diff options
Diffstat (limited to 'arch/m68k/platform')
| -rw-r--r-- | arch/m68k/platform/5206/config.c | 6 | ||||
| -rw-r--r-- | arch/m68k/platform/5206e/Makefile | 18 | ||||
| -rw-r--r-- | arch/m68k/platform/5206e/config.c | 127 | ||||
| -rw-r--r-- | arch/m68k/platform/5206e/gpio.c | 49 | ||||
| -rw-r--r-- | arch/m68k/platform/5272/intc.c | 2 | ||||
| -rw-r--r-- | arch/m68k/platform/68328/entry.S | 15 | ||||
| -rw-r--r-- | arch/m68k/platform/68328/ints.c | 10 | ||||
| -rw-r--r-- | arch/m68k/platform/68360/entry.S | 15 | ||||
| -rw-r--r-- | arch/m68k/platform/68360/ints.c | 11 | ||||
| -rw-r--r-- | arch/m68k/platform/coldfire/entry.S | 24 | ||||
| -rw-r--r-- | arch/m68k/platform/coldfire/intc-2.c | 2 | ||||
| -rw-r--r-- | arch/m68k/platform/coldfire/intc-simr.c | 2 | ||||
| -rw-r--r-- | arch/m68k/platform/coldfire/intc.c | 1 | ||||
| -rw-r--r-- | arch/m68k/platform/coldfire/vectors.c | 10 |
14 files changed, 46 insertions, 246 deletions
diff --git a/arch/m68k/platform/5206/config.c b/arch/m68k/platform/5206/config.c index 9c335465e66..6fa3f800277 100644 --- a/arch/m68k/platform/5206/config.c +++ b/arch/m68k/platform/5206/config.c @@ -98,6 +98,12 @@ void m5206_cpu_reset(void) void __init config_BSP(char *commandp, int size) { +#if defined(CONFIG_NETtel) + /* Copy command line from FLASH to local buffer... */ + memcpy(commandp, (char *) 0xf0004000, size); + commandp[size-1] = 0; +#endif /* CONFIG_NETtel */ + mach_reset = m5206_cpu_reset; m5206_timers_init(); m5206_uarts_init(); diff --git a/arch/m68k/platform/5206e/Makefile b/arch/m68k/platform/5206e/Makefile deleted file mode 100644 index b5db05625cf..00000000000 --- a/arch/m68k/platform/5206e/Makefile +++ /dev/null @@ -1,18 +0,0 @@ -# -# Makefile for the m68knommu linux kernel. -# - -# -# If you want to play with the HW breakpoints then you will -# need to add define this, which will give you a stack backtrace -# on the console port whenever a DBG interrupt occurs. You have to -# set up you HW breakpoints to trigger a DBG interrupt: -# -# ccflags-y := -DTRAP_DBG_INTERRUPT -# asflags-y := -DTRAP_DBG_INTERRUPT -# - -asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1 - -obj-y := config.o gpio.o - diff --git a/arch/m68k/platform/5206e/config.c b/arch/m68k/platform/5206e/config.c deleted file mode 100644 index 942397984c6..00000000000 --- a/arch/m68k/platform/5206e/config.c +++ /dev/null @@ -1,127 +0,0 @@ -/***************************************************************************/ - -/* - * linux/arch/m68knommu/platform/5206e/config.c - * - * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com) - */ - -/***************************************************************************/ - -#include <linux/kernel.h> -#include <linux/param.h> -#include <linux/init.h> -#include <linux/io.h> -#include <asm/machdep.h> -#include <asm/coldfire.h> -#include <asm/mcfsim.h> -#include <asm/mcfuart.h> -#include <asm/mcfdma.h> - -/***************************************************************************/ - -static struct mcf_platform_uart m5206e_uart_platform[] = { - { - .mapbase = MCF_MBAR + MCFUART_BASE1, - .irq = 73, - }, - { - .mapbase = MCF_MBAR + MCFUART_BASE2, - .irq = 74, - }, - { }, -}; - -static struct platform_device m5206e_uart = { - .name = "mcfuart", - .id = 0, - .dev.platform_data = m5206e_uart_platform, -}; - -static struct platform_device *m5206e_devices[] __initdata = { - &m5206e_uart, -}; - -/***************************************************************************/ - -static void __init m5206e_uart_init_line(int line, int irq) -{ - if (line == 0) { - writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR); - writeb(irq, MCFUART_BASE1 + MCFUART_UIVR); - mcf_mapirq2imr(irq, MCFINTC_UART0); - } else if (line == 1) { - writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR); - writeb(irq, MCFUART_BASE2 + MCFUART_UIVR); - mcf_mapirq2imr(irq, MCFINTC_UART1); - } -} - -static void __init m5206e_uarts_init(void) -{ - const int nrlines = ARRAY_SIZE(m5206e_uart_platform); - int line; - - for (line = 0; (line < nrlines); line++) - m5206e_uart_init_line(line, m5206e_uart_platform[line].irq); -} - -/***************************************************************************/ - -static void __init m5206e_timers_init(void) -{ - /* Timer1 is always used as system timer */ - writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3, - MCF_MBAR + MCFSIM_TIMER1ICR); - mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1); - -#ifdef CONFIG_HIGHPROFILE - /* Timer2 is to be used as a high speed profile timer */ - writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3, - MCF_MBAR + MCFSIM_TIMER2ICR); - mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2); -#endif -} - -/***************************************************************************/ - -void m5206e_cpu_reset(void) -{ - local_irq_disable(); - /* Set watchdog to soft reset, and enabled */ - __raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR); - for (;;) - /* wait for watchdog to timeout */; -} - -/***************************************************************************/ - -void __init config_BSP(char *commandp, int size) -{ -#if defined(CONFIG_NETtel) - /* Copy command line from FLASH to local buffer... */ - memcpy(commandp, (char *) 0xf0004000, size); - commandp[size-1] = 0; -#endif /* CONFIG_NETtel */ - - mach_reset = m5206e_cpu_reset; - m5206e_timers_init(); - m5206e_uarts_init(); - - /* Only support the external interrupts on their primary level */ - mcf_mapirq2imr(25, MCFINTC_EINT1); - mcf_mapirq2imr(28, MCFINTC_EINT4); - mcf_mapirq2imr(31, MCFINTC_EINT7); -} - -/***************************************************************************/ - -static int __init init_BSP(void) -{ - platform_add_devices(m5206e_devices, ARRAY_SIZE(m5206e_devices)); - return 0; -} - -arch_initcall(init_BSP); - -/***************************************************************************/ diff --git a/arch/m68k/platform/5206e/gpio.c b/arch/m68k/platform/5206e/gpio.c deleted file mode 100644 index b9ab4a120f2..00000000000 --- a/arch/m68k/platform/5206e/gpio.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Coldfire generic GPIO support - * - * (C) Copyright 2009, Steven King <sfking@fdwdc.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. -*/ - -#include <linux/kernel.h> -#include <linux/init.h> - -#include <asm/coldfire.h> -#include <asm/mcfsim.h> -#include <asm/mcfgpio.h> - -static struct mcf_gpio_chip mcf_gpio_chips[] = { - { - .gpio_chip = { - .label = "PP", - .request = mcf_gpio_request, - .free = mcf_gpio_free, - .direction_input = mcf_gpio_direction_input, - .direction_output = mcf_gpio_direction_output, - .get = mcf_gpio_get_value, - .set = mcf_gpio_set_value, - .ngpio = 8, - }, - .pddr = (void __iomem *) MCFSIM_PADDR, - .podr = (void __iomem *) MCFSIM_PADAT, - .ppdr = (void __iomem *) MCFSIM_PADAT, - }, -}; - -static int __init mcf_gpio_init(void) -{ - unsigned i = 0; - while (i < ARRAY_SIZE(mcf_gpio_chips)) - (void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]); - return 0; -} - -core_initcall(mcf_gpio_init); diff --git a/arch/m68k/platform/5272/intc.c b/arch/m68k/platform/5272/intc.c index 7e715dfe281..7160e618b0a 100644 --- a/arch/m68k/platform/5272/intc.c +++ b/arch/m68k/platform/5272/intc.c @@ -162,8 +162,6 @@ void __init init_IRQ(void) { int irq, edge; - init_vectors(); - /* Mask all interrupt sources */ writel(0x88888888, MCF_MBAR + MCFSIM_ICR1); writel(0x88888888, MCF_MBAR + MCFSIM_ICR2); diff --git a/arch/m68k/platform/68328/entry.S b/arch/m68k/platform/68328/entry.S index f68dce766c0..293e1eba9ac 100644 --- a/arch/m68k/platform/68328/entry.S +++ b/arch/m68k/platform/68328/entry.S @@ -236,27 +236,26 @@ ret_from_interrupt: * Handler for uninitialized and spurious interrupts. */ ENTRY(bad_interrupt) - addql #1,num_spurious + addql #1,irq_err_count rte /* * Beware - when entering resume, prev (the current task) is - * in a0, next (the new task) is in a1,so don't change these + * in a0, next (the new task) is in a1, so don't change these * registers until their contents are no longer needed. */ ENTRY(resume) movel %a0,%d1 /* save prev thread in d1 */ movew %sr,%a0@(TASK_THREAD+THREAD_SR) /* save sr */ - movel %usp,%a2 /* save usp */ - movel %a2,%a0@(TASK_THREAD+THREAD_USP) - SAVE_SWITCH_STACK movel %sp,%a0@(TASK_THREAD+THREAD_KSP) /* save kernel stack */ + movel %usp,%a3 /* save usp */ + movel %a3,%a0@(TASK_THREAD+THREAD_USP) + + movel %a1@(TASK_THREAD+THREAD_USP),%a3 /* restore user stack */ + movel %a3,%usp movel %a1@(TASK_THREAD+THREAD_KSP),%sp /* restore new thread stack */ RESTORE_SWITCH_STACK - - movel %a1@(TASK_THREAD+THREAD_USP),%a0 /* restore user stack */ - movel %a0,%usp movew %a1@(TASK_THREAD+THREAD_SR),%sr /* restore thread status reg */ rts diff --git a/arch/m68k/platform/68328/ints.c b/arch/m68k/platform/68328/ints.c index a90288cf744..4bd456531f9 100644 --- a/arch/m68k/platform/68328/ints.c +++ b/arch/m68k/platform/68328/ints.c @@ -70,9 +70,6 @@ asmlinkage irqreturn_t inthandler7(void); extern e_vector *_ramvec; -/* The number of spurious interrupts */ -volatile unsigned int num_spurious; - /* The 68k family did not have a good way to determine the source * of interrupts until later in the family. The EC000 core does * not provide the vector number on the stack, we vector everything @@ -155,7 +152,7 @@ static struct irq_chip intc_irq_chip = { * This function should be called during kernel startup to initialize * the machine vector table. */ -void __init init_IRQ(void) +void __init trap_init(void) { int i; @@ -172,6 +169,11 @@ void __init init_IRQ(void) _ramvec[69] = (e_vector) inthandler5; _ramvec[70] = (e_vector) inthandler6; _ramvec[71] = (e_vector) inthandler7; +} + +void __init init_IRQ(void) +{ + int i; IVR = 0x40; /* Set DragonBall IVR (interrupt base) to 64 */ diff --git a/arch/m68k/platform/68360/entry.S b/arch/m68k/platform/68360/entry.S index a07b14feed9..abbb89672ea 100644 --- a/arch/m68k/platform/68360/entry.S +++ b/arch/m68k/platform/68360/entry.S @@ -157,27 +157,26 @@ ret_from_interrupt: * Handler for uninitialized and spurious interrupts. */ bad_interrupt: - addql #1,num_spurious + addql #1,irq_err_count rte /* * Beware - when entering resume, prev (the current task) is - * in a0, next (the new task) is in a1,so don't change these + * in a0, next (the new task) is in a1, so don't change these * registers until their contents are no longer needed. */ ENTRY(resume) movel %a0,%d1 /* save prev thread in d1 */ movew %sr,%a0@(TASK_THREAD+THREAD_SR) /* save sr */ - movel %usp,%a2 /* save usp */ - movel %a2,%a0@(TASK_THREAD+THREAD_USP) - SAVE_SWITCH_STACK movel %sp,%a0@(TASK_THREAD+THREAD_KSP) /* save kernel stack */ + movel %usp,%a3 /* save usp */ + movel %a3,%a0@(TASK_THREAD+THREAD_USP) + + movel %a1@(TASK_THREAD+THREAD_USP),%a3 /* restore user stack */ + movel %a3,%usp movel %a1@(TASK_THREAD+THREAD_KSP),%sp /* restore new thread stack */ RESTORE_SWITCH_STACK - - movel %a1@(TASK_THREAD+THREAD_USP),%a0 /* restore user stack */ - movel %a0,%usp movew %a1@(TASK_THREAD+THREAD_SR),%sr /* restore thread status reg */ rts diff --git a/arch/m68k/platform/68360/ints.c b/arch/m68k/platform/68360/ints.c index 4af0f4e30f7..7b40202d963 100644 --- a/arch/m68k/platform/68360/ints.c +++ b/arch/m68k/platform/68360/ints.c @@ -34,9 +34,6 @@ asmlinkage void inthandler(void); extern void *_ramvec[]; -/* The number of spurious interrupts */ -volatile unsigned int num_spurious; - static void intc_irq_unmask(struct irq_data *d) { pquicc->intr_cimr |= (1 << d->irq); @@ -63,9 +60,8 @@ static struct irq_chip intc_irq_chip = { * This function should be called during kernel startup to initialize * the vector table. */ -void init_IRQ(void) +void __init trap_init(void) { - int i; int vba = (CPM_VECTOR_BASE<<4); /* set up the vectors */ @@ -130,6 +126,11 @@ void init_IRQ(void) /* turn off all CPM interrupts */ pquicc->intr_cimr = 0x00000000; +} + +void init_IRQ(void) +{ + int i; for (i = 0; (i < NR_IRQS); i++) { irq_set_chip(i, &intc_irq_chip); diff --git a/arch/m68k/platform/coldfire/entry.S b/arch/m68k/platform/coldfire/entry.S index 27c2b001161..bd27242c2f4 100644 --- a/arch/m68k/platform/coldfire/entry.S +++ b/arch/m68k/platform/coldfire/entry.S @@ -182,21 +182,23 @@ ENTRY(inthandler) /* * Beware - when entering resume, prev (the current task) is - * in a0, next (the new task) is in a1,so don't change these + * in a0, next (the new task) is in a1, so don't change these * registers until their contents are no longer needed. - * This is always called in supervisor mode, so don't bother to save - * and restore sr; user's process sr is actually in the stack. */ ENTRY(resume) - movel %a0, %d1 /* get prev thread in d1 */ - RDUSP - movel %a2,%a0@(TASK_THREAD+THREAD_USP) - + movew %sr,%d1 /* save current status */ + movew %d1,%a0@(TASK_THREAD+THREAD_SR) + movel %a0,%d1 /* get prev thread in d1 */ SAVE_SWITCH_STACK movel %sp,%a0@(TASK_THREAD+THREAD_KSP) /* save kernel stack pointer */ - movel %a1@(TASK_THREAD+THREAD_KSP),%sp /* restore new thread stack */ + RDUSP /* movel %usp,%a3 */ + movel %a3,%a0@(TASK_THREAD+THREAD_USP) /* save thread user stack */ + + movel %a1@(TASK_THREAD+THREAD_USP),%a3 /* restore thread user stack */ + WRUSP /* movel %a3,%usp */ + movel %a1@(TASK_THREAD+THREAD_KSP),%sp /* restore new kernel stack */ + movew %a1@(TASK_THREAD+THREAD_SR),%d7 /* restore new status */ + movew %d7,%sr RESTORE_SWITCH_STACK - - movel %a1@(TASK_THREAD+THREAD_USP),%a0 /* restore thread user stack */ - WRUSP rts + diff --git a/arch/m68k/platform/coldfire/intc-2.c b/arch/m68k/platform/coldfire/intc-2.c index 74b55cfbc3c..995093357c5 100644 --- a/arch/m68k/platform/coldfire/intc-2.c +++ b/arch/m68k/platform/coldfire/intc-2.c @@ -194,8 +194,6 @@ void __init init_IRQ(void) { int irq; - init_vectors(); - /* Mask all interrupt sources */ __raw_writel(0x1, MCFICM_INTC0 + MCFINTC_IMRL); #ifdef MCFICM_INTC1 diff --git a/arch/m68k/platform/coldfire/intc-simr.c b/arch/m68k/platform/coldfire/intc-simr.c index d6a4d9d53e4..650d52e2927 100644 --- a/arch/m68k/platform/coldfire/intc-simr.c +++ b/arch/m68k/platform/coldfire/intc-simr.c @@ -171,8 +171,6 @@ void __init init_IRQ(void) { int irq, eirq; - init_vectors(); - /* Mask all interrupt sources */ __raw_writeb(0xff, MCFINTC0_SIMR); if (MCFINTC1_SIMR) diff --git a/arch/m68k/platform/coldfire/intc.c b/arch/m68k/platform/coldfire/intc.c index 0bbb414856e..5c0c150b406 100644 --- a/arch/m68k/platform/coldfire/intc.c +++ b/arch/m68k/platform/coldfire/intc.c @@ -139,7 +139,6 @@ void __init init_IRQ(void) { int irq; - init_vectors(); mcf_maskimr(0xffffffff); for (irq = 0; (irq < NR_IRQS); irq++) { diff --git a/arch/m68k/platform/coldfire/vectors.c b/arch/m68k/platform/coldfire/vectors.c index a21d3f870b7..3a7cc524ecd 100644 --- a/arch/m68k/platform/coldfire/vectors.c +++ b/arch/m68k/platform/coldfire/vectors.c @@ -35,21 +35,13 @@ asmlinkage void dbginterrupt_c(struct frame *fp) extern e_vector *_ramvec; -void set_evector(int vecnum, void (*handler)(void)) -{ - if (vecnum >= 0 && vecnum <= 255) - _ramvec[vecnum] = handler; -} - -/***************************************************************************/ - /* Assembler routines */ asmlinkage void buserr(void); asmlinkage void trap(void); asmlinkage void system_call(void); asmlinkage void inthandler(void); -void __init init_vectors(void) +void __init trap_init(void) { int i; |