diff options
Diffstat (limited to 'board/esd/pmc440')
| -rw-r--r-- | board/esd/pmc440/cmd_pmc440.c | 84 | ||||
| -rw-r--r-- | board/esd/pmc440/config.mk | 2 | ||||
| -rw-r--r-- | board/esd/pmc440/fpga.c | 5 | ||||
| -rw-r--r-- | board/esd/pmc440/init.S | 26 | ||||
| -rw-r--r-- | board/esd/pmc440/pmc440.c | 204 | ||||
| -rw-r--r-- | board/esd/pmc440/pmc440.h | 21 | ||||
| -rw-r--r-- | board/esd/pmc440/sdram.c | 2 | ||||
| -rw-r--r-- | board/esd/pmc440/u-boot-nand.lds | 3 | ||||
| -rw-r--r-- | board/esd/pmc440/u-boot.lds | 3 |
9 files changed, 226 insertions, 124 deletions
diff --git a/board/esd/pmc440/cmd_pmc440.c b/board/esd/pmc440/cmd_pmc440.c index ca5c177e3..16c9c7eea 100644 --- a/board/esd/pmc440/cmd_pmc440.c +++ b/board/esd/pmc440/cmd_pmc440.c @@ -26,6 +26,9 @@ #include <asm/io.h> #include <asm/cache.h> #include <asm/processor.h> +#if defined(CONFIG_LOGBUFFER) +#include <logbuff.h> +#endif #include "pmc440.h" @@ -323,7 +326,7 @@ int do_setup_bootstrap_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[] } printf("Writing boot EEPROM ...\n"); - if (bootstrap_eeprom_write(CFG_I2C_BOOT_EEPROM_ADDR, + if (bootstrap_eeprom_write(CONFIG_SYS_I2C_BOOT_EEPROM_ADDR, 0, (uchar*)sdsdp, count) != 0) printf("bootstrap_eeprom_write failed\n"); else @@ -343,14 +346,11 @@ extern env_t *env_ptr; int do_painit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { - u32 memsize; - u32 pram, env_base; + u32 pram, nextbase, base; char *v; u32 param; ulong *lptr; - memsize = gd->bd->bi_memsize; - v = getenv("pram"); if (v) pram = simple_strtoul(v, NULL, 10); @@ -359,21 +359,42 @@ int do_painit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return 1; } - param = memsize - (pram << 10); + base = gd->bd->bi_memsize; +#if defined(CONFIG_LOGBUFFER) + base -= LOGBUFF_LEN + LOGBUFF_OVERHEAD; +#endif + /* + * gd->bd->bi_memsize == physical ram size - CONFIG_SYS_MEM_TOP_HIDE + */ + param = base - (pram << 10); printf("PARAM: @%08x\n", param); + debug("memsize=0x%08x, base=0x%08x\n", gd->bd->bi_memsize, base); + /* clear entire PA ram */ memset((void*)param, 0, (pram << 10)); - env_base = memsize - 4096 - ((CFG_ENV_SIZE + 4096) & ~(4096-1)); - memcpy((void*)env_base, env_ptr, CFG_ENV_SIZE); - lptr = (ulong*)memsize; - *(--lptr) = CFG_ENV_SIZE; - *(--lptr) = memsize - env_base; - *(--lptr) = crc32(0, (void*)(memsize - 0x08), 0x08); - *(--lptr) = 0; + /* reserve 4k for pointer field */ + nextbase = base - 4096; + lptr = (ulong*)(base); + + /* + * *(--lptr) = item_size; + * *(--lptr) = base - item_base = distance from field top; + */ + + /* env is first (4k aligned) */ + nextbase -= ((CONFIG_ENV_SIZE + 4096 - 1) & ~(4096 - 1)); + memcpy((void*)nextbase, env_ptr, CONFIG_ENV_SIZE); + *(--lptr) = CONFIG_ENV_SIZE; /* size */ + *(--lptr) = base - nextbase; /* offset | type=0 */ + + /* free section */ + *(--lptr) = nextbase - param; /* size */ + *(--lptr) = (base - param) | 126; /* offset | type=126 */ - /* make sure data can be accessed through PCI */ - flush_dcache_range(param, param + (pram << 10) - 1); + /* terminate pointer field */ + *(--lptr) = crc32(0, (void*)(base - 0x10), 0x10); + *(--lptr) = 0; /* offset=0 -> terminator */ return 0; } U_BOOT_CMD( @@ -385,28 +406,11 @@ U_BOOT_CMD( int do_selfreset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { - if (argc > 1) { - if (argv[1][0] == '0') { - /* assert */ - printf("self-reset# asserted\n"); - out_be32((void*)GPIO0_TCR, - in_be32((void*)GPIO0_TCR) | GPIO0_SELF_RST); - } else { - /* deassert */ - printf("self-reset# deasserted\n"); - out_be32((void*)GPIO0_TCR, - in_be32((void*)GPIO0_TCR) & ~GPIO0_SELF_RST); - } - } else { - printf("self-reset# is %s\n", - in_be32((void*)GPIO0_TCR) & GPIO0_SELF_RST ? - "active" : "inactive"); - } - + in_be32((void*)CONFIG_SYS_RESET_BASE); return 0; } U_BOOT_CMD( - selfreset, 2, 1, do_selfreset, + selfreset, 1, 1, do_selfreset, "selfreset- assert self-reset# signal\n", NULL ); @@ -513,7 +517,7 @@ U_BOOT_CMD( "<pciaddr> (pciaddr will be aligned to 256MB)\n" ); -#if defined(CFG_EEPROM_WREN) +#if defined(CONFIG_SYS_EEPROM_WREN) int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { int query = argc == 1; @@ -521,21 +525,21 @@ int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) if (query) { /* Query write access state. */ - state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, -1); + state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, -1); if (state < 0) { puts("Query of write access state failed.\n"); } else { printf("Write access for device 0x%0x is %sabled.\n", - CFG_I2C_EEPROM_ADDR, state ? "en" : "dis"); + CONFIG_SYS_I2C_EEPROM_ADDR, state ? "en" : "dis"); state = 0; } } else { if ('0' == argv[1][0]) { /* Disable write access. */ - state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, 0); + state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, 0); } else { /* Enable write access. */ - state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, 1); + state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, 1); } if (state < 0) { puts("Setup of write access state failed.\n"); @@ -547,6 +551,6 @@ int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, "eepwren - Enable / disable / query EEPROM write access\n", NULL); -#endif /* #if defined(CFG_EEPROM_WREN) */ +#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */ #endif /* CONFIG_CMD_BSP */ diff --git a/board/esd/pmc440/config.mk b/board/esd/pmc440/config.mk index e62b8d30e..0c4d58282 100644 --- a/board/esd/pmc440/config.mk +++ b/board/esd/pmc440/config.mk @@ -37,5 +37,5 @@ PLATFORM_CPPFLAGS += -DDEBUG endif ifeq ($(dbcr),1) -PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000 +PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000 endif diff --git a/board/esd/pmc440/fpga.c b/board/esd/pmc440/fpga.c index a35f42bd5..a2eda32ac 100644 --- a/board/esd/pmc440/fpga.c +++ b/board/esd/pmc440/fpga.c @@ -220,8 +220,9 @@ int fpga_post_config_fn(int cookie) FPGA_OUT32(&fpga->status, (gd->board_type << STATUS_HWREV_SHIFT) & STATUS_HWREV_MASK); - /* NGCC only: enable ledlink */ - if ((s = getenv("bd_type")) && !strcmp(s, "ngcc")) + /* NGCC/CANDES only: enable ledlink */ + if ((s = getenv("bd_type")) && + ((!strcmp(s, "ngcc")) || (!strcmp(s, "candes")))) FPGA_SETBITS(&fpga->ctrla, 0x29f8c000); return rc; diff --git a/board/esd/pmc440/init.S b/board/esd/pmc440/init.S index 148af71bb..26a8282ce 100644 --- a/board/esd/pmc440/init.S +++ b/board/esd/pmc440/init.S @@ -44,28 +44,28 @@ tlbtab: * speed up boot process. It is patched after relocation to enable SA_I */ #ifndef CONFIG_NAND_SPL - tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G ) + tlbentry( CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G ) #else - tlbentry( CFG_NAND_BOOT_SPL_SRC, SZ_4K, CFG_NAND_BOOT_SPL_SRC, 1, AC_R|AC_W|AC_X|SA_G ) + tlbentry( CONFIG_SYS_NAND_BOOT_SPL_SRC, SZ_4K, CONFIG_SYS_NAND_BOOT_SPL_SRC, 1, AC_R|AC_W|AC_X|SA_G ) #endif /* TLB-entry for DDR SDRAM (Up to 2GB) */ #ifdef CONFIG_4xx_DCACHE - tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G) + tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G) #else - tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I ) + tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I ) #endif -#ifdef CFG_INIT_RAM_DCACHE +#ifdef CONFIG_SYS_INIT_RAM_DCACHE /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */ - tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G ) + tlbentry( CONFIG_SYS_INIT_RAM_ADDR, SZ_64K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G ) #endif /* TLB-entry for PCI Memory */ - tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I ) + tlbentry( CONFIG_SYS_PCI_MEMBASE, SZ_256M, CONFIG_SYS_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I ) + tlbentry( CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I ) + tlbentry( CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I ) + tlbentry( CONFIG_SYS_PCI_MEMBASE3, SZ_256M, CONFIG_SYS_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I ) /* TLB-entries for EBC */ /* PMC440 maps EBC to 0xef000000 which is handled by the peripheral @@ -76,7 +76,7 @@ tlbtab: tlbentry( 0xc0000000, SZ_256M, 0xc0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) /* TLB-entry for NAND */ - tlbentry( CFG_NAND_ADDR, SZ_1K, CFG_NAND_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) + tlbentry( CONFIG_SYS_NAND_ADDR, SZ_1K, CONFIG_SYS_NAND_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) /* TLB-entry for Internal Registers & OCM */ tlbentry( 0xe0000000, SZ_16M, 0xe0000000, 0, AC_R|AC_W|AC_X|SA_I ) @@ -98,8 +98,8 @@ tlbtab: * For NAND booting the first TLB has to be reconfigured to full size * and with caching disabled after running from RAM! */ -#define TLB00 TLB0(CFG_BOOT_BASE_ADDR, SZ_256M) -#define TLB01 TLB1(CFG_BOOT_BASE_ADDR, 1) +#define TLB00 TLB0(CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M) +#define TLB01 TLB1(CONFIG_SYS_BOOT_BASE_ADDR, 1) #define TLB02 TLB2(AC_R|AC_W|AC_X|SA_G|SA_I) .globl reconfig_tlb0 diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c index 0cdaee445..382410534 100644 --- a/board/esd/pmc440/pmc440.c +++ b/board/esd/pmc440/pmc440.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2007-2008 + * (Cg) Copyright 2007-2008 * Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com. * Based on board/amcc/sequoia/sequoia.c * @@ -44,10 +44,12 @@ DECLARE_GLOBAL_DATA_PTR; -extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ +extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ +extern void __ft_board_setup(void *blob, bd_t *bd); ulong flash_get_size(ulong base, int banknum); int pci_is_66mhz(void); +int is_monarch(void); int bootstrap_eeprom_read(unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt); @@ -71,7 +73,7 @@ struct serial_device *default_serial_console(void) /* mark scratchreg valid */ scratchreg = (scratchreg & 0xffffff00) | 0x80; - i = bootstrap_eeprom_read(CFG_I2C_BOOT_EEPROM_ADDR, + i = bootstrap_eeprom_read(CONFIG_SYS_I2C_BOOT_EEPROM_ADDR, 0x10, buf, 4); if ((i != -1) && (buf[0] == 0x19) && (buf[1] == 0x75)) { scratchreg |= buf[2]; @@ -103,13 +105,13 @@ int board_early_init_f(void) /* * Setup the GPIO pins - * TODO: setup GPIOs via CFG_4xx_GPIO_TABLE in board's config file + * TODO: setup GPIOs via CONFIG_SYS_4xx_GPIO_TABLE in board's config file */ - out32(GPIO0_OR, 0x40000002); + out32(GPIO0_OR, 0x40000102); out32(GPIO0_TCR, 0x4c90011f); - out32(GPIO0_OSRL, 0x28011400); + out32(GPIO0_OSRL, 0x28051400); out32(GPIO0_OSRH, 0x55005000); - out32(GPIO0_TSRL, 0x08011400); + out32(GPIO0_TSRL, 0x08051400); out32(GPIO0_TSRH, 0x55005000); out32(GPIO0_ISR1L, 0x54000000); out32(GPIO0_ISR1H, 0x00000000); @@ -190,12 +192,29 @@ int board_early_init_f(void) SDR0_CUST0_NDFC_ENABLE | SDR0_CUST0_NDFC_BW_8_BIT | SDR0_CUST0_NDFC_ARE_MASK | - (0x80000000 >> (28 + CFG_NAND_CS)); + (0x80000000 >> (28 + CONFIG_SYS_NAND_CS)); mtsdr(SDR0_CUST0, sdr0_cust0); return 0; } +#if defined(CONFIG_MISC_INIT_F) +int misc_init_f(void) +{ + struct pci_controller hose; + hose.first_busno = 0; + hose.last_busno = 0; + hose.region_count = 0; + + if (getenv("pciearly") && (!is_monarch())) { + printf("PCI: early target init\n"); + pci_setup_indirect(&hose, PCIX0_CFGADR, PCIX0_CFGDATA); + pci_target_init(&hose); + } + return 0; +} +#endif + /* * misc_init_r. */ @@ -207,6 +226,7 @@ int misc_init_r(void) unsigned long usb2d0cr = 0; unsigned long usb2phy0cr, usb2h0cr = 0; unsigned long sdr0_pfc1; + unsigned long sdr0_srst0, sdr0_srst1; char *act = getenv("usbact"); /* @@ -239,24 +259,24 @@ int misc_init_r(void) */ flash_get_size(gd->bd->bi_flashstart, 0); -#ifdef CFG_ENV_IS_IN_FLASH +#ifdef CONFIG_ENV_IS_IN_FLASH /* Monitor protection ON by default */ (void)flash_protect(FLAG_PROTECT_SET, - -CFG_MONITOR_LEN, + -CONFIG_SYS_MONITOR_LEN, 0xffffffff, &flash_info[0]); /* Env protection ON by default */ (void)flash_protect(FLAG_PROTECT_SET, - CFG_ENV_ADDR_REDUND, - CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1, + CONFIG_ENV_ADDR_REDUND, + CONFIG_ENV_ADDR_REDUND + 2*CONFIG_ENV_SECT_SIZE - 1, &flash_info[0]); #endif /* * USB suff... */ - if ((act == NULL || strcmp(act, "hostdev") == 0) && + if ((act == NULL || strcmp(act, "host") == 0) && !(in_be32((void*)GPIO0_IR) & GPIO0_USB_PRSNT)){ /* SDR Setting */ mfsdr(SDR0_PFC1, sdr0_pfc1); @@ -290,12 +310,46 @@ int misc_init_r(void) mtsdr(SDR0_USB2PHY0CR, usb2phy0cr); mtsdr(SDR0_USB2H0CR, usb2h0cr); - /* clear resets */ + /* + * Take USB out of reset: + * -Initial status = all cores are in reset + * -deassert reset to OPB1, P4OPB0, OPB2, PLB42OPB1 OPB2PLB40 cores + * -wait 1 ms + * -deassert reset to PHY + * -wait 1 ms + * -deassert reset to HOST + * -wait 4 ms + * -deassert all other resets + */ + mfsdr(SDR0_SRST1, sdr0_srst1); + sdr0_srst1 &= ~(SDR0_SRST1_OPBA1 | \ + SDR0_SRST1_P4OPB0 | \ + SDR0_SRST1_OPBA2 | \ + SDR0_SRST1_PLB42OPB1 | \ + SDR0_SRST1_OPB2PLB40); + mtsdr(SDR0_SRST1, sdr0_srst1); + udelay(1000); + + mfsdr(SDR0_SRST1, sdr0_srst1); + sdr0_srst1 &= ~SDR0_SRST1_USB20PHY; + mtsdr(SDR0_SRST1, sdr0_srst1); udelay(1000); + + mfsdr(SDR0_SRST0, sdr0_srst0); + sdr0_srst0 &= ~SDR0_SRST0_USB2H; + mtsdr(SDR0_SRST0, sdr0_srst0); + udelay(4000); + + /* finally all the other resets */ mtsdr(SDR0_SRST1, 0x00000000); - udelay(1000); mtsdr(SDR0_SRST0, 0x00000000); + if (!(in_be32((void*)GPIO0_IR) & GPIO0_USB_PRSNT)) { + /* enable power on USB socket */ + out_be32((void*)GPIO1_OR, + in_be32((void*)GPIO1_OR) & ~GPIO1_USB_PWR_N); + } + printf("USB: Host\n"); } else if ((strcmp(act, "dev") == 0) || @@ -498,7 +552,7 @@ int pci_pre_init(struct pci_controller *hose) * inbound map (PIM). But the bootstrap config choices are limited and * may not be sufficient for a given board. */ -#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) +#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) void pci_target_init(struct pci_controller *hose) { char *ptmla_str, *ptmms_str; @@ -516,8 +570,8 @@ void pci_target_init(struct pci_controller *hose) */ out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute */ /* - disabled b4 setting */ - out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */ - out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */ + out32r(PCIX0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */ + out32r(PCIX0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */ out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ out32r(PCIX0_PMM0MA, 0xc0000001); /* 1G + No prefetching, */ /* and enable region */ @@ -547,14 +601,14 @@ void pci_target_init(struct pci_controller *hose) out32r(PCIX0_PTM2MS, simple_strtoul(ptmms_str, NULL, 16)); out32r(PCIX0_PTM2LA, simple_strtoul(ptmla_str, NULL, 16)); } else { - /* BAR2: default: 16 MB FPGA + registers */ - out32r(PCIX0_PTM2MS, 0xff000001); /* Memory Size/Attribute */ + /* BAR2: default: 4MB FPGA */ + out32r(PCIX0_PTM2MS, 0xffc00001); /* Memory Size/Attribute */ out32r(PCIX0_PTM2LA, 0xef000000); /* Local Addr. Reg */ } if (is_monarch()) { /* BAR2: map FPGA registers behind system memory at 1GB */ - pci_write_config_dword(0, PCI_BASE_ADDRESS_2, 0x40000008); + pci_hose_write_config_dword(hose, 0, PCI_BASE_ADDRESS_2, 0x40000008); } /* @@ -562,8 +616,8 @@ void pci_target_init(struct pci_controller *hose) */ /* Program the board's vendor id */ - pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID, - CFG_PCI_SUBSYS_VENDORID); + pci_hose_write_config_word(hose, 0, PCI_SUBSYSTEM_VENDOR_ID, + CONFIG_SYS_PCI_SUBSYS_VENDORID); /* disabled for PMC405 backward compatