* Add support for ext2 filesystems and image timestamps to TQM5200 board

* Add reset code for Coral-P on INKA4x0 board

* Patch by Martin Krause, 28 Jun 2004:
  Update for TRAB board.

* Fix some missing "volatile"s in MPC5xxx FEC driver

3 files changed, 27 insertions, 20 deletions

diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 595bd292b..6be47877d 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -132,7 +132,7 @@
 
 /* IDE */
 #if defined (CONFIG_MINIFAP) || defined (CONFIG_STK52XX)
-#define ADD_IDE_CMD		CFG_CMD_IDE | CFG_CMD_FAT
+#define ADD_IDE_CMD		(CFG_CMD_IDE | CFG_CMD_FAT | CFG_CMD_EXT2)
 #else
 #define ADD_IDE_CMD		0
 #endif
@@ -141,20 +141,25 @@
  * Supported commands
  */
 #define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
-				CFG_CMD_EEPROM	| \
-				CFG_CMD_I2C	| \
+				ADD_IDE_CMD	| \
 				ADD_PCI_CMD	| \
 				ADD_USB_CMD	| \
-				CFG_CMD_POST_DIAG | \
+				CFG_CMD_ASKENV	| \
 				CFG_CMD_DATE	| \
-				CFG_CMD_REGINFO | \
+				CFG_CMD_DHCP	| \
+				CFG_CMD_ECHO	| \
+				CFG_CMD_EEPROM	| \
+				CFG_CMD_I2C	| \
 				CFG_CMD_MII	| \
 				CFG_CMD_PING	| \
-				ADD_IDE_CMD)
+				CFG_CMD_POST_DIAG | \
+				CFG_CMD_REGINFO )
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
 
+#define	CONFIG_TIMESTAMP		/* display image timestamps */
+
 #if (TEXT_BASE == 0xFC000000)		/* Boot low */
 #   define CFG_LOWBOOT		1
 #endif
diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h
index eb1256a5d..da2e37d21 100644
--- a/include/configs/inka4x0.h
+++ b/include/configs/inka4x0.h
@@ -29,25 +29,27 @@
  * (easy to change)
  */
 
-#define CONFIG_MPC5xxx		1	/* This is an MPC5xxx CPU */
-#define CONFIG_MPC5200		1	/* (more precisely an MPC5200 CPU) */
-#define CONFIG_INKA4X0		1	/* INKA4x0 board */
+#define CONFIG_MPC5xxx		1	/* This is an MPC5xxx CPU		*/
+#define CONFIG_MPC5200		1	/* (more precisely an MPC5200 CPU)	*/
+#define CONFIG_INKA4X0		1	/* INKA4x0 board			*/
 
-#define CFG_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
+#define CFG_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz		*/
 
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM		0x02	/* Software reboot	     */
+#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+#define CONFIG_MISC_INIT_F	1	/* Use misc_init_f()			*/
+
+#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs			*/
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
 /*
  * Serial console configuration
  */
-#define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
-#define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
+#define CONFIG_PSC_CONSOLE	1	/* console is on PSC1	*/
+#define CONFIG_BAUDRATE		115200	/* ... at 115200 bps	*/
 #define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*
@@ -265,7 +267,7 @@
  *-----------------------------------------------------------------------
  */
 #define CONFIG_USB_OHCI
-#define CONFIG_USB_CLOCK        0x00015555
-#define CONFIG_USB_CONFIG       0x00001000
+#define CONFIG_USB_CLOCK	0x00015555
+#define CONFIG_USB_CONFIG	0x00001000
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/trab.h b/include/configs/trab.h
index 55a6f69fc..59cd1d4ff 100644
--- a/include/configs/trab.h
+++ b/include/configs/trab.h
@@ -290,10 +290,10 @@
 #endif /* CFG_HUSH_PARSER */
 #endif	/* CONFIG_FLASH_8MB */
 
-#if 0	/* disabled for development */
+#if 1	/* feel free to disable for development */
 #define	CONFIG_AUTOBOOT_KEYED		/* Enable password protection	*/
 #define CONFIG_AUTOBOOT_PROMPT	"\nEnter password - autoboot in %d sec...\n"
-#define CONFIG_AUTOBOOT_DELAY_STR	"system"	/* 1st password	*/
+#define CONFIG_AUTOBOOT_DELAY_STR	"R"	/* 1st "password"	*/
 #endif
 
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)