Merge branch 'for-linus' of git://gitorious.org/linux-omap-dss2/linux

* 'for-linus' of git://gitorious.org/linux-omap-dss2/linux: (64 commits)
  OMAP: DSS2: OMAPFB: add support for FBIO_WAITFORVSYNC
  OMAP: DSS2: Replace strncmp() with sysfs_streq() in overlay_manager_store()
  OMAP: DSS2: Fix error path in omap_dsi_update()
  OMAP: DSS2: TDO35S: fix video signaling
  OMAP: DSS2: OMAPFB: Fix invalid bpp for PAL and NTSC modes
  OMAP: DSS2: OMAPFB: Fix probe error path
  OMAP3EVM: Replace vdvi regulator supply with vdds_dsi
  OMAP: DSS2: Remove extra return statement
  OMAP: DSS2: adjust YUV overlay width to be even
  OMAP: DSS2: OMAPFB: Fix sysfs mirror input check
  OMAP: DSS2: OMAPFB: Remove redundant color register range check
  OMAP: DSS2: OMAPFB: Remove redundant rotate range check
  OMAP: DSS2: OMAPFB: Check fb2display() return value
  OMAP: DSS2: Taal: Optimize enable_te, rotate, mirror when value unchanged
  OMAP: DSS2: DSI: detect unsupported update requests
  OMAP: DSS2: DSI: increase FIFO low threshold
  OMAP: DSS2: DSI: Add error IRQ mask for DSI complexIO
  OMAP: DSS2: DSI: Remove BTA after set_max_rx_packet_size
  OMAP: DSS2: change manual update scaling setup
  OMAP: DSS2: DSI: use BTA to end the frame transfer
  ...

14 files changed, 1223 insertions, 576 deletions

diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
index aaf5d308a04..e1c765d1141 100644
--- a/drivers/video/omap2/displays/panel-taal.c
+++ b/drivers/video/omap2/displays/panel-taal.c
@@ -28,12 +28,13 @@
 #include <linux/fb.h>
 #include <linux/interrupt.h>
 #include <linux/gpio.h>
-#include <linux/completion.h>
 #include <linux/workqueue.h>
 #include <linux/slab.h>
+#include <linux/regulator/consumer.h>
 #include <linux/mutex.h>
 
 #include <plat/display.h>
+#include <plat/nokia-dsi-panel.h>
 
 /* DSI Virtual channel. Hardcoded for now. */
 #define TCH 0
@@ -62,11 +63,136 @@
 #define DCS_GET_ID2		0xdb
 #define DCS_GET_ID3		0xdc
 
-/* #define TAAL_USE_ESD_CHECK */
 #define TAAL_ESD_CHECK_PERIOD	msecs_to_jiffies(5000)
 
+static irqreturn_t taal_te_isr(int irq, void *data);
+static void taal_te_timeout_work_callback(struct work_struct *work);
 static int _taal_enable_te(struct omap_dss_device *dssdev, bool enable);
 
+struct panel_regulator {
+	struct regulator *regulator;
+	const char *name;
+	int min_uV;
+	int max_uV;
+};
+
+static void free_regulators(struct panel_regulator *regulators, int n)
+{
+	int i;
+
+	for (i = 0; i < n; i++) {
+		/* disable/put in reverse order */
+		regulator_disable(regulators[n - i - 1].regulator);
+		regulator_put(regulators[n - i - 1].regulator);
+	}
+}
+
+static int init_regulators(struct omap_dss_device *dssdev,
+			struct panel_regulator *regulators, int n)
+{
+	int r, i, v;
+
+	for (i = 0; i < n; i++) {
+		struct regulator *reg;
+
+		reg = regulator_get(&dssdev->dev, regulators[i].name);
+		if (IS_ERR(reg)) {
+			dev_err(&dssdev->dev, "failed to get regulator %s\n",
+				regulators[i].name);
+			r = PTR_ERR(reg);
+			goto err;
+		}
+
+		/* FIXME: better handling of fixed vs. variable regulators */
+		v = regulator_get_voltage(reg);
+		if (v < regulators[i].min_uV || v > regulators[i].max_uV) {
+			r = regulator_set_voltage(reg, regulators[i].min_uV,
+						regulators[i].max_uV);
+			if (r) {
+				dev_err(&dssdev->dev,
+					"failed to set regulator %s voltage\n",
+					regulators[i].name);
+				regulator_put(reg);
+				goto err;
+			}
+		}
+
+		r = regulator_enable(reg);
+		if (r) {
+			dev_err(&dssdev->dev, "failed to enable regulator %s\n",
+				regulators[i].name);
+			regulator_put(reg);
+			goto err;
+		}
+
+		regulators[i].regulator = reg;
+	}
+
+	return 0;
+
+err:
+	free_regulators(regulators, i);
+
+	return r;
+}
+
+/**
+ * struct panel_config - panel configuration
+ * @name: panel name
+ * @type: panel type
+ * @timings: panel resolution
+ * @sleep: various panel specific delays, passed to msleep() if non-zero
+ * @reset_sequence: reset sequence timings, passed to udelay() if non-zero
+ * @regulators: array of panel regulators
+ * @num_regulators: number of regulators in the array
+ */
+struct panel_config {
+	const char *name;
+	int type;
+
+	struct omap_video_timings timings;
+
+	struct {
+		unsigned int sleep_in;
+		unsigned int sleep_out;
+		unsigned int hw_reset;
+		unsigned int enable_te;
+	} sleep;
+
+	struct {
+		unsigned int high;
+		unsigned int low;
+	} reset_sequence;
+
+	struct panel_regulator *regulators;
+	int num_regulators;
+};
+
+enum {
+	PANEL_TAAL,
+};
+
+static struct panel_config panel_configs[] = {
+	{
+		.name		= "taal",
+		.type		= PANEL_TAAL,
+		.timings	= {
+			.x_res		= 864,
+			.y_res		= 480,
+		},
+		.sleep		= {
+			.sleep_in	= 5,
+			.sleep_out	= 5,
+			.hw_reset	= 5,
+			.enable_te	= 100, /* possible panel bug */
+		},
+		.reset_sequence	= {
+			.high		= 10,
+			.low		= 10,
+		},
+	},
+};
+
 struct taal_data {
 	struct mutex lock;
 
@@ -84,8 +210,15 @@ struct taal_data {
 	bool mirror;
 
 	bool te_enabled;
-	bool use_ext_te;
-	struct completion te_completion;
+
+	atomic_t do_update;
+	struct {
+		u16 x;
+		u16 y;
+		u16 w;
+		u16 h;
+	} update_region;
+	struct delayed_work te_timeout_work;
 
 	bool use_dsi_bl;
 
@@ -96,8 +229,16 @@ struct taal_data {
 
 	struct workqueue_struct *esd_wq;
 	struct delayed_work esd_work;
+
+	struct panel_config *panel_config;
 };
 
+static inline struct nokia_dsi_panel_data
+*get_panel_data(const struct omap_dss_device *dssdev)
+{
+	return (struct nokia_dsi_panel_data *) dssdev->data;
+}
+
 static void taal_esd_work(struct work_struct *work);
 
 static void hw_guard_start(struct taal_data *td, int guard_msec)
@@ -159,7 +300,8 @@ static int taal_sleep_in(struct taal_data *td)
 
 	hw_guard_start(td, 120);
 
-	msleep(5);
+	if (td->panel_config->sleep.sleep_in)
+		msleep(td->panel_config->sleep.sleep_in);
 
 	return 0;
 }
@@ -176,7 +318,8 @@ static int taal_sleep_out(struct taal_data *td)
 
 	hw_guard_start(td, 120);
 
-	msleep(5);
+	if (td->panel_config->sleep.sleep_out)
+		msleep(td->panel_config->sleep.sleep_out);
 
 	return 0;
 }
@@ -279,6 +422,7 @@ static int taal_bl_update_status(struct backlight_device *dev)
 {
 	struct omap_dss_device *dssdev = dev_get_drvdata(&dev->dev);
 	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
 	int r;
 	int level;
 
@@ -290,24 +434,26 @@ static int taal_bl_update_status(struct backlight_device *dev)
 
 	dev_dbg(&dssdev->dev, "update brightness to %d\n", level);
 
+	mutex_lock(&td->lock);
+
 	if (td->use_dsi_bl) {
 		if (td->enabled) {
 			dsi_bus_lock();
 			r = taal_dcs_write_1(DCS_BRIGHTNESS, level);
 			dsi_bus_unlock();
-			if (r)
-				return r;
+		} else {
+			r = 0;
 		}
 	} else {
-		if (!dssdev->set_backlight)
-			return -EINVAL;
-
-		r = dssdev->set_backlight(dssdev, level);
-		if (r)
-			return r;
+		if (!panel_data->set_backlight)
+			r = -EINVAL;
+		else
+			r = panel_data->set_backlight(dssdev, level);
 	}
 
-	return 0;
+	mutex_unlock(&td->lock);
+
+	return r;
 }
 
 static int taal_bl_get_intensity(struct backlight_device *dev)
@@ -344,16 +490,6 @@ static void taal_get_resolution(struct omap_dss_device *dssdev,
 	}
 }
 
-static irqreturn_t taal_te_isr(int irq, void *data)
-{
-	struct omap_dss_device *dssdev = data;
-	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
-
-	complete_all(&td->te_completion);
-
-	return IRQ_HANDLED;
-}
-
 static ssize_t taal_num_errors_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
@@ -362,6 +498,8 @@ static ssize_t taal_num_errors_show(struct device *dev,
 	u8 errors;
 	int r;
 
+	mutex_lock(&td->lock);
+
 	if (td->enabled) {
 		dsi_bus_lock();
 		r = taal_dcs_read_1(DCS_READ_NUM_ERRORS, &errors);
@@ -370,6 +508,8 @@ static ssize_t taal_num_errors_show(struct device *dev,
 		r = -ENODEV;
 	}
 
+	mutex_unlock(&td->lock);
+
 	if (r)
 		return r;
 
@@ -384,6 +524,8 @@ static ssize_t taal_hw_revision_show(struct device *dev,
 	u8 id1, id2, id3;
 	int r;
 
+	mutex_lock(&td->lock);
+
 	if (td->enabled) {
 		dsi_bus_lock();
 		r = taal_get_id(&id1, &id2, &id3);
@@ -392,6 +534,8 @@ static ssize_t taal_hw_revision_show(struct device *dev,
 		r = -ENODEV;
 	}
 
+	mutex_unlock(&td->lock);
+
 	if (r)
 		return r;
 
@@ -441,6 +585,8 @@ static ssize_t store_cabc_mode(struct device *dev,
 	if (i == ARRAY_SIZE(cabc_modes))
 		return -EINVAL;
 
+	mutex_lock(&td->lock);
+
 	if (td->enabled) {
 		dsi_bus_lock();
 		if (!td->cabc_broken)
@@ -450,6 +596,8 @@ static ssize_t store_cabc_mode(struct device *dev,
 
 	td->cabc_mode = i;
 
+	mutex_unlock(&td->lock);
+
 	return count;
 }
 
@@ -488,47 +636,93 @@ static struct attribute_group taal_attr_group = {
 	.attrs = taal_attrs,
 };
 
+static void taal_hw_reset(struct omap_dss_device *dssdev)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
+
+	if (panel_data->reset_gpio == -1)
+		return;
+
+	gpio_set_value(panel_data->reset_gpio, 1);
+	if (td->panel_config->reset_sequence.high)
+		udelay(td->panel_config->reset_sequence.high);
+	/* reset the panel */
+	gpio_set_value(panel_data->reset_gpio, 0);
+	/* assert reset */
+	if (td->panel_config->reset_sequence.low)
+		udelay(td->panel_config->reset_sequence.low);
+	gpio_set_value(panel_data->reset_gpio, 1);
+	/* wait after releasing reset */
+	if (td->panel_config->sleep.hw_reset)
+		msleep(td->panel_config->sleep.hw_reset);
+}
+
 static int taal_probe(struct omap_dss_device *dssdev)
 {
 	struct backlight_properties props;
 	struct taal_data *td;
 	struct backlight_device *bldev;
-	int r;
-
-	const struct omap_video_timings taal_panel_timings = {
-		.x_res		= 864,
-		.y_res		= 480,
-	};
+	struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
+	struct panel_config *panel_config = NULL;
+	int r, i;
 
 	dev_dbg(&dssdev->dev, "probe\n");
 
+	if (!panel_data || !panel_data->name) {
+		r = -EINVAL;
+		goto err;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(panel_configs); i++) {
+		if (strcmp(panel_data->name, panel_configs[i].name) == 0) {
+			panel_config = &panel_configs[i];
+			break;
+		}
+	}
+
+	if (!panel_config) {
+		r = -EINVAL;
+		goto err;
+	}
+
 	dssdev->panel.config = OMAP_DSS_LCD_TFT;
-	dssdev->panel.timings = taal_panel_timings;
+	dssdev->panel.timings = panel_config->timings;
 	dssdev->ctrl.pixel_size = 24;
 
 	td = kzalloc(sizeof(*td), GFP_KERNEL);
 	if (!td) {
 		r = -ENOMEM;
-		goto err0;
+		goto err;
 	}
 	td->dssdev = dssdev;
+	td->panel_config = panel_config;
 
 	mutex_init(&td->lock);
 
+	atomic_set(&td->do_update, 0);
+
+	r = init_regulators(dssdev, panel_config->regulators,
+			panel_config->num_regulators);
+	if (r)
+		goto err_reg;
+
 	td->esd_wq = create_singlethread_workqueue("taal_esd");
 	if (td->esd_wq == NULL) {
 		dev_err(&dssdev->dev, "can't create ESD workqueue\n");
 		r = -ENOMEM;
-		goto err1;
+		goto err_wq;
 	}
 	INIT_DELAYED_WORK_DEFERRABLE(&td->esd_work, taal_esd_work);
 
 	dev_set_drvdata(&dssdev->dev, td);
 
+	taal_hw_reset(dssdev);
+
 	/* if no platform set_backlight() defined, presume DSI backlight
 	 * control */
 	memset(&props, 0, sizeof(struct backlight_properties));
-	if (!dssdev->set_backlight)
+	if (!panel_data->set_backlight)
 		td->use_dsi_bl = true;
 
 	if (td->use_dsi_bl)
@@ -539,7 +733,7 @@ static int taal_probe(struct omap_dss_device *dssdev)
 					  &taal_bl_ops, &props);
 	if (IS_ERR(bldev)) {
 		r = PTR_ERR(bldev);
-		goto err2;
+		goto err_bl;
 	}
 
 	td->bldev = bldev;
@@ -553,13 +747,13 @@ static int taal_probe(struct omap_dss_device *dssdev)
 
 	taal_bl_update_status(bldev);
 
-	if (dssdev->phy.dsi.ext_te) {
-		int gpio = dssdev->phy.dsi.ext_te_gpio;
+	if (panel_data->use_ext_te) {
+		int gpio = panel_data->ext_te_gpio;
 
 		r = gpio_request(gpio, "taal irq");
 		if (r) {
 			dev_err(&dssdev->dev, "GPIO request failed\n");
-			goto err3;
+			goto err_gpio;
 		}
 
 		gpio_direction_input(gpio);
@@ -571,49 +765,52 @@ static int taal_probe(struct omap_dss_device *dssdev)
 		if (r) {
 			dev_err(&dssdev->dev, "IRQ request failed\n");
 			gpio_free(gpio);
-			goto err3;
+			goto err_irq;
 		}
 
-		init_completion(&td->te_completion);
+		INIT_DELAYED_WORK_DEFERRABLE(&td->te_timeout_work,
+					taal_te_timeout_work_callback);
 
