Merge git://git.infradead.org/mtd-2.6

* git://git.infradead.org/mtd-2.6: (82 commits)
  mtd: fix build error in m25p80.c
  mtd: Remove redundant mutex from mtd_blkdevs.c
  MTD: Fix wrong check register_blkdev return value
  Revert "mtd: cleanup Kconfig dependencies"
  mtd: cfi_cmdset_0002: make sector erase command variable
  mtd: cfi_cmdset_0002: add CFI detection for SST 38VF640x chips
  mtd: cfi_util: add support for switching SST 39VF640xB chips into QRY mode
  mtd: cfi_cmdset_0001: use defined value of P_ID_INTEL_PERFORMANCE instead of hardcoded one
  block2mtd: dubious assignment
  P4080/mtd: Fix the freescale lbc issue with 36bit mode
  P4080/eLBC: Make Freescale elbc interrupt common to elbc devices
  mtd: phram: use KBUILD_MODNAME
  mtd: OneNAND: S5PC110: Fix double call suspend & resume function
  mtd: nand: fix MTD_MODE_RAW writes
  jffs2: use kmemdup
  mtd: sm_ftl: cosmetic, use bool when possible
  mtd: r852: remove useless pci powerup/down from suspend/resume routines
  mtd: blktrans: fix a race vs kthread_stop
  mtd: blktrans: kill BKL
  mtd: allow to unload the mtdtrans module if its block devices aren't open
  ...

Fix up trivial whitespace-introduced conflict in drivers/mtd/mtdchar.c

1 files changed, 866 insertions, 0 deletions

diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c
new file mode 100644
index 00000000000..02edfba25b0
--- /dev/null
+++ b/drivers/mtd/nand/fsmc_nand.c
@@ -0,0 +1,866 @@
+/*
+ * drivers/mtd/nand/fsmc_nand.c
+ *
+ * ST Microelectronics
+ * Flexible Static Memory Controller (FSMC)
+ * Driver for NAND portions
+ *
+ * Copyright © 2010 ST Microelectronics
+ * Vipin Kumar <vipin.kumar@st.com>
+ * Ashish Priyadarshi
+ *
+ * Based on drivers/mtd/nand/nomadik_nand.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/resource.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/mtd/fsmc.h>
+#include <mtd/mtd-abi.h>
+
+static struct nand_ecclayout fsmc_ecc1_layout = {
+	.eccbytes = 24,
+	.eccpos = {2, 3, 4, 18, 19, 20, 34, 35, 36, 50, 51, 52,
+		66, 67, 68, 82, 83, 84, 98, 99, 100, 114, 115, 116},
+	.oobfree = {
+		{.offset = 8, .length = 8},
+		{.offset = 24, .length = 8},
+		{.offset = 40, .length = 8},
+		{.offset = 56, .length = 8},
+		{.offset = 72, .length = 8},
+		{.offset = 88, .length = 8},
+		{.offset = 104, .length = 8},
+		{.offset = 120, .length = 8}
+	}
+};
+
+static struct nand_ecclayout fsmc_ecc4_lp_layout = {
+	.eccbytes = 104,
+	.eccpos = {  2,   3,   4,   5,   6,   7,   8,
+		9,  10,  11,  12,  13,  14,
+		18,  19,  20,  21,  22,  23,  24,
+		25,  26,  27,  28,  29,  30,
+		34,  35,  36,  37,  38,  39,  40,
+		41,  42,  43,  44,  45,  46,
+		50,  51,  52,  53,  54,  55,  56,
+		57,  58,  59,  60,  61,  62,
+		66,  67,  68,  69,  70,  71,  72,
+		73,  74,  75,  76,  77,  78,
+		82,  83,  84,  85,  86,  87,  88,
+		89,  90,  91,  92,  93,  94,
+		98,  99, 100, 101, 102, 103, 104,
+		105, 106, 107, 108, 109, 110,
+		114, 115, 116, 117, 118, 119, 120,
+		121, 122, 123, 124, 125, 126
+	},
+	.oobfree = {
+		{.offset = 15, .length = 3},
+		{.offset = 31, .length = 3},
+		{.offset = 47, .length = 3},
+		{.offset = 63, .length = 3},
+		{.offset = 79, .length = 3},
+		{.offset = 95, .length = 3},
+		{.offset = 111, .length = 3},
+		{.offset = 127, .length = 1}
+	}
+};
+
+/*
+ * ECC placement definitions in oobfree type format.
+ * There are 13 bytes of ecc for every 512 byte block and it has to be read
+ * consecutively and immediately after the 512 byte data block for hardware to
+ * generate the error bit offsets in 512 byte data.
+ * Managing the ecc bytes in the following way makes it easier for software to
+ * read ecc bytes consecutive to data bytes. This way is similar to
+ * oobfree structure maintained already in generic nand driver
+ */
+static struct fsmc_eccplace fsmc_ecc4_lp_place = {
+	.eccplace = {
+		{.offset = 2, .length = 13},
+		{.offset = 18, .length = 13},
+		{.offset = 34, .length = 13},
+		{.offset = 50, .length = 13},
+		{.offset = 66, .length = 13},
+		{.offset = 82, .length = 13},
+		{.offset = 98, .length = 13},
+		{.offset = 114, .length = 13}
+	}
+};
+
+static struct nand_ecclayout fsmc_ecc4_sp_layout = {
+	.eccbytes = 13,
+	.eccpos = { 0,  1,  2,  3,  6,  7, 8,
+		9, 10, 11, 12, 13, 14
+	},
+	.oobfree = {
+		{.offset = 15, .length = 1},
+	}
+};
+
+static struct fsmc_eccplace fsmc_ecc4_sp_place = {
+	.eccplace = {
+		{.offset = 0, .length = 4},
+		{.offset = 6, .length = 9}
+	}
+};
+
+/*
+ * Default partition tables to be used if the partition information not
+ * provided through platform data
+ */
+#define PARTITION(n, off, sz)	{.name = n, .offset = off, .size = sz}
+
+/*
+ * Default partition layout for small page(= 512 bytes) devices
+ * Size for "Root file system" is updated in driver based on actual device size
+ */
+static struct mtd_partition partition_info_16KB_blk[] = {
+	PARTITION("X-loader", 0, 4 * 0x4000),
+	PARTITION("U-Boot", 0x10000, 20 * 0x4000),
+	PARTITION("Kernel", 0x60000, 256 * 0x4000),
+	PARTITION("Root File System", 0x460000, 0),
+};
+
+/*
+ * Default partition layout for large page(> 512 bytes) devices
+ * Size for "Root file system" is updated in driver based on actual device size
+ */
+static struct mtd_partition partition_info_128KB_blk[] = {
+	PARTITION("X-loader", 0, 4 * 0x20000),
+	PARTITION("U-Boot", 0x80000, 12 * 0x20000),
+	PARTITION("Kernel", 0x200000, 48 * 0x20000),
+	PARTITION("Root File System", 0x800000, 0),
+};
+
+#ifdef CONFIG_MTD_CMDLINE_PARTS
+const char *part_probes[] = { "cmdlinepart", NULL };
+#endif
+
+/**
+ * struct fsmc_nand_data - atructure for FSMC NAND device state
+ *
+ * @mtd:		MTD info for a NAND flash.
+ * @nand:		Chip related info for a NAND flash.
+ * @partitions:		Partition info for a NAND Flash.
+ * @nr_partitions:	Total number of partition of a NAND flash.
+ *
+ * @ecc_place:		ECC placing locations in oobfree type format.
+ * @bank:		Bank number for probed device.
+ * @clk:		Clock structure for FSMC.
+ *
+ * @data_va:		NAND port for Data.
+ * @cmd_va:		NAND port for Command.
+ * @addr_va:		NAND port for Address.
+ * @regs_va:		FSMC regs base address.
+ */
+struct fsmc_nand_data {
+	struct mtd_info		mtd;
+	struct nand_chip	nand;
+	struct mtd_partition	*partitions;
+	unsigned int		nr_partitions;
+
+	struct fsmc_eccplace	*ecc_place;
+	unsigned int		bank;
+	struct clk		*clk;
+
+	struct resource		*resregs;
+	struct resource		*rescmd;
+	struct resource		*resaddr;
+	struct resource		*resdata;
+
+	void __iomem		*data_va;
+	void __iomem		*cmd_va;
+	void __iomem		*addr_va;
+	void __iomem		*regs_va;
+
+	void			(*select_chip)(uint32_t bank, uint32_t busw);
+};
+
+/* Assert CS signal based on chipnr */
+static void fsmc_select_chip(struct mtd_info *mtd, int chipnr)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct fsmc_nand_data *host;
+
+	host = container_of(mtd, struct fsmc_nand_data, mtd);
+
+	switch (chipnr) {
+	case -1:
+		chip->cmd_ctrl(mtd, NAND_CMD_NONE, 0 | NAND_CTRL_CHANGE);
+		break;
+	case 0:
+	case 1:
+	case 2:
+	case 3:
+		if (host->select_chip)
+			host->select_chip(chipnr,
+					chip->options & NAND_BUSWIDTH_16);
+		break;
+
+	default:
+		BUG();
+	}
+}
+
+/*
+ * fsmc_cmd_ctrl - For facilitaing Hardware access
+ * This routine allows hardware specific access to control-lines(ALE,CLE)
+ */
+static void fsmc_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+	struct nand_chip *this = mtd->priv;
+	struct fsmc_nand_data *host = container_of(mtd,
+					struct fsmc_nand_data, mtd);
+	struct fsmc_regs *regs = host->regs_va;
+	unsigned int bank = host->bank;
+
+	if (ctrl & NAND_CTRL_CHANGE) {
+		if (ctrl & NAND_CLE) {
+			this->IO_ADDR_R = (void __iomem *)host->cmd_va;
+			this->IO_ADDR_W = (void __iomem *)host->cmd_va;
+		} else if (ctrl & NAND_ALE) {
+			this->IO_ADDR_R = (void __iomem *)host->addr_va;
+			this->IO_ADDR_W = (void __iomem *)host->addr_va;
+		} else {
+			this->IO_ADDR_R = (void __iomem *)host->data_va;
+			this->IO_ADDR_W = (void __iomem *)host->data_va;
+		}
+
+		if (ctrl & NAND_NCE) {
+			writel(readl(&regs->bank_regs[bank].pc) | FSMC_ENABLE,
+					&regs->bank_regs[bank].pc);
+		} else {
+			writel(readl(&regs->bank_regs[bank].pc) & ~FSMC_ENABLE,
+				       &regs->bank_regs[bank].pc);
+		}
+	}
+
+	mb();
+
+	if (cmd != NAND_CMD_NONE)
+		writeb(cmd, this->IO_ADDR_W);
+}
+
+/*
+ * fsmc_nand_setup - FSMC (Flexible Static Memory Controller) init routine
+ *
+ * This routine initializes timing parameters related to NAND memory access in
+ * FSMC registers
+ */
+static void __init fsmc_nand_setup(struct fsmc_regs *regs, uint32_t bank,
+				   uint32_t busw)
+{
+	uint32_t value = FSMC_DEVTYPE_NAND | FSMC_ENABLE | FSMC_WAITON;
+
+	if (busw)
+		writel(value | FSMC_DEVWID_16, &regs->bank_regs[bank].pc);
+	else
+		writel(value | FSMC_DEVWID_8, &regs->bank_regs[bank].pc);
+
+	writel(readl(&regs->bank_regs[bank].pc) | FSMC_TCLR_1 | FSMC_TAR_1,
+	       &regs->bank_regs[bank].pc);
+	writel(FSMC_THIZ_1 | FSMC_THOLD_4 | FSMC_TWAIT_6 | FSMC_TSET_0,
+	       &regs->bank_regs[bank].comm);
+	writel(FSMC_THIZ_1 | FSMC_THOLD_4 | FSMC_TWAIT_6 | FSMC_TSET_0,
+	       &regs->bank_regs[bank].attrib);
+}
+
+/*
+ * fsmc_enable_hwecc - Enables Hardware ECC through FSMC registers
+ */
+static void fsmc_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+	struct fsmc_nand_data *host = container_of(mtd,
+					struct fsmc_nand_data, mtd);
+	struct fsmc_regs *regs = host->regs_va;
+	uint32_t bank = host->bank;
+
+	writel(readl(&regs->bank_regs[bank].pc) & ~FSMC_ECCPLEN_256,
+		       &regs->bank_regs[bank].pc);
+	writel(readl(&regs->bank_regs[bank].pc) & ~FSMC_ECCEN,
+			&regs->bank_regs[bank].pc);
+	writel(readl(&regs->bank_regs[bank].pc) | FSMC_ECCEN,
+			&regs->bank_regs[bank].pc);
+}
+
+/*
+ * fsmc_read_hwecc_ecc4 - Hardware ECC calculator for ecc4 option supported by
+ * FSMC. ECC is 13 bytes for 512 bytes of data (supports error correction upto
+ * max of 8-bits)
+ */
+static int fsmc_read_hwecc_ecc4(struct mtd_info *mtd, const uint8_t *data,
+				uint8_t *ecc)
+{
+	struct fsmc_nand_data *host = container_of(mtd,
+					struct fsmc_nand_data, mtd);
+	struct fsmc_regs *regs = host->regs_va;
+	uint32_t bank = host->bank;
+	uint32_t ecc_tmp;
+	unsigned long deadline = jiffies + FSMC_BUSY_WAIT_TIMEOUT;
+
+	do {
+		if (readl(&regs->bank_regs[bank].sts) & FSMC_CODE_RDY)
+			break;
+		else
+			cond_resched();
+	} while (!time_after_eq(jiffies, deadline));
+
+	ecc_tmp = readl(&regs->bank_regs[bank].ecc1);
+	ecc[0] = (uint8_t) (ecc_tmp >> 0);
+	ecc[1] = (uint8_t) (ecc_tmp >> 8);
+	ecc[2] = (uint8_t) (ecc_tmp >> 16);
+	ecc[3] = (uint8_t) (ecc_tmp >> 24);
+
+	ecc_tmp = readl(&regs->bank_regs[bank].ecc2);
+	ecc[4] = (uint8_t) (ecc_tmp >> 0);
+	ecc[5] = (uint8_t) (ecc_tmp >> 8);
+	ecc[6] = (uint8_t) (ecc_tmp >> 16);
+	ecc[7] = (uint8_t) (ecc_tmp >> 24);
+
+	ecc_tmp = readl(&regs->bank_regs[bank].ecc3);
+	ecc[8] = (uint8_t) (ecc_tmp >> 0);
+	ecc[9] = (uint8_t) (ecc_tmp >> 8);
+	ecc[10] = (uint8_t) (ecc_tmp >> 16);
+	ecc[11] = (uint8_t) (ecc_tmp >> 24);
+
+	ecc_tmp = readl(&regs->bank_regs[bank].sts);
+	ecc[12] = (uint8_t) (ecc_tmp >> 16);
+
+	return 0;
+}
+
+/*
+ * fsmc_read_hwecc_ecc1 - Hardware ECC calculator for ecc1 option supported by
+ * FSMC. ECC is 3 bytes for 512 bytes of data (supports error correction upto
+ * max of 1-bit)
+ */
+static int fsmc_read_hwecc_ecc1(struct mtd_info *mtd, const uint8_t *data,
+				uint8_t *ecc)
+{
+	struct fsmc_nand_data *host = container_of(mtd,
