0x5404
-#define TCGETA 0x5405
-#define TCSETA 0x5406
-#define TCSETAW 0x5407
-#define TCSETAF 0x5408
-#define TCSBRK 0x5409
-#define TCXONC 0x540A
-#define TCFLSH 0x540B
-#define TIOCEXCL 0x540C
-#define TIOCNXCL 0x540D
-#define TIOCSCTTY 0x540E
-#define TIOCGPGRP 0x540F
-#define TIOCSPGRP 0x5410
-#define TIOCOUTQ 0x5411
-#define TIOCSTI 0x5412
-#define TIOCGWINSZ 0x5413
-#define TIOCSWINSZ 0x5414
-#define TIOCMGET 0x5415
-#define TIOCMBIS 0x5416
-#define TIOCMBIC 0x5417
-#define TIOCMSET 0x5418
-#define TIOCGSOFTCAR 0x5419
-#define TIOCSSOFTCAR 0x541A
-#define FIONREAD 0x541B
-#define TIOCINQ FIONREAD
-#define TIOCLINUX 0x541C
-#define TIOCCONS 0x541D
-#define TIOCGSERIAL 0x541E
-#define TIOCSSERIAL 0x541F
-#define TIOCPKT 0x5420
-#define FIONBIO 0x5421
-#define TIOCNOTTY 0x5422
-#define TIOCSETD 0x5423
-#define TIOCGETD 0x5424
-#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
-#define TIOCSBRK 0x5427 /* BSD compatibility */
-#define TIOCCBRK 0x5428 /* BSD compatibility */
-#define TIOCGSID 0x5429 /* Return the session ID of FD */
-#define TCGETS2 _IOR('T',0x2A, struct termios2)
-#define TCSETS2 _IOW('T',0x2B, struct termios2)
-#define TCSETSW2 _IOW('T',0x2C, struct termios2)
-#define TCSETSF2 _IOW('T',0x2D, struct termios2)
-#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
-#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
-
-#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
-#define FIOCLEX 0x5451
-#define FIOASYNC 0x5452
-#define TIOCSERCONFIG 0x5453
-#define TIOCSERGWILD 0x5454
-#define TIOCSERSWILD 0x5455
-#define TIOCGLCKTRMIOS 0x5456
-#define TIOCSLCKTRMIOS 0x5457
-#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
-#define TIOCSERGETLSR 0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
-#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
#define FIOQSIZE 0x545E
-/* Used for packet mode */
-#define TIOCPKT_DATA 0
-#define TIOCPKT_FLUSHREAD 1
-#define TIOCPKT_FLUSHWRITE 2
-#define TIOCPKT_STOP 4
-#define TIOCPKT_START 8
-#define TIOCPKT_NOSTOP 16
-#define TIOCPKT_DOSTOP 32
-#define TIOCPKT_IOCTL 64
-
-#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
+#include <asm-generic/ioctls.h>
#endif
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 3d44ec724c1..43d3395325c 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -493,6 +493,21 @@ config LEGACY_PTY_COUNT
When not in use, each legacy PTY occupies 12 bytes on 32-bit
architectures and 24 bytes on 64-bit architectures.
+config TTY_PRINTK
+ bool "TTY driver to output user messages via printk"
+ depends on EMBEDDED
+ default n
+ ---help---
+ If you say Y here, the support for writing user messages (i.e.
+ console messages) via printk is available.
+
+ The feature is useful to inline user messages with kernel
+ messages.
+ In order to use this feature, you should output user messages
+ to /dev/ttyprintk or redirect console to this TTY.
+
+ If unsure, say N.
+
config BRIQ_PANEL
tristate 'Total Impact briQ front panel driver'
depends on PPC_CHRP
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index dc964166060..3a9c0141683 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -12,6 +12,7 @@ obj-y += mem.o random.o tty_io.o n_tty.o tty_ioctl.o tty_ldisc.o tty_buffer.o t
obj-y += tty_mutex.o
obj-$(CONFIG_LEGACY_PTYS) += pty.o
obj-$(CONFIG_UNIX98_PTYS) += pty.o
+obj-$(CONFIG_TTY_PRINTK) += ttyprintk.o
obj-y += misc.o
obj-$(CONFIG_VT) += vt_ioctl.o vc_screen.o selection.o keyboard.o
obj-$(CONFIG_BFIN_JTAG_COMM) += bfin_jtag_comm.o
diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c
index a11c8c9ca3d..b0a70461a12 100644
--- a/drivers/char/amiserial.c
+++ b/drivers/char/amiserial.c
@@ -1263,6 +1263,36 @@ static int rs_break(struct tty_struct *tty, int break_state)
return 0;
}
+/*
+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+ * Return: write counters to the user passed counter struct
+ * NB: both 1->0 and 0->1 transitions are counted except for
+ * RI where only 0->1 is counted.
+ */
+static int rs_get_icount(struct tty_struct *tty,
+ struct serial_icounter_struct *icount)
+{
+ struct async_struct *info = tty->driver_data;
+ struct async_icount cnow;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ cnow = info->state->icount;
+ local_irq_restore(flags);
+ icount->cts = cnow.cts;
+ icount->dsr = cnow.dsr;
+ icount->rng = cnow.rng;
+ icount->dcd = cnow.dcd;
+ icount->rx = cnow.rx;
+ icount->tx = cnow.tx;
+ icount->frame = cnow.frame;
+ icount->overrun = cnow.overrun;
+ icount->parity = cnow.parity;
+ icount->brk = cnow.brk;
+ icount->buf_overrun = cnow.buf_overrun;
+
+ return 0;
+}
static int rs_ioctl(struct tty_struct *tty, struct file * file,
unsigned int cmd, unsigned long arg)
@@ -1332,31 +1362,6 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file,
}
/* NOTREACHED */
- /*
- * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
- * Return: write counters to the user passed counter struct
- * NB: both 1->0 and 0->1 transitions are counted except for
- * RI where only 0->1 is counted.
- */
- case TIOCGICOUNT:
- local_irq_save(flags);
- cnow = info->state->icount;
- local_irq_restore(flags);
- icount.cts = cnow.cts;
- icount.dsr = cnow.dsr;
- icount.rng = cnow.rng;
- icount.dcd = cnow.dcd;
- icount.rx = cnow.rx;
- icount.tx = cnow.tx;
- icount.frame = cnow.frame;
- icount.overrun = cnow.overrun;
- icount.parity = cnow.parity;
- icount.brk = cnow.brk;
- icount.buf_overrun = cnow.buf_overrun;
-
- if (copy_to_user(argp, &icount, sizeof(icount)))
- return -EFAULT;
- return 0;
case TIOCSERGWILD:
case TIOCSERSWILD:
/* "setserial -W" is called in Debian boot */
@@ -1958,6 +1963,7 @@ static const struct tty_operations serial_ops = {
.wait_until_sent = rs_wait_until_sent,
.tiocmget = rs_tiocmget,
.tiocmset = rs_tiocmset,
+ .get_icount = rs_get_icount,
.proc_fops = &rs_proc_fops,
};
diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c
index 27aad942233..4f152c28f40 100644
--- a/drivers/char/cyclades.c
+++ b/drivers/char/cyclades.c
@@ -2790,29 +2790,6 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
* NB: both 1->0 and 0->1 transitions are counted except for
* RI where only 0->1 is counted.
*/
- case TIOCGICOUNT: {
- struct serial_icounter_struct sic = { };
-
- spin_lock_irqsave(&info->card->card_lock, flags);
- cnow = info->icount;
- spin_unlock_irqrestore(&info->card->card_lock, flags);
-
- sic.cts = cnow.cts;
- sic.dsr = cnow.dsr;
- sic.rng = cnow.rng;
- sic.dcd = cnow.dcd;
- sic.rx = cnow.rx;
- sic.tx = cnow.tx;
- sic.frame = cnow.frame;
- sic.overrun = cnow.overrun;
- sic.parity = cnow.parity;
- sic.brk = cnow.brk;
- sic.buf_overrun = cnow.buf_overrun;
-
- if (copy_to_user(argp, &sic, sizeof(sic)))
- ret_val = -EFAULT;
- break;
- }
default:
ret_val = -ENOIOCTLCMD;
}
@@ -2823,6 +2800,31 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
return ret_val;
} /* cy_ioctl */
+static int cy_get_icount(struct tty_struct *tty,
+ struct serial_icounter_struct *sic)
+{
+ struct cyclades_port *info = tty->driver_data;
+ struct cyclades_icount cnow; /* Used to snapshot */
+ unsigned long flags;
+
+ spin_lock_irqsave(&info->card->card_lock, flags);
+ cnow = info->icount;
+ spin_unlock_irqrestore(&info->card->card_lock, flags);
+
+ sic->cts = cnow.cts;
+ sic->dsr = cnow.dsr;
+ sic->rng = cnow.rng;
+ sic->dcd = cnow.dcd;
+ sic->rx = cnow.rx;
+ sic->tx = cnow.tx;
+ sic->frame = cnow.frame;
+ sic->overrun = cnow.overrun;
+ sic->parity = cnow.parity;
+ sic->brk = cnow.brk;
+ sic->buf_overrun = cnow.buf_overrun;
+ return 0;
+}
+
/*
* This routine allows the tty driver to be notified when
* device's termios settings have changed. Note that a
@@ -4084,6 +4086,7 @@ static const struct tty_operations cy_ops = {
.wait_until_sent = cy_wait_until_sent,
.tiocmget = cy_tiocmget,
.tiocmset = cy_tiocmset,
+ .get_icount = cy_get_icount,
.proc_fops = &cyclades_proc_fops,
};
diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c
index 64a439ce2f8..fcd02baa7d6 100644
--- a/drivers/char/ip2/ip2main.c
+++ b/drivers/char/ip2/ip2main.c
@@ -184,6 +184,8 @@ static void ip2_hangup(PTTY);
static int ip2_tiocmget(struct tty_struct *tty, struct file *file);
static int ip2_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear);
+static int ip2_get_icount(struct tty_struct *tty,
+ struct serial_icounter_struct *icount);
static void set_irq(int, int);
static void ip2_interrupt_bh(struct work_struct *work);
@@ -456,6 +458,7 @@ static const struct tty_operations ip2_ops = {
.hangup = ip2_hangup,
.tiocmget = ip2_tiocmget,
.tiocmset = ip2_tiocmset,
+ .get_icount = ip2_get_icount,
.proc_fops = &ip2_proc_fops,
};
@@ -2130,7 +2133,6 @@ ip2_ioctl ( PTTY tty, struct file *pFile, UINT cmd, ULONG arg )
i2ChanStrPtr pCh = DevTable[tty->index];
i2eBordStrPtr pB;
struct async_icount cprev, cnow; /* kernel counter temps */
- struct serial_icounter_struct __user *p_cuser;
int rc = 0;
unsigned long flags;
void __user *argp = (void __user *)arg;
@@ -2299,34 +2301,6 @@ ip2_ioctl ( PTTY tty, struct file *pFile, UINT cmd, ULONG arg )
break;
/*
- * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
- * Return: write counters to the user passed counter struct
- * NB: both 1->0 and 0->1 transitions are counted except for RI where
- * only 0->1 is counted. The controller is quite capable of counting
- * both, but this done to preserve compatibility with the standard
- * serial driver.
- */
- case TIOCGICOUNT:
- ip2trace (CHANN, ITRC_IOCTL, 11, 1, rc );
-
- write_lock_irqsave(&pB->read_fifo_spinlock, flags);
- cnow = pCh->icount;
- write_unlock_irqrestore(&pB->read_fifo_spinlock, flags);
- p_cuser = argp;
- rc = put_user(cnow.cts, &p_cuser->cts);
- rc = put_user(cnow.dsr, &p_cuser->dsr);
- rc = put_user(cnow.rng, &p_cuser->rng);
- rc = put_user(cnow.dcd, &p_cuser->dcd);
- rc = put_user(cnow.rx, &p_cuser->rx);
- rc = put_user(cnow.tx, &p_cuser->tx);
- rc = put_user(cnow.frame, &p_cuser->frame);
- rc = put_user(cnow.overrun, &p_cuser->overrun);
- rc = put_user(cnow.parity, &p_cuser->parity);
- rc = put_user(cnow.brk, &p_cuser->brk);
- rc = put_user(cnow.buf_overrun, &p_cuser->buf_overrun);
- break;
-
- /*
* The rest are not supported by this driver. By returning -ENOIOCTLCMD they
* will be passed to the line discipline for it to handle.
*/
@@ -2350,6 +2324,46 @@ ip2_ioctl ( PTTY tty, struct file *pFile, UINT cmd, ULONG arg )
return rc;
}
+static int ip2_get_icount(struct tty_struct *tty,
+ struct serial_icounter_struct *icount)
+{
+ i2ChanStrPtr pCh = DevTable[tty->index];
+ i2eBordStrPtr pB;
+ struct async_icount cnow; /* kernel counter temp */
+ unsigned long flags;
+
+ if ( pCh == NULL )
+ return -ENODEV;
+
+ pB = pCh->pMyBord;
+
+ /*
+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+ * Return: write counters to the user passed counter struct
+ * NB: both 1->0 and 0->1 transitions are counted except for RI where
+ * only 0->1 is counted. The controller is quite capable of counting
+ * both, but this done to preserve compatibility with the standard
+ * serial driver.
+ */
+
+ write_lock_irqsave(&pB->read_fifo_spinlock, flags);
+ cnow = pCh->icount;
+ write_unlock_irqrestore(&pB->read_fifo_spinlock, flags);
+
+ icount->cts = cnow.cts;
+ icount->dsr = cnow.dsr;
+ icount->rng = cnow.rng;
+ icount->dcd = cnow.dcd;
+ icount->rx = cnow.rx;
+ icount->tx = cnow.tx;
+ icount->frame = cnow.frame;
+ icount->overrun = cnow.overrun;
+ icount->parity = cnow.parity;
+ icount->brk = cnow.brk;
+ icount->buf_overrun = cnow.buf_overrun;
+ return 0;
+}
+
/******************************************************************************/
/* Function: GetSerialInfo() */
/* Parameters: Pointer to channel structure */
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index 3fc89da856a..463df27494b 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -1700,7 +1700,7 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,
return 0;
}
- if (cmd != TIOCGSERIAL && cmd != TIOCMIWAIT && cmd != TIOCGICOUNT &&
+ if (cmd != TIOCGSERIAL && cmd != TIOCMIWAIT &&
test_bit(TTY_IO_ERROR, &tty->flags))
return -EIO;
@@ -1730,32 +1730,6 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,
return wait_event_interruptible(info->port.delta_msr_wait,
mxser_cflags_changed(info, arg, &cnow));
- /*
- * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
- * Return: write counters to the user passed counter struct
- * NB: both 1->0 and 0->1 transitions are counted except for
- * RI where only 0->1 is counted.
- */
- case TIOCGICOUNT: {
- struct serial_icounter_struct icnt = { 0 };
- spin_lock_irqsave(&info->slock, flags);
- cnow = info->icount;
- spin_unlock_irqrestore(&info->slock, flags);
-
- icnt.frame = cnow.frame;
- icnt.brk = cnow.brk;
- icnt.overrun = cnow.overrun;
- icnt.buf_overrun = cnow.buf_overrun;
- icnt.parity = cnow.parity;
- icnt.rx = cnow.rx;
- icnt.tx = cnow.tx;
- icnt.cts = cnow.cts;
- icnt.dsr = cnow.dsr;
- icnt.rng = cnow.rng;
- icnt.dcd = cnow.dcd;
-
- return copy_to_user(argp, &icnt, sizeof(icnt)) ? -EFAULT : 0;
- }
case MOXA_HighSpeedOn:
return put_user(info->baud_base != 115200 ? 1 : 0, (int __user *)argp);
case MOXA_SDS_RSTICOUNTER:
@@ -1828,6 +1802,39 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,
return 0;
}
+ /*
+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+ * Return: write counters to the user passed counter struct
+ * NB: both 1->0 and 0->1 transitions are counted except for
+ * RI where only 0->1 is counted.
+ */
+
+static int mxser_get_icount(struct tty_struct *tty,
+ struct serial_icounter_struct *icount)
+
+{
+ struct mxser_port *info = tty->driver_data;
+ struct async_icount cnow;
+ unsigned long flags;
+
+ spin_lock_irqsave(&info->slock, flags);
+ cnow = info->icount;
+ spin_unlock_irqrestore(&info->slock, flags);
+
+ icount->frame = cnow.frame;
+ icount->brk = cnow.brk;
+ icount->overrun = cnow.overrun;
+ icount->buf_overrun = cnow.buf_overrun;
+ icount->parity = cnow.parity;
+ icount->rx = cnow.rx;
+ icount->tx = cnow.tx;
+ icount->cts = cnow.cts;
+ icount->dsr = cnow.dsr;
+ icount->rng = cnow.rng;
+ icount->dcd = cnow.dcd;
+ return 0;
+}
+
static void mxser_stoprx(struct tty_struct *tty)
{
struct mxser_port *info = tty->driver_data;
@@ -2326,6 +2333,7 @@ static const struct tty_operations mxser_ops = {
.wait_until_sent = mxser_wait_until_sent,
.tiocmget = mxser_tiocmget,
.tiocmset = mxser_tiocmset,
+ .get_icount = mxser_get_icount,
};
struct tty_port_operations mxser_port_ops = {
@@ -2339,20 +2347,11 @@ struct tty_port_operations mxser_port_ops = {
* The MOXA Smartio/Industio serial driver boot-time initialization code!
