Squashandroid-20111012

Change-Id: If0ae9fa8067740ab2ede33703c79ec134f204a5e

1 files changed, 756 insertions, 0 deletions

diff --git a/drivers/input/keyboard/nomadik-ske-keypad.c b/drivers/input/keyboard/nomadik-ske-keypad.c
new file mode 100644
index 00000000000..49b393b74fb
--- /dev/null
+++ b/drivers/input/keyboard/nomadik-ske-keypad.c
@@ -0,0 +1,756 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Naveen Kumar G <naveen.gaddipati@stericsson.com> for ST-Ericsson
+ * Author: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
+ *
+ * License terms:GNU General Public License (GPL) version 2
+ *
+ * Keypad controller driver for the SKE (Scroll Key Encoder) module used in
+ * the Nomadik 8815 and Ux500 platforms.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/regulator/consumer.h>
+
+#include <plat/ske.h>
+#include <plat/gpio.h>
+
+/* SKE_CR bits */
+#define SKE_KPMLT	(0x1 << 6)
+#define SKE_KPCN	(0x7 << 3)
+#define SKE_KPASEN	(0x1 << 2)
+#define SKE_KPASON	(0x1 << 7)
+
+/* SKE_IMSC bits */
+#define SKE_KPIMA	(0x1 << 2)
+
+/* SKE_ICR bits */
+#define SKE_KPICS	(0x1 << 3)
+#define SKE_KPICA	(0x1 << 2)
+
+/* SKE_RIS bits */
+#define SKE_KPRISA	(0x1 << 2)
+
+#define SKE_KEYPAD_ROW_SHIFT	3
+#define SKE_KPD_KEYMAP_SIZE	(8 * 8)
+
+/* keypad auto scan registers */
+#define SKE_ASR0	0x20
+#define SKE_ASR1	0x24
+#define SKE_ASR2	0x28
+#define SKE_ASR3	0x2C
+
+#define SKE_NUM_ASRX_REGISTERS	(4)
+#define	KEY_PRESSED_DELAY	10
+
+/**
+ * struct ske_keypad  - data structure used by keypad driver
+ * @irq:	irq no
+ * @reg_base:	ske regsiters base address
+ * @input:	pointer to input device object
+ * @board:	keypad platform device
+ * @keymap:	matrix scan code table for keycodes
+ * @clk:	clock structure pointer
+ * @enable:	flag to enable the driver event
+ * @regulator:	pointer to the regulator used for ske kyepad
+ * @gpio_input_irq: array for gpio irqs
+ * @key_pressed: hold the key state
+ * @work: delayed work variable for gpio switch
+ * @ske_rows: rows gpio array for ske
+ * @ske_cols: columns gpio array for ske
+ * @gpio_row: gpio row
+ * @gpio_col: gpio column
+ * @gpio_work: delayed work variable for release gpio key
+ */
+struct ske_keypad {
+	int irq;
+	void __iomem *reg_base;
+	struct input_dev *input;
+	const struct ske_keypad_platform_data *board;
+	unsigned short keymap[SKE_KPD_KEYMAP_SIZE];
+	struct clk *clk;
+	spinlock_t ske_keypad_lock;
+	bool enable;
+	struct regulator *regulator;
+	int gpio_input_irq[SKE_KPD_MAX_ROWS];
+	int key_pressed;
+	struct delayed_work work;
+	int ske_rows[SKE_KPD_MAX_ROWS];
+	int ske_cols[SKE_KPD_MAX_COLS];
+	int gpio_row;
+	int gpio_col;
+	struct delayed_work gpio_work;
+};
+
+static void ske_keypad_set_bits(struct ske_keypad *keypad, u16 addr,
+		u8 mask, u8 data)
+{
+	u32 ret;
+
+	spin_lock(&keypad->ske_keypad_lock);
+
+	ret = readl(keypad->reg_base + addr);
+	ret &= ~mask;
+	ret |= data;
+	writel(ret, keypad->reg_base + addr);
+
+	spin_unlock(&keypad->ske_keypad_lock);
+}
+
+/*
+ * ske_keypad_chip_init: init keypad controller configuration
+ *
+ * Enable Multi key press detection, auto scan mode
+ */
+static int __devinit ske_keypad_chip_init(struct ske_keypad *keypad)
+{
+	u32 value;
+	int timeout = keypad->board->debounce_ms;
+
+	/* check SKE_RIS to be 0 */
+	while ((readl(keypad->reg_base + SKE_RIS) != 0x00000000) && timeout--)
+		cpu_relax();
+
+	if (!timeout)
+		return -EINVAL;
+
+	/*
+	 * set debounce value
+	 * keypad dbounce is configured in DBCR[15:8]
+	 * dbounce value in steps of 32/32.768 ms
+	 */
+	spin_lock(&keypad->ske_keypad_lock);
+	value = readl(keypad->reg_base + SKE_DBCR);