+					struct fsmc_nand_data, mtd);
+	struct fsmc_regs *regs = host->regs_va;
+	uint32_t bank = host->bank;
+	uint32_t ecc_tmp;
+
+	ecc_tmp = readl(&regs->bank_regs[bank].ecc1);
+	ecc[0] = (uint8_t) (ecc_tmp >> 0);
+	ecc[1] = (uint8_t) (ecc_tmp >> 8);
+	ecc[2] = (uint8_t) (ecc_tmp >> 16);
+
+	return 0;
+}
+
+/*
+ * fsmc_read_page_hwecc
+ * @mtd:	mtd info structure
+ * @chip:	nand chip info structure
+ * @buf:	buffer to store read data
+ * @page:	page number to read
+ *
+ * This routine is needed for fsmc verison 8 as reading from NAND chip has to be
+ * performed in a strict sequence as follows:
+ * data(512 byte) -> ecc(13 byte)
+ * After this read, fsmc hardware generates and reports error data bits(upto a
+ * max of 8 bits)
+ */
+static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
+				 uint8_t *buf, int page)
+{
+	struct fsmc_nand_data *host = container_of(mtd,
+					struct fsmc_nand_data, mtd);
+	struct fsmc_eccplace *ecc_place = host->ecc_place;
+	int i, j, s, stat, eccsize = chip->ecc.size;
+	int eccbytes = chip->ecc.bytes;
+	int eccsteps = chip->ecc.steps;
+	uint8_t *p = buf;
+	uint8_t *ecc_calc = chip->buffers->ecccalc;
+	uint8_t *ecc_code = chip->buffers->ecccode;
+	int off, len, group = 0;
+	/*
+	 * ecc_oob is intentionally taken as uint16_t. In 16bit devices, we
+	 * end up reading 14 bytes (7 words) from oob. The local array is
+	 * to maintain word alignment
+	 */
+	uint16_t ecc_oob[7];
+	uint8_t *oob = (uint8_t *)&ecc_oob[0];
+
+	for (i = 0, s = 0; s < eccsteps; s++, i += eccbytes, p += eccsize) {
+
+		chip->cmdfunc(mtd, NAND_CMD_READ0, s * eccsize, page);
+		chip->ecc.hwctl(mtd, NAND_ECC_READ);
+		chip->read_buf(mtd, p, eccsize);
+
+		for (j = 0; j < eccbytes;) {
+			off = ecc_place->eccplace[group].offset;
+			len = ecc_place->eccplace[group].length;
+			group++;
+
+			/*
+			* length is intentionally kept a higher multiple of 2
+			* to read at least 13 bytes even in case of 16 bit NAND
+			* devices
+			*/
+			len = roundup(len, 2);
+			chip->cmdfunc(mtd, NAND_CMD_READOOB, off, page);
+			chip->read_buf(mtd, oob + j, len);
+			j += len;
+		}
+
+		memcpy(&ecc_code[i], oob, 13);
+		chip->ecc.calculate(mtd, p, &ecc_calc[i]);
+
+		stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
+		if (stat < 0)
+			mtd->ecc_stats.failed++;
+		else
+			mtd->ecc_stats.corrected += stat;
+	}
+
+	return 0;
+}
+
+/*
+ * fsmc_correct_data
+ * @mtd:	mtd info structure
+ * @dat:	buffer of read data
+ * @read_ecc:	ecc read from device spare area
+ * @calc_ecc:	ecc calculated from read data
+ *
+ * calc_ecc is a 104 bit information containing maximum of 8 error
+ * offset informations of 13 bits each in 512 bytes of read data.