*/
-static void mxser_release_res(struct mxser_board *brd, struct pci_dev *pdev,
- unsigned int irq)
+static void mxser_release_ISA_res(struct mxser_board *brd)
{
- if (irq)
- free_irq(brd->irq, brd);
- if (pdev != NULL) { /* PCI */
-#ifdef CONFIG_PCI
- pci_release_region(pdev, 2);
- pci_release_region(pdev, 3);
-#endif
- } else {
- release_region(brd->ports[0].ioaddr, 8 * brd->info->nports);
- release_region(brd->vector, 1);
- }
+ free_irq(brd->irq, brd);
+ release_region(brd->ports[0].ioaddr, 8 * brd->info->nports);
+ release_region(brd->vector, 1);
}
static int __devinit mxser_initbrd(struct mxser_board *brd,
@@ -2397,13 +2396,11 @@ static int __devinit mxser_initbrd(struct mxser_board *brd,
retval = request_irq(brd->irq, mxser_interrupt, IRQF_SHARED, "mxser",
brd);
- if (retval) {
+ if (retval)
printk(KERN_ERR "Board %s: Request irq failed, IRQ (%d) may "
"conflict with another device.\n",
brd->info->name, brd->irq);
- /* We hold resources, we need to release them. */
- mxser_release_res(brd, pdev, 0);
- }
+
return retval;
}
@@ -2555,7 +2552,7 @@ static int __devinit mxser_probe(struct pci_dev *pdev,
ioaddress = pci_resource_start(pdev, 2);
retval = pci_request_region(pdev, 2, "mxser(IO)");
if (retval)
- goto err;
+ goto err_dis;
brd->info = &mxser_cards[ent->driver_data];
for (i = 0; i < brd->info->nports; i++)
@@ -2565,7 +2562,7 @@ static int __devinit mxser_probe(struct pci_dev *pdev,
ioaddress = pci_resource_start(pdev, 3);
retval = pci_request_region(pdev, 3, "mxser(vector)");
if (retval)
- goto err_relio;
+ goto err_zero;
brd->vector = ioaddress;
/* irq */
@@ -2608,7 +2605,7 @@ static int __devinit mxser_probe(struct pci_dev *pdev,
/* mxser_initbrd will hook ISR. */
retval = mxser_initbrd(brd, pdev);
if (retval)
- goto err_null;
+ goto err_rel3;
for (i = 0; i < brd->info->nports; i++)
tty_register_device(mxvar_sdriver, brd->idx + i, &pdev->dev);
@@ -2616,10 +2613,13 @@ static int __devinit mxser_probe(struct pci_dev *pdev,
pci_set_drvdata(pdev, brd);
return 0;
-err_relio:
- pci_release_region(pdev, 2);
-err_null:
+err_rel3:
+ pci_release_region(pdev, 3);
+err_zero:
brd->info = NULL;
+ pci_release_region(pdev, 2);
+err_dis:
+ pci_disable_device(pdev);
err:
return retval;
#else
@@ -2629,14 +2629,19 @@ err:
static void __devexit mxser_remove(struct pci_dev *pdev)
{
+#ifdef CONFIG_PCI
struct mxser_board *brd = pci_get_drvdata(pdev);
unsigned int i;
for (i = 0; i < brd->info->nports; i++)
tty_unregister_device(mxvar_sdriver, brd->idx + i);
- mxser_release_res(brd, pdev, 1);
+ free_irq(pdev->irq, brd);
+ pci_release_region(pdev, 2);
+ pci_release_region(pdev, 3);
+ pci_disable_device(pdev);
brd->info = NULL;
+#endif
}
static struct pci_driver mxser_driver = {
@@ -2741,7 +2746,7 @@ static void __exit mxser_module_exit(void)
for (i = 0; i < MXSER_BOARDS; i++)
if (mxser_boards[i].info != NULL)
- mxser_release_res(&mxser_boards[i], NULL, 1);
+ mxser_release_ISA_res(&mxser_boards[i]);
}
module_init(mxser_module_init);
diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c
index 817169cbb24..dd3f9b1f11b 100644
--- a/drivers/char/nozomi.c
+++ b/drivers/char/nozomi.c
@@ -1804,24 +1804,24 @@ static int ntty_cflags_changed(struct port *port, unsigned long flags,
return ret;
}
-static int ntty_ioctl_tiocgicount(struct port *port, void __user *argp)
+static int ntty_tiocgicount(struct tty_struct *tty,
+ struct serial_icounter_struct *icount)
{
+ struct port *port = tty->driver_data;
const struct async_icount cnow = port->tty_icount;
- struct serial_icounter_struct icount;
-
- icount.cts = cnow.cts;
- icount.dsr = cnow.dsr;
- icount.rng = cnow.rng;
- icount.dcd = cnow.dcd;
- icount.rx = cnow.rx;
- icount.tx = cnow.tx;
- icount.frame = cnow.frame;
- icount.overrun = cnow.overrun;
- icount.parity = cnow.parity;
- icount.brk = cnow.brk;
- icount.buf_overrun = cnow.buf_overrun;
-
- return copy_to_user(argp, &icount, sizeof(icount)) ? -EFAULT : 0;
+
+ icount->cts = cnow.cts;
+ icount->dsr = cnow.dsr;
+ icount->rng = cnow.rng;
+ icount->dcd = cnow.dcd;
+ icount->rx = cnow.rx;
+ icount->tx = cnow.tx;
+ icount->frame = cnow.frame;
+ icount->overrun = cnow.overrun;
+ icount->parity = cnow.parity;
+ icount->brk = cnow.brk;
+ icount->buf_overrun = cnow.buf_overrun;
+ return 0;
}
static int ntty_ioctl(struct tty_struct *tty, struct file *file,
@@ -1840,9 +1840,7 @@ static int ntty_ioctl(struct tty_struct *tty, struct file *file,
rval = wait_event_interruptible(port->tty_wait,
ntty_cflags_changed(port, arg, &cprev));
break;
- } case TIOCGICOUNT:
- rval = ntty_ioctl_tiocgicount(port, argp);
- break;
+ }
default:
DBG1("ERR: 0x%08X, %d", cmd, cmd);
break;
@@ -1922,6 +1920,7 @@ static const struct tty_operations tty_ops = {
.chars_in_buffer = ntty_chars_in_buffer,
.tiocmget = ntty_tiocmget,
.tiocmset = ntty_tiocmset,
+ .get_icount = ntty_tiocgicount,
.install = ntty_install,
.cleanup = ntty_cleanup,
};
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index be181005760..bfc10f89d95 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -2191,6 +2191,32 @@ static int mgslpc_break(struct tty_struct *tty, int break_state)
return 0;
}
+static int mgslpc_get_icount(struct tty_struct *tty,
+ struct serial_icounter_struct *icount)
+{
+ MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
+ struct mgsl_icount cnow; /* kernel counter temps */
+ unsigned long flags;
+
+ spin_lock_irqsave(&info->lock,flags);
+ cnow = info->icount;
+ spin_unlock_irqrestore(&info->lock,flags);
+
+ icount->cts = cnow.cts;
+ icount->dsr = cnow.dsr;
+ icount->rng = cnow.rng;
+ icount->dcd = cnow.dcd;
+ icount->rx = cnow.rx;
+ icount->tx = cnow.tx;
+ icount->frame = cnow.frame;
+ icount->overrun = cnow.overrun;
+ icount->parity = cnow.parity;
+ icount->brk = cnow.brk;
+ icount->buf_overrun = cnow.buf_overrun;
+
+ return 0;
+}
+
/* Service an IOCTL request
*
* Arguments:
@@ -2206,11 +2232,7 @@ static int mgslpc_ioctl(struct tty_struct *tty, struct file * file,
unsigned int cmd, unsigned long arg)
{
MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
- int error;
- struct mgsl_icount cnow; /* kernel counter temps */
- struct serial_icounter_struct __user *p_cuser; /* user space */
void __user *argp = (void __user *)arg;
- unsigned long flags;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgslpc_ioctl %s cmd=%08X\n", __FILE__,__LINE__,
@@ -2220,7 +2242,7 @@ static int mgslpc_ioctl(struct tty_struct *tty, struct file * file,
return -ENODEV;
if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
- (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
+ (cmd != TIOCMIWAIT)) {
if (tty->flags & (1 << TTY_IO_ERROR))
return -EIO;
}
@@ -2250,34 +2272,6 @@ static int mgslpc_ioctl(struct tty_struct *tty, struct file * file,
return wait_events(info, argp);
case TIOCMIWAIT:
return modem_input_wait(info,(int)arg);
- case TIOCGICOUNT:
- spin_lock_irqsave(&info->lock,flags);
- cnow = info->icount;
- spin_unlock_irqrestore(&info->lock,flags);
- p_cuser = argp;
- PUT_USER(error,cnow.cts, &p_cuser->cts);
- if (error) return error;
- PUT_USER(error,cnow.dsr, &p_cuser->dsr);
- if (error) return error;
- PUT_USER(error,cnow.rng, &p_cuser->rng);
- if (error) return error;
- PUT_USER(error,cnow.dcd, &p_cuser->dcd);
- if (error) return error;
- PUT_USER(error,cnow.rx, &p_cuser->rx);
- if (error) return error;
- PUT_USER(error,cnow.tx, &p_cuser->tx);
- if (error) return error;
- PUT_USER(error,cnow.frame, &p_cuser->frame);
- if (error) return error;
- PUT_USER(error,cnow.overrun, &p_cuser->overrun);
- if (error) return error;
- PUT_USER(error,cnow.parity, &p_cuser->parity);
- if (error) return error;
- PUT_USER(error,cnow.brk, &p_cuser->brk);
- if (error) return error;
- PUT_USER(error,cnow.buf_overrun, &p_cuser->buf_overrun);
- if (error) return error;
- return 0;
default:
return -ENOIOCTLCMD;
}
diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index c350d01716b..923a4858550 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -676,7 +676,9 @@ static int ptmx_open(struct inode *inode, struct file *filp)
set_bit(TTY_PTY_LOCK, &tty->flags); /* LOCK THE SLAVE */
- tty_add_file(tty, filp);
+ retval = tty_add_file(tty, filp);
+ if (retval)
+ goto out;
retval = devpts_pty_new(inode, tty->link);
if (retval)
diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c
index a2a58004e18..3a6824f12be 100644
--- a/drivers/char/synclink.c
+++ b/drivers/char/synclink.c
@@ -2925,6 +2925,38 @@ static int mgsl_break(struct tty_struct *tty, int break_state)
} /* end of mgsl_break() */
+/*
+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+ * Return: write counters to the user passed counter struct
+ * NB: both 1->0 and 0->1 transitions are counted except for
+ * RI where only 0->1 is counted.
+ */
+static int msgl_get_icount(struct tty_struct *tty,
+ struct serial_icounter_struct *icount)
+
+{
+ struct mgsl_struct * info = tty->driver_data;
+ struct mgsl_icount cnow; /* kernel counter temps */
+ unsigned long flags;
+
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ cnow = info->icount;
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+ icount->cts = cnow.cts;
+ icount->dsr = cnow.dsr;
+ icount->rng = cnow.rng;
+ icount->dcd = cnow.dcd;
+ icount->rx = cnow.rx;
+ icount->tx = cnow.tx;
+ icount->frame = cnow.frame;
+ icount->overrun = cnow.overrun;
+ icount->parity = cnow.parity;
+ icount->brk = cnow.brk;
+ icount->buf_overrun = cnow.buf_overrun;
+ return 0;
+}
+
/* mgsl_ioctl() Service an IOCTL request
*
* Arguments:
@@ -2949,7 +2981,7 @@ static int mgsl_ioctl(struct tty_struct *tty, struct file * file,
return -ENODEV;
if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
- (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
+ (cmd != TIOCMIWAIT)) {
if (tty->flags & (1 << TTY_IO_ERROR))
return -EIO;
}
@@ -2959,11 +2991,7 @@ static int mgsl_ioctl(struct tty_struct *tty, struct file * file,
static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg)
{
- int error;
- struct mgsl_icount cnow; /* kernel counter temps */
void __user *argp = (void __user *)arg;
- struct serial_icounter_struct __user *p_cuser; /* user space */
- unsigned long flags;
switch (cmd) {
case MGSL_IOCGPARAMS:
@@ -2992,40 +3020,6 @@ static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigne
case TIOCMIWAIT:
return modem_input_wait(info,(int)arg);
- /*
- * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
- * Return: write counters to the user passed counter struct
- * NB: both 1->0 and 0->1 transitions are counted except for
- * RI where only 0->1 is counted.
- */
- case TIOCGICOUNT:
- spin_lock_irqsave(&info->irq_spinlock,flags);
- cnow = info->icount;
- spin_unlock_irqrestore(&info->irq_spinlock,flags);
- p_cuser = argp;
- PUT_USER(error,cnow.cts, &p_cuser->cts);
- if (error) return error;
- PUT_USER(error,cnow.dsr, &p_cuser->dsr);
- if (error) return error;
- PUT_USER(error,cnow.rng, &p_cuser->rng);
- if (error) return error;
- PUT_USER(error,cnow.dcd, &p_cuser->dcd);
- if (error) return error;
- PUT_USER(error,cnow.rx, &p_cuser->rx);
- if (error) return error;
- PUT_USER(error,cnow.tx, &p_cuser->tx);
- if (error) return error;
- PUT_USER(error,cnow.frame, &p_cuser->frame);
- if (error) return error;
- PUT_USER(error,cnow.overrun, &p_cuser->overrun);
- if (error) return error;
- PUT_USER(error,cnow.parity, &p_cuser->parity);
- if (error) return error;
- PUT_USER(error,cnow.brk, &p_cuser->brk);
- if (error) return error;
- PUT_USER(error,cnow.buf_overrun, &p_cuser->buf_overrun);
- if (error) return error;
- return 0;
default:
return -ENOIOCTLCMD;
}
@@ -4328,6 +4322,7 @@ static const struct tty_operations mgsl_ops = {
.hangup = mgsl_hangup,
.tiocmget = tiocmget,
.tiocmset = tiocmset,
+ .get_icount = msgl_get_icount,
.proc_fops = &mgsl_proc_fops,
};
diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index e63b830c86c..1746d91205f 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -1032,9 +1032,6 @@ static int ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
struct slgt_info *info = tty->driver_data;
- struct mgsl_icount cnow; /* kernel counter temps */
- struct serial_icounter_struct __user *p_cuser; /* user space */
- unsigned long flags;
void __user *argp = (void __user *)arg;
int ret;
@@ -1043,7 +1040,7 @@ static int ioctl(struct tty_struct *tty, struct file *file,
DBGINFO(("%s ioctl() cmd=%08X\n", info->device_name, cmd));
if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
- (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
+ (cmd != TIOCMIWAIT)) {
if (tty->flags & (1 << TTY_IO_ERROR))
return -EIO;
}
@@ -1053,24 +1050,6 @@ static int ioctl(struct tty_struct *tty, struct file *file,
return wait_mgsl_event(info, argp);
case TIOCMIWAIT:
return modem_input_wait(info,(int)arg);
- case TIOCGICOUNT:
- spin_lock_irqsave(&info->lock,flags);
- cnow = info->icount;
- spin_unlock_irqrestore(&info->lock,flags);
- p_cuser = argp;
- if (put_user(cnow.cts, &p_cuser->cts) ||
- put_user(cnow.dsr, &p_cuser->dsr) ||
- put_user(cnow.rng, &p_cuser->rng) ||
- put_user(cnow.dcd, &p_cuser->dcd) ||
- put_user(cnow.rx, &p_cuser->rx) ||
- put_user(cnow.tx, &p_cuser->tx) ||
- put_user(cnow.frame, &p_cuser->frame) ||
- put_user(cnow.overrun, &p_cuser->overrun) ||
- put_user(cnow.parity, &p_cuser->parity) ||
- put_user(cnow.brk, &p_cuser->brk) ||
- put_user(cnow.buf_overrun, &p_cuser->buf_overrun))
- return -EFAULT;
- return 0;
case MGSL_IOCSGPIO:
return set_gpio(info, argp);
case MGSL_IOCGGPIO:
@@ -1117,6 +1096,33 @@ static int ioctl(struct tty_struct *tty, struct file *file,
return ret;
}
+static int get_icount(struct tty_struct *tty,
+ struct serial_icounter_struct *icount)
+
+{
+ struct slgt_info *info = tty->driver_data;
+ struct mgsl_icount cnow; /* kernel counter temps */
+ unsigned long flags;
+
+ spin_lock_irqsave(&info->lock,flags);
+ cnow = info->icount;
+ spin_unlock_irqrestore(&info->lock,flags);
+
+ icount->cts = cnow.cts;
+ icount->dsr = cnow.dsr;
+ icount->rng = cnow.rng;
+ icount->dcd = cnow.dcd;
+ icount->rx = cnow.rx;
+ icount->tx = cnow.tx;
+ icount->frame = cnow.frame;
+ icount->overrun = cnow.overrun;
+ icount->parity = cnow.parity;
+ icount->brk = cnow.brk;
+ icount->buf_overrun = cnow.buf_overrun;
+
+ return 0;
+}
+
/*
* support for 32 bit ioctl calls on 64 bit systems
*/
@@ -1206,10 +1212,6 @@ static long slgt_compat_ioctl(struct tty_struct *tty, struct file *file,
case MGSL_IOCSGPIO:
case MGSL_IOCGGPIO:
case MGSL_IOCWAITGPIO:
- case TIOCGICOUNT:
- rc = ioctl(tty, file, cmd, (unsigned long)(compat_ptr(arg)));
- break;
-
case MGSL_IOCSTXIDLE:
case MGSL_IOCTXENABLE:
case MGSL_IOCRXENABLE:
@@ -3642,6 +3644,7 @@ static const struct tty_operations ops = {
.hangup = hangup,
.tiocmget = tiocmget,
.tiocmset = tiocmset,
+ .get_icount = get_icount,
.proc_fops = &synclink_gt_proc_fops,
};
diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c
index e56caf7d82a..2f9eb4b0dec 100644
--- a/drivers/char/synclinkmp.c
+++ b/drivers/char/synclinkmp.c
@@ -1258,10 +1258,6 @@ static int ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
SLMP_INFO *info = tty->driver_data;
- int error;
- struct mgsl_icount cnow; /* kernel counter temps */
- struct serial_icounter_struct __user *p_cuser; /* user space */
- unsigned long flags;
void __user *argp = (void __user *)arg;
if (debug_level >= DEBUG_LEVEL_INFO)
@@ -1272,7 +1268,7 @@ static int ioctl(struct tty_struct *tty, struct file *file,
return -ENODEV;
if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
- (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
+ (cmd != TIOCMIWAIT)) {
if (tty->flags & (1 << TTY_IO_ERROR))
return -EIO;
}
@@ -1310,40 +1306,38 @@ static int ioctl(struct tty_struct *tty, struct file *file,
* NB: both 1->0 and 0->1 transitions are counted except for
* RI where only 0->1 is counted.
*/
- case TIOCGICOUNT:
- spin_lock_irqsave(&info->lock,flags);
- cnow = info->icount;
- spin_unlock_irqrestore(&info->lock,flags);
- p_cuser = argp;
- PUT_USER(error,cnow.cts, &p_cuser->cts);
- if (error) return error;
- PUT_USER(error,cnow.dsr, &p_cuser->dsr);
- if (error) return error;
- PUT_USER(error,cnow.rng, &p_cuser->rng);
- if (error) return error;
- PUT_USER(error,cnow.dcd, &p_cuser->dcd);
- if (error) return error;
- PUT_USER(error,cnow.rx, &p_cuser->rx);
- if (error) return error;
- PUT_USER(error,cnow.tx, &p_cuser->tx);
- if (error) return error;
- PUT_USER(error,cnow.frame, &p_cuser->frame);
- if (error) return error;
- PUT_USER(error,cnow.overrun, &p_cuser->overrun);
- if (error) return error;
- PUT_USER(error,cnow.parity, &p_cuser->parity);
- if (error) return error;
- PUT_USER(error,cnow.brk, &p_cuser->brk);
- if (error) return error;
- PUT_USER(error,cnow.buf_overrun, &p_cuser->buf_overrun);
- if (error) return error;
- return 0;
default:
return -ENOIOCTLCMD;
}
return 0;
}
+static int get_icount(struct tty_struct *tty,
+ struct serial_icounter_struct *icount)
+{
+ SLMP_INFO *info = tty->driver_data;
+ struct mgsl_icount cnow; /* kernel counter temps */
+ unsigned long flags;
+
+ spin_lock_irqsave(&info->lock,flags);
+ cnow = info->icount;
+ spin_unlock_irqrestore(&info->lock,flags);
+
+ icount->cts = cnow.cts;
+ icount->dsr = cnow.dsr;
+ icount->rng = cnow.rng;
+ icount->dcd = cnow.dcd;
+ icount->rx = cnow.rx;
+ icount->tx = cnow.tx;
+ icount->frame = cnow.frame;
+ icount->overrun = cnow.overrun;
+ icount->parity = cnow.parity;
+ icount->brk = cnow.brk;
+ icount->buf_overrun = cnow.buf_overrun;
+
+ return 0;
+}
+
/*
* /proc fs routines....
*/
@@ -3909,6 +3903,7 @@ static const struct tty_operations ops = {
.hangup = hangup,
.tiocmget = tiocmget,
.tiocmset = tiocmset,
+ .get_icount = get_icount,
.proc_fops = &synclinkmp_proc_fops,
};
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 613c852ee0f..c05c5af5aa0 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -96,6 +96,7 @@
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
+#include <linux/serial.h>
#include <linux/uaccess.h>
#include <asm/system.h>
@@ -183,6 +184,8 @@ struct tty_struct *alloc_tty_struct(void)
void free_tty_struct(struct tty_struct *tty)
{
+ if (tty->dev)
+ put_device(tty->dev);
kfree(tty->write_buf);
tty_buffer_free_all(tty);
kfree(tty);
@@ -194,12 +197,13 @@ static inline struct tty_struct *file_tty(struct file *file)
}
/* Associate a new file with the tty structure */
-void tty_add_file(struct tty_struct *tty, struct file *file)
+int tty_add_file(struct tty_struct *tty, struct file *file)
{
struct tty_file_private *priv;
- /* XXX: must implement proper error handling in callers */
- priv = kmalloc(sizeof(*priv), GFP_KERNEL|__GFP_NOFAIL);
+ priv = kmalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
priv->tty = tty;
priv->file = file;
@@ -208,6 +212,8 @@ void tty_add_file(struct tty_struct *tty, struct file *file)
spin_lock(&tty_files_lock);
list_add(&priv->list, &tty->tty_files);
spin_unlock(&tty_files_lock);
+
+ return 0;
}
/* Delete file from its tty */
@@ -1875,7 +1881,11 @@ got_driver:
return PTR_ERR(tty);
}
- tty_add_file(tty, filp);
+ retval = tty_add_file(tty, filp);
+ if (retval) {
+ tty_unlock();
+ return retval;
+ }
check_tty_count(tty, "tty_open");
if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
@@ -2502,6 +2512,20 @@ static int tty_tiocmset(struct tty_struct *tty, struct file *file, unsigned int
return tty->ops->tiocmset(tty, file, set, clear);
}
+static int tty_tiocgicount(struct tty_struct *tty, void __user *arg)
+{
+ int retval = -EINVAL;
+ struct serial_icounter_struct icount;
+ memset(&icount, 0, sizeof(icount));
+ if (tty->ops->get_icount)
+ retval = tty->ops->get_icount(tty, &icount);
+ if (retval != 0)
+ return retval;
+ if (copy_to_user(arg, &icount, sizeof(icount)))
+ return -EFAULT;
+ return 0;
+}
+
struct tty_struct *tty_pair_get_tty(struct tty_struct *tty)
{
if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
@@ -2622,6 +2646,12 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
case TIOCMBIC:
case TIOCMBIS:
return tty_tiocmset(tty, file, cmd, p);
+ case TIOCGICOUNT:
+ retval = tty_tiocgicount(tty, p);
+ /* For the moment allow fall through to the old method */
+ if (retval != -EINVAL)
+ return retval;
+ break;
case TCFLSH:
switch (arg) {
case TCIFLUSH:
@@ -2783,6 +2813,20 @@ void do_SAK(struct tty_struct *tty)
EXPORT_SYMBOL(do_SAK);
+static int dev_match_devt(struct device *dev, void *data)
+{
+ dev_t *devt = data;
+ return dev->devt == *devt;
+}
+
+/* Must put_device() after it's unused! */
+static struct device *tty_get_device(struct tty_struct *tty)
+{
+ dev_t devt = tty_devnum(tty);
+ return class_find_device(tty_class, NULL, &devt, dev_match_devt);
+}
+
+
/**
* initialize_tty_struct
* @tty: tty to initialize
@@ -2823,6 +2867,7 @@ void initialize_tty_struct(struct tty_struct *tty,
tty->ops = driver->ops;
tty->index = idx;
tty_line_name(driver, idx, tty->name);
+ tty->dev = tty_get_device(tty);
}
/**
@@ -2980,6 +3025,7 @@ int tty_register_driver(struct tty_driver *driver)
int i;
dev_t dev;
void **p = NULL;
+ struct device *d;
if (!(driver->flags & TTY_DRIVER_DEVPTS_MEM) && driver->num) {
p = kzalloc(driver->num * 2 * sizeof(void *), GFP_KERNEL);
@@ -3027,12 +3073,31 @@ int tty_register_driver(struct tty_driver *driver)
mutex_unlock(&tty_mutex);
if (!(driver->flags & TTY_DRIVER_DYNAMIC_DEV)) {
- for (i = 0; i < driver->num; i++)
- tty_register_device(driver, i, NULL);
+ for (i = 0; i < driver->num; i++) {
+ d = tty_register_device(driver, i, NULL);
+ if (IS_ERR(d)) {
+ error = PTR_ERR(d);
+ goto err;
+ }
+ }
}
proc_tty_register_driver(driver);
driver->flags |= TTY_DRIVER_INSTALLED;
return 0;
+
+err:
+ for (i--; i >= 0; i--)
+ tty_unregister_device(driver, i);
+
+ mutex_lock(&tty_mutex);
+ list_del(&driver->tty_drivers);
+ mutex_unlock(&tty_mutex);
+
+ unregister_chrdev_region(dev, driver->num);
+ driver->ttys = NULL;
+ driver->termios = NULL;
+ kfree(p);
+ return error;
}
EXPORT_SYMBOL(tty_register_driver);
diff --git a/drivers/char/ttyprintk.c b/drivers/char/ttyprintk.c
new file mode 100644
index 00000000000..c40c1612c8a
--- /dev/null
+++ b/drivers/char/ttyprintk.c
@@ -0,0 +1,225 @@
+/*
+ * linux/drivers/char/ttyprintk.c
+ *
+ * Copyright (C) 2010 Samo Pogacnik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the smems of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+/*
+ * This pseudo device allows user to make printk messages. It is possible
+ * to store "console" messages inline with kernel messages for better analyses
+ * of the boot process, for example.
+ */
+
+#include <linux/device.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+
+struct ttyprintk_port {
+ struct tty_port port;
+ struct mutex port_write_mutex;
+};
+
+static struct ttyprintk_port tpk_port;
+
+/*
+ * Our simple preformatting supports transparent output of (time-stamped)
+ * printk messages (also suitable for logging service):
+ * - any cr is replaced by nl
+ * - adds a ttyprintk source tag in front of each line
+ * - too long message is fragmeted, with '\'nl between fragments
+ * - TPK_STR_SIZE isn't really the write_room limiting factor, bcause
+ * it is emptied on the fly during preformatting.
+ */
+#define TPK_STR_SIZE 508 /* should be bigger then max expected line length */
+#define TPK_MAX_ROOM 4096 /* we could assume 4K for instance */
+static const char *tpk_tag = "[U] "; /* U for User */
+static int tpk_curr;
+
+static int tpk_printk(const unsigned char *buf, int count)
+{
+ static char tmp[TPK_STR_SIZE + 4];
+ int i = tpk_curr;
+
+ if (buf == NULL) {
+ /* flush tmp[] */
+ if (tpk_curr > 0) {
+ /* non nl or cr terminated message - add nl */
+ tmp[tpk_curr + 0] = '\n';
+ tmp[tpk_curr + 1] = '\0';
+ printk(KERN_INFO "%s%s", tpk_tag, tmp);
+ tpk_curr = 0;
+ }
+ return i;
+ }
+
+ for (i = 0; i < count; i++) {
+ tmp[tpk_curr] = buf[i];
+ if (tpk_curr < TPK_STR_SIZE) {
+ switch (buf[i]) {
+ case '\r':
+ /* replace cr with nl */
+ tmp[tpk_curr + 0] = '\n';
+ tmp[tpk_curr + 1] = '\0';
+ printk(KERN_INFO "%s%s", tpk_tag, tmp);
+ tpk_curr = 0;
+ if (buf[i + 1] == '\n')
+ i++;
+ break;
+ case '\n':
+ tmp[tpk_curr + 1] = '\0';
+ printk(KERN_INFO "%s%s", tpk_tag, tmp);
+ tpk_curr = 0;
+ break;
+ default:
+ tpk_curr++;
+ }
+ } else {
+ /* end of tmp buffer reached: cut the message in two */
+ tmp[tpk_curr + 1] = '\\';
+ tmp[tpk_curr + 2] = '\n';
+ tmp[tpk_curr + 3] = '\0';
+ printk(KERN_INFO "%s%s", tpk_tag, tmp);
+ tpk_curr = 0;
+ }
+ }
+
+ return count;
+}
+
+/*
+ * TTY operations open function.
+ */
+static int tpk_open(struct tty_struct *tty, struct file *filp)
+{
+ tty->driver_data = &tpk_port;
+
+ return tty_port_open(&tpk_port.port, tty, filp);
+}
+
+/*
+ * TTY operations close function.
+ */
+static void tpk_close(struct tty_struct *tty, struct file *filp)
+{
+ struct ttyprintk_port *tpkp = tty->driver_data;
+
+ mutex_lock(&tpkp->port_write_mutex);
+ /* flush tpk_printk buffer */
+ tpk_printk(NULL, 0);
+ mutex_unlock(&tpkp->port_write_mutex);
+
+ tty_port_close(&tpkp->port, tty, filp);
+}
+
+/*
+ * TTY operations write function.
+ */
+static int tpk_write(struct tty_struct *tty,
+ const unsigned char *buf, int count)
+{
+ struct ttyprintk_port *tpkp = tty->driver_data;
+ int ret;
+
+
+ /* exclusive use of tpk_printk within this tty */
+ mutex_lock(&tpkp->port_write_mutex);
+ ret = tpk_printk(buf, count);
+ mutex_unlock(&tpkp->port_write_mutex);
+
+ return ret;
+}
+
+/*
+ * TTY operations write_room function.
+ */
+static int tpk_write_room(struct tty_struct *tty)
+{
+ return TPK_MAX_ROOM;
+}
+
+/*
+ * TTY operations ioctl function.
+ */
+static int tpk_ioctl(struct tty_struct *tty, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ struct ttyprintk_port *tpkp = tty->driver_data;
+
+ if (!tpkp)
+ return -EINVAL;
+
+ switch (cmd) {
+ /* Stop TIOCCONS */
+ case TIOCCONS:
+ return -EOPNOTSUPP;
+ default:
+ return -ENOIOCTLCMD;
+ }
+ return 0;
+}
+
+static const struct tty_operations ttyprintk_ops = {
+ .open = tpk_open,
+ .close = tpk_close,
+ .write = tpk_write,
+ .write_room = tpk_write_room,
+ .ioctl = tpk_ioctl,
+};
+
+struct tty_port_operations null_ops = { };
+
+static struct tty_driver *ttyprintk_driver;
+
+static int __init ttyprintk_init(void)
+{
+ int ret = -ENOMEM;
+ void *rp;
+
+ ttyprintk_driver = alloc_tty_driver(1);
+ if (!ttyprintk_driver)
+ return ret;
+
+ ttyprintk_driver->owner = THIS_MODULE;
+ ttyprintk_driver->driver_name = "ttyprintk";
+ ttyprintk_driver->name = "ttyprintk";
+ ttyprintk_driver->major = TTYAUX_MAJOR;
+ ttyprintk_driver->minor_start = 3;
+ ttyprintk_driver->num = 1;
+ ttyprintk_driver->type = TTY_DRIVER_TYPE_CONSOLE;
+ ttyprintk_driver->init_termios = tty_std_termios;
+ ttyprintk_driver->init_termios.c_oflag = OPOST | OCRNL | ONOCR | ONLRET;
+ ttyprintk_driver->flags = TTY_DRIVER_RESET_TERMIOS |
+ TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+ tty_set_operations(ttyprintk_driver, &ttyprintk_ops);
+
+ ret = tty_register_driver(ttyprintk_driver);
+ if (ret < 0) {
+ printk(KERN_ERR "Couldn't register ttyprintk driver\n");
+ goto error;
+ }
+
+ /* create our unnumbered device */
+ rp = device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 3), NULL,
+ ttyprintk_driver->name);
+ if (IS_ERR(rp)) {
+ printk(KERN_ERR "Couldn't create ttyprintk device\n");
+ ret = PTR_ERR(rp);
+ goto error;
+ }
+
+ tty_port_init(&tpk_port.port);
+ tpk_port.port.ops = &null_ops;
+ mutex_init(&tpk_port.port_write_mutex);
+
+ return 0;
+
+error:
+ put_tty_driver(ttyprintk_driver);
+ ttyprintk_driver = NULL;
+ return ret;
+}
+module_init(ttyprintk_init);
diff --git a/drivers/char/vc_screen.c b/drivers/char/vc_screen.c
index bcce46c96b8..273ab44cc91 100644
--- a/drivers/char/vc_screen.c
+++ b/drivers/char/vc_screen.c
@@ -35,6 +35,12 @@
#include <linux/console.h>
#include <linux/device.h>
#include <linux/smp_lock.h>
+#include <linux/sched.h>
+#include <linux/fs.h>
+#include <linux/poll.h>
+#include <linux/signal.h>
+#include <linux/slab.h>
+#include <linux/notifier.h>
#include <asm/uaccess.h>
#include <asm/byteorder.h>
@@ -45,6 +51,86 @@
#undef addr
#define HEADER_SIZE 4
+struct vcs_poll_data {
+ struct notifier_block notifier;
+ unsigned int cons_num;
+ bool seen_last_update;
+ wait_queue_head_t waitq;
+ struct fasync_struct *fasync;
+};
+
+static int
+vcs_notifier(struct notifier_block *nb, unsigned long code, void *_param)
+{
+ struct vt_notifier_param *param = _param;
+ struct vc_data *vc = param->vc;
+ struct vcs_poll_data *poll =
+ container_of(nb, struct vcs_poll_data, notifier);
+ int currcons = poll->cons_num;
+
+ if (code != VT_UPDATE)
+ return NOTIFY_DONE;
+
+ if (currcons == 0)
+ currcons = fg_console;
+ else
+ currcons--;
+ if (currcons != vc->vc_num)
+ return NOTIFY_DONE;
+
+ poll->seen_last_update = false;
+ wake_up_interruptible(&poll->waitq);
+ kill_fasync(&poll->fasync, SIGIO, POLL_IN);
+ return NOTIFY_OK;
+}
+
+static void
+vcs_poll_data_free(struct vcs_poll_data *poll)
+{
+ unregister_vt_notifier(&poll->notifier);
+ kfree(poll);
+}
+
+static struct vcs_poll_data *
+vcs_poll_data_get(struct file *file)
+{
+ struct vcs_poll_data *poll = file->private_data;
+
+ if (poll)
+ return poll;
+
+ poll = kzalloc(sizeof(*poll), GFP_KERNEL);
+ if (!poll)
+ return NULL;
+ poll->cons_num = iminor(file->f_path.dentry->d_inode) & 127;
+ init_waitqueue_head(&poll->waitq);
+ poll->notifier.notifier_call = vcs_notifier;
+ if (register_vt_notifier(&poll->notifier) != 0) {
+ kfree(poll);
+ return NULL;
+ }
+
+ /*
+ * This code may be called either through ->poll() or ->fasync().
+ * If we have two threads using the same file descriptor, they could
+ * both enter this function, both notice that the structure hasn't
+ * been allocated yet and go ahead allocating it in parallel, but
+ * only one of them must survive and be shared otherwise we'd leak
+ * memory with a dangling notifier callback.
+ */
+ spin_lock(&file->f_lock);
+ if (!file->private_data) {
+ file->private_data = poll;
+ } else {
+ /* someone else raced ahead of us */
+ vcs_poll_data_free(poll);
+ poll = file->private_data;
+ }
+ spin_unlock(&file->f_lock);
+
+ return poll;
+}
+
static int
vcs_size(struct inode *inode)
{
@@ -102,6 +188,7 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
struct inode *inode = file->f_path.dentry->d_inode;
unsigned int currcons = iminor(inode);
struct vc_data *vc;
+ struct vcs_poll_data *poll;
long pos;
long viewed, attr, read;
int col, maxcol;
@@ -134,6 +221,9 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
ret = -EINVAL;
if (pos < 0)
goto unlock_out;
+ poll = file->private_data;
+ if (count && poll)
+ poll->seen_last_update = true;
read = 0;
ret = 0;
while (count) {
@@ -448,6 +538,8 @@ vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
}
*ppos += written;
ret = written;
+ if (written)
+ vcs_scr_updated(vc);
unlock_out:
release_console_sem();
@@ -457,6 +549,37 @@ unlock_out:
return ret;
}
+static unsigned int
+vcs_poll(struct file *file, poll_table *wait)
+{
+ struct vcs_poll_data *poll = vcs_poll_data_get(file);
+ int ret = 0;
+
+ if (poll) {
+ poll_wait(file, &poll->waitq, wait);
+ if (!poll->seen_last_update)
+ ret = POLLIN | POLLRDNORM;
+ }
+ return ret;
+}
+
+static int
+vcs_fasync(int fd, struct file *file, int on)
+{
+ struct vcs_poll_data *poll = file->private_data;
+
+ if (!poll) {
+ /* don't allocate anything if all we want is disable fasync */
+ if (!on)
+ return 0;
+ poll = vcs_poll_data_get(file);
+ if (!poll)
+ return -ENOMEM;
+ }
+
+ return fasync_helper(fd, file, on, &poll->fasync);
+}
+
static int
vcs_open(struct inode *inode, struct file *filp)
{
@@ -470,11 +593,23 @@ vcs_open(struct inode *inode, struct file *filp)
return ret;
}
+static int vcs_release(struct inode *inode, struct file *file)
+{
+ struct vcs_poll_data *poll = file->private_data;
+
+ if (poll)
+ vcs_poll_data_free(poll);
+ return 0;
+}
+
static const struct file_operations vcs_fops = {
.llseek = vcs_lseek,
.read = vcs_read,
.write = vcs_write,
+ .poll = vcs_poll,
+ .fasync = vcs_fasync,
.open = vcs_open,
+ .release = vcs_release,
};
static struct class *vc_class;
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index 281aada7b4a..a8ec48ed14d 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -4182,6 +4182,11 @@ void vcs_scr_writew(struct vc_data *vc, u16 val, u16 *org)
}
}
+void vcs_scr_updated(struct vc_data *vc)
+{
+ notify_update(vc);
+}
+
/*
* Visible symbols for modules
*/
diff --git a/drivers/input/serio/serport.c b/drivers/input/serio/serport.c
index 6d345112bcb..6e362de3f41 100644
--- a/drivers/input/serio/serport.c
+++ b/drivers/input/serio/serport.c
@@ -165,6 +165,7 @@ static ssize_t serport_ldisc_read(struct tty_struct * tty, struct file * file, u
serio->open = serport_serio_open;
serio->close = serport_serio_close;
serio->port_data = serport;
+ serio->dev.parent = tty->dev;
serio_register_port(serport->serio);
printk(KERN_INFO "serio: Serial port %s\n", tty_name(tty, name));
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index 1cd752f9a6e..b8e95724913 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -1645,11 +1645,11 @@ hso_wait_modem_status(struct hso_serial *serial, unsigned long arg)
* NB: both 1->0 and 0->1 transitions are counted except for
* RI where only 0->1 is counted.