-		td->use_ext_te = true;
+		dev_dbg(&dssdev->dev, "Using GPIO TE\n");
 	}
 
 	r = sysfs_create_group(&dssdev->dev.kobj, &taal_attr_group);
 	if (r) {
 		dev_err(&dssdev->dev, "failed to create sysfs files\n");
-		goto err4;
+		goto err_sysfs;
 	}
 
 	return 0;
-err4:
-	if (td->use_ext_te) {
-		int gpio = dssdev->phy.dsi.ext_te_gpio;
-		free_irq(gpio_to_irq(gpio), dssdev);
-		gpio_free(gpio);
-	}
-err3:
+err_sysfs:
+	if (panel_data->use_ext_te)
+		free_irq(gpio_to_irq(panel_data->ext_te_gpio), dssdev);
+err_irq:
+	if (panel_data->use_ext_te)
+		gpio_free(panel_data->ext_te_gpio);
+err_gpio:
 	backlight_device_unregister(bldev);
-err2:
-	cancel_delayed_work_sync(&td->esd_work);
+err_bl:
 	destroy_workqueue(td->esd_wq);
-err1:
+err_wq:
+	free_regulators(panel_config->regulators, panel_config->num_regulators);
+err_reg:
 	kfree(td);
-err0:
+err:
 	return r;
 }
 
 static void taal_remove(struct omap_dss_device *dssdev)
 {
 	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
 	struct backlight_device *bldev;
 
 	dev_dbg(&dssdev->dev, "remove\n");
 
 	sysfs_remove_group(&dssdev->dev.kobj, &taal_attr_group);
 
-	if (td->use_ext_te) {
-		int gpio = dssdev->phy.dsi.ext_te_gpio;
+	if (panel_data->use_ext_te) {
+		int gpio = panel_data->ext_te_gpio;
 		free_irq(gpio_to_irq(gpio), dssdev);
 		gpio_free(gpio);
 	}
@@ -623,9 +820,15 @@ static void taal_remove(struct omap_dss_device *dssdev)
 	taal_bl_update_status(bldev);
 	backlight_device_unregister(bldev);
 
-	cancel_delayed_work_sync(&td->esd_work);
+	cancel_delayed_work(&td->esd_work);
 	destroy_workqueue(td->esd_wq);
 
+	/* reset, to be sure that the panel is in a valid state */
+	taal_hw_reset(dssdev);
+
+	free_regulators(td->panel_config->regulators,
+			td->panel_config->num_regulators);
+
 	kfree(td);
 }
 
@@ -635,23 +838,14 @@ static int taal_power_on(struct omap_dss_device *dssdev)
 	u8 id1, id2, id3;
 	int r;
 
-	if (dssdev->platform_enable) {
-		r = dssdev->platform_enable(dssdev);
-		if (r)
-			return r;
-	}
-
-	/* it seems we have to wait a bit until taal is ready */
-	msleep(5);
-
-	dsi_bus_lock();
-
 	r = omapdss_dsi_display_enable(dssdev);
 	if (r) {
 		dev_err(&dssdev->dev, "failed to enable DSI\n");
 		goto err0;
 	}
 
+	taal_hw_reset(dssdev);
+
 	omapdss_dsi_vc_enable_hs(TCH, false);
 
 	r = taal_sleep_out(td);
@@ -662,34 +856,47 @@ static int taal_power_on(struct omap_dss_device *dssdev)
 	if (r)
 		goto err;
 
-	/* on early revisions CABC is broken */
-	if (id2 == 0x00 || id2 == 0xff || id2 == 0x81)
+	/* on early Taal revisions CABC is broken */
+	if (td->panel_config->type == PANEL_TAAL &&
+		(id2 == 0x00 || id2 == 0xff || id2 == 0x81))
 		td->cabc_broken = true;
 
-	taal_dcs_write_1(DCS_BRIGHTNESS, 0xff);
-	taal_dcs_write_1(DCS_CTRL_DISPLAY, (1<<2) | (1<<5)); /* BL | BCTRL */
+	r = taal_dcs_write_1(DCS_BRIGHTNESS, 0xff);
+	if (r)
+		goto err;
+
+	r = taal_dcs_write_1(DCS_CTRL_DISPLAY,
+			(1<<2) | (1<<5));	/* BL | BCTRL */
+	if (r)
+		goto err;
+
+	r = taal_dcs_write_1(DCS_PIXEL_FORMAT, 0x7); /* 24bit/pixel */
+	if (r)
+		goto err;
 
-	taal_dcs_write_1(DCS_PIXEL_FORMAT, 0x7); /* 24bit/pixel */
+	r = taal_set_addr_mode(td->rotate, td->mirror);
+	if (r)
+		goto err;
 
-	taal_set_addr_mode(td->rotate, td->mirror);
-	if (!td->cabc_broken)
-		taal_dcs_write_1(DCS_WRITE_CABC, td->cabc_mode);
+	if (!td->cabc_broken) {
+		r = taal_dcs_write_1(DCS_WRITE_CABC, td->cabc_mode);
+		if (r)
+			goto err;
+	}
 
-	taal_dcs_write_0(DCS_DISPLAY_ON);
+	r = taal_dcs_write_0(DCS_DISPLAY_ON);
+	if (r)
+		goto err;
 
 	r = _taal_enable_te(dssdev, td->te_enabled);
 	if (r)
 		goto err;
 
-#ifdef TAAL_USE_ESD_CHECK
-	queue_delayed_work(td->esd_wq, &td->esd_work, TAAL_ESD_CHECK_PERIOD);
-#endif
-
 	td->enabled = 1;
 
 	if (!td->intro_printed) {
-		dev_info(&dssdev->dev, "revision %02x.%02x.%02x\n",
-				id1, id2, id3);
+		dev_info(&dssdev->dev, "%s panel revision %02x.%02x.%02x\n",
+			td->panel_config->name, id1, id2, id3);
 		if (td->cabc_broken)
 			dev_info(&dssdev->dev,
 					"old Taal version, CABC disabled\n");
@@ -698,46 +905,44 @@ static int taal_power_on(struct omap_dss_device *dssdev)
 
 	omapdss_dsi_vc_enable_hs(TCH, true);
 
-	dsi_bus_unlock();
-
 	return 0;
 err:
+	dev_err(&dssdev->dev, "error while enabling panel, issuing HW reset\n");
+
+	taal_hw_reset(dssdev);
+
 	omapdss_dsi_display_disable(dssdev);
 err0:
-	dsi_bus_unlock();
-	if (dssdev->platform_disable)
-		dssdev->platform_disable(dssdev);
-
 	return r;
 }
 
 static void taal_power_off(struct omap_dss_device *dssdev)
 {
 	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	int r;
 
-	dsi_bus_lock();
-
-	cancel_delayed_work(&td->esd_work);
-
-	taal_dcs_write_0(DCS_DISPLAY_OFF);
-	taal_sleep_in(td);
+	r = taal_dcs_write_0(DCS_DISPLAY_OFF);
+	if (!r) {
+		r = taal_sleep_in(td);
+		/* HACK: wait a bit so that the message goes through */
+		msleep(10);
+	}
 
-	/* wait a bit so that the message goes through */
-	msleep(10);
+	if (r) {
+		dev_err(&dssdev->dev,
+				"error disabling panel, issuing HW reset\n");
+		taal_hw_reset(dssdev);
+	}
 
 	omapdss_dsi_display_disable(dssdev);
 
-	if (dssdev->platform_disable)
-		dssdev->platform_disable(dssdev);
-
 	td->enabled = 0;
-
-	dsi_bus_unlock();
 }
 
 static int taal_enable(struct omap_dss_device *dssdev)
 {
 	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
 	int r;
 
 	dev_dbg(&dssdev->dev, "enable\n");
@@ -749,10 +954,19 @@ static int taal_enable(struct omap_dss_device *dssdev)
 		goto err;
 	}
 
+	dsi_bus_lock();
+
 	r = taal_power_on(dssdev);
+
+	dsi_bus_unlock();
+
 	if (r)
 		goto err;
 
+	if (panel_data->use_esd_check)
+		queue_delayed_work(td->esd_wq, &td->esd_work,
+				TAAL_ESD_CHECK_PERIOD);
+
 	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
 
 	mutex_unlock(&td->lock);
@@ -772,9 +986,15 @@ static void taal_disable(struct omap_dss_device *dssdev)
 
 	mutex_lock(&td->lock);
 
+	cancel_delayed_work(&td->esd_work);
+
+	dsi_bus_lock();
+
 	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
 		taal_power_off(dssdev);
 
+	dsi_bus_unlock();
+
 	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
 
 	mutex_unlock(&td->lock);
@@ -794,7 +1014,14 @@ static int taal_suspend(struct omap_dss_device *dssdev)
 		goto err;
 	}
 
+	cancel_delayed_work(&td->esd_work);
+
+	dsi_bus_lock();
+
 	taal_power_off(dssdev);
+
+	dsi_bus_unlock();
+
 	dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
 
 	mutex_unlock(&td->lock);
@@ -808,6 +1035,7 @@ err:
 static int taal_resume(struct omap_dss_device *dssdev)
 {
 	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
 	int r;
 
 	dev_dbg(&dssdev->dev, "resume\n");
@@ -819,8 +1047,20 @@ static int taal_resume(struct omap_dss_device *dssdev)
 		goto err;
 	}
 
+	dsi_bus_lock();
+
 	r = taal_power_on(dssdev);
-	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	dsi_bus_unlock();
+
+	if (r) {
+		dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+	} else {
+		dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+		if (panel_data->use_esd_check)
+			queue_delayed_work(td->esd_wq, &td->esd_work,
+					TAAL_ESD_CHECK_PERIOD);
+	}
 
 	mutex_unlock(&td->lock);
 
@@ -837,10 +1077,52 @@ static void taal_framedone_cb(int err, void *data)
 	dsi_bus_unlock();
 }
 
+static irqreturn_t taal_te_isr(int irq, void *data)
+{
+	struct omap_dss_device *dssdev = data;
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	int old;
+	int r;
+
+	old = atomic_cmpxchg(&td->do_update, 1, 0);
+
+	if (old) {
+		cancel_delayed_work(&td->te_timeout_work);
+
+		r = omap_dsi_update(dssdev, TCH,
+				td->update_region.x,
+				td->update_region.y,
+				td->update_region.w,
+				td->update_region.h,
+				taal_framedone_cb, dssdev);
+		if (r)
+			goto err;
+	}
+
+	return IRQ_HANDLED;
+err:
+	dev_err(&dssdev->dev, "start update failed\n");
+	dsi_bus_unlock();
+	return IRQ_HANDLED;
+}
+
+static void taal_te_timeout_work_callback(struct work_struct *work)
+{
+	struct taal_data *td = container_of(work, struct taal_data,
+					te_timeout_work.work);
+	struct omap_dss_device *dssdev = td->dssdev;
+
+	dev_err(&dssdev->dev, "TE not received for 250ms!\n");
+
+	atomic_set(&td->do_update, 0);
+	dsi_bus_unlock();
+}
+
 static int taal_update(struct omap_dss_device *dssdev,
 				    u16 x, u16 y, u16 w, u16 h)
 {
 	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
 	int r;
 
 	dev_dbg(&dssdev->dev, "update %d, %d, %d x %d\n", x, y, w, h);
@@ -853,7 +1135,7 @@ static int taal_update(struct omap_dss_device *dssdev,
 		goto err;
 	}
 
-	r = omap_dsi_prepare_update(dssdev, &x, &y, &w, &h);
+	r = omap_dsi_prepare_update(dssdev, &x, &y, &w, &h, true);
 	if (r)
 		goto err;
 
@@ -861,10 +1143,21 @@ static int taal_update(struct omap_dss_device *dssdev,
 	if (r)
 		goto err;
 
-	r = omap_dsi_update(dssdev, TCH, x, y, w, h,
-			taal_framedone_cb, dssdev);
-	if (r)
-		goto err;
+	if (td->te_enabled && panel_data->use_ext_te) {
+		td->update_region.x = x;
+		td->update_region.y = y;
+		td->update_region.w = w;
+		td->update_region.h = h;
+		barrier();
+		schedule_delayed_work(&td->te_timeout_work,
+				msecs_to_jiffies(250));
+		atomic_set(&td->do_update, 1);
+	} else {
+		r = omap_dsi_update(dssdev, TCH, x, y, w, h,
+				taal_framedone_cb, dssdev);
+		if (r)
+			goto err;
+	}
 
 	/* note: no bus_unlock here. unlock is in framedone_cb */
 	mutex_unlock(&td->lock);
@@ -894,20 +1187,19 @@ static int taal_sync(struct omap_dss_device *dssdev)
 static int _taal_enable_te(struct omap_dss_device *dssdev, bool enable)
 {
 	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
 	int r;
 
-	td->te_enabled = enable;
-
 	if (enable)
 		r = taal_dcs_write_1(DCS_TEAR_ON, 0);
 	else
 		r = taal_dcs_write_0(DCS_TEAR_OFF);
 
-	omapdss_dsi_enable_te(dssdev, enable);
+	if (!panel_data->use_ext_te)
+		omapdss_dsi_enable_te(dssdev, enable);
 
-	/* XXX for some reason, DSI TE breaks if we don't wait here.
-	 * Panel bug? Needs more studying */
-	msleep(100);
+	if (td->panel_config->sleep.enable_te)
+		msleep(td->panel_config->sleep.enable_te);
 
 	return r;
 }
@@ -918,10 +1210,26 @@ static int taal_enable_te(struct omap_dss_device *dssdev, bool enable)
 	int r;
 
 	mutex_lock(&td->lock);
+
+	if (td->te_enabled == enable)
+		goto end;
+
 	dsi_bus_lock();
 
-	r = _taal_enable_te(dssdev, enable);
+	if (td->enabled) {
+		r = _taal_enable_te(dssdev, enable);
+		if (r)
+			goto err;
+	}
+
+	td->te_enabled = enable;
+
+	dsi_bus_unlock();
+end:
+	mutex_unlock(&td->lock);
 
+	return 0;
+err:
 	dsi_bus_unlock();
 	mutex_unlock(&td->lock);
 
@@ -948,6 +1256,10 @@ static int taal_rotate(struct omap_dss_device *dssdev, u8 rotate)
 	dev_dbg(&dssdev->dev, "rotate %d\n", rotate);
 
 	mutex_lock(&td->lock);
+
+	if (td->rotate == rotate)
+		goto end;
+
 	dsi_bus_lock();
 
 	if (td->enabled) {
@@ -959,6 +1271,7 @@ static int taal_rotate(struct omap_dss_device *dssdev, u8 rotate)
 	td->rotate = rotate;
 
 	dsi_bus_unlock();
+end:
 	mutex_unlock(&td->lock);
 	return 0;
 err:
@@ -987,6 +1300,10 @@ static int taal_mirror(struct omap_dss_device *dssdev, bool enable)
 	dev_dbg(&dssdev->dev, "mirror %d\n", enable);
 
 	mutex_lock(&td->lock);
+
+	if (td->mirror == enable)
+		goto end;
+
 	dsi_bus_lock();
 	if (td->enabled) {
 		r = taal_set_addr_mode(td->rotate, enable);
@@ -997,6 +1314,7 @@ static int taal_mirror(struct omap_dss_device *dssdev, bool enable)
 	td->mirror = enable;
 
 	dsi_bus_unlock();
+end:
 	mutex_unlock(&td->lock);
 	return 0;
 err:
@@ -1024,23 +1342,30 @@ static int taal_run_test(struct omap_dss_device *dssdev, int test_num)
 	int r;
 
 	mutex_lock(&td->lock);
+
+	if (!td->enabled) {
+		r = -ENODEV;
+		goto err1;
+	}
+
 	dsi_bus_lock();
 
 	r = taal_dcs_read_1(DCS_GET_ID1, &id1);
 	if (r)
-		goto err;
+		goto err2;
 	r = taal_dcs_read_1(DCS_GET_ID2, &id2);
 	if (r)
-		goto err;
+		goto err2;
 	r = taal_dcs_read_1(DCS_GET_ID3, &id3);
 	if (r)
-		goto err;
+		goto err2;
 
 	dsi_bus_unlock();
 	mutex_unlock(&td->lock);
 	return 0;
-err:
+err2:
 	dsi_bus_unlock();
+err1:
 	mutex_unlock(&td->lock);
 	return r;
 }
@@ -1128,6 +1453,7 @@ static void taal_esd_work(struct work_struct *work)
 	struct taal_data *td = container_of(work, struct taal_data,
 			esd_work.work);
 	struct omap_dss_device *dssdev = td->dssdev;
+	struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
 	u8 state1, state2;
 	int r;
 