+ */
+static int fsmc_correct_data(struct mtd_info *mtd, uint8_t *dat,
+			     uint8_t *read_ecc, uint8_t *calc_ecc)
+{
+	struct fsmc_nand_data *host = container_of(mtd,
+					struct fsmc_nand_data, mtd);
+	struct fsmc_regs *regs = host->regs_va;
+	unsigned int bank = host->bank;
+	uint16_t err_idx[8];
+	uint64_t ecc_data[2];
+	uint32_t num_err, i;
+
+	/* The calculated ecc is actually the correction index in data */
+	memcpy(ecc_data, calc_ecc, 13);
+
+	/*
+	 * ------------------- calc_ecc[] bit wise -----------|--13 bits--|
+	 * |---idx[7]--|--.....-----|---idx[2]--||---idx[1]--||---idx[0]--|
+	 *
+	 * calc_ecc is a 104 bit information containing maximum of 8 error
+	 * offset informations of 13 bits each. calc_ecc is copied into a
+	 * uint64_t array and error offset indexes are populated in err_idx
+	 * array
+	 */
+	for (i = 0; i < 8; i++) {
+		if (i == 4) {
+			err_idx[4] = ((ecc_data[1] & 0x1) << 12) | ecc_data[0];
+			ecc_data[1] >>= 1;
+			continue;
+		}
+		err_idx[i] = (ecc_data[i/4] & 0x1FFF);
+		ecc_data[i/4] >>= 13;
+	}
+
+	num_err = (readl(&regs->bank_regs[bank].sts) >> 10) & 0xF;
+
+	if (num_err == 0xF)
+		return -EBADMSG;
+
+	i = 0;
+	while (num_err--) {
+		change_bit(0, (unsigned long *)&err_idx[i]);
+		change_bit(1, (unsigned long *)&err_idx[i]);
+
+		if (err_idx[i] <= 512 * 8) {
+			change_bit(err_idx[i], (unsigned long *)dat);
+			i++;
+		}
+	}
+	return i;
+}
+
+/*
+ * fsmc_nand_probe - Probe function
+ * @pdev:       platform device structure
+ */
+static int __init fsmc_nand_probe(struct platform_device *pdev)
+{
+	struct fsmc_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	struct fsmc_nand_data *host;
+	struct mtd_info *mtd;
+	struct nand_chip *nand;
+	struct fsmc_regs *regs;
+	struct resource *res;
+	int nr_parts, ret = 0;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "platform data is NULL\n");
+		return -EINVAL;
+	}
+
+	/* Allocate memory for the device structure (and zero it) */
+	host = kzalloc(sizeof(*host), GFP_KERNEL);
+	if (!host) {
+		dev_err(&pdev->dev, "failed to allocate device structure\n");
+		return -ENOMEM;
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_data");
+	if (!res) {
+		ret = -EIO;
+		goto err_probe1;
+	}
+
+	host->resdata = request_mem_region(res->start, resource_size(res),
+			pdev->name);
+	if (!host->resdata) {
+		ret = -EIO;
+		goto err_probe1;
+	}
+
+	host->data_va = ioremap(res->start, resource_size(res));
+	if (!host->data_va) {
+		ret = -EIO;
+		goto err_probe1;
+	}
+
+	host->resaddr = request_mem_region(res->start + PLAT_NAND_ALE,
+			resource_size(res), pdev->name);
+	if (!host->resaddr) {
+		ret = -EIO;
+		goto err_probe1;
+	}
+
+	host->addr_va = ioremap(res->start + PLAT_NAND_ALE, resource_size(res));
+	if (!host->addr_va) {
+		ret = -EIO;
+		goto err_probe1;
+	}
+
+	host->rescmd = request_mem_region(res->start + PLAT_NAND_CLE,
+			resource_size(res), pdev->name);
+	if (!host->rescmd) {
+		ret = -EIO;
+		goto err_probe1;
+	}
+
+	host->cmd_va = ioremap(res->start + PLAT_NAND_CLE, resource_size(res));
+	if (!host->cmd_va) {
+		ret = -EIO;
+		goto err_probe1;
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fsmc_regs");
+	if (!res) {
+		ret = -EIO;
+		goto err_probe1;
+	}
+
+	host->resregs = request_mem_region(res->start, resource_size(res),
+			pdev->name);
+	if (!host->resregs) {
+		ret = -EIO;
+		goto err_probe1;
+	}
+
+	host->regs_va = ioremap(res->start, resource_size(res));
