diff options
Diffstat (limited to 'arch/arm/mach-mx5/board-mx51_babbage.c')
| -rw-r--r-- | arch/arm/mach-mx5/board-mx51_babbage.c | 43 |
1 files changed, 42 insertions, 1 deletions
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index 6e384d92e62..10d2f6bde17 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -17,6 +17,7 @@ #include <linux/delay.h> #include <linux/io.h> #include <linux/fsl_devices.h> +#include <linux/fec.h> #include <mach/common.h> #include <mach/hardware.h> @@ -35,7 +36,8 @@ #define BABBAGE_USB_HUB_RESET (0*32 + 7) /* GPIO_1_7 */ #define BABBAGE_USBH1_STP (0*32 + 27) /* GPIO_1_27 */ -#define BABBAGE_PHY_RESET (1*32 +5) /* GPIO_2_5 */ +#define BABBAGE_PHY_RESET (1*32 + 5) /* GPIO_2_5 */ +#define BABBAGE_FEC_PHY_RESET (1*32 + 14) /* GPIO_2_14 */ /* USB_CTRL_1 */ #define MX51_USB_CTRL_1_OFFSET 0x10 @@ -93,6 +95,28 @@ static struct pad_desc mx51babbage_pads[] = { /* USB HUB reset line*/ MX51_PAD_GPIO_1_7__GPIO_1_7, + + /* FEC */ + MX51_PAD_EIM_EB2__FEC_MDIO, + MX51_PAD_EIM_EB3__FEC_RDAT1, + MX51_PAD_EIM_CS2__FEC_RDAT2, + MX51_PAD_EIM_CS3__FEC_RDAT3, + MX51_PAD_EIM_CS4__FEC_RX_ER, + MX51_PAD_EIM_CS5__FEC_CRS, + MX51_PAD_NANDF_RB2__FEC_COL, + MX51_PAD_NANDF_RB3__FEC_RXCLK, + MX51_PAD_NANDF_RB6__FEC_RDAT0, + MX51_PAD_NANDF_RB7__FEC_TDAT0, + MX51_PAD_NANDF_CS2__FEC_TX_ER, + MX51_PAD_NANDF_CS3__FEC_MDC, + MX51_PAD_NANDF_CS4__FEC_TDAT1, + MX51_PAD_NANDF_CS5__FEC_TDAT2, + MX51_PAD_NANDF_CS6__FEC_TDAT3, + MX51_PAD_NANDF_CS7__FEC_TX_EN, + MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK, + + /* FEC PHY reset line */ + MX51_PAD_EIM_A20__GPIO_2_14, }; /* Serial ports */ @@ -171,6 +195,22 @@ static inline void babbage_usbhub_reset(void) gpio_set_value(BABBAGE_USB_HUB_RESET, 1); } +static inline void babbage_fec_reset(void) +{ + int ret; + + /* reset FEC PHY */ + ret = gpio_request(BABBAGE_FEC_PHY_RESET, "fec-phy-reset"); + if (ret) { + printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret); + return; + } + gpio_direction_output(BABBAGE_FEC_PHY_RESET, 0); + gpio_set_value(BABBAGE_FEC_PHY_RESET, 0); + msleep(1); + gpio_set_value(BABBAGE_FEC_PHY_RESET, 1); +} + /* This function is board specific as the bit mask for the plldiv will also be different for other Freescale SoCs, thus a common bitmask is not possible and cannot get place in /plat-mxc/ehci.c.*/ @@ -250,6 +290,7 @@ static void __init mxc_board_init(void) mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads, ARRAY_SIZE(mx51babbage_pads)); mxc_init_imx_uart(); + babbage_fec_reset(); platform_add_devices(devices, ARRAY_SIZE(devices)); mxc_register_device(&mxc_i2c_device0, &babbage_i2c_data); |