@@ -1168,7 +1494,7 @@ static void taal_esd_work(struct work_struct *work)
 	}
 	/* Self-diagnostics result is also shown on TE GPIO line. We need
 	 * to re-enable TE after self diagnostics */
-	if (td->use_ext_te && td->te_enabled) {
+	if (td->te_enabled && panel_data->use_ext_te) {
 		r = taal_dcs_write_1(DCS_TEAR_ON, 0);
 		if (r)
 			goto err;
@@ -1184,6 +1510,7 @@ err:
 	dev_err(&dssdev->dev, "performing LCD reset\n");
 
 	taal_power_off(dssdev);
+	taal_hw_reset(dssdev);
 	taal_power_on(dssdev);
 
 	dsi_bus_unlock();
diff --git a/drivers/video/omap2/displays/panel-toppoly-tdo35s.c b/drivers/video/omap2/displays/panel-toppoly-tdo35s.c
index fa434ca6e4b..e320e67d06f 100644
--- a/drivers/video/omap2/displays/panel-toppoly-tdo35s.c
+++ b/drivers/video/omap2/displays/panel-toppoly-tdo35s.c
@@ -73,8 +73,12 @@ static void toppoly_tdo_panel_power_off(struct omap_dss_device *dssdev)
 
 static int toppoly_tdo_panel_probe(struct omap_dss_device *dssdev)
 {
-	dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
-		OMAP_DSS_LCD_IHS;
+	dssdev->panel.config = OMAP_DSS_LCD_TFT |
+			       OMAP_DSS_LCD_IVS |
+			       OMAP_DSS_LCD_IHS |
+			       OMAP_DSS_LCD_IPC |
+			       OMAP_DSS_LCD_ONOFF;
+
 	dssdev->panel.timings = toppoly_tdo_panel_timings;
 
 	return 0;
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index e777e352dbc..5ecdc000409 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -31,6 +31,7 @@
 #include <linux/seq_file.h>
 #include <linux/delay.h>
 #include <linux/workqueue.h>
+#include <linux/hardirq.h>
 
 #include <plat/sram.h>
 #include <plat/clock.h>
@@ -335,7 +336,7 @@ void dispc_save_context(void)
 void dispc_restore_context(void)
 {
 	RR(SYSCONFIG);
-	RR(IRQENABLE);
+	/*RR(IRQENABLE);*/
 	/*RR(CONTROL);*/
 	RR(CONFIG);
 	RR(DEFAULT_COLOR0);
@@ -472,6 +473,15 @@ void dispc_restore_context(void)
 
 	/* enable last, because LCD & DIGIT enable are here */
 	RR(CONTROL);
+
+	/* clear spurious SYNC_LOST_DIGIT interrupts */
+	dispc_write_reg(DISPC_IRQSTATUS, DISPC_IRQ_SYNC_LOST_DIGIT);
+
+	/*
+	 * enable last so IRQs won't trigger before
+	 * the context is fully restored
+	 */
+	RR(IRQENABLE);
 }
 
 #undef SR
@@ -3019,7 +3029,7 @@ void dispc_fake_vsync_irq(void)
 	u32 irqstatus = DISPC_IRQ_VSYNC;
 	int i;
 
-	local_irq_disable();
+	WARN_ON(!in_interrupt());
 
 	for (i = 0; i < DISPC_MAX_NR_ISRS; i++) {
 		struct omap_dispc_isr_data *isr_data;
@@ -3031,8 +3041,6 @@ void dispc_fake_vsync_irq(void)
 		if (isr_data->mask & irqstatus)
 			isr_data->isr(isr_data->arg, irqstatus);
 	}
-
-	local_irq_enable();
 }
 #endif
 
diff --git a/drivers/video/omap2/dss/display.c b/drivers/video/omap2/dss/display.c
index ef8c8529dda..22dd7a474f7 100644
--- a/drivers/video/omap2/dss/display.c
+++ b/drivers/video/omap2/dss/display.c
@@ -82,6 +82,9 @@ static ssize_t display_upd_mode_store(struct device *dev,
 	int val, r;
 	enum omap_dss_update_mode mode;
 
+	if (!dssdev->driver->set_update_mode)
+		return -EINVAL;
+
 	val = simple_strtoul(buf, NULL, 10);
 
 	switch (val) {
@@ -343,7 +346,6 @@ int omapdss_default_get_recommended_bpp(struct omap_dss_device *dssdev)
 	case OMAP_DISPLAY_TYPE_VENC:
 	case OMAP_DISPLAY_TYPE_SDI:
 		return 24;
-		return 24;
 	default:
 		BUG();
 	}
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 3af207b2bde..b3fa3a7db91 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -165,6 +165,14 @@ struct dsi_reg { u16 idx; };
 #define DSI_CIO_IRQ_ERRCONTENTIONLP1_3	(1 << 25)
 #define DSI_CIO_IRQ_ULPSACTIVENOT_ALL0	(1 << 30)
 #define DSI_CIO_IRQ_ULPSACTIVENOT_ALL1	(1 << 31)
+#define DSI_CIO_IRQ_ERROR_MASK \
+	(DSI_CIO_IRQ_ERRSYNCESC1 | DSI_CIO_IRQ_ERRSYNCESC2 | \
+	 DSI_CIO_IRQ_ERRSYNCESC3 | DSI_CIO_IRQ_ERRESC1 | DSI_CIO_IRQ_ERRESC2 | \
+	 DSI_CIO_IRQ_ERRESC3 | DSI_CIO_IRQ_ERRCONTROL1 | \
+	 DSI_CIO_IRQ_ERRCONTROL2 | DSI_CIO_IRQ_ERRCONTROL3 | \
+	 DSI_CIO_IRQ_ERRCONTENTIONLP0_1 | DSI_CIO_IRQ_ERRCONTENTIONLP1_1 | \
+	 DSI_CIO_IRQ_ERRCONTENTIONLP0_2 | DSI_CIO_IRQ_ERRCONTENTIONLP1_2 | \
+	 DSI_CIO_IRQ_ERRCONTENTIONLP0_3 | DSI_CIO_IRQ_ERRCONTENTIONLP1_3)
 
 #define DSI_DT_DCS_SHORT_WRITE_0	0x05
 #define DSI_DT_DCS_SHORT_WRITE_1	0x15
@@ -232,13 +240,15 @@ static struct
 	unsigned pll_locked;
 
 	struct completion bta_completion;
+	void (*bta_callback)(void);
 
 	int update_channel;
 	struct dsi_update_region update_region;
 
 	bool te_enabled;
 
-	struct work_struct framedone_work;
+	struct workqueue_struct *workqueue;
+
 	void (*framedone_callback)(int, void *);
 	void *framedone_data;
 
@@ -509,9 +519,13 @@ void dsi_irq_handler(void)
 		dss_collect_irq_stats(vcstatus, dsi.irq_stats.vc_irqs[i]);
 #endif
 
-		if (vcstatus & DSI_VC_IRQ_BTA)
+		if (vcstatus & DSI_VC_IRQ_BTA) {
 			complete(&dsi.bta_completion);
 
+			if (dsi.bta_callback)
+				dsi.bta_callback();
+		}
+
 		if (vcstatus & DSI_VC_IRQ_ERROR_MASK) {
 			DSSERR("DSI VC(%d) error, vc irqstatus %x\n",
 				       i, vcstatus);
@@ -536,8 +550,12 @@ void dsi_irq_handler(void)
 		/* flush posted write */
 		dsi_read_reg(DSI_COMPLEXIO_IRQ_STATUS);
 
-		DSSERR("DSI CIO error, cio irqstatus %x\n", ciostatus);
-		print_irq_status_cio(ciostatus);
+		if (ciostatus & DSI_CIO_IRQ_ERROR_MASK) {
+			DSSERR("DSI CIO error, cio irqstatus %x\n", ciostatus);
+			print_irq_status_cio(ciostatus);
+		} else if (debug_irq) {
+			print_irq_status_cio(ciostatus);
+		}
 	}
 
 	dsi_write_reg(DSI_IRQSTATUS, irqstatus & ~DSI_IRQ_CHANNEL_MASK);
@@ -584,11 +602,8 @@ static void _dsi_initialize_irq(void)
 	for (i = 0; i < 4; ++i)
 		dsi_write_reg(DSI_VC_IRQENABLE(i), l);
 
-	/* XXX zonda responds incorrectly, causing control error:
-	   Exit from LP-ESC mode to LP11 uses wrong transition states on the
-	   data lines LP0 and LN0. */
-	dsi_write_reg(DSI_COMPLEXIO_IRQ_ENABLE,
-			-1 & (~DSI_CIO_IRQ_ERRCONTROL2));
+	l = DSI_CIO_IRQ_ERROR_MASK;
+	dsi_write_reg(DSI_COMPLEXIO_IRQ_ENABLE, l);
 }
 
 static u32 dsi_get_errors(void)
@@ -1098,6 +1113,7 @@ int dsi_pll_init(struct omap_dss_device *dssdev, bool enable_hsclk,
 	if (wait_for_bit_change(DSI_PLL_STATUS, 0, 1) != 1) {
 		DSSERR("PLL not coming out of reset.\n");
 		r = -ENODEV;
+		dispc_pck_free_enable(0);
 		goto err1;
 	}
 
@@ -1740,42 +1756,52 @@ static void dsi_vc_initial_config(int channel)
 	dsi.vc[channel].mode = DSI_VC_MODE_L4;
 }
 
-static void dsi_vc_config_l4(int channel)
+static int dsi_vc_config_l4(int channel)
 {
 	if (dsi.vc[channel].mode == DSI_VC_MODE_L4)
-		return;
+		return 0;
 
 	DSSDBGF("%d", channel);
 
 	dsi_vc_enable(channel, 0);
 
-	if (REG_GET(DSI_VC_CTRL(channel), 15, 15)) /* VC_BUSY */
+	/* VC_BUSY */
+	if (wait_for_bit_change(DSI_VC_CTRL(channel), 15, 0) != 0) {
 		DSSERR("vc(%d) busy when trying to config for L4\n", channel);
+		return -EIO;
+	}
 
 	REG_FLD_MOD(DSI_VC_CTRL(channel), 0, 1, 1); /* SOURCE, 0 = L4 */
 
 	dsi_vc_enable(channel, 1);
 
 	dsi.vc[channel].mode = DSI_VC_MODE_L4;
+
+	return 0;
 }
 
-static void dsi_vc_config_vp(int channel)
+static int dsi_vc_config_vp(int channel)
 {
 	if (dsi.vc[channel].mode == DSI_VC_MODE_VP)
-		return;
+		return 0;
 
 	DSSDBGF("%d", channel);
 
 	dsi_vc_enable(channel, 0);
 
-	if (REG_GET(DSI_VC_CTRL(channel), 15, 15)) /* VC_BUSY */
+	/* VC_BUSY */
+	if (wait_for_bit_change(DSI_VC_CTRL(channel), 15, 0) != 0) {
 		DSSERR("vc(%d) busy when trying to config for VP\n", channel);
+		return -EIO;
+	}
 
 	REG_FLD_MOD(DSI_VC_CTRL(channel), 1, 1, 1); /* SOURCE, 1 = video port */
 
 	dsi_vc_enable(channel, 1);
 
 	dsi.vc[channel].mode = DSI_VC_MODE_VP;
+
+	return 0;
 }
 
 
@@ -1854,19 +1880,19 @@ static u16 dsi_vc_flush_receive_data(int channel)
 		u32 val;
 		u8 dt;
 		val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel));
-		DSSDBG("\trawval %#08x\n", val);
+		DSSERR("\trawval %#08x\n", val);
 		dt = FLD_GET(val, 5, 0);
 		if (dt == DSI_DT_RX_ACK_WITH_ERR) {
 			u16 err = FLD_GET(val, 23, 8);
 			dsi_show_rx_ack_with_err(err);
 		} else if (dt == DSI_DT_RX_SHORT_READ_1) {
-			DSSDBG("\tDCS short response, 1 byte: %#x\n",
+			DSSERR("\tDCS short response, 1 byte: %#x\n",
 					FLD_GET(val, 23, 8));
 		} else if (dt == DSI_DT_RX_SHORT_READ_2) {
-			DSSDBG("\tDCS short response, 2 byte: %#x\n",
+			DSSERR("\tDCS short response, 2 byte: %#x\n",
 					FLD_GET(val, 23, 8));
 		} else if (dt == DSI_DT_RX_DCS_LONG_READ) {
-			DSSDBG("\tDCS long response, len %d\n",
+			DSSERR("\tDCS long response, len %d\n",
 					FLD_GET(val, 23, 8));
 			dsi_vc_flush_long_data(channel);
 		} else {
@@ -2087,6 +2113,13 @@ int dsi_vc_dcs_write(int channel, u8 *data, int len)
 	if (r)
 		goto err;
 
+	if (REG_GET(DSI_VC_CTRL(channel), 20, 20)) {	/* RX_FIFO_NOT_EMPTY */
+		DSSERR("rx fifo not empty after write, dumping data:\n");
+		dsi_vc_flush_receive_data(channel);
+		r = -EIO;
+		goto err;
+	}
+
 	return 0;
 err:
 	DSSERR("dsi_vc_dcs_write(ch %d, cmd 0x%02x, len %d) failed\n",
@@ -2233,11 +2266,12 @@ int dsi_vc_dcs_read_1(int channel, u8 dcs_cmd, u8 *data)
 }
 EXPORT_SYMBOL(dsi_vc_dcs_read_1);
 
-int dsi_vc_dcs_read_2(int channel, u8 dcs_cmd, u16 *data)
+int dsi_vc_dcs_read_2(int channel, u8 dcs_cmd, u8 *data1, u8 *data2)
 {
+	u8 buf[2];
 	int r;
 
-	r = dsi_vc_dcs_read(channel, dcs_cmd, (u8 *)data, 2);
+	r = dsi_vc_dcs_read(channel, dcs_cmd, buf, 2);
 
 	if (r < 0)
 		return r;
@@ -2245,231 +2279,122 @@ int dsi_vc_dcs_read_2(int channel, u8 dcs_cmd, u16 *data)
 	if (r != 2)
 		return -EIO;
 
+	*data1 = buf[0];
+	*data2 = buf[1];
+
 	return 0;
 }
 EXPORT_SYMBOL(dsi_vc_dcs_read_2);
 
 int dsi_vc_set_max_rx_packet_size(int channel, u16 len)
 {
-	int r;
-	r = dsi_vc_send_short(channel, DSI_DT_SET_MAX_RET_PKG_SIZE,
+	return dsi_vc_send_short(channel, DSI_DT_SET_MAX_RET_PKG_SIZE,
 			len, 0);
-
-	if (r)
-		return r;
-
-	r = dsi_vc_send_bta_sync(channel);
-
-	return r;
 }
 EXPORT_SYMBOL(dsi_vc_set_max_rx_packet_size);
 
-static void dsi_set_lp_rx_timeout(unsigned long ns)
+static void dsi_set_lp_rx_timeout(unsigned ticks, bool x4, bool x16)
 {
-	u32 r;
-	unsigned x4, x16;
 	unsigned long fck;
-	unsigned long ticks;
+	unsigned long total_ticks;
+	u32 r;
 
-	/* ticks in DSI_FCK */
+	BUG_ON(ticks > 0x1fff);
 
+	/* ticks in DSI_FCK */
 	fck = dsi_fclk_rate();
-	ticks = (fck / 1000 / 1000) * ns / 1000;
-	x4 = 0;
-	x16 = 0;
-
-	if (ticks > 0x1fff) {
-		ticks = (fck / 1000 / 1000) * ns / 1000 / 4;
-		x4 = 1;
-		x16 = 0;
-	}
-
-	if (ticks > 0x1fff) {
-		ticks = (fck / 1000 / 1000) * ns / 1000 / 16;
-		x4 = 0;
-		x16 = 1;
-	}
-
-	if (ticks > 0x1fff) {
-		ticks = (fck / 1000 / 1000) * ns / 1000 / (4 * 16);
-		x4 = 1;
-		x16 = 1;
-	}
-
-	if (ticks > 0x1fff) {
-		DSSWARN("LP_TX_TO over limit, setting it to max\n");
-		ticks = 0x1fff;
-		x4 = 1;
-		x16 = 1;
-	}
 
 	r = dsi_read_reg(DSI_TIMING2);
 	r = FLD_MOD(r, 1, 15, 15);	/* LP_RX_TO */
-	r = FLD_MOD(r, x16, 14, 14);	/* LP_RX_TO_X16 */
-	r = FLD_MOD(r, x4, 13, 13);	/* LP_RX_TO_X4 */
+	r = FLD_MOD(r, x16 ? 1 : 0, 14, 14);	/* LP_RX_TO_X16 */
+	r = FLD_MOD(r, x4 ? 1 : 0, 13, 13);	/* LP_RX_TO_X4 */
 	r = FLD_MOD(r, ticks, 12, 0);	/* LP_RX_COUNTER */
 	dsi_write_reg(DSI_TIMING2, r);
 
-	DSSDBG("LP_RX_TO %lu ns (%#lx ticks%s%s)\n",
-			(ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) /
-			(fck / 1000 / 1000),
-			ticks, x4 ? " x4" : "", x16 ? " x16" : "");
+	total_ticks = ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1);
+
+	DSSDBG("LP_RX_TO %lu ticks (%#x%s%s) = %lu ns\n",
+			total_ticks,
+			ticks, x4 ? " x4" : "", x16 ? " x16" : "",
+			(total_ticks * 1000) / (fck / 1000 / 1000));
 }
 
-static void dsi_set_ta_timeout(unsigned long ns)
+static void dsi_set_ta_timeout(unsigned ticks, bool x8, bool x16)
 {
-	u32 r;
-	unsigned x8, x16;
 	unsigned long fck;
-	unsigned long ticks;
+	unsigned long total_ticks;
+	u32 r;
+
+	BUG_ON(ticks > 0x1fff);
 
 	/* ticks in DSI_FCK */
 	fck = dsi_fclk_rate();
-	ticks = (fck / 1000 / 1000) * ns / 1000;
-	x8 = 0;
-	x16 = 0;
-
-	if (ticks > 0x1fff) {
-		ticks = (fck / 1000 / 1000) * ns / 1000 / 8;
-		x8 = 1;
-		x16 = 0;
-	}
-
-	if (ticks > 0x1fff) {
-		ticks = (fck / 1000 / 1000) * ns / 1000 / 16;
-		x8 = 0;
-		x16 = 1;
-	}
-
-	if (ticks > 0x1fff) {
-		ticks = (fck / 1000 / 1000) * ns / 1000 / (8 * 16);
-		x8 = 1;
-		x16 = 1;
-	}
-
-	if (ticks > 0x1fff) {
-		DSSWARN("TA_TO over limit, setting it to max\n");
-		ticks = 0x1fff;
-		x8 = 1;
-		x16 = 1;
-	}
 
 	r = dsi_read_reg(DSI_TIMING1);
 	r = FLD_MOD(r, 1, 31, 31);	/* TA_TO */
-	r = FLD_MOD(r, x16, 30, 30);	/* TA_TO_X16 */
-	r = FLD_MOD(r, x8, 29, 29);	/* TA_TO_X8 */
+	r = FLD_MOD(r, x16 ? 1 : 0, 30, 30);	/* TA_TO_X16 */
+	r = FLD_MOD(r, x8 ? 1 : 0, 29, 29);	/* TA_TO_X8 */
 	r = FLD_MOD(r, ticks, 28, 16);	/* TA_TO_COUNTER */
 	dsi_write_reg(DSI_TIMING1, r);
 
-	DSSDBG("TA_TO %lu ns (%#lx ticks%s%s)\n",
-			(ticks * (x16 ? 16 : 1) * (x8 ? 8 : 1) * 1000) /
-			(fck / 1000 / 1000),
-			ticks, x8 ? " x8" : "", x16 ? " x16" : "");
+	total_ticks = ticks * (x16 ? 16 : 1) * (x8 ? 8 : 1);
+
+	DSSDBG("TA_TO %lu ticks (%#x%s%s) = %lu ns\n",
+			total_ticks,
+			ticks, x8 ? " x8" : "", x16 ? " x16" : "",
+			(total_ticks * 1000) / (fck / 1000 / 1000));
 }
 
-static void dsi_set_stop_state_counter(unsigned long ns)
+static void dsi_set_stop_state_counter(unsigned ticks, bool x4, bool x16)
 {
-	u32 r;
-	unsigned x4, x16;
 	unsigned long fck;
-	unsigned long ticks;
+	unsigned long total_ticks;
+	u32 r;
 
-	/* ticks in DSI_FCK */
+	BUG_ON(ticks > 0x1fff);
 
+	/* ticks in DSI_FCK */
 	fck = dsi_fclk_rate();
-	ticks = (fck / 1000 / 1000) * ns / 1000;
-	x4 = 0;
-	x16 = 0;
-
-	if (ticks > 0x1fff) {
-		ticks = (fck / 1000 / 1000) * ns / 1000 / 4;
-		x4 = 1;
-		x16 = 0;
-	}
-
-	if (ticks > 0x1fff) {
-		ticks = (fck / 1000 / 1000) * ns / 1000 / 16;
-		x4 = 0;
-		x16 = 1;
-	}
-
-	if (ticks > 0x1fff) {
-		ticks = (fck / 1000 / 1000) * ns / 1000 / (4 * 16);
-		x4 = 1;
-		x16 = 1;
-	}
-
-	if (ticks > 0x1fff) {
-		DSSWARN("STOP_STATE_COUNTER_IO over limit, "
-				"setting it to max\n");
-		ticks = 0x1fff;
-		x4 = 1;
-		x16 = 1;
-	}
 
 	r = dsi_read_reg(DSI_TIMING1);
 	r = FLD_MOD(r, 1, 15, 15);	/* FORCE_TX_STOP_MODE_IO */
-	r = FLD_MOD(r, x16, 14, 14);	/* STOP_STATE_X16_IO */
-	r = FLD_MOD(r, x4, 13, 13);	/* STOP_STATE_X4_IO */
+	r = FLD_MOD(r, x16 ? 1 : 0, 14, 14);	/* STOP_STATE_X16_IO */
+	r = FLD_MOD(r, x4 ? 1 : 0, 13, 13);	/* STOP_STATE_X4_IO */
 	r = FLD_MOD(r, ticks, 12, 0);	/* STOP_STATE_COUNTER_IO */
 	dsi_write_reg(DSI_TIMING1, r);
 
-	DSSDBG("STOP_STATE_COUNTER %lu ns (%#lx ticks%s%s)\n",
-			(ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) /
-			(fck / 1000 / 1000),
-			ticks, x4 ? " x4" : "", x16 ? " x16" : "");
+	total_ticks = ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1);
+
+	DSSDBG("STOP_STATE_COUNTER %lu ticks (%#x%s%s) = %lu ns\n",
+			total_ticks,
+			ticks, x4 ? " x4" : "", x16 ? " x16" : "",
+			(total_ticks * 1000) / (fck / 1000 / 1000));
 }
 
-static void dsi_set_hs_tx_timeout(unsigned long ns)
+static void dsi_set_hs_tx_timeout(unsigned ticks, bool x4, bool x16)
 {
-	u32 r;
-	unsigned x4, x16;
 	unsigned long fck;
-	unsigned long ticks;
+	unsigned long total_ticks;
+	u32 r;
 
-	/* ticks in TxByteClkHS */
+	BUG_ON(ticks > 0x1fff);
 
+	/* ticks in TxByteClkHS */
 	fck = dsi_get_txbyteclkhs();
-	ticks = (fck / 1000 / 1000) * ns / 1000;
-	x4 = 0;
-	x16 = 0;
-
-	if (ticks > 0x1fff) {
-		ticks = (fck / 1000 / 1000) * ns / 1000 / 4;
-		x4 = 1;
-		x16 = 0;
-	}
-
-	if (ticks > 0x1fff) {
-		ticks = (fck / 1000 / 1000) * ns / 1000 / 16;
-		x4 = 0;
-		x16 = 1;
-	}
-
-	if (ticks > 0x1fff) {
-		ticks = (fck / 1000 / 1000) * ns / 1000 / (4 * 16);
-		x4 = 1;
-		x16 = 1;
-	}
-
-	if (ticks > 0x1fff) {
-		DSSWARN("HS_TX_TO over limit, setting it to max\n");
-		ticks = 0x1fff;
-		x4 = 1;
-		x16 = 1;
-	}
 
 	r = dsi_read_reg(DSI_TIMING2);
 	r = FLD_MOD(r, 1, 31, 31);	/* HS_TX_TO */
-	r = FLD_MOD(r, x16, 30, 30);	/* HS_TX_TO_X16 */
-	r = FLD_MOD(r, x4, 29, 29);	/* HS_TX_TO_X8 (4 really) */
+	r = FLD_MOD(r, x16 ? 1 : 0, 30, 30);	/* HS_TX_TO_X16 */
+	r = FLD_MOD(r, x4 ? 1 : 0, 29, 29);	/* HS_TX_TO_X8 (4 really) */
 	r = FLD_MOD(r, ticks, 28, 16);	/* HS_TX_TO_COUNTER */
 	dsi_write_reg(DSI_TIMING2, r);
 
-	DSSDBG("HS_TX_TO %lu ns (%#lx ticks%s%s)\n",
-			(ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) /
-			(fck / 1000 / 1000),
-			ticks, x4 ? " x4" : "", x16 ? " x16" : "");
+	total_ticks = ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1);
+
+	DSSDBG("HS_TX_TO %lu ticks (%#x%s%s) = %lu ns\n",
+			total_ticks,
+			ticks, x4 ? " x4" : "", x16 ? " x16" : "",
+			(total_ticks * 1000) / (fck / 1000 / 1000));
 }
 static int dsi_proto_config(struct omap_dss_device *dssdev)
 {
@@ -2487,10 +2412,10 @@ static int dsi_proto_config(struct omap_dss_device *dssdev)
 			DSI_FIFO_SIZE_32);
 
 	/* XXX what values for the timeouts? */
-	dsi_set_stop_state_counter(1000);
-	dsi_set_ta_timeout(6400000);
-	dsi_set_lp_rx_timeout(48000);
-	dsi_set_hs_tx_timeout(1000000);
+	dsi_set_stop_state_counter(0x1000, false, false);
+	dsi_set_ta_timeout(0x1fff, true, true);
+	dsi_set_lp_rx_timeout(0x1fff, true, true);
+	dsi_set_hs_tx_timeout(0x1fff, true, true);
 
 	switch (dssdev->ctrl.pixel_size) {
 	case 16:
@@ -2759,6 +2684,7 @@ static void dsi_update_screen_dispc(struct omap_dss_device *dssdev,
 	unsigned packet_payload;
 	unsigned packet_len;
 	u32 l;
+	int r;
 	const unsigned channel = dsi.update_channel;
 	/* line buffer is 1024 x 24bits */
 	/* XXX: for some reason using full buffer size causes considerable TX
@@ -2809,8 +2735,9 @@ static void dsi_update_screen_dispc(struct omap_dss_device *dssdev,
 
 	dsi_perf_mark_start();
 
-	schedule_delayed_work(&dsi.framedone_timeout_work,
+	r = queue_delayed_work(dsi.workqueue, &dsi.framedone_timeout_work,
 			msecs_to_jiffies(250));
+	BUG_ON(r == 0);
 
 	dss_start_update(dssdev);
 
@@ -2834,62 +2761,70 @@ static void dsi_te_timeout(unsigned long arg)
 }
 #endif
 
-static void dsi_framedone_timeout_work_callback(struct work_struct *work)
+static void dsi_handle_framedone(int error)
 {
-	int r;
 	const int channel = dsi.update_channel;
 
-	DSSERR("Framedone not received for 250ms!\n");
+	cancel_delayed_work(&dsi.framedone_timeout_work);
+
+	dsi_vc_disable_bta_irq(channel);
 
 	/* SIDLEMODE back to smart-idle */
 	dispc_enable_sidle();
 
+	dsi.bta_callback = NULL;
+
 	if (dsi.te_enabled) {
 		/* enable LP_RX_TO again after the TE */
 		REG_FLD_MOD(DSI_TIMING2, 1, 15, 15); /* LP_RX_TO */
 	}
 
-	/* Send BTA after the frame. We need this for the TE to work, as TE
-	 * trigger is only sent for BTAs without preceding packet. Thus we need
-	 * to BTA after the pixel packets so that next BTA will cause TE
-	 * trigger.
-	 *
-	 * This is not needed when TE is not in use, but we do it anyway to
-	 * make sure that the transfer has been completed. It would be more
-	 * optimal, but more complex, to wait only just before starting next
-	 * transfer. */
-	r = dsi_vc_send_bta_sync(channel);
-	if (r)
-		DSSERR("BTA after framedone failed\n");
-
 	/* RX_FIFO_NOT_EMPTY */
 	if (REG_GET(DSI_VC_CTRL(channel), 20, 20)) {
 		DSSERR("Received error during frame transfer:\n");
 		dsi_vc_flush_receive_data(channel);
+		if (!error)
+			error = -EIO;
 	}
 
-	dsi.framedone_callback(-ETIMEDOUT, dsi.framedone_data);
+	dsi.framedone_callback(error, dsi.framedone_data);
+
+	if (!error)
+		dsi_perf_show("DISPC");
 }
 
-static void dsi_framedone_irq_callback(void *data, u32 mask)
+static void dsi_framedone_timeout_work_callback(struct work_struct *work)
 {
-	/* Note: We get FRAMEDONE when DISPC has finished sending pixels and
-	 * turns itself off. However, DSI still has the pixels in its buffers,
-	 * and is sending the data.
-	 */
+	/* XXX While extremely unlikely, we could get FRAMEDONE interrupt after
+	 * 250ms which would conflict with this timeout work. What should be
+	 * done is first cancel the transfer on the HW, and then cancel the
+	 * possibly scheduled framedone work. However, cancelling the transfer
+	 * on the HW is buggy, and would probably require resetting the whole
+	 * DSI */
 