+	if (!host->regs_va) {
+		ret = -EIO;
+		goto err_probe1;
+	}
+
+	host->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(host->clk)) {
+		dev_err(&pdev->dev, "failed to fetch block clock\n");
+		ret = PTR_ERR(host->clk);
+		host->clk = NULL;
+		goto err_probe1;
+	}
+
+	ret = clk_enable(host->clk);
+	if (ret)
+		goto err_probe1;
+
+	host->bank = pdata->bank;
+	host->select_chip = pdata->select_bank;
+	regs = host->regs_va;
+
+	/* Link all private pointers */
+	mtd = &host->mtd;
+	nand = &host->nand;
+	mtd->priv = nand;
+	nand->priv = host;
+
+	host->mtd.owner = THIS_MODULE;
+	nand->IO_ADDR_R = host->data_va;
+	nand->IO_ADDR_W = host->data_va;
+	nand->cmd_ctrl = fsmc_cmd_ctrl;
+	nand->chip_delay = 30;
+
+	nand->ecc.mode = NAND_ECC_HW;
+	nand->ecc.hwctl = fsmc_enable_hwecc;
+	nand->ecc.size = 512;
+	nand->options = pdata->options;
+	nand->select_chip = fsmc_select_chip;
+
+	if (pdata->width == FSMC_NAND_BW16)
+		nand->options |= NAND_BUSWIDTH_16;
+
+	fsmc_nand_setup(regs, host->bank, nand->options & NAND_BUSWIDTH_16);
+
+	if (get_fsmc_version(host->regs_va) == FSMC_VER8) {
+		nand->ecc.read_page = fsmc_read_page_hwecc;
+		nand->ecc.calculate = fsmc_read_hwecc_ecc4;
+		nand->ecc.correct = fsmc_correct_data;
+		nand->ecc.bytes = 13;
+	} else {
+		nand->ecc.calculate = fsmc_read_hwecc_ecc1;
+		nand->ecc.correct = nand_correct_data;
+		nand->ecc.bytes = 3;
+	}
+
+	/*
+	 * Scan to find existance of the device
+	 */
+	if (nand_scan_ident(&host->mtd, 1, NULL)) {
+		ret = -ENXIO;
+		dev_err(&pdev->dev, "No NAND Device found!\n");
+		goto err_probe;
+	}
+
+	if (get_fsmc_version(host->regs_va) == FSMC_VER8) {
+		if (host->mtd.writesize == 512) {
+			nand->ecc.layout = &fsmc_ecc4_sp_layout;
+			host->ecc_place = &fsmc_ecc4_sp_place;
+		} else {
+			nand->ecc.layout = &fsmc_ecc4_lp_layout;
+			host->ecc_place = &fsmc_ecc4_lp_place;
+		}
+	} else {
+		nand->ecc.layout = &fsmc_ecc1_layout;
+	}
+
+	/* Second stage of scan to fill MTD data-structures */
+	if (nand_scan_tail(&host->mtd)) {
+		ret = -ENXIO;
+		goto err_probe;
+	}
+
+	/*
+	 * The partition information can is accessed by (in the same precedence)
+	 *
+	 * command line through Bootloader,
+	 * platform data,
+	 * default partition information present in driver.
+	 */
+#ifdef CONFIG_MTD_PARTITIONS
+#ifdef CONFIG_MTD_CMDLINE_PARTS
+	/*
+	 * Check if partition info passed via command line
+	 */
+	host->mtd.name = "nand";
+	nr_parts = parse_mtd_partitions(&host->mtd, part_probes,
+			&host->partitions, 0);
+	if (nr_parts > 0) {
+		host->nr_partitions = nr_parts;
+	} else {
+#endif
+		/*
+		 * Check if partition info passed via command line
+		 */
+		if (pdata->partitions) {
+			host->partitions = pdata->partitions;
+			host->nr_partitions = pdata->nr_partitions;
+		} else {
+			struct mtd_partition *partition;
+			int i;
+
+			/* Select the default partitions info */
+			switch (host->mtd.size) {
+			case 0x01000000:
+			case 0x02000000:
+			case 0x04000000:
+				host->partitions = partition_info_16KB_blk;
+				host->nr_partitions =
+					sizeof(partition_info_16KB_blk) /
+					sizeof(struct mtd_partition);
+				break;
+			case 0x08000000:
+			case 0x10000000:
+			case 0x20000000:
+			case 0x40000000:
+				host->partitions = partition_info_128KB_blk;
+				host->nr_partitions =
+					sizeof(partition_info_128KB_blk) /
+					sizeof(struct mtd_partition);
+				break;
+			default:
+				ret = -ENXIO;
+				pr_err("Unsupported NAND size\n");
