summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/ia64/configs/generic_defconfig2
-rw-r--r--arch/ia64/dig/Makefile2
-rw-r--r--arch/ia64/include/asm/device.h2
-rw-r--r--arch/ia64/include/asm/iommu.h6
-rw-r--r--arch/ia64/include/asm/pci.h2
-rw-r--r--arch/ia64/kernel/Makefile2
-rw-r--r--arch/ia64/kernel/acpi.c4
-rw-r--r--arch/ia64/kernel/msi_ia64.c4
-rw-r--r--arch/ia64/kernel/pci-dma.c2
-rw-r--r--arch/x86/Kconfig6
-rw-r--r--arch/x86/configs/x86_64_defconfig4
-rw-r--r--arch/x86/include/asm/device.h2
-rw-r--r--arch/x86/include/asm/hw_irq.h2
-rw-r--r--arch/x86/include/asm/irq_remapping.h6
-rw-r--r--arch/x86/kernel/apic/apic.c33
-rw-r--r--arch/x86/kernel/apic/io_apic.c284
16 files changed, 180 insertions, 183 deletions
diff --git a/arch/ia64/configs/generic_defconfig b/arch/ia64/configs/generic_defconfig
index 0e5cd1405e0..43ab1cd097a 100644
--- a/arch/ia64/configs/generic_defconfig
+++ b/arch/ia64/configs/generic_defconfig
@@ -234,4 +234,4 @@ CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRC_T10DIF=y
CONFIG_MISC_DEVICES=y
-CONFIG_DMAR=y
+CONFIG_INTEL_IOMMU=y
diff --git a/arch/ia64/dig/Makefile b/arch/ia64/dig/Makefile
index 2f7caddf093..ae16ec4f630 100644
--- a/arch/ia64/dig/Makefile
+++ b/arch/ia64/dig/Makefile
@@ -6,7 +6,7 @@
#
obj-y := setup.o
-ifeq ($(CONFIG_DMAR), y)
+ifeq ($(CONFIG_INTEL_IOMMU), y)
obj-$(CONFIG_IA64_GENERIC) += machvec.o machvec_vtd.o
else
obj-$(CONFIG_IA64_GENERIC) += machvec.o
diff --git a/arch/ia64/include/asm/device.h b/arch/ia64/include/asm/device.h
index d66d446b127..d05e78f6db9 100644
--- a/arch/ia64/include/asm/device.h
+++ b/arch/ia64/include/asm/device.h
@@ -10,7 +10,7 @@ struct dev_archdata {
#ifdef CONFIG_ACPI
void *acpi_handle;
#endif
-#ifdef CONFIG_DMAR
+#ifdef CONFIG_INTEL_IOMMU
void *iommu; /* hook for IOMMU specific extension */
#endif
};
diff --git a/arch/ia64/include/asm/iommu.h b/arch/ia64/include/asm/iommu.h
index 745e095fe82..105c93b00b1 100644
--- a/arch/ia64/include/asm/iommu.h
+++ b/arch/ia64/include/asm/iommu.h
@@ -7,12 +7,14 @@
extern void pci_iommu_shutdown(void);
extern void no_iommu_init(void);
+#ifdef CONFIG_INTEL_IOMMU
extern int force_iommu, no_iommu;
-extern int iommu_detected;
-#ifdef CONFIG_DMAR
extern int iommu_pass_through;
+extern int iommu_detected;
#else
#define iommu_pass_through (0)
+#define no_iommu (1)
+#define iommu_detected (0)
#endif
extern void iommu_dma_init(void);
extern void machvec_init(const char *name);
diff --git a/arch/ia64/include/asm/pci.h b/arch/ia64/include/asm/pci.h
index 73b5f785e70..127dd7be346 100644
--- a/arch/ia64/include/asm/pci.h
+++ b/arch/ia64/include/asm/pci.h
@@ -139,7 +139,7 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
return channel ? isa_irq_to_vector(15) : isa_irq_to_vector(14);
}