-	/* SIDLEMODE back to smart-idle */
-	dispc_enable_sidle();
+	DSSERR("Framedone not received for 250ms!\n");
 
-	schedule_work(&dsi.framedone_work);
+	dsi_handle_framedone(-ETIMEDOUT);
 }
 
-static void dsi_handle_framedone(void)
+static void dsi_framedone_bta_callback(void)
+{
+	dsi_handle_framedone(0);
+
+#ifdef CONFIG_OMAP2_DSS_FAKE_VSYNC
+	dispc_fake_vsync_irq();
+#endif
+}
+
+static void dsi_framedone_irq_callback(void *data, u32 mask)
 {
-	int r;
 	const int channel = dsi.update_channel;
+	int r;
 
-	DSSDBG("FRAMEDONE\n");
+	/* Note: We get FRAMEDONE when DISPC has finished sending pixels and
+	 * turns itself off. However, DSI still has the pixels in its buffers,
+	 * and is sending the data.
+	 */
 
 	if (dsi.te_enabled) {
 		/* enable LP_RX_TO again after the TE */
@@ -2904,37 +2839,30 @@ static void dsi_handle_framedone(void)
 	 * This is not needed when TE is not in use, but we do it anyway to
 	 * make sure that the transfer has been completed. It would be more
 	 * optimal, but more complex, to wait only just before starting next
-	 * transfer. */
-	r = dsi_vc_send_bta_sync(channel);
-	if (r)
-		DSSERR("BTA after framedone failed\n");
-
-	/* RX_FIFO_NOT_EMPTY */
-	if (REG_GET(DSI_VC_CTRL(channel), 20, 20)) {
-		DSSERR("Received error during frame transfer:\n");
-		dsi_vc_flush_receive_data(channel);
-	}
-
-#ifdef CONFIG_OMAP2_DSS_FAKE_VSYNC
-	dispc_fake_vsync_irq();
-#endif
-}
-
-static void dsi_framedone_work_callback(struct work_struct *work)
-{
-	DSSDBGF();
+	 * transfer.
+	 *
+	 * Also, as there's no interrupt telling when the transfer has been
+	 * done and the channel could be reconfigured, the only way is to
+	 * busyloop until TE_SIZE is zero. With BTA we can do this
+	 * asynchronously.
+	 * */
 
-	cancel_delayed_work_sync(&dsi.framedone_timeout_work);
+	dsi.bta_callback = dsi_framedone_bta_callback;
 
-	dsi_handle_framedone();
+	barrier();
 
-	dsi_perf_show("DISPC");
+	dsi_vc_enable_bta_irq(channel);
 
-	dsi.framedone_callback(0, dsi.framedone_data);
+	r = dsi_vc_send_bta(channel);
+	if (r) {
+		DSSERR("BTA after framedone failed\n");
+		dsi_handle_framedone(-EIO);
+	}
 }
 
 int omap_dsi_prepare_update(struct omap_dss_device *dssdev,
-				    u16 *x, u16 *y, u16 *w, u16 *h)
+				    u16 *x, u16 *y, u16 *w, u16 *h,
+				    bool enlarge_update_area)
 {
 	u16 dw, dh;
 
@@ -2958,7 +2886,8 @@ int omap_dsi_prepare_update(struct omap_dss_device *dssdev,
 	dsi_perf_mark_setup();
 
 	if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
-		dss_setup_partial_planes(dssdev, x, y, w, h);
+		dss_setup_partial_planes(dssdev, x, y, w, h,
+				enlarge_update_area);
 		dispc_set_lcd_size(*w, *h);
 	}
 
@@ -2973,6 +2902,12 @@ int omap_dsi_update(struct omap_dss_device *dssdev,
 {
 	dsi.update_channel = channel;
 
+	/* OMAP DSS cannot send updates of odd widths.
+	 * omap_dsi_prepare_update() makes the widths even, but add a BUG_ON
+	 * here to make sure we catch erroneous updates. Otherwise we'll only
+	 * see rather obscure HW error happening, as DSS halts. */
+	BUG_ON(x % 2 == 1);
+
 	if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
 		dsi.framedone_callback = callback;
 		dsi.framedone_data = data;
@@ -2985,7 +2920,12 @@ int omap_dsi_update(struct omap_dss_device *dssdev,
 
 		dsi_update_screen_dispc(dssdev, x, y, w, h);
 	} else {
-		dsi_update_screen_l4(dssdev, x, y, w, h);
+		int r;
+
+		r = dsi_update_screen_l4(dssdev, x, y, w, h);
+		if (r)
+			return r;
+
 		dsi_perf_show("L4");
 		callback(0, data);
 	}
@@ -3048,8 +2988,10 @@ static int dsi_configure_dsi_clocks(struct omap_dss_device *dssdev)
 	cinfo.regm3 = dssdev->phy.dsi.div.regm3;
 	cinfo.regm4 = dssdev->phy.dsi.div.regm4;
 	r = dsi_calc_clock_rates(&cinfo);
-	if (r)
+	if (r) {
+		DSSERR("Failed to calc dsi clocks\n");
 		return r;
+	}
 
 	r = dsi_pll_set_clock_div(&cinfo);
 	if (r) {
@@ -3147,6 +3089,13 @@ err0:
 
 static void dsi_display_uninit_dsi(struct omap_dss_device *dssdev)
 {
+	/* disable interface */
+	dsi_if_enable(0);
+	dsi_vc_enable(0, 0);
+	dsi_vc_enable(1, 0);
+	dsi_vc_enable(2, 0);
+	dsi_vc_enable(3, 0);
+
 	dss_select_dispc_clk_source(DSS_SRC_DSS1_ALWON_FCLK);
 	dss_select_dsi_clk_source(DSS_SRC_DSS1_ALWON_FCLK);
 	dsi_complexio_uninit();
@@ -3257,7 +3206,7 @@ void dsi_get_overlay_fifo_thresholds(enum omap_plane plane,
 	burst_size_bytes = 16 * 32 / 8;
 
 	*fifo_high = fifo_size - burst_size_bytes;
-	*fifo_low = fifo_size - burst_size_bytes * 8;
+	*fifo_low = fifo_size - burst_size_bytes * 2;
 }
 
 int dsi_init_display(struct omap_dss_device *dssdev)
@@ -3274,6 +3223,18 @@ int dsi_init_display(struct omap_dss_device *dssdev)
 	return 0;
 }
 
+void dsi_wait_dsi1_pll_active(void)
+{
+	if (wait_for_bit_change(DSI_PLL_STATUS, 7, 1) != 1)
+		DSSERR("DSI1 PLL clock not active\n");
+}
+
+void dsi_wait_dsi2_pll_active(void)
+{
+	if (wait_for_bit_change(DSI_PLL_STATUS, 8, 1) != 1)
+		DSSERR("DSI2 PLL clock not active\n");
+}
+
 int dsi_init(struct platform_device *pdev)
 {
 	u32 rev;
@@ -3292,7 +3253,10 @@ int dsi_init(struct platform_device *pdev)
 	mutex_init(&dsi.lock);
 	sema_init(&dsi.bus_lock, 1);
 
-	INIT_WORK(&dsi.framedone_work, dsi_framedone_work_callback);
+	dsi.workqueue = create_singlethread_workqueue("dsi");
+	if (dsi.workqueue == NULL)
+		return -ENOMEM;
+
 	INIT_DELAYED_WORK_DEFERRABLE(&dsi.framedone_timeout_work,
 			dsi_framedone_timeout_work_callback);
 
@@ -3328,6 +3292,7 @@ int dsi_init(struct platform_device *pdev)
 err2:
 	iounmap(dsi.base);
 err1:
+	destroy_workqueue(dsi.workqueue);
 	return r;
 }
 
@@ -3335,6 +3300,8 @@ void dsi_exit(void)
 {
 	iounmap(dsi.base);
 
+	destroy_workqueue(dsi.workqueue);
+
 	DSSDBG("omap_dsi_exit\n");
 }
 
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index 24b18258654..77c3621c917 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -265,6 +265,9 @@ void dss_select_dispc_clk_source(enum dss_clk_source clk_src)
 
 	b = clk_src == DSS_SRC_DSS1_ALWON_FCLK ? 0 : 1;
 
+	if (clk_src == DSS_SRC_DSI1_PLL_FCLK)
+		dsi_wait_dsi1_pll_active();
+
 	REG_FLD_MOD(DSS_CONTROL, b, 0, 0);	/* DISPC_CLK_SWITCH */
 
 	dss.dispc_clk_source = clk_src;
@@ -279,6 +282,9 @@ void dss_select_dsi_clk_source(enum dss_clk_source clk_src)
 
 	b = clk_src == DSS_SRC_DSS1_ALWON_FCLK ? 0 : 1;
 
+	if (clk_src == DSS_SRC_DSI2_PLL_FCLK)
+		dsi_wait_dsi2_pll_active();
+
 	REG_FLD_MOD(DSS_CONTROL, b, 1, 1);	/* DSI_CLK_SWITCH */
 
 	dss.dsi_clk_source = clk_src;
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 786f433fd57..5c7940d5f28 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -199,7 +199,8 @@ int dss_init_overlay_managers(struct platform_device *pdev);
 void dss_uninit_overlay_managers(struct platform_device *pdev);
 int dss_mgr_wait_for_go_ovl(struct omap_overlay *ovl);
 void dss_setup_partial_planes(struct omap_dss_device *dssdev,
-				u16 *x, u16 *y, u16 *w, u16 *h);
+				u16 *x, u16 *y, u16 *w, u16 *h,
+				bool enlarge_update_area);
 void dss_start_update(struct omap_dss_device *dssdev);
 
 /* overlay */
@@ -281,6 +282,8 @@ void dsi_pll_uninit(void);
 void dsi_get_overlay_fifo_thresholds(enum omap_plane plane,
 		u32 fifo_size, enum omap_burst_size *burst_size,
 		u32 *fifo_low, u32 *fifo_high);
+void dsi_wait_dsi1_pll_active(void);
+void dsi_wait_dsi2_pll_active(void);
 #else
 static inline int dsi_init(struct platform_device *pdev)
 {
@@ -289,6 +292,12 @@ static inline int dsi_init(struct platform_device *pdev)
 static inline void dsi_exit(void)
 {
 }
+static inline void dsi_wait_dsi1_pll_active(void)
+{
+}
+static inline void dsi_wait_dsi2_pll_active(void)
+{
+}
 #endif
 
 /* DPI */
diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c
index 9e1fbe531bf..6a649ab5539 100644
--- a/drivers/video/omap2/dss/manager.c
+++ b/drivers/video/omap2/dss/manager.c
@@ -440,6 +440,10 @@ struct manager_cache_data {
 
 	/* manual update region */
 	u16 x, y, w, h;
+
+	/* enlarge the update area if the update area contains scaled
+	 * overlays */
+	bool enlarge_update_area;
 };
 
 static struct {
@@ -525,7 +529,7 @@ static int dss_mgr_wait_for_go(struct omap_overlay_manager *mgr)
 	int i;
 	struct omap_dss_device *dssdev = mgr->device;
 
-	if (!dssdev)
+	if (!dssdev || dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
 		return 0;
 
 	if (dssdev->type == OMAP_DISPLAY_TYPE_VENC) {
@@ -596,11 +600,14 @@ int dss_mgr_wait_for_go_ovl(struct omap_overlay *ovl)
 	int r;
 	int i;
 
-	if (!ovl->manager || !ovl->manager->device)
+	if (!ovl->manager)
 		return 0;
 
 	dssdev = ovl->manager->device;
 
+	if (!dssdev || dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
+		return 0;
+
 	if (dssdev->type == OMAP_DISPLAY_TYPE_VENC) {
 		irq = DISPC_IRQ_EVSYNC_ODD | DISPC_IRQ_EVSYNC_EVEN;
 		channel = OMAP_DSS_CHANNEL_DIGIT;
@@ -718,6 +725,7 @@ static int configure_overlay(enum omap_plane plane)
 	u16 x, y, w, h;
 	u32 paddr;
 	int r;
+	u16 orig_w, orig_h, orig_outw, orig_outh;
 
 	DSSDBGF("%d", plane);
 
@@ -738,8 +746,16 @@ static int configure_overlay(enum omap_plane plane)
 	outh = c->out_height == 0 ? c->height : c->out_height;
 	paddr = c->paddr;
 
+	orig_w = w;
+	orig_h = h;
+	orig_outw = outw;
+	orig_outh = outh;
+
 	if (c->manual_update && mc->do_manual_update) {
 		unsigned bpp;
+		unsigned scale_x_m = w, scale_x_d = outw;
+		unsigned scale_y_m = h, scale_y_d = outh;
+
 		/* If the overlay is outside the update region, disable it */
 		if (!rectangle_intersects(mc->x, mc->y, mc->w, mc->h,
 					x, y, outw, outh)) {
@@ -770,38 +786,47 @@ static int configure_overlay(enum omap_plane plane)
 			BUG();
 		}
 
-		if (dispc_is_overlay_scaled(c)) {
-			/* If the overlay is scaled, the update area has
-			 * already been enlarged to cover the whole overlay. We
-			 * only need to adjust x/y here */
-			x = c->pos_x - mc->x;
-			y = c->pos_y - mc->y;
+		if (mc->x > c->pos_x) {
+			x = 0;
+			outw -= (mc->x - c->pos_x);
+			paddr += (mc->x - c->pos_x) *
+				scale_x_m / scale_x_d * bpp / 8;
 		} else {
-			if (mc->x > c->pos_x) {
-				x = 0;
-				w -= (mc->x - c->pos_x);
-				paddr += (mc->x - c->pos_x) * bpp / 8;
-			} else {
-				x = c->pos_x - mc->x;
-			}
-
-			if (mc->y > c->pos_y) {
-				y = 0;
-				h -= (mc->y - c->pos_y);
-				paddr += (mc->y - c->pos_y) * c->screen_width *
-					bpp / 8;
-			} else {
-				y = c->pos_y - mc->y;
-			}
-
-			if (mc->w < (x+w))
-				w -= (x+w) - (mc->w);
+			x = c->pos_x - mc->x;
+		}
 
-			if (mc->h < (y+h))
-				h -= (y+h) - (mc->h);
+		if (mc->y > c->pos_y) {
+			y = 0;
+			outh -= (mc->y - c->pos_y);
+			paddr += (mc->y - c->pos_y) *
+				scale_y_m / scale_y_d *
+				c->screen_width * bpp / 8;
+		} else {
+			y = c->pos_y - mc->y;
+		}
 
-			outw = w;
-			outh = h;
+		if (mc->w < (x + outw))
+			outw -= (x + outw) - (mc->w);
+
+		if (mc->h < (y + outh))
+			outh -= (y + outh) - (mc->h);
+
+		w = w * outw / orig_outw;
+		h = h * outh / orig_outh;
+
+		/* YUV mode overlay's input width has to be even and the
+		 * algorithm above may adjust the width to be odd.
+		 *
+		 * Here we adjust the width if needed, preferring to increase
+		 * the width if the original width was bigger.
+		 */
+		if ((w & 1) &&
+				(c->color_mode == OMAP_DSS_COLOR_YUV2 ||
+				 c->color_mode == OMAP_DSS_COLOR_UYVY)) {
+			if (orig_w > w)
+				w += 1;
+			else
+				w -= 1;
 		}
 	}
 
@@ -960,7 +985,7 @@ static void make_even(u16 *x, u16 *w)
 /* Configure dispc for partial update. Return possibly modified update
  * area */
 void dss_setup_partial_planes(struct omap_dss_device *dssdev,
-		u16 *xi, u16 *yi, u16 *wi, u16 *hi)
+		u16 *xi, u16 *yi, u16 *wi, u16 *hi, bool enlarge_update_area)
 {
 	struct overlay_cache_data *oc;
 	struct manager_cache_data *mc;
@@ -969,6 +994,7 @@ void dss_setup_partial_planes(struct omap_dss_device *dssdev,
 	int i;
 	u16 x, y, w, h;
 	unsigned long flags;
+	bool area_changed;
 
 	x = *xi;
 	y = *yi;
@@ -989,73 +1015,91 @@ void dss_setup_partial_planes(struct omap_dss_device *dssdev,
 
 	spin_lock_irqsave(&dss_cache.lock, flags);
 
-	/* We need to show the whole overlay if it is scaled. So look for
-	 * those, and make the update area larger if found.
-	 * Also mark the overlay cache dirty */
-	for (i = 0; i < num_ovls; ++i) {
-		unsigned x1, y1, x2, y2;
-		unsigned outw, outh;
+	/*
+	 * Execute the outer loop until the inner loop has completed
+	 * once without increasing the update area. This will ensure that
+	 * all scaled overlays end up completely within the update area.
+	 */
+	do {
+		area_changed = false;
 
-		oc = &dss_cache.overlay_cache[i];
+		/* We need to show the whole overlay if it is scaled. So look
+		 * for those, and make the update area larger if found.
+		 * Also mark the overlay cache dirty */
+		for (i = 0; i < num_ovls; ++i) {
+			unsigned x1, y1, x2, y2;
+			unsigned outw, outh;
 
-		if (oc->channel != mgr->id)
-			continue;
+			oc = &dss_cache.overlay_cache[i];
 
-		oc->dirty = true;
+			if (oc->channel != mgr->id)
+				continue;
 
-		if (!oc->enabled)
-			continue;
+			oc->dirty = true;
 
-		if (!dispc_is_overlay_scaled(oc))
-			continue;
+			if (!enlarge_update_area)
+				continue;
 
-		outw = oc->out_width == 0 ? oc->width : oc->out_width;
-		outh = oc->out_height == 0 ? oc->height : oc->out_height;
+			if (!oc->enabled)
+				continue;
 
-		/* is the overlay outside the update region? */
-		if (!rectangle_intersects(x, y, w, h,
-					oc->pos_x, oc->pos_y,
-					outw, outh))
-			continue;
+			if (!dispc_is_overlay_scaled(oc))
+				continue;
 
-		/* if the overlay totally inside the update region? */
-		if (rectangle_subset(oc->pos_x, oc->pos_y, outw, outh,
-					x, y, w, h))
-			continue;
+			outw = oc->out_width == 0 ?
+				oc->width : oc->out_width;
+			outh = oc->out_height == 0 ?
+				oc->height : oc->out_height;
+
+			/* is the overlay outside the update region? */
+			if (!rectangle_intersects(x, y, w, h,
+						oc->pos_x, oc->pos_y,
+						outw, outh))
+				continue;
 
-		if (x > oc->pos_x)
-			x1 = oc->pos_x;
-		else
-			x1 = x;
+			/* if the overlay totally inside the update region? */
+			if (rectangle_subset(oc->pos_x, oc->pos_y, outw, outh,
+						x, y, w, h))
+				continue;
 
-		if (y > oc->pos_y)
-			y1 = oc->pos_y;
-		else
-			y1 = y;
+			if (x > oc->pos_x)
+				x1 = oc->pos_x;
+			else
+				x1 = x;
 
-		if ((x + w) < (oc->pos_x + outw))
-			x2 = oc->pos_x + outw;
-		else
-			x2 = x + w;
+			if (y > oc->pos_y)
+				y1 = oc->pos_y;
+			else
+				y1 = y;
 
-		if ((y + h) < (oc->pos_y + outh))
-			y2 = oc->pos_y + outh;
-		else
-			y2 = y + h;
+			if ((x + w) < (oc->pos_x + outw))
+				x2 = oc->pos_x + outw;
+			else
+				x2 = x + w;
 
-		x = x1;
-		y = y1;
-		w = x2 - x1;
-		h = y2 - y1;
+			if ((y + h) < (oc->pos_y + outh))
+				y2 = oc->pos_y + outh;
+			else
+				y2 = y + h;
 
-		make_even(&x, &w);
+			x = x1;
+			y = y1;
+			w = x2 - x1;
+			h = y2 - y1;
 
-		DSSDBG("changing upd area due to ovl(%d) scaling %d,%d %dx%d\n",
+			make_even(&x, &w);
+
+			DSSDBG("changing upd area due to ovl(%d) "
+			       "scaling %d,%d %dx%d\n",
 				i, x, y, w, h);
-	}
+
+			area_changed = true;
+		}
+	} while (area_changed);
 
 	mc = &dss_cache.manager_cache[mgr->id];
 	mc->do_manual_update = true;
+	mc->enlarge_update_area = enlarge_update_area;
 	mc->x = x;
 	mc->y = y;
 	mc->w = w;
diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/omap2/dss/overlay.c
index 82336583ade..244dca81a39 100644
--- a/drivers/video/omap2/dss/overlay.c
+++ b/drivers/video/omap2/dss/overlay.c
@@ -65,7 +65,7 @@ static ssize_t overlay_manager_store(struct omap_overlay *ovl, const char *buf,
 		for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) {
 			mgr = omap_dss_get_overlay_manager(i);
 
-			if (strncmp(buf, mgr->name, len) == 0)
+			if (sysfs_streq(buf, mgr->name))
 				break;
 
 			mgr = NULL;
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index cc23f53cc62..bbe62464e92 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -886,7 +886,7 @@ int omap_rfbi_prepare_update(struct omap_dss_device *dssdev,
 		return -EINVAL;
 
 	if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
-		dss_setup_partial_planes(dssdev, x, y, w, h);
+		dss_setup_partial_planes(dssdev, x, y, w, h, true);
 		dispc_set_lcd_size(*w, *h);
 	}
 
diff --git a/drivers/video/omap2/omapfb/omapfb-ioctl.c b/drivers/video/omap2/omapfb/omapfb-ioctl.c
index 9c7361871d7..6f435450987 100644
--- a/drivers/video/omap2/omapfb/omapfb-ioctl.c
+++ b/drivers/video/omap2/omapfb/omapfb-ioctl.c
@@ -34,12 +34,37 @@
 
 #include "omapfb.h"
 
+static u8 get_mem_idx(struct omapfb_info *ofbi)
+{
+	if (ofbi->id == ofbi->region->id)
+		return 0;
+
+	return OMAPFB_MEM_IDX_ENABLED | ofbi->region->id;
+}
+
+static struct omapfb2_mem_region *get_mem_region(struct omapfb_info *ofbi,
+						 u8 mem_idx)
+{
+	struct omapfb2_device *fbdev = ofbi->fbdev;
+
+	if (mem_idx & OMAPFB_MEM_IDX_ENABLED)
+		mem_idx &= OMAPFB_MEM_IDX_MASK;
+	else
+		mem_idx = ofbi->id;
+
+	if (mem_idx >= fbdev->num_fbs)
+		return NULL;
+
+	return &fbdev->regions[mem_idx];
+}
+
 static int omapfb_setup_plane(struct fb_info *fbi, struct omapfb_plane_info *pi)
 {
 	struct omapfb_info *ofbi = FB2OFB(fbi);
 	struct omapfb2_device *fbdev = ofbi->fbdev;
 	struct omap_overlay *ovl;
-	struct omap_overlay_info info;
+	struct omap_overlay_info old_info;
+	struct omapfb2_mem_region *old_rg, *new_rg;
 	int r = 0;
 
 	DBG("omapfb_setup_plane\n");
@@ -52,36 +77,106 @@ static int omapfb_setup_plane(struct fb_info *fbi, struct omapfb_plane_info *pi)
 	/* XXX uses only the first overlay */
 	ovl = ofbi->overlays[0];
 
-	if (pi->enabled && !ofbi->region.size) {
+	old_rg = ofbi->region;
+	new_rg = get_mem_region(ofbi, pi->mem_idx);
+	if (!new_rg) {
+		r = -EINVAL;
+		goto out;
+	}
+
+	/* Take the locks in a specific order to keep lockdep happy */
+	if (old_rg->id < new_rg->id) {
+		omapfb_get_mem_region(old_rg);
+		omapfb_get_mem_region(new_rg);
+	} else if (new_rg->id < old_rg->id) {
+		omapfb_get_mem_region(new_rg);
+		omapfb_get_mem_region(old_rg);
+	} else
+		omapfb_get_mem_region(old_rg);
+
+	if (pi->enabled && !new_rg->size) {
 		/*
 		 * This plane's memory was freed, can't enable it
 		 * until it's reallocated.
 		 */
 		r = -EINVAL;
-		goto out;
+		goto put_mem;
 	}
 
-	ovl->get_overlay_info(ovl, &info);
+	ovl->get_overlay_info(ovl, &old_info);
 
-	info.pos_x = pi->pos_x;
-	info.pos_y = pi->pos_y;
-	info.out_width = pi->out_width;
-	info.out_height = pi->out_height;
-	info.enabled = pi->enabled;
+	if (old_rg != new_rg) {
+		ofbi->region = new_rg;
+		set_fb_fix(fbi);
+	}
 
-	r = ovl->set_overlay_info(ovl, &info);
-	if (r)
-		goto out;
+	if (pi->enabled) {
+		struct omap_overlay_info info;
 
-	if (ovl->manager) {
-		r = ovl->manager->apply(ovl->manager);
+		r = omapfb_setup_overlay(fbi, ovl, pi->pos_x, pi->pos_y,
+			pi->out_width, pi->out_height);
 		if (r)
-			goto out;
+			goto undo;
+
+		ovl->get_overlay_info(ovl, &info);
+
+		if (!info.enabled) {
+			info.enabled = pi->enabled;
+			r = ovl->set_overlay_info(ovl, &info);
+			if (r)
+				goto undo;
+		}
+	} else {
+		struct omap_overlay_info info;
+
+		ovl->get_overlay_info(ovl, &info);
+
+		info.enabled = pi->enabled;
+		info.pos_x = pi->pos_x;
+		info.pos_y = pi->pos_y;
+		info.out_width = pi->out_width;
+		info.out_height = pi->out_height;
+
+		r = ovl->set_overlay_info(ovl, &info);
+		if (r)
+			goto undo;
 	}
 
-out:
-	if (r)
-		dev_err(fbdev->dev, "setup_plane failed\n");
+	if (ovl->manager)
+		ovl->manager->apply(ovl->manager);
+
+	/* Release the locks in a specific order to keep lockdep happy */
+	if (old_rg->id > new_rg->id) {
+		omapfb_put_mem_region(old_rg);
+		omapfb_put_mem_region(new_rg);
+	} else if (new_rg->id > old_rg->id) {
+		omapfb_put_mem_region(new_rg);
+		omapfb_put_mem_region(old_rg);
+	} else
+		omapfb_put_mem_region(old_rg);
+
+	return 0;
+
+ undo:
+	if (old_rg != new_rg) {
+		ofbi->region = old_rg;
+		set_fb_fix(fbi);
+	}
+
+	ovl->set_overlay_info(ovl, &old_info);
+ put_mem:
+	/* Release the locks in a specific order to keep lockdep happy */
+	if (old_rg->id > new_rg->id) {
+		omapfb_put_mem_region(old_rg);
+		omapfb_put_mem_region(new_rg);
+	} else if (new_rg->id > old_rg->id) {
+		omapfb_put_mem_region(new_rg);
+		omapfb_put_mem_region(old_rg);
+	} else
+		omapfb_put_mem_region(old_rg);
+ out:
+	dev_err(fbdev->dev, "setup_plane failed\n");
+
 	return r;
 }
 
@@ -92,8 +187,8 @@ static int omapfb_query_plane(struct fb_info *fbi, struct omapfb_plane_info *pi)
 	if (ofbi->num_overlays != 1) {
 		memset(pi, 0, sizeof(*pi));
 	} else {
-		struct omap_overlay_info *ovli;
 		struct omap_overlay *ovl;
+		struct omap_overlay_info *ovli;
 
 		ovl = ofbi->overlays[0];
 		ovli = &ovl->info;
@@ -103,6 +198,7 @@ static int omapfb_query_plane(struct fb_info *fbi, struct omapfb_plane_info *pi)
 		pi->enabled = ovli->enabled;
 		pi->channel_out = 0; /* xxx */
 		pi->mirror = 0;
+		pi->mem_idx = get_mem_idx(ofbi);
 		pi->out_width = ovli->out_width;
 		pi->out_height = ovli->out_height;
 	}
@@ -115,7 +211,7 @@ static int omapfb_setup_mem(struct fb_info *fbi, struct omapfb_mem_info *mi)
 	struct omapfb_info *ofbi = FB2OFB(fbi);
 	struct omapfb2_device *fbdev = ofbi->fbdev;
 	struct omapfb2_mem_region *rg;
-	int r, i;
+	int r = 0, i;
 	size_t size;
 
 	if (mi->type > OMAPFB_MEMTYPE_MAX)
@@ -123,22 +219,44 @@ static int omapfb_setup_mem(struct fb_info *fbi, struct omapfb_mem_info *mi)
 
 	size = PAGE_ALIGN(mi->size);
 
-	rg = &ofbi->region;
+	rg = ofbi->region;
 
-	for (i = 0; i < ofbi->num_overlays; i++) {
-		if (ofbi->overlays[i]->info.enabled)
-			return -EBUSY;
+	down_write_nested(&rg->lock, rg->id);
+	atomic_inc(&rg->lock_count);
+
+	if (atomic_read(&rg->map_count)) {
+		r = -EBUSY;
+		goto out;
+	}
+
+	for (i = 0; i < fbdev->num_fbs; i++) {
+		struct omapfb_info *ofbi2 = FB2OFB(fbdev->fbs[i]);
+		int j;
+
+		if (ofbi2->region != rg)
+			continue;
+
+		for (j = 0; j < ofbi2->num_overlays; j++) {
+			if (ofbi2->overlays[j]->info.enabled) {
+				r = -EBUSY;
+				goto out;
+			}
+		}
 	}
 
 	if (rg->size != size || rg->type != mi->type) {
 		r = omapfb_realloc_fbmem(fbi, size, mi->type);
 		if (r) {
 			dev_err(fbdev->dev, "realloc fbmem failed\n");
-			return r;
+			goto out;
 		}
 	}
 
-	return 0;
+ out:
+	atomic_dec(&rg->lock_count);
+	up_write(&rg->lock);
+
+	return r;
 }
 
 static int omapfb_query_mem(struct fb_info *fbi, struct omapfb_mem_info *mi)
@@ -146,12 +264,14 @@ static int omapfb_query_mem(struct fb_info *fbi, struct omapfb_mem_info *mi)
 	struct omapfb_info *ofbi = FB2OFB(fbi);
 	struct omapfb2_mem_region *rg;
 
-	rg = &ofbi->region;
+	rg = omapfb_get_mem_region(ofbi->region);
 	memset(mi, 0, sizeof(*mi));
 
 	mi->size = rg->size;
 	mi->type = rg->type;
 
+	omapfb_put_mem_region(rg);
+
 	return 0;
 }
 
@@ -490,6 +610,7 @@ int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg)
 		struct omapfb_vram_info		vram_info;
 		struct omapfb_tearsync_info	tearsync_info;
 		struct omapfb_display_info	display_info;
+		u32				crt;
 	} p;
 
 	int r = 0;
@@ -648,6 +769,17 @@ int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg)
 			r = -EFAULT;
 		break;
 