+	value = value & 0xff;
+	value |= ((keypad->board->debounce_ms * 32000)/32768) << 8;
+	writel(value, keypad->reg_base + SKE_DBCR);
+	spin_unlock(&keypad->ske_keypad_lock);
+
+	/* enable multi key detection */
+	ske_keypad_set_bits(keypad, SKE_CR, 0x0, SKE_KPMLT);
+
+	/*
+	 * set up the number of columns
+	 * KPCN[5:3] defines no. of keypad columns to be auto scanned
+	 */
+	value = (keypad->board->kcol - 1) << 3;
+	ske_keypad_set_bits(keypad, SKE_CR, SKE_KPCN, value);
+
+	/* clear keypad interrupt for auto(and pending SW) scans */
+	ske_keypad_set_bits(keypad, SKE_ICR, 0x0, SKE_KPICA | SKE_KPICS);
+
+	/* un-mask keypad interrupts */
+	ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA);
+
+	/* enable automatic scan */
+	ske_keypad_set_bits(keypad, SKE_CR, 0x0, SKE_KPASEN);
+
+	return 0;
+}
+
+static void ske_mode_enable(struct ske_keypad *keypad, bool enable)
+{
+	int i;
+
+	if (!enable) {
+		writel(0, keypad->reg_base + SKE_CR);
+		if (keypad->board->exit)
+			keypad->board->exit();
+		for (i = 0; i < keypad->board->krow; i++) {
+			enable_irq(keypad->gpio_input_irq[i]);
+			enable_irq_wake(keypad->gpio_input_irq[i]);
+		}
+		clk_disable(keypad->clk);
+		regulator_disable(keypad->regulator);
+	} else {
+		regulator_enable(keypad->regulator);
+		clk_enable(keypad->clk);
+		for (i = 0; i < keypad->board->krow; i++) {
+			disable_irq_nosync(keypad->gpio_input_irq[i]);
+			disable_irq_wake(keypad->gpio_input_irq[i]);
+		}
+		if (keypad->board->init)
+			keypad->board->init();
+		ske_keypad_chip_init(keypad);
+	}
+}
+static void ske_enable(struct ske_keypad *keypad, bool enable)
+{
+	keypad->enable = enable;
+	if (keypad->enable) {
+		enable_irq(keypad->irq);
+		ske_mode_enable(keypad, true);
+	} else {
+		ske_mode_enable(keypad, false);
+		disable_irq(keypad->irq);
+	}
+}
+
+static ssize_t ske_show_attr_enable(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct ske_keypad *keypad = platform_get_drvdata(pdev);
+	return sprintf(buf, "%d\n", keypad->enable);
+}
+
+static ssize_t ske_store_attr_enable(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct ske_keypad *keypad = platform_get_drvdata(pdev);
+	unsigned long val;
+
+	if (strict_strtoul(buf, 0, &val))
+		return -EINVAL;
+
+	if ((val != 0) && (val != 1))
+		return -EINVAL;
+
+	if (keypad->enable != val) {
+		keypad->enable = val ? true : false;
+		ske_enable(keypad, keypad->enable);
+	}
+	return count;
+}
+
+static DEVICE_ATTR(enable, S_IWUSR | S_IRUGO,
+	ske_show_attr_enable, ske_store_attr_enable);
+
+static struct attribute *ske_keypad_attrs[] = {
+	&dev_attr_enable.attr,
+	NULL,
+};
+
+static struct attribute_group ske_attr_group = {
+	.attrs = ske_keypad_attrs,
+};
+
+static void ske_keypad_report(struct ske_keypad *keypad, u8 status, int col)
+{
+	int row = 0, code, pos;
+	struct input_dev *input = keypad->input;
+	u32 ske_ris;
+	int num_of_rows;
+
+	/* find out the row */
+	num_of_rows = hweight8(status);
+	do {
+		pos = __ffs(status);
+		row = pos;
+		status &= ~(1 << pos);
+
+		code = MATRIX_SCAN_CODE(row, col, SKE_KEYPAD_ROW_SHIFT);
+		ske_ris = readl(keypad->reg_base + SKE_RIS);
+		keypad->key_pressed = ske_ris & SKE_KPRISA;
+
+		input_event(input, EV_MSC, MSC_SCAN, code);
+		input_report_key(input, keypad->keymap[code],
+						keypad->key_pressed);
+		input_sync(input);
+		num_of_rows--;
+	} while (num_of_rows);
+}
+
+static void ske_keypad_read_data(struct ske_keypad *keypad)
+{
+	u8 status;
+	int col = 0;
+	int ske_asr, i;
+
+	/*
+	 * Read the auto scan registers
+	 *
+	 * Each SKE_ASRx (x=0 to x=3) contains two row values.