*/
-static int hso_get_count(struct hso_serial *serial,
- struct serial_icounter_struct __user *icnt)
+static int hso_get_count(struct tty_struct *tty,
+ struct serial_icounter_struct *icount)
{
- struct serial_icounter_struct icount;
struct uart_icount cnow;
+ struct hso_serial *serial = get_serial_by_tty(tty);
struct hso_tiocmget *tiocmget = serial->tiocmget;
memset(&icount, 0, sizeof(struct serial_icounter_struct));
@@ -1660,19 +1660,19 @@ static int hso_get_count(struct hso_serial *serial,
memcpy(&cnow, &tiocmget->icount, sizeof(struct uart_icount));
spin_unlock_irq(&serial->serial_lock);
- icount.cts = cnow.cts;
- icount.dsr = cnow.dsr;
- icount.rng = cnow.rng;
- icount.dcd = cnow.dcd;
- icount.rx = cnow.rx;
- icount.tx = cnow.tx;
- icount.frame = cnow.frame;
- icount.overrun = cnow.overrun;
- icount.parity = cnow.parity;
- icount.brk = cnow.brk;
- icount.buf_overrun = cnow.buf_overrun;
+ icount->cts = cnow.cts;
+ icount->dsr = cnow.dsr;
+ icount->rng = cnow.rng;
+ icount->dcd = cnow.dcd;
+ icount->rx = cnow.rx;
+ icount->tx = cnow.tx;
+ icount->frame = cnow.frame;
+ icount->overrun = cnow.overrun;
+ icount->parity = cnow.parity;
+ icount->brk = cnow.brk;
+ icount->buf_overrun = cnow.buf_overrun;
- return copy_to_user(icnt, &icount, sizeof(icount)) ? -EFAULT : 0;
+ return 0;
}
@@ -1764,10 +1764,6 @@ static int hso_serial_ioctl(struct tty_struct *tty, struct file *file,
case TIOCMIWAIT:
ret = hso_wait_modem_status(serial, arg);
break;
-
- case TIOCGICOUNT:
- ret = hso_get_count(serial, uarg);
- break;
default:
ret = -ENOIOCTLCMD;
break;
@@ -3300,6 +3296,7 @@ static const struct tty_operations hso_serial_ops = {
.chars_in_buffer = hso_serial_chars_in_buffer,
.tiocmget = hso_serial_tiocmget,
.tiocmset = hso_serial_tiocmset,
+ .get_icount = hso_get_count,
.unthrottle = hso_unthrottle
};
diff --git a/drivers/serial/68360serial.c b/drivers/serial/68360serial.c
index 0dff3bbddc8..88b13356ec1 100644
--- a/drivers/serial/68360serial.c
+++ b/drivers/serial/68360serial.c
@@ -1381,6 +1381,30 @@ static void send_break(ser_info_t *info, unsigned int duration)
}
+/*
+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+ * Return: write counters to the user passed counter struct
+ * NB: both 1->0 and 0->1 transitions are counted except for
+ * RI where only 0->1 is counted.
+ */
+static int rs_360_get_icount(struct tty_struct *tty,
+ struct serial_icounter_struct *icount)
+{
+ ser_info_t *info = (ser_info_t *)tty->driver_data;
+ struct async_icount cnow;
+
+ local_irq_disable();
+ cnow = info->state->icount;
+ local_irq_enable();
+
+ icount->cts = cnow.cts;
+ icount->dsr = cnow.dsr;
+ icount->rng = cnow.rng;
+ icount->dcd = cnow.dcd;
+
+ return 0;
+}
+
static int rs_360_ioctl(struct tty_struct *tty, struct file * file,
unsigned int cmd, unsigned long arg)
{
@@ -1394,7 +1418,7 @@ static int rs_360_ioctl(struct tty_struct *tty, struct file * file,
if (serial_paranoia_check(info, tty->name, "rs_ioctl"))
return -ENODEV;
- if ((cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
+ if (cmd != TIOCMIWAIT) {
if (tty->flags & (1 << TTY_IO_ERROR))
return -EIO;
}
@@ -1477,31 +1501,6 @@ static int rs_360_ioctl(struct tty_struct *tty, struct file * file,
return 0;
#endif
- /*
- * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
- * Return: write counters to the user passed counter struct
- * NB: both 1->0 and 0->1 transitions are counted except for
- * RI where only 0->1 is counted.
- */
- case TIOCGICOUNT:
- local_irq_disable();
- cnow = info->state->icount;
- local_irq_enable();
- p_cuser = (struct serial_icounter_struct *) arg;
-/* error = put_user(cnow.cts, &p_cuser->cts); */
-/* if (error) return error; */
-/* error = put_user(cnow.dsr, &p_cuser->dsr); */
-/* if (error) return error; */
-/* error = put_user(cnow.rng, &p_cuser->rng); */
-/* if (error) return error; */
-/* error = put_user(cnow.dcd, &p_cuser->dcd); */
-/* if (error) return error; */
-
- put_user(cnow.cts, &p_cuser->cts);
- put_user(cnow.dsr, &p_cuser->dsr);
- put_user(cnow.rng, &p_cuser->rng);
- put_user(cnow.dcd, &p_cuser->dcd);
- return 0;
default:
return -ENOIOCTLCMD;
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 24110f6f61e..167c4a6ccbc 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -31,6 +31,7 @@
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/tty.h>
+#include <linux/ratelimit.h>
#include <linux/tty_flip.h>
#include <linux/serial_reg.h>
#include <linux/serial_core.h>
@@ -154,12 +155,6 @@ struct uart_8250_port {
unsigned char lsr_saved_flags;
#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
unsigned char msr_saved_flags;
-
- /*
- * We provide a per-port pm hook.
- */
- void (*pm)(struct uart_port *port,
- unsigned int state, unsigned int old);
};
struct irq_info {
@@ -1606,8 +1601,8 @@ static irqreturn_t serial8250_interrupt(int irq, void *dev_id)
if (l == i->head && pass_counter++ > PASS_LIMIT) {
/* If we hit this, we're dead. */
- printk(KERN_ERR "serial8250: too much work for "
- "irq%d\n", irq);
+ printk_ratelimited(KERN_ERR
+ "serial8250: too much work for irq%d\n", irq);
break;
}
} while (l != end);
@@ -1722,12 +1717,6 @@ static void serial_unlink_irq_chain(struct uart_8250_port *up)
mutex_unlock(&hash_mutex);
}
-/* Base timer interval for polling */
-static inline int poll_timeout(int timeout)
-{
- return timeout > 6 ? (timeout / 2 - 2) : 1;
-}
-
/*
* This function is used to handle ports that do not have an
* interrupt. This doesn't work very well for 16450's, but gives
@@ -1742,7 +1731,7 @@ static void serial8250_timeout(unsigned long data)
iir = serial_in(up, UART_IIR);
if (!(iir & UART_IIR_NO_INT))
serial8250_handle_port(up);
- mod_timer(&up->timer, jiffies + poll_timeout(up->port.timeout));
+ mod_timer(&up->timer, jiffies + uart_poll_timeout(&up->port));
}
static void serial8250_backup_timeout(unsigned long data)
@@ -1787,7 +1776,7 @@ static void serial8250_backup_timeout(unsigned long data)
/* Standard timer interval plus 0.2s to keep the port running */
mod_timer(&up->timer,
- jiffies + poll_timeout(up->port.timeout) + HZ / 5);
+ jiffies + uart_poll_timeout(&up->port) + HZ / 5);
}
static unsigned int serial8250_tx_empty(struct uart_port *port)
@@ -1867,15 +1856,17 @@ static void wait_for_xmitr(struct uart_8250_port *up, int bits)
unsigned int status, tmout = 10000;
/* Wait up to 10ms for the character(s) to be sent. */
- do {
+ for (;;) {
status = serial_in(up, UART_LSR);
up->lsr_saved_flags |= status & LSR_SAVE_FLAGS;
+ if ((status & bits) == bits)
+ break;
if (--tmout == 0)
break;
udelay(1);
- } while ((status & bits) != bits);
+ }
/* Wait up to 1s for flow control if necessary */
if (up->port.flags & UPF_CONS_FLOW) {
@@ -2069,7 +2060,7 @@ static int serial8250_startup(struct uart_port *port)
up->timer.function = serial8250_backup_timeout;
up->timer.data = (unsigned long)up;
mod_timer(&up->timer, jiffies +
- poll_timeout(up->port.timeout) + HZ / 5);
+ uart_poll_timeout(port) + HZ / 5);
}
/*
@@ -2079,7 +2070,7 @@ static int serial8250_startup(struct uart_port *port)
*/
if (!is_real_interrupt(up->port.irq)) {
up->timer.data = (unsigned long)up;
- mod_timer(&up->timer, jiffies + poll_timeout(up->port.timeout));
+ mod_timer(&up->timer, jiffies + uart_poll_timeout(port));
} else {
retval = serial_link_irq_chain(up);
if (retval)
@@ -2440,16 +2431,24 @@ serial8250_set_ldisc(struct uart_port *port, int new)
port->flags &= ~UPF_HARDPPS_CD;
}
-static void
-serial8250_pm(struct uart_port *port, unsigned int state,
- unsigned int oldstate)
+
+void serial8250_do_pm(struct uart_port *port, unsigned int state,
+ unsigned int oldstate)
{
struct uart_8250_port *p = (struct uart_8250_port *)port;
serial8250_set_sleep(p, state != 0);
+}
+EXPORT_SYMBOL(serial8250_do_pm);
- if (p->pm)
- p->pm(port, state, oldstate);
+static void
+serial8250_pm(struct uart_port *port, unsigned int state,
+ unsigned int oldstate)
+{
+ if (port->pm)
+ port->pm(port, state, oldstate);
+ else
+ serial8250_do_pm(port, state, oldstate);
}
static unsigned int serial8250_port_size(struct uart_8250_port *pt)
@@ -2674,6 +2673,16 @@ static struct uart_ops serial8250_pops = {
static struct uart_8250_port serial8250_ports[UART_NR];
+static void (*serial8250_isa_config)(int port, struct uart_port *up,
+ unsigned short *capabilities);
+
+void serial8250_set_isa_configurator(
+ void (*v)(int port, struct uart_port *up, unsigned short *capabilities))
+{
+ serial8250_isa_config = v;
+}
+EXPORT_SYMBOL(serial8250_set_isa_configurator);
+
static void __init serial8250_isa_init_ports(void)
{
struct uart_8250_port *up;
@@ -2719,6 +2728,9 @@ static void __init serial8250_isa_init_ports(void)
up->port.regshift = old_serial_port[i].iomem_reg_shift;
set_io_from_upio(&up->port);
up->port.irqflags |= irqflag;
+ if (serial8250_isa_config != NULL)
+ serial8250_isa_config(i, &up->port, &up->capabilities);
+
}
}
@@ -3010,6 +3022,7 @@ static int __devinit serial8250_probe(struct platform_device *dev)
port.serial_in = p->serial_in;
port.serial_out = p->serial_out;
port.set_termios = p->set_termios;
+ port.pm = p->pm;
port.dev = &dev->dev;
port.irqflags |= irqflag;
ret = serial8250_register_port(&port);
@@ -3176,6 +3189,12 @@ int serial8250_register_port(struct uart_port *port)
/* Possibly override set_termios call */
if (port->set_termios)
uart->port.set_termios = port->set_termios;
+ if (port->pm)
+ uart->port.pm = port->pm;
+
+ if (serial8250_isa_config != NULL)
+ serial8250_isa_config(0, &uart->port,
+ &uart->capabilities);
ret = uart_add_one_port(&serial8250_reg, &uart->port);
if (ret == 0)
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 3198c5335f0..92781648439 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -718,13 +718,6 @@ config SERIAL_MRST_MAX3110
the Intel Moorestown platform. On other systems use the max3100
driver.
-config MRST_MAX3110_IRQ
- boolean "Enable GPIO IRQ for Max3110 over Moorestown"
- default n
- depends on SERIAL_MRST_MAX3110 && GPIO_LANGWELL
- help
- This has to be enabled after Moorestown GPIO driver is loaded
-
config SERIAL_MFD_HSU
tristate "Medfield High Speed UART support"
depends on PCI
diff --git a/drivers/serial/altera_uart.c b/drivers/serial/altera_uart.c
index f8d8a00554d..721216292a5 100644
--- a/drivers/serial/altera_uart.c
+++ b/drivers/serial/altera_uart.c
@@ -15,6 +15,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/console.h>
@@ -27,6 +28,8 @@
#include <linux/altera_uart.h>
#define DRV_NAME "altera_uart"
+#define SERIAL_ALTERA_MAJOR 204
+#define SERIAL_ALTERA_MINOR 213
/*
* Altera UART register definitions according to the Nios UART datasheet:
@@ -76,13 +79,28 @@
*/
struct altera_uart {
struct uart_port port;
+ struct timer_list tmr;
unsigned int sigs; /* Local copy of line sigs */
unsigned short imr; /* Local IMR mirror */
};
+static u32 altera_uart_readl(struct uart_port *port, int reg)
+{
+ struct altera_uart_platform_uart *platp = port->private_data;
+
+ return readl(port->membase + (reg << platp->bus_shift));
+}
+
+static void altera_uart_writel(struct uart_port *port, u32 dat, int reg)
+{
+ struct altera_uart_platform_uart *platp = port->private_data;
+
+ writel(dat, port->membase + (reg << platp->bus_shift));
+}
+
static unsigned int altera_uart_tx_empty(struct uart_port *port)
{
- return (readl(port->membase + ALTERA_UART_STATUS_REG) &
+ return (altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
ALTERA_UART_STATUS_TMT_MSK) ? TIOCSER_TEMT : 0;
}
@@ -91,8 +109,7 @@ static unsigned int altera_uart_get_mctrl(struct uart_port *port)
struct altera_uart *pp = container_of(port, struct altera_uart, port);
unsigned int sigs;
- sigs =
- (readl(port->membase + ALTERA_UART_STATUS_REG) &
+ sigs = (altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
ALTERA_UART_STATUS_CTS_MSK) ? TIOCM_CTS : 0;
sigs |= (pp->sigs & TIOCM_RTS);
@@ -108,7 +125,7 @@ static void altera_uart_set_mctrl(struct uart_port *port, unsigned int sigs)
pp->imr |= ALTERA_UART_CONTROL_RTS_MSK;
else
pp->imr &= ~ALTERA_UART_CONTROL_RTS_MSK;
- writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
+ altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
}
static void altera_uart_start_tx(struct uart_port *port)
@@ -116,7 +133,7 @@ static void altera_uart_start_tx(struct uart_port *port)
struct altera_uart *pp = container_of(port, struct altera_uart, port);
pp->imr |= ALTERA_UART_CONTROL_TRDY_MSK;
- writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
+ altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
}
static void altera_uart_stop_tx(struct uart_port *port)
@@ -124,7 +141,7 @@ static void altera_uart_stop_tx(struct uart_port *port)
struct altera_uart *pp = container_of(port, struct altera_uart, port);
pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK;
- writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
+ altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
}
static void altera_uart_stop_rx(struct uart_port *port)
@@ -132,7 +149,7 @@ static void altera_uart_stop_rx(struct uart_port *port)
struct altera_uart *pp = container_of(port, struct altera_uart, port);
pp->imr &= ~ALTERA_UART_CONTROL_RRDY_MSK;
- writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
+ altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
}
static void altera_uart_break_ctl(struct uart_port *port, int break_state)
@@ -145,7 +162,7 @@ static void altera_uart_break_ctl(struct uart_port *port, int break_state)
pp->imr |= ALTERA_UART_CONTROL_TRBK_MSK;
else
pp->imr &= ~ALTERA_UART_CONTROL_TRBK_MSK;
- writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
+ altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
spin_unlock_irqrestore(&port->lock, flags);
}
@@ -168,7 +185,8 @@ static void altera_uart_set_termios(struct uart_port *port,
tty_termios_encode_baud_rate(termios, baud, baud);
spin_lock_irqsave(&port->lock, flags);
- writel(baudclk, port->membase + ALTERA_UART_DIVISOR_REG);
+ uart_update_timeout(port, termios->c_cflag, baud);
+ altera_uart_writel(port, baudclk, ALTERA_UART_DIVISOR_REG);
spin_unlock_irqrestore(&port->lock, flags);
}
@@ -178,14 +196,15 @@ static void altera_uart_rx_chars(struct altera_uart *pp)
unsigned char ch, flag;
unsigned short status;
- while ((status = readl(port->membase + ALTERA_UART_STATUS_REG)) &
+ while ((status = altera_uart_readl(port, ALTERA_UART_STATUS_REG)) &
ALTERA_UART_STATUS_RRDY_MSK) {
- ch = readl(port->membase + ALTERA_UART_RXDATA_REG);
+ ch = altera_uart_readl(port, ALTERA_UART_RXDATA_REG);
flag = TTY_NORMAL;
port->icount.rx++;
if (status & ALTERA_UART_STATUS_E_MSK) {
- writel(status, port->membase + ALTERA_UART_STATUS_REG);
+ altera_uart_writel(port, status,
+ ALTERA_UART_STATUS_REG);
if (status & ALTERA_UART_STATUS_BRK_MSK) {
port->icount.brk++;
@@ -225,18 +244,18 @@ static void altera_uart_tx_chars(struct altera_uart *pp)
if (port->x_char) {
/* Send special char - probably flow control */
- writel(port->x_char, port->membase + ALTERA_UART_TXDATA_REG);
+ altera_uart_writel(port, port->x_char, ALTERA_UART_TXDATA_REG);
port->x_char = 0;
port->icount.tx++;
return;
}
- while (readl(port->membase + ALTERA_UART_STATUS_REG) &
+ while (altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
ALTERA_UART_STATUS_TRDY_MSK) {
if (xmit->head == xmit->tail)
break;
- writel(xmit->buf[xmit->tail],
- port->membase + ALTERA_UART_TXDATA_REG);
+ altera_uart_writel(port, xmit->buf[xmit->tail],
+ ALTERA_UART_TXDATA_REG);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
port->icount.tx++;
}
@@ -246,7 +265,7 @@ static void altera_uart_tx_chars(struct altera_uart *pp)
if (xmit->head == xmit->tail) {
pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK;
- writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
+ altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
}
}
@@ -256,7 +275,7 @@ static irqreturn_t altera_uart_interrupt(int irq, void *data)
struct altera_uart *pp = container_of(port, struct altera_uart, port);
unsigned int isr;
- isr = readl(port->membase + ALTERA_UART_STATUS_REG) & pp->imr;
+ isr = altera_uart_readl(port, ALTERA_UART_STATUS_REG) & pp->imr;
spin_lock(&port->lock);
if (isr & ALTERA_UART_STATUS_RRDY_MSK)
@@ -268,14 +287,23 @@ static irqreturn_t altera_uart_interrupt(int irq, void *data)
return IRQ_RETVAL(isr);
}
+static void altera_uart_timer(unsigned long data)
+{
+ struct uart_port *port = (void *)data;