+	case FBIO_WAITFORVSYNC:
+		if (get_user(p.crt, (__u32 __user *)arg)) {
+			r = -EFAULT;
+			break;
+		}
+		if (p.crt != 0) {
+			r = -ENODEV;
+			break;
+		}
+		/* FALLTHROUGH */
+
 	case OMAPFB_WAITFORVSYNC:
 		DBG("ioctl WAITFORVSYNC\n");
 		if (!display) {
@@ -738,7 +870,7 @@ int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg)
 			break;
 		}
 
-		if (!display->driver->enable_te) {
+		if (!display || !display->driver->enable_te) {
 			r = -ENODEV;
 			break;
 		}
diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
index 4b4506da96d..04034d410d6 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/omap2/omapfb/omapfb-main.c
@@ -157,7 +157,7 @@ static void fill_fb(struct fb_info *fbi)
 
 static unsigned omapfb_get_vrfb_offset(const struct omapfb_info *ofbi, int rot)
 {
-	const struct vrfb *vrfb = &ofbi->region.vrfb;
+	const struct vrfb *vrfb = &ofbi->region->vrfb;
 	unsigned offset;
 
 	switch (rot) {
@@ -185,27 +185,27 @@ static unsigned omapfb_get_vrfb_offset(const struct omapfb_info *ofbi, int rot)
 static u32 omapfb_get_region_rot_paddr(const struct omapfb_info *ofbi, int rot)
 {
 	if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
-		return ofbi->region.vrfb.paddr[rot]
+		return ofbi->region->vrfb.paddr[rot]
 			+ omapfb_get_vrfb_offset(ofbi, rot);
 	} else {
-		return ofbi->region.paddr;
+		return ofbi->region->paddr;
 	}
 }
 
 static u32 omapfb_get_region_paddr(const struct omapfb_info *ofbi)
 {
 	if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB)
-		return ofbi->region.vrfb.paddr[0];
+		return ofbi->region->vrfb.paddr[0];
 	else
-		return ofbi->region.paddr;
+		return ofbi->region->paddr;
 }
 
 static void __iomem *omapfb_get_region_vaddr(const struct omapfb_info *ofbi)
 {
 	if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB)
-		return ofbi->region.vrfb.vaddr[0];
+		return ofbi->region->vrfb.vaddr[0];
 	else
-		return ofbi->region.vaddr;
+		return ofbi->region->vaddr;
 }
 
 static struct omapfb_colormode omapfb_colormodes[] = {
@@ -450,7 +450,7 @@ static int check_vrfb_fb_size(unsigned long region_size,
 static int check_fb_size(const struct omapfb_info *ofbi,
 		struct fb_var_screeninfo *var)
 {
-	unsigned long max_frame_size = ofbi->region.size;
+	unsigned long max_frame_size = ofbi->region->size;
 	int bytespp = var->bits_per_pixel >> 3;
 	unsigned long line_size = var->xres_virtual * bytespp;
 
@@ -497,7 +497,7 @@ static int check_fb_size(const struct omapfb_info *ofbi,
 static int setup_vrfb_rotation(struct fb_info *fbi)
 {
 	struct omapfb_info *ofbi = FB2OFB(fbi);
-	struct omapfb2_mem_region *rg = &ofbi->region;
+	struct omapfb2_mem_region *rg = ofbi->region;
 	struct vrfb *vrfb = &rg->vrfb;
 	struct fb_var_screeninfo *var = &fbi->var;
 	struct fb_fix_screeninfo *fix = &fbi->fix;
@@ -558,9 +558,9 @@ static int setup_vrfb_rotation(struct fb_info *fbi)
 		return r;
 
 	/* used by open/write in fbmem.c */
-	fbi->screen_base = ofbi->region.vrfb.vaddr[0];
+	fbi->screen_base = ofbi->region->vrfb.vaddr[0];
 
-	fix->smem_start = ofbi->region.vrfb.paddr[0];
+	fix->smem_start = ofbi->region->vrfb.paddr[0];
 
 	switch (var->nonstd) {
 	case OMAPFB_COLOR_YUV422:
@@ -599,7 +599,7 @@ void set_fb_fix(struct fb_info *fbi)
 	struct fb_fix_screeninfo *fix = &fbi->fix;
 	struct fb_var_screeninfo *var = &fbi->var;
 	struct omapfb_info *ofbi = FB2OFB(fbi);
-	struct omapfb2_mem_region *rg = &ofbi->region;
+	struct omapfb2_mem_region *rg = ofbi->region;
 
 	DBG("set_fb_fix\n");
 
@@ -668,8 +668,7 @@ int check_fb_var(struct fb_info *fbi, struct fb_var_screeninfo *var)
 
 	DBG("check_fb_var %d\n", ofbi->id);
 
-	if (ofbi->region.size == 0)
-		return 0;
+	WARN_ON(!atomic_read(&ofbi->region->lock_count));
 
 	r = fb_mode_to_dss_mode(var, &mode);
 	if (r) {
@@ -684,13 +683,14 @@ int check_fb_var(struct fb_info *fbi, struct fb_var_screeninfo *var)
 		}
 	}
 
-	if (var->rotate < 0 || var->rotate > 3)
+	if (var->rotate > 3)
 		return -EINVAL;
 
 	if (check_fb_res_bounds(var))
 		return -EINVAL;
 
-	if (check_fb_size(ofbi, var))
+	/* When no memory is allocated ignore the size check */
+	if (ofbi->region->size != 0 && check_fb_size(ofbi, var))
 		return -EINVAL;
 
 	if (var->xres + var->xoffset > var->xres_virtual)
@@ -822,9 +822,43 @@ static unsigned calc_rotation_offset_vrfb(const struct fb_var_screeninfo *var,
 	return offset;
 }
 
+static void omapfb_calc_addr(const struct omapfb_info *ofbi,
+			     const struct fb_var_screeninfo *var,
+			     const struct fb_fix_screeninfo *fix,
+			     int rotation, u32 *paddr, void __iomem **vaddr)
+{
+	u32 data_start_p;
+	void __iomem *data_start_v;
+	int offset;
+
+	if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
+		data_start_p = omapfb_get_region_rot_paddr(ofbi, rotation);
+		data_start_v = NULL;
+	} else {
+		data_start_p = omapfb_get_region_paddr(ofbi);
+		data_start_v = omapfb_get_region_vaddr(ofbi);
+	}
+
+	if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB)
+		offset = calc_rotation_offset_vrfb(var, fix, rotation);
+	else
+		offset = calc_rotation_offset_dma(var, fix, rotation);
+
+	data_start_p += offset;
+	data_start_v += offset;
+
+	if (offset)
+		DBG("offset %d, %d = %d\n",
+		    var->xoffset, var->yoffset, offset);
+
+	DBG("paddr %x, vaddr %p\n", data_start_p, data_start_v);
+
+	*paddr = data_start_p;
+	*vaddr = data_start_v;
+}
 
 /* setup overlay according to the fb */
-static int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl,
+int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl,
 		u16 posx, u16 posy, u16 outw, u16 outh)
 {
 	int r = 0;
@@ -832,9 +866,8 @@ static int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl,
 	struct fb_var_screeninfo *var = &fbi->var;
 	struct fb_fix_screeninfo *fix = &fbi->fix;
 	enum omap_color_mode mode = 0;
-	int offset;
-	u32 data_start_p;
-	void __iomem *data_start_v;
+	u32 data_start_p = 0;
+	void __iomem *data_start_v = NULL;
 	struct omap_overlay_info info;
 	int xres, yres;
 	int screen_width;
@@ -842,6 +875,8 @@ static int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl,
 	int rotation = var->rotate;
 	int i;
 
+	WARN_ON(!atomic_read(&ofbi->region->lock_count));
+
 	for (i = 0; i < ofbi->num_overlays; i++) {
 		if (ovl != ofbi->overlays[i])
 			continue;
@@ -861,28 +896,9 @@ static int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl,
 		yres = var->yres;
 	}
 
-
-	if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
-		data_start_p = omapfb_get_region_rot_paddr(ofbi, rotation);
-		data_start_v = NULL;
-	} else {
-		data_start_p = omapfb_get_region_paddr(ofbi);
-		data_start_v = omapfb_get_region_vaddr(ofbi);
-	}
-
-	if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB)
-		offset = calc_rotation_offset_vrfb(var, fix, rotation);
-	else
-		offset = calc_rotation_offset_dma(var, fix, rotation);
-
-	data_start_p += offset;
-	data_start_v += offset;
-
-	if (offset)
-		DBG("offset %d, %d = %d\n",
-				var->xoffset, var->yoffset, offset);
-
-	DBG("paddr %x, vaddr %p\n", data_start_p, data_start_v);
+	if (ofbi->region->size)
+		omapfb_calc_addr(ofbi, var, fix, rotation,
+				 &data_start_p, &data_start_v);
 
 	r = fb_mode_to_dss_mode(var, &mode);
 	if (r) {
@@ -954,12 +970,14 @@ int omapfb_apply_changes(struct fb_info *fbi, int init)
 		fill_fb(fbi);
 #endif
 
+	WARN_ON(!atomic_read(&ofbi->region->lock_count));
+
 	for (i = 0; i < ofbi->num_overlays; i++) {
 		ovl = ofbi->overlays[i];
 
 		DBG("apply_changes, fb %d, ovl %d\n", ofbi->id, ovl->id);
 
-		if (ofbi->region.size == 0) {
+		if (ofbi->region->size == 0) {
 			/* the fb is not available. disable the overlay */
 			omapfb_overlay_enable(ovl, 0);
 			if (!init && ovl->manager)
@@ -1007,36 +1025,48 @@ err:
  * DO NOT MODIFY PAR */
 static int omapfb_check_var(struct fb_var_screeninfo *var, struct fb_info *fbi)
 {
+	struct omapfb_info *ofbi = FB2OFB(fbi);
 	int r;
 
 	DBG("check_var(%d)\n", FB2OFB(fbi)->id);
 
+	omapfb_get_mem_region(ofbi->region);
+
 	r = check_fb_var(fbi, var);
 
+	omapfb_put_mem_region(ofbi->region);
+
 	return r;
 }
 
 /* set the video mode according to info->var */
 static int omapfb_set_par(struct fb_info *fbi)
 {
+	struct omapfb_info *ofbi = FB2OFB(fbi);
 	int r;
 
 	DBG("set_par(%d)\n", FB2OFB(fbi)->id);
 
+	omapfb_get_mem_region(ofbi->region);
+
 	set_fb_fix(fbi);
 
 	r = setup_vrfb_rotation(fbi);
 	if (r)
-		return r;
+		goto out;
 
 	r = omapfb_apply_changes(fbi, 0);
 
+ out:
+	omapfb_put_mem_region(ofbi->region);
+
 	return r;
 }
 
 static int omapfb_pan_display(struct fb_var_screeninfo *var,
 		struct fb_info *fbi)
 {
+	struct omapfb_info *ofbi = FB2OFB(fbi);
 	struct fb_var_screeninfo new_var;
 	int r;
 
@@ -1052,23 +1082,31 @@ static int omapfb_pan_display(struct fb_var_screeninfo *var,
 
 	fbi->var = new_var;
 
+	omapfb_get_mem_region(ofbi->region);
+
 	r = omapfb_apply_changes(fbi, 0);
 
+	omapfb_put_mem_region(ofbi->region);
+
 	return r;
 }
 
 static void mmap_user_open(struct vm_area_struct *vma)
 {
-	struct omapfb_info *ofbi = (struct omapfb_info *)vma->vm_private_data;
+	struct omapfb2_mem_region *rg = vma->vm_private_data;
 
-	atomic_inc(&ofbi->map_count);
+	omapfb_get_mem_region(rg);
+	atomic_inc(&rg->map_count);
+	omapfb_put_mem_region(rg);
 }
 
 static void mmap_user_close(struct vm_area_struct *vma)
 {
-	struct omapfb_info *ofbi = (struct omapfb_info *)vma->vm_private_data;
+	struct omapfb2_mem_region *rg = vma->vm_private_data;
 
-	atomic_dec(&ofbi->map_count);
+	omapfb_get_mem_region(rg);
+	atomic_dec(&rg->map_count);
+	omapfb_put_mem_region(rg);
 }
 
 static struct vm_operations_struct mmap_user_ops = {
@@ -1080,9 +1118,11 @@ static int omapfb_mmap(struct fb_info *fbi, struct vm_area_struct *vma)
 {
 	struct omapfb_info *ofbi = FB2OFB(fbi);
 	struct fb_fix_screeninfo *fix = &fbi->fix;
+	struct omapfb2_mem_region *rg;
 	unsigned long off;
 	unsigned long start;
 	u32 len;
+	int r = -EINVAL;
 
 	if (vma->vm_end - vma->vm_start == 0)
 		return 0;
@@ -1090,12 +1130,14 @@ static int omapfb_mmap(struct fb_info *fbi, struct vm_area_struct *vma)
 		return -EINVAL;
 	off = vma->vm_pgoff << PAGE_SHIFT;
 
+	rg = omapfb_get_mem_region(ofbi->region);
+
 	start = omapfb_get_region_paddr(ofbi);
 	len = fix->smem_len;
 	if (off >= len)
-		return -EINVAL;
+		goto error;
 	if ((vma->vm_end - vma->vm_start + off) > len)
-		return -EINVAL;
+		goto error;
 
 	off += start;
 
@@ -1105,13 +1147,25 @@ static int omapfb_mmap(struct fb_info *fbi, struct vm_area_struct *vma)
 	vma->vm_flags |= VM_IO | VM_RESERVED;
 	vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
 	vma->vm_ops = &mmap_user_ops;
-	vma->vm_private_data = ofbi;
+	vma->vm_private_data = rg;
 	if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
-			     vma->vm_end - vma->vm_start, vma->vm_page_prot))
-		return -EAGAIN;
+			       vma->vm_end - vma->vm_start,
+			       vma->vm_page_prot)) {
+		r = -EAGAIN;
+		goto error;
+	}
+
 	/* vm_ops.open won't be called for mmap itself. */
-	atomic_inc(&ofbi->map_count);
+	atomic_inc(&rg->map_count);
+
+	omapfb_put_mem_region(rg);
+
 	return 0;
+
+ error:
+	omapfb_put_mem_region(ofbi->region);
+
+	return r;
 }
 
 /* Store a single color palette entry into a pseudo palette or the hardware
@@ -1154,11 +1208,6 @@ static int _setcolreg(struct fb_info *fbi, u_int regno, u_int red, u_int green,
 		if (r != 0)
 			break;
 
-		if (regno < 0) {
-			r = -EINVAL;
-			break;
-		}
-
 		if (regno < 16) {
 			u16 pal;
 			pal = ((red >> (16 - var->red.length)) <<
@@ -1217,6 +1266,9 @@ static int omapfb_blank(int blank, struct fb_info *fbi)
 	int do_update = 0;
 	int r = 0;
 
+	if (!display)
+		return -EINVAL;
+
 	omapfb_lock(fbdev);
 
 	switch (blank) {
@@ -1300,7 +1352,9 @@ static void omapfb_free_fbmem(struct fb_info *fbi)
 	struct omapfb2_device *fbdev = ofbi->fbdev;
 	struct omapfb2_mem_region *rg;
 
-	rg = &ofbi->region;
+	rg = ofbi->region;
+
+	WARN_ON(atomic_read(&rg->map_count));
 
 	if (rg->paddr)
 		if (omap_vram_free(rg->paddr, rg->size))
@@ -1355,8 +1409,15 @@ static int omapfb_alloc_fbmem(struct fb_info *fbi, unsigned long size,
 	void __iomem *vaddr;
 	int r;
 