+	 * lower byte contains row value for column 2*x,
+	 * upper byte contains row value for column 2*x + 1
+	 */
+	for (i = 0; i < SKE_NUM_ASRX_REGISTERS; i++) {
+		ske_asr = readl(keypad->reg_base + SKE_ASR0 + (4 * i));
+		if (!ske_asr)
+			continue;
+
+		/* now that ASRx is zero, find out the coloumn x and row y */
+		status = ske_asr & 0xff;
+		if (status) {
+			col = i * 2;
+			ske_keypad_report(keypad, status, col);
+		}
+		status = (ske_asr & 0xff00) >> 8;
+		if (status) {
+			col = (i * 2) + 1;
+			ske_keypad_report(keypad, status, col);
+		}
+	}
+}
+static void ske_keypad_scan(struct ske_keypad *keypad)
+{
+	int timeout = keypad->board->debounce_ms;
+
+	/* disable auto scan interrupt; mask the interrupt generated */
+	ske_keypad_set_bits(keypad, SKE_IMSC, ~SKE_KPIMA, 0x0);
+	ske_keypad_set_bits(keypad, SKE_ICR, 0x0, SKE_KPICA);
+
+	while ((readl(keypad->reg_base + SKE_CR) & SKE_KPASON) && --timeout)
+		cpu_relax();
+
+	/* SKEx registers are stable and can be read */
+	ske_keypad_read_data(keypad);
+
+	/* wait until raw interrupt is clear */
+	while ((readl(keypad->reg_base + SKE_RIS)) && --timeout)
+		msleep(KEY_PRESSED_DELAY);
+
+	/* enable auto scan interrupts */
+	ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA);
+}
+
+static void ske_gpio_switch_work(struct work_struct *work)
+{
+	struct ske_keypad *keypad = container_of(work,
+					struct ske_keypad, work.work);
+
+	ske_mode_enable(keypad, false);
+	keypad->enable = false;
+}
+
+static void ske_gpio_release_work(struct work_struct *work)
+{
+	int code;
+	struct ske_keypad *keypad = container_of(work,
+					struct ske_keypad, gpio_work.work);
+	struct input_dev *input = keypad->input;
+
+	code = MATRIX_SCAN_CODE(keypad->gpio_row, keypad->gpio_col,
+						SKE_KEYPAD_ROW_SHIFT);
+	input_event(input, EV_MSC, MSC_SCAN, code);
+	input_report_key(input, keypad->keymap[code], 1);
+	input_sync(input);
+	input_report_key(input, keypad->keymap[code], 0);
+	input_sync(input);
+}
+
+static int ske_read_get_gpio_row(struct ske_keypad *keypad)
+{
+	int row;
+	int value = 0;
+	int ret;
+
+	/* read all rows GPIO data register values */
+	for (row = 0; row < SKE_KPD_MAX_ROWS ; row++) {
+		ret  = gpio_get_value(keypad->ske_rows[row]);
+		value += (1 << row) *  ret;
+	}
+
+	/* get the exact row */
+	for (row = 0; row < keypad->board->krow; row++) {
+		if (((1 << row) & value) == 0)
+			return row;
+	}
+
+	return -1;
+}
+
+static void ske_set_cols(struct ske_keypad *keypad, int col)
+{
+	int i ;
+	int value;
+
+	/*
+	 * Set all columns except the requested column
+	 * output pin as high
+	 */
+	for (i = 0; i < SKE_KPD_MAX_COLS; i++) {
+		if (i == col)
+			value = 0;
+		else
+			value = 1;
+		gpio_request(keypad->ske_cols[i], "ske-kp");
+		gpio_direction_output(keypad->ske_cols[i], value);
+		gpio_free(keypad->ske_cols[i]);
+	}
+}
+
+static void ske_free_cols(struct ske_keypad *keypad)
+{
+	int i ;
+
+	for (i = 0; i < SKE_KPD_MAX_COLS; i++) {
+		gpio_request(keypad->ske_cols[i], "ske-kp");
+		gpio_direction_output(keypad->ske_cols[i], 0);