+ struct altera_uart *pp = container_of(port, struct altera_uart, port);
+
+ altera_uart_interrupt(0, port);
+ mod_timer(&pp->tmr, jiffies + uart_poll_timeout(port));
+}
+
static void altera_uart_config_port(struct uart_port *port, int flags)
{
port->type = PORT_ALTERA_UART;
/* Clear mask, so no surprise interrupts. */
- writel(0, port->membase + ALTERA_UART_CONTROL_REG);
+ altera_uart_writel(port, 0, ALTERA_UART_CONTROL_REG);
/* Clear status register */
- writel(0, port->membase + ALTERA_UART_STATUS_REG);
+ altera_uart_writel(port, 0, ALTERA_UART_STATUS_REG);
}
static int altera_uart_startup(struct uart_port *port)
@@ -284,6 +312,12 @@ static int altera_uart_startup(struct uart_port *port)
unsigned long flags;
int ret;
+ if (!port->irq) {
+ setup_timer(&pp->tmr, altera_uart_timer, (unsigned long)port);
+ mod_timer(&pp->tmr, jiffies + uart_poll_timeout(port));
+ return 0;
+ }
+
ret = request_irq(port->irq, altera_uart_interrupt, IRQF_DISABLED,
DRV_NAME, port);
if (ret) {
@@ -316,7 +350,10 @@ static void altera_uart_shutdown(struct uart_port *port)
spin_unlock_irqrestore(&port->lock, flags);
- free_irq(port->irq, port);
+ if (port->irq)
+ free_irq(port->irq, port);
+ else
+ del_timer_sync(&pp->tmr);
}
static const char *altera_uart_type(struct uart_port *port)
@@ -384,8 +421,9 @@ int __init early_altera_uart_setup(struct altera_uart_platform_uart *platp)
port->iotype = SERIAL_IO_MEM;
port->irq = platp[i].irq;
port->uartclk = platp[i].uartclk;
- port->flags = ASYNC_BOOT_AUTOCONF;
+ port->flags = UPF_BOOT_AUTOCONF;
port->ops = &altera_uart_ops;
+ port->private_data = platp;
}
return 0;
@@ -393,7 +431,7 @@ int __init early_altera_uart_setup(struct altera_uart_platform_uart *platp)
static void altera_uart_console_putc(struct uart_port *port, const char c)
{
- while (!(readl(port->membase + ALTERA_UART_STATUS_REG) &
+ while (!(altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
ALTERA_UART_STATUS_TRDY_MSK))
cpu_relax();
@@ -423,7 +461,7 @@ static int __init altera_uart_console_setup(struct console *co, char *options)
if (co->index < 0 || co->index >= CONFIG_SERIAL_ALTERA_UART_MAXPORTS)
return -EINVAL;
port = &altera_uart_ports[co->index].port;
- if (port->membase == 0)
+ if (!port->membase)
return -ENODEV;
if (options)
@@ -435,7 +473,7 @@ static int __init altera_uart_console_setup(struct console *co, char *options)
static struct uart_driver altera_uart_driver;
static struct console altera_uart_console = {
- .name = "ttyS",
+ .name = "ttyAL",
.write = altera_uart_console_write,
.device = uart_console_device,
.setup = altera_uart_console_setup,
@@ -466,9 +504,9 @@ console_initcall(altera_uart_console_init);
static struct uart_driver altera_uart_driver = {
.owner = THIS_MODULE,
.driver_name = DRV_NAME,
- .dev_name = "ttyS",
- .major = TTY_MAJOR,
- .minor = 64,
+ .dev_name = "ttyAL",
+ .major = SERIAL_ALTERA_MAJOR,
+ .minor = SERIAL_ALTERA_MINOR,
.nr = CONFIG_SERIAL_ALTERA_UART_MAXPORTS,
.cons = ALTERA_UART_CONSOLE,
};
@@ -477,38 +515,55 @@ static int __devinit altera_uart_probe(struct platform_device *pdev)
{
struct altera_uart_platform_uart *platp = pdev->dev.platform_data;
struct uart_port *port;
- int i;
+ struct resource *res_mem;
+ struct resource *res_irq;
+ int i = pdev->id;
- for (i = 0; i < CONFIG_SERIAL_ALTERA_UART_MAXPORTS && platp[i].mapbase; i++) {
- port = &altera_uart_ports[i].port;
+ /* -1 emphasizes that the platform must have one port, no .N suffix */
+ if (i == -1)
+ i = 0;
- port->line = i;
- port->type = PORT_ALTERA_UART;
- port->mapbase = platp[i].mapbase;
- port->membase = ioremap(port->mapbase, ALTERA_UART_SIZE);
- port->iotype = SERIAL_IO_MEM;
- port->irq = platp[i].irq;
- port->uartclk = platp[i].uartclk;
- port->ops = &altera_uart_ops;
- port->flags = ASYNC_BOOT_AUTOCONF;
+ if (i >= CONFIG_SERIAL_ALTERA_UART_MAXPORTS)
+ return -EINVAL;
- uart_add_one_port(&altera_uart_driver, port);
- }
+ port = &altera_uart_ports[i].port;
+
+ res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res_mem)
+ port->mapbase = res_mem->start;
+ else if (platp->mapbase)
+ port->mapbase = platp->mapbase;
+ else
+ return -EINVAL;
+
+ res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (res_irq)
+ port->irq = res_irq->start;
+ else if (platp->irq)
+ port->irq = platp->irq;
+
+ port->membase = ioremap(port->mapbase, ALTERA_UART_SIZE);
+ if (!port->membase)
+ return -ENOMEM;
+
+ port->line = i;
+ port->type = PORT_ALTERA_UART;
+ port->iotype = SERIAL_IO_MEM;
+ port->uartclk = platp->uartclk;
+ port->ops = &altera_uart_ops;
+ port->flags = UPF_BOOT_AUTOCONF;
+ port->private_data = platp;
+
+ uart_add_one_port(&altera_uart_driver, port);
return 0;
}
static int __devexit altera_uart_remove(struct platform_device *pdev)
{
- struct uart_port *port;
- int i;
-
- for (i = 0; i < CONFIG_SERIAL_ALTERA_UART_MAXPORTS; i++) {
- port = &altera_uart_ports[i].port;
- if (port)
- uart_remove_one_port(&altera_uart_driver, port);
- }
+ struct uart_port *port = &altera_uart_ports[pdev->id].port;
+ uart_remove_one_port(&altera_uart_driver, port);
return 0;
}
@@ -550,3 +605,4 @@ MODULE_DESCRIPTION("Altera UART driver");
MODULE_AUTHOR("Thomas Chou <thomas@wytron.com.tw>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:" DRV_NAME);
+MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_ALTERA_MAJOR);
diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c
index 5318dd3774a..6f1b51e231e 100644
--- a/drivers/serial/bfin_sport_uart.c
+++ b/drivers/serial/bfin_sport_uart.c
@@ -131,7 +131,12 @@ static int sport_uart_setup(struct sport_uart_port *up, int size, int baud_rate)
pr_debug("%s RCR1:%x, RCR2:%x\n", __func__, SPORT_GET_RCR1(up), SPORT_GET_RCR2(up));
tclkdiv = sclk / (2 * baud_rate) - 1;
- rclkdiv = sclk / (2 * baud_rate * 2) - 1;
+ /* The actual uart baud rate of devices vary between +/-2%. The sport
+ * RX sample rate should be faster than the double of the worst case,
+ * otherwise, wrong data are received. So, set sport RX clock to be
+ * 3% faster.
+ */
+ rclkdiv = sclk / (2 * baud_rate * 2 * 97 / 100) - 1;
SPORT_PUT_TCLKDIV(up, tclkdiv);
SPORT_PUT_RCLKDIV(up, rclkdiv);
SSYNC();
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 66ecc7ab6da..dfcf4b1878a 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -327,14 +327,13 @@ static inline void imx_transmit_buffer(struct imx_port *sport)
{
struct circ_buf *xmit = &sport->port.state->xmit;
- while (!(readl(sport->port.membase + UTS) & UTS_TXFULL)) {
+ while (!uart_circ_empty(xmit) &&
+ !(readl(sport->port.membase + UTS) & UTS_TXFULL)) {
/* send xmit->buf[xmit->tail]
* out the port here */
writel(xmit->buf[xmit->tail], sport->port.membase + URTX0);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
sport->port.icount.tx++;
- if (uart_circ_empty(xmit))
- break;
}
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c
index eaf54501411..18f548449c6 100644
--- a/drivers/serial/jsm/jsm_driver.c
+++ b/drivers/serial/jsm/jsm_driver.c
@@ -172,13 +172,15 @@ static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device
jsm_uart_port_init here! */
dev_err(&pdev->dev, "memory allocation for flipbuf failed\n");
rc = -ENOMEM;
- goto out_free_irq;
+ goto out_free_uart;
}
pci_set_drvdata(pdev, brd);
pci_save_state(pdev);
return 0;
+ out_free_uart:
+ jsm_remove_uart_port(brd);
out_free_irq:
jsm_remove_uart_port(brd);
free_irq(brd->irq, brd);
diff --git a/drivers/serial/max3107.c b/drivers/serial/max3107.c
index 67283c1a57f..910870edf70 100644
--- a/drivers/serial/max3107.c
+++ b/drivers/serial/max3107.c
@@ -986,12 +986,14 @@ int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata)
s->rxbuf = kzalloc(sizeof(u16) * (MAX3107_RX_FIFO_SIZE+2), GFP_KERNEL);
if (!s->rxbuf) {
pr_err("Allocating RX buffer failed\n");
- return -ENOMEM;
+ retval = -ENOMEM;
+ goto err_free4;
}
s->rxstr = kzalloc(sizeof(u8) * MAX3107_RX_FIFO_SIZE, GFP_KERNEL);
if (!s->rxstr) {
pr_err("Allocating RX buffer failed\n");
- return -ENOMEM;
+ retval = -ENOMEM;
+ goto err_free3;
}
/* SPI Tx buffer
* SPI transfer buffer
@@ -1002,7 +1004,8 @@ int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata)
s->txbuf = kzalloc(sizeof(u16) * MAX3107_TX_FIFO_SIZE + 3, GFP_KERNEL);
if (!s->txbuf) {
pr_err("Allocating TX buffer failed\n");
- return -ENOMEM;
+ retval = -ENOMEM;
+ goto err_free2;
}
/* Initialize shared data lock */
spin_lock_init(&s->data_lock);
@@ -1021,13 +1024,15 @@ int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata)
buf[0] = MAX3107_REVID_REG;
if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) {
dev_err(&s->spi->dev, "SPI transfer for REVID read failed\n");
- return -EIO;
+ retval = -EIO;
+ goto err_free1;
}
if ((buf[0] & MAX3107_SPI_RX_DATA_MASK) != MAX3107_REVID1 &&
(buf[0] & MAX3107_SPI_RX_DATA_MASK) != MAX3107_REVID2) {
dev_err(&s->spi->dev, "REVID %x does not match\n",
(buf[0] & MAX3107_SPI_RX_DATA_MASK));
- return -ENODEV;
+ retval = -ENODEV;
+ goto err_free1;
}
/* Disable all interrupts */
@@ -1047,7 +1052,8 @@ int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata)
/* Perform SPI transfer */
if (max3107_rw(s, (u8 *)buf, NULL, 4)) {
dev_err(&s->spi->dev, "SPI transfer for init failed\n");
- return -EIO;
+ retval = -EIO;
+ goto err_free1;
}
/* Register UART driver */
@@ -1055,7 +1061,7 @@ int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata)
retval = uart_register_driver(&max3107_uart_driver);
if (retval) {
dev_err(&s->spi->dev, "Registering UART driver failed\n");
- return retval;
+ goto err_free1;
}
driver_registered = 1;
}
@@ -1074,13 +1080,13 @@ int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata)
retval = uart_add_one_port(&max3107_uart_driver, &s->port);
if (retval < 0) {
dev_err(&s->spi->dev, "Adding UART port failed\n");
- return retval;
+ goto err_free1;
}
if (pdata->configure) {
retval = pdata->configure(s);
if (retval < 0)
- return retval;
+ goto err_free1;
}
/* Go to suspend mode */
@@ -1088,6 +1094,16 @@ int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata)
pdata->hw_suspend(s, 1);
return 0;
+
+err_free1:
+ kfree(s->txbuf);
+err_free2:
+ kfree(s->rxstr);
+err_free3:
+ kfree(s->rxbuf);
+err_free4:
+ kfree(s);
+ return retval;
}
EXPORT_SYMBOL_GPL(max3107_probe);
diff --git a/drivers/serial/mfd.c b/drivers/serial/mfd.c
index dc0967fb9ea..5fc699e929d 100644
--- a/drivers/serial/mfd.c
+++ b/drivers/serial/mfd.c
@@ -172,6 +172,9 @@ static ssize_t port_show_regs(struct file *file, char __user *user_buf,
len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
"DIV: \t\t0x%08x\n", serial_in(up, UART_DIV));
+ if (len > HSU_REGS_BUFSIZE)
+ len = HSU_REGS_BUFSIZE;
+
ret = simple_read_from_buffer(user_buf, count, ppos, buf, len);
kfree(buf);
return ret;
@@ -219,6 +222,9 @@ static ssize_t dma_show_regs(struct file *file, char __user *user_buf,
len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
"D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D3TSR));
+ if (len > HSU_REGS_BUFSIZE)
+ len = HSU_REGS_BUFSIZE;
+
ret = simple_read_from_buffer(user_buf, count, ppos, buf, len);
kfree(buf);
return ret;
@@ -925,39 +931,52 @@ serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios,
cval |= UART_LCR_EPAR;
/*
+ * The base clk is 50Mhz, and the baud rate come from:
+ * baud = 50M * MUL / (DIV * PS * DLAB)
+ *
* For those basic low baud rate we can get the direct
- * scalar from 2746800, like 115200 = 2746800/24, for those
- * higher baud rate, we have to handle them case by case,
- * but DIV reg is never touched as its default value 0x3d09
+ * scalar from 2746800, like 115200 = 2746800/24. For those
+ * higher baud rate, we handle them case by case, mainly by
+ * adjusting the MUL/PS registers, and DIV register is kept
+ * as default value 0x3d09 to make things simple
*/
baud = uart_get_baud_rate(port, termios, old, 0, 4000000);
- quot = uart_get_divisor(port, baud);
+ quot = 1;
switch (baud) {
case 3500000:
mul = 0x3345;
ps = 0xC;
- quot = 1;
+ break;
+ case 3000000:
+ mul = 0x2EE0;
break;
case 2500000:
mul = 0x2710;
- ps = 0x10;
- quot = 1;
break;
- case 18432000:
+ case 2000000:
+ mul = 0x1F40;
+ break;
+ case 1843200:
mul = 0x2400;
- ps = 0x10;
- quot = 1;
break;
case 1500000:
- mul = 0x1D4C;
- ps = 0xc;
- quot = 1;
+ mul = 0x1770;
+ break;
+ case 1000000:
+ mul = 0xFA0;
+ break;
+ case 500000:
+ mul = 0x7D0;
break;
default:
- ;
+ /* Use uart_get_divisor to get quot for other baud rates */
+ quot = 0;
}
+ if (!quot)
+ quot = uart_get_divisor(port, baud);
+
if ((up->port.uartclk / quot) < (2400 * 16))
fcr = UART_FCR_ENABLE_FIFO | UART_FCR_HSU_64_1B;
else if ((up->port.uartclk / quot) < (230400 * 16))
diff --git a/drivers/serial/mrst_max3110.c b/drivers/serial/mrst_max3110.c
index 51c15f58e01..b62857bf2fd 100644
--- a/drivers/serial/mrst_max3110.c
+++ b/drivers/serial/mrst_max3110.c
@@ -1,7 +1,7 @@
/*
- * max3110.c - spi uart protocol driver for Maxim 3110 on Moorestown
+ * mrst_max3110.c - spi uart protocol driver for Maxim 3110
*
- * Copyright (C) Intel 2008 Feng Tang <feng.tang@intel.com>
+ * Copyright (c) 2008-2010, Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
@@ -32,18 +32,13 @@
#include <linux/irq.h>
#include <linux/init.h>
#include <linux/console.h>
-#include <linux/sysrq.h>
-#include <linux/platform_device.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
#include <linux/serial_reg.h>
#include <linux/kthread.h>
-#include <linux/delay.h>
-#include <asm/atomic.h>
#include <linux/spi/spi.h>
-#include <linux/spi/dw_spi.h>
#include "mrst_max3110.h"
@@ -56,7 +51,7 @@
struct uart_max3110 {
struct uart_port port;
struct spi_device *spi;
- char *name;
+ char name[24];
wait_queue_head_t wq;
struct task_struct *main_thread;
@@ -67,35 +62,30 @@ struct uart_max3110 {
u16 cur_conf;
u8 clock;
u8 parity, word_7bits;
+ u16 irq;
unsigned long uart_flags;
/* console related */
struct circ_buf con_xmit;
-
- /* irq related */
- u16 irq;
};
/* global data structure, may need be removed */
-struct uart_max3110 *pmax;
-static inline void receive_char(struct uart_max3110 *max, u8 ch);
+static struct uart_max3110 *pmax;
+
static void receive_chars(struct uart_max3110 *max,
unsigned char *str, int len);
-static int max3110_read_multi(struct uart_max3110 *max, int len, u8 *buf);
-static void max3110_console_receive(struct uart_max3110 *max);
+static int max3110_read_multi(struct uart_max3110 *max, u8 *buf);
+static void max3110_con_receive(struct uart_max3110 *max);
-int max3110_write_then_read(struct uart_max3110 *max,
- const u8 *txbuf, u8 *rxbuf, unsigned len, int always_fast)
+static int max3110_write_then_read(struct uart_max3110 *max,
+ const void *txbuf, void *rxbuf, unsigned len, int always_fast)
{
struct spi_device *spi = max->spi;
struct spi_message message;
struct spi_transfer x;
int ret;
- if (!txbuf || !rxbuf)
- return -EINVAL;
-
spi_message_init(&message);
memset(&x, 0, sizeof x);
x.len = len;
@@ -104,7 +94,7 @@ int max3110_write_then_read(struct uart_max3110 *max,
spi_message_add_tail(&x, &message);
if (always_fast)
- x.speed_hz = 3125000;
+ x.speed_hz = spi->max_speed_hz;
else if (max->baud)
x.speed_hz = max->baud;
@@ -113,58 +103,80 @@ int max3110_write_then_read(struct uart_max3110 *max,
return ret;
}
-/* Write a u16 to the device, and return one u16 read back */
-int max3110_out(struct uart_max3110 *max, const u16 out)
+/* Write a 16b word to the device */
+static int max3110_out(struct uart_max3110 *max, const u16 out)
{
- u16 tmp;
+ void *buf;
+ u16 *obuf, *ibuf;
+ u8 ch;
int ret;
- ret = max3110_write_then_read(max, (u8 *)&out, (u8 *)&tmp, 2, 1);
- if (ret)
- return ret;
+ buf = kzalloc(8, GFP_KERNEL | GFP_DMA);
+ if (!buf)
+ return -ENOMEM;
+
+ obuf = buf;
+ ibuf = buf + 4;
+ *obuf = out;
+ ret = max3110_write_then_read(max, obuf, ibuf, 2, 1);
+ if (ret) {
+ pr_warning(PR_FMT "%s(): get err msg %d when sending 0x%x\n",
+ __func__, ret, out);
+ goto exit;
+ }
/* If some valid data is read back */
- if (tmp & MAX3110_READ_DATA_AVAILABLE)
- receive_char(max, (tmp & 0xff));
+ if (*ibuf & MAX3110_READ_DATA_AVAILABLE) {
+ ch = *ibuf & 0xff;
+ receive_chars(max, &ch, 1);
+ }
+exit:
+ kfree(buf);
return ret;
}
-#define MAX_READ_LEN 20
/*
* This is usually used to read data from SPIC RX FIFO, which doesn't
- * need any delay like flushing character out. It returns how many
- * valide bytes are read back
+ * need any delay like flushing character out.
