1 files changed, 211 insertions, 82 deletions

diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 999b91e023b..a6d0b34b799 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -2,7 +2,7 @@
  *  linux/arch/arm/mach-omap2/clock.c
  *
  *  Copyright (C) 2005-2008 Texas Instruments, Inc.
- *  Copyright (C) 2004-2008 Nokia Corporation
+ *  Copyright (C) 2004-2010 Nokia Corporation
  *
  *  Contacts:
  *  Richard Woodruff <r-woodruff2@ti.com>
@@ -14,11 +14,10 @@
  */
 #undef DEBUG
 
-#include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/device.h>
 #include <linux/list.h>
 #include <linux/errno.h>
+#include <linux/err.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/io.h>
@@ -38,9 +37,9 @@
 
 u8 cpu_mask;
 
-/*-------------------------------------------------------------------------
- * OMAP2/3/4 specific clock functions
- *-------------------------------------------------------------------------*/
+/*
+ * OMAP2+ specific clock functions
+ */
 
 /* Private functions */
 
@@ -57,7 +56,7 @@ u8 cpu_mask;
 static void _omap2_module_wait_ready(struct clk *clk)
 {
 	void __iomem *companion_reg, *idlest_reg;
-	u8 other_bit, idlest_bit;
+	u8 other_bit, idlest_bit, idlest_val;
 
 	/* Not all modules have multiple clocks that their IDLEST depends on */
 	if (clk->ops->find_companion) {
@@ -66,50 +65,15 @@ static void _omap2_module_wait_ready(struct clk *clk)
 			return;
 	}
 
-	clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit);
+	clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit, &idlest_val);
 
-	omap2_cm_wait_idlest(idlest_reg, (1 << idlest_bit), clk->name);
-}
-
-/* Enables clock without considering parent dependencies or use count
- * REVISIT: Maybe change this to use clk->enable like on omap1?
- */
-static int _omap2_clk_enable(struct clk *clk)
-{
-	return clk->ops->enable(clk);
-}
-
-/* Disables clock without considering parent dependencies or use count */
-static void _omap2_clk_disable(struct clk *clk)
-{
-	clk->ops->disable(clk);
+	omap2_cm_wait_idlest(idlest_reg, (1 << idlest_bit), idlest_val,
+			     clk->name);
 }
 
 /* Public functions */
 
 /**
- * omap2xxx_clk_commit - commit clock parent/rate changes in hardware
- * @clk: struct clk *
- *
- * If @clk has the DELAYED_APP flag set, meaning that parent/rate changes
- * don't take effect until the VALID_CONFIG bit is written, write the
- * VALID_CONFIG bit and wait for the write to complete.  No return value.
- */
-void omap2xxx_clk_commit(struct clk *clk)
-{
-	if (!cpu_is_omap24xx())
-		return;
-
-	if (!(clk->flags & DELAYED_APP))
-		return;
-
-	prm_write_mod_reg(OMAP24XX_VALID_CONFIG, OMAP24XX_GR_MOD,
-		OMAP2_PRCM_CLKCFG_CTRL_OFFSET);
-	/* OCP barrier */
-	prm_read_mod_reg(OMAP24XX_GR_MOD, OMAP2_PRCM_CLKCFG_CTRL_OFFSET);
-}
-
-/**
  * omap2_init_clk_clkdm - look up a clockdomain name, store pointer in clk
  * @clk: OMAP clock struct ptr to use
  *
@@ -175,7 +139,8 @@ void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg,
  * omap2_clk_dflt_find_idlest - find CM_IDLEST reg va, bit shift for @clk
  * @clk: struct clk * to find IDLEST info for
  * @idlest_reg: void __iomem ** to return the CM_IDLEST va in
- * @idlest_bit: u8 ** to return the CM_IDLEST bit shift in
+ * @idlest_bit: u8 * to return the CM_IDLEST bit shift in
+ * @idlest_val: u8 * to return the idle status indicator
  *
  * Return the CM_IDLEST register address and bit shift corresponding
  * to the module that "owns" this clock.  This default code assumes
@@ -185,13 +150,26 @@ void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg,
  * CM_IDLEST2).  This is not true for all modules.  No return value.
  */
 void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg,
-				u8 *idlest_bit)
+				u8 *idlest_bit, u8 *idlest_val)
 {
 	u32 r;
 
 	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
 	*idlest_reg = (__force void __iomem *)r;
 	*idlest_bit = clk->enable_bit;
+
+	/*
+	 * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
+	 * 34xx reverses this, just to keep us on our toes
+	 * AM35xx uses both, depending on the module.
+	 */
+	if (cpu_is_omap24xx())
+		*idlest_val = OMAP24XX_CM_IDLEST_VAL;
+	else if (cpu_is_omap34xx())
+		*idlest_val = OMAP34XX_CM_IDLEST_VAL;
+	else
+		BUG();
+
 }
 
 int omap2_dflt_clk_enable(struct clk *clk)
@@ -253,46 +231,106 @@ const struct clkops clkops_omap2_dflt = {
 	.disable	= omap2_dflt_clk_disable,
 };
 
+/**
+ * omap2_clk_disable - disable a clock, if the system is not using it
+ * @clk: struct clk * to disable
+ *
+ * Decrements the usecount on struct clk @clk.  If there are no users
+ * left, call the clkops-specific clock disable function to disable it
+ * in hardware.  If the clock is part of a clockdomain (which they all
+ * should be), request that the clockdomain be disabled.  (It too has
+ * a usecount, and so will not be disabled in the hardware until it no
+ * longer has any users.)  If the clock has a parent clock (most of
+ * them do), then call ourselves, recursing on the parent clock.  This
+ * can cause an entire branch of the clock tree to be powered off by
+ * simply disabling one clock.  Intended to be called with the clockfw_lock
+ * spinlock held.  No return value.
+ */
 void omap2_clk_disable(struct clk *clk)
 {
-	if (clk->usecount > 0 && !(--clk->usecount)) {
-		_omap2_clk_disable(clk);
-		if (clk->parent)
-			omap2_clk_disable(clk->parent);
-		if (clk->clkdm)
-			omap2_clkdm_clk_disable(clk->clkdm, clk);
-
+	if (clk->usecount == 0) {
+		WARN(1, "clock: %s: omap2_clk_disable() called, but usecount "
+		     "already 0?", clk->name);
+		return;
 	}
+
+	pr_debug("clock: %s: decrementing usecount\n", clk->name);
+
+	clk->usecount--;
+
+	if (clk->usecount > 0)
+		return;
+
+	pr_debug("clock: %s: disabling in hardware\n", clk->name);
+
+	clk->ops->disable(clk);
+
+	if (clk->clkdm)
+		omap2_clkdm_clk_disable(clk->clkdm, clk);
+
+	if (clk->parent)
+		omap2_clk_disable(clk->parent);
 }
 
+/**
+ * omap2_clk_enable - request that the system enable a clock
+ * @clk: struct clk * to enable
+ *
+ * Increments the usecount on struct clk @clk.  If there were no users
+ * previously, then recurse up the clock tree, enabling all of the
+ * clock's parents and all of the parent clockdomains, and finally,
+ * enabling @clk's clockdomain, and @clk itself.  Intended to be
+ * called with the clockfw_lock spinlock held.  Returns 0 upon success
+ * or a negative error code upon failure.
+ */
 int omap2_clk_enable(struct clk *clk)
 {
-	int ret = 0;
+	int ret;
 
-	if (clk->usecount++ == 0) {
-		if (clk->clkdm)
-			omap2_clkdm_clk_enable(clk->clkdm, clk);
+	pr_debug("clock: %s: incrementing usecount\n", clk->name);
 
-		if (clk->parent) {
-			ret = omap2_clk_enable(clk->parent);
-			if (ret)
-				goto err;
-		}
+	clk->usecount++;
 
-		ret = _omap2_clk_enable(clk);
+	if (clk->usecount > 1)
+		return 0;
+
+	pr_debug("clock: %s: enabling in hardware\n", clk->name);
+
+	if (clk->parent) {
+		ret = omap2_clk_enable(clk->parent);
 		if (ret) {
-			if (clk->parent)
-				omap2_clk_disable(clk->parent);
+			WARN(1, "clock: %s: could not enable parent %s: %d\n",
+			     clk->name, clk->parent->name, ret);
+			goto oce_err1;
+		}
+	}
 
-			goto err;
+	if (clk->clkdm) {
+		ret = omap2_clkdm_clk_enable(clk->clkdm, clk);
+		if (ret) {
+			WARN(1, "clock: %s: could not enable clockdomain %s: "
+			     "%d\n", clk->name, clk->clkdm->name, ret);
+			goto oce_err2;
 		}
 	}
-	return ret;
 
-err:
+	ret = clk->ops->enable(clk);
+	if (ret) {
+		WARN(1, "clock: %s: could not enable: %d\n", clk->name, ret);
+		goto oce_err3;
+	}
+
+	return 0;
+
+oce_err3:
 	if (clk->clkdm)
 		omap2_clkdm_clk_disable(clk->clkdm, clk);
+oce_err2:
+	if (clk->parent)
+		omap2_clk_disable(clk->parent);
+oce_err1:
 	clk->usecount--;
+
 	return ret;
 }
 
@@ -303,11 +341,6 @@ int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
 
 	pr_debug("clock: set_rate for clock %s to rate %ld\n", clk->name, rate);
 
-	/* CONFIG_PARTICIPANT clocks are changed only in sets via the
-	   rate table mechanism, driven by mpu_speed  */
-	if (clk->flags & CONFIG_PARTICIPANT)
-		return -EINVAL;
-
 	/* dpll_ck, core_ck, virt_prcm_set; plus all clksel clocks */
 	if (clk->set_rate)
 		ret = clk->set_rate(clk, rate);
@@ -317,18 +350,30 @@ int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
 
 int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
 {
-	if (clk->flags & CONFIG_PARTICIPANT)
-		return -EINVAL;
-
 	if (!clk->clksel)
 		return -EINVAL;
 
+	if (clk->parent == new_parent)
+		return 0;
+
 	return omap2_clksel_set_parent(clk, new_parent);
 }
 
-/*-------------------------------------------------------------------------
- * Omap2 clock reset and init functions
- *-------------------------------------------------------------------------*/
+/* OMAP3/4 non-CORE DPLL clkops */
+
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
+
+const struct clkops clkops_omap3_noncore_dpll_ops = {
+	.enable		= omap3_noncore_dpll_enable,
+	.disable	= omap3_noncore_dpll_disable,
+};
+
+#endif
+
+
+/*
+ * OMAP2+ clock reset and init functions
+ */
 
 #ifdef CONFIG_OMAP_RESET_CLOCKS
 void omap2_clk_disable_unused(struct clk *clk)
@@ -345,13 +390,97 @@ void omap2_clk_disable_unused(struct clk *clk)
 	if (cpu_is_omap34xx()) {
 		omap2_clk_enable(clk);
 		omap2_clk_disable(clk);
-	} else
-		_omap2_clk_disable(clk);
+	} else {
+		clk->ops->disable(clk);
+	}
 	if (clk->clkdm != NULL)
 		pwrdm_clkdm_state_switch(clk->clkdm);
 }
 #endif
 
+/**
+ * omap2_clk_switch_mpurate_at_boot - switch ARM MPU rate by boot-time argument
+ * @mpurate_ck_name: clk name of the clock to change rate
+ *
+ * Change the ARM MPU clock rate to the rate specified on the command
+ * line, if one was specified.  @mpurate_ck_name should be
+ * "virt_prcm_set" on OMAP2xxx and "dpll1_ck" on OMAP34xx/OMAP36xx.
+ * XXX Does not handle voltage scaling - on OMAP2xxx this is currently
+ * handled by the virt_prcm_set clock, but this should be handled by
+ * the OPP layer.  XXX This is intended to be handled by the OPP layer
+ * code in the near future and should be removed from the clock code.
+ * Returns -EINVAL if 'mpurate' is zero or if clk_set_rate() rejects
+ * the rate, -ENOENT if the struct clk referred to by @mpurate_ck_name
+ * cannot be found, or 0 upon success.
+ */
+int __init omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name)
+{
+	struct clk *mpurate_ck;
+	int r;
+
+	if (!mpurate)
+		return -EINVAL;
+
+	mpurate_ck = clk_get(NULL, mpurate_ck_name);
+	if (WARN(IS_ERR(mpurate_ck), "Failed to get %s.\n", mpurate_ck_name))
+		return -ENOENT;
+
+	r = clk_set_rate(mpurate_ck, mpurate);
+	if (IS_ERR_VALUE(r)) {
+		WARN(1, "clock: %s: unable to set MPU rate to %d: %d\n",
+		     mpurate_ck->name, mpurate, r);
+		return -EINVAL;
+	}
+
+	calibrate_delay();
+	recalculate_root_clocks();
+
+	clk_put(mpurate_ck);
+
+	return 0;
+}
+
+/**
+ * omap2_clk_print_new_rates - print summary of current clock tree rates
+ * @hfclkin_ck_name: clk name for the off-chip HF oscillator
+ * @core_ck_name: clk name for the on-chip CORE_CLK
+ * @mpu_ck_name: clk name for the ARM MPU clock
+ *
+ * Prints a short message to the console with the HFCLKIN oscillator
+ * rate, the rate of the CORE clock, and the rate of the ARM MPU clock.
+ * Called by the boot-time MPU rate switching code.   XXX This is intended
+ * to be handled by the OPP layer code in the near future and should be
+ * removed from the clock code.  No return value.
+ */
+void __init omap2_clk_print_new_rates(const char *hfclkin_ck_name,
+				      const char *core_ck_name,
+				      const char *mpu_ck_name)
+{
+	struct clk *hfclkin_ck, *core_ck, *mpu_ck;
+	unsigned long hfclkin_rate;
+
+	mpu_ck = clk_get(NULL, mpu_ck_name);
+	if (WARN(IS_ERR(mpu_ck), "clock: failed to get %s.\n", mpu_ck_name))
+		return;
+
+	core_ck = clk_get(NULL, core_ck_name);
+	if (WARN(IS_ERR(core_ck), "clock: failed to get %s.\n", core_ck_name))
+		return;
+
+	hfclkin_ck = clk_get(NULL, hfclkin_ck_name);
+	if (WARN(IS_ERR(hfclkin_ck), "Failed to get %s.\n", hfclkin_ck_name))
+		return;
+
+	hfclkin_rate = clk_get_rate(hfclkin_ck);
+
+	pr_info("Switched to new clocking rate (Crystal/Core/MPU): "
+		"%ld.%01ld/%ld/%ld MHz\n",
+		(hfclkin_rate / 1000000),
+		((hfclkin_rate / 100000) % 10),
+		(clk_get_rate(core_ck) / 1000000),
+		(clk_get_rate(mpu_ck) / 1000000));
+}
+
 /* Common data */
 
 struct clk_functions omap2_clk_functions = {