Revert merge of git://www.denx.de/git/u-boot-arm, commit 62479b18:

Reverting became necessary after it turned out that the patches in
the u-boot-arm repo were modified, and in some cases corrupted.

This reverts the following commits:

	066bebd6353e33af3adefc3404560871699e9961
	7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6
	c88ae20580b2b01487b4cdcc8b2a113f551aee36
	a147e56f03871bba4f05058d5e04ce7deb010b04
	d6674e0e2a6a1f033945f78838566210d3f28c95
	8c8463cce44d849e37744749b32d38e1dfb12e50
	c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d
	8bf69d81782619187933a605f1a95ee1d069478d
	8c16cb0d3b971f46fbe77c072664c0f2dcd4471d
	a574a73852a527779234e73e17e7597fd8128882
	1377b5583a48021d983e1fd565f7d40c89e84d63
	1704dc20917b4f71e373e2c888497ee666d40380

Signed-off-by: Wolfgang Denk <wd@denx.de>

58 files changed, 199 insertions, 4013 deletions

diff --git a/MAKEALL b/MAKEALL
index 2a872acd6..fbde7344a 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -490,7 +490,6 @@ LIST_ARM9="			\
 	davinci_dvevm		\
 	davinci_schmoogie	\
 	davinci_sonata		\
-	pmdra			\
 "
 
 #########################################################################
@@ -508,9 +507,6 @@ LIST_ARM11="		\
 	cp1136		\
 	omap2420h4	\
 	apollon		\
-	imx31_litekit	\
-	imx31_phycore	\
-	mx31ads		\
 "
 
 #########################################################################
diff --git a/Makefile b/Makefile
index a7f886b48..e5b421077 100644
--- a/Makefile
+++ b/Makefile
@@ -2385,9 +2385,6 @@ davinci_schmoogie_config :	unconfig
 davinci_sonata_config :	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci
 
-pmdra_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm926ejs pmdra prodrive davinci
-
 omap1610inn_config \
 omap1610inn_cs0boot_config \
 omap1610inn_cs3boot_config \
@@ -2598,23 +2595,14 @@ zylonite_config :
 ## ARM1136 Systems
 #########################################################################
 omap2420h4_config	: unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx
+	@$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4
 
 apollon_config		: unconfig
 	@mkdir -p $(obj)include
 	@echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h
-	@$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx
+	@$(MKCONFIG) $(@:_config=) arm arm1136 apollon
 	@echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk
 
-imx31_litekit_config	: unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit NULL mx31
-
-imx31_phycore_config	: unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm1136 imx31_phycore NULL mx31
-
-mx31ads_config		: unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads NULL mx31
-
 #========================================================================
 # i386
 #========================================================================
diff --git a/board/imx31_litekit/Makefile b/board/imx31_litekit/Makefile
deleted file mode 100644
index aaaec69d6..000000000
--- a/board/imx31_litekit/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2000-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundatio; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= imx31_litekit.o
-SOBJS	:= lowlevel_init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#######################################################################
-##
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
diff --git a/board/imx31_litekit/config.mk b/board/imx31_litekit/config.mk
deleted file mode 100644
index d34dc02d9..000000000
--- a/board/imx31_litekit/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-TEXT_BASE = 0x87f00000
diff --git a/board/imx31_litekit/imx31_litekit.c b/board/imx31_litekit/imx31_litekit.c
deleted file mode 100644
index 8c6e6f5a9..000000000
--- a/board/imx31_litekit/imx31_litekit.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- *
- * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <asm/arch/mx31.h>
-#include <asm/arch/mx31-regs.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int dram_init(void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
-	return 0;
-}
-
-int board_init(void)
-{
-	__REG(CSCR_U(0)) = 0x0000cf03; /* CS0: Nor Flash */
-	__REG(CSCR_L(0)) = 0xa0330d01;
-	__REG(CSCR_A(0)) = 0x00220800;
-
-	__REG(CSCR_U(4)) = 0x0000dcf6; /* CS4: Network Controller */
-	__REG(CSCR_L(4)) = 0x444a4541;
-	__REG(CSCR_A(4)) = 0x44443302;
-
-	/* setup pins for UART1 */
-	mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX);
-	mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX);
-	mx31_gpio_mux(MUX_RTS1__UART1_RTS_B);
-	mx31_gpio_mux(MUX_RTS1__UART1_CTS_B);
-
-	gd->bd->bi_arch_number = 447;		/* board id for linux */
-	gd->bd->bi_boot_params = (0x80000100);	/* adress of boot parameters */
-
-	return 0;
-}
-
-int checkboard(void)
-{
-	printf("Board: i.MX31 Litekit\n");
-	return 0;
-}
diff --git a/board/imx31_litekit/lowlevel_init.S b/board/imx31_litekit/lowlevel_init.S
deleted file mode 100644
index 74d60678f..000000000
--- a/board/imx31_litekit/lowlevel_init.S
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- *
- * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <asm/arch/mx31-regs.h>
-
-.macro REG reg, val
-	ldr r2, =\reg
-	ldr r3, =\val
-	str r3, [r2]
-.endm
-
-.macro REG8 reg, val
-	ldr r2, =\reg
-	ldr r3, =\val
-	strb r3, [r2]
-.endm
-
-.macro DELAY loops
-	ldr r2, =\loops
-1:
-	subs	r2, r2, #1
-	nop
-	bcs 1b
-.endm
-
-.globl lowlevel_init
-lowlevel_init:
-
-	REG	IPU_CONF, IPU_CONF_DI_EN
-	REG	CCM_CCMR, 0x074B0BF5
-
-	DELAY 0x40000
-
-	REG	CCM_CCMR, 0x074B0BF5 | CCMR_MPE
-	REG	CCM_CCMR, (0x074B0BF5 | CCMR_MPE) & ~CCMR_MDS
-
-	REG	CCM_PDR0, PDR0_CSI_PODF(0x1ff) | PDR0_PER_PODF(7) |	\
-				PDR0_HSP_PODF(2) | PDR0_NFC_PODF(6) |	\
-				PDR0_IPG_PODF(1) | PDR0_MAX_PODF(2) |	\
-				PDR0_MCU_PODF(0)
-
-	REG	CCM_MPCTL, PLL_PD(0) | PLL_MFD(0x33) | PLL_MFI(7) |	\
-							PLL_MFN(0x23)
-	REG	CCM_SPCTL, PLL_PD(1) | PLL_MFD(4) | PLL_MFI(12) | PLL_MFN(1)
-
-	REG	0x43FAC26C, 0 /* SDCLK */
-	REG	0x43FAC270, 0 /* CAS */
-	REG	0x43FAC274, 0 /* RAS */
-	REG	0x43FAC27C, 0x1000 /* CS2 	CSD0) */
-	REG	0x43FAC284, 0 /* DQM3 */
-		/* DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 0x288..0x2DC) */
-	REG	0x43FAC288, 0
-	REG	0x43FAC28C, 0
-	REG	0x43FAC290, 0
-	REG	0x43FAC294, 0
-	REG	0x43FAC298, 0
-	REG	0x43FAC29C, 0
-	REG	0x43FAC2A0, 0
-	REG	0x43FAC2A4, 0
-	REG	0x43FAC2A8, 0
-	REG	0x43FAC2AC, 0
-	REG	0x43FAC2B0, 0
-	REG	0x43FAC2B4, 0
-	REG	0x43FAC2B8, 0
-	REG	0x43FAC2BC, 0
-	REG	0x43FAC2C0, 0
-	REG	0x43FAC2C4, 0
-	REG	0x43FAC2C8, 0
-	REG	0x43FAC2CC, 0
-	REG	0x43FAC2D0, 0
-	REG	0x43FAC2D4, 0
-	REG	0x43FAC2D8, 0
-	REG	0x43FAC2DC, 0
-	REG	0xB8001010, 0x00000004
-	REG	0xB8001004, 0x006ac73a
-	REG	0xB8001000, 0x92100000
-	REG	0x80000f00, 0x12344321
-	REG	0xB8001000, 0xa2100000
-	REG	0x80000000, 0x12344321
-	REG	0x80000000, 0x12344321
-	REG	0xB8001000, 0xb2100000
-	REG8	0x80000033, 0xda
-	REG8	0x81000000, 0xff
diff --git a/board/imx31_litekit/u-boot.lds b/board/imx31_litekit/u-boot.lds
deleted file mode 100644
index 1460adcdd..000000000
--- a/board/imx31_litekit/u-boot.lds
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * January 2004 - Changed to support H4 device
- * Copyright (c) 2004 Texas Instruments
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
-	. = 0x00000000;
-
-	. = ALIGN(4);
-	.text	   :
-	{
-	  cpu/arm1136/start.o	(.text)
-	  *(.text)
-	}
-
-	. = ALIGN(4);
-	.rodata : { *(.rodata) }
-
-	. = ALIGN(4);
-	.data : { *(.data) }
-
-	. = ALIGN(4);
-	.got : { *(.got) }
-
-	. = .;
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
-
-	. = ALIGN(4);
-	__bss_start = .;
-	.bss : { *(.bss) }
-	_end = .;
-}
diff --git a/board/imx31_phycore/Makefile b/board/imx31_phycore/Makefile
deleted file mode 100644
index de37ccaa8..000000000
--- a/board/imx31_phycore/Makefile
+++ /dev/null
@@ -1,49 +0,0 @@
-#
-# (C) Copyright 2000-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundatio; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= imx31_phycore.o
-SOBJS	:= lowlevel_init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
diff --git a/board/imx31_phycore/config.mk b/board/imx31_phycore/config.mk
deleted file mode 100644
index d34dc02d9..000000000
--- a/board/imx31_phycore/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-TEXT_BASE = 0x87f00000
diff --git a/board/imx31_phycore/imx31_phycore.c b/board/imx31_phycore/imx31_phycore.c
deleted file mode 100644
index 85fdc2530..000000000
--- a/board/imx31_phycore/imx31_phycore.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- *
- * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <asm/arch/mx31.h>
-#include <asm/arch/mx31-regs.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int dram_init(void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
-	return 0;
-}
-
-int board_init(void)
-{
-	__REG(CSCR_U(0)) = 0x0000cf03; /* CS0: Nor Flash */
-	__REG(CSCR_L(0)) = 0x10000d03;
-	__REG(CSCR_A(0)) = 0x00720900;
-
-	__REG(CSCR_U(1)) = 0x0000df06; /* CS1: Network Controller */
-	__REG(CSCR_L(1)) = 0x444a4541;
-	__REG(CSCR_A(1)) = 0x44443302;
-
-	__REG(CSCR_U(4)) = 0x0000d843; /* CS4: SRAM */
-	__REG(CSCR_L(4)) = 0x22252521;
-	__REG(CSCR_A(4)) = 0x22220a00;
-
-	/* setup pins for UART1 */
-	mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX);
-	mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX);
-	mx31_gpio_mux(MUX_RTS1__UART1_RTS_B);
-	mx31_gpio_mux(MUX_RTS1__UART1_CTS_B);
-
-	/* setup pins for I2C2 (for EEPROM, RTC) */
-	mx31_gpio_mux(MUX_CSPI2_MOSI__I2C2_SCL);
-	mx31_gpio_mux(MUX_CSPI2_MISO__I2C2_SCL);
-
-	gd->bd->bi_arch_number = 447;		/* board id for linux */
-	gd->bd->bi_boot_params = (0x80000100);	/* adress of boot parameters */
-
-	return 0;
-}
-
-int checkboard(void)
-{
-	printf("Board: Phytec phyCore i.MX31\n");
-	return 0;
-}
diff --git a/board/imx31_phycore/lowlevel_init.S b/board/imx31_phycore/lowlevel_init.S
deleted file mode 100644
index b0a538918..000000000
--- a/board/imx31_phycore/lowlevel_init.S
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- *
- * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <asm/arch/mx31-regs.h>
-
-.macro REG reg, val
-	ldr r2, =\reg
-	ldr r3, =\val
-	str r3, [r2]
-.endm
-
-.macro REG8 reg, val
-	ldr r2, =\reg
-	ldr r3, =\val
-	strb r3, [r2]
-.endm
-
-.macro DELAY loops
-	ldr r2, =\loops
-1:
-	subs	r2, r2, #1
-	nop
-	bcs 1b
-.endm
-
-.globl lowlevel_init
-lowlevel_init:
-
-	REG	IPU_CONF, IPU_CONF_DI_EN
-	REG	CCM_CCMR, 0x074B0BF5
-
-	DELAY 0x40000
-
-	REG	CCM_CCMR, 0x074B0BF5 | CCMR_MPE
-	REG	CCM_CCMR, (0x074B0BF5 | CCMR_MPE) & ~CCMR_MDS
-
-	REG	CCM_PDR0, PDR0_CSI_PODF(0xff1) | PDR0_PER_PODF(7) |	\
-			PDR0_HSP_PODF(3) | PDR0_NFC_PODF(5) |		\
-			PDR0_IPG_PODF(1) | PDR0_MAX_PODF(3) |		\
-			PDR0_MCU_PODF(0)
-
-	REG	CCM_MPCTL, PLL_PD(0) | PLL_MFD(0xe) | PLL_MFI(9) | PLL_MFN(0xd)
-
-	REG	CCM_SPCTL, PLL_PD(1) | PLL_MFD(0x43) | PLL_MFI(12) | PLL_MFN(1)
-
-	REG	0x43FAC26C, 0 /* SDCLK */
-	REG	0x43FAC270, 0 /* CAS */
-	REG	0x43FAC274, 0 /* RAS */
-	REG	0x43FAC27C, 0x1000 /* CS2 	CSD0) */
-	REG	0x43FAC284, 0 /* DQM3 */
-		/* DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 0x288..0x2DC) */
-	REG	0x43FAC288, 0
-	REG	0x43FAC28C, 0
-	REG	0x43FAC290, 0
-	REG	0x43FAC294, 0
-	REG	0x43FAC298, 0
-	REG	0x43FAC29C, 0
-	REG	0x43FAC2A0, 0
-	REG	0x43FAC2A4, 0
-	REG	0x43FAC2A8, 0
-	REG	0x43FAC2AC, 0
-	REG	0x43FAC2B0, 0
-	REG	0x43FAC2B4, 0
-	REG	0x43FAC2B8, 0
-	REG	0x43FAC2BC, 0
-	REG	0x43FAC2C0, 0
-	REG	0x43FAC2C4, 0
-	REG	0x43FAC2C8, 0
-	REG	0x43FAC2CC, 0
-	REG	0x43FAC2D0, 0
-	REG	0x43FAC2D4, 0
-	REG	0x43FAC2D8, 0
-	REG	0x43FAC2DC, 0
-	REG	0xB8001010, 0x00000004
-	REG	0xB8001004, 0x006ac73a
-	REG	0xB8001000, 0x92100000
-	REG	0x80000f00, 0x12344321
-	REG	0xB8001000, 0xa2100000
-	REG	0x80000000, 0x12344321
-	REG	0x80000000, 0x12344321
-	REG	0xB8001000, 0xb2100000
-	REG8	0x80000033, 0xda
-	REG8	0x81000000, 0xff
-	REG	0xB8001000, 0x82226080
-	REG	0x80000000, 0xDEADBEEF
diff --git a/board/imx31_phycore/u-boot.lds b/board/imx31_phycore/u-boot.lds
deleted file mode 100644
index 1460adcdd..000000000
--- a/board/imx31_phycore/u-boot.lds
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * January 2004 - Changed to support H4 device
- * Copyright (c) 2004 Texas Instruments
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
-	. = 0x00000000;
-
-	. = ALIGN(4);
-	.text	   :
-	{
-	  cpu/arm1136/start.o	(.text)
-	  *(.text)
-	}
-
-	. = ALIGN(4);
-	.rodata : { *(.rodata) }
-
-	. = ALIGN(4);
-	.data : { *(.data) }
-
-	. = ALIGN(4);
-	.got : { *(.got) }
-
-	. = .;
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
-
-	. = ALIGN(4);
-	__bss_start = .;
-	.bss : { *(.bss) }
-	_end = .;
-}
diff --git a/board/mx31ads/Makefile b/board/mx31ads/Makefile
deleted file mode 100644
index c854e0577..000000000
--- a/board/mx31ads/Makefile
+++ /dev/null
@@ -1,52 +0,0 @@
-#
-# (C) Copyright 2000-2008
-# Copyright (C) 2008, Guennadi Liakhovetski <lg@denx.de>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundatio; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= mx31ads.o
-SOBJS	:= lowlevel_init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/mx31ads/config.mk b/board/mx31ads/config.mk
deleted file mode 100644
index d34dc02d9..000000000
--- a/board/mx31ads/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-TEXT_BASE = 0x87f00000
diff --git a/board/mx31ads/lowlevel_init.S b/board/mx31ads/lowlevel_init.S
deleted file mode 100644
index bc05b43a3..000000000
--- a/board/mx31ads/lowlevel_init.S
+++ /dev/null
@@ -1,288 +0,0 @@
-/*
- * Copyright (C) 2008, Guennadi Liakhovetski <lg@denx.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <asm/arch/mx31-regs.h>
-
-.macro REG reg, val
-	ldr r2, =\reg
-	ldr r3, =\val
-	str r3, [r2]
-.endm
-
-.macro REG8 reg, val
-	ldr r2, =\reg
-	ldr r3, =\val
-	strb r3, [r2]
-.endm
-
-.macro DELAY loops
-	ldr r2, =\loops
-1:
-	subs	r2, r2, #1
-	nop
-	bcs 1b
-.endm
-
-/* RedBoot: AIPS setup - Only setup MPROTx registers.
- * The PACR default values are good.*/
-.macro init_aips
-	/*
-	 * Set all MPROTx to be non-bufferable, trusted for R/W,
-	 * not forced to user-mode.
-	 */
-	ldr r0, =0x43F00000
-	ldr r1, =0x77777777
-	str r1, [r0, #0x00]
-	str r1, [r0, #0x04]
-	ldr r0, =0x53F00000
-	str r1, [r0, #0x00]
-	str r1, [r0, #0x04]
-
-	/*
-	 * Clear the on and off peripheral modules Supervisor Protect bit
-	 * for SDMA to access them. Did not change the AIPS control registers
-	 * (offset 0x20) access type
-	 */
-	ldr r0, =0x43F00000
-	ldr r1, =0x0
-	str r1, [r0, #0x40]
-	str r1, [r0, #0x44]
-	str r1, [r0, #0x48]
-	str r1, [r0, #0x4C]
-	ldr r1, [r0, #0x50]
-	and r1, r1, #0x00FFFFFF
-	str r1, [r0, #0x50]
-
-	ldr r0, =0x53F00000
-	ldr r1, =0x0
-	str r1, [r0, #0x40]
-	str r1, [r0, #0x44]
-	str r1, [r0, #0x48]
-	str r1, [r0, #0x4C]
-	ldr r1, [r0, #0x50]
-	and r1, r1, #0x00FFFFFF
-	str r1, [r0, #0x50]
-.endm /* init_aips */
-
-/* RedBoot: MAX (Multi-Layer AHB Crossbar Switch) setup */
-.macro init_max
-	ldr r0, =0x43F04000
-	/* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */
-	ldr r1, =0x00302154
-	str r1, [r0, #0x000]        /* for S0 */
-	str r1, [r0, #0x100]        /* for S1 */
-	str r1, [r0, #0x200]        /* for S2 */
-	str r1, [r0, #0x300]        /* for S3 */
-	str r1, [r0, #0x400]        /* for S4 */
-	/* SGPCR - always park on last master */
-	ldr r1, =0x10
-	str r1, [r0, #0x010]        /* for S0 */
-	str r1, [r0, #0x110]        /* for S1 */
-	str r1, [r0, #0x210]        /* for S2 */
-	str r1, [r0, #0x310]        /* for S3 */
-	str r1, [r0, #0x410]        /* for S4 */
-	/* MGPCR - restore default values */
-	ldr r1, =0x0
-	str r1, [r0, #0x800]        /* for M0 */
-	str r1, [r0, #0x900]        /* for M1 */
-	str r1, [r0, #0xA00]        /* for M2 */
-	str r1, [r0, #0xB00]        /* for M3 */
-	str r1, [r0, #0xC00]        /* for M4 */
-	str r1, [r0, #0xD00]        /* for M5 */
-.endm /* init_max */
-
-/* RedBoot: M3IF setup */
-.macro init_m3if
-	/* Configure M3IF registers */
-	ldr r1, =0xB8003000
-	/*
-	* M3IF Control Register (M3IFCTL)
-	* MRRP[0] = L2CC0 not on priority list (0 << 0)	= 0x00000000
-	* MRRP[1] = L2CC1 not on priority list (0 << 0)	= 0x00000000
-	* MRRP[2] = MBX not on priority list (0 << 0)	= 0x00000000
-	* MRRP[3] = MAX1 not on priority list (0 << 0)	= 0x00000000
-	* MRRP[4] = SDMA not on priority list (0 << 0)	= 0x00000000
-	* MRRP[5] = MPEG4 not on priority list (0 << 0)	= 0x00000000
-	* MRRP[6] = IPU1 on priority list (1 << 6)	= 0x00000040
-	* MRRP[7] = IPU2 not on priority list (0 << 0)	= 0x00000000
-	*						------------
-	*						  0x00000040
-	*/
-	ldr r0, =0x00000040
-	str r0, [r1]  /* M3IF control reg */
-.endm /* init_m3if */
-
-/* RedBoot: To support 133MHz DDR */
-.macro  init_drive_strength
-	/*
-	 * Disable maximum drive strength SDRAM/DDR lines by clearing DSE1 bits
-	 * in SW_PAD_CTL registers
-	 */
-
-	/* SDCLK */
-	ldr r1, =0x43FAC200
-	ldr r0, [r1, #0x6C]
-	bic r0, r0, #(1 << 12)
-	str r0, [r1, #0x6C]
-
-	/* CAS */
-	ldr r0, [r1, #0x70]
-	bic r0, r0, #(1 << 22)
-	str r0, [r1, #0x70]
-
-	/* RAS */
-	ldr r0, [r1, #0x74]
-	bic r0, r0, #(1 << 2)
-	str r0, [r1, #0x74]
-
-	/* CS2 (CSD0) */
-	ldr r0, [r1, #0x7C]
-	bic r0, r0, #(1 << 22)
-	str r0, [r1, #0x7C]
-
-	/* DQM3 */
-	ldr r0, [r1, #0x84]
-	bic r0, r0, #(1 << 22)
-	str r0, [r1, #0x84]
-
-	/* DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 (0x288..0x2DC) */
-	ldr r2, =22	/* (0x2E0 - 0x288) / 4 = 22 */
-pad_loop:
-	ldr r0, [r1, #0x88]
-	bic r0, r0, #(1 << 22)
-	bic r0, r0, #(1 << 12)
-	bic r0, r0, #(1 << 2)
-	str r0, [r1, #0x88]
-	add r1, r1, #4
-	subs r2, r2, #0x1
-	bne pad_loop
-.endm /* init_drive_strength */
-
-/* CPLD on CS4 setup */
-.macro init_cs4
-	ldr r0, =WEIM_BASE
-	ldr r1, =0x0000D843
-	str r1, [r0, #0x40]
-	ldr r1, =0x22252521
-	str r1, [r0, #0x44]
-	ldr r1, =0x22220A00
-	str r1, [r0, #0x48]
-.endm /* init_cs4 */
-
-.globl lowlevel_init
-lowlevel_init:
-
-	/* Redboot initializes very early AIPS, what for?
-	 * Then it also initializes Multi-Layer AHB Crossbar Switch,
-	 * M3IF */
-	/* Also setup the Peripheral Port Remap register inside the core */
-	ldr r0, =0x40000015        /* start from AIPS 2GB region */
-	mcr p15, 0, r0, c15, c2, 4
-
-	init_aips
-
-	init_max
-
-	init_m3if
-
-	init_drive_strength
-
-	init_cs4
-
-	/* Image Processing Unit: */
-	/* Too early to switch display on? */
-	/* Switch on Display Interface */
-	REG	IPU_CONF, IPU_CONF_DI_EN
-	/* Clock Control Module: */
-	/* Use CKIH, MCU PLL off */
-	REG	CCM_CCMR, 0x074B0BF5
-
-	DELAY 0x40000
-	/* MCU PLL on */
-	REG	CCM_CCMR, 0x074B0BF5 | CCMR_MPE
-	/* Switch to MCU PLL */
-	REG	CCM_CCMR, (0x074B0BF5 | CCMR_MPE) & ~CCMR_MDS
-
-	/* PBC CPLD on CS4 */
-	mov	r1, #CS4_BASE
-	ldrh	r1, [r1, #0x2]
-	/* Is 27MHz switch set? */
-	ands	r1, r1, #0x16
-
-	/* 532-133-66.5 */
-	ldr	r0, =CCM_BASE
-	ldr	r1, =0xFF871D58
-	/* PDR0 */
-	str	r1, [r0, #0x4]
-	ldreq	r1, MPCTL_PARAM_532
-	ldrne	r1, MPCTL_PARAM_532_27
-	/* MPCTL */
-	str	r1, [r0, #0x10]
-
-	/* Set UPLL=240MHz, USB=60MHz */
-	ldr	r1, =0x49FCFE7F
-	/* PDR1 */
-	str	r1, [r0, #0x8]
-	ldreq	r1, UPCTL_PARAM_240
-	ldrne	r1, UPCTL_PARAM_240_27
-	/* UPCTL */
-	str	r1, [r0, #0x14]
-	/* default CLKO to 1/8 of the ARM core */
-	mov	r1, #0x000002C0
-	add	r1, r1, #0x00000006
-	/* COSR */
-	str	r1, [r0, #0x1c]
-
-	/* RedBoot sets 0x1ff, 7, 3, 5, 1, 3, 0 */
-/*	REG	CCM_PDR0, PDR0_CSI_PODF(0x1ff) | PDR0_PER_PODF(7) |	\
-			PDR0_HSP_PODF(2) | PDR0_NFC_PODF(6) |	\
-			PDR0_IPG_PODF(1) | PDR0_MAX_PODF(2) |	\
-			PDR0_MCU_PODF(0)*/
-
-	/* Redboot: 0, 51, 10, 12 / 0, 14, 9, 13 */
-/*	REG	CCM_MPCTL, PLL_PD(0) | PLL_MFD(0x33) | PLL_MFI(7) |	\
-						PLL_MFN(0x23)*/
-	/* Default: 1, 4, 12, 1 */
-	REG	CCM_SPCTL, PLL_PD(1) | PLL_MFD(4) | PLL_MFI(12) | PLL_MFN(1)
-
-	/* B8xxxxxx - NAND, 8xxxxxxx - CSD0 RAM */
-	REG	0xB8001010, 0x00000004
-	REG	0xB8001004, 0x006ac73a
-	REG	0xB8001000, 0x92100000
-	REG	0x80000f00, 0x12344321
-	REG	0xB8001000, 0xa2100000
-	REG	0x80000000, 0x12344321
-	REG	0x80000000, 0x12344321
-	REG	0xB8001000, 0xb2100000
-	REG8	0x80000033, 0xda
-	REG8	0x81000000, 0xff
-	REG	0xB8001000, 0x82226080
-	REG	0x80000000, 0xDEADBEEF
-	REG	0xB8001010, 0x0000000c
-
-	mov	pc, lr
-
-MPCTL_PARAM_532:
-	.word (((1-1) << 26) + ((52-1) << 16) + (10 << 10) + (12 << 0))
-MPCTL_PARAM_532_27:
-	.word (((1-1) << 26) + ((15-1) << 16) + (9  << 10) + (13 << 0))
-UPCTL_PARAM_240:
-	.word (((2-1) << 26) + ((13-1) << 16) + (9  << 10) + (3  << 0))
-UPCTL_PARAM_240_27:
-	.word (((2-1) << 26) + ((9 -1) << 16) + (8  << 10) + (8  << 0))
diff --git a/board/mx31ads/mx31ads.c b/board/mx31ads/mx31ads.c
deleted file mode 100644
index fe26b7318..000000000
--- a/board/mx31ads/mx31ads.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Copyright (C) 2008, Guennadi Liakhovetski <lg@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/mx31.h>
-#include <asm/arch/mx31-regs.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int dram_init(void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
-	return 0;
-}
-
-int board_init(void)
-{
-	int i;
-#if 0
-	/* CS0: Nor Flash */
-	/*
-	 * These are values from the RedBoot sources by Freescale. However,
-	 * under U-Boot with this configuration 32-bit accesses don't work,
-	 * lower 16 bits of data are read twice for each 32-bit read.
-	 */
-	__REG(CSCR_U(0)) = 0x23524E80;
-	__REG(CSCR_L(0)) = 0x10000D03; /* WRAP bit (1) is suspicious here, but
-					* disabling it doesn't help either */
-	__REG(CSCR_A(0)) = 0x00720900;
-#endif
-
-	/* setup pins for UART1 */
-	mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX);
-	mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX);
-	mx31_gpio_mux(MUX_RTS1__UART1_RTS_B);
-	mx31_gpio_mux(MUX_RTS1__UART1_CTS_B);
-
-	/* PBC setup */
-	/* Enable UART transceivers also reset the Ethernet/external UART */
-	readw(CS4_BASE + 4);
-
-	writew(0x8023, CS4_BASE + 4);
-
-	/* RedBoot also has an empty loop with 100000 iterations here -
-	 * clock doesn't run yet */
-	for (i = 0; i < 100000; i++)
-		;
-
-	/* Clear the reset, toggle the LEDs */
-	writew(0xDF, CS4_BASE + 6);
-
-	/* clock still doesn't run */
-	for (i = 0; i < 100000; i++)
-		;
-
-	/* See 1.5.4 in IMX31ADSE_PERI_BUS_CNTRL_CPLD_RM.pdf */
-	readb(CS4_BASE + 8);
-	readb(CS4_BASE + 7);
-	readb(CS4_BASE + 8);
-	readb(CS4_BASE + 7);
-
-	gd->bd->bi_arch_number = 447;		/* board id for linux */
-	gd->bd->bi_boot_params = 0x80000100;	/* adress of boot parameters */
-
-	return 0;
-}
-
-int checkboard(void)
-{
-	printf("Board: MX31ADS\n");
-	return 0;
-}
diff --git a/board/mx31ads/u-boot.lds b/board/mx31ads/u-boot.lds
deleted file mode 100644
index 1460adcdd..000000000
--- a/board/mx31ads/u-boot.lds
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * January 2004 - Changed to support H4 device
- * Copyright (c) 2004 Texas Instruments
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
-	. = 0x00000000;
-
-	. = ALIGN(4);
-	.text	   :
-	{
-	  cpu/arm1136/start.o	(.text)
-	  *(.text)
-	}
-
-	. = ALIGN(4);
-	.rodata : { *(.rodata) }
-
-	. = ALIGN(4);
-	.data : { *(.data) }
-
-	. = ALIGN(4);
-	.got : { *(.got) }
-
-	. = .;
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
-
-	. = ALIGN(4);
-	__bss_start = .;
-	.bss : { *(.bss) }
-	_end = .;
-}
diff --git a/board/prodrive/pmdra/Makefile b/board/prodrive/pmdra/Makefile
deleted file mode 100644
index 564e30e0a..000000000
--- a/board/prodrive/pmdra/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= pmdra.o
-SOBJS	:= board_init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak *~ .depend
-
-#########################################################################
-# This is for $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/prodrive/pmdra/board_init.S b/board/prodrive/pmdra/board_init.S
deleted file mode 100644
index 3e4ef7c33..000000000
--- a/board/prodrive/pmdra/board_init.S
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright (C) 2008 Prodrive B.V.
- *
- * Board-specific low level initialization code. Called at the very end
- * of cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no
- * initialization required.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-
-.globl	dv_board_init
-dv_board_init:
-
-	mov	pc, lr
diff --git a/board/prodrive/pmdra/config.mk b/board/prodrive/pmdra/config.mk
deleted file mode 100644
index aa89d0ec8..000000000
--- a/board/prodrive/pmdra/config.mk
+++ /dev/null
@@ -1,39 +0,0 @@
-#
-# (C) Copyright 2002
-# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
-# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
-#
-# (C) Copyright 2003
-# Texas Instruments, <www.ti.com>
-# Swaminathan <swami.iyer@ti.com>
-#
-# Davinci EVM board (ARM925EJS) cpu
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# Davinci EVM has 1 bank of 256 MB DDR RAM
-# Physical Address:
-# 8000'0000 to 9000'0000
-#
-# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
-#
-# Visioneering Corp. Sonata board (ARM926EJS) cpu
-#
-# Sonata board has 1 bank of 128 MB DDR RAM
-# Physical Address:
-# 8000'0000 to 8800'0000
-#
-# Razorstream, LLC. SCHMOOGIE board (ARM926EJS) cpu
-#
-# Schmoogie board has 1 bank of 128 MB DDR RAM
-# Physical Address:
-# 8000'0000 to 8800'0000
-#
-# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-#
-# we load ourself to 8108 '0000
-#
-#
-
-#Provide at least 16MB spacing between us and the Linux Kernel image
-TEXT_BASE = 0x81080000
diff --git a/board/prodrive/pmdra/pmdra.c b/board/prodrive/pmdra/pmdra.c
deleted file mode 100644
index 42f7770e4..000000000
--- a/board/prodrive/pmdra/pmdra.c
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * Copyright (C) 2008 Prodrive BV <pv@prodrive.nl>
- *
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * Parts are shamelessly stolen from various TI sources, original copyright
- * follows:
- * ---------------------------------------------------------------------------
- *
- * Copyright (C) 2004 Texas Instruments.
- *
- * ---------------------------------------------------------------------------
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- * ---------------------------------------------------------------------------
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/emac_defs.h>
-
-#define MACH_TYPE_DAVINCI_EVM		901
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern void	timer_init(void);
-extern int	eth_hw_init(void);
-extern phy_t	phy;
-
-/* Works on Always On power domain only (no PD argument) */
-void lpsc_on(unsigned int id)
-{
-	dv_reg_p	mdstat, mdctl;
-
-	if (id >= DAVINCI_LPSC_GEM)
-		return;			/* Don't work on DSP Power Domain */
-
-	mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4));
-	mdctl = REG_P(PSC_MDCTL_BASE + (id * 4));
-
-	while (REG(PSC_PTSTAT) & 0x01) {; }
-
-	if ((*mdstat & 0x1f) == 0x03)
-		return;			/* Already on and enabled */
-
-	*mdctl |= 0x03;
-
-	/* Special treatment for some modules as for sprue14 p.7.4.2 */
-	if ((id == DAVINCI_LPSC_VPSSSLV) ||
-	    (id == DAVINCI_LPSC_EMAC) ||
-	    (id == DAVINCI_LPSC_EMAC_WRAPPER) ||
-	    (id == DAVINCI_LPSC_MDIO) ||
-	    (id == DAVINCI_LPSC_USB) ||
-	    (id == DAVINCI_LPSC_ATA) ||
-	    (id == DAVINCI_LPSC_VLYNQ) ||
-	    (id == DAVINCI_LPSC_UHPI) ||
-	    (id == DAVINCI_LPSC_DDR_EMIF) ||
-	    (id == DAVINCI_LPSC_AEMIF) ||
-	    (id == DAVINCI_LPSC_MMC_SD) ||
-	    (id == DAVINCI_LPSC_MEMSTICK) ||
-	    (id == DAVINCI_LPSC_McBSP) ||
-	    (id == DAVINCI_LPSC_GPIO))
-		*mdctl |= 0x200;
-
-	REG(PSC_PTCMD) = 0x01;
-
-	while (REG(PSC_PTSTAT) & 0x03) {; }
-	while ((*mdstat & 0x1f) != 0x03) {; }	/* Probably an overkill... */
-}
-
-void dsp_on(void)
-{
-	int	i;
-
-	if (REG(PSC_PDSTAT1) & 0x1f)
-		return;			/* Already on */
-
-	REG(PSC_GBLCTL) |= 0x01;
-	REG(PSC_PDCTL1) |= 0x01;
-	REG(PSC_PDCTL1) &= ~0x100;
-	REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) |= 0x03;
-	REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) &= 0xfffffeff;
-	REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) |= 0x03;
-	REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) &= 0xfffffeff;
-	REG(PSC_PTCMD) = 0x02;
-
-	for (i = 0; i < 100; i++) {
-		if (REG(PSC_EPCPR) & 0x02)
-			break;
-	}
-
-	REG(PSC_CHP_SHRTSW) = 0x01;
-	REG(PSC_PDCTL1) |= 0x100;
-	REG(PSC_EPCCR) = 0x02;
-
-	for (i = 0; i < 100; i++) {
-		if (!(REG(PSC_PTSTAT) & 0x02))
-			break;
-	}
-
-	REG(PSC_GBLCTL) &= ~0x1f;
-}
-
-
-int board_init(void)
-{
-	/* arch number of the board */
-	gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_EVM;
-
-	/* address of boot parameters */
-	gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
-
-	/* Workaround for TMS320DM6446 errata 1.3.22 */
-	REG(PSC_SILVER_BULLET) = 0;
-
-	/* Power on required peripherals */
-	lpsc_on(DAVINCI_LPSC_EMAC);
-	lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER);
-	lpsc_on(DAVINCI_LPSC_MDIO);
-	lpsc_on(DAVINCI_LPSC_I2C);
-	lpsc_on(DAVINCI_LPSC_UART0);
-	lpsc_on(DAVINCI_LPSC_UART2);
-	lpsc_on(DAVINCI_LPSC_TIMER1);
-	lpsc_on(DAVINCI_LPSC_GPIO);
-
-	/* Powerup the DSP */
-	dsp_on();
-
-	/* Bringup UART0 and 2 out of reset */
-	REG(UART0_PWREMU_MGMT) = 0x00006001;
-	REG(UART2_PWREMU_MGMT) = 0x00006001;
-
-	/* Enable GIO3.3V cells used for EMAC */
-	REG(VDD3P3V_PWDN) = 0;
-
-	/* Enable UART0 and 2 MUX lines */
-	REG(PINMUX1) |= 1;
-	REG(PINMUX1) |= 4;
-
-	/* Enable EMAC and AEMIF pins */
-	REG(PINMUX0) = 0x80000c1f;
-
-	/* Enable I2C pin Mux */
-	REG(PINMUX1) |= (1 << 7);
-
-	/* Set the Bus Priority Register to appropriate value */
-	REG(VBPR) = 0x20;
-
-	timer_init();
-
-	return(0);
-}
-
-int misc_init_r(void)
-{
-	int		clk = 0;
-
-	clk = ((REG(PLL2_PLLM) + 1) * 27) / ((REG(PLL2_DIV2) & 0x1f) + 1);
-
-	printf("ARM Clock : %dMHz\n", ((REG(PLL1_PLLM) + 1) * 27)/2);
-	printf("DDR Clock : %dMHz\n", (clk / 2));
-
-	if (!eth_hw_init())
-		printf("ethernet init failed!\n");
-	else
-		printf("ETH PHY   : %s\n", phy.name);
-
-	return(0);
-}
-
-int dram_init(void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
-	return(0);
-}
diff --git a/board/prodrive/pmdra/u-boot.lds b/board/prodrive/pmdra/u-boot.lds
deleted file mode 100644
index 710b2a2d6..000000000
--- a/board/prodrive/pmdra/u-boot.lds
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
-	. = 0x00000000;
-	. = ALIGN(4);
-	.text	:
-	{
-	  cpu/arm926ejs/start.o	(.text)
-	  *(.text)
-	}
-	. = ALIGN(4);
-	.rodata : { *(.rodata) }
-	. = ALIGN(4);
-	.data : { *(.data) }
-	. = ALIGN(4);
-	.got : { *(.got) }
-
-	. = .;
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
-
-	. = ALIGN(4);
-	__bss_start = .;
-	.bss : { *(.bss) }
-	_end = .;
-}
diff --git a/cpu/arm1136/Makefile b/cpu/arm1136/Makefile
index 7701b03bb..d5ac7d3fd 100644
--- a/cpu/arm1136/Makefile
+++ b/cpu/arm1136/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= $(obj)lib$(CPU).a
 
 START	= start.o
-COBJS	= cpu.o
+COBJS	= interrupts.o cpu.o
 
 SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS) $(SOBJS))
diff --git a/cpu/arm1136/cpu.c b/cpu/arm1136/cpu.c
index 90e955303..fa78eaa7f 100644
--- a/cpu/arm1136/cpu.c
+++ b/cpu/arm1136/cpu.c
@@ -33,6 +33,9 @@
 
 #include <common.h>
 #include <command.h>
+#if !defined(CONFIG_INTEGRATOR) && ! defined(CONFIG_ARCH_CINTEGRATOR)
+#include <asm/arch/omap2420.h>
+#endif
 
 #ifdef CONFIG_USE_IRQ
 DECLARE_GLOBAL_DATA_PTR;
@@ -44,10 +47,10 @@ static unsigned long read_p15_c1 (void)
 	unsigned long value;
 
 	__asm__ __volatile__(
-		"mrc	p15, 0, %0, c1, c0, 0   @ read control reg\n"
-		: "=r" (value)
-		:
-		: "memory");
+						"mrc	p15, 0, %0, c1, c0, 0   @ read control reg\n"
+						: "=r" (value)
+						:
+						: "memory");
 	return value;
 }
 
diff --git a/cpu/arm1136/omap24xx/interrupts.c b/cpu/arm1136/interrupts.c
index 8503b24a8..491c902ac 100755..100644
--- a/cpu/arm1136/omap24xx/interrupts.c
+++ b/cpu/arm1136/interrupts.c
@@ -32,28 +32,31 @@
 
 #include <common.h>
 #include <asm/arch/bits.h>
-#include <asm/arch/omap2420.h>
+
+#if !defined(CONFIG_INTEGRATOR) && ! defined(CONFIG_ARCH_CINTEGRATOR)
+# include <asm/arch/omap2420.h>
+#endif
 
 #define TIMER_LOAD_VAL 0
 
 /* macro to read the 32 bit timer */
-#define READ_TIMER (*((volatile ulong*)(CFG_TIMERBASE+TCRR)))
+#define READ_TIMER (*(volatile ulong *)(CFG_TIMERBASE+TCRR))
+
+#if defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_CINTEGRATOR)
+/* Use the IntegratorCP function from board/integratorcp.c */
+#else
 
 static ulong timestamp;
 static ulong lastinc;
 
-/*
- * nothing really to do with interrupts, just starts up a counter.
- */
-int interrupt_init(void)
+/* nothing really to do with interrupts, just starts up a counter. */
+int interrupt_init (void)
 {
 	int32_t val;
 
 	/* Start the counter ticking up */
-	/* reload value on overflow*/
-	*((int32_t *) (CFG_TIMERBASE + TLDR)) = TIMER_LOAD_VAL;
-	/* mask to enable timer*/
-	val = (CFG_PVT << 2) | BIT5 | BIT1 | BIT0;
+	*((int32_t *) (CFG_TIMERBASE + TLDR)) = TIMER_LOAD_VAL;	/* reload value on overflow*/
+	val = (CFG_PVT << 2) | BIT5 | BIT1 | BIT0;		/* mask to enable timer*/
 	*((int32_t *) (CFG_TIMERBASE + TCLR)) = val;	/* start timer */
 
 	reset_timer_masked(); /* init the timestamp and lastinc value */
@@ -63,99 +66,82 @@ int interrupt_init(void)
 /*
  * timer without interrupts
  */
-void reset_timer(void)
+void reset_timer (void)
 {
-	reset_timer_masked();
+	reset_timer_masked ();
 }
 
-ulong get_timer(ulong base)
+ulong get_timer (ulong base)
 {
-	return get_timer_masked() - base;
+	return get_timer_masked () - base;
 }
 
-void set_timer(ulong t)
+void set_timer (ulong t)
 {
 	timestamp = t;
 }
 
 /* delay x useconds AND perserve advance timstamp value */
-void udelay(unsigned long usec)
+void udelay (unsigned long usec)
 {
 	ulong tmo, tmp;
 
-	/* if "big" number, spread normalization to seconds */
-	if (usec >= 1000) {
-		/* start to normalize for usec to ticks per sec */
-		tmo = usec / 1000;
-		/* find number of "ticks" to wait to achieve target */
-		tmo *= CFG_HZ;
-		/* finish normalize. */
-		tmo /= 1000;
-	} else {
-		/* else small number, don't kill it prior to HZ multiply */
+	if (usec >= 1000) {			/* if "big" number, spread normalization to seconds */
+		tmo = usec / 1000;		/* start to normalize for usec to ticks per sec */
+		tmo *= CFG_HZ;			/* find number of "ticks" to wait to achieve target */
+		tmo /= 1000;			/* finish normalize. */
+	} else {					/* else small number, don't kill it prior to HZ multiply */
 		tmo = usec * CFG_HZ;
 		tmo /= (1000*1000);
 	}
-	/* get current timestamp */
-	tmp = get_timer(0);
-	if ((tmo + tmp + 1) < tmp)
-		/* setting this forward will roll time stamp */
-		/* reset "advancing" timestamp to 0, set lastinc value */
-		reset_timer_masked();
+
+	tmp = get_timer (0);		/* get current timestamp */
+	if ( (tmo + tmp + 1) < tmp )/* if setting this forward will roll time stamp */
+		reset_timer_masked ();	/* reset "advancing" timestamp to 0, set lastinc value */
 	else
-		/* else, set advancing stamp wake up time */
-		tmo	+= tmp;
-	while (get_timer_masked() < tmo)/* loop till event */
+		tmo	+= tmp;				/* else, set advancing stamp wake up time */
+	while (get_timer_masked () < tmo)/* loop till event */
 		/*NOP*/;
 }
 
-void reset_timer_masked(void)
+void reset_timer_masked (void)
 {
 	/* reset time */
-	/* capture current incrementer value time */
-	lastinc = READ_TIMER;
-	/* start "advancing" time stamp from 0 */
-	timestamp = 0;
+	lastinc = READ_TIMER;		/* capture current incrementer value time */
+	timestamp = 0;				/* start "advancing" time stamp from 0 */
 }
 
-ulong get_timer_masked(void)
+ulong get_timer_masked (void)
 {
-	ulong now = READ_TIMER;	/* current tick value */
+	ulong now = READ_TIMER;		/* current tick value */
 
-	/* normal mode (non roll) */
-	if (now >= lastinc)
-		/* move stamp forward with absolute diff ticks */
-		timestamp += (now - lastinc);
-	else
-		/* we have rollover of incrementer */
+	if (now >= lastinc)			/* normal mode (non roll) */
+		timestamp += (now - lastinc); /* move stamp fordward with absoulte diff ticks */
+	else						/* we have rollover of incrementer */
 		timestamp += (0xFFFFFFFF - lastinc) + now;
 	lastinc = now;
 	return timestamp;
 }
 
 /* waits specified delay value and resets timestamp */
-void udelay_masked(unsigned long usec)
+void udelay_masked (unsigned long usec)
 {
 	ulong tmo;
 	ulong endtime;
 	signed long diff;
 
-	if (usec >= 1000) {
-		/* "big" number, spread normalization to seconds */
-		/* start to normalize for usec to ticks per sec */
-		tmo = usec / 1000;
-		/* find number of "ticks" to wait to achieve target */
-		tmo *= CFG_HZ;
-		tmo /= 1000;/* finish normalize. */
-	} else {
-		/* else small number, don't kill it prior to HZ multiply */
+	if (usec >= 1000) {			/* if "big" number, spread normalization to seconds */
+		tmo = usec / 1000;		/* start to normalize for usec to ticks per sec */
+		tmo *= CFG_HZ;			/* find number of "ticks" to wait to achieve target */
+		tmo /= 1000;			/* finish normalize. */
+	} else {					/* else small number, don't kill it prior to HZ multiply */
 		tmo = usec * CFG_HZ;
 		tmo /= (1000*1000);
 	}
-	endtime = get_timer_masked() + tmo;
+	endtime = get_timer_masked () + tmo;
 
 	do {
-		ulong now = get_timer_masked();
+		ulong now = get_timer_masked ();
 		diff = endtime - now;
 	} while (diff >= 0);
 }
@@ -172,9 +158,10 @@ unsigned long long get_ticks(void)
  * This function is derived from PowerPC code (timebase clock frequency).
  * On ARM it returns the number of timer ticks per second.
  */
-ulong get_tbclk(void)
+ulong get_tbclk (void)
 {
 	ulong tbclk;
 	tbclk = CFG_HZ;
 	return tbclk;
 }
+#endif /* !Integrator/CP */
diff --git a/cpu/arm1136/mx31/Makefile b/cpu/arm1136/mx31/Makefile
deleted file mode 100644
index 1fc8eea45..000000000
--- a/cpu/arm1136/mx31/Makefile
+++ /dev/null
@@ -1,44 +0,0 @@
-#
-# (C) Copyright 2000-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundatio; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(SOC).a
-
-COBJS	= interrupts.o serial.o generic.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
-
-all:	$(obj).depend $(LIB)
-
-$(LIB):	$(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-#######################################################################
-##
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
diff --git a/cpu/arm1136/mx31/generic.c b/cpu/arm1136/mx31/generic.c
deleted file mode 100644
index 297d616d5..000000000
--- a/cpu/arm1136/mx31/generic.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * (C) Copyright 2007
- * Sascha Hauer, Pengutronix
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/mx31-regs.h>
-
-static u32 mx31_decode_pll(u32 reg, u32 infreq)
-{
-	u32 mfi = (reg >> 10) & 0xf;
-	u32 mfn = reg & 0x3f;
-	u32 mfd = (reg >> 16) & 0x3f;
-	u32 pd =  (reg >> 26) & 0xf;
-
-	mfi = mfi <= 5 ? 5 : mfi;
-	mfd += 1;
-	pd += 1;
-
-	return ((2 * (infreq >> 10) * (mfi * mfd + mfn)) /
-		(mfd * pd)) << 10;
-}
-
-u32 mx31_get_mpl_dpdgck_clk(void)
-{
-	u32 infreq;
-
-	if ((__REG(CCM_CCMR) & CCMR_PRCS_MASK) == CCMR_FPM)
-		infreq = CONFIG_MX31_CLK32 * 1024;
-	else
-		infreq = CONFIG_MX31_HCLK_FREQ;
-
-	return mx31_decode_pll(__REG(CCM_MPCTL), infreq); }
-
-u32 mx31_get_mcu_main_clk(void)
-{
-	/* For now we assume mpl_dpdgck_clk == mcu_main_clk
-	 * which should be correct for most boards
-	 */
-	return mx31_get_mpl_dpdgck_clk();
-}
-
-u32 mx31_get_ipg_clk(void)
-{
-	u32 freq = mx31_get_mcu_main_clk();
-	u32 pdr0 = __REG(CCM_PDR0);
-
-	freq /= ((pdr0 >> 3) & 0x7) + 1;
-	freq /= ((pdr0 >> 6) & 0x3) + 1;
-
-	return freq;
-}
-
-void mx31_dump_clocks(void)
-{
-	u32 cpufreq = mx31_get_mcu_main_clk();
-	printf("mx31 cpu clock: %dMHz\n", cpufreq / 1000000);
-	printf("ipg clock     : %dHz\n", mx31_get_ipg_clk());
-}
-
-void mx31_gpio_mux(unsigned long mode)
-{
-	unsigned long reg, shift, tmp;
-
-	reg = IOMUXC_BASE + (mode & 0xfc);
-	shift = (~mode & 0x3) * 8;
-
-	tmp = __REG(reg);
-	tmp &= ~(0xff << shift);
-	tmp |= ((mode >> 8) & 0xff) << shift;
-	__REG(reg) = tmp;
-}
-
-#if defined(CONFIG_DISPLAY_CPUINFO)
-int print_cpuinfo(void)
-{
-	printf("CPU:   Freescale i.MX31 at %d MHz\n",
-		mx31_get_mcu_main_clk() / 1000000);
-	return 0;
-}
-#endif
diff --git a/cpu/arm1136/mx31/interrupts.c b/cpu/arm1136/mx31/interrupts.c
deleted file mode 100644
index 189f6017a..000000000
--- a/cpu/arm1136/mx31/interrupts.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * (C) Copyright 2007
- * Sascha Hauer, Pengutronix
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/mx31-regs.h>
-
-#define TIMER_BASE 0x53f90000 /* General purpose timer 1 */
-
-/* General purpose timers registers */
-#define GPTCR   __REG(TIMER_BASE) /* Control register */
-#define GPTPR  __REG(TIMER_BASE + 0x4) /* Prescaler register */
-#define GPTSR   __REG(TIMER_BASE + 0x8) /* Status register */
-#define GPTCNT __REG(TIMER_BASE + 0x24) /* Counter register */
-
-/* General purpose timers bitfields */
-#define GPTCR_SWR       (1<<15) /* Software reset */
-#define GPTCR_FRR       (1<<9)  /* Freerun / restart */
-#define GPTCR_CLKSOURCE_32 (4<<6)  /* Clock source */
-#define GPTCR_TEN       (1)     /* Timer enable */
-
-/*
- * nothing really to do with interrupts, just starts up a counter.
- */
-int interrupt_init(void)
-{
-	int i;
-
-	/* setup GP Timer 1 */
-	GPTCR = GPTCR_SWR;
-	for (i = 0; i < 100; i++) GPTCR = 0; /* We have no udelay by now */
-	GPTPR = 0; /* 32Khz */
-	/* Freerun Mode, PERCLK1 input */
-	GPTCR |= GPTCR_CLKSOURCE_32 | GPTCR_TEN;
-
-	return 0;
-}
-
-void reset_timer_masked(void)
-{
-	GPTCR = 0;
-	/* Freerun Mode, PERCLK1 input*/
-	GPTCR = GPTCR_CLKSOURCE_32 | GPTCR_TEN;
-}
-
-ulong get_timer_masked(void)
-{
-	ulong val = GPTCNT;
-	return val;
-}
-
-ulong get_timer(ulong base)
-{
-	return get_timer_masked() - base;
-}
-
-void set_timer(ulong t)
-{
-}
-
-/* delay x useconds AND perserve advance timstamp value */
-void udelay(unsigned long usec)
-{
-	ulong tmo, tmp;
-
-	if (usec >= 1000) {
-	/* "big" number, spread normalization to seconds */
-		/* start to normalize for usec to ticks per sec */
-		tmo = usec / 1000;
-		/* find number of "ticks" to wait to achieve target */
-		tmo *= CFG_HZ;
-		tmo /= 1000;	/* finish normalize. */
-	} else {
-		/* else small number, don't kill it prior to HZ multiply */
-		tmo = usec * CFG_HZ;
-		tmo /= (1000*1000);
-	}
-
-	tmp = get_timer(0);		/* get current timestamp */
-	if ((tmo + tmp + 1) < tmp)
-		/* setting this forward will roll time stamp */
-		/* reset "advancing" timestamp to 0, set lastinc value */
-		reset_timer_masked();
-	else
-		/* else, set advancing stamp wake up time */
-		tmo	+= tmp;
-	while (get_timer_masked() < tmo)/* loop till event */
-		/*NOP*/;
-}
-
-void reset_cpu(ulong addr)
-{
-	__REG16(WDOG_BASE) = 4;
-}
diff --git a/cpu/arm1136/mx31/serial.c b/cpu/arm1136/mx31/serial.c
deleted file mode 100644
index f7e1b3b1a..000000000
--- a/cpu/arm1136/mx31/serial.c
+++ /dev/null
@@ -1,230 +0,0 @@
-/*
- * (c) 2007 Sascha Hauer <s.hauer@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- *
- */
-
-#include <common.h>
-
-#if defined CONFIG_MX31_UART
-
-#include <asm/arch/mx31.h>
-
-#define __REG(x)     (*((volatile u32 *)(x)))
-
-#ifdef CFG_MX31_UART1
-#define UART_PHYS 0x43f90000
-#elif defined(CFG_MX31_UART2)
-#define UART_PHYS 0x43f94000
-#elif defined(CFG_MX31_UART3)
-#define UART_PHYS 0x5000c000
-#elif defined(CFG_MX31_UART4)
-#define UART_PHYS 0x43fb0000
-#elif defined(CFG_MX31_UART5)
-#define UART_PHYS 0x43fb4000
-#else
-#error "define CFG_MX31_UARTx to use the mx31 UART driver"
-#endif
-
-/* Register definitions */
-#define URXD  0x0  /* Receiver Register */
-#define UTXD  0x40 /* Transmitter Register */
-#define UCR1  0x80 /* Control Register 1 */
-#define UCR2  0x84 /* Control Register 2 */
-#define UCR3  0x88 /* Control Register 3 */
-#define UCR4  0x8c /* Control Register 4 */
-#define UFCR  0x90 /* FIFO Control Register */
-#define USR1  0x94 /* Status Register 1 */
-#define USR2  0x98 /* Status Register 2 */
-#define UESC  0x9c /* Escape Character Register */
-#define UTIM  0xa0 /* Escape Timer Register */
-#define UBIR  0xa4 /* BRM Incremental Register */
-#define UBMR  0xa8 /* BRM Modulator Register */
-#define UBRC  0xac /* Baud Rate Count Register */
-#define UTS   0xb4 /* UART Test Register (mx31) */
-
-/* UART Control Register Bit Fields.*/
-#define  URXD_CHARRDY    (1<<15)
-#define  URXD_ERR        (1<<14)
-#define  URXD_OVRRUN     (1<<13)
-#define  URXD_FRMERR     (1<<12)
-#define  URXD_BRK        (1<<11)
-#define  URXD_PRERR      (1<<10)
-#define  UCR1_ADEN       (1<<15) /* Auto dectect interrupt */
-#define  UCR1_ADBR       (1<<14) /* Auto detect baud rate */
-#define  UCR1_TRDYEN     (1<<13) /* Transmitter ready interrupt enable */
-#define  UCR1_IDEN       (1<<12) /* Idle condition interrupt */
-#define  UCR1_RRDYEN     (1<<9)  /* Recv ready interrupt enable */
-#define  UCR1_RDMAEN     (1<<8)  /* Recv ready DMA enable */
-#define  UCR1_IREN       (1<<7)  /* Infrared interface enable */
-#define  UCR1_TXMPTYEN   (1<<6)  /* Transimitter empty interrupt enable */
-#define  UCR1_RTSDEN     (1<<5)  /* RTS delta interrupt enable */
-#define  UCR1_SNDBRK     (1<<4)  /* Send break */
-#define  UCR1_TDMAEN     (1<<3)  /* Transmitter ready DMA enable */
-#define  UCR1_UARTCLKEN  (1<<2)  /* UART clock enabled */
-#define  UCR1_DOZE       (1<<1)  /* Doze */
-#define  UCR1_UARTEN     (1<<0)  /* UART enabled */
-#define  UCR2_ESCI     	 (1<<15) /* Escape seq interrupt enable */
-#define  UCR2_IRTS  	 (1<<14) /* Ignore RTS pin */
-#define  UCR2_CTSC  	 (1<<13) /* CTS pin control */
-#define  UCR2_CTS        (1<<12) /* Clear to send */
-#define  UCR2_ESCEN      (1<<11) /* Escape enable */
-#define  UCR2_PREN       (1<<8)  /* Parity enable */
-#define  UCR2_PROE       (1<<7)  /* Parity odd/even */
-#define  UCR2_STPB       (1<<6)	 /* Stop */
-#define  UCR2_WS         (1<<5)	 /* Word size */
-#define  UCR2_RTSEN      (1<<4)	 /* Request to send interrupt enable */
-#define  UCR2_TXEN       (1<<2)	 /* Transmitter enabled */
-#define  UCR2_RXEN       (1<<1)	 /* Receiver enabled */
-#define  UCR2_SRST 	 (1<<0)	 /* SW reset */
-#define  UCR3_DTREN 	 (1<<13) /* DTR interrupt enable */
-#define  UCR3_PARERREN   (1<<12) /* Parity enable */
-#define  UCR3_FRAERREN   (1<<11) /* Frame error interrupt enable */
-#define  UCR3_DSR        (1<<10) /* Data set ready */
-#define  UCR3_DCD        (1<<9)  /* Data carrier detect */
-#define  UCR3_RI         (1<<8)  /* Ring indicator */
-#define  UCR3_TIMEOUTEN  (1<<7)  /* Timeout interrupt enable */
-#define  UCR3_RXDSEN	 (1<<6)  /* Receive status interrupt enable */
-#define  UCR3_AIRINTEN   (1<<5)  /* Async IR wake interrupt enable */
-#define  UCR3_AWAKEN	 (1<<4)  /* Async wake interrupt enable */
-#define  UCR3_REF25 	 (1<<3)  /* Ref freq 25 MHz */
-#define  UCR3_REF30 	 (1<<2)  /* Ref Freq 30 MHz */
-#define  UCR3_INVT  	 (1<<1)  /* Inverted Infrared transmission */
-#define  UCR3_BPEN  	 (1<<0)  /* Preset registers enable */
-#define  UCR4_CTSTL_32   (32<<10) /* CTS trigger level (32 chars) */
-#define  UCR4_INVR  	 (1<<9)  /* Inverted infrared reception */
-#define  UCR4_ENIRI 	 (1<<8)  /* Serial infrared interrupt enable */
-#define  UCR4_WKEN  	 (1<<7)  /* Wake interrupt enable */
-#define  UCR4_REF16 	 (1<<6)  /* Ref freq 16 MHz */
-#define  UCR4_IRSC  	 (1<<5)  /* IR special case */
-#define  UCR4_TCEN  	 (1<<3)  /* Transmit complete interrupt enable */
-#define  UCR4_BKEN  	 (1<<2)  /* Break condition interrupt enable */
-#define  UCR4_OREN  	 (1<<1)  /* Receiver overrun interrupt enable */
-#define  UCR4_DREN  	 (1<<0)  /* Recv data ready interrupt enable */
-#define  UFCR_RXTL_SHF   0       /* Receiver trigger level shift */
-#define  UFCR_RFDIV      (7<<7)  /* Reference freq divider mask */
-#define  UFCR_TXTL_SHF   10      /* Transmitter trigger level shift */
-#define  USR1_PARITYERR  (1<<15) /* Parity error interrupt flag */
-#define  USR1_RTSS  	 (1<<14) /* RTS pin status */
-#define  USR1_TRDY  	 (1<<13) /* Transmitter ready interrupt/dma flag */
-#define  USR1_RTSD  	 (1<<12) /* RTS delta */
-#define  USR1_ESCF  	 (1<<11) /* Escape seq interrupt flag */
-#define  USR1_FRAMERR    (1<<10) /* Frame error interrupt flag */
-#define  USR1_RRDY       (1<<9)	 /* Receiver ready interrupt/dma flag */
-#define  USR1_TIMEOUT    (1<<7)	 /* Receive timeout interrupt status */
-#define  USR1_RXDS  	 (1<<6)	 /* Receiver idle interrupt flag */
-#define  USR1_AIRINT	 (1<<5)	 /* Async IR wake interrupt flag */
-#define  USR1_AWAKE 	 (1<<4)	 /* Aysnc wake interrupt flag */
-#define  USR2_ADET  	 (1<<15) /* Auto baud rate detect complete */
-#define  USR2_TXFE  	 (1<<14) /* Transmit buffer FIFO empty */
-#define  USR2_DTRF  	 (1<<13) /* DTR edge interrupt flag */
-#define  USR2_IDLE  	 (1<<12) /* Idle condition */
-#define  USR2_IRINT 	 (1<<8)	 /* Serial infrared interrupt flag */
-#define  USR2_WAKE  	 (1<<7)	 /* Wake */
-#define  USR2_RTSF  	 (1<<4)	 /* RTS edge interrupt flag */
-#define  USR2_TXDC  	 (1<<3)	 /* Transmitter complete */
-#define  USR2_BRCD  	 (1<<2)	 /* Break condition */
-#define  USR2_ORE        (1<<1)	 /* Overrun error */
-#define  USR2_RDR        (1<<0)	 /* Recv data ready */
-#define  UTS_FRCPERR	 (1<<13) /* Force parity error */
-#define  UTS_LOOP        (1<<12) /* Loop tx and rx */
-#define  UTS_TXEMPTY	 (1<<6)	 /* TxFIFO empty */
-#define  UTS_RXEMPTY	 (1<<5)	 /* RxFIFO empty */
-#define  UTS_TXFULL 	 (1<<4)	 /* TxFIFO full */
-#define  UTS_RXFULL 	 (1<<3)	 /* RxFIFO full */
-#define  UTS_SOFTRST	 (1<<0)	 /* Software reset */
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void serial_setbrg(void)
-{
-	u32 clk = mx31_get_ipg_clk();
-
-	if (!gd->baudrate)
-		gd->baudrate = CONFIG_BAUDRATE;
-
-	__REG(UART_PHYS + UFCR) = 4 << 7; /* divide input clock by 2 */
-	__REG(UART_PHYS + UBIR) = 0xf;
-	__REG(UART_PHYS + UBMR) = clk / (2 * gd->baudrate);
-
-}
-
-int serial_getc(void)
-{
-	while (__REG(UART_PHYS + UTS) & UTS_RXEMPTY);
-	return __REG(UART_PHYS + URXD);
-}
-
-void serial_putc(const char c)
-{
-	__REG(UART_PHYS + UTXD) = c;
-
-	/* wait for transmitter to be ready */
-	while (!(__REG(UART_PHYS + UTS) & UTS_TXEMPTY));
-
-	/* If \n, also do \r */
-	if (c == '\n')
-		serial_putc('\r');
-}
-
-/*
- * Test whether a character is in the RX buffer  */
-int serial_tstc(void)
-{
-	/* If receive fifo is empty, return false */
-	if (__REG(UART_PHYS + UTS) & UTS_RXEMPTY)
-		return 0;
-	return 1;
-}
-
-void serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc(*s++);
-	}
-}
-
-/*
- * Initialise the serial port with the given baudrate. The settings
- * are always 8 data bits, no parity, 1 stop bit, no start bits.
- *
- */
-int serial_init(void)
-{
-	__REG(UART_PHYS + UCR1) = 0x0;
-	__REG(UART_PHYS + UCR2) = 0x0;
-
-	while (!(__REG(UART_PHYS + UCR2) & UCR2_SRST));
-
-	__REG(UART_PHYS + UCR3) = 0x0704;
-	__REG(UART_PHYS + UCR4) = 0x8000;
-	__REG(UART_PHYS + UESC) = 0x002b;
-	__REG(UART_PHYS + UTIM) = 0x0;
-
-	__REG(UART_PHYS + UTS) = 0x0;
-
-	serial_setbrg();
-
-	__REG(UART_PHYS + UCR2) = UCR2_WS | UCR2_IRTS | UCR2_RXEN | \
-					UCR2_TXEN | UCR2_SRST;
-
-	__REG(UART_PHYS + UCR1) = UCR1_UARTEN;
-
-	return 0;
-}
-
-
-#endif /* CONFIG_MX31 */
diff --git a/cpu/arm1136/omap24xx/Makefile b/cpu/arm1136/omap24xx/Makefile
deleted file mode 100644
index 39b0a8281..000000000
--- a/cpu/arm1136/omap24xx/Makefile
+++ /dev/null
@@ -1,46 +0,0 @@
-#
-# (C) Copyright 2000-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundatio; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(SOC).a
-
-COBJS	= interrupts.o
-SOBJS	= start.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
-
-all:	$(obj).depend $(LIB)
-
-$(LIB):	$(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/cpu/arm1136/omap24xx/start.S b/cpu/arm1136/omap24xx/start.S
deleted file mode 100644
index 563431297..000000000
--- a/cpu/arm1136/omap24xx/start.S
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- *  armboot - Startup Code for OMP2420/ARM1136 CPU-core
- *
- *  Copyright (c) 2004	Texas Instruments <r-woodruff2@ti.com>
- *
- *  Copyright (c) 2001	Marius Gr??ger <mag@sysgo.de>
- *  Copyright (c) 2002	Alex Z??pke <azu@sysgo.de>
- *  Copyright (c) 2002	Gary Jennejohn <gj@denx.de>
- *  Copyright (c) 2003	Richard Woodruff <r-woodruff2@ti.com>
- *  Copyright (c) 2003	Kshitij <kshitij@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <asm/arch/omap2420.h>
-
-.globl reset_cpu
-reset_cpu:
-	ldr	r1, rstctl	/* get addr for global reset reg */
-	mov	r3, #0x2	/* full reset pll+mpu */
-	str	r3, [r1]	/* force reset */
-	mov	r0, r0
-_loop_forever:
-	b	_loop_forever
-rstctl:
-	.word	PM_RSTCTRL_WKUP
diff --git a/cpu/arm1136/start.S b/cpu/arm1136/start.S
index 56009d0fb..8b765f1e8 100644
--- a/cpu/arm1136/start.S
+++ b/cpu/arm1136/start.S
@@ -30,6 +30,9 @@
 
 #include <config.h>
 #include <version.h>
+#if !defined(CONFIG_INTEGRATOR) && ! defined(CONFIG_ARCH_CINTEGRATOR)
+#include <asm/arch/omap2420.h>
+#endif
 .globl _start
 _start: b	reset
 #ifdef CONFIG_ONENAND_IPL
@@ -435,4 +438,22 @@ fiq:
 arm1136_cache_flush:
 		mcr	p15, 0, r1, c7, c5, 0	@ invalidate I cache
 		mov	pc, lr			@ back to caller
+
+#if defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_CINTEGRATOR)
+/* Use the IntegratorCP function from board/integratorcp/platform.S */
+#else
+
+	.align	5
+.globl reset_cpu
+reset_cpu:
+	ldr	r1, rstctl	/* get addr for global reset reg */
+	mov	r3, #0x2	/* full reset pll+mpu */
+	str	r3, [r1]	/* force reset */
+	mov	r0, r0
+_loop_forever:
+	b	_loop_forever
+rstctl:
+	.word	PM_RSTCTRL_WKUP
+
+#endif
 #endif	/* CONFIG_ONENAND_IPL */
diff --git a/cpu/arm926ejs/davinci/lowlevel_init.S b/cpu/arm926ejs/davinci/lowlevel_init.S
index 79bc692c1..a87c112ec 100644
--- a/cpu/arm926ejs/davinci/lowlevel_init.S
+++ b/cpu/arm926ejs/davinci/lowlevel_init.S
@@ -3,11 +3,6 @@
  *
  * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
  *
- * Copyright (C) 2008 Prodrive BV <pv@prodrive.nl>
- * Changed:
- * Made board specific defines such as DDR timing and PLL
- * dividers. These should be set in the board config file
- *
  * Partially based on TI sources, original copyrights follow:
  */
 
@@ -161,17 +156,17 @@ WaitPPL2Loop:
 
 	/* Program the PLL Multiplier */
 	ldr	r6, PLL2_PLLM
-	mov	r2, $CFG_DAVINCI_PLL2_PLLM
+	mov	r2, $0x17	/* 162 MHz */
 	str	r2, [r6]
 
 	/* Program the PLL2 Divisor Value */
 	ldr	r6, PLL2_DIV2
-	mov	r3, $CFG_DAVINCI_PLL2_DIV2
+	mov	r3, $0x01
 	str	r3, [r6]
 
 	/* Program the PLL2 Divisor Value */
 	ldr	r6, PLL2_DIV1
-	mov	r4, $CFG_DAVINCI_PLL2_DIV1
+	mov	r4, $0x0b	/* 54 MHz */
 	str	r4, [r6]
 
 	/* PLL2 DIV2 MMR */
@@ -278,7 +273,7 @@ checkDDRStatClkStop:
 	bne	checkDDRStatClkStop
 
 	/*------------------------------------------------------*
-	 * Program DDR2 MMRs					*
+	 * Program DDR2 MMRs for 162MHz Setting			*
 	 *------------------------------------------------------*/
 
 	/* Program PHY Control Register */
@@ -293,12 +288,12 @@ checkDDRStatClkStop:
 
 	/* Program SDRAM TIM-0 Config Register */
 	ldr	r6, SDTIM0
-	ldr	r7, SDTIM0_VAL
+	ldr	r7, SDTIM0_VAL_162MHz
 	str	r7, [r6]
 
 	/* Program SDRAM TIM-1 Config Register */
 	ldr	r6, SDTIM1
-	ldr	r7, SDTIM1_VAL
+	ldr	r7, SDTIM1_VAL_162MHz
 	str	r7, [r6]
 
 	/* Program the SDRAM Bank Config Control Register */
@@ -440,7 +435,7 @@ WaitLoop:
 
 	/* Program the PLL Multiplier */
 	ldr	r6, PLL1_PLLM
-	mov	r3, $CFG_DAVINCI_PLL1_PLLM
+	mov	r3, $0x15	/* For 594MHz */
 	str	r3, [r6]
 
 	/* Wait for PLL to Reset Properly */
@@ -472,7 +467,7 @@ PLL1Lock:
 	nop
 
 	/*------------------------------------------------------*
-	 * AEMIF configuration for NAND/NOR Flash		*
+	 * AEMIF configuration for NOR Flash (double check)     *
 	 *------------------------------------------------------*/
 	ldr	r0, _PINMUX0
 	ldr	r1, _DEV_SETTING
@@ -484,12 +479,6 @@ PLL1Lock:
 	orr	r2, r2, r1
 	str	r2, [r0]
 
-	ldr	r0, ACFG2
-	ldr	r1, ACFG2_VAL
-	ldr	r2, [r0]
-	and	r1, r2, r1
-	str	r1, [r0]
-
 	ldr	r0, ACFG3
 	ldr	r1, ACFG3_VAL
 	ldr	r2, [r0]
@@ -508,12 +497,6 @@ PLL1Lock:
 	and	r1, r2, r1
 	str	r1, [r0]
 
-	ldr	r0, NANDFCR
-	ldr	r1, NANDFCR_VAL
-	ldr	r2, [r0]
-	and	r1, r2, r1
-	str	r1, [r0]
-
 	/*--------------------------------------*
 	 * VTP manual Calibration               *
 	 *--------------------------------------*/
@@ -577,36 +560,24 @@ _PINMUX1:
 	.word	0x01c40004		/* Device Configuration Registers */
 
 _DEV_SETTING:
-	.word	CFG_DAVINCI_PINMUX_0
+	.word	0x00000c1f
 
 WAITCFG:
 	.word	0x01e00004
 WAITCFG_VAL:
-	.word	CFG_DAVINCI_WAITCFG
-ACFG2:
-	.word	0x01e00010
-ACFG2_VAL:
-	.word	CFG_DAVINCI_ACFG2
+	.word	0
 ACFG3:
 	.word	0x01e00014
 ACFG3_VAL:
-	.word	CFG_DAVINCI_ACFG3
+	.word	0x3ffffffd
 ACFG4:
 	.word	0x01e00018
 ACFG4_VAL:
-	.word	CFG_DAVINCI_ACFG4
+	.word	0x3ffffffd
 ACFG5:
 	.word	0x01e0001c
 ACFG5_VAL:
-	.word	CFG_DAVINCI_ACFG5
-NANDFCR:
-	.word	0x01e00060
-NANDFCR_VAL:
-#ifdef CFG_DAVINCI_NANDCE
-	.word	(1 << (CFG_DAVINCI_NANDCE - 2))
-#else
-	.word	0x00000000
-#endif
+	.word	0x3ffffffd
 
 MDCTL_DDR2:
 	.word	0x01c41a34
@@ -628,27 +599,33 @@ PSC_FLAG_CLEAR:
 PSC_GEM_FLAG_CLEAR:
 	.word	0xfffffeff
 
-/* DDR2 MMR & CONFIGURATION VALUES */
+/* DDR2 MMR & CONFIGURATION VALUES, 162 MHZ clock */
 DDRCTL:
 	.word	0x200000e4
 DDRCTL_VAL:
-	.word	CFG_DAVINCI_DDRCTL
+	.word	0x50006405
 SDREF:
 	.word	0x2000000c
 SDREF_VAL:
-	.word	CFG_DAVINCI_SDREF
+	.word	0x000005c3
 SDCFG:
 	.word	0x20000008
 SDCFG_VAL:
-	.word	CFG_DAVINCI_SDCFG
+#ifdef	DDR_4BANKS
+	.word	0x00178622
+#elif defined DDR_8BANKS
+	.word	0x00178632
+#else
+#error "Unknown DDR configuration!!!"
+#endif
 SDTIM0:
 	.word	0x20000010
-SDTIM0_VAL:
-	.word	CFG_DAVINCI_SDTIM0
+SDTIM0_VAL_162MHz:
+	.word	0x28923211
 SDTIM1:
 	.word	0x20000014
-SDTIM1_VAL:
-	.word	CFG_DAVINCI_SDTIM1
+SDTIM1_VAL_162MHz:
+	.word	0x0016c722
 VTPIOCR:
 	.word	0x200000f0	/* VTP IO Control register */
 DDRVTPR:
@@ -722,7 +699,7 @@ PLL2_DIV_MASK:
 MMARG_BRF0:
 	.word	0x01c42010	/* BRF margin mode 0 (R/W)*/
 MMARG_BRF0_VAL:
-	.word	CFG_DAVINCI_MMARG_BRF0
+	.word	0x00444400
 
 DDR2_START_ADDR:
 	.word	0x80000000
diff --git a/cpu/arm926ejs/davinci/nand.c b/cpu/arm926ejs/davinci/nand.c
index 3257f83a2..127be9fcd 100644
--- a/cpu/arm926ejs/davinci/nand.c
+++ b/cpu/arm926ejs/davinci/nand.c
@@ -117,7 +117,7 @@ static void nand_davinci_enable_hwecc(struct mtd_info *mtd, int mode)
 	dummy = emif_addr->NANDF3ECC;
 	dummy = emif_addr->NANDF4ECC;
 
-	emif_addr->NANDFCR |= (1 << (CFG_DAVINCI_NANDCE + 6));
+	emif_addr->NANDFCR |= (1 << 8);
 }
 
 static u_int32_t nand_davinci_readecc(struct mtd_info *mtd, u_int32_t region)
@@ -147,7 +147,7 @@ static int nand_davinci_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u
 
 	n = (this->eccmode == NAND_ECC_HW12_2048) ? 4 : 1;
 
-	region = (CFG_DAVINCI_NANDCE - 1);
+	region = 1;
 	while (n--) {
 		tmp = nand_davinci_readecc(mtd, region);
 		*ecc_code++ = tmp;
@@ -311,9 +311,40 @@ static int nand_davinci_waitfunc(struct mtd_info *mtd, struct nand_chip *this, i
 
 static void nand_flash_init(void)
 {
-	/* All EMIF initialization is done in lowlevel_init.S
-	 * and config values are in the board config files
-	 */
+	u_int32_t	acfg1 = 0x3ffffffc;
+	u_int32_t	acfg2 = 0x3ffffffc;
+	u_int32_t	acfg3 = 0x3ffffffc;
+	u_int32_t	acfg4 = 0x3ffffffc;
+	emifregs	emif_regs;
+
+	/*------------------------------------------------------------------*
+	 *  NAND FLASH CHIP TIMEOUT @ 459 MHz                               *
+	 *                                                                  *
+	 *  AEMIF.CLK freq   = PLL1/6 = 459/6 = 76.5 MHz                    *
+	 *  AEMIF.CLK period = 1/76.5 MHz = 13.1 ns                         *
+	 *                                                                  *
+	 *------------------------------------------------------------------*/
+	 acfg1 = 0
+	 	| (0 << 31 )	/* selectStrobe */
+	 	| (0 << 30 )	/* extWait */
+	 	| (1 << 26 )	/* writeSetup	10 ns */
+	 	| (3 << 20 )	/* writeStrobe	40 ns */
+	 	| (1 << 17 )	/* writeHold	10 ns */
+	 	| (1 << 13 )	/* readSetup	10 ns */
+	 	| (5 << 7 )	/* readStrobe	60 ns */
+	 	| (1 << 4 )	/* readHold	10 ns */
+	 	| (3 << 2 )	/* turnAround	?? ns */
+	 	| (0 << 0 )	/* asyncSize	8-bit bus */
+	 	;
+
+	emif_regs = (emifregs)DAVINCI_ASYNC_EMIF_CNTRL_BASE;
+
+	emif_regs->AWCCR |= 0x10000000;
+	emif_regs->AB1CR = acfg1;	/* 0x08244128 */;
+	emif_regs->AB2CR = acfg2;
+	emif_regs->AB3CR = acfg3;
+	emif_regs->AB4CR = acfg4;
+	emif_regs->NANDFCR = 0x00000101;
 }
 
 int board_nand_init(struct nand_chip *nand)
diff --git a/cpu/arm926ejs/davinci/timer.c b/cpu/arm926ejs/davinci/timer.c
index 4797797b6..8bb8b4571 100644
--- a/cpu/arm926ejs/davinci/timer.c
+++ b/cpu/arm926ejs/davinci/timer.c
@@ -42,9 +42,9 @@
 
 typedef volatile struct {
 	u_int32_t	pid12;
-	u_int32_t	emumgt;
-	u_int32_t	na1;
-	u_int32_t	na2;
+	u_int32_t	emumgt_clksped;
+	u_int32_t	gpint_en;
+	u_int32_t	gpdir_dat;
 	u_int32_t	tim12;
 	u_int32_t	tim34;
 	u_int32_t	prd12;
@@ -52,12 +52,21 @@ typedef volatile struct {
 	u_int32_t	tcr;
 	u_int32_t	tgcr;
 	u_int32_t	wdtcr;
+	u_int32_t	tlgc;
+	u_int32_t	tlmr;
 } davinci_timer;
 
 davinci_timer		*timer = (davinci_timer *)CFG_TIMERBASE;
 
 #define TIMER_LOAD_VAL	(CFG_HZ_CLOCK / CFG_HZ)
-#define TIM_CLK_DIV	16
+#define READ_TIMER	timer->tim34
+
+/*
+ * Timer runs with CFG_HZ_CLOCK, currently 27MHz. To avoid wrap
+ * around of timestamp already after min ~159s, divide it, e.g. by 16.
+ * timestamp will then wrap around all min ~42min
+ */
+#define DIV(x)		((x) >> 4)
 
 static ulong timestamp;
 static ulong lastinc;
@@ -67,50 +76,63 @@ int timer_init(void)
 	/* We are using timer34 in unchained 32-bit mode, full speed */
 	timer->tcr = 0x0;
 	timer->tgcr = 0x0;
-	timer->tgcr = 0x06 | ((TIM_CLK_DIV - 1) << 8);
+	timer->tgcr = 0x06;
 	timer->tim34 = 0x0;
 	timer->prd34 = TIMER_LOAD_VAL;
 	lastinc = 0;
+	timer->tcr = 0x80 << 16;
 	timestamp = 0;
-	timer->tcr = 2 << 22;
 
 	return(0);
 }
 
 void reset_timer(void)
 {
-	timer->tcr = 0x0;
-	timer->tim34 = 0;
-	lastinc = 0;
+	reset_timer_masked();
+}
+
+ulong get_timer(ulong base)
+{
+	return(get_timer_masked() - base);
+}
+
+void set_timer(ulong t)
+{
+	timestamp = t;
+}
+
+void udelay(unsigned long usec)
+{
+	udelay_masked(usec);
+}
+
+void reset_timer_masked(void)
+{
+	lastinc = DIV(READ_TIMER);
 	timestamp = 0;
-	timer->tcr = 2 << 22;
 }
 
-static ulong get_timer_raw(void)
+ulong get_timer_raw(void)
 {
-	ulong now = timer->tim34;
+	ulong now = DIV(READ_TIMER);
 
 	if (now >= lastinc) {
 		/* normal mode */
 		timestamp += now - lastinc;
 	} else {
 		/* overflow ... */
-		timestamp += now + TIMER_LOAD_VAL - lastinc;
+		timestamp += now + DIV(TIMER_LOAD_VAL) - lastinc;
 	}
 	lastinc = now;
 	return timestamp;
 }
 
-ulong get_timer(ulong base)
-{
-	return((get_timer_raw() / (TIMER_LOAD_VAL / TIM_CLK_DIV)) - base); }
-
-void set_timer(ulong t)
+ulong get_timer_masked(void)
 {
-	timestamp = t;
+	return(get_timer_raw() / DIV(TIMER_LOAD_VAL));
 }
 
-void udelay(unsigned long usec)
+void udelay_masked(unsigned long usec)
 {
 	ulong tmo;
 	ulong endtime;
@@ -118,7 +140,7 @@ void udelay(unsigned long usec)
 
 	tmo = CFG_HZ_CLOCK / 1000;
 	tmo *= usec;
-	tmo /= (1000 * TIM_CLK_DIV);
+	tmo /= 1000;
 
 	endtime = get_timer_raw() + tmo;
 
@@ -143,5 +165,8 @@ unsigned long long get_ticks(void)
  */
 ulong get_tbclk(void)
 {
-	return CFG_HZ;
+	ulong tbclk;
+
+	tbclk = CFG_HZ;
+	return(tbclk);
 }
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index 071ef00b1..29d6c03db 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -29,7 +29,6 @@ COBJS-y += fsl_i2c.o
 COBJS-y += omap1510_i2c.o
 COBJS-y += omap24xx_i2c.o
 COBJS-y += tsi108_i2c.o
-COBJS-y += mxc_i2c.o
 
 COBJS	:= $(COBJS-y)
 SRCS 	:= $(COBJS:.o=.c)
diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c
deleted file mode 100644
index 3c2a9cf18..000000000
--- a/drivers/i2c/mxc_i2c.c
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * i2c driver for Freescale mx31
- *
- * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#if defined(CONFIG_HARD_I2C) && defined(CONFIG_I2C_MXC)
-
-#include <asm/arch/mx31.h>
-#include <asm/arch/mx31-regs.h>
-
-#define IADR	0x00
-#define IFDR	0x04
-#define I2CR	0x08
-#define I2SR	0x0c
-#define I2DR	0x10
-
-#define I2CR_IEN	(1 << 7)
-#define I2CR_IIEN	(1 << 6)
-#define I2CR_MSTA	(1 << 5)
-#define I2CR_MTX	(1 << 4)
-#define I2CR_TX_NO_AK	(1 << 3)
-#define I2CR_RSTA	(1 << 2)
-
-#define I2SR_ICF	(1 << 7)
-#define I2SR_IBB	(1 << 5)
-#define I2SR_IIF	(1 << 1)
-#define I2SR_RX_NO_AK	(1 << 0)
-
-#ifdef CFG_I2C_MX31_PORT1
-#define I2C_BASE	0x43f80000
-#elif defined(CFG_I2C_MX31_PORT2)
-#define I2C_BASE	0x43f98000
-#elif defined(CFG_I2C_MX31_PORT3)
-#define I2C_BASE	0x43f84000
-#else
-#error "define CFG_I2C_MX31_PORTx to use the mx31 I2C driver"
-#endif
-
-#ifdef DEBUG
-#define DPRINTF(args...)  printf(args)
-#else
-#define DPRINTF(args...)
-#endif
-
-static u16 div[] = { 30, 32, 36, 42, 48, 52, 60, 72, 80, 88, 104, 128, 144,
-			160, 192, 240, 288, 320, 384, 480, 576, 640, 768, 960,
-			1152, 1280, 1536, 1920, 2304, 2560, 3072, 3840};
-
-void i2c_init(int speed, int unused)
-{
-	int freq = mx31_get_ipg_clk();
-	int i;
-
-	for (i = 0; i < 0x1f; i++)
-		if (freq / div[i] <= speed)
-			break;
-
-	DPRINTF("%s: speed: %d\n", __FUNCTION__, speed);
-
-	__REG16(I2C_BASE + I2CR) = 0; /* Reset module */
-	__REG16(I2C_BASE + IFDR) = i;
-	__REG16(I2C_BASE + I2CR) = I2CR_IEN;
-	__REG16(I2C_BASE + I2SR) = 0;
-}
-
-static int wait_busy(void)
-{
-	int timeout = 10000;
-
-	while (!(__REG16(I2C_BASE + I2SR) & I2SR_IIF) && --timeout)
-		udelay(1);
-	__REG16(I2C_BASE + I2SR) = 0; /* clear interrupt */
-
-	return timeout;
-}
-
-static int tx_byte(u8 byte)
-{
-	__REG16(I2C_BASE + I2DR) = byte;
-
-	if (!wait_busy() || __REG16(I2C_BASE + I2SR) & I2SR_RX_NO_AK)
-		return -1;
-	return 0;
-}
-
-static int rx_byte(void)
-{
-	if (!wait_busy())
-		return -1;
-
-	return __REG16(I2C_BASE + I2DR);
-}
-
-int i2c_probe(uchar chip)
-{
-	int ret;
-
-	__REG16(I2C_BASE + I2CR) = 0; /* Reset module */
-	__REG16(I2C_BASE + I2CR) = I2CR_IEN;
-
-	__REG16(I2C_BASE + I2CR) = I2CR_IEN |  I2CR_MSTA | I2CR_MTX;
-	ret = tx_byte(chip << 1);
-	__REG16(I2C_BASE + I2CR) = I2CR_IEN | I2CR_MTX;
-
-	return ret;
-}
-
-static int i2c_addr(uchar chip, uint addr, int alen)
-{
-	__REG16(I2C_BASE + I2SR) = 0; /* clear interrupt */
-	__REG16(I2C_BASE + I2CR) = I2CR_IEN |  I2CR_MSTA | I2CR_MTX;
-
-	if (tx_byte(chip << 1))
-		return -1;
-
-	while (alen--)
-		if (tx_byte((addr >> (alen * 8)) & 0xff))
-			return -1;
-	return 0;
-}
-
-int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len)
-{
-	int timeout = 10000;
-	int ret;
-
-	DPRINTF("%s chip: 0x%02x addr: 0x%04x alen: %d len: +%d\n", \
-				__FUNCTION__, chip, addr, alen, len);
-
-	if (i2c_addr(chip, addr, alen)) {
-		printf("i2c_addr failed\n");
-		return -1;
-	}
-
-	__REG16(I2C_BASE + I2CR) = I2CR_IEN |  I2CR_MSTA |	\
-					I2CR_MTX | I2CR_RSTA;
-
-	if (tx_byte(chip << 1 | 1))
-		return -1;
-
-	__REG16(I2C_BASE + I2CR) = I2CR_IEN |  I2CR_MSTA | ((len == 1)	\
-							? I2CR_TX_NO_AK : 0);
-
-	ret = __REG16(I2C_BASE + I2DR);
-
-	while (len--) {
-		if ((ret = rx_byte()) < 0)
-			return -1;
-		*buf++ = ret;
-		if (len <= 1)
-			__REG16(I2C_BASE + I2CR) = I2CR_IEN |	\
-					I2CR_MSTA | I2CR_TX_NO_AK;
-	}
-
-	wait_busy();
-
-	__REG16(I2C_BASE + I2CR) = I2CR_IEN;
-
-	while (__REG16(I2C_BASE + I2SR) & I2SR_IBB && --timeout)
-		udelay(1);
-
-	return 0;
-}
-
-int i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len)
-{
-	int timeout = 10000;
-	DPRINTF("%s chip: 0x%02x addr: 0x%04x alen: %d len: %d\n",	\
-					__FUNCTION__, chip, addr, alen, len);
-
-	if (i2c_addr(chip, addr, alen))
-		return -1;
-
-	while (len--)
-		if (tx_byte(*buf++))
-			return -1;
-
-	__REG16(I2C_BASE + I2CR) = I2CR_IEN;
-
-	while (__REG16(I2C_BASE + I2SR) & I2SR_IBB && --timeout)
-		udelay(1);
-
-	return 0;
-}
-
-#endif /* CONFIG_HARD_I2C */
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 6f0225b58..eafd26700 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -55,7 +55,6 @@ COBJS-y += rtl8139.o
 COBJS-y += rtl8169.o
 COBJS-y += s3c4510b_eth.o
 COBJS-y += smc91111.o
-COBJS-y += smc911x.o
 COBJS-y += tigon3.o
 COBJS-y += tsec.o
 COBJS-y += tsi108_eth.o
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
deleted file mode 100644
index 2fd577779..000000000
--- a/drivers/net/smc911x.c
+++ /dev/null
@@ -1,680 +0,0 @@
-/*
- * SMSC LAN9[12]1[567] Network driver
- *
- * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#ifdef CONFIG_DRIVER_SMC911X
-
-#include <command.h>
-#include <net.h>
-#include <miiphy.h>
-
-#define mdelay(n)       udelay((n)*1000)
-
-#define __REG(x)     (*((volatile u32 *)(x)))
-
-/* Below are the register offsets and bit definitions
- * of the Lan911x memory space
- */
-#define RX_DATA_FIFO		 __REG(CONFIG_DRIVER_SMC911X_BASE + 0x00)
-
-#define TX_DATA_FIFO		 __REG(CONFIG_DRIVER_SMC911X_BASE + 0x20)
-#define	TX_CMD_A_INT_ON_COMP			(0x80000000)
-#define	TX_CMD_A_INT_BUF_END_ALGN		(0x03000000)
-#define	TX_CMD_A_INT_4_BYTE_ALGN		(0x00000000)
-#define	TX_CMD_A_INT_16_BYTE_ALGN		(0x01000000)
-#define	TX_CMD_A_INT_32_BYTE_ALGN		(0x02000000)
-#define	TX_CMD_A_INT_DATA_OFFSET		(0x001F0000)
-#define	TX_CMD_A_INT_FIRST_SEG			(0x00002000)
-#define	TX_CMD_A_INT_LAST_SEG			(0x00001000)
-#define	TX_CMD_A_BUF_SIZE			(0x000007FF)
-#define	TX_CMD_B_PKT_TAG			(0xFFFF0000)
-#define	TX_CMD_B_ADD_CRC_DISABLE		(0x00002000)
-#define	TX_CMD_B_DISABLE_PADDING		(0x00001000)
-#define	TX_CMD_B_PKT_BYTE_LENGTH		(0x000007FF)
-
-#define RX_STATUS_FIFO		__REG(CONFIG_DRIVER_SMC911X_BASE + 0x40)
-#define	RX_STS_PKT_LEN				(0x3FFF0000)
-#define	RX_STS_ES				(0x00008000)
-#define	RX_STS_BCST				(0x00002000)
-#define	RX_STS_LEN_ERR				(0x00001000)
-#define	RX_STS_RUNT_ERR				(0x00000800)
-#define	RX_STS_MCAST				(0x00000400)
-#define	RX_STS_TOO_LONG				(0x00000080)
-#define	RX_STS_COLL				(0x00000040)
-#define	RX_STS_ETH_TYPE				(0x00000020)
-#define	RX_STS_WDOG_TMT				(0x00000010)
-#define	RX_STS_MII_ERR				(0x00000008)
-#define	RX_STS_DRIBBLING			(0x00000004)
-#define	RX_STS_CRC_ERR				(0x00000002)
-#define RX_STATUS_FIFO_PEEK 	__REG(CONFIG_DRIVER_SMC911X_BASE + 0x44)
-#define TX_STATUS_FIFO		__REG(CONFIG_DRIVER_SMC911X_BASE + 0x48)
-#define	TX_STS_TAG				(0xFFFF0000)
-#define	TX_STS_ES				(0x00008000)
-#define	TX_STS_LOC				(0x00000800)
-#define	TX_STS_NO_CARR				(0x00000400)
-#define	TX_STS_LATE_COLL			(0x00000200)
-#define	TX_STS_MANY_COLL			(0x00000100)
-#define	TX_STS_COLL_CNT				(0x00000078)
-#define	TX_STS_MANY_DEFER			(0x00000004)
-#define	TX_STS_UNDERRUN				(0x00000002)
-#define	TX_STS_DEFERRED				(0x00000001)
-#define TX_STATUS_FIFO_PEEK	__REG(CONFIG_DRIVER_SMC911X_BASE + 0x4C)
-#define ID_REV			__REG(CONFIG_DRIVER_SMC911X_BASE + 0x50)
-#define	ID_REV_CHIP_ID				(0xFFFF0000)  /* RO */
-#define	ID_REV_REV_ID				(0x0000FFFF)  /* RO */
-
-#define INT_CFG			__REG(CONFIG_DRIVER_SMC911X_BASE + 0x54)
-#define	INT_CFG_INT_DEAS			(0xFF000000)  /* R/W */
-#define	INT_CFG_INT_DEAS_CLR			(0x00004000)
-#define	INT_CFG_INT_DEAS_STS			(0x00002000)
-#define	INT_CFG_IRQ_INT				(0x00001000)  /* RO */
-#define	INT_CFG_IRQ_EN				(0x00000100)  /* R/W */
-#define	INT_CFG_IRQ_POL				(0x00000010)  /* R/W */
-						/* Not Affected by SW Reset */
-#define	INT_CFG_IRQ_TYPE			(0x00000001)  /* R/W */
-						/* Not Affected by SW Reset */
-
-#define INT_STS			__REG(CONFIG_DRIVER_SMC911X_BASE + 0x58)
-#define	INT_STS_SW_INT				(0x80000000)  /* R/WC */
-#define	INT_STS_TXSTOP_INT			(0x02000000)  /* R/WC */
-#define	INT_STS_RXSTOP_INT			(0x01000000)  /* R/WC */
-#define	INT_STS_RXDFH_INT			(0x00800000)  /* R/WC */
-#define	INT_STS_RXDF_INT			(0x00400000)  /* R/WC */
-#define	INT_STS_TX_IOC				(0x00200000)  /* R/WC */
-#define	INT_STS_RXD_INT				(0x00100000)  /* R/WC */
-#define	INT_STS_GPT_INT				(0x00080000)  /* R/WC */
-#define	INT_STS_PHY_INT				(0x00040000)  /* RO */
-#define	INT_STS_PME_INT				(0x00020000)  /* R/WC */
-#define	INT_STS_TXSO				(0x00010000)  /* R/WC */
-#define	INT_STS_RWT				(0x00008000)  /* R/WC */
-#define	INT_STS_RXE				(0x00004000)  /* R/WC */
-#define	INT_STS_TXE				(0x00002000)  /* R/WC */
-/*#define	INT_STS_ERX		(0x00001000)*/  /* R/WC */
-#define	INT_STS_TDFU				(0x00000800)  /* R/WC */
-#define	INT_STS_TDFO				(0x00000400)  /* R/WC */
-#define	INT_STS_TDFA				(0x00000200)  /* R/WC */
-#define	INT_STS_TSFF				(0x00000100)  /* R/WC */
-#define	INT_STS_TSFL				(0x00000080)  /* R/WC */
-/*#define	INT_STS_RXDF		(0x00000040)*/  /* R/WC */
-#define	INT_STS_RDFO				(0x00000040)  /* R/WC */
-#define	INT_STS_RDFL				(0x00000020)  /* R/WC */
-#define	INT_STS_RSFF				(0x00000010)  /* R/WC */
-#define	INT_STS_RSFL				(0x00000008)  /* R/WC */
-#define	INT_STS_GPIO2_INT			(0x00000004)  /* R/WC */
-#define	INT_STS_GPIO1_INT			(0x00000002)  /* R/WC */
-#define	INT_STS_GPIO0_INT			(0x00000001)  /* R/WC */
-#define INT_EN			__REG(CONFIG_DRIVER_SMC911X_BASE + 0x5C)
-#define	INT_EN_SW_INT_EN			(0x80000000)  /* R/W */
-#define	INT_EN_TXSTOP_INT_EN			(0x02000000)  /* R/W */
-#define	INT_EN_RXSTOP_INT_EN			(0x01000000)  /* R/W */
-#define	INT_EN_RXDFH_INT_EN			(0x00800000)  /* R/W */
-/*#define	INT_EN_RXDF_INT_EN		(0x00400000)*/  /* R/W */
-#define	INT_EN_TIOC_INT_EN			(0x00200000)  /* R/W */
-#define	INT_EN_RXD_INT_EN			(0x00100000)  /* R/W */
-#define	INT_EN_GPT_INT_EN			(0x00080000)  /* R/W */
-#define	INT_EN_PHY_INT_EN			(0x00040000)  /* R/W */
-#define	INT_EN_PME_INT_EN			(0x00020000)  /* R/W */
-#define	INT_EN_TXSO_EN				(0x00010000)  /* R/W */
-#define	INT_EN_RWT_EN				(0x00008000)  /* R/W */
-#define	INT_EN_RXE_EN				(0x00004000)  /* R/W */
-#define	INT_EN_TXE_EN				(0x00002000)  /* R/W */
-/*#define	INT_EN_ERX_EN			(0x00001000)*/  /* R/W */
-#define	INT_EN_TDFU_EN				(0x00000800)  /* R/W */
-#define	INT_EN_TDFO_EN				(0x00000400)  /* R/W */
-#define	INT_EN_TDFA_EN				(0x00000200)  /* R/W */
-#define	INT_EN_TSFF_EN				(0x00000100)  /* R/W */
-#define	INT_EN_TSFL_EN				(0x00000080)  /* R/W */
-/*#define	INT_EN_RXDF_EN			(0x00000040)*/  /* R/W */
-#define	INT_EN_RDFO_EN				(0x00000040)  /* R/W */
-#define	INT_EN_RDFL_EN				(0x00000020)  /* R/W */
-#define	INT_EN_RSFF_EN				(0x00000010)  /* R/W */
-#define	INT_EN_RSFL_EN				(0x00000008)  /* R/W */
-#define	INT_EN_GPIO2_INT			(0x00000004)  /* R/W */
-#define	INT_EN_GPIO1_INT			(0x00000002)  /* R/W */
-#define	INT_EN_GPIO0_INT			(0x00000001)  /* R/W */
-
-#define BYTE_TEST		__REG(CONFIG_DRIVER_SMC911X_BASE + 0x64)
-#define FIFO_INT		__REG(CONFIG_DRIVER_SMC911X_BASE + 0x68)
-#define	FIFO_INT_TX_AVAIL_LEVEL			(0xFF000000)  /* R/W */
-#define	FIFO_INT_TX_STS_LEVEL			(0x00FF0000)  /* R/W */
-#define	FIFO_INT_RX_AVAIL_LEVEL			(0x0000FF00)  /* R/W */
-#define	FIFO_INT_RX_STS_LEVEL			(0x000000FF)  /* R/W */
-
-#define RX_CFG			__REG(CONFIG_DRIVER_SMC911X_BASE + 0x6C)
-#define	RX_CFG_RX_END_ALGN			(0xC0000000)  /* R/W */
-#define		RX_CFG_RX_END_ALGN4		(0x00000000)  /* R/W */
-#define		RX_CFG_RX_END_ALGN16		(0x40000000)  /* R/W */
-#define		RX_CFG_RX_END_ALGN32		(0x80000000)  /* R/W */
-#define	RX_CFG_RX_DMA_CNT			(0x0FFF0000)  /* R/W */
-#define	RX_CFG_RX_DUMP				(0x00008000)  /* R/W */
-#define	RX_CFG_RXDOFF				(0x00001F00)  /* R/W */
-/*#define	RX_CFG_RXBAD			(0x00000001)*/  /* R/W */
-
-#define TX_CFG			__REG(CONFIG_DRIVER_SMC911X_BASE + 0x70)
-/*#define	TX_CFG_TX_DMA_LVL		(0xE0000000)*/	 /* R/W */
-/*#define	TX_CFG_TX_DMA_CNT		(0x0FFF0000)*/	 /* R/W */
-							/* Self Clearing */
-#define	TX_CFG_TXS_DUMP				(0x00008000)
-							/* Self Clearing */
-#define	TX_CFG_TXD_DUMP				(0x00004000)
-							/* Self Clearing */
-#define	TX_CFG_TXSAO				(0x00000004)  /* R/W */
-#define	TX_CFG_TX_ON				(0x00000002)  /* R/W */
-#define	TX_CFG_STOP_TX				(0x00000001)
-							/* Self Clearing */
-
-#define HW_CFG			__REG(CONFIG_DRIVER_SMC911X_BASE + 0x74)
-#define	HW_CFG_TTM				(0x00200000)  /* R/W */
-#define	HW_CFG_SF				(0x00100000)  /* R/W */
-#define	HW_CFG_TX_FIF_SZ			(0x000F0000)  /* R/W */
-#define	HW_CFG_TR				(0x00003000)  /* R/W */
-#define	HW_CFG_PHY_CLK_SEL			(0x00000060)  /* R/W */
-#define	HW_CFG_PHY_CLK_SEL_INT_PHY 		(0x00000000) /* R/W */
-#define	HW_CFG_PHY_CLK_SEL_EXT_PHY 		(0x00000020) /* R/W */
-#define	HW_CFG_PHY_CLK_SEL_CLK_DIS 		(0x00000040) /* R/W */
-#define	HW_CFG_SMI_SEL				(0x00000010)  /* R/W */
-#define	HW_CFG_EXT_PHY_DET			(0x00000008)  /* RO */
-#define	HW_CFG_EXT_PHY_EN			(0x00000004)  /* R/W */
-#define	HW_CFG_32_16_BIT_MODE			(0x00000004)  /* RO */
-#define	HW_CFG_SRST_TO				(0x00000002)  /* RO */
-#define	HW_CFG_SRST				(0x00000001)
-							/* Self Clearing */
-
-#define RX_DP_CTRL		__REG(CONFIG_DRIVER_SMC911X_BASE + 0x78)
-#define	RX_DP_CTRL_RX_FFWD			(0x80000000)  /* R/W */
-#define	RX_DP_CTRL_FFWD_BUSY			(0x80000000)  /* RO */
-
-#define RX_FIFO_INF		__REG(CONFIG_DRIVER_SMC911X_BASE + 0x7C)
-#define	 RX_FIFO_INF_RXSUSED			(0x00FF0000)  /* RO */
-#define	 RX_FIFO_INF_RXDUSED			(0x0000FFFF)  /* RO */
-
-#define TX_FIFO_INF		__REG(CONFIG_DRIVER_SMC911X_BASE + 0x80)
-#define	TX_FIFO_INF_TSUSED			(0x00FF0000)  /* RO */
-#define	TX_FIFO_INF_TDFREE			(0x0000FFFF)  /* RO */
-
-#define PMT_CTRL		__REG(CONFIG_DRIVER_SMC911X_BASE + 0x84)
-#define	PMT_CTRL_PM_MODE			(0x00003000)
-							/* Self Clearing */
-#define	PMT_CTRL_PHY_RST			(0x00000400)
-							/* Self Clearing */
-#define	PMT_CTRL_WOL_EN				(0x00000200)  /* R/W */
-#define	PMT_CTRL_ED_EN				(0x00000100)  /* R/W */
-#define	PMT_CTRL_PME_TYPE			(0x00000040)  /* R/W */
-						/* Not Affected by SW Reset */
-#define	PMT_CTRL_WUPS				(0x00000030)  /* R/WC */
-#define	PMT_CTRL_WUPS_NOWAKE			(0x00000000)  /* R/WC */
-#define	PMT_CTRL_WUPS_ED			(0x00000010)  /* R/WC */
-#define	PMT_CTRL_WUPS_WOL			(0x00000020)  /* R/WC */
-#define	PMT_CTRL_WUPS_MULTI			(0x00000030)  /* R/WC */
-#define	PMT_CTRL_PME_IND			(0x00000008)  /* R/W */
-#define	PMT_CTRL_PME_POL			(0x00000004)  /* R/W */
-#define	PMT_CTRL_PME_EN				(0x00000002)  /* R/W */
-						/* Not Affected by SW Reset */
-#define	PMT_CTRL_READY				(0x00000001)  /* RO */
-
-#define GPIO_CFG		__REG(CONFIG_DRIVER_SMC911X_BASE + 0x88)
-#define	GPIO_CFG_LED3_EN			(0x40000000)  /* R/W */
-#define	GPIO_CFG_LED2_EN			(0x20000000)  /* R/W */
-#define	GPIO_CFG_LED1_EN			(0x10000000)  /* R/W */
-#define	GPIO_CFG_GPIO2_INT_POL			(0x04000000)  /* R/W */
-#define	GPIO_CFG_GPIO1_INT_POL			(0x02000000)  /* R/W */
-#define	GPIO_CFG_GPIO0_INT_POL			(0x01000000)  /* R/W */
-#define	GPIO_CFG_EEPR_EN			(0x00700000)  /* R/W */
-#define	GPIO_CFG_GPIOBUF2			(0x00040000)  /* R/W */
-#define	GPIO_CFG_GPIOBUF1			(0x00020000)  /* R/W */
-#define	GPIO_CFG_GPIOBUF0			(0x00010000)  /* R/W */
-#define	GPIO_CFG_GPIODIR2			(0x00000400)  /* R/W */
-#define	GPIO_CFG_GPIODIR1			(0x00000200)  /* R/W */
-#define	GPIO_CFG_GPIODIR0			(0x00000100)  /* R/W */
-#define	GPIO_CFG_GPIOD4				(0x00000010)  /* R/W */
-#define	GPIO_CFG_GPIOD3				(0x00000008)  /* R/W */
-#define	GPIO_CFG_GPIOD2				(0x00000004)  /* R/W */
-#define	GPIO_CFG_GPIOD1				(0x00000002)  /* R/W */
-#define	GPIO_CFG_GPIOD0				(0x00000001)  /* R/W */
-
-#define GPT_CFG			__REG(CONFIG_DRIVER_SMC911X_BASE + 0x8C)
-#define	GPT_CFG_TIMER_EN			(0x20000000)  /* R/W */
-#define	GPT_CFG_GPT_LOAD			(0x0000FFFF)  /* R/W */
-
-#define GPT_CNT			__REG(CONFIG_DRIVER_SMC911X_BASE + 0x90)
-#define	GPT_CNT_GPT_CNT				(0x0000FFFF)  /* RO */
-
-#define ENDIAN			__REG(CONFIG_DRIVER_SMC911X_BASE + 0x98)
-#define FREE_RUN		__REG(CONFIG_DRIVER_SMC911X_BASE + 0x9C)
-#define RX_DROP			__REG(CONFIG_DRIVER_SMC911X_BASE + 0xA0)
-#define MAC_CSR_CMD		__REG(CONFIG_DRIVER_SMC911X_BASE + 0xA4)
-#define	 MAC_CSR_CMD_CSR_BUSY			(0x80000000)
-							/* Self Clearing */
-#define	 MAC_CSR_CMD_R_NOT_W			(0x40000000)  /* R/W */
-#define	 MAC_CSR_CMD_CSR_ADDR			(0x000000FF)  /* R/W */
-
-#define MAC_CSR_DATA		__REG(CONFIG_DRIVER_SMC911X_BASE + 0xA8)
-#define AFC_CFG			__REG(CONFIG_DRIVER_SMC911X_BASE + 0xAC)
-#define		AFC_CFG_AFC_HI			(0x00FF0000)  /* R/W */
-#define		AFC_CFG_AFC_LO			(0x0000FF00)  /* R/W */
-#define		AFC_CFG_BACK_DUR		(0x000000F0)  /* R/W */
-#define		AFC_CFG_FCMULT			(0x00000008)  /* R/W */
-#define		AFC_CFG_FCBRD			(0x00000004)  /* R/W */
-#define		AFC_CFG_FCADD			(0x00000002)  /* R/W */
-#define		AFC_CFG_FCANY			(0x00000001)  /* R/W */
-
-#define E2P_CMD			__REG(CONFIG_DRIVER_SMC911X_BASE + 0xB0)
-#define		E2P_CMD_EPC_BUSY		(0x80000000)
-							/* Self Clearing */
-#define		E2P_CMD_EPC_CMD			(0x70000000)  /* R/W */
-#define		E2P_CMD_EPC_CMD_READ		(0x00000000)  /* R/W */
-#define		E2P_CMD_EPC_CMD_EWDS		(0x10000000)  /* R/W */
-#define		E2P_CMD_EPC_CMD_EWEN		(0x20000000)  /* R/W */
-#define		E2P_CMD_EPC_CMD_WRITE		(0x30000000)  /* R/W */
-#define		E2P_CMD_EPC_CMD_WRAL		(0x40000000)  /* R/W */
-#define		E2P_CMD_EPC_CMD_ERASE		(0x50000000)  /* R/W */
-#define		E2P_CMD_EPC_CMD_ERAL		(0x60000000)  /* R/W */
-#define		E2P_CMD_EPC_CMD_RELOAD		(0x70000000)  /* R/W */
-#define		E2P_CMD_EPC_TIMEOUT		(0x00000200)  /* RO */
-#define		E2P_CMD_MAC_ADDR_LOADED		(0x00000100)  /* RO */
-#define		E2P_CMD_EPC_ADDR		(0x000000FF)  /* R/W */
-
-#define E2P_DATA		__REG(CONFIG_DRIVER_SMC911X_BASE + 0xB4)
-#define	E2P_DATA_EEPROM_DATA			(0x000000FF)  /* R/W */
-/* end of LAN register offsets and bit definitions */
-
-/* MAC Control and Status registers */
-#define MAC_CR			(0x01)  /* R/W */
-
-/* MAC_CR - MAC Control Register */
-#define MAC_CR_RXALL			(0x80000000)
-/* TODO: delete this bit? It is not described in the data sheet. */
-#define MAC_CR_HBDIS			(0x10000000)
-#define MAC_CR_RCVOWN			(0x00800000)
-#define MAC_CR_LOOPBK			(0x00200000)
-#define MAC_CR_FDPX			(0x00100000)
-#define MAC_CR_MCPAS			(0x00080000)
-#define MAC_CR_PRMS			(0x00040000)
-#define MAC_CR_INVFILT			(0x00020000)
-#define MAC_CR_PASSBAD			(0x00010000)
-#define MAC_CR_HFILT			(0x00008000)
-#define MAC_CR_HPFILT			(0x00002000)
-#define MAC_CR_LCOLL			(0x00001000)
-#define MAC_CR_BCAST			(0x00000800)
-#define MAC_CR_DISRTY			(0x00000400)
-#define MAC_CR_PADSTR			(0x00000100)
-#define MAC_CR_BOLMT_MASK		(0x000000C0)
-#define MAC_CR_DFCHK			(0x00000020)
-#define MAC_CR_TXEN			(0x00000008)
-#define MAC_CR_RXEN			(0x00000004)
-
-#define ADDRH			(0x02)	  /* R/W mask 0x0000FFFFUL */
-#define ADDRL			(0x03)	  /* R/W mask 0xFFFFFFFFUL */
-#define HASHH			(0x04)	  /* R/W */
-#define HASHL			(0x05)	  /* R/W */
-
-#define MII_ACC			(0x06)	  /* R/W */
-#define MII_ACC_PHY_ADDR		(0x0000F800)
-#define MII_ACC_MIIRINDA		(0x000007C0)
-#define MII_ACC_MII_WRITE		(0x00000002)
-#define MII_ACC_MII_BUSY		(0x00000001)
-
-#define MII_DATA		(0x07)	  /* R/W mask 0x0000FFFFUL */
-
-#define FLOW			(0x08)	  /* R/W */
-#define FLOW_FCPT			(0xFFFF0000)
-#define FLOW_FCPASS			(0x00000004)
-#define FLOW_FCEN			(0x00000002)
-#define FLOW_FCBSY			(0x00000001)
-
-#define VLAN1			(0x09)	  /* R/W mask 0x0000FFFFUL */
-#define VLAN1_VTI1			(0x0000ffff)
-
-#define VLAN2			(0x0A)	  /* R/W mask 0x0000FFFFUL */
-#define VLAN2_VTI2			(0x0000ffff)
-
-#define WUFF			(0x0B)	  /* WO */
-
-#define WUCSR			(0x0C)	  /* R/W */
-#define WUCSR_GUE			(0x00000200)
-#define WUCSR_WUFR			(0x00000040)
-#define WUCSR_MPR			(0x00000020)
-#define WUCSR_WAKE_EN			(0x00000004)
-#define WUCSR_MPEN			(0x00000002)
-
-/* Chip ID values */
-#define CHIP_9115	0x115
-#define CHIP_9116	0x116
-#define CHIP_9117	0x117
-#define CHIP_9118	0x118
-#define CHIP_9215	0x115a
-#define CHIP_9216	0x116a
-#define CHIP_9217	0x117a
-#define CHIP_9218	0x118a
-
-struct chip_id {
-	u16 id;
-	char *name;
-};
-
-static const struct chip_id chip_ids[] =  {
-	{ CHIP_9115, "LAN9115" },
-	{ CHIP_9116, "LAN9116" },
-	{ CHIP_9117, "LAN9117" },
-	{ CHIP_9118, "LAN9118" },
-	{ CHIP_9215, "LAN9215" },
-	{ CHIP_9216, "LAN9216" },
-	{ CHIP_9217, "LAN9217" },
-	{ CHIP_9218, "LAN9218" },
-	{ 0, NULL },
-};
-
-#define DRIVERNAME "smc911x"
-
-u32 smc911x_get_mac_csr(u8 reg)
-{
-	while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY);
-	MAC_CSR_CMD = MAC_CSR_CMD_CSR_BUSY | MAC_CSR_CMD_R_NOT_W | reg;
-	while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY);
-
-	return MAC_CSR_DATA;
-}
-
-void smc911x_set_mac_csr(u8 reg, u32 data)
-{
-	while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY);
-	MAC_CSR_DATA = data;
-	MAC_CSR_CMD = MAC_CSR_CMD_CSR_BUSY | reg;
-	while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY); }
-
-static int smx911x_handle_mac_address(bd_t *bd)
-{
-	unsigned long addrh, addrl;
-	unsigned char *m = bd->bi_enetaddr;
-
-	/* if the environment has a valid mac address then use it */
-	if ((m[0] | m[1] | m[2] | m[3] | m[4] | m[5])) {
-		addrl = m[0] | m[1] << 8 | m[2] << 16 | m[3] << 24;
-		addrh = m[4] | m[5] << 8;
-		smc911x_set_mac_csr(ADDRH, addrh);
-		smc911x_set_mac_csr(ADDRL, addrl);
-	} else {
-		/* if not, try to get one from the eeprom */
-		addrh = smc911x_get_mac_csr(ADDRH);
-		addrl = smc911x_get_mac_csr(ADDRL);
-
-		m[0] = (addrl) & 0xff;
-		m[1] = (addrl >>  8) & 0xff;
-		m[2] = (addrl >> 16) & 0xff;
-		m[3] = (addrl >> 24) & 0xff;
-		m[4] = (addrh) & 0xff;
-		m[5] = (addrh >>  8) & 0xff;
-
-		/* we get 0xff when there is no eeprom connected */
-		if ((m[0] & m[1] & m[2] & m[3] & m[4] & m[5]) == 0xff) {
-			printf(DRIVERNAME ": no valid mac address "
-				"in environment "
-				"and no eeprom found\n");
-			return -1;
-		}
-	}
-
-	printf(DRIVERNAME ": MAC %02x:%02x:%02x:%02x:%02x:%02x\n",
-		m[0], m[1], m[2], m[3], m[4], m[5]);
-
-	return 0;
-}
-
-static int smc911x_miiphy_read(u8 phy, u8 reg, u16 *val)
-{
-	while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY);
-
-	smc911x_set_mac_csr(MII_ACC, phy << 11 | reg << 6 | MII_ACC_MII_BUSY);
-
-	while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY);
-
-	*val = smc911x_get_mac_csr(MII_DATA);
-
-	return 0;
-}
-
-static int smc911x_miiphy_write(u8 phy, u8 reg, u16  val)
-{
-	while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY);
-
-	smc911x_set_mac_csr(MII_DATA, val);
-	smc911x_set_mac_csr(MII_ACC,
-		phy << 11 | reg << 6 | MII_ACC_MII_BUSY | MII_ACC_MII_WRITE);
-
-	while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY);
-	return 0;
-}
-
-static int smc911x_phy_reset(void)
-{
-	u32 reg;
-
-	reg = PMT_CTRL;
-	reg &= ~0xfffff030;
-	reg |= PMT_CTRL_PHY_RST;
-	PMT_CTRL = reg;
-
-	mdelay(100);
-
-	return 0;
-}
-
-static void smc911x_phy_configure(void)
-{
-	int timeout;
-	u16 status;
-
-	smc911x_phy_reset();
-
-	smc911x_miiphy_write(1, PHY_BMCR, PHY_BMCR_RESET);
-	mdelay(1);
-	smc911x_miiphy_write(1, PHY_ANAR, 0x01e1);
-	smc911x_miiphy_write(1, PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
-
-	timeout = 5000;
-	do {
-		mdelay(1);
-		if ((timeout--) == 0)
-			goto err_out;
-
-		if (smc911x_miiphy_read(1, PHY_BMSR, &status) != 0)
-			goto err_out;
-	} while (!(status & PHY_BMSR_LS));
-
-	printf(DRIVERNAME ": phy initialized\n");
-
-	return;
-
-err_out:
-	printf(DRIVERNAME ": autonegotiation timed out\n"); }
-
-static void smc911x_reset(void)
-{
-	int timeout;
-
-	/* Take out of PM setting first */
-	if (PMT_CTRL & PMT_CTRL_READY) {
-		/* Write to the bytetest will take out of powerdown */
-		BYTE_TEST = 0x0;
-
-		timeout = 10;
-
-		while (timeout-- && !(PMT_CTRL & PMT_CTRL_READY))
-			udelay(10);
-		if (!timeout) {
-			printf(DRIVERNAME
-				": timeout waiting for PM restore\n");
-			return;
-		}
-	}
-
-	/* Disable interrupts */
-	INT_EN = 0;
-
-	HW_CFG = HW_CFG_SRST;
-
-	timeout = 1000;
-	while (timeout-- && E2P_CMD & E2P_CMD_EPC_BUSY)
-		udelay(10);
-
-	if (!timeout) {
-		printf(DRIVERNAME ": reset timeout\n");
-		return;
-	}
-
-	/* Reset the FIFO level and flow control settings */
-	smc911x_set_mac_csr(FLOW, FLOW_FCPT | FLOW_FCEN);
-	AFC_CFG = 0x0050287F;
-
-	/* Set to LED outputs */
-	GPIO_CFG = 0x70070000;
-}
-
-static void smc911x_enable(void)
-{
-	/* Enable TX */
-	HW_CFG = 8 << 16 | HW_CFG_SF;
-
-	GPT_CFG = GPT_CFG_TIMER_EN | 10000;
-
-	TX_CFG = TX_CFG_TX_ON;
-
-	/* no padding to start of packets */
-	RX_CFG = 0;
-
-	smc911x_set_mac_csr(MAC_CR, MAC_CR_TXEN | MAC_CR_RXEN | MAC_CR_HBDIS);
-
-}
-
-int eth_init(bd_t *bd)
-{
-	unsigned long val, i;
-
-	printf(DRIVERNAME ": initializing\n");
-
-	val = BYTE_TEST;
-	if (val != 0x87654321) {
-		printf(DRIVERNAME ": Invalid chip endian 0x08%x\n", val);
-		goto err_out;
-	}
-
-	val = ID_REV >> 16;
-	for (i = 0; chip_ids[i].id != 0; i++) {
-		if (chip_ids[i].id == val)
-			break;
-	}
-	if (!chip_ids[i].id) {
-		printf(DRIVERNAME ": Unknown chip ID %04x\n", val);
-		goto err_out;
-	}
-
-	printf(DRIVERNAME ": detected %s controller\n", chip_ids[i].name);
-
-	smc911x_reset();
-
-	/* Configure the PHY, initialize the link state */
-	smc911x_phy_configure();
-
-	if (smx911x_handle_mac_address(bd))
-		goto err_out;
-
-	/* Turn on Tx + Rx */
-	smc911x_enable();
-
-	return 0;
-
-err_out:
-	return -1;
-}
-
-int eth_send(volatile void *packet, int length)
-{
-	u32 *data = (u32 *)packet;
-	u32 tmplen;
-	u32 status;
-
-	TX_DATA_FIFO = TX_CMD_A_INT_FIRST_SEG | TX_CMD_A_INT_LAST_SEG | length;
-	TX_DATA_FIFO = length;
-
-	tmplen = (length + 3) / 4;
-
-	while (tmplen--)
-		TX_DATA_FIFO = *data++;
-
-	/* wait for transmission */
-	while (!((TX_FIFO_INF & TX_FIFO_INF_TSUSED) >> 16));
-
-	/* get status. Ignore 'no carrier' error, it has no meaning for
-	 * full duplex operation
-	 */
-	status = TX_STATUS_FIFO & (TX_STS_LOC | TX_STS_LATE_COLL |
-		TX_STS_MANY_COLL | TX_STS_MANY_DEFER | TX_STS_UNDERRUN);
-
-	if (!status)
-		return 0;
-
-	printf(DRIVERNAME ": failed to send packet: %s%s%s%s%s\n",
-		status & TX_STS_LOC ? "TX_STS_LOC " : "",
-		status & TX_STS_LATE_COLL ? "TX_STS_LATE_COLL " : "",
-		status & TX_STS_MANY_COLL ? "TX_STS_MANY_COLL " : "",
-		status & TX_STS_MANY_DEFER ? "TX_STS_MANY_DEFER " : "",
-		status & TX_STS_UNDERRUN ? "TX_STS_UNDERRUN" : "");
-
-	return -1;
-}
-
-void eth_halt(void)
-{
-	smc911x_reset();
-}
-
-int eth_rx(void)
-{
-	u32 *data = (u32 *)NetRxPackets[0];
-	u32 pktlen, tmplen;
-	u32 status;
-
-	if ((RX_FIFO_INF & RX_FIFO_INF_RXSUSED) >> 16) {
-		status = RX_STATUS_FIFO;
-		pktlen = (status & RX_STS_PKT_LEN) >> 16;
-
-		RX_CFG = 0;
-
-		tmplen = (pktlen + 2 + 3) / 4;
-		while (tmplen--)
-			*data++ = RX_DATA_FIFO;
-
-		if (status & RX_STS_ES)
-			printf(DRIVERNAME
-				": dropped bad packet. Status: 0x%08x\n",
-				status);
-		else
-			NetReceive(NetRxPackets[0], pktlen);
-	}
-
-	return 0;
-}
-
-#endif				/* CONFIG_DRIVER_SMC911X */
diff --git a/include/asm-arm/arch-omap24xx/bits.h b/include/asm-arm/arch-arm1136/bits.h
index 8522335bf..8522335bf 100644
--- a/include/asm-arm/arch-omap24xx/bits.h
+++ b/include/asm-arm/arch-arm1136/bits.h
diff --git a/include/asm-arm/arch-omap24xx/clocks.h b/include/asm-arm/arch-arm1136/clocks.h
index 2a95af181..2a95af181 100644
--- a/include/asm-arm/arch-omap24xx/clocks.h
+++ b/include/asm-arm/arch-arm1136/clocks.h
diff --git a/include/asm-arm/arch-omap24xx/i2c.h b/include/asm-arm/arch-arm1136/i2c.h
index 7248950e5..7248950e5 100644
--- a/include/asm-arm/arch-omap24xx/i2c.h
+++ b/include/asm-arm/arch-arm1136/i2c.h
diff --git a/include/asm-arm/arch-omap24xx/mem.h b/include/asm-arm/arch-arm1136/mem.h
index c81f1c437..c81f1c437 100644
--- a/include/asm-arm/arch-omap24xx/mem.h
+++ b/include/asm-arm/arch-arm1136/mem.h
diff --git a/include/asm-arm/arch-omap24xx/mux.h b/include/asm-arm/arch-arm1136/mux.h
index 4fdb9c635..4fdb9c635 100644
--- a/include/asm-arm/arch-omap24xx/mux.h
+++ b/include/asm-arm/arch-arm1136/mux.h
diff --git a/include/asm-arm/arch-omap24xx/omap2420.h b/include/asm-arm/arch-arm1136/omap2420.h
index 0c11beccf..0c11beccf 100644
--- a/include/asm-arm/arch-omap24xx/omap2420.h
+++ b/include/asm-arm/arch-arm1136/omap2420.h
diff --git a/include/asm-arm/arch-omap24xx/sizes.h b/include/asm-arm/arch-arm1136/sizes.h
index aaba18f15..aaba18f15 100644
--- a/include/asm-arm/arch-omap24xx/sizes.h
+++ b/include/asm-arm/arch-arm1136/sizes.h
diff --git a/include/asm-arm/arch-omap24xx/sys_info.h b/include/asm-arm/arch-arm1136/sys_info.h
index 53c231a5e..53c231a5e 100644
--- a/include/asm-arm/arch-omap24xx/sys_info.h
+++ b/include/asm-arm/arch-arm1136/sys_info.h
diff --git a/include/asm-arm/arch-omap24xx/sys_proto.h b/include/asm-arm/arch-arm1136/sys_proto.h
index 9d8e5b262..9d8e5b262 100644
--- a/include/asm-arm/arch-omap24xx/sys_proto.h
+++ b/include/asm-arm/arch-arm1136/sys_proto.h
diff --git a/include/asm-arm/arch-davinci/hardware.h b/include/asm-arm/arch-davinci/hardware.h
index 2b3eb90c3..ebcdcfea1 100644
--- a/include/asm-arm/arch-davinci/hardware.h
+++ b/include/asm-arm/arch-davinci/hardware.h
@@ -150,8 +150,6 @@ typedef volatile unsigned int *	dv_reg_p;
 
 #define VDD3P3V_PWDN			(0x01c40048)
 #define UART0_PWREMU_MGMT		(0x01c20030)
-#define UART1_PWREMU_MGMT		(0x01c20430)
-#define UART2_PWREMU_MGMT		(0x01c20830)
 
 #define PSC_SILVER_BULLET		(0x01c41a20)
 
diff --git a/include/asm-arm/arch-mx31/mx31-regs.h b/include/asm-arm/arch-mx31/mx31-regs.h
deleted file mode 100644
index 2f0d80902..000000000
--- a/include/asm-arm/arch-mx31/mx31-regs.h
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- *
- * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_MX31_REGS_H
-#define __ASM_ARCH_MX31_REGS_H
-
-#define __REG(x)     (*((volatile u32 *)(x)))
-#define __REG16(x)   (*((volatile u16 *)(x)))
-#define __REG8(x)    (*((volatile u8 *)(x)))
-
-#define CCM_BASE	0x53f80000
-#define CCM_CCMR	(CCM_BASE + 0x00)
-#define CCM_PDR0	(CCM_BASE + 0x04)
-#define CCM_PDR1	(CCM_BASE + 0x08)
-#define CCM_RCSR	(CCM_BASE + 0x0c)
-#define CCM_MPCTL	(CCM_BASE + 0x10)
-#define CCM_UPCTL	(CCM_BASE + 0x10)
-#define CCM_SPCTL	(CCM_BASE + 0x18)
-#define CCM_COSR	(CCM_BASE + 0x1C)
-
-#define CCMR_MDS	(1 << 7)
-#define CCMR_SBYCS	(1 << 4)
-#define CCMR_MPE	(1 << 3)
-#define CCMR_PRCS_MASK	(3 << 1)
-#define CCMR_FPM	(1 << 1)
-#define CCMR_CKIH	(2 << 1)
-
-#define PDR0_CSI_PODF(x)	(((x) & 0x1ff) << 23)
-#define PDR0_PER_PODF(x)	(((x) & 0x1f) << 16)
-#define PDR0_HSP_PODF(x)	(((x) & 0x7) << 11)
-#define PDR0_NFC_PODF(x)	(((x) & 0x7) << 8)
-#define PDR0_IPG_PODF(x)	(((x) & 0x3) << 6)
-#define PDR0_MAX_PODF(x)	(((x) & 0x7) << 3)
-#define PDR0_MCU_PODF(x)	((x) & 0x7)
-
-#define PLL_PD(x)		(((x) & 0xf) << 26)
-#define PLL_MFD(x)		(((x) & 0x3ff) << 16)
-#define PLL_MFI(x)		(((x) & 0xf) << 10)
-#define PLL_MFN(x)		(((x) & 0x3ff) << 0)
-
-#define WEIM_BASE	0xb8002000
-#define CSCR_U(x)	(WEIM_BASE + (x) * 0x10)
-#define CSCR_L(x)	(WEIM_BASE + 4 + (x) * 0x10)
-#define CSCR_A(x)	(WEIM_BASE + 8 + (x) * 0x10)
-
-#define IOMUXC_BASE	0x43FAC000
-#define IOMUXC_GPR	(IOMUXC_BASE + 0x8)
-#define IOMUXC_SW_MUX_CTL(x)	(IOMUXC_BASE + 0xc + (x) * 4)
-#define IOMUXC_SW_PAD_CTL(x)	(IOMUXC_BASE + 0x154 + (x) * 4)
-
-#define IPU_BASE		0x53fc0000
-#define IPU_CONF		IPU_BASE
-
-#define IPU_CONF_PXL_ENDIAN	(1<<8)
-#define IPU_CONF_DU_EN		(1<<7)
-#define IPU_CONF_DI_EN		(1<<6)
-#define IPU_CONF_ADC_EN		(1<<5)
-#define IPU_CONF_SDC_EN		(1<<4)
-#define IPU_CONF_PF_EN		(1<<3)
-#define IPU_CONF_ROT_EN		(1<<2)
-#define IPU_CONF_IC_EN		(1<<1)
-#define IPU_CONF_SCI_EN		(1<<0)
-
-#define WDOG_BASE		0x53FDC000
-
-/*
- * Signal Multiplexing (IOMUX)
- */
-
-/* bits in the SW_MUX_CTL registers */
-#define MUX_CTL_OUT_GPIO_DR	(0 << 4)
-#define MUX_CTL_OUT_FUNC	(1 << 4)
-#define MUX_CTL_OUT_ALT1	(2 << 4)
-#define MUX_CTL_OUT_ALT2	(3 << 4)
-#define MUX_CTL_OUT_ALT3	(4 << 4)
-#define MUX_CTL_OUT_ALT4	(5 << 4)
-#define MUX_CTL_OUT_ALT5	(6 << 4)
-#define MUX_CTL_OUT_ALT6	(7 << 4)
-#define MUX_CTL_IN_NONE		(0 << 0)
-#define MUX_CTL_IN_GPIO		(1 << 0)
-#define MUX_CTL_IN_FUNC		(2 << 0)
-#define MUX_CTL_IN_ALT1		(4 << 0)
-#define MUX_CTL_IN_ALT2		(8 << 0)
-
-#define MUX_CTL_FUNC		(MUX_CTL_OUT_FUNC | MUX_CTL_IN_FUNC)
-#define MUX_CTL_ALT1		(MUX_CTL_OUT_ALT1 | MUX_CTL_IN_ALT1)
-#define MUX_CTL_ALT2		(MUX_CTL_OUT_ALT2 | MUX_CTL_IN_ALT2)
-#define MUX_CTL_GPIO		(MUX_CTL_OUT_GPIO_DR | MUX_CTL_IN_GPIO)
-
-/* Register offsets based on IOMUXC_BASE */
-/* 0x00 .. 0x7b */
-#define MUX_CTL_RTS1		0x7c
-#define MUX_CTL_CTS1		0x7d
-#define MUX_CTL_DTR_DCE1	0x7e
-#define MUX_CTL_DSR_DCE1	0x7f
-#define MUX_CTL_CSPI2_SCLK	0x80
-#define MUX_CTL_CSPI2_SPI_RDY	0x81
-#define MUX_CTL_RXD1		0x82
-#define MUX_CTL_TXD1		0x83
-#define MUX_CTL_CSPI2_MISO	0x84
-/* 0x85 .. 0x8a */
-#define MUX_CTL_CSPI2_MOSI	0x8b
-
-/* The modes a specific pin can be in
- * these macros can be used in mx31_gpio_mux() and have the form
- * MUX_[contact name]__[pin function]
- */
-#define MUX_RXD1__UART1_RXD_MUX	((MUX_CTL_FUNC << 8) | MUX_CTL_RXD1)
-#define MUX_TXD1__UART1_TXD_MUX	((MUX_CTL_FUNC << 8) | MUX_CTL_TXD1)
-#define MUX_RTS1__UART1_RTS_B	((MUX_CTL_FUNC << 8) | MUX_CTL_RTS1)
-#define MUX_RTS1__UART1_CTS_B	((MUX_CTL_FUNC << 8) | MUX_CTL_CTS1)
-
-#define MUX_CSPI2_MOSI__I2C2_SCL ((MUX_CTL_ALT1 << 8) | MUX_CTL_CSPI2_MOSI)
-#define MUX_CSPI2_MISO__I2C2_SCL ((MUX_CTL_ALT1 << 8) | MUX_CTL_CSPI2_MISO)
-
-/*
- * Memory regions and CS
- */
-#define IPU_MEM_BASE	0x70000000
-#define CSD0_BASE	0x80000000
-#define CSD1_BASE	0x90000000
-#define CS0_BASE	0xA0000000
-#define CS1_BASE	0xA8000000
-#define CS2_BASE	0xB0000000
-#define CS3_BASE	0xB2000000
-#define CS4_BASE	0xB4000000
-#define CS4_PSRAM_BASE	0xB5000000
-#define CS5_BASE	0xB6000000
-#define PCMCIA_MEM_BASE	0xC0000000
-
-#endif /* __ASM_ARCH_MX31_REGS_H */
diff --git a/include/asm-arm/arch-mx31/mx31.h b/include/asm-arm/arch-mx31/mx31.h
deleted file mode 100644
index f89a401bb..000000000
--- a/include/asm-arm/arch-mx31/mx31.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- *
- * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_MX31_H
-#define __ASM_ARCH_MX31_H
-
-u32 mx31_get_mpl_dpdgck_clk(void);
-u32 mx31_get_mcu_main_clk(void);
-u32 mx31_get_ipg_clk(void);
-void mx31_gpio_mux(unsigned long mode);
-
-#endif /* __ASM_ARCH_MX31_H */
diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h
index 17d3b03dd..8ecd0595a 100644
--- a/include/configs/davinci_dvevm.h
+++ b/include/configs/davinci_dvevm.h
@@ -52,9 +52,6 @@
 #define DV_EVM
 #define CFG_NAND_SMALLPAGE
 #define CFG_USE_NOR
-#define CFG_USE_INTEL_NOR	/* Define this when your DVEVM has Intel
-				 * flash instead of AMD flash
-				 */
 /*===================*/
 /* SoC Configuration */
 /*===================*/
@@ -63,24 +60,6 @@
 #define CFG_TIMERBASE		0x01c21400	/* use timer 0 */
 #define CFG_HZ_CLOCK		27000000	/* Timer Input clock freq */
 #define CFG_HZ			1000
-#define CFG_DAVINCI_PINMUX_0	0x00000c1f
-#define CFG_DAVINCI_WAITCFG	0x00000000
-#define CFG_DAVINCI_ACFG2	0x3ffffffd	/* CE configs */
-#define CFG_DAVINCI_ACFG3	0x3ffffffd
-#define CFG_DAVINCI_ACFG4	0x3ffffffd
-#define CFG_DAVINCI_ACFG5	0x3ffffffd
-#undef	CFG_DAVINCI_NANDCE		/* When using NAND, define 2,3 or 4 */
-#define CFG_DAVINCI_DDRCTL	0x50006405	/* DDR timing config */
-#define CFG_DAVINCI_SDREF	0x000005c3
-#define CFG_DAVINCI_SDCFG	0x00178632	/* 8 banks */
-#define CFG_DAVINCI_SDTIM0	0x28923211
-#define CFG_DAVINCI_SDTIM1	0x0016c722
-#define CFG_DAVINCI_MMARG_BRF0	0x00444400
-/* DM6446 = 0x15, DM6441 = 0x12, DM6441_LV = 0x0e */
-#define CFG_DAVINCI_PLL1_PLLM	0x15
-#define CFG_DAVINCI_PLL2_PLLM	0x17		/* 162 MHz */
-#define CFG_DAVINCI_PLL2_DIV1	0x0b		/* 54 MHz */
-#define CFG_DAVINCI_PLL2_DIV2	0x01
 /*====================================================*/
 /* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
 /* on Sonata/DV_EVM board. No EEPROM on schmoogie.    */
@@ -135,7 +114,7 @@
 #ifdef CFG_USE_NAND
 #undef CFG_ENV_IS_IN_FLASH
 #define CFG_NO_FLASH
-#define CFG_ENV_IS_IN_NAND		/* U-Boot env in NAND Flash */
+#define CFG_ENV_IS_IN_NAND		/* U-Boot env in NAND Flash  */
 #ifdef CFG_NAND_SMALLPAGE
 #define CFG_ENV_SECT_SIZE	512	/* Env sector Size */
 #define CFG_ENV_SIZE		SZ_16K
@@ -160,31 +139,24 @@
 #undef CONFIG_SKIP_RELOCATE_UBOOT
 #endif
 #define CFG_ENV_IS_IN_FLASH
-#undef	CFG_NO_FLASH
+#undef CFG_NO_FLASH
 #define CFG_FLASH_CFI_DRIVER
 #define CFG_FLASH_CFI
 #define CFG_MAX_FLASH_BANKS	1		/* max number of flash banks */
-#define CFG_ENV_ADDR		(PHYS_FLASH_1 + 0x40000)
-#define CFG_ENV_OFFSET		(CFG_ENV_ADDR)
-#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
-#define PHYS_FLASH_1		0x02000000	/* CS2 Base address */
+#define CFG_FLASH_SECT_SZ	0x10000		/* 64KB sect size AMD Flash */
+#define CFG_ENV_OFFSET		(CFG_FLASH_SECT_SZ*3)
+#define PHYS_FLASH_1		0x02000000	/* CS2 Base address 	 */
 #define CFG_FLASH_BASE		PHYS_FLASH_1	/* Flash Base for U-Boot */
-#define PHYS_FLASH_SIZE		0x2000000	/* Flash size 32MB */
+#define PHYS_FLASH_SIZE		0x2000000	/* Flash size 32MB 	 */
 #define CFG_MAX_FLASH_SECT	(PHYS_FLASH_SIZE/CFG_FLASH_SECT_SZ)
 #define CFG_ENV_SECT_SIZE	CFG_FLASH_SECT_SZ	/* Env sector Size */
-#ifdef CFG_USE_INTEL_NOR
-#define CFG_FLASH_SECT_SZ	0x20000	/* 128KB sect size INTEL Flash */
-#define CFG_FLASH_PROTECTION	1
-#else
-#define CFG_FLASH_SECT_SZ	0x10000	/* 64KB sect size AMD Flash */
-#endif
 #endif
 /*==============================*/
 /* U-Boot general configuration */
 /*==============================*/
-#undef	CONFIG_USE_IRQ				/* No IRQ/FIQ in U-Boot */
+#undef 	CONFIG_USE_IRQ			/* No IRQ/FIQ in U-Boot */
 #define CONFIG_MISC_INIT_R
-#undef	CONFIG_BOOTDELAY
+#undef CONFIG_BOOTDELAY
 #define CONFIG_BOOTFILE		"uImage"	/* Boot file name */
 #define CFG_PROMPT		"U-Boot > "	/* Monitor Command Prompt */
 #define CFG_CBSIZE		1024		/* Console I/O Buffer Size  */
diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h
index cb69535e1..96c9a3014 100644
--- a/include/configs/davinci_schmoogie.h
+++ b/include/configs/davinci_schmoogie.h
@@ -35,24 +35,6 @@
 #define CFG_TIMERBASE		0x01c21400	/* use timer 0 */
 #define CFG_HZ_CLOCK		27000000	/* Timer Input clock freq */
 #define CFG_HZ			1000
-#define CFG_DAVINCI_PINMUX_0	0x00000c1f
-#define CFG_DAVINCI_WAITCFG	0x00000000
-#define CFG_DAVINCI_ACFG2	0x0432229c	/* CE configs */
-#define CFG_DAVINCI_ACFG3	0x3ffffffd
-#define CFG_DAVINCI_ACFG4	0x3ffffffd
-#define CFG_DAVINCI_ACFG5	0x3ffffffd
-#define CFG_DAVINCI_NANDCE	2 	/* When using NAND, define 2,3 or 4 */
-#define CFG_DAVINCI_DDRCTL	0x50006405	/* DDR timing config */
-#define CFG_DAVINCI_SDREF	0x000005c3
-#define CFG_DAVINCI_SDCFG	0x00178622	/* 4 banks */
-#define CFG_DAVINCI_SDTIM0	0x28923211
-#define CFG_DAVINCI_SDTIM1	0x0016c722
-#define CFG_DAVINCI_MMARG_BRF0	0x00444400
-/* DM6446 = 0x15, DM6441 = 0x12, DM6441_LV = 0x0e */
-#define CFG_DAVINCI_PLL1_PLLM	0x15
-#define CFG_DAVINCI_PLL2_PLLM	0x17		/* 162 MHz */
-#define CFG_DAVINCI_PLL2_DIV1	0x0b		/* 54 MHz */
-#define CFG_DAVINCI_PLL2_DIV2	0x01
 /*=============*/
 /* Memory Info */
 /*=============*/
@@ -64,6 +46,7 @@
 #define CONFIG_STACKSIZE	(256*1024)	/* regular stack */
 #define PHYS_SDRAM_1		0x80000000	/* DDR Start */
 #define PHYS_SDRAM_1_SIZE	0x08000000	/* DDR size 128MB */
+#define DDR_4BANKS				/* 4-bank DDR2 (128MB) */
 /*====================*/
 /* Serial Driver info */
 /*====================*/
diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h
index b2c0d7d17..de8c4fac2 100644
--- a/include/configs/davinci_sonata.h
+++ b/include/configs/davinci_sonata.h
@@ -60,24 +60,6 @@
 #define CFG_TIMERBASE		0x01c21400	/* use timer 0 */
 #define CFG_HZ_CLOCK		27000000	/* Timer Input clock freq */
 #define CFG_HZ			1000
-#define CFG_DAVINCI_PINMUX_0	0x00000c1f
-#define CFG_DAVINCI_WAITCFG	0x00000000
-#define CFG_DAVINCI_ACFG2	0x3ffffffd	/* CE configs */
-#define CFG_DAVINCI_ACFG3	0x3ffffffd
-#define CFG_DAVINCI_ACFG4	0x3ffffffd
-#define CFG_DAVINCI_ACFG5	0x3ffffffd
-#undef  CFG_DAVINCI_NANDCE    		/* When using NAND, define 2,3 or 4 */
-#define CFG_DAVINCI_DDRCTL	0x50006405	/* DDR timing config */
-#define CFG_DAVINCI_SDREF	0x000005c3
-#define CFG_DAVINCI_SDCFG	0x00178632	/* 8 banks */
-#define CFG_DAVINCI_SDTIM0	0x28923211
-#define CFG_DAVINCI_SDTIM1	0x0016c722
-#define CFG_DAVINCI_MMARG_BRF0	0x00444400
-/* DM6446 = 0x15, DM6441 = 0x12, DM6441_LV = 0x0e */
-#define CFG_DAVINCI_PLL1_PLLM	0x15
-#define CFG_DAVINCI_PLL2_PLLM	0x17		/* 162 MHz */
-#define CFG_DAVINCI_PLL2_DIV1	0x0b		/* 54 MHz */
-#define CFG_DAVINCI_PLL2_DIV2	0x01
 /*====================================================*/
 /* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
 /* on Sonata/DV_EVM board. No EEPROM on schmoogie.    */
diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h
deleted file mode 100644
index a6ed77a98..000000000
--- a/include/configs/imx31_litekit.h
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments.
- * Richard Woodruff <r-woodruff2@ti.com>
- * Kshitij Gupta <kshitij@ti.com>
- *
- * Configuration settings for the 242x TI H4 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
- /* High Level Configuration Options */
-#define CONFIG_ARM1136		1    /* This is an arm1136 CPU core */
-#define CONFIG_MX31		1    /* in a mx31 */
-#define CONFIG_MX31_HCLK_FREQ	26000000
-#define CONFIG_MX31_CLK32	32000
-
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
-/* Temporarily disabled */
-#if 0
-#define CONFIG_OF_LIBFDT		1
-#define CONFIG_FIT			1
-#define CONFIG_FIT_VERBOSE		1
-#endif
-
-#define CONFIG_CMDLINE_TAG		1    /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_INITRD_TAG		1
-
-/*
- * Size of malloc() pool
- */
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128 * 1024)
-#define CFG_GBL_DATA_SIZE	128  /* num bytes reserved for initial data */
-
-/*
- * Hardware drivers
- */
-
-#define CONFIG_MX31_UART	1
-#define CFG_MX31_UART1		1
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX	1
-#define CONFIG_BAUDRATE		115200
-#define CFG_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
-
-/***********************************************************
- * Command definition
- ***********************************************************/
-
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-
-#define CONFIG_BOOTDELAY	3
-
-#define CONFIG_NETMASK		255.255.255.0
-#define CONFIG_IPADDR		192.168.23.168
-#define CONFIG_SERVERIP		192.168.23.2
-
-#define	CONFIG_EXTRA_ENV_SETTINGS				\
-	"bootargs_base=setenv bootargs console=ttySMX0,115200\0"	\
-	"bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs "	\
-		"ip=dhcp nfsroot=$(serverip):$(nfsrootfs), v3, tcp\0"	\
-	"bootcmd=run bootcmd_net\0"					\
-	"bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; "	\
-		"tftpboot 0x80000000 uImage-mx31; bootm\0"		\
-	"prg_uboot=tftpboot 0x80000000 u-boot-imx31_litekit.bin; "	\
-		"protect off all; erase 0xa00d0000 0xa01effff; "	\
-		"cp.b 0x80000000 0xa00d0000 $(filesize)\0"
-
-#define CONFIG_DRIVER_SMC911X		1
-#define CONFIG_DRIVER_SMC911X_BASE	0xb4020000
-
-/*
- * Miscellaneous configurable options
- */
-#define CFG_LONGHELP		/* undef to save memory */
-#define CFG_PROMPT		"uboot> "
-#define CFG_CBSIZE		256  /* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
-#define CFG_MAXARGS		16          /* max number of command args */
-#define CFG_BARGSIZE		CFG_CBSIZE  /* Boot Argument Buffer Size */
-
-#define CFG_MEMTEST_START	0  /* memtest works on */
-#define CFG_MEMTEST_END		0x10000
-
-#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
-
-#define CFG_LOAD_ADDR		0 /* default load address */
-
-#define CFG_HZ			32000
-
-#define CONFIG_CMDLINE_EDITING	1
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE	(128 * 1024) /* regular stack */
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS	1
-#define PHYS_SDRAM_1		0x80000000
-#define PHYS_SDRAM_1_SIZE	(128 * 1024 * 1024)
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CFG_FLASH_BASE		0xa0000000
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	128	/* max number of sectors on one chip */
-/* Monitor at beginning of flash */
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-
-#define CFG_ENV_ADDR		0xa01f0000
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SECT_SIZE	(64 * 1024)
-#define CFG_ENV_SIZE		(64 * 1024)
-
-/*-----------------------------------------------------------------------
- * CFI FLASH driver setup
- */
-#define CFG_FLASH_CFI		1	/* Flash memory is CFI compliant */
-#define CFG_FLASH_CFI_DRIVER	1	/* Use drivers/cfi_flash.c */
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* Use buffered writes (~10x faster) */
-#define CFG_FLASH_PROTECTION	1	/* Use hardware sector protection */
-
-/* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(100*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(100*CFG_HZ) /* Timeout for Flash Write */
-
-/*
- * JFFS2 partitions
- */
-#undef CONFIG_JFFS2_CMDLINE
-#define CONFIG_JFFS2_DEV	"nor0"
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h
deleted file mode 100644
index 647b05b32..000000000
--- a/include/configs/imx31_phycore.h
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments.
- * Richard Woodruff <r-woodruff2@ti.com>
- * Kshitij Gupta <kshitij@ti.com>
- *
- * Configuration settings for the 242x TI H4 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
- /* High Level Configuration Options */
-#define CONFIG_ARM1136		1    /* This is an arm1136 CPU core */
-#define CONFIG_MX31		1    /* in a mx31 */
-#define CONFIG_MX31_HCLK_FREQ	26000000
-#define CONFIG_MX31_CLK32	32000
-
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
-/* Temporarily disabled */
-#if 0
-#define CONFIG_OF_LIBFDT		1
-#define CONFIG_FIT			1
-#define CONFIG_FIT_VERBOSE		1
-#endif
-
-#define CONFIG_CMDLINE_TAG		1    /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_INITRD_TAG		1
-
-/*
- * Size of malloc() pool
- */
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128 * 1024)
-#define CFG_GBL_DATA_SIZE	128  /* num bytes reserved for initial data */
-
-/*
- * Hardware drivers
- */
-
-#define CONFIG_HARD_I2C		1
-#define CONFIG_I2C_MXC		1
-#define CFG_I2C_MX31_PORT2	1
-#define CFG_I2C_SPEED		100000
-#define CFG_I2C_SLAVE		0xfe
-
-#define CONFIG_MX31_UART	1
-#define CFG_MX31_UART1		1
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX	1
-#define CONFIG_BAUDRATE		115200
-#define CFG_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
-
-/***********************************************************
- * Command definition
- ***********************************************************/
-
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_I2C
-
-#define CONFIG_BOOTDELAY	3
-
-#define MTDPARTS_DEFAULT	\
-	"mtdparts=physmap-flash.0:128k(uboot)ro,1536k(kernel),-(root)"
-
-#define CONFIG_NETMASK		255.255.255.0
-#define CONFIG_IPADDR		192.168.23.168
-#define CONFIG_SERVERIP		192.168.23.2
-
-#define	CONFIG_EXTRA_ENV_SETTINGS				\
-	"bootargs_base=setenv bootargs console=ttySMX0,115200\0"	\
-	"bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs "	\
-		"ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0"	\
-	"bootargs_flash=setenv bootargs $(bootargs) "			\
-		"root=/dev/mtdblock2 rootfstype=jffs2\0"		\
-	"bootargs_mtd=setenv bootargs $(bootargs) $(mtdparts)\0"	\
-	"bootcmd=run bootcmd_net\0"			       		\
-	"bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; " 	\
-		"tftpboot 0x80000000 $(uimage); bootm\0"		\
-	"bootcmd_flash=run bootargs_base bootargs_mtd bootargs_flash; "	\
-		"bootm 0x80000000\0"					\
-	"unlock=yes\0"							\
-	"mtdparts=" MTDPARTS_DEFAULT "\0"				\
-	"prg_uboot=tftpboot 0x80000000 $(uboot); " 			\
-		"protect off 0xa0000000 +0x20000; "			\
-		"erase 0xa0000000 +0x20000; "				\
-		"cp.b 0x80000000 0xa0000000 $(filesize)\0" 		\
-	"prg_kernel=tftpboot 0x80000000 $(uimage); "			\
-		"erase 0xa0040000 +0x180000; "				\
-		"cp.b 0x80000000 0xa0040000 $(filesize)\0"		\
-	"prg_jffs2=tftpboot 0x80000000 $(jffs2); " 			\
-		"erase 0xa01c0000 0xa1ffffff; "				\
-		"cp.b 0x80000000 0xa01c0000 $(filesize)\0"
-
-#define CONFIG_DRIVER_SMC911X		1
-#define CONFIG_DRIVER_SMC911X_BASE	0xa8000000
-
-/*
- * Miscellaneous configurable options
- */
-#define CFG_LONGHELP		/* undef to save memory */
-#define CFG_PROMPT		"uboot> "
-#define CFG_CBSIZE		256  /* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
-#define CFG_MAXARGS		16          /* max number of command args */
-#define CFG_BARGSIZE		CFG_CBSIZE  /* Boot Argument Buffer Size */
-
-#define CFG_MEMTEST_START	0  /* memtest works on */
-#define CFG_MEMTEST_END		0x10000
-
-#define CFG_LOAD_ADDR		0 /* default load address */
-
-#define CFG_HZ			32000
-
-#define CONFIG_CMDLINE_EDITING	1
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below  */
-#define CONFIG_STACKSIZE	(128 * 1024) /* regular stack */
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS	1
-#define PHYS_SDRAM_1		0x80000000
-#define PHYS_SDRAM_1_SIZE	(128 * 1024 * 1024)
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CFG_FLASH_BASE		0xa0000000
-#define CFG_MAX_FLASH_BANKS	1 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	259 /* max number of sectors on one chip */
-#define CFG_MONITOR_BASE CFG_FLASH_BASE /* Monitor at beginning of flash */
-
-#define	CFG_ENV_IS_IN_EEPROM		1
-#define CFG_ENV_OFFSET			0x00	/* environment starts here */
-#define CFG_ENV_SIZE			4096
-#define CFG_I2C_EEPROM_ADDR		0x52
-#define CFG_EEPROM_PAGE_WRITE_BITS	5	/* 5 bits = 32 octets */
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* between stop and start */
-#define CFG_I2C_EEPROM_ADDR_LEN		2 /* length of byte address */
-
-/*-----------------------------------------------------------------------
- * CFI FLASH driver setup
- */
-#define CFG_FLASH_CFI		1	/* Flash memory is CFI compliant */
-#define CFG_FLASH_CFI_DRIVER	1	/* Use drivers/cfi_flash.c */
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* Use buffered writes (~10x faster) */
-#define CFG_FLASH_PROTECTION	1	/* Use hardware sector protection */
-
-/* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(100*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(100*CFG_HZ) /* Timeout for Flash Write */
-
-/*
- * JFFS2 partitions
- */
-#undef CONFIG_JFFS2_CMDLINE
-#define CONFIG_JFFS2_DEV	"nor0"
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h
deleted file mode 100644
index be7f3c6c0..000000000
--- a/include/configs/mx31ads.h
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * Copyright (C) 2008, Guennadi Liakhovetski <lg@denx.de>
- *
- * Configuration settings for the MX31ADS Freescale board.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <asm/arch/mx31-regs.h>
-
- /* High Level Configuration Options */
-#define CONFIG_ARM1136		1	/* This is an arm1136 CPU core */
-#define CONFIG_MX31		1	/* in a mx31 */
-#define CONFIG_MX31_HCLK_FREQ	26000000	/* RedBoot says 26MHz */
-#define CONFIG_MX31_CLK32	32000
-
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
-/*
- * Disabled for now due to build problems under Debian and
- * a significant increase in the final file size: 144260 vs. 109536 Bytes
- */
-#if 0
-#define CONFIG_OF_LIBFDT		1
-#define CONFIG_FIT			1
-#define CONFIG_FIT_VERBOSE		1
-#endif
-
-#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_INITRD_TAG		1
-
-/*
- * Size of malloc() pool
- */
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128 * 1024)
-#define CFG_GBL_DATA_SIZE	128  /* num bytes reserved for initial data */
-
-/*
- * Hardware drivers
- */
-
-#define CONFIG_MX31_UART	1
-#define CFG_MX31_UART1		1
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX	1
-#define CONFIG_BAUDRATE		115200
-#define CFG_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
-
-/***********************************************************
- * Command definition
- ***********************************************************/
-
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-
-#define CONFIG_BOOTDELAY	3
-
-#define CONFIG_NETMASK		255.255.255.0
-#define CONFIG_IPADDR		192.168.23.168
-#define CONFIG_SERVERIP		192.168.23.2
-
-#define	CONFIG_EXTRA_ENV_SETTINGS				\
-	"bootargs_base=setenv bootargs console=ttymxc0,115200\0"	\
-	"bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs "	\
-		"ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0"	\
-	"bootcmd=run bootcmd_net\0"  					\
-	"bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; " 	\
-		"tftpboot 0x80000000 uImage-mx31; bootm\0"		\
-	"prg_uboot=tftpboot 0x80000000 u-boot-mx31ads.bin; " 		\
-		"protect off 0xa0000000 0xa001ffff; "			\
-		"erase 0xa0000000 0xa001ffff; "				\
-		"cp.b 0x80000000 0xa0000000 $(filesize)\0"
-
-#define CONFIG_DRIVER_CS8900	1
-#define CS8900_BASE		0xb4020300
-#define CS8900_BUS16		1 /* the Linux driver does accesses as shorts */
-
-/*
- * Miscellaneous configurable options
- */
-#define CFG_LONGHELP		/* undef to save memory */
-#define CFG_PROMPT		"=> "
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
-#define CFG_MAXARGS		16		/* max number of command args */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
-
-#define CFG_MEMTEST_START	0		/* memtest works on */
-#define CFG_MEMTEST_END		0x10000
-
-#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
-
-#define CFG_LOAD_ADDR		CSD0_BASE	/* default load address */
-
-#define CFG_HZ			32000
-
-#define CONFIG_CMDLINE_EDITING	1
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below  */
-#define CONFIG_STACKSIZE	(128 * 1024)	/* regular stack */
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS	1
-#define PHYS_SDRAM_1		CSD0_BASE
-#define PHYS_SDRAM_1_SIZE	(128 * 1024 * 1024)
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CFG_FLASH_BASE		CS0_BASE
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	262	/* max number of sectors on one chip */
-#define CFG_MONITOR_BASE CFG_FLASH_BASE /* Monitor at beginning of flash */
-#define CFG_MONITOR_LEN		(128 * 1024)	/* Reserve 128KiB */
-
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SECT_SIZE	(32 * 1024)
-#define CFG_ENV_SIZE		CFG_ENV_SECT_SIZE
-/* S29WS256N NOR flash has 4 32KiB small sectors at beginning and end.
- * The rest of 32MiB is in 128KiB big sectors.
- * U-Boot occupies the low 4 sectors,
- * if we put environment next to it, we will have to occupy 128KiB for it.
- * Putting it at the top of flash we use only 32KiB. */
-#define CFG_ENV_ADDR	(CFG_MONITOR_BASE + 32 * 1024 * 1024 - CFG_ENV_SIZE)
-
-/*-----------------------------------------------------------------------
- * CFI FLASH driver setup
- */
-#define CFG_FLASH_CFI			1 /* Flash memory is CFI compliant */
-#define CFG_FLASH_CFI_DRIVER		1 /* Use drivers/cfi_flash.c */
-#if 0 /* Doesn't work yet, work in progress */
-#define CFG_FLASH_USE_BUFFER_WRITE	1 /* Use buffered writes(~10x faster)*/
-#endif
-#define CFG_FLASH_PROTECTION		1 /* Use hardware sector protection */
-
-/*
- * JFFS2 partitions
- */
-#undef CONFIG_JFFS2_CMDLINE
-#define CONFIG_JFFS2_DEV	"nor0"
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/pmdra.h b/include/configs/pmdra.h
deleted file mode 100644
index e170ee9cc..000000000
--- a/include/configs/pmdra.h
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- * Copyright (C) 2008 Prodrive BV <pieter.voorthijsen@prodrive.nl>
- *
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-#include <asm/sizes.h>
-
-/*=======*/
-/* Board */
-/*=======*/
-#define CFG_PMDRA
-#define CFG_NAND_LARGEPAGE
-/*===================*/
-/* SoC Configuration */
-/*===================*/
-#define CONFIG_ARM926EJS			/* arm926ejs CPU core */
-#define CONFIG_SYS_CLK_FREQ	((CFG_HZ_CLOCK * (CFG_DAVINCI_PLL1_PLLM + 1))/2)
-#define CFG_TIMERBASE		0x01c21400	/* use timer 0 */
-#define CFG_HZ_CLOCK		27000000	/* Timer Input clock freq */
-#define CFG_HZ			1000
-#define CFG_DAVINCI_PINMUX_0	0x00000c1f
-#define CFG_DAVINCI_WAITCFG	0x10000000
-#define CFG_DAVINCI_ACFG2	0x00460385	/* NOR CE Config */
-#define CFG_DAVINCI_ACFG3	0x0822218c	/* NAND CE Config */
-#define CFG_DAVINCI_ACFG4	0x3ffffffd
-#define CFG_DAVINCI_ACFG5	0x3ffffffd
-#define CFG_DAVINCI_NANDCE	3		/* Use CE3 for NAND */
-#define CFG_DAVINCI_DDRCTL	0x50006405	/* DDR timing config */
-#define CFG_DAVINCI_SDREF	0x000005c3
-#define CFG_DAVINCI_SDCFG	0x00178832	/* 8 banks , CAS = 4*/
-#define CFG_DAVINCI_SDTIM0	0x28923211
-#define CFG_DAVINCI_SDTIM1	0x0016c722
-#define CFG_DAVINCI_MMARG_BRF0	0x00444400
-/* DM6446 = 0x15, DM6441 = 0x12, DM6441_LV = 0x0e */
-#define CFG_DAVINCI_PLL1_PLLM	0x12
-#define CFG_DAVINCI_PLL2_PLLM	0x17		/* 162 MHz */
-#define CFG_DAVINCI_PLL2_DIV1	0x0b		/* 54 MHz */
-#define CFG_DAVINCI_PLL2_DIV2	0x01
-/*====================================================*/
-/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
-/* on Sonata/DV_EVM board. No EEPROM on schmoogie.    */
-/*====================================================*/
-#define CFG_I2C_EEPROM_ADDR_LEN		2
-#define CFG_I2C_EEPROM_ADDR		0x50
-#define CFG_EEPROM_PAGE_WRITE_BITS	6
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	20
-/*=============*/
-/* Memory Info */
-/*=============*/
-#define CFG_MALLOC_LEN		(0x10000 + 128*1024)	/* malloc() len */
-#define CFG_GBL_DATA_SIZE	128		/* reserved for initial data */
-#define CFG_MEMTEST_START	0x80000000	/* memtest start address */
-#define CFG_MEMTEST_END		0x81000000	/* 16MB RAM test */
-#define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of DRAM */
-#define CONFIG_STACKSIZE	(256*1024)	/* regular stack */
-#define PHYS_SDRAM_1		0x80000000	/* DDR Start */
-#define PHYS_SDRAM_1_SIZE	0x10000000	/* DDR size 256MB */
-#define DDR_8BANKS				/* 8-bank DDR2 (256MB) */
-/*====================*/
-/* Serial Driver info */
-/*====================*/
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	4		/* NS16550 register size */
-#define CFG_NS16550_COM1	0x01c20000	/* Base address of UART0 */
-#define CFG_NS16550_COM2	0x01c20800	/* Base address of UART2 */
-#define CFG_NS16550_CLK		27000000	/* Input clock to NS16550 */
-#define CONFIG_CONS_INDEX	1		/* use UART0 for console */
-#define CONFIG_BAUDRATE		115200		/* Default baud rate */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-/*===================*/
-/* I2C Configuration */
-/*===================*/
-#define CONFIG_HARD_I2C
-#define CONFIG_DRIVER_DAVINCI_I2C
-#define CFG_I2C_SPEED		50000	/* 100Kbps won't work, silicon bug */
-#define CFG_I2C_SLAVE		10	/* Bogus, master-only in U-Boot */
-/*==================================*/
-/* Network & Ethernet Configuration */
-/*==================================*/
-#define CONFIG_DRIVER_TI_EMAC
-#define CONFIG_MII
-#define CONFIG_BOOTP_DEFAULT
-#define CONFIG_BOOTP_DNS
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_NET_RETRY_COUNT	10
-/*=====================*/
-/* Flash & Environment */
-/*=====================*/
-#define CFG_USE_NAND
-#define CFG_NAND_BASE		0x04000000
-#undef CFG_NAND_HW_ECC
-#define CFG_MAX_NAND_DEVICE	1		/* Max number of NAND devices */
-#define NAND_MAX_CHIPS		1
-#define DEF_BOOTM		""
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_FLASH_CFI_DRIVER
-#define CFG_FLASH_CFI
-#define CFG_MAX_FLASH_BANKS	1		/* max number of flash banks */
-#define CFG_ENV_ADDR		(PHYS_FLASH_1 + 0x40000)
-#define CFG_ENV_OFFSET		(CFG_ENV_ADDR)
-#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster)*/
-#define PHYS_FLASH_1		0x02000000	/* CS2 Base address */
-#define CFG_FLASH_BASE		PHYS_FLASH_1	/* Flash Base for U-Boot */
-#define PHYS_FLASH_SIZE		0x2000000	/* Flash size 32MB */
-#define CFG_MAX_FLASH_SECT	(PHYS_FLASH_SIZE/CFG_FLASH_SECT_SZ)
-#define CFG_ENV_SECT_SIZE	CFG_FLASH_SECT_SZ	/* Env sector Size */
-#define CFG_FLASH_SECT_SZ	0x20000	/* 128KB sect size INTEL Flash */
-#define CFG_FLASH_PROTECTION	1
-/*==============================*/
-/* U-Boot general configuration */
-/*==============================*/
-#undef CONFIG_USE_IRQ				/* No IRQ/FIQ in U-Boot */
-#define CONFIG_MISC_INIT_R
-#define CONFIG_BOOTFILE		"uImage"	/* Boot file name */
-#define CFG_PROMPT		"U-Boot > "	/* Monitor Command Prompt */
-#define CFG_CBSIZE		1024		/* Console I/O Buffer Size  */
-#define CFG_PBSIZE	(CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buffer sz */
-#define CFG_MAXARGS	16		/* max number of command args */
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
-#define CFG_LOAD_ADDR	0x80700000 /* default Linux kernel load address */
-#define CONFIG_VERSION_VARIABLE
-#define CONFIG_AUTO_COMPLETE	/* Won't work with hush so far, may be later */
-#define CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
-#define CONFIG_CMDLINE_EDITING
-#define CFG_LONGHELP
-#define CONFIG_CRC32_VERIFY
-#define CONFIG_MX_CYCLIC
-#define CONFIG_ENV_OVERWRITE
-/*===================*/
-/* Linux Information */
-/*===================*/
-#define LINUX_BOOT_PARAM_ADDR	0x80000100
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_BOOTDELAY	2
-#define CONFIG_BOOTARGS	\
-	"mem=120M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp"
-#define CONFIG_BOOTCOMMAND	"run nand"
-#define CONFIG_EXTRA_ENV_SETTINGS "ethaddr=00:11:22:33:44:55\n"
-/*=================*/
-/* U-Boot commands */
-/*=================*/
-#include <config_cmd_default.h>
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_EEPROM
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_SETGETDCR
-#define CONFIG_CMD_FLASH
-#undef CONFIG_CMD_IMLS
-#define CONFIG_CMD_NAND
-/*=======================*/
-/* KGDB support (if any) */
-/*=======================*/
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	1	/* which serial port to use */
-#endif
-#endif /* __CONFIG_H */