+				goto err_probe;
+			}
+
+			partition = host->partitions;
+			for (i = 0; i < host->nr_partitions; i++, partition++) {
+				if (partition->size == 0) {
+					partition->size = host->mtd.size -
+						partition->offset;
+					break;
+				}
+			}
+		}
+#ifdef CONFIG_MTD_CMDLINE_PARTS
+	}
+#endif
+
+	if (host->partitions) {
+		ret = add_mtd_partitions(&host->mtd, host->partitions,
+				host->nr_partitions);
+		if (ret)
+			goto err_probe;
+	}
+#else
+	dev_info(&pdev->dev, "Registering %s as whole device\n", mtd->name);
+	if (!add_mtd_device(mtd)) {
+		ret = -ENXIO;
+		goto err_probe;
+	}
+#endif
+
+	platform_set_drvdata(pdev, host);
+	dev_info(&pdev->dev, "FSMC NAND driver registration successful\n");
+	return 0;
+
+err_probe:
+	clk_disable(host->clk);
+err_probe1:
+	if (host->clk)
+		clk_put(host->clk);
+	if (host->regs_va)
+		iounmap(host->regs_va);
+	if (host->resregs)
+		release_mem_region(host->resregs->start,
+				resource_size(host->resregs));
+	if (host->cmd_va)
+		iounmap(host->cmd_va);
+	if (host->rescmd)
+		release_mem_region(host->rescmd->start,
+				resource_size(host->rescmd));
+	if (host->addr_va)
+		iounmap(host->addr_va);
+	if (host->resaddr)
+		release_mem_region(host->resaddr->start,
+				resource_size(host->resaddr));
+	if (host->data_va)
+		iounmap(host->data_va);
+	if (host->resdata)
+		release_mem_region(host->resdata->start,
+				resource_size(host->resdata));
+
+	kfree(host);
+	return ret;
+}
+
+/*
+ * Clean up routine
+ */
+static int fsmc_nand_remove(struct platform_device *pdev)
+{
+	struct fsmc_nand_data *host = platform_get_drvdata(pdev);
+
+	platform_set_drvdata(pdev, NULL);
+
+	if (host) {
+#ifdef CONFIG_MTD_PARTITIONS
+		del_mtd_partitions(&host->mtd);
+#else
+		del_mtd_device(&host->mtd);
+#endif
+		clk_disable(host->clk);
+		clk_put(host->clk);
+
+		iounmap(host->regs_va);
+		release_mem_region(host->resregs->start,
+				resource_size(host->resregs));
+		iounmap(host->cmd_va);
+		release_mem_region(host->rescmd->start,
+				resource_size(host->rescmd));
+		iounmap(host->addr_va);
+		release_mem_region(host->resaddr->start,
+				resource_size(host->resaddr));
+		iounmap(host->data_va);
+		release_mem_region(host->resdata->start,
+				resource_size(host->resdata));
+
+		kfree(host);
+	}
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int fsmc_nand_suspend(struct device *dev)
+{
+	struct fsmc_nand_data *host = dev_get_drvdata(dev);
+	if (host)
+		clk_disable(host->clk);
+	return 0;
+}
+
+static int fsmc_nand_resume(struct device *dev)
+{
+	struct fsmc_nand_data *host = dev_get_drvdata(dev);
+	if (host)
+		clk_enable(host->clk);
+	return 0;
+}
+
+static const struct dev_pm_ops fsmc_nand_pm_ops = {
+	.suspend = fsmc_nand_suspend,
+	.resume = fsmc_nand_resume,
+};
+#endif
+
+static struct platform_driver fsmc_nand_driver = {
+	.remove = fsmc_nand_remove,
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "fsmc-nand",
+#ifdef CONFIG_PM
+		.pm = &fsmc_nand_pm_ops,
+#endif
+	},
+};
+
+static int __init fsmc_nand_init(void)
+{
+	return platform_driver_probe(&fsmc_nand_driver,
+				     fsmc_nand_probe);
+}
+module_init(fsmc_nand_init);
+
+static void __exit fsmc_nand_exit(void)
+{
+	platform_driver_unregister(&fsmc_nand_driver);
+}
+module_exit(fsmc_nand_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Vipin Kumar <vipin.kumar@st.com>, Ashish Priyadarshi");
+MODULE_DESCRIPTION("NAND driver for SPEAr Platforms");