+		gpio_free(keypad->ske_cols[i]);
+	}
+}
+
+static void ske_manual_scan(struct ske_keypad *keypad)
+{
+	int row;
+	int col;
+
+	for (col = 0; col < keypad->board->kcol; col++) {
+		ske_set_cols(keypad, col);
+		row = ske_read_get_gpio_row(keypad);
+		if (row >= 0) {
+			keypad->key_pressed = 1;
+			keypad->gpio_row = row;
+			keypad->gpio_col = col;
+			break;
+		}
+	}
+	ske_free_cols(keypad);
+}
+
+static irqreturn_t ske_keypad_gpio_irq(int irq, void *dev_id)
+{
+	struct ske_keypad *keypad = dev_id;
+
+	if (!gpio_get_value(IRQ_TO_GPIO(irq))) {
+		ske_manual_scan(keypad);
+		if (!keypad->enable) {
+			keypad->enable = true;
+			ske_mode_enable(keypad, true);
+		}
+		/*
+		 * Schedule the work queue to change it to
+		 * report the key pressed, if it is not detected in SKE mode.
+		 */
+		if (keypad->key_pressed)
+			schedule_delayed_work(&keypad->gpio_work,
+						KEY_PRESSED_DELAY);
+	}
+
+	return IRQ_HANDLED;
+}
+static irqreturn_t ske_keypad_irq(int irq, void *dev_id)
+{
+	struct ske_keypad *keypad = dev_id;
+
+	cancel_delayed_work_sync(&keypad->gpio_work);
+	cancel_delayed_work_sync(&keypad->work);
+	ske_keypad_scan(keypad);
+
+	/*
+	 * Schedule the work queue to change it to
+	 * GPIO mode, if there is no activity in SKE mode
+	 */
+	if (!keypad->key_pressed && keypad->enable)
+		schedule_delayed_work(&keypad->work,
+				keypad->board->switch_delay);
+
+	return IRQ_HANDLED;
+}
+
+static int __devinit ske_keypad_probe(struct platform_device *pdev)
+{
+	struct ske_keypad *keypad;
+	struct resource *res = NULL;
+	struct input_dev *input;
+	struct clk *clk;
+	void __iomem *reg_base;
+	int ret = 0;
+	int irq;
+	int i;
+	struct ske_keypad_platform_data *plat = pdev->dev.platform_data;
+
+	if (!plat) {
+		dev_err(&pdev->dev, "invalid keypad platform data\n");
+		return -EINVAL;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "failed to get keypad irq\n");
+		return -EINVAL;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "missing platform resources\n");
+		return -ENXIO;
+	}
+
+	res = request_mem_region(res->start, resource_size(res), pdev->name);
+	if (!res) {
+		dev_err(&pdev->dev, "failed to request I/O memory\n");
+		return -EBUSY;
+	}
+
+	reg_base = ioremap(res->start, resource_size(res));
+	if (!reg_base) {
+		dev_err(&pdev->dev, "failed to remap I/O memory\n");
+		ret = -ENXIO;
+		goto out_freerequest_memregions;
+	}
+
+	clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "failed to clk_get\n");
+		ret = PTR_ERR(clk);
+		goto out_freeioremap;
+	}
+
+	/* resources are sane; we begin allocation */
+	keypad = kzalloc(sizeof(struct ske_keypad), GFP_KERNEL);
+	if (!keypad) {
+		dev_err(&pdev->dev, "failed to allocate keypad memory\n");
+		goto out_freeclk;
+	}
+
+	input = input_allocate_device();
+	if (!input) {
+		dev_err(&pdev->dev, "failed to input_allocate_device\n");
+		ret = -ENOMEM;
+		goto out_freekeypad;
+	}
+	keypad->regulator = regulator_get(&pdev->dev, "v-ape");
+	if (IS_ERR(keypad->regulator)) {
+		dev_err(&pdev->dev, "regulator_get failed\n");
+		keypad->regulator = NULL;
+		goto out_regulator_get;
+	} else {
+		ret = regulator_enable(keypad->regulator);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "regulator_enable failed\n");
+			goto out_regulator_enable;
+		}
+	}
+
+	input->id.bustype = BUS_HOST;
+	input->name = "ux500-ske-keypad";
+	input->dev.parent = &pdev->dev;
+
+	input->keycode = keypad->keymap;
+	input->keycodesize = sizeof(keypad->keymap[0]);
+	input->keycodemax = ARRAY_SIZE(keypad->keymap);
+
+	input_set_capability(input, EV_MSC, MSC_SCAN);
+	input_set_drvdata(input, keypad);
+
+	__set_bit(EV_KEY, input->evbit);
+	if (!plat->no_autorepeat)
+		__set_bit(EV_REP, input->evbit);
+
+	matrix_keypad_build_keymap(plat->keymap_data, SKE_KEYPAD_ROW_SHIFT,
+					input->keycode, input->keybit);
+
+	ret = input_register_device(input);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"unable to register input device: %d\n", ret);
+		goto out_freeinput;
+	}
+
+	keypad->irq	= irq;
+	keypad->board	= plat;
+	keypad->input	= input;
+	keypad->reg_base = reg_base;
+	keypad->clk	= clk;
+	INIT_DELAYED_WORK(&keypad->work, ske_gpio_switch_work);
+	INIT_DELAYED_WORK(&keypad->gpio_work, ske_gpio_release_work);
+
+	/* allocations are sane, we begin HW initialization */
+	clk_enable(keypad->clk);
+
+	if (!keypad->board->init) {
+		dev_err(&pdev->dev, "init funtion not defined\n");
+		ret = -EINVAL;
+		goto out_unregisterinput;
+	}
+
+	if (keypad->board->init() < 0) {
+		dev_err(&pdev->dev, "keyboard init config failed\n");
+		ret = -EINVAL;
+		goto out_unregisterinput;
+	}
+
+	if (!keypad->board->exit) {
+		dev_err(&pdev->dev, "exit funtion not defined\n");
+		ret = -EINVAL;
+		goto out_unregisterinput;
+	}
+
+	if (keypad->board->exit() < 0) {
+		dev_err(&pdev->dev,  "keyboard exit config failed\n");
+		ret = -EINVAL;
+		goto out_unregisterinput;
+	}
+	for (i = 0; i < SKE_KPD_MAX_ROWS; i++) {
+		keypad->ske_rows[i] = *plat->gpio_input_pins;
+		keypad->ske_cols[i] = *plat->gpio_output_pins;
+		keypad->gpio_input_irq[i] =
+				GPIO_TO_IRQ(keypad->ske_rows[i]);
+		plat->gpio_input_pins++;
+		plat->gpio_output_pins++;
+	}
+
+	for (i = 0; i < keypad->board->krow; i++) {
+		ret =  request_threaded_irq(keypad->gpio_input_irq[i],
+				NULL, ske_keypad_gpio_irq,
+				IRQF_TRIGGER_FALLING | IRQF_NO_SUSPEND,
+				"ske-keypad-gpio", keypad);
+		if (ret) {
+			dev_err(&pdev->dev, "allocate gpio irq %d failed\n",
+						keypad->gpio_input_irq[i]);
+			goto out_unregisterinput;
+		}
+		enable_irq_wake(keypad->gpio_input_irq[i]);
+	}
+
+	ret =  request_threaded_irq(keypad->irq, NULL, ske_keypad_irq,
+				IRQF_ONESHOT, "ske-keypad", keypad);
+	if (ret) {
+		dev_err(&pdev->dev, "allocate irq %d failed\n", keypad->irq);
+		goto out_unregisterinput;
+	}
+
+	/* sysfs implementation for dynamic enable/disable the input event */
+	ret = sysfs_create_group(&pdev->dev.kobj, &ske_attr_group);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to create sysfs entries\n");
+		goto out_free_irq;
+	}
+
+	if (plat->wakeup_enable)
+		device_init_wakeup(&pdev->dev, true);
+
+	platform_set_drvdata(pdev, keypad);
+
+	clk_disable(keypad->clk);
+	regulator_disable(keypad->regulator);
+
+	return 0;
+
+out_free_irq:
+	free_irq(keypad->irq, keypad);
+out_unregisterinput:
+	input_unregister_device(input);
+	input = NULL;
+	clk_disable(keypad->clk);
+out_freeinput:
+	regulator_disable(keypad->regulator);
+out_regulator_enable:
+	regulator_put(keypad->regulator);
+out_regulator_get:
+	input_free_device(input);
+out_freekeypad:
+	kfree(keypad);
+out_freeclk:
+	clk_put(keypad->clk);
+out_freeioremap:
+	iounmap(reg_base);
+out_freerequest_memregions:
+	release_mem_region(res->start, resource_size(res));
+	return ret;
+}
+
+static int __devexit ske_keypad_remove(struct platform_device *pdev)
+{
+	struct ske_keypad *keypad = platform_get_drvdata(pdev);
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	cancel_delayed_work_sync(&keypad->gpio_work);
+	cancel_delayed_work_sync(&keypad->work);
+	free_irq(keypad->irq, keypad);
+
+	input_unregister_device(keypad->input);
+
+	sysfs_remove_group(&pdev->dev.kobj, &ske_attr_group);
+	clk_disable(keypad->clk);
+	clk_put(keypad->clk);
+
+	if (keypad->board->exit)
+		keypad->board->exit();
+
+	regulator_put(keypad->regulator);
+
+	iounmap(keypad->reg_base);
+	release_mem_region(res->start, resource_size(res));
+	kfree(keypad);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int ske_keypad_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct ske_keypad *keypad = platform_get_drvdata(pdev);
+	int irq = platform_get_irq(pdev, 0);
+
+	if (device_may_wakeup(dev))
+		enable_irq_wake(irq);
+	else {
+		cancel_delayed_work_sync(&keypad->gpio_work);
+		cancel_delayed_work_sync(&keypad->work);
+		disable_irq(irq);
+		if (keypad->enable) {
+			ske_mode_enable(keypad, false);
+			keypad->enable = false;
+		}
+	}
+
+	return 0;
+}
+
+static int ske_keypad_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct ske_keypad *keypad = platform_get_drvdata(pdev);
+	int irq = platform_get_irq(pdev, 0);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(irq);
+	else {
+		if (!keypad->enable) {
+			keypad->enable = true;
+			ske_mode_enable(keypad, true);
+		}
+		enable_irq(irq);
+	}
+
+	return 0;
+}
+
+static const struct dev_pm_ops ske_keypad_dev_pm_ops = {
+	.suspend = ske_keypad_suspend,
+	.resume = ske_keypad_resume,
+};
+#endif
+
+struct platform_driver ske_keypad_driver = {
+	.driver = {
+		.name = "nmk-ske-keypad",
+		.owner  = THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm = &ske_keypad_dev_pm_ops,
+#endif
+	},
+	.probe = ske_keypad_probe,
+	.remove = __devexit_p(ske_keypad_remove),
+};
+
+static int __init ske_keypad_init(void)
+{
+	return platform_driver_register(&ske_keypad_driver);
+}
+module_init(ske_keypad_init);
+
+static void __exit ske_keypad_exit(void)
+{
+	platform_driver_unregister(&ske_keypad_driver);
+}
+module_exit(ske_keypad_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Naveen Kumar <naveen.gaddipati@stericsson.com>");
+MODULE_DESCRIPTION("Nomadik Scroll-Key-Encoder Keypad Driver");
+MODULE_ALIAS("platform:nomadik-ske-keypad");