85xx: Added support for multicore boot mechanism

Added the cpu command that provides a generic mechanism to get status,
reset, and release secondary cores in multicore processors.

Added support for using the ePAPR defined spin-table mechanism on 85xx.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

1 files changed, 148 insertions, 0 deletions

diff --git a/cpu/mpc85xx/release.S b/cpu/mpc85xx/release.S
new file mode 100644
index 000000000..fe1775cdc
--- /dev/null
+++ b/cpu/mpc85xx/release.S
@@ -0,0 +1,148 @@
+#include <config.h>
+#include <mpc85xx.h>
+#include <version.h>
+
+#define _LINUX_CONFIG_H 1	/* avoid reading Linux autoconf.h file	*/
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+/* To boot secondary cpus, we need a place for them to start up.
+ * Normally, they start at 0xfffffffc, but that's usually the
+ * firmware, and we don't want to have to run the firmware again.
+ * Instead, the primary cpu will set the BPTR to point here to
+ * this page.  We then set up the core, and head to
+ * start_secondary.  Note that this means that the code below
+ * must never exceed 1023 instructions (the branch at the end
+ * would then be the 1024th).
+ */
+	.globl	__secondary_start_page
+	.align	12
+__secondary_start_page:
+/* First do some preliminary setup */
+	lis	r3, HID0_EMCP@h		/* enable machine check */
+	ori	r3,r3,HID0_TBEN@l	/* enable Timebase */
+#ifdef CONFIG_PHYS_64BIT
+	ori	r3,r3,HID0_ENMAS7@l	/* enable MAS7 updates */
+#endif
+	mtspr	SPRN_HID0,r3
+
+	li	r3,(HID1_ASTME|HID1_ABE)@l	/* Addr streaming & broadcast */
+	mtspr	SPRN_HID1,r3
+
+	/* Enable branch prediction */
+	li	r3,0x201
+	mtspr	SPRN_BUCSR,r3
+
+	/* Enable/invalidate the I-Cache */
+	mfspr	r0,SPRN_L1CSR1
+	ori	r0,r0,(L1CSR1_ICFI|L1CSR1_ICE)
+	mtspr	SPRN_L1CSR1,r0
+	isync
+
+	/* Enable/invalidate the D-Cache */
+	mfspr	r0,SPRN_L1CSR0
+	ori	r0,r0,(L1CSR0_DCFI|L1CSR0_DCE)
+	msync
+	isync
+	mtspr	SPRN_L1CSR0,r0
+	isync
+
+#define toreset(x) (x - __secondary_start_page + 0xfffff000)
+
+	/* get our PIR to figure out our table entry */
+	lis	r3,toreset(__spin_table)@h
+	ori	r3,r3,toreset(__spin_table)@l
+
+	/* r9 has the base address for the entry */
+	mfspr	r0,SPRN_PIR
+	mr	r4,r0
+	slwi	r8,r4,4
+	slwi	r9,r4,3
+	add	r8,r8,r9
+	add	r9,r3,r8
+
+#define EPAPR_MAGIC	(0x65504150)
+#define ENTRY_ADDR	0
+#define ENTRY_PIR	4
+#define ENTRY_R3	8
+#define ENTRY_R4	12
+#define ENTRY_R6	16
+#define ENTRY_R7	20
+
+	/* setup the entry */
+	li	r4,0
+	li	r8,1
+	lis	r6,EPAPR_MAGIC@h
+	ori	r6,r6,EPAPR_MAGIC@l
+	stw	r0,ENTRY_PIR(r9)
+	stw	r8,ENTRY_ADDR(r9)
+	stw	r4,ENTRY_R3(r9)
+	stw	r4,ENTRY_R4(r9)
+	stw	r6,ENTRY_R6(r9)
+	stw	r4,ENTRY_R7(r9)
+
+	/* spin waiting for addr */
+1:	lwz	r4,ENTRY_ADDR(r9)
+	andi.	r11,r4,1
+	bne	1b
+
+	/* setup branch addr */
+	mtctr	r4
+
+	/* mark the entry as released */
+	li	r8,3
+	stw	r8,ENTRY_ADDR(r9)
+
+	/* mask by ~64M to setup our tlb we will jump to */
+	rlwinm	r8,r4,0,0,5
+
+	/* setup r3, r5, r6, r7 */
+	lwz	r3,ENTRY_R3(r9)
+	lwz	r4,ENTRY_R4(r9)
+	li	r5,0
+	lwz	r6,ENTRY_R6(r9)
+	lwz	r7,ENTRY_R7(r9)
+
+	/* load up the pir */
+	lwz	r0,ENTRY_PIR(r9)
+	mtspr	SPRN_PIR,r0
+	mfspr	r0,SPRN_PIR
+	stw	r0,ENTRY_PIR(r9)
+
+/*
+ * Coming here, we know the cpu has one TLB mapping in TLB1[0]
+ * which maps 0xfffff000-0xffffffff one-to-one.  We set up a
+ * second mapping that maps addr 1:1 for 64M, and then we jump to
+ * addr
+ */
+	lis	r9,(MAS0_TLBSEL(1)|MAS0_ESEL(1))@h
+	mtspr	SPRN_MAS0,r9
+	lis	r9,(MAS1_VALID|MAS1_IPROT)@h
+	ori	r9,r9,(MAS1_TSIZE(BOOKE_PAGESZ_64M))@l
+	mtspr	SPRN_MAS1,r9
+	/* WIMGE = 0b00000 for now */
+	mtspr	SPRN_MAS2,r8
+	ori	r8,r8,(MAS3_SX|MAS3_SW|MAS3_SR)
+	mtspr	SPRN_MAS3,r8
+	tlbwe
+
+/* Now we have another mapping for this page, so we jump to that
+ * mapping
+ */
+	bctr
+
+	.align 3
+	.globl __spin_table
+__spin_table:
+	.space CONFIG_NR_CPUS*24
+
+	/* Fill in the empty space.  The actual reset vector is
+	 * the last word of the page */
+__secondary_start_code_end:
+	.space 4092 - (__secondary_start_code_end - __secondary_start_page)
+__secondary_reset_vector:
+	b	__secondary_start_page