summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)Author
2011-12-16Squashandroid-20111223Benn Pörscke
Change-Id: I2fcf46d1fc4b0cd4c61e5be3654c43b80db86015
2011-10-28NFS: Fix spurious readdir cookie loop messagesTrond Myklebust
commit 0c0308066ca53fdf1423895f3a42838b67b3a5a8 upstream. If the directory contents change, then we have to accept that the file->f_pos value may shrink if we do a 'search-by-cookie'. In that case, we should turn off the loop detection and let the NFS client try to recover. The patch also fixes a second loop detection bug by ensuring that after turning on the ctx->duped flag, we read at least one new cookie into ctx->dir_cookie before attempting to match with ctx->dup_cookie. Reported-by: Petr Vandrovec <petr@vandrovec.name> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Change-Id: Ibe4963eb5f9f34251713f1e5776d6b409e04616a Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/35658 Tested-by: Per VAHLNE <per.xx.vahlne@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2011-10-28mm/futex: fix futex writes on archs with SW tracking of dirty & youngBenjamin Herrenschmidt
commit 2efaca927f5cd7ecd0f1554b8f9b6a9a2c329c03 upstream. I haven't reproduced it myself but the fail scenario is that on such machines (notably ARM and some embedded powerpc), if you manage to hit that futex path on a writable page whose dirty bit has gone from the PTE, you'll livelock inside the kernel from what I can tell. It will go in a loop of trying the atomic access, failing, trying gup to "fix it up", getting succcess from gup, go back to the atomic access, failing again because dirty wasn't fixed etc... So I think you essentially hang in the kernel. The scenario is probably rare'ish because affected architecture are embedded and tend to not swap much (if at all) so we probably rarely hit the case where dirty is missing or young is missing, but I think Shan has a piece of SW that can reliably reproduce it using a shared writable mapping & fork or something like that. On archs who use SW tracking of dirty & young, a page without dirty is effectively mapped read-only and a page without young unaccessible in the PTE. Additionally, some architectures might lazily flush the TLB when relaxing write protection (by doing only a local flush), and expect a fault to invalidate the stale entry if it's still present on another processor. The futex code assumes that if the "in_atomic()" access -EFAULT's, it can "fix it up" by causing get_user_pages() which would then be equivalent to taking the fault. However that isn't the case. get_user_pages() will not call handle_mm_fault() in the case where the PTE seems to have the right permissions, regardless of the dirty and young state. It will eventually update those bits ... in the struct page, but not in the PTE. Additionally, it will not handle the lazy TLB flushing that can be required by some architectures in the fault case. Basically, gup is the wrong interface for the job. The patch provides a more appropriate one which boils down to just calling handle_mm_fault() since what we are trying to do is simulate a real page fault. The futex code currently attempts to write to user memory within a pagefault disabled section, and if that fails, tries to fix it up using get_user_pages(). This doesn't work on archs where the dirty and young bits are maintained by software, since they will gate access permission in the TLB, and will not be updated by gup(). In addition, there's an expectation on some archs that a spurious write fault triggers a local TLB flush, and that is missing from the picture as well. I decided that adding those "features" to gup() would be too much for this already too complex function, and instead added a new simpler fixup_user_fault() which is essentially a wrapper around handle_mm_fault() which the futex code can call. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix some nits Darren saw, fiddle comment layout] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reported-by: Shan Hai <haishan.bai@gmail.com> Tested-by: Shan Hai <haishan.bai@gmail.com> Cc: David Laight <David.Laight@ACULAB.COM> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Darren Hart <darren.hart@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Change-Id: I84219e4262cc051c141432cd60ac15809251e132 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/35645 Tested-by: Per VAHLNE <per.xx.vahlne@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2011-10-28pnfs: let layoutcommit handle a list of lsegPeng Tao
commit a9bae5666d0510ad69bdb437371c9a3e6b770705 upstream. There can be multiple lseg per file, so layoutcommit should be able to handle it. [Needed in v3.0] Signed-off-by: Peng Tao <peng_tao@emc.com> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Jim Rees <rees@umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Change-Id: I713a4a2a5eede21594125db9682a025a82142559 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/35632 Tested-by: Per VAHLNE <per.xx.vahlne@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2011-10-28firewire: cdev: prevent race between first get_info ioctl and bus reset ↵Stefan Richter
event queuing commit 93b37905f70083d6143f5f4dba0a45cc64379a62 upstream. Between open(2) of a /dev/fw* and the first FW_CDEV_IOC_GET_INFO ioctl(2) on it, the kernel already queues FW_CDEV_EVENT_BUS_RESET events to be read(2) by the client. The get_info ioctl is practically always issued right away after open, hence this condition only occurs if the client opens during a bus reset, especially during a rapid series of bus resets. The problem with this condition is twofold: - These bus reset events carry the (as yet undocumented) @closure value of 0. But it is not the kernel's place to choose closures; they are privat to the client. E.g., this 0 value forced from the kernel makes it unsafe for clients to dereference it as a pointer to a closure object without NULL pointer check. - It is impossible for clients to determine the relative order of bus reset events from get_info ioctl(2) versus those from read(2), except in one way: By comparison of closure values. Again, such a procedure imposes complexity on clients and reduces freedom in use of the bus reset closure. So, change the ABI to suppress queuing of bus reset events before the first FW_CDEV_IOC_GET_INFO ioctl was issued by the client. Note, this ABI change cannot be version-controlled. The kernel cannot distinguish old from new clients before the first FW_CDEV_IOC_GET_INFO ioctl. We will try to back-merge this change into currently maintained stable/ longterm series, and we only document the new behaviour. The old behavior is now considered a kernel bug, which it basically is. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: <stable@kernel.org> Change-Id: I790e269d95885c36b492d735bf457d4c2b103387 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/35609 Tested-by: Per VAHLNE <per.xx.vahlne@stericsson.com> Reviewed-by: QABUILD Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2011-10-28gro: Only reset frag0 when skb can be pulledHerbert Xu
commit 17dd759c67f21e34f2156abcf415e1f60605a188 upstream. Currently skb_gro_header_slow unconditionally resets frag0 and frag0_len. However, when we can't pull on the skb this leaves the GRO fields in an inconsistent state. This patch fixes this by only resetting those fields after the pskb_may_pull test. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Change-Id: Ib97b8d7f52c19c34283adf2382403c9bf9dac9f0 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/35584 Tested-by: Per VAHLNE <per.xx.vahlne@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2011-10-28u8500 : USB :New notification events for BatManrajaram
Added notification events for ACA cases so that battery manager can distinguish between Standard Host and ACA charger. ST-Ericsson Linux next: NA ST-Ericsson ID: 362951 ST-Ericsson FOSS-OUT ID: Trivial Signed-off-by: rajaram <rajaram.ragupathy@stericsson.com> Signed-off-by: Sakethram Bommisetti <sakethram.bommisetti@stericsson.com> Change-Id: I02a19bced97b408990d8effb785418bf182ac27b Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34862 Tested-by: Rajaram REGUPATHY <ragupathy.rajaram@stericsson.com> Reviewed-by: Praveena NADAHALLY <praveen.nadahally@stericsson.com> Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
2011-10-28u5500: add MTIMER clocksourceRabin Vincent
ST-Ericsson ID: 368260 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Depends-On: I5307cb7f58fdf890896d641a8e4f49098a90b68e Change-Id: I9ef4ff1c63f6ec9293ece4013f13cf3caa707d9d Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34307 Reviewed-by: QATOOLS Reviewed-by: QABUILD
2011-10-27PM / Runtime: Add new helper function: pm_runtime_status_suspended()Kevin Hilman
This boolean function simply returns whether or not the runtime status of the device is 'suspended'. Unlike pm_runtime_suspended(), this function returns the runtime status whether or not runtime PM for the device has been disabled or not. Also add entry to Documentation/power/runtime.txt Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Change-Id: I2e31841f087b5d44a0f4d6e2f8bba2d08cfc7b64 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/35338 Reviewed-by: QABUILD Reviewed-by: Linus WALLEIJ <linus.walleij@stericsson.com> Tested-by: Ulf HANSSON <ulf.hansson@stericsson.com>
2011-10-27PM: Introduce generic "noirq" callback routines for subsystems (v2)Rafael J. Wysocki
Introduce generic "noirq" power management callback routines for subsystems in addition to the "regular" generic PM callback routines. The new routines will be used, among other things, for implementing system-wide PM transitions support for generic PM domains. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Change-Id: I345a1c6d221b402f349837581681bc7b5c464ea9 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/35335 Reviewed-by: QABUILD Reviewed-by: Linus WALLEIJ <linus.walleij@stericsson.com> Tested-by: Ulf HANSSON <ulf.hansson@stericsson.com>
2011-10-27header files: install STE multimedia headersThierry STRUDEL
Installs STE multimedia header files to allow building the STE Ux5xx STELP. ST-Ericsson Linux next: NA ST-Ericsson ID: 322357 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I07829a94862f6178e4c291a7dd9371ed146858d3 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34893 Reviewed-by: Thierry STRUDEL <thierry.strudel@stericsson.com> Tested-by: Thierry STRUDEL <thierry.strudel@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2011-10-19mfd: add plldsi and dsi{0,1}clkMattias Nilsson
This patch adds PRCMU driver functions for controlling the PLLDSI and the two subclocks dsi{0,1}clk. ST Ericsson ID: 343004, 359227 ST Ericsson FOSS-OUT ID: trivial Change-Id: I6092e76cd03b934744cb9bb5fef3b043a558771d Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34371 Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2011-10-19mfd: add u8500 dsiescclk:sMattias Nilsson
This patch adds the PRCMU driver support for the DSI Escape clocks for U8500. ST Ericsson ID: 343004, 359227 ST Ericsson FOSS-OUT ID: trivial Change-Id: I585efecef79240c99a720fad4994ae1541463f33 Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32965 Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2011-10-19ARM: u8500: API for PRCMU_GPIOCR registerJurijs Soloveckis
The PRCMU_GPIOCR register modification within STM driver is implemented via corresponding API functions. ST-Ericsson ID: 349677 ST-Ericsson Linux next: N/A ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I7bbcf263b83338d7b05413dd9dc0ac2ec4880601 Depends-On: I5d3d0e069b0e8929b99fcfe9cb5e37a950caf716 Signed-off-by: Jurijs Soloveckis <jurijs.soloveckis@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33429 Reviewed-by: QATOOLS Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2011-10-19arm: ux500: Removing U8400 legacyDaniel Willerud
Removing U8400 legacy from PRCMU and cpufreq drivers ST-Ericsson ID: 364381 ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson Linux next: NA Depends-On: Idcc4acd8ed9a319a52cfaa6c603e346cae965148 Depends-On: Id4f13fece9ad0769ae77366e62e3bad86d718b3a Change-Id: I694b5c08df05f3f09b188730141d0487b404bd45 Signed-off-by: Daniel Willerud <daniel.willerud@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33910 Reviewed-by: Mattias NILSSON <mattias.i.nilsson@stericsson.com> Reviewed-by: QATOOLS Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2011-10-18clocksource: fixup ux500 build problemsLinus Walleij
Based on a patch from Arnd Bergmann this fixes up the build problem of assigning a non-existing global when the ux500 PRCMU timer is not linked in by passing its base address to the init function. We also add a missing <linux/errno.h> inclusion and staticize the dummy function. Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> ST-Ericsson ID: 368260 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I87ec2eb27e157433fa12fb4eafc165a6217a869b Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34327 Reviewed-by: QATOOLS Tested-by: Rabin VINCENT <rabin.vincent@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2011-10-18u8500: Configure SysClkReqRfClkBufKennet Wallden
Added the possibility to configure SysCl1kReqRfClkBuf - SysClk8ReqRfClkBuf ST-Ericsson ID: 360052 ST-Ericsson Linux next: N/A ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I7813ae4a73701d874e39556c60608ff66e1d016d Signed-off-by: Kennet Wallden <kennet.wallden@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32261 Reviewed-by: Karl-Johan PERNTZ <karl-johan.perntz@stericsson.com> Reviewed-by: Bengt JONSSON <bengt.g.jonsson@stericsson.com>
2011-10-17mmc: boot part lock should lock all boot partsJohan Rudholm
Locking a boot partition read only should automatically make the other boot partition read only as well. Also, the sysfs parent to the boot partitions should have the boot_partition_ro_lock file, since an ro lock applies to both partitions. ST-Ericsson ID: 344197 ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson Linux next: NA Change-Id: I3762e840ab1d393420352521f013c5715f8188a1 Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34249 Reviewed-by: John BECKETT <john.beckett@stericsson.com> Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com>
2011-10-14mmc: boot partition lock supportJohan Rudholm
Enable boot partitions to be power and permanently locked via a sysfs ro_lock node. ST-Ericsson ID: 344197 ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson Linux next: NA Change-Id: I5534c12b0c1867d562e27a2fb2012624ad3009b4 Signed-off-by: John Beckett <john.beckett@stericsson.com> Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33117 Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com>
2011-10-14u8500-shrm: Initiate MSR in case of serious bugArun Murthy
During APE-Modem communication, for some reasson if software or hardware fails, instead of calling kernel function BUG() and halting the system making it no more useful until reboot, initiate a MSR. ST-Ericsson Linux next: NA ST-Ericsson ID: 366150 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I59e93b338c3242b506be7775487be065421022b8 Signed-off-by: Arun Murthy <arun.murthy@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33416 Reviewed-by: Bibek BASU <bibek.basu@stericsson.com> Reviewed-by: QABUILD Reviewed-by: Magnus TEMPLING <magnus.templing@stericsson.com> Reviewed-by: Rickard EVERTSSON <rickard.evertsson@stericsson.com> Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2011-10-11mmc: core: Add default timeout value for CMD6Seungwon Jeon
EXT_CSD[248] includes the default maximum timeout for CMD6. This field is added at eMMC4.5 Spec. And it can be used for default timeout except for some operations which don't define the timeout (i.e. background operation, sanitize, flush cache) in eMMC4.5 Spec. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org> Change-Id: I1761bbadb1d35d58c5de3f459808f4cd2559da99 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33717 Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com> Tested-by: Ulf HANSSON <ulf.hansson@stericsson.com>
2011-10-11regulators: ab8500: Add support of low voltage batteryBengt Jonsson
Low voltage batteries have a wider voltage range with lower operating voltages. Some consumers in the platform may not work with the lower voltages and therefore need an extra regulator to boost the voltage in this case. This driver adds support for checking the consumers that need higher voltage (Vaux1, 2 and 3 regulators, 3 V SIM) and control the external buck/boost regulator accordingly. Note that to utilize the low voltage battery support, the battery voltage thresholds must be changed. This applies for the low battery voltage threshold of the battery manager and the OTP setting for the AB8500 BattOk levels. ST-Ericsson ID: 282517, 363432 ST-Ericsson Linux next: - ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ife07a622ec9748c027dbbd78b01e4ee7e92629ec Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33616 Reviewed-by: QABUILD
2011-10-11ab8500: Separate regulator and MFD platform dataBengt Jonsson
The ab8500 MFD should not have knowledge about regulator- specific platform data like number of regulators and regulator registers. As the regulator platform data is about to grow with external regulators, this information is moved to a new structure provided by the regulator driver. ST-Ericsson ID: 282517 ST-Ericsson Linux next: - ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I77d03ffcc3273b0659dea3cffd8191b8c94b83d2 Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33615 Reviewed-by: QABUILD Reviewed-by: Yvan FILLION <yvan.fillion@stericsson.com>
2011-10-11mmc: core: general purpose MMC partition support.Namjae Jeon
It allows gerneral purpose partitions in MMC Device. And I try to simply make mmc_blk_alloc_parts using mmc_part structure suggested by Andrei Warkentin. After patching, we see general purpose partitions like this: > cat /proc/partitions 179 0 847872 mmcblk0 179 192 4096 mmcblk0gp3 179 160 4096 mmcblk0gp2 179 128 4096 mmcblk0gp1 179 96 1052672 mmcblk0gp0 179 64 1024 mmcblk0boot1 179 32 1024 mmcblk0boot0 Signed-off-by: Namjae Jeon <linkinjeon@gmail.com> Acked-by: Andrei Warkentin <awarkentin@vmware.com> Signed-off-by: Chris Ball <cjb@laptop.org> Change-Id: I245c7e970a99fb17d0d9aedccc52973d74f43f51 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33702 Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com> Tested-by: Ulf HANSSON <ulf.hansson@stericsson.com>
2011-10-11mmc: block: support no access to boot partitionsAdrian Hunter
Intel Medfield platform blocks access to eMMC boot partitions which results in switch errors. Since there is no access, mmcboot0/1 devices should not be created. Add a host capability to reflect that. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org> Change-Id: Idd40bbd8f8809afcabb385c2492680ff8182877e Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33630 Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com> Tested-by: Ulf HANSSON <ulf.hansson@stericsson.com>
2011-10-11mmc: core: eMMC 4.5 Power Class Selection FeatureGirish K S
This patch adds the power class selection feature available for mmc versions 4.0 and above. During the enumeration stage before switching to the lower data bus, check if the power class is supported for the current bus width. If the power class is available then switch to the power class and use the higher data bus. If power class is not supported then switch to the lower data bus in a worst case. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org> Change-Id: I2248d2e770fbd349e68e21b2cbde36ee16ad8a6f Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33628 Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com> Tested-by: Ulf HANSSON <ulf.hansson@stericsson.com>
2011-10-10mmc: core: add eMMC hardware reset supportAdrian Hunter
eMMC's may have a hardware reset line. This patch provides a host controller operation to implement hardware reset and a function to reset and reinitialize the card. Also, for MMC, the reset is always performed before initialization. The host must set the new host capability MMC_CAP_HW_RESET to enable hardware reset. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org> Change-Id: I324ad5b70ce1093cef1bccead045a2539be4cbfc Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33452 Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com> Tested-by: Ulf HANSSON <ulf.hansson@stericsson.com>
2011-10-10mmc: core: clarify how to use post_req in case of errorsPer Forlin
The err condition in post_req() is set to undo a call made to pre_req() that hasn't been started yet. The err condition is not set if an MMC request returns an error. Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org> Change-Id: Ie91c9868301c654ae27937b666089d82017b75f2 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33433 Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com> Tested-by: Ulf HANSSON <ulf.hansson@stericsson.com>
2011-10-10mmc: core: add random fault injectionPer Forlin
This adds support to inject data errors after a completed host transfer. The mmc core will return error even though the host transfer is successful. This simple fault injection proved to be very useful to test the non-blocking error handling in the mmc_blk_issue_rw_rq(). Random faults can also test how the host driver handles pre_req() and post_req() in case of errors. Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org> Change-Id: Id26447a00f055c7cde48ff941188f18bf8eb9cad Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33379 Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com> Tested-by: Ulf HANSSON <ulf.hansson@stericsson.com>
2011-10-10mmc: remove unused "ddr" parameter in struct mmc_iosJaehoon Chung
"mmc: dw_mmc: Fix DDR mode support" removed the last user. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org> Change-Id: I50f9786c41931e8031865d282ab2ac0ca346fff3 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33374 Tested-by: Ulf HANSSON <ulf.hansson@stericsson.com> Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com>
2011-10-10ux500: camera_flash: add platform data for adp1653Rajat Verma
board specific information such as enable_gpio and interrupt line information should be obtained using platform_data and not hardcoded inside the driver itself. ST-Ericsson Linux next: NA ST-Ericsson ID: 361940 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I73a0f3e986bd3cbf19a0797190d514af9b84e3df Signed-off-by: Rajat Verma <rajat.verma@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33282 Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
2011-10-03U5500: PRCMU MBOX4 support for Hotdog and hotmonVijaya Kumar Kilari
PRCMU driver interface for thermal management of DB5500. MBOX4 supports to - configure hotmon period - configure hotdog ranges - read current temperature ST-Ericsson Linux next: - ST-Ericsson ID: 334775 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: If25acd1d500800053bd6c511a64c9e5726c69647 Signed-off-by: Vijaya Kumar Kilari <vijay.kilari@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/28334 Reviewed-by: QABUILD Reviewed-by: QATEST Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32788 Tested-by: Venkata Biswanath DEVARASETTY <venkata.biswanath@stericsson.com> Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
2011-10-03u5500: leds: add ab5500v2 HVLED blink featureShreshtha Kumar Sahu
This patch adds support for AB5500 v2.0 HVLED hardware blink feature in existing driver. ST-Ericsson Linux next: ER 336280 ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson ID: ER 364964 Change-Id:I73e1caeac14774b7d3e03d1e7c5e4bd16fc7d06a Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/27547 Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32746 Reviewed-by: Naga RADHESH Y <naga.radheshy@stericsson.com> Tested-by: Naga RADHESH Y <naga.radheshy@stericsson.com>
2011-10-03ux500: Start crash dump through SW resetPer Fransson
When using kexec/kdump without an crash kernel image loaded: * clean the caches and write the crash_notes * perform a restart ST-Ericsson ID: 340331 Change-Id: I1ae34ed2b5e43da4849650a8a7d2f1e453dcbe93 Signed-off-by: Per Fransson <per.xx.fransson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32678 Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2011-09-30u5500: prcmu: implement DDR OPP handlingRabin Vincent
ST-Ericsson ID: 348762 ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson Linux next: NA Change-Id: I26770ee6151f91c70eebba1c1c460e7cdedd43e1 Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/30502 Reviewed-by: QATOOLS Reviewed-by: QABUILD Reviewed-by: Vijaya Kumar K-1 <vijay.kilari@stericsson.com> Reviewed-by: Mattias NILSSON <mattias.i.nilsson@stericsson.com> Reviewed-by: QATEST Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32601 Tested-by: Venkata Biswanath DEVARASETTY <venkata.biswanath@stericsson.com>
2011-09-30u5500: prcmu: implement APE OPP handlingShreshtha Kumar Sahu
ST-Ericsson ID: 348762 ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson Linux next: NA Change-Id: I7ff9a02de960f251cbbd9f051a1c8050aa340d6d Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/28000 Reviewed-by: QATOOLS Reviewed-by: QABUILD Reviewed-by: QATEST Reviewed-by: Vijaya Kumar K-1 <vijay.kilari@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32555 Tested-by: Venkata Biswanath DEVARASETTY <venkata.biswanath@stericsson.com>
2011-09-29dbx500-prcmu: use cpu_is() instead of machine_is()Rabin Vincent
cpu_is_u5500() is what is really meant here, since machine_is_u5500() will return false on U5500-based boards which use a different mach type. Change-Id: I50c4512d7a070ee8203a307a9b87da492763aff6 Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32524 Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2011-09-29gpio: nomadik: support low EMI modeRabin Vincent
ST-Ericsson ID: 345488 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I88f6c92f199e52186acf6899e14ed399aba657ac Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32354 Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2011-09-29u5500: prcmu: add missing Clock related stubsVenkata Biswanath
Change-Id: I66b0129162baf5d98763c744680ae2f917685dee Signed-off-by: Venkata Biswanath <venkata.biswanath@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32450 Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Tested-by: Jonas ABERG <jonas.aberg@stericsson.com>
2011-09-29dbx500-prcmu: remove stray characterRabin Vincent
Change-Id: If1c55ad68d8acbaf871447120add44a4500f03c6 Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32444 Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Tested-by: Jonas ABERG <jonas.aberg@stericsson.com>
2011-09-29ARM: U5500: PRCMU CLKOUTx configuration APIPawel Szyszuk
U5500 API for setting the programmable CLKOUTx source and divisor. New API used for setting the sources of camera clocks. ST-Ericsson ID: - ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I6d19543f5260af8c9dd4838538848644b3d34f81 Signed-off-by: Pawel Szyszuk <pawel.szyszuk@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/25701 Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32443 Tested-by: Jonas ABERG <jonas.aberg@stericsson.com>
2011-09-29U5500: Add MSP1 and Cable detect clock supportVijaya Kumar Kilari
MSP1 and CD clocks are managed by PRCMU FW so special handling for these clocks are required ST-Ericsson Linux next: - ST-Ericsson ID: 332193 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I5a774b540089bd79285d7086ce1291e30d311fd7 Signed-off-by: Vijaya Kumar Kilari <vijay.kilari@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/28013 Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32442 Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Tested-by: Jonas ABERG <jonas.aberg@stericsson.com>
2011-09-29u5500: handle SDMMC0 clock change on DB5500v2Rabin Vincent
On DB5500v2, SDMMC0 is parented to SPARE1CLK instead of SDMMCCLK. Also, correct the PRCM_IRDACLK_MGT register address which is wrong even for v1. ST-Ericsson Linux next: - ST-Ericsson ID: 349062 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I7b9fda3af42a5cdf4804e721cd8030344b2ea894 Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/25979 Reviewed-by: QATEST Reviewed-by: Vijaya Kumar K-1 <vijay.kilari@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32441 Tested-by: Jonas ABERG <jonas.aberg@stericsson.com>
2011-09-29gpio: ab8500: use gpio base number defined for the platformMian Yousaf Kaukab
Change-Id: I84da2cbc3a482d0c54ec489874fc040d8c79eda8 Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32347 Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Tested-by: Jonas ABERG <jonas.aberg@stericsson.com>
2011-09-29arm: ux500: implement clk_set_rate for some multimedia clocksMattias Nilsson
This patch implements clk_set_rate (and clk_round_rate) for lcdclk, tvclk, and hdmiclk, as well as some infrastructure needed by this and coming changes. ST Ericsson ID: 343004, 359227 ST Ericsson FOSS-OUT ID: trivial ST Ericsson Linux next: - Change-Id: I8eddef534724cd11aaad4a867d217f5df31a5302 Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/30913 Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32139 Tested-by: Jonas ABERG <jonas.aberg@stericsson.com>
2011-09-29u8500: change clk_get_rate for prcmu clocksMattias Nilsson
This patch changes the implementation of clk_get_rate for PRCMU clocks, so that it returns a rate according to the hardware settings instead of a hardcoded value. ST Ericsson ID: 343004, 359227 ST Ericsson FOSS-OUT ID: trivial ST Ericsson Linux next: - Change-Id: I9a4ff57884017dd22774553c5bcabbb0756a604f Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32138 Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Tested-by: Jonas ABERG <jonas.aberg@stericsson.com>
2011-09-29ux500: regulator: add debugging support for dbx500 regulatorsMian Yousaf Kaukab
ST-Ericsson ID: 360515 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I71dbb5bc63e08998486a7c3a699a4d90da59df4e Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32137 Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Tested-by: Jonas ABERG <jonas.aberg@stericsson.com>
2011-09-29ux500: Move atomic regulator header fileJonas Aaberg
Atomic regulators should be placed in a regulator include file, not in mfd. Change-Id: I5fecdfd4f0aaed48b30b119cd22ab13a8b740417 Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32136
2011-09-29arm: ux500: halve the frequencies of some clocks in vc use caseMattias Nilsson
This patch adds a new APE OPP (50% with ACLK and DMACLK frequencies at 25%) which is used during the voice call use case. ST Ericsson ID: 337715, 337718 ST Ericsson FOSS-OUT ID: trivial Change-Id: I14c0bb69aa2e4086d834902f4f961ba2d8c87f66 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32129 Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Tested-by: Jonas ABERG <jonas.aberg@stericsson.com>
2011-09-29regulator: ab8500: add debugging supportMian Yousaf Kaukab
Change-Id: I9b332d36c712459b9444bf3b4c8ce450a2041bdd Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32116 Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Tested-by: Jonas ABERG <jonas.aberg@stericsson.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-07 14:24:35 +0000