+ *
+ * Return how many valide bytes are read back
*/
-static int max3110_read_multi(struct uart_max3110 *max, int len, u8 *buf)
+static int max3110_read_multi(struct uart_max3110 *max, u8 *rxbuf)
{
- u16 out[MAX_READ_LEN], in[MAX_READ_LEN];
- u8 *pbuf, valid_str[MAX_READ_LEN];
- int i, j, bytelen;
+ void *buf;
+ u16 *obuf, *ibuf;
+ u8 *pbuf, valid_str[M3110_RX_FIFO_DEPTH];
+ int i, j, blen;
- if (len > MAX_READ_LEN) {
- pr_err(PR_FMT "read len %d is too large\n", len);
+ blen = M3110_RX_FIFO_DEPTH * sizeof(u16);
+ buf = kzalloc(blen * 2, GFP_KERNEL | GFP_DMA);
+ if (!buf) {
+ pr_warning(PR_FMT "%s(): fail to alloc dma buffer\n", __func__);
return 0;
}
- bytelen = len * 2;
- memset(out, 0, bytelen);
- memset(in, 0, bytelen);
+ /* tx/rx always have the same length */
+ obuf = buf;
+ ibuf = buf + blen;
- if (max3110_write_then_read(max, (u8 *)out, (u8 *)in, bytelen, 1))
+ if (max3110_write_then_read(max, obuf, ibuf, blen, 1)) {
+ kfree(buf);
return 0;
+ }
- /* If caller don't provide a buffer, then handle received char */
- pbuf = buf ? buf : valid_str;
+ /* If caller doesn't provide a buffer, then handle received char */
+ pbuf = rxbuf ? rxbuf : valid_str;
- for (i = 0, j = 0; i < len; i++) {
- if (in[i] & MAX3110_READ_DATA_AVAILABLE)
- pbuf[j++] = (u8)(in[i] & 0xff);
+ for (i = 0, j = 0; i < M3110_RX_FIFO_DEPTH; i++) {
+ if (ibuf[i] & MAX3110_READ_DATA_AVAILABLE)
+ pbuf[j++] = ibuf[i] & 0xff;
}
if (j && (pbuf == valid_str))
receive_chars(max, valid_str, j);
+ kfree(buf);
return j;
}
@@ -178,10 +190,6 @@ static void serial_m3110_con_putchar(struct uart_port *port, int ch)
xmit->buf[xmit->head] = (char)ch;
xmit->head = (xmit->head + 1) & (PAGE_SIZE - 1);
}
-
-
- if (!test_and_set_bit(CON_TX_NEEDED, &max->uart_flags))
- wake_up_process(max->main_thread);
}
/*
@@ -197,6 +205,9 @@ static void serial_m3110_con_write(struct console *co,
return;
uart_console_write(&pmax->port, s, count, serial_m3110_con_putchar);
+
+ if (!test_and_set_bit(CON_TX_NEEDED, &pmax->uart_flags))
+ wake_up_process(pmax->main_thread);
}
static int __init
@@ -210,6 +221,9 @@ serial_m3110_con_setup(struct console *co, char *options)
pr_info(PR_FMT "setting up console\n");
+ if (co->index == -1)
+ co->index = 0;
+
if (!max) {
pr_err(PR_FMT "pmax is NULL, return");
return -ENODEV;
@@ -240,8 +254,6 @@ static struct console serial_m3110_console = {
.data = &serial_m3110_reg,
};
-#define MRST_CONSOLE (&serial_m3110_console)
-
static unsigned int serial_m3110_tx_empty(struct uart_port *port)
{
return 1;
@@ -259,32 +271,44 @@ static void serial_m3110_stop_rx(struct uart_port *port)
}
#define WORDS_PER_XFER 128
-static inline void send_circ_buf(struct uart_max3110 *max,
+static void send_circ_buf(struct uart_max3110 *max,
struct circ_buf *xmit)
{
- int len, left = 0;
- u16 obuf[WORDS_PER_XFER], ibuf[WORDS_PER_XFER];
+ void *buf;
+ u16 *obuf, *ibuf;
u8 valid_str[WORDS_PER_XFER];
- int i, j;
+ int i, j, len, blen, dma_size, left, ret = 0;
+
+
+ dma_size = WORDS_PER_XFER * sizeof(u16) * 2;
+ buf = kzalloc(dma_size, GFP_KERNEL | GFP_DMA);
+ if (!buf)
+ return;
+ obuf = buf;
+ ibuf = buf + dma_size/2;
while (!uart_circ_empty(xmit)) {
left = uart_circ_chars_pending(xmit);
while (left) {
- len = (left >= WORDS_PER_XFER) ? WORDS_PER_XFER : left;
+ len = min(left, WORDS_PER_XFER);
+ blen = len * sizeof(u16);
+ memset(ibuf, 0, blen);
- memset(obuf, 0, len * 2);
- memset(ibuf, 0, len * 2);
for (i = 0; i < len; i++) {
obuf[i] = (u8)xmit->buf[xmit->tail] | WD_TAG;
xmit->tail = (xmit->tail + 1) &
(UART_XMIT_SIZE - 1);
}
- max3110_write_then_read(max, (u8 *)obuf,
- (u8 *)ibuf, len * 2, 0);
+
+ /* Fail to send msg to console is not very critical */
+ ret = max3110_write_then_read(max, obuf, ibuf, blen, 0);
+ if (ret)
+ pr_warning(PR_FMT "%s(): get err msg %d\n",
+ __func__, ret);
for (i = 0, j = 0; i < len; i++) {
if (ibuf[i] & MAX3110_READ_DATA_AVAILABLE)
- valid_str[j++] = (u8)(ibuf[i] & 0xff);
+ valid_str[j++] = ibuf[i] & 0xff;
}
if (j)
@@ -294,6 +318,8 @@ static inline void send_circ_buf(struct uart_max3110 *max,
left -= len;
}
}
+
+ kfree(buf);
}
static void transmit_char(struct uart_max3110 *max)
@@ -313,8 +339,10 @@ static void transmit_char(struct uart_max3110 *max)
serial_m3110_stop_tx(port);
}
-/* This will be called by uart_write() and tty_write, can't
- * go to sleep */
+/*
+ * This will be called by uart_write() and tty_write, can't
+ * go to sleep
+ */
static void serial_m3110_start_tx(struct uart_port *port)
{
struct uart_max3110 *max =
@@ -336,7 +364,7 @@ static void receive_chars(struct uart_max3110 *max, unsigned char *str, int len)
tty = port->state->port.tty;
if (!tty)
- return; /* receive some char before the tty is opened */
+ return;
while (len) {
usable = tty_buffer_request_room(tty, len);
@@ -344,32 +372,37 @@ static void receive_chars(struct uart_max3110 *max, unsigned char *str, int len)
tty_insert_flip_string(tty, str, usable);
str += usable;
port->icount.rx += usable;
- tty_flip_buffer_push(tty);
}
len -= usable;
}
+ tty_flip_buffer_push(tty);
}
-static inline void receive_char(struct uart_max3110 *max, u8 ch)
-{
- receive_chars(max, &ch, 1);
-}
-
-static void max3110_console_receive(struct uart_max3110 *max)
+/*
+ * This routine will be used in read_thread or RX IRQ handling,
+ * it will first do one round buffer read(8 words), if there is some
+ * valid RX data, will try to read 5 more rounds till all data
+ * is read out.
+ *
+ * Use stack space as data buffer to save some system load, and chose
+ * 504 Btyes as a threadhold to do a bulk push to upper tty layer when
+ * receiving bulk data, a much bigger buffer may cause stack overflow
+ */
+static void max3110_con_receive(struct uart_max3110 *max)
{
int loop = 1, num, total = 0;
u8 recv_buf[512], *pbuf;
pbuf = recv_buf;
do {
- num = max3110_read_multi(max, 8, pbuf);
+ num = max3110_read_multi(max, pbuf);
if (num) {
- loop = 10;
+ loop = 5;
pbuf += num;
total += num;
- if (total >= 500) {
+ if (total >= 504) {
receive_chars(max, recv_buf, total);
pbuf = recv_buf;
total = 0;
@@ -397,7 +430,7 @@ static int max3110_main_thread(void *_max)
mutex_lock(&max->thread_mutex);
if (test_and_clear_bit(BIT_IRQ_PENDING, &max->uart_flags))
- max3110_console_receive(max);
+ max3110_con_receive(max);
/* first handle console output */
if (test_and_clear_bit(CON_TX_NEEDED, &max->uart_flags))
@@ -414,7 +447,6 @@ static int max3110_main_thread(void *_max)
return ret;
}
-#ifdef CONFIG_MRST_MAX3110_IRQ
static irqreturn_t serial_m3110_irq(int irq, void *dev_id)
{
struct uart_max3110 *max = dev_id;
@@ -426,7 +458,7 @@ static irqreturn_t serial_m3110_irq(int irq, void *dev_id)
return IRQ_HANDLED;
}
-#else
+
/* if don't use RX IRQ, then need a thread to polling read */
static int max3110_read_thread(void *_max)
{
@@ -434,9 +466,14 @@ static int max3110_read_thread(void *_max)
pr_info(PR_FMT "start read thread\n");
do {
- mutex_lock(&max->thread_mutex);
- max3110_console_receive(max);
- mutex_unlock(&max->thread_mutex);
+ /*
+ * If can't acquire the mutex, it means the main thread
+ * is running which will also perform the rx job
+ */
+ if (mutex_trylock(&max->thread_mutex)) {
+ max3110_con_receive(max);
+ mutex_unlock(&max->thread_mutex);
+ }
set_current_state(TASK_INTERRUPTIBLE);
schedule_timeout(HZ / 20);
@@ -444,7 +481,6 @@ static int max3110_read_thread(void *_max)
return 0;
}
-#endif
static int serial_m3110_startup(struct uart_port *port)
{
@@ -453,33 +489,54 @@ static int serial_m3110_startup(struct uart_port *port)
u16 config = 0;
int ret = 0;
- if (port->line != 0)
+ if (port->line != 0) {
pr_err(PR_FMT "uart port startup failed\n");
+ return -1;
+ }
- /* firstly disable all IRQ and config it to 115200, 8n1 */
+ /* Disable all IRQ and config it to 115200, 8n1 */
config = WC_TAG | WC_FIFO_ENABLE
| WC_1_STOPBITS
| WC_8BIT_WORD
| WC_BAUD_DR2;
- ret = max3110_out(max, config);
/* as we use thread to handle tx/rx, need set low latency */
port->state->port.tty->low_latency = 1;
-#ifdef CONFIG_MRST_MAX3110_IRQ
- ret = request_irq(max->irq, serial_m3110_irq,
+ if (max->irq) {
+ max->read_thread = NULL;
+ ret = request_irq(max->irq, serial_m3110_irq,
IRQ_TYPE_EDGE_FALLING, "max3110", max);
- if (ret)
- return ret;
+ if (ret) {
+ max->irq = 0;
+ pr_err(PR_FMT "unable to allocate IRQ, polling\n");
+ } else {
+ /* Enable RX IRQ only */
+ config |= WC_RXA_IRQ_ENABLE;
+ }
+ }
- /* enable RX IRQ only */
- config |= WC_RXA_IRQ_ENABLE;
- max3110_out(max, config);
-#else
- /* if IRQ is disabled, start a read thread for input data */
- max->read_thread =
- kthread_run(max3110_read_thread, max, "max3110_read");
-#endif
+ if (max->irq == 0) {
+ /* If IRQ is disabled, start a read thread for input data */
+ max->read_thread =
+ kthread_run(max3110_read_thread, max, "max3110_read");
+ if (IS_ERR(max->read_thread)) {
+ ret = PTR_ERR(max->read_thread);
+ max->read_thread = NULL;
+ pr_err(PR_FMT "Can't create read thread!\n");
+ return ret;
+ }
+ }
+
+ ret = max3110_out(max, config);
+ if (ret) {
+ if (max->irq)
+ free_irq(max->irq, max);
+ if (max->read_thread)
+ kthread_stop(max->read_thread);
+ max->read_thread = NULL;
+ return ret;
+ }
max->cur_conf = config;
return 0;
@@ -496,9 +553,8 @@ static void serial_m3110_shutdown(struct uart_port *port)
max->read_thread = NULL;
}
-#ifdef CONFIG_MRST_MAX3110_IRQ
- free_irq(max->irq, max);
-#endif
+ if (max->irq)
+ free_irq(max->irq, max);
/* Disable interrupts from this port */
config = WC_TAG | WC_SW_SHDI;
@@ -516,8 +572,7 @@ static int serial_m3110_request_port(struct uart_port *port)
static void serial_m3110_config_port(struct uart_port *port, int flags)
{
- /* give it fake type */
- port->type = PORT_PXA;
+ port->type = PORT_MAX3100;
}
static int
@@ -552,6 +607,9 @@ serial_m3110_set_termios(struct uart_port *port, struct ktermios *termios,
new_conf |= WC_7BIT_WORD;
break;
default:
+ /* We only support CS7 & CS8 */
+ termios->c_cflag &= ~CSIZE;
+ termios->c_cflag |= CS8;
case CS8:
cval = UART_LCR_WLEN8;
new_conf |= WC_8BIT_WORD;
@@ -560,7 +618,7 @@ serial_m3110_set_termios(struct uart_port *port, struct ktermios *termios,
baud = uart_get_baud_rate(port, termios, old, 0, 230400);
- /* first calc the div for 1.8MHZ clock case */
+ /* First calc the div for 1.8MHZ clock case */
switch (baud) {
case 300:
clk_div = WC_BAUD_DR384;
@@ -596,7 +654,7 @@ serial_m3110_set_termios(struct uart_port *port, struct ktermios *termios,
if (max->clock & MAX3110_HIGH_CLK)
break;
default:
- /* pick the previous baud rate */
+ /* Pick the previous baud rate */
baud = max->baud;
clk_div = max->cur_conf & WC_BAUD_DIV_MASK;
tty_termios_encode_baud_rate(termios, baud, baud);
@@ -604,15 +662,21 @@ serial_m3110_set_termios(struct uart_port *port, struct ktermios *termios,
if (max->clock & MAX3110_HIGH_CLK) {
clk_div += 1;
- /* high clk version max3110 doesn't support B300 */
- if (baud == 300)
+ /* High clk version max3110 doesn't support B300 */
+ if (baud == 300) {
baud = 600;
+ clk_div = WC_BAUD_DR384;
+ }
if (baud == 230400)
clk_div = WC_BAUD_DR1;
tty_termios_encode_baud_rate(termios, baud, baud);
}
new_conf = (new_conf & ~WC_BAUD_DIV_MASK) | clk_div;
+
+ if (unlikely(termios->c_cflag & CMSPAR))
+ termios->c_cflag &= ~CMSPAR;
+
if (termios->c_cflag & CSTOPB)
new_conf |= WC_2_STOPBITS;
else
@@ -632,13 +696,14 @@ serial_m3110_set_termios(struct uart_port *port, struct ktermios *termios,
new_conf |= WC_TAG;
if (new_conf != max->cur_conf) {
- max3110_out(max, new_conf);
- max->cur_conf = new_conf;
- max->baud = baud;
+ if (!max3110_out(max, new_conf)) {
+ max->cur_conf = new_conf;
+ max->baud = baud;
+ }
}
}
-/* don't handle hw handshaking */
+/* Don't handle hw handshaking */
static unsigned int serial_m3110_get_mctrl(struct uart_port *port)
{
return TIOCM_DSR | TIOCM_CAR | TIOCM_DSR;
@@ -672,7 +737,7 @@ struct uart_ops serial_m3110_ops = {
.break_ctl = serial_m3110_break_ctl,
.startup = serial_m3110_startup,
.shutdown = serial_m3110_shutdown,
- .set_termios = serial_m3110_set_termios, /* must have */
+ .set_termios = serial_m3110_set_termios,
.pm = serial_m3110_pm,
.type = serial_m3110_type,
.release_port = serial_m3110_release_port,
@@ -688,52 +753,60 @@ static struct uart_driver serial_m3110_reg = {
.major = TTY_MAJOR,
.minor = 64,
.nr = 1,
- .cons = MRST_CONSOLE,
+ .cons = &serial_m3110_console,
};
+#ifdef CONFIG_PM
static int serial_m3110_suspend(struct spi_device *spi, pm_message_t state)
{
+ struct uart_max3110 *max = spi_get_drvdata(spi);
+
+ disable_irq(max->irq);
+ uart_suspend_port(&serial_m3110_reg, &max->port);
+ max3110_out(max, max->cur_conf | WC_SW_SHDI);
return 0;
}
static int serial_m3110_resume(struct spi_device *spi)
{
+ struct uart_max3110 *max = spi_get_drvdata(spi);
+
+ max3110_out(max, max->cur_conf);
+ uart_resume_port(&serial_m3110_reg, &max->port);
+ enable_irq(max->irq);
return 0;
}
+#else
+#define serial_m3110_suspend NULL
+#define serial_m3110_resume NULL
+#endif
-static struct dw_spi_chip spi0_uart = {
- .poll_mode = 1,
- .enable_dma = 0,
- .type = SPI_FRF_SPI,
-};
-
-static int serial_m3110_probe(struct spi_device *spi)
+static int __devinit serial_m3110_probe(struct spi_device *spi)
{
struct uart_max3110 *max;
- int ret;
- unsigned char *buffer;
+ void *buffer;
u16 res;
+ int ret = 0;
+
max = kzalloc(sizeof(*max), GFP_KERNEL);
if (!max)
return -ENOMEM;
- /* set spi info */
- spi->mode = SPI_MODE_0;
+ /* Set spi info */
spi->bits_per_word = 16;
max->clock = MAX3110_HIGH_CLK;
- spi->controller_data = &spi0_uart;
spi_setup(spi);
- max->port.type = PORT_PXA; /* need apply for a max3110 type */
- max->port.fifosize = 2; /* only have 16b buffer */
+ max->port.type = PORT_MAX3100;
+ max->port.fifosize = 2; /* Only have 16b buffer */
max->port.ops = &serial_m3110_ops;
max->port.line = 0;
max->port.dev = &spi->dev;
max->port.uartclk = 115200;
max->spi = spi;
- max->name = spi->modalias; /* use spi name as the name */
+ strcpy(max->name, spi->modalias);
max->irq = (u16)spi->irq;
mutex_init(&max->thread_mutex);
@@ -755,13 +828,15 @@ static int serial_m3110_probe(struct spi_device *spi)
ret = -ENODEV;
goto err_get_page;
}
- buffer = (unsigned char *)__get_free_page(GFP_KERNEL);
+
+ buffer = (void *)__get_free_page(GFP_KERNEL);
if (!buffer) {
ret = -ENOMEM;
goto err_get_page;
}
- max->con_xmit.buf = (unsigned char *)buffer;
- max->con_xmit.head = max->con_xmit.tail = 0;
+ max->con_xmit.buf = buffer;
+ max->con_xmit.head = 0;
+ max->con_xmit.tail = 0;
max->main_thread = kthread_run(max3110_main_thread,
max, "max3110_main");
@@ -770,8 +845,10 @@ static int serial_m3110_probe(struct spi_device *spi)
goto err_kthread;
}
+ spi_set_drvdata(spi, max);
pmax = max;
- /* give membase a psudo value to pass serial_core's check */
+
+ /* Give membase a psudo value to pass serial_core's check */
max->port.membase = (void *)0xff110000;
uart_add_one_port(&serial_m3110_reg, &max->port);
@@ -780,19 +857,17 @@ static int serial_m3110_probe(struct spi_device *spi)
err_kthread:
free_page((unsigned long)buffer);
err_get_page:
- pmax = NULL;
kfree(max);
return ret;
}
-static int max3110_remove(struct spi_device *dev)
+static int __devexit serial_m3110_remove(struct spi_device *dev)
{
- struct uart_max3110 *max = pmax;
+ struct uart_max3110 *max = spi_get_drvdata(dev);
- if (!pmax)
+ if (!max)
return 0;
- pmax = NULL;
uart_remove_one_port(&serial_m3110_reg, &max->port);
free_page((unsigned long)max->con_xmit.buf);
@@ -811,13 +886,12 @@ static struct spi_driver uart_max3110_driver = {
.owner = THIS_MODULE,
},
.probe = serial_m3110_probe,
- .remove = __devexit_p(max3110_remove),
+ .remove = __devexit_p(serial_m3110_remove),
.suspend = serial_m3110_suspend,
.resume = serial_m3110_resume,
};
-
-int __init serial_m3110_init(void)
+static int __init serial_m3110_init(void)
{
int ret = 0;
@@ -832,7 +906,7 @@ int __init serial_m3110_init(void)
return ret;
}
-void __exit serial_m3110_exit(void)
+static void __exit serial_m3110_exit(void)
{
spi_unregister_driver(&uart_max3110_driver);
uart_unregister_driver(&serial_m3110_reg);
@@ -841,5 +915,5 @@ void __exit serial_m3110_exit(void)
module_init(serial_m3110_init);
module_exit(serial_m3110_exit);
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
MODULE_ALIAS("max3110-uart");
diff --git a/drivers/serial/mrst_max3110.h b/drivers/serial/mrst_max3110.h
index 363478acb2c..d1ef43af397 100644
--- a/drivers/serial/mrst_max3110.h
+++ b/drivers/serial/mrst_max3110.h
@@ -56,4 +56,5 @@
#define WC_BAUD_DR192 (0xE)
#define WC_BAUD_DR384 (0xF)
+#define M3110_RX_FIFO_DEPTH 8
#endif
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index cd8511298bc..c4ea14670d4 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1074,10 +1074,10 @@ uart_wait_modem_status(struct uart_state *state, unsigned long arg)
* NB: both 1->0 and 0->1 transitions are counted except for
* RI where only 0->1 is counted.
*/
-static int uart_get_count(struct uart_state *state,
- struct serial_icounter_struct __user *icnt)
+static int uart_get_icount(struct tty_struct *tty,
+ struct serial_icounter_struct *icount)
{
- struct serial_icounter_struct icount;
+ struct uart_state *state = tty->driver_data;
struct uart_icount cnow;
struct uart_port *uport = state->uart_port;
@@ -1085,19 +1085,19 @@ static int uart_get_count(struct uart_state *state,
memcpy(&cnow, &uport->icount, sizeof(struct uart_icount));
spin_unlock_irq(&uport->lock);
- icount.cts = cnow.cts;
- icount.dsr = cnow.dsr;
- icount.rng = cnow.rng;
- icount.dcd = cnow.dcd;
- icount.rx = cnow.rx;
- icount.tx = cnow.tx;
- icount.frame = cnow.frame;
- icount.overrun = cnow.overrun;
- icount.parity = cnow.parity;
- icount.brk = cnow.brk;
- icount.buf_overrun = cnow.buf_overrun;
+ icount->cts = cnow.cts;
+ icount->dsr = cnow.dsr;
+ icount->rng = cnow.rng;
+ icount->dcd = cnow.dcd;
+ icount->rx = cnow.rx;
+ icount->tx = cnow.tx;
+ icount->frame = cnow.frame;
+ icount->overrun = cnow.overrun;
+ icount->parity = cnow.parity;
+ icount->brk = cnow.brk;
+ icount->buf_overrun = cnow.buf_overrun;
- return copy_to_user(icnt, &icount, sizeof(icount)) ? -EFAULT : 0;
+ return 0;
}
/*
@@ -1150,10 +1150,6 @@ uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd,
case TIOCMIWAIT:
ret = uart_wait_modem_status(state, arg);
break;
-
- case TIOCGICOUNT:
- ret = uart_get_count(state, uarg);
- break;
}
if (ret != -ENOIOCTLCMD)
@@ -2065,7 +2061,19 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
/*
* Re-enable the console device after suspending.
*/
- if (uart_console(uport)) {
+ if (console_suspend_enabled && uart_console(uport)) {
+ /*
+ * First try to use the console cflag setting.
+ */
+ memset(&termios, 0, sizeof(struct ktermios));
+ termios.c_cflag = uport->cons->cflag;
+
+ /*
+ * If that's unset, use the tty termios setting.
+ */
+ if (port->tty && port->tty->termios && termios.c_cflag == 0)
+ termios = *(port->tty->termios);
+
uart_change_pm(state, 0);
uport->ops->set_termios(uport, &termios, NULL);
console_start(uport->cons);
@@ -2283,6 +2291,7 @@ static const struct tty_operations uart_ops = {
#endif
.tiocmget = uart_tiocmget,
.tiocmset = uart_tiocmset,
+ .get_icount = uart_get_icount,
#ifdef CONFIG_CONSOLE_POLL
.poll_init = uart_poll_init,
.poll_get_char = uart_poll_get_char,
diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
index 9b03d7b3e45..c4bf54bb3fc 100644
--- a/drivers/serial/uartlite.c
+++ b/drivers/serial/uartlite.c
@@ -322,6 +322,26 @@ static int ulite_verify_port(struct uart_port *port, struct serial_struct *ser)
return -EINVAL;
}
+#ifdef CONFIG_CONSOLE_POLL
+static int ulite_get_poll_char(struct uart_port *port)
+{
+ if (!(ioread32be(port->membase + ULITE_STATUS)
+ & ULITE_STATUS_RXVALID))
+ return NO_POLL_CHAR;
+
+ return ioread32be(port->membase + ULITE_RX);
+}
+
+static void ulite_put_poll_char(struct uart_port *port, unsigned char ch)
+{
+ while (ioread32be(port->membase + ULITE_STATUS) & ULITE_STATUS_TXFULL)
+ cpu_relax();
+
+ /* write char to device */
+ iowrite32be(ch, port->membase + ULITE_TX);
+}
+#endif
+
static struct uart_ops ulite_ops = {
.tx_empty = ulite_tx_empty,
.set_mctrl = ulite_set_mctrl,
@@ -338,7 +358,11 @@ static struct uart_ops ulite_ops = {
.release_port = ulite_release_port,
.request_port = ulite_request_port,
.config_port = ulite_config_port,
- .verify_port = ulite_verify_port
+ .verify_port = ulite_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_get_char = ulite_get_poll_char,
+ .poll_put_char = ulite_put_poll_char,
+#endif
};
/* ---------------------------------------------------------------------
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 4e41a2a3942..8f1d4fb19d2 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -411,6 +411,26 @@ err_out:
return result;
}
+static int ark3116_get_icount(struct tty_struct *tty,
+ struct serial_icounter_struct *icount)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct ark3116_private *priv = usb_get_serial_port_data(port);
+ struct async_icount cnow = priv->icount;
+ icount->cts = cnow.cts;
+ icount->dsr = cnow.dsr;
+ icount->rng = cnow.rng;
+ icount->dcd = cnow.dcd;
+ icount->rx = cnow.rx;
+ icount->tx = cnow.tx;
+ icount->frame = cnow.frame;
+ icount->overrun = cnow.overrun;
+ icount->parity = cnow.parity;
+ icount->brk = cnow.brk;
+ icount->buf_overrun = cnow.buf_overrun;
+ return 0;
+}
+
static int ark3116_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
@@ -460,25 +480,6 @@ static int ark3116_ioctl(struct tty_struct *tty, struct file *file,
return 0;
}
break;
- case TIOCGICOUNT: {
- struct serial_icounter_struct icount;
- struct async_icount cnow = priv->icount;
- memset(&icount, 0, sizeof(icount));
- icount.cts = cnow.cts;
- icount.dsr = cnow.dsr;
- icount.rng = cnow.rng;
- icount.dcd = cnow.dcd;
- icount.rx = cnow.rx;
- icount.tx = cnow.tx;
- icount.frame = cnow.frame;
- icount.overrun = cnow.overrun;
- icount.parity = cnow.parity;
- icount.brk = cnow.brk;
- icount.buf_overrun = cnow.buf_overrun;
- if (copy_to_user(user_arg, &icount, sizeof(icount)))
- return -EFAULT;
- return 0;
- }
}
return -ENOIOCTLCMD;
@@ -736,6 +737,7 @@ static struct usb_serial_driver ark3116_device = {
.ioctl = ark3116_ioctl,
.tiocmget = ark3116_tiocmget,
.tiocmset = ark3116_tiocmset,
+ .get_icount = ark3116_get_icount,
.open = ark3116_open,
.close = ark3116_close,
.break_ctl = ark3116_break_ctl,
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 97cc87d654c..891c20e3bb3 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -2168,6 +2168,7 @@ static int ftdi_ioctl(struct tty_struct *tty, struct file *file,
* - mask passed in arg for lines of interest
* (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
* Caller should use TIOCGICOUNT to see which one it was.
+ * (except that the driver doesn't support it !)
*
* This code is borrowed from linux/drivers/char/serial.c
*/
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 76e6fb3aab7..a0ab78ada25 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -222,6 +222,8 @@ static void edge_break(struct tty_struct *tty, int break_state);
static int edge_tiocmget(struct tty_struct *tty, struct file *file);
static int edge_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear);
+static int edge_get_icount(struct tty_struct *tty,
+ struct serial_icounter_struct *icount);
static int edge_startup(struct usb_serial *serial);
static void edge_disconnect(struct usb_serial *serial);
static void edge_release(struct usb_serial *serial);
@@ -1624,6 +1626,31 @@ static int edge_tiocmget(struct tty_struct *tty, struct file *file)
return result;
}
+static int edge_get_icount(struct tty_struct *tty,
+ struct serial_icounter_struct *icount)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct edgeport_port *edge_port = usb_get_serial_port_data(port);
+ struct async_icount cnow;
+ cnow = edge_port->icount;
+
+ icount->cts = cnow.cts;
+ icount->dsr = cnow.dsr;
+ icount->rng = cnow.rng;
+ icount->dcd = cnow.dcd;
+ icount->rx = cnow.rx;
+ icount->tx = cnow.tx;
+ icount->frame = cnow.frame;
+ icount->overrun = cnow.overrun;
+ icount->parity = cnow.parity;
+ icount->brk = cnow.brk;
+ icount->buf_overrun = cnow.buf_overrun;
+
+ dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d",
+ __func__, port->number, icount->rx, icount->tx);
+ return 0;
+}
+
static int get_serial_info(struct edgeport_port *edge_port,
struct serial_struct __user *retinfo)
{
@@ -1650,7 +1677,6 @@ static int get_serial_info(struct edgeport_port *edge_port,
}
-
/*****************************************************************************
* SerialIoctl
* this function handles any ioctl calls to the driver
@@ -1663,7 +1689,6 @@ static int edge_ioctl(struct tty_struct *tty, struct file *file,
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
struct async_icount cnow;
struct async_icount cprev;
- struct serial_icounter_struct icount;
dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
@@ -1702,26 +1727,6 @@ static int edge_ioctl(struct tty_struct *tty, struct file *file,
/* NOTREACHED */
break;
- case TIOCGICOUNT:
- cnow = edge_port->icount;
- memset(&icount, 0, sizeof(icount));
- icount.cts = cnow.cts;
- icount.dsr = cnow.dsr;
- icount.rng = cnow.rng;
- icount.dcd = cnow.dcd;
- icount.rx = cnow.rx;
- icount.tx = cnow.tx;
- icount.frame = cnow.frame;
- icount.overrun = cnow.overrun;
- icount.parity = cnow.parity;
- icount.brk = cnow.brk;
- icount.buf_overrun = cnow.buf_overrun;
-
- dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d",
- __func__, port->number, icount.rx, icount.tx);
- if (copy_to_user((void __user *)arg, &icount, sizeof(icount)))
- return -EFAULT;
- return 0;
}
return -ENOIOCTLCMD;
}
diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h
index feb56a4ca79..6ab2a3f97fe 100644
--- a/drivers/usb/serial/io_tables.h
+++ b/drivers/usb/serial/io_tables.h
@@ -123,6 +123,7 @@ static struct usb_serial_driver edgeport_2port_device = {
.set_termios = edge_set_termios,
.tiocmget = edge_tiocmget,
.tiocmset = edge_tiocmset,
+ .get_icount = edge_get_icount,
.write = edge_write,
.write_room = edge_write_room,
.chars_in_buffer = edge_chars_in_buffer,
@@ -152,6 +153,7 @@ static struct usb_serial_driver edgeport_4port_device = {
.set_termios = edge_set_termios,
.tiocmget = edge_tiocmget,
.tiocmset = edge_tiocmset,
+ .get_icount = edge_get_icount,
.write = edge_write,
.write_room = edge_write_room,
.chars_in_buffer = edge_chars_in_buffer,
@@ -181,6 +183,7 @@ static struct usb_serial_driver edgeport_8port_device = {
.set_termios = edge_set_termios,
.tiocmget = edge_tiocmget,
.tiocmset = edge_tiocmset,
+ .get_icount = edge_get_icount,
.write = edge_write,
.write_room = edge_write_room,
.chars_in_buffer = edge_chars_in_buffer,
@@ -209,6 +212,7 @@ static struct usb_serial_driver epic_device = {
.set_termios = edge_set_termios,
.tiocmget = edge_tiocmget,
.tiocmset = edge_tiocmset,
+ .get_icount = edge_get_icount,
.write = edge_write,
.write_room = edge_write_room,
.chars_in_buffer = edge_chars_in_buffer,
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index a7cfc595293..4dad27a0f22 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -2510,6 +2510,27 @@ static int edge_tiocmget(struct tty_struct *tty, struct file *file)
return result;
}
+static int edge_get_icount(struct tty_struct *tty,
+ struct serial_icounter_struct *icount)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct edgeport_port *edge_port = usb_get_serial_port_data(port);
+ struct async_icount *ic = &edge_port->icount;
+
+ icount->cts = ic->cts;
+ icount->dsr = ic->dsr;
+ icount->rng = ic->rng;
+ icount->dcd = ic->dcd;
+ icount->tx = ic->tx;
+ icount->rx = ic->rx;
+ icount->frame = ic->frame;
+ icount->parity = ic->parity;
+ icount->overrun = ic->overrun;
+ icount->brk = ic->brk;
+ icount->buf_overrun = ic->buf_overrun;
+ return 0;
+}
+
static int get_serial_info(struct edgeport_port *edge_port,
struct serial_struct __user *retinfo)
{
@@ -2572,13 +2593,6 @@ static int edge_ioctl(struct tty_struct *tty, struct file *file,
}
/* not reached */
break;
- case TIOCGICOUNT:
- dbg("%s - (%d) TIOCGICOUNT RX=%d, TX=%d", __func__,
- port->number, edge_port->icount.rx, edge_port->icount.tx);
- if (copy_to_user((void __user *)arg, &edge_port->icount,
- sizeof(edge_port->icount)))
- return -EFAULT;
- return 0;
}
return -ENOIOCTLCMD;
}
@@ -2758,6 +2772,7 @@ static struct usb_serial_driver edgeport_1port_device = {
.set_termios = edge_set_termios,
.tiocmget = edge_tiocmget,
.tiocmset = edge_tiocmset,
+ .get_icount = edge_get_icount,
.write = edge_write,
.write_room = edge_write_room,
.chars_in_buffer = edge_chars_in_buffer,
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index aa665817a27..fd0b6414f45 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -1896,10 +1896,37 @@ static int mos7720_tiocmset(struct tty_struct *tty, struct file *file,
return 0;
}
+static int mos7720_get_icount(struct tty_struct *tty,
+ struct serial_icounter_struct *icount)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct moschip_port *mos7720_port;
+ struct async_icount cnow;
+
+ mos7720_port = usb_get_serial_port_data(port);
+ cnow = mos7720_port->icount;
+
+ icount->cts = cnow.cts;
+ icount->dsr = cnow.dsr;
+ icount->rng = cnow.rng;
+ icount->dcd = cnow.dcd;
+ icount->rx = cnow.rx;
+ icount->tx = cnow.tx;
+ icount->frame = cnow.frame;
+ icount->overrun = cnow.overrun;
+ icount->parity = cnow.parity;
+ icount->brk = cnow.brk;
+ icount->buf_overrun = cnow.buf_overrun;
+
+ dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__,
+ port->number, icount->rx, icount->tx);
+ return 0;
+}
+
static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd,
unsigned int __user *value)
{
- unsigned int mcr ;
+ unsigned int mcr;
unsigned int arg;
struct usb_serial_port *port;
@@ -1973,7 +2000,6 @@ static int mos7720_ioctl(struct tty_struct *tty, struct file *file,
struct moschip_port *mos7720_port;
struct async_icount cnow;
struct async_icount cprev;
- struct serial_icounter_struct icount;
mos7720_port = usb_get_serial_port_data(port);
if (mos7720_port == NULL)
@@ -2021,29 +2047,6 @@ static int mos7720_ioctl(struct tty_struct *tty, struct file *file,
}
/* NOTREACHED */
break;
-
- case TIOCGICOUNT:
- cnow = mos7720_port->icount;
-
- memset(&icount, 0, sizeof(struct serial_icounter_struct));
-
- icount.cts = cnow.cts;
- icount.dsr = cnow.dsr;
- icount.rng = cnow.rng;
- icount.dcd = cnow.dcd;
- icount.rx = cnow.rx;
- icount.tx = cnow.tx;
- icount.frame = cnow.frame;
- icount.overrun = cnow.overrun;
- icount.parity = cnow.parity;
- icount.brk = cnow.brk;
- icount.buf_overrun = cnow.buf_overrun;
-
- dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__,
- port->number, icount.rx, icount.tx);
- if (copy_to_user((void __user *)arg, &icount, sizeof(icount)))
- return -EFAULT;
- return 0;
}
return -ENOIOCTLCMD;
@@ -2212,6 +2215,7 @@ static struct usb_serial_driver moschip7720_2port_driver = {
.ioctl = mos7720_ioctl,
.tiocmget = mos7720_tiocmget,
.tiocmset = mos7720_tiocmset,
+ .get_icount = mos7720_get_icount,
.set_termios = mos7720_set_termios,
.write = mos7720_write,
.write_room = mos7720_write_room,
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 1a42bc21379..93dad5853cd 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -2209,6 +2209,34 @@ static int mos7840_get_serial_info(struct moschip_port *mos7840_port,
return 0;
}
+static int mos7840_get_icount(struct tty_struct *tty,
+ struct serial_icounter_struct *icount)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct moschip_port *mos7840_port;
+ struct async_icount cnow;
+
+ mos7840_port = mos7840_get_port_private(port);
+ cnow = mos7840_port->icount;
+
+ smp_rmb();
+ icount->cts = cnow.cts;
+ icount->dsr = cnow.dsr;
+ icount->rng = cnow.rng;
+ icount->dcd = cnow.dcd;
+ icount->rx = cnow.rx;
+ icount->tx = cnow.tx;
+ icount->frame = cnow.frame;
+ icount->overrun = cnow.overrun;
+ icount->parity = cnow.parity;
+ icount->brk = cnow.brk;
+ icount->buf_overrun = cnow.buf_overrun;
+
+ dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__,
+ port->number, icount->rx, icount->tx);
+ return 0;
+}
+
/*****************************************************************************
* SerialIoctl
* this function handles any ioctl calls to the driver
@@ -2223,7 +2251,6 @@ static int mos7840_ioctl(struct tty_struct *tty, struct file *file,
struct async_icount cnow;
struct async_icount cprev;
- struct serial_icounter_struct icount;
if (mos7840_port_paranoia_check(port, __func__)) {
dbg("%s", "Invalid port");
@@ -2282,29 +2309,6 @@ static int mos7840_ioctl(struct tty_struct *tty, struct file *file,
/* NOTREACHED */
break;
- case TIOCGICOUNT:
- cnow = mos7840_port->icount;
- smp_rmb();
-
- memset(&icount, 0, sizeof(struct serial_icounter_struct));
-
- icount.cts = cnow.cts;
- icount.dsr = cnow.dsr;
- icount.rng = cnow.rng;
- icount.dcd = cnow.dcd;
- icount.rx = cnow.rx;
- icount.tx = cnow.tx;
- icount.frame = cnow.frame;
- icount.overrun = cnow.overrun;
- icount.parity = cnow.parity;
- icount.brk = cnow.brk;
- icount.buf_overrun = cnow.buf_overrun;
-
- dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__,
- port->number, icount.rx, icount.tx);
- if (copy_to_user(argp, &icount, sizeof(icount)))
- return -EFAULT;
- return 0;
default:
break;
}
@@ -2674,6 +2678,7 @@ static struct usb_serial_driver moschip7840_4port_device = {
.break_ctl = mos7840_break,
.tiocmget = mos7840_tiocmget,
.tiocmset = mos7840_tiocmset,
+ .get_icount = mos7840_get_icount,
.attach = mos7840_startup,
.disconnect = mos7840_disconnect,
.release = mos7840_release,
diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c
index e986002b384..f5312dd3331 100644
--- a/drivers/usb/serial/ssu100.c
+++ b/drivers/usb/serial/ssu100.c
@@ -416,12 +416,34 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
return 0;
}
+static int ssu100_get_icount(struct tty_struct *tty,
+ struct serial_icounter_struct *icount)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct ssu100_port_private *priv = usb_get_serial_port_data(port);
+ struct async_icount cnow = priv->icount;
+
+ icount->cts = cnow.cts;
+ icount->dsr = cnow.dsr;
+ icount->rng = cnow.rng;
+ icount->dcd = cnow.dcd;
+ icount->rx = cnow.rx;
+ icount->tx = cnow.tx;
+ icount->frame = cnow.frame;
+ icount->overrun = cnow.overrun;
+ icount->parity = cnow.parity;
+ icount->brk = cnow.brk;
+ icount->buf_overrun = cnow.buf_overrun;
+
+ return 0;
+}
+
+
+
static int ssu100_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
struct usb_serial_port *port = tty->driver_data;
- struct ssu100_port_private *priv = usb_get_serial_port_data(port);
- void __user *user_arg = (void __user *)arg;
dbg("%s cmd 0x%04x", __func__, cmd);
@@ -433,27 +455,6 @@ static int ssu100_ioctl(struct tty_struct *tty, struct file *file,
case TIOCMIWAIT:
return wait_modem_info(port, arg);
- case TIOCGICOUNT:
- {
- struct serial_icounter_struct icount;
- struct async_icount cnow = priv->icount;
- memset(&icount, 0, sizeof(icount));
- icount.cts = cnow.cts;
- icount.dsr = cnow.dsr;
- icount.rng = cnow.rng;
- icount.dcd = cnow.dcd;
- icount.rx = cnow.rx;
- icount.tx = cnow.tx;
- icount.frame = cnow.frame;
- icount.overrun = cnow.overrun;
- icount.parity = cnow.parity;
- icount.brk = cnow.brk;
- icount.buf_overrun = cnow.buf_overrun;
- if (copy_to_user(user_arg, &icount, sizeof(icount)))
- return -EFAULT;
- return 0;
- }
-
default:
break;
}
@@ -726,6 +727,7 @@ static struct usb_serial_driver ssu100_device = {
.process_read_urb = ssu100_process_read_urb,
.tiocmget = ssu100_tiocmget,
.tiocmset = ssu100_tiocmset,
+ .get_icount = ssu100_get_icount,
.ioctl = ssu100_ioctl,
.set_termios = ssu100_set_termios,
.disconnect = usb_serial_generic_disconnect,
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 90979a1f531..b2902f307b4 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -108,6 +108,8 @@ static void ti_throttle(struct tty_struct *tty);
static void ti_unthrottle(struct tty_struct *tty);
static int ti_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg);
+static int ti_get_icount(struct tty_struct *tty,
+ struct serial_icounter_struct *icount);
static void ti_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios);
static int ti_tiocmget(struct tty_struct *tty, struct file *file);
@@ -237,6 +239,7 @@ static struct usb_serial_driver ti_1port_device = {
.set_termios = ti_set_termios,
.tiocmget = ti_tiocmget,
.tiocmset = ti_tiocmset,
+ .get_icount = ti_get_icount,
.break_ctl = ti_break,
.read_int_callback = ti_interrupt_callback,
.read_bulk_callback = ti_bulk_in_callback,
@@ -265,6 +268,7 @@ static struct usb_serial_driver ti_2port_device = {
.set_termios = ti_set_termios,
.tiocmget = ti_tiocmget,
.tiocmset = ti_tiocmset,
+ .get_icount = ti_get_icount,
.break_ctl = ti_break,
.read_int_callback = ti_interrupt_callback,
.read_bulk_callback = ti_bulk_in_callback,
@@ -788,6 +792,31 @@ static void ti_unthrottle(struct tty_struct *tty)
}
}
+static int ti_get_icount(struct tty_struct *tty,
+ struct serial_icounter_struct *icount)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct ti_port *tport = usb_get_serial_port_data(port);
+ struct async_icount cnow = tport->tp_icount;
+
+ dbg("%s - (%d) TIOCGICOUNT RX=%d, TX=%d",
+ __func__, port->number,
+ cnow.rx, cnow.tx);
+
+ icount->cts = cnow.cts;
+ icount->dsr = cnow.dsr;
+ icount->rng = cnow.rng;
+ icount->dcd = cnow.dcd;
+ icount->rx = cnow.rx;
+ icount->tx = cnow.tx;
+ icount->frame = cnow.frame;
+ icount->overrun = cnow.overrun;
+ icount->parity = cnow.parity;
+ icount->brk = cnow.brk;
+ icount->buf_overrun = cnow.buf_overrun;
+
+ return 0;
+}
static int ti_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
@@ -830,14 +859,6 @@ static int ti_ioctl(struct tty_struct *tty, struct file *file,
cprev = cnow;
}
break;
- case TIOCGICOUNT:
- dbg("%s - (%d) TIOCGICOUNT RX=%d, TX=%d",
- __func__, port->number,
- tport->tp_icount.rx, tport->tp_icount.tx);
- if (copy_to_user((void __user *)arg, &tport->tp_icount,
- sizeof(tport->tp_icount)))
- return -EFAULT;
- return 0;
}
return -ENOIOCTLCMD;
}
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 7a2177c79bd..e64da74bdcc 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -519,6 +519,18 @@ static int serial_tiocmset(struct tty_struct *tty, struct file *file,
return -EINVAL;
}
+static int serial_get_icount(struct tty_struct *tty,
+ struct serial_icounter_struct *icount)
+{
+ struct usb_serial_port *port = tty->driver_data;
+
+ dbg("%s - port %d", __func__, port->number);
+
+ if (port->serial->type->get_icount)
+ return port->serial->type->get_icount(tty, icount);
+ return -EINVAL;
+}
+
/*
* We would be calling tty_wakeup here, but unfortunately some line
* disciplines have an annoying habit of calling tty->write from
@@ -1195,6 +1207,7 @@ static const struct tty_operations serial_ops = {
.chars_in_buffer = serial_chars_in_buffer,
.tiocmget = serial_tiocmget,
.tiocmset = serial_tiocmset,
+ .get_icount = serial_get_icount,
.cleanup = serial_cleanup,
.install = serial_install,
.proc_fops = &serial_proc_fops,
diff --git a/fs/proc/proc_tty.c b/fs/proc/proc_tty.c
index 83adcc86943..dc44f94022f 100644
--- a/fs/proc/proc_tty.c
+++ b/fs/proc/proc_tty.c
@@ -12,7 +12,10 @@
#include <linux/proc_fs.h>
#include <linux/stat.h>
#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/console.h>
#include <linux/seq_file.h>
+#include <linux/fdtable.h>
#include <linux/bitops.h>
/*
@@ -137,6 +140,160 @@ static const struct file_operations proc_tty_drivers_operations = {
};
/*
+ * The device ID of file descriptor 0 of the current reading
+ * task if a character device...
+ */
+static dev_t current_dev;
+
+/*
+ * This is the handler for /proc/tty/consoles
+ */
+static int show_console_dev(struct seq_file *m, void *v)
+{
+ const struct tty_driver *driver;
+ struct console *con;
+ int index, len;
+ char flags[10];
+ dev_t dev;
+
+ if (v == SEQ_START_TOKEN)
+ return 0;
+ con = (struct console *)v;
+ if (!con)
+ return 0;
+ driver = con->device(con, &index);
+ if (!driver)
+ return 0;
+ dev = MKDEV(driver->major, driver->minor_start) + index;
+
+ index = 0;
+ if (con->flags & CON_ENABLED)
+ flags[index++] = 'E';
+ if (con->flags & CON_CONSDEV)
+ flags[index++] = 'C';
+ if (con->flags & CON_BOOT)
+ flags[index++] = 'B';
+ if (con->flags & CON_PRINTBUFFER)
+ flags[index++] = 'p';
+ if (con->flags & CON_BRL)
+ flags[index++] = 'b';
+ if (con->flags & CON_ANYTIME)
+ flags[index++] = 'a';
+ if (current_dev == dev)
+ flags[index++] = '*';
+ flags[index] = 0;
+
+ seq_printf(m, "%s%d%n", con->name, con->index, &len);
+ len = 21 - len;
+ if (len < 1)
+ len = 1;
+ seq_printf(m, "%*c", len, ' ');
+ seq_printf(m, "%c%c%c (%s)%n", con->read ? 'R' : '-',
+ con->write ? 'W' : '-', con->unblank ? 'U' : '-',
+ flags, &len);
+ len = 13 - len;
+ if (len < 1)
+ len = 1;
+ seq_printf(m, "%*c%4d:%d\n", len, ' ', MAJOR(dev), MINOR(dev));
+
+ return 0;
+}
+
+/* iterator for consoles */
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+ struct console *con;
+ loff_t off = 0;
+
+ if (*pos == 0)
+ return SEQ_START_TOKEN;
+
+ acquire_console_sem();
+ for (con = console_drivers; con; con = con->next) {
+ if (!con->device)
+ continue;
+ if (++off == *pos)
+ break;
+ }
+ release_console_sem();
+
+ return con;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ struct console *con;
+
+ acquire_console_sem();
+ if (v == SEQ_START_TOKEN)
+ con = console_drivers;
+ else
+ con = ((struct console *)v)->next;
+ for (; con; con = con->next) {
+ if (!con->device)
+ continue;
+ ++*pos;
+ break;
+ }
+ release_console_sem();
+
+ return con;
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+static const struct seq_operations tty_consoles_op = {
+ .start = c_start,
+ .next = c_next,
+ .stop = c_stop,
+ .show = show_console_dev
+};
+
+/*
+ * Used for open /proc/tty/consoles. Before this detect
+ * the device ID of file descriptor 0 of the current
+ * reading task if a character device...
+ */
+static int tty_consoles_open(struct inode *inode, struct file *file)
+{
+ struct files_struct *curfiles;
+
+ current_dev = 0;
+ curfiles = get_files_struct(current);
+ if (curfiles) {
+ const struct file *curfp;
+ spin_lock(&curfiles->file_lock);
+ curfp = fcheck_files(curfiles, 0);
+ if (curfp && curfp->private_data) {
+ const struct inode *inode;
+ dget(curfp->f_dentry);
+ inode = curfp->f_dentry->d_inode;
+ if (S_ISCHR(inode->i_mode)) {
+ struct tty_struct *tty;
+ tty = (struct tty_struct *)curfp->private_data;
+ if (tty && tty->magic == TTY_MAGIC) {
+ tty = tty_pair_get_tty(tty);
+ current_dev = tty_devnum(tty);
+ }
+ }
+ dput(curfp->f_dentry);
+ }
+ spin_unlock(&curfiles->file_lock);
+ put_files_struct(curfiles);
+ }
+ return seq_open(file, &tty_consoles_op);
+}
+
+static const struct file_operations proc_tty_consoles_operations = {
+ .open = tty_consoles_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
+
+/*
* This function is called by tty_register_driver() to handle
* registering the driver's /proc handler into /proc/tty/driver/<foo>
*/
@@ -186,4 +343,5 @@ void __init proc_tty_init(void)
proc_tty_driver = proc_mkdir_mode("tty/driver", S_IRUSR|S_IXUSR, NULL);
proc_create("tty/ldiscs", 0, NULL, &tty_ldiscs_proc_fops);
proc_create("tty/drivers", 0, NULL, &proc_tty_drivers_operations);
+ proc_create("tty/consoles", 0, NULL, &proc_tty_consoles_operations);
}
diff --git a/include/asm-generic/ioctls.h b/include/asm-generic/ioctls.h
index 8554cb6a81b..a3216655d65 100644
--- a/include/asm-generic/ioctls.h
+++ b/include/asm-generic/ioctls.h
@@ -62,7 +62,9 @@
#define TCSETSW2 _IOW('T', 0x2C, struct termios2)
#define TCSETSF2 _IOW('T', 0x2D, struct termios2)
#define TIOCGRS485 0x542E
+#ifndef TIOCSRS485
#define TIOCSRS485 0x542F
+#endif
#define TIOCGPTN _IOR('T', 0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */
#define TCGETX 0x5432 /* SYS5 TCGETX compatibility */
diff --git a/include/linux/altera_uart.h b/include/linux/altera_uart.h
index 8d441064a30..a10a9079197 100644
--- a/include/linux/altera_uart.h
+++ b/include/linux/altera_uart.h
@@ -5,10 +5,15 @@
#ifndef __ALTUART_H
#define __ALTUART_H
+#include <linux/init.h>
+
struct altera_uart_platform_uart {
unsigned long mapbase; /* Physical address base */
unsigned int irq; /* Interrupt vector */
unsigned int uartclk; /* UART clock rate */
+ unsigned int bus_shift; /* Bus shift (address stride) */
};
+int __init early_altera_uart_setup(struct altera_uart_platform_uart *platp);
+
#endif /* __ALTUART_H */
diff --git a/include/linux/selection.h b/include/linux/selection.h
index 8cdaa1151d2..85193aa8c1e 100644
--- a/include/linux/selection.h
+++ b/include/linux/selection.h
@@ -39,5 +39,6 @@ extern void putconsxy(struct vc_data *vc, unsigned char *p);
extern u16 vcs_scr_readw(struct vc_data *vc, const u16 *org);
extern void vcs_scr_writew(struct vc_data *vc, u16 val, u16 *org);
+extern void vcs_scr_updated(struct vc_data *vc);
#endif
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index 7638deaaba6..97f5b45bbc0 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -35,6 +35,8 @@ struct plat_serial8250_port {
void (*set_termios)(struct uart_port *,
struct ktermios *new,
struct ktermios *old);
+ void (*pm)(struct uart_port *, unsigned int state,
+ unsigned old);
};
/*
@@ -76,5 +78,11 @@ extern int serial8250_find_port_for_earlycon(void);
extern int setup_early_serial8250_console(char *cmdline);
extern void serial8250_do_set_termios(struct uart_port *port,
struct ktermios *termios, struct ktermios *old);
+extern void serial8250_do_pm(struct uart_port *port, unsigned int state,
+ unsigned int oldstate);
+
+extern void serial8250_set_isa_configurator(void (*v)
+ (int port, struct uart_port *up,
+ unsigned short *capabilities));
#endif
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 563e2340091..99e5994e6f8 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -289,6 +289,8 @@ struct uart_port {
void (*set_termios)(struct uart_port *,
struct ktermios *new,
struct ktermios *old);
+ void (*pm)(struct uart_port *, unsigned int state,
+ unsigned int old);
unsigned int irq; /* irq number */
unsigned long irqflags; /* irq flags */
unsigned int uartclk; /* base uart clock */
@@ -411,6 +413,14 @@ unsigned int uart_get_baud_rate(struct uart_port *port, struct ktermios *termios
unsigned int max);
unsigned int uart_get_divisor(struct uart_port *port, unsigned int baud);
+/* Base timer interval for polling */
+static inline int uart_poll_timeout(struct uart_port *port)
+{
+ int timeout = port->timeout;
+
+ return timeout > 6 ? (timeout / 2 - 2) : 1;
+}
+
/*
* Console helpers.
*/
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 67d64e6efe7..86be0cdeb11 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -256,6 +256,7 @@ struct tty_operations;
struct tty_struct {
int magic;
struct kref kref;
+ struct device *dev;
struct tty_driver *driver;
const struct tty_operations *ops;
int index;
@@ -465,7 +466,7 @@ extern void proc_clear_tty(struct task_struct *p);
extern struct tty_struct *get_current_tty(void);
extern void tty_default_fops(struct file_operations *fops);
extern struct tty_struct *alloc_tty_struct(void);
-extern void tty_add_file(struct tty_struct *tty, struct file *file);
+extern int tty_add_file(struct tty_struct *tty, struct file *file);
extern void free_tty_struct(struct tty_struct *tty);
extern void initialize_tty_struct(struct tty_struct *tty,
struct tty_driver *driver, int idx);
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index b0867798252..db2d227694d 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -224,6 +224,12 @@
* unless the tty also has a valid tty->termiox pointer.
*
* Optional: Called under the termios lock
+ *
+ * int (*get_icount)(struct tty_struct *tty, struct serial_icounter *icount);
+ *
+ * Called when the device receives a TIOCGICOUNT ioctl. Passed a kernel
+ * structure to complete. This method is optional and will only be called
+ * if provided (otherwise EINVAL will be returned).
*/
#include <linux/fs.h>
@@ -232,6 +238,7 @@
struct tty_struct;
struct tty_driver;
+struct serial_icounter_struct;
struct tty_operations {
struct tty_struct * (*lookup)(struct tty_driver *driver,
@@ -268,6 +275,8 @@ struct tty_operations {
unsigned int set, unsigned int clear);
int (*resize)(struct tty_struct *tty, struct winsize *ws);
int (*set_termiox)(struct tty_struct *tty, struct termiox *tnew);
+ int (*get_icount)(struct tty_struct *tty,
+ struct serial_icounter_struct *icount);
#ifdef CONFIG_CONSOLE_POLL
int (*poll_init)(struct tty_driver *driver, int line, char *options);
int (*poll_get_char)(struct tty_driver *driver, int line);
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 55675b1efb2..16d682f4f7c 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -271,6 +271,8 @@ struct usb_serial_driver {
int (*tiocmget)(struct tty_struct *tty, struct file *file);
int (*tiocmset)(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear);
+ int (*get_icount)(struct tty_struct *tty,
+ struct serial_icounter_struct *icount);
/* Called by the tty layer for port level work. There may or may not
be an attached tty at this point */
void (*dtr_rts)(struct usb_serial_port *port, int on);
diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c
index befc3a52aa0..84c2a4d013c 100644
--- a/net/bluetooth/rfcomm/tty.c
+++ b/net/bluetooth/rfcomm/tty.c
@@ -844,10 +844,6 @@ static int rfcomm_tty_ioctl(struct tty_struct *tty, struct file *filp, unsigned
BT_DBG("TIOCMIWAIT");
break;
- case TIOCGICOUNT:
- BT_DBG("TIOCGICOUNT");
- break;
-
case TIOCGSERIAL:
BT_ERR("TIOCGSERIAL is not supported");
return -ENOIOCTLCMD;