-	rg = &ofbi->region;
-	memset(rg, 0, sizeof(*rg));
+	rg = ofbi->region;
+
+	rg->paddr = 0;
+	rg->vaddr = NULL;
+	memset(&rg->vrfb, 0, sizeof rg->vrfb);
+	rg->size = 0;
+	rg->type = 0;
+	rg->alloc = false;
+	rg->map = false;
 
 	size = PAGE_ALIGN(size);
 
@@ -1609,7 +1670,7 @@ static int omapfb_allocate_all_fbs(struct omapfb2_device *fbdev)
 	for (i = 0; i < fbdev->num_fbs; i++) {
 		struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]);
 		struct omapfb2_mem_region *rg;
-		rg = &ofbi->region;
+		rg = ofbi->region;
 
 		DBG("region%d phys %08x virt %p size=%lu\n",
 				i,
@@ -1626,7 +1687,7 @@ int omapfb_realloc_fbmem(struct fb_info *fbi, unsigned long size, int type)
 	struct omapfb_info *ofbi = FB2OFB(fbi);
 	struct omapfb2_device *fbdev = ofbi->fbdev;
 	struct omap_dss_device *display = fb2display(fbi);
-	struct omapfb2_mem_region *rg = &ofbi->region;
+	struct omapfb2_mem_region *rg = ofbi->region;
 	unsigned long old_size = rg->size;
 	unsigned long old_paddr = rg->paddr;
 	int old_type = rg->type;
@@ -1709,7 +1770,7 @@ static int omapfb_fb_init(struct omapfb2_device *fbdev, struct fb_info *fbi)
 	fbi->flags = FBINFO_FLAG_DEFAULT;
 	fbi->pseudo_palette = fbdev->pseudo_palette;
 
-	if (ofbi->region.size == 0) {
+	if (ofbi->region->size == 0) {
 		clear_fb_info(fbi);
 		return 0;
 	}
@@ -1871,6 +1932,10 @@ static int omapfb_create_framebuffers(struct omapfb2_device *fbdev)
 		ofbi->fbdev = fbdev;
 		ofbi->id = i;
 
+		ofbi->region = &fbdev->regions[i];
+		ofbi->region->id = i;
+		init_rwsem(&ofbi->region->lock);
+
 		/* assign these early, so that fb alloc can use them */
 		ofbi->rotation_type = def_vrfb ? OMAP_DSS_ROT_VRFB :
 			OMAP_DSS_ROT_DMA;
@@ -1900,7 +1965,13 @@ static int omapfb_create_framebuffers(struct omapfb2_device *fbdev)
 
 	/* setup fb_infos */
 	for (i = 0; i < fbdev->num_fbs; i++) {
-		r = omapfb_fb_init(fbdev, fbdev->fbs[i]);
+		struct fb_info *fbi = fbdev->fbs[i];
+		struct omapfb_info *ofbi = FB2OFB(fbi);
+
+		omapfb_get_mem_region(ofbi->region);
+		r = omapfb_fb_init(fbdev, fbi);
+		omapfb_put_mem_region(ofbi->region);
+
 		if (r) {
 			dev_err(fbdev->dev, "failed to setup fb_info\n");
 			return r;
@@ -1921,20 +1992,19 @@ static int omapfb_create_framebuffers(struct omapfb2_device *fbdev)
 	DBG("framebuffers registered\n");
 
 	for (i = 0; i < fbdev->num_fbs; i++) {
-		r = omapfb_apply_changes(fbdev->fbs[i], 1);
+		struct fb_info *fbi = fbdev->fbs[i];
+		struct omapfb_info *ofbi = FB2OFB(fbi);
+
+		omapfb_get_mem_region(ofbi->region);
+		r = omapfb_apply_changes(fbi, 1);
+		omapfb_put_mem_region(ofbi->region);
+
 		if (r) {
 			dev_err(fbdev->dev, "failed to change mode\n");
 			return r;
 		}
 	}
 
-	DBG("create sysfs for fbs\n");
-	r = omapfb_create_sysfs(fbdev);
-	if (r) {
-		dev_err(fbdev->dev, "failed to create sysfs entries\n");
-		return r;
-	}
-
 	/* Enable fb0 */
 	if (fbdev->num_fbs > 0) {
 		struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[0]);
@@ -1968,11 +2038,11 @@ static int omapfb_mode_to_timings(const char *mode_str,
 #ifdef CONFIG_OMAP2_DSS_VENC
 	if (strcmp(mode_str, "pal") == 0) {
 		*timings = omap_dss_pal_timings;
-		*bpp = 0;
+		*bpp = 24;
 		return 0;
 	} else if (strcmp(mode_str, "ntsc") == 0) {
 		*timings = omap_dss_ntsc_timings;
-		*bpp = 0;
+		*bpp = 24;
 		return 0;
 	}
 #endif
@@ -2220,6 +2290,13 @@ static int omapfb_probe(struct platform_device *pdev)
 		}
 	}
 
+	DBG("create sysfs for fbs\n");
+	r = omapfb_create_sysfs(fbdev);
+	if (r) {
+		dev_err(fbdev->dev, "failed to create sysfs entries\n");
+		goto cleanup;
+	}
+
 	return 0;
 
 cleanup:
diff --git a/drivers/video/omap2/omapfb/omapfb-sysfs.c b/drivers/video/omap2/omapfb/omapfb-sysfs.c
index 5179219128b..6f9c72cd6bb 100644
--- a/drivers/video/omap2/omapfb/omapfb-sysfs.c
+++ b/drivers/video/omap2/omapfb/omapfb-sysfs.c
@@ -49,6 +49,7 @@ static ssize_t store_rotate_type(struct device *dev,
 {
 	struct fb_info *fbi = dev_get_drvdata(dev);
 	struct omapfb_info *ofbi = FB2OFB(fbi);
+	struct omapfb2_mem_region *rg;
 	enum omap_dss_rotation_type rot_type;
 	int r;
 
@@ -64,9 +65,11 @@ static ssize_t store_rotate_type(struct device *dev,
 	if (rot_type == ofbi->rotation_type)
 		goto out;
 
-	if (ofbi->region.size) {
+	rg = omapfb_get_mem_region(ofbi->region);
+
+	if (rg->size) {
 		r = -EBUSY;
-		goto out;
+		goto put_region;
 	}
 
 	ofbi->rotation_type = rot_type;
@@ -75,6 +78,8 @@ static ssize_t store_rotate_type(struct device *dev,
 	 * Since the VRAM for this FB is not allocated at the moment we don't
 	 * need to do any further parameter checking at this point.
 	 */
+put_region:
+	omapfb_put_mem_region(rg);
 out:
 	unlock_fb_info(fbi);
 
@@ -97,7 +102,7 @@ static ssize_t store_mirror(struct device *dev,
 {
 	struct fb_info *fbi = dev_get_drvdata(dev);
 	struct omapfb_info *ofbi = FB2OFB(fbi);
-	bool mirror;
+	unsigned long mirror;
 	int r;
 	struct fb_var_screeninfo new_var;
 
@@ -111,6 +116,8 @@ static ssize_t store_mirror(struct device *dev,
 
 	ofbi->mirror = mirror;
 
+	omapfb_get_mem_region(ofbi->region);
+
 	memcpy(&new_var, &fbi->var, sizeof(new_var));
 	r = check_fb_var(fbi, &new_var);
 	if (r)
@@ -125,6 +132,8 @@ static ssize_t store_mirror(struct device *dev,
 
 	r = count;
 out:
+	omapfb_put_mem_region(ofbi->region);
+
 	unlock_fb_info(fbi);
 
 	return r;
@@ -263,11 +272,15 @@ static ssize_t store_overlays(struct device *dev, struct device_attribute *attr,
 
 		DBG("detaching %d\n", ofbi->overlays[i]->id);
 
+		omapfb_get_mem_region(ofbi->region);
+
 		omapfb_overlay_enable(ovl, 0);
 
 		if (ovl->manager)
 			ovl->manager->apply(ovl->manager);
 
+		omapfb_put_mem_region(ofbi->region);
+
 		for (t = i + 1; t < ofbi->num_overlays; t++) {
 			ofbi->rotation[t-1] = ofbi->rotation[t];
 			ofbi->overlays[t-1] = ofbi->overlays[t];
@@ -300,7 +313,12 @@ static ssize_t store_overlays(struct device *dev, struct device_attribute *attr,
 	}
 
 	if (added) {
+		omapfb_get_mem_region(ofbi->region);
+
 		r = omapfb_apply_changes(fbi, 0);
+
+		omapfb_put_mem_region(ofbi->region);
+
 		if (r)
 			goto out;
 	}
@@ -388,7 +406,12 @@ static ssize_t store_overlays_rotate(struct device *dev,
 		for (i = 0; i < num_ovls; ++i)
 			ofbi->rotation[i] = rotation[i];
 
+		omapfb_get_mem_region(ofbi->region);
+
 		r = omapfb_apply_changes(fbi, 0);
+
+		omapfb_put_mem_region(ofbi->region);
+
 		if (r)
 			goto out;
 
@@ -408,7 +431,7 @@ static ssize_t show_size(struct device *dev,
 	struct fb_info *fbi = dev_get_drvdata(dev);
 	struct omapfb_info *ofbi = FB2OFB(fbi);
 
-	return snprintf(buf, PAGE_SIZE, "%lu\n", ofbi->region.size);
+	return snprintf(buf, PAGE_SIZE, "%lu\n", ofbi->region->size);
 }
 
 static ssize_t store_size(struct device *dev, struct device_attribute *attr,
@@ -416,6 +439,8 @@ static ssize_t store_size(struct device *dev, struct device_attribute *attr,
 {
 	struct fb_info *fbi = dev_get_drvdata(dev);
 	struct omapfb_info *ofbi = FB2OFB(fbi);
+	struct omapfb2_device *fbdev = ofbi->fbdev;
+	struct omapfb2_mem_region *rg;
 	unsigned long size;
 	int r;
 	int i;
@@ -425,15 +450,33 @@ static ssize_t store_size(struct device *dev, struct device_attribute *attr,
 	if (!lock_fb_info(fbi))
 		return -ENODEV;
 
-	for (i = 0; i < ofbi->num_overlays; i++) {
-		if (ofbi->overlays[i]->info.enabled) {
-			r = -EBUSY;
-			goto out;
+	rg = ofbi->region;
+
+	down_write_nested(&rg->lock, rg->id);
+	atomic_inc(&rg->lock_count);
+
+	if (atomic_read(&rg->map_count)) {
+		r = -EBUSY;
+		goto out;
+	}
+
+	for (i = 0; i < fbdev->num_fbs; i++) {
+		struct omapfb_info *ofbi2 = FB2OFB(fbdev->fbs[i]);
+		int j;
+
+		if (ofbi2->region != rg)
+			continue;
+
+		for (j = 0; j < ofbi2->num_overlays; j++) {
+			if (ofbi2->overlays[j]->info.enabled) {
+				r = -EBUSY;
+				goto out;
+			}
 		}
 	}
 
-	if (size != ofbi->region.size) {
-		r = omapfb_realloc_fbmem(fbi, size, ofbi->region.type);
+	if (size != ofbi->region->size) {
+		r = omapfb_realloc_fbmem(fbi, size, ofbi->region->type);
 		if (r) {
 			dev_err(dev, "realloc fbmem failed\n");
 			goto out;
@@ -442,6 +485,9 @@ static ssize_t store_size(struct device *dev, struct device_attribute *attr,
 
 	r = count;
 out:
+	atomic_dec(&rg->lock_count);
+	up_write(&rg->lock);
+
 	unlock_fb_info(fbi);
 
 	return r;
@@ -453,7 +499,7 @@ static ssize_t show_phys(struct device *dev,
 	struct fb_info *fbi = dev_get_drvdata(dev);
 	struct omapfb_info *ofbi = FB2OFB(fbi);
 
-	return snprintf(buf, PAGE_SIZE, "%0x\n", ofbi->region.paddr);
+	return snprintf(buf, PAGE_SIZE, "%0x\n", ofbi->region->paddr);
 }
 
 static ssize_t show_virt(struct device *dev,
@@ -462,7 +508,7 @@ static ssize_t show_virt(struct device *dev,
 	struct fb_info *fbi = dev_get_drvdata(dev);
 	struct omapfb_info *ofbi = FB2OFB(fbi);
 
-	return snprintf(buf, PAGE_SIZE, "%p\n", ofbi->region.vaddr);
+	return snprintf(buf, PAGE_SIZE, "%p\n", ofbi->region->vaddr);
 }
 
 static struct device_attribute omapfb_attrs[] = {
diff --git a/drivers/video/omap2/omapfb/omapfb.h b/drivers/video/omap2/omapfb/omapfb.h
index cd54fdbfd8b..1305fc9880b 100644
--- a/drivers/video/omap2/omapfb/omapfb.h
+++ b/drivers/video/omap2/omapfb/omapfb.h
@@ -27,6 +27,8 @@
 #define DEBUG
 #endif
 
+#include <linux/rwsem.h>
+
 #include <plat/display.h>
 
 #ifdef DEBUG
@@ -44,6 +46,7 @@ extern unsigned int omapfb_debug;
 #define OMAPFB_MAX_OVL_PER_FB 3
 
 struct omapfb2_mem_region {
+	int             id;
 	u32		paddr;
 	void __iomem	*vaddr;
 	struct vrfb	vrfb;
@@ -51,13 +54,15 @@ struct omapfb2_mem_region {
 	u8		type;		/* OMAPFB_PLANE_MEM_* */
 	bool		alloc;		/* allocated by the driver */
 	bool		map;		/* kernel mapped by the driver */
+	atomic_t	map_count;
+	struct rw_semaphore lock;
+	atomic_t	lock_count;
 };
 
 /* appended to fb_info */
 struct omapfb_info {
 	int id;
-	struct omapfb2_mem_region region;
-	atomic_t map_count;
+	struct omapfb2_mem_region *region;
 	int num_overlays;
 	struct omap_overlay *overlays[OMAPFB_MAX_OVL_PER_FB];
 	struct omapfb2_device *fbdev;
@@ -76,6 +81,7 @@ struct omapfb2_device {
 
 	unsigned num_fbs;
 	struct fb_info *fbs[10];
+	struct omapfb2_mem_region regions[10];
 
 	unsigned num_displays;
 	struct omap_dss_device *displays[10];
@@ -117,6 +123,9 @@ int omapfb_update_window(struct fb_info *fbi,
 int dss_mode_to_fb_mode(enum omap_color_mode dssmode,
 			struct fb_var_screeninfo *var);
 
+int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl,
+		u16 posx, u16 posy, u16 outw, u16 outh);
+
 /* find the display connected to this fb, if any */
 static inline struct omap_dss_device *fb2display(struct fb_info *fbi)
 {
@@ -148,8 +157,24 @@ static inline int omapfb_overlay_enable(struct omap_overlay *ovl,
 	struct omap_overlay_info info;
 
 	ovl->get_overlay_info(ovl, &info);
+	if (info.enabled == enable)
+		return 0;
 	info.enabled = enable;
 	return ovl->set_overlay_info(ovl, &info);
 }
 
+static inline struct omapfb2_mem_region *
+omapfb_get_mem_region(struct omapfb2_mem_region *rg)
+{
+	down_read_nested(&rg->lock, rg->id);
+	atomic_inc(&rg->lock_count);
+	return rg;
+}
+
+static inline void omapfb_put_mem_region(struct omapfb2_mem_region *rg)
+{
+	atomic_dec(&rg->lock_count);
+	up_read(&rg->lock);
+}
+
 #endif