-#ifdef CONFIG_DMAR
+#ifdef CONFIG_INTEL_IOMMU
extern void pci_iommu_alloc(void);
#endif
#endif /* _ASM_IA64_PCI_H */
diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile
index 395c2f216dd..d959c84904b 100644
--- a/arch/ia64/kernel/Makefile
+++ b/arch/ia64/kernel/Makefile
@@ -43,7 +43,7 @@ obj-$(CONFIG_IA64_ESI) += esi.o
ifneq ($(CONFIG_IA64_ESI),)
obj-y += esi_stub.o # must be in kernel proper
endif
-obj-$(CONFIG_DMAR) += pci-dma.o
+obj-$(CONFIG_INTEL_IOMMU) += pci-dma.o
obj-$(CONFIG_SWIOTLB) += pci-swiotlb.o
obj-$(CONFIG_BINFMT_ELF) += elfcore.o
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index 3be485a300b..bfb4d01e0e5 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -88,7 +88,7 @@ acpi_get_sysname(void)
struct acpi_table_rsdp *rsdp;
struct acpi_table_xsdt *xsdt;
struct acpi_table_header *hdr;
-#ifdef CONFIG_DMAR
+#ifdef CONFIG_INTEL_IOMMU
u64 i, nentries;
#endif
@@ -125,7 +125,7 @@ acpi_get_sysname(void)
return "xen";
}
-#ifdef CONFIG_DMAR
+#ifdef CONFIG_INTEL_IOMMU
/* Look for Intel IOMMU */
nentries = (hdr->length - sizeof(*hdr)) /
sizeof(xsdt->table_offset_entry[0]);
diff --git a/arch/ia64/kernel/msi_ia64.c b/arch/ia64/kernel/msi_ia64.c
index 009df5434a7..94e0db72d4a 100644
--- a/arch/ia64/kernel/msi_ia64.c
+++ b/arch/ia64/kernel/msi_ia64.c
@@ -131,7 +131,7 @@ void arch_teardown_msi_irq(unsigned int irq)
return ia64_teardown_msi_irq(irq);
}
-#ifdef CONFIG_DMAR
+#ifdef CONFIG_INTEL_IOMMU
#ifdef CONFIG_SMP
static int dmar_msi_set_affinity(struct irq_data *data,
const struct cpumask *mask, bool force)
@@ -210,5 +210,5 @@ int arch_setup_dmar_msi(unsigned int irq)
"edge");
return 0;
}
-#endif /* CONFIG_DMAR */
+#endif /* CONFIG_INTEL_IOMMU */
diff --git a/arch/ia64/kernel/pci-dma.c b/arch/ia64/kernel/pci-dma.c
index f6b1ff0aea7..c16162c7086 100644
--- a/arch/ia64/kernel/pci-dma.c
+++ b/arch/ia64/kernel/pci-dma.c
@@ -14,7 +14,7 @@
#include <asm/system.h>
-#ifdef CONFIG_DMAR
+#ifdef CONFIG_INTEL_IOMMU
#include <linux/kernel.h>
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 9a4a267a8a5..9037289617a 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -130,7 +130,7 @@ config SBUS
bool
config NEED_DMA_MAP_STATE
- def_bool (X86_64 || DMAR || DMA_API_DEBUG)
+ def_bool (X86_64 || INTEL_IOMMU || DMA_API_DEBUG)
config NEED_SG_DMA_LENGTH
def_bool y
@@ -220,7 +220,7 @@ config ARCH_SUPPORTS_DEBUG_PAGEALLOC
config HAVE_INTEL_TXT
def_bool y
- depends on EXPERIMENTAL && DMAR && ACPI
+ depends on EXPERIMENTAL && INTEL_IOMMU && ACPI
config X86_32_SMP
def_bool y
@@ -287,7 +287,7 @@ config SMP
config X86_X2APIC
bool "Support x2apic"
- depends on X86_LOCAL_APIC && X86_64 && INTR_REMAP
+ depends on X86_LOCAL_APIC && X86_64 && IRQ_REMAP
---help---
This enables x2apic support on CPUs that have this feature.
diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index 22a0dc8e51d..058a35b8286 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -67,8 +67,8 @@ CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_PCI_MMCONFIG=y
-CONFIG_DMAR=y
-# CONFIG_DMAR_DEFAULT_ON is not set
+CONFIG_INTEL_IOMMU=y
+# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCCARD=y
CONFIG_YENTA=y
diff --git a/arch/x86/include/asm/device.h b/arch/x86/include/asm/device.h
index 029f230ab63..63a2a03d7d5 100644
--- a/arch/x86/include/asm/device.h
+++ b/arch/x86/include/asm/device.h
@@ -8,7 +8,7 @@ struct dev_archdata {
#ifdef CONFIG_X86_64
struct dma_map_ops *dma_ops;
#endif
-#if defined(CONFIG_DMAR) || defined(CONFIG_AMD_IOMMU)
+#if defined(CONFIG_INTEL_IOMMU) || defined(CONFIG_AMD_IOMMU)
void *iommu; /* hook for IOMMU specific extension */
#endif
};
diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h
index 09199052060..eb92a6ed2be 100644
--- a/arch/x86/include/asm/hw_irq.h
+++ b/arch/x86/include/asm/hw_irq.h
@@ -119,7 +119,7 @@ struct irq_cfg {
cpumask_var_t old_domain;
u8 vector;
u8 move_in_progress : 1;
-#ifdef CONFIG_INTR_REMAP
+#ifdef CONFIG_IRQ_REMAP
struct irq_2_iommu irq_2_iommu;
#endif
};
diff --git a/arch/x86/include/asm/irq_remapping.h b/arch/x86/include/asm/irq_remapping.h
index 1c23360fb2d..47d99934580 100644
--- a/arch/x86/include/asm/irq_remapping.h
+++ b/arch/x86/include/asm/irq_remapping.h
@@ -3,7 +3,8 @@
#define IRTE_DEST(dest) ((x2apic_mode) ? dest : dest << 8)
-#ifdef CONFIG_INTR_REMAP
+#ifdef CONFIG_IRQ_REMAP
+static void irq_remap_modify_chip_defaults(struct irq_chip *chip);
static inline void prepare_irte(struct irte *irte, int vector,
unsigned int dest)
{
@@ -36,6 +37,9 @@ static inline bool irq_remapped(struct irq_cfg *cfg)
{
return false;
}
+static inline void irq_remap_modify_chip_defaults(struct irq_chip *chip)
+{
+}
#endif
#endif /* _ASM_X86_IRQ_REMAPPING_H */
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 52fa56399a5..a2fd72e0ab3 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1437,27 +1437,21 @@ void enable_x2apic(void)
int __init enable_IR(void)
{
-#ifdef CONFIG_INTR_REMAP
+#ifdef CONFIG_IRQ_REMAP
if (!intr_remapping_supported()) {
pr_debug("intr-remapping not supported\n");
- return 0;
+ return -1;
}
if (!x2apic_preenabled && skip_ioapic_setup) {
pr_info("Skipped enabling intr-remap because of skipping "
"io-apic setup\n");
- return 0;
+ return -1;
}
- if (enable_intr_remapping(x2apic_supported()))
- return 0;
-
- pr_info("Enabled Interrupt-remapping\n");
-
- return 1;
-
+ return enable_intr_remapping();
#endif
- return 0;
+ return -1;
}
void __init enable_IR_x2apic(void)
@@ -1481,11 +1475,11 @@ void __init enable_IR_x2apic(void)
mask_ioapic_entries();
if (dmar_table_init_ret)
- ret = 0;
+ ret = -1;
else
ret = enable_IR();
- if (!ret) {
+ if (ret < 0) {
/* IR is required if there is APIC ID > 255 even when running
* under KVM
*/
@@ -1499,6 +1493,9 @@ void __init enable_IR_x2apic(void)
x2apic_force_phys();
}
+ if (ret == IRQ_REMAP_XAPIC_MODE)
+ goto nox2apic;
+
x2apic_enabled = 1;
if (x2apic_supported() && !x2apic_mode) {
@@ -1508,19 +1505,21 @@ void __init enable_IR_x2apic(void)
}
nox2apic:
- if (!ret) /* IR enabling failed */
+ if (ret < 0) /* IR enabling failed */
restore_ioapic_entries();
legacy_pic->restore_mask();
local_irq_restore(flags);
out:
- if (x2apic_enabled)
+ if (x2apic_enabled || !x2apic_supported())
return;
if (x2apic_preenabled)
panic("x2apic: enabled by BIOS but kernel init failed.");
- else if (cpu_has_x2apic)
- pr_info("Not enabling x2apic, Intr-remapping init failed.\n");
+ else if (ret == IRQ_REMAP_XAPIC_MODE)
+ pr_info("x2apic not enabled, IRQ remapping is in xapic mode\n");
+ else if (ret < 0)
+ pr_info("x2apic not enabled, IRQ remapping init failed\n");
}
#ifdef CONFIG_X86_64
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 8eb863e27ea..229e19f3eb5 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -394,13 +394,21 @@ union entry_union {
struct IO_APIC_route_entry entry;
};
+static struct IO_APIC_route_entry __ioapic_read_entry(int apic, int pin)
+{
+ union entry_union eu;
+
+ eu.w1 = io_apic_read(apic, 0x10 + 2 * pin);
+ eu.w2 = io_apic_read(apic, 0x11 + 2 * pin);
+ return eu.entry;
+}
+
static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin)
{
union entry_union eu;
unsigned long flags;
raw_spin_lock_irqsave(&ioapic_lock, flags);
- eu.w1 = io_apic_read(apic, 0x10 + 2 * pin);
- eu.w2 = io_apic_read(apic, 0x11 + 2 * pin);
+ eu.entry = __ioapic_read_entry(apic, pin);
raw_spin_unlock_irqrestore(&ioapic_lock, flags);
return eu.entry;
}
@@ -529,18 +537,6 @@ static void io_apic_modify_irq(struct irq_cfg *cfg,
__io_apic_modify_irq(entry, mask_and, mask_or, final);
}
-static void __mask_and_edge_IO_APIC_irq(struct irq_pin_list *entry)
-{
- __io_apic_modify_irq(entry, ~IO_APIC_REDIR_LEVEL_TRIGGER,
- IO_APIC_REDIR_MASKED, NULL);
-}
-
-static void __unmask_and_level_IO_APIC_irq(struct irq_pin_list *entry)
-{
- __io_apic_modify_irq(entry, ~IO_APIC_REDIR_MASKED,
- IO_APIC_REDIR_LEVEL_TRIGGER, NULL);
-}
-
static void io_apic_sync(struct irq_pin_list *entry)
{
/*
@@ -585,6 +581,66 @@ static void unmask_ioapic_irq(struct irq_data *data)
unmask_ioapic(data->chip_data);
}
+/*
+ * IO-APIC versions below 0x20 don't support EOI register.
+ * For the record, here is the information about various versions:
+ * 0Xh 82489DX
+ * 1Xh I/OAPIC or I/O(x)APIC which are not PCI 2.2 Compliant
+ * 2Xh I/O(x)APIC which is PCI 2.2 Compliant
+ * 30h-FFh Reserved
+ *
+ * Some of the Intel ICH Specs (ICH2 to ICH5) documents the io-apic
+ * version as 0x2. This is an error with documentation and these ICH chips
+ * use io-apic's of version 0x20.
+ *
+ * For IO-APIC's with EOI register, we use that to do an explicit EOI.
+ * Otherwise, we simulate the EOI message manually by changing the trigger
+ * mode to edge and then back to level, with RTE being masked during this.
+ */
+static void __eoi_ioapic_pin(int apic, int pin, int vector, struct irq_cfg *cfg)
+{
+ if (mpc_ioapic_ver(apic) >= 0x20) {
+ /*
+ * Intr-remapping uses pin number as the virtual vector
+ * in the RTE. Actual vector is programmed in
+ * intr-remapping table entry. Hence for the io-apic
+ * EOI we use the pin number.
+ */
+ if (cfg && irq_remapped(cfg))
+ io_apic_eoi(apic, pin);
+ else
+ io_apic_eoi(apic, vector);
+ } else {
+ struct IO_APIC_route_entry entry, entry1;
+
+ entry = entry1 = __ioapic_read_entry(apic, pin);
+
+ /*
+ * Mask the entry and change the trigger mode to edge.
+ */
+ entry1.mask = 1;
+ entry1.trigger = IOAPIC_EDGE;
+
+ __ioapic_write_entry(apic, pin, entry1);
+
+ /*
+ * Restore the previous level triggered entry.
+ */
+ __ioapic_write_entry(apic, pin, entry);
+ }
+}
+
+static void eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg)
+{
+ struct irq_pin_list *entry;
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&ioapic_lock, flags);
+ for_each_irq_pin(entry, cfg->irq_2_pin)
+ __eoi_ioapic_pin(entry->apic, entry->pin, cfg->vector, cfg);
+ raw_spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+
static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
{
struct IO_APIC_route_entry entry;
@@ -593,10 +649,44 @@ static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
entry = ioapic_read_entry(apic, pin);
if (entry.delivery_mode == dest_SMI)
return;
+
+ /*
+ * Make sure the entry is masked and re-read the contents to check
+ * if it is a level triggered pin and if the remote-IRR is set.
+ */
+ if (!entry.mask) {
+ entry.mask = 1;
+ ioapic_write_entry(apic, pin, entry);
+ entry = ioapic_read_entry(apic, pin);
+ }
+
+ if (entry.irr) {
+ unsigned long flags;
+
+ /*
+ * Make sure the trigger mode is set to level. Explicit EOI
+ * doesn't clear the remote-IRR if the trigger mode is not
+ * set to level.
+ */
+ if (!entry.trigger) {
+ entry.trigger = IOAPIC_LEVEL;
+ ioapic_write_entry(apic, pin, entry);
+ }
+
+ raw_spin_lock_irqsave(&ioapic_lock, flags);
+ __eoi_ioapic_pin(apic, pin, entry.vector, NULL);
+ raw_spin_unlock_irqrestore(&ioapic_lock, flags);
+ }
+
/*
- * Disable it in the IO-APIC irq-routing table:
+ * Clear the rest of the bits in the IO-APIC RTE except for the mask
+ * bit.
*/
ioapic_mask_entry(apic, pin);
+ entry = ioapic_read_entry(apic, pin);
+ if (entry.irr)
+ printk(KERN_ERR "Unable to reset IRR for apic: %d, pin :%d\n",
+ mpc_ioapic_id(apic), pin);
}
static void clear_IO_APIC (void)
@@ -1202,7 +1292,6 @@ void __setup_vector_irq(int cpu)
}
static struct irq_chip ioapic_chip;
-static struct irq_chip ir_ioapic_chip;
#ifdef CONFIG_X86_32
static inline int IO_APIC_irq_trigger(int irq)
@@ -1246,7 +1335,7 @@ static void ioapic_register_intr(unsigned int irq, struct irq_cfg *cfg,
if (irq_remapped(cfg)) {
irq_set_status_flags(irq, IRQ_MOVE_PCNTXT);
- chip = &ir_ioapic_chip;
+ irq_remap_modify_chip_defaults(chip);
fasteoi = trigger != 0;
}
@@ -2255,7 +2344,7 @@ ioapic_set_affinity(struct irq_data *data, const struct cpumask *mask,
return ret;
}
-#ifdef CONFIG_INTR_REMAP
+#ifdef CONFIG_IRQ_REMAP
/*
* Migrate the IO-APIC irq in the presence of intr-remapping.
@@ -2267,6 +2356,9 @@ ioapic_set_affinity(struct irq_data *data, const struct cpumask *mask,
* updated vector information), by using a virtual vector (io-apic pin number).
* Real vector that is used for interrupting cpu will be coming from
* the interrupt-remapping table entry.
+ *
+ * As the migration is a simple atomic update of IRTE, the same mechanism
+ * is used to migrate MSI irq's in the presence of interrupt-remapping.
*/
static int
ir_ioapic_set_affinity(struct irq_data *data, const struct cpumask *mask,
@@ -2291,10 +2383,16 @@ ir_ioapic_set_affinity(struct irq_data *data, const struct cpumask *mask,
irte.dest_id = IRTE_DEST(dest);
/*
- * Modified the IRTE and flushes the Interrupt entry cache.
+ * Atomically updates the IRTE with the new destination, vector
+ * and flushes the interrupt entry cache.
*/
modify_irte(irq, &irte);
+ /*
+ * After this point, all the interrupts will start arriving
+ * at the new destination. So, time to cleanup the previous
+ * vector allocation.
+ */
if (cfg->move_in_progress)
send_cleanup_vector(cfg);
@@ -2407,48 +2505,6 @@ static void ack_apic_edge(struct irq_data *data)
atomic_t irq_mis_count;
-/*
- * IO-APIC versions below 0x20 don't support EOI register.
- * For the record, here is the information about various versions:
- * 0Xh 82489DX
- * 1Xh I/OAPIC or I/O(x)APIC which are not PCI 2.2 Compliant
- * 2Xh I/O(x)APIC which is PCI 2.2 Compliant
- * 30h-FFh Reserved
- *
- * Some of the Intel ICH Specs (ICH2 to ICH5) documents the io-apic
- * version as 0x2. This is an error with documentation and these ICH chips
- * use io-apic's of version 0x20.
- *
- * For IO-APIC's with EOI register, we use that to do an explicit EOI.
- * Otherwise, we simulate the EOI message manually by changing the trigger
- * mode to edge and then back to level, with RTE being masked during this.
-*/
-static void eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg)
-{
- struct irq_pin_list *entry;
- unsigned long flags;
-
- raw_spin_lock_irqsave(&ioapic_lock, flags);
- for_each_irq_pin(entry, cfg->irq_2_pin) {
- if (mpc_ioapic_ver(entry->apic) >= 0x20) {
- /*
- * Intr-remapping uses pin number as the virtual vector
- * in the RTE. Actual vector is programmed in
- * intr-remapping table entry. Hence for the io-apic
- * EOI we use the pin number.
- */
- if (irq_remapped(cfg))
- io_apic_eoi(entry->apic, entry->pin);
- else
- io_apic_eoi(entry->apic, cfg->vector);
- } else {
- __mask_and_edge_IO_APIC_irq(entry);
- __unmask_and_level_IO_APIC_irq(entry);
- }
- }
- raw_spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-
static void ack_apic_level(struct irq_data *data)
{
struct irq_cfg *cfg = data->chip_data;
@@ -2552,7 +2608,7 @@ static void ack_apic_level(struct irq_data *data)
}
}
-#ifdef CONFIG_INTR_REMAP
+#ifdef CONFIG_IRQ_REMAP
static void ir_ack_apic_edge(struct irq_data *data)
{
ack_APIC_irq();
@@ -2563,7 +2619,23 @@ static void ir_ack_apic_level(struct irq_data *data)
ack_APIC_irq();
eoi_ioapic_irq(data->irq, data->chip_data);
}
-#endif /* CONFIG_INTR_REMAP */
+
+static void ir_print_prefix(struct irq_data *data, struct seq_file *p)
+{
+ seq_printf(p, " IR-%s", data->chip->name);
+}
+
+static void irq_remap_modify_chip_defaults(struct irq_chip *chip)
+{
+ chip->irq_print_chip = ir_print_prefix;
+ chip->irq_ack = ir_ack_apic_edge;
+ chip->irq_eoi = ir_ack_apic_level;
+
+#ifdef CONFIG_SMP
+ chip->irq_set_affinity = ir_ioapic_set_affinity;
+#endif
+}
+#endif /* CONFIG_IRQ_REMAP */
static struct irq_chip ioapic_chip __read_mostly = {
.name = "IO-APIC",
@@ -2578,21 +2650,6 @@ static struct irq_chip ioapic_chip __read_mostly = {
.irq_retrigger = ioapic_retrigger_irq,
};
-static struct irq_chip ir_ioapic_chip __read_mostly = {
- .name = "IR-IO-APIC",
- .irq_startup = startup_ioapic_irq,
- .irq_mask = mask_ioapic_irq,
- .irq_unmask = unmask_ioapic_irq,
-#ifdef CONFIG_INTR_REMAP
- .irq_ack = ir_ack_apic_edge,
- .irq_eoi = ir_ack_apic_level,
-#ifdef CONFIG_SMP
- .irq_set_affinity = ir_ioapic_set_affinity,
-#endif
-#endif
- .irq_retrigger = ioapic_retrigger_irq,
-};
-
static inline void init_IO_APIC_traps(void)
{
struct irq_cfg *cfg;
@@ -3144,45 +3201,6 @@ msi_set_affinity(struct irq_data *data, const struct cpumask *mask, bool force)
return 0;
}
-#ifdef CONFIG_INTR_REMAP
-/*
- * Migrate the MSI irq to another cpumask. This migration is
- * done in the process context using interrupt-remapping hardware.
- */
-static int
-ir_msi_set_affinity(struct irq_data *data, const struct cpumask *mask,
- bool force)
-{
- struct irq_cfg *cfg = data->chip_data;
- unsigned int dest, irq = data->irq;
- struct irte irte;
-
- if (get_irte(irq, &irte))
- return -1;
-
- if (__ioapic_set_affinity(data, mask, &dest))
- return -1;
-
- irte.vector = cfg->vector;
- irte.dest_id = IRTE_DEST(dest);
-
- /*
- * atomically update the IRTE with the new destination and vector.
- */
- modify_irte(irq, &irte);
-
- /*
- * After this point, all the interrupts will start arriving
- * at the new destination. So, time to cleanup the previous
- * vector allocation.
- */
- if (cfg->move_in_progress)
- send_cleanup_vector(cfg);
-
- return 0;
-}
-
-#endif
#endif /* CONFIG_SMP */
/*
@@ -3200,19 +3218,6 @@ static struct irq_chip msi_chip = {
.irq_retrigger = ioapic_retrigger_irq,
};
-static struct irq_chip msi_ir_chip = {
- .name = "IR-PCI-MSI",
- .irq_unmask = unmask_msi_irq,
- .irq_mask = mask_msi_irq,
-#ifdef CONFIG_INTR_REMAP
- .irq_ack = ir_ack_apic_edge,
-#ifdef CONFIG_SMP
- .irq_set_affinity = ir_msi_set_affinity,
-#endif
-#endif
- .irq_retrigger = ioapic_retrigger_irq,
-};
-
/*
* Map the PCI dev to the corresponding remapping hardware unit
* and allocate 'nvec' consecutive interrupt-remapping table entries
@@ -3255,7 +3260,7 @@ static int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc, int irq)
if (irq_remapped(irq_get_chip_data(irq))) {
irq_set_status_flags(irq, IRQ_MOVE_PCNTXT);
- chip = &msi_ir_chip;
+ irq_remap_modify_chip_defaults(chip);
}
irq_set_chip_and_handler_name(irq, chip, handle_edge_irq, "edge");
@@ -3328,7 +3333,7 @@ void native_teardown_msi_irq(unsigned int irq)
destroy_irq(irq);
}
-#if defined (CONFIG_DMAR) || defined (CONFIG_INTR_REMAP)
+#ifdef CONFIG_DMAR_TABLE
#ifdef CONFIG_SMP
static int
dmar_msi_set_affinity(struct irq_data *data, const struct cpumask *mask,
@@ -3409,19 +3414,6 @@ static int hpet_msi_set_affinity(struct irq_data *data,
#endif /* CONFIG_SMP */
-static struct irq_chip ir_hpet_msi_type = {
- .name = "IR-HPET_MSI",
- .irq_unmask = hpet_msi_unmask,
- .irq_mask = hpet_msi_mask,
-#ifdef CONFIG_INTR_REMAP
- .irq_ack = ir_ack_apic_edge,
-#ifdef CONFIG_SMP
- .irq_set_affinity = ir_msi_set_affinity,
-#endif
-#endif
- .irq_retrigger = ioapic_retrigger_irq,
-};
-
static struct irq_chip hpet_msi_type = {
.name = "HPET_MSI",
.irq_unmask = hpet_msi_unmask,
@@ -3458,7 +3450,7 @@ int arch_setup_hpet_msi(unsigned int irq, unsigned int id)
hpet_msi_write(irq_get_handler_data(irq), &msg);
irq_set_status_flags(irq, IRQ_MOVE_PCNTXT);
if (irq_remapped(irq_get_chip_data(irq)))
- chip = &ir_hpet_msi_type;
+ irq_remap_modify_chip_defaults(chip);
irq_set_chip_and_handler_name(irq, chip, handle_edge_irq, "edge");
return 0;