diff options
Diffstat (limited to 'board/bf537-stamp/bf537-stamp.c')
| -rw-r--r-- | board/bf537-stamp/bf537-stamp.c | 313 |
1 files changed, 55 insertions, 258 deletions
diff --git a/board/bf537-stamp/bf537-stamp.c b/board/bf537-stamp/bf537-stamp.c index 5b619be11..16ffe2f1d 100644 --- a/board/bf537-stamp/bf537-stamp.c +++ b/board/bf537-stamp/bf537-stamp.c @@ -1,7 +1,7 @@ /* - * U-boot - BF537.c + * U-boot - main board file * - * Copyright (c) 2005-2007 Analog Devices Inc. + * Copyright (c) 2005-2008 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -29,15 +29,13 @@ #include <config.h> #include <command.h> #include <asm/blackfin.h> -#include <asm/io.h> +#include <asm/net.h> #include <net.h> #include <asm/mach-common/bits/bootrom.h> #include <netdev.h> DECLARE_GLOBAL_DATA_PTR; -#define POST_WORD_ADDR 0xFF903FFC - int checkboard(void) { printf("Board: ADI BF537 stamp board\n"); @@ -89,22 +87,63 @@ phys_size_t initdram(int board_type) return gd->bd->bi_memsize; } +void board_reset(void) +{ + /* workaround for weak pull ups on ssel */ + if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) { + bfin_write_PORTF_FER(bfin_read_PORTF_FER() & ~PF10); + bfin_write_PORTFIO_SET(PF10); + udelay(1); + } +} + +#ifdef CONFIG_BFIN_MAC +static void board_init_enetaddr(uchar *mac_addr) +{ +#ifdef CONFIG_SYS_NO_FLASH +# define USE_MAC_IN_FLASH 0 +#else +# define USE_MAC_IN_FLASH 1 +#endif + bool valid_mac = false; + + if (USE_MAC_IN_FLASH) { + /* we cram the MAC in the last flash sector */ + uchar *board_mac_addr = (uchar *)0x203F0000; + if (is_valid_ether_addr(board_mac_addr)) { + memcpy(mac_addr, board_mac_addr, 6); + valid_mac = true; + } + } + + if (!valid_mac) { + puts("Warning: Generating 'random' MAC address\n"); + bfin_gen_rand_mac(mac_addr); + } + + eth_setenv_enetaddr("ethaddr", mac_addr); +} + +int board_eth_init(bd_t *bis) +{ + return bfin_EMAC_initialize(bis); +} +#endif + #if defined(CONFIG_MISC_INIT_R) /* miscellaneous platform dependent initialisations */ int misc_init_r(void) { -#if defined(CONFIG_CMD_NET) - char nid[32]; - unsigned char *pMACaddr = (unsigned char *)0x203F0000; +#ifdef CONFIG_BFIN_MAC + uchar enetaddr[6]; + if (!eth_getenv_enetaddr("ethaddr", enetaddr)) + board_init_enetaddr(enetaddr); +#endif - /* The 0xFF check here is to make sure we don't use the address - * in flash if it's simply been erased (aka all 0xFF values) */ - if (getenv("ethaddr") == NULL && is_valid_ether_addr(pMACaddr)) { - sprintf(nid, "%02x:%02x:%02x:%02x:%02x:%02x", - pMACaddr[0], pMACaddr[1], - pMACaddr[2], pMACaddr[3], pMACaddr[4], pMACaddr[5]); - setenv("ethaddr", nid); - } +#ifndef CONFIG_SYS_NO_FLASH + /* we use the last sector for the MAC address / POST LDR */ + extern flash_info_t flash_info[]; + flash_protect(FLAG_PROTECT_SET, 0x203F0000, 0x203FFFFF, &flash_info[0]); #endif #if defined(CONFIG_BFIN_IDE) @@ -126,245 +165,3 @@ int misc_init_r(void) return 0; } #endif /* CONFIG_MISC_INIT_R */ - -#if defined(CONFIG_BFIN_MAC) - -int board_eth_init(bd_t *bis) -{ - return bfin_EMAC_initialize(bis); -} -#endif - -#ifdef CONFIG_POST -/* Using sw10-PF5 as the hotkey */ -int post_hotkeys_pressed(void) -{ - int delay = 3; - int i; - unsigned short value; - - *pPORTF_FER &= ~PF5; - *pPORTFIO_DIR &= ~PF5; - *pPORTFIO_INEN |= PF5; - - printf("########Press SW10 to enter Memory POST########: %2d ", delay); - while (delay--) { - for (i = 0; i < 100; i++) { - value = *pPORTFIO & PF5; - if (value != 0) { - break; - } - udelay(10000); - } - printf("\b\b\b%2d ", delay); - } - printf("\b\b\b 0"); - printf("\n"); - if (value == 0) - return 0; - else { - printf("Hotkey has been pressed, Enter POST . . . . . .\n"); - return 1; - } -} -#endif - -#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER) -void post_word_store(ulong a) -{ - volatile ulong *save_addr = (volatile ulong *)POST_WORD_ADDR; - *save_addr = a; -} - -ulong post_word_load(void) -{ - volatile ulong *save_addr = (volatile ulong *)POST_WORD_ADDR; - return *save_addr; -} -#endif - -#ifdef CONFIG_POST -int uart_post_test(int flags) -{ - return 0; -} - -#define BLOCK_SIZE 0x10000 -#define VERIFY_ADDR 0x2000000 -extern int erase_block_flash(int); -extern int write_data(long lStart, long lCount, uchar * pnData); -int flash_post_test(int flags) -{ - unsigned short *pbuf, *temp; - int offset, n, i; - int value = 0; - int result = 0; - printf("\n"); - pbuf = (unsigned short *)VERIFY_ADDR; - temp = pbuf; - for (n = FLASH_START_POST_BLOCK; n < FLASH_END_POST_BLOCK; n++) { - offset = (n - 7) * BLOCK_SIZE; - printf("--------Erase block:%2d..", n); - erase_block_flash(n); - printf("OK\r"); - printf("--------Program block:%2d...", n); - write_data(CONFIG_SYS_FLASH_BASE + offset, BLOCK_SIZE, pbuf); - printf("OK\r"); - printf("--------Verify block:%2d...", n); - for (i = 0; i < BLOCK_SIZE; i += 2) { - if (*(unsigned short *)(CONFIG_SYS_FLASH_BASE + offset + i) != - *temp++) { - value = 1; - result = 1; - } - } - if (value) - printf("failed\n"); - else - printf("OK %3d%%\r", - (int)( - (n + 1 - - FLASH_START_POST_BLOCK) * - 100 / (FLASH_END_POST_BLOCK - - FLASH_START_POST_BLOCK))); - - temp = pbuf; - value = 0; - } - printf("\n"); - if (result) - return -1; - else - return 0; -} - -/**************************************************** - * LED1 ---- PF6 LED2 ---- PF7 * - * LED3 ---- PF8 LED4 ---- PF9 * - * LED5 ---- PF10 LED6 ---- PF11 * - ****************************************************/ -int led_post_test(int flags) -{ - *pPORTF_FER &= ~(PF6 | PF7 | PF8 | PF9 | PF10 | PF11); - *pPORTFIO_DIR |= PF6 | PF7 | PF8 | PF9 | PF10 | PF11; - *pPORTFIO_INEN &= ~(PF6 | PF7 | PF8 | PF9 | PF10 | PF11); - *pPORTFIO &= ~(PF6 | PF7 | PF8 | PF9 | PF10 | PF11); - udelay(1000000); - printf("LED1 on"); - *pPORTFIO |= PF6; - udelay(1000000); - printf("\b\b\b\b\b\b\b"); - printf("LED2 on"); - *pPORTFIO |= PF7; - udelay(1000000); - printf("\b\b\b\b\b\b\b"); - printf("LED3 on"); - *pPORTFIO |= PF8; - udelay(1000000); - printf("\b\b\b\b\b\b\b"); - printf("LED4 on"); - *pPORTFIO |= PF9; - udelay(1000000); - printf("\b\b\b\b\b\b\b"); - printf("LED5 on"); - *pPORTFIO |= PF10; - udelay(1000000); - printf("\b\b\b\b\b\b\b"); - printf("lED6 on"); - *pPORTFIO |= PF11; - printf("\b\b\b\b\b\b\b "); - return 0; -} - -/************************************************ - * SW10 ---- PF5 SW11 ---- PF4 * - * SW12 ---- PF3 SW13 ---- PF2 * - ************************************************/ -int button_post_test(int flags) -{ - int i, delay = 5; - unsigned short value = 0; - int result = 0; - - *pPORTF_FER &= ~(PF5 | PF4 | PF3 | PF2); - *pPORTFIO_DIR &= ~(PF5 | PF4 | PF3 | PF2); - *pPORTFIO_INEN |= (PF5 | PF4 | PF3 | PF2); - - printf("\n--------Press SW10: %2d ", delay); - while (delay--) { - for (i = 0; i < 100; i++) { - value = *pPORTFIO & PF5; - if (value != 0) { - break; - } - udelay(10000); - } - printf("\b\b\b%2d ", delay); - } - if (value != 0) - printf("\b\bOK"); - else { - result = -1; - printf("\b\bfailed"); - } - - delay = 5; - printf("\n--------Press SW11: %2d ", delay); - while (delay--) { - for (i = 0; i < 100; i++) { - value = *pPORTFIO & PF4; - if (value != 0) { - break; - } - udelay(10000); - } - printf("\b\b\b%2d ", delay); - } - if (value != 0) - printf("\b\bOK"); - else { - result = -1; - printf("\b\bfailed"); - } - - delay = 5; - printf("\n--------Press SW12: %2d ", delay); - while (delay--) { - for (i = 0; i < 100; i++) { - value = *pPORTFIO & PF3; - if (value != 0) { - break; - } - udelay(10000); - } - printf("\b\b\b%2d ", delay); - } - if (value != 0) - printf("\b\bOK"); - else { - result = -1; - printf("\b\bfailed"); - } - - delay = 5; - printf("\n--------Press SW13: %2d ", delay); - while (delay--) { - for (i = 0; i < 100; i++) { - value = *pPORTFIO & PF2; - if (value != 0) { - break; - } - udelay(10000); - } - printf("\b\b\b%2d ", delay); - } - if (value != 0) - printf("\b\bOK"); - else { - result = -1; - printf("\b\bfailed"); - } - printf("\n"); - return result; -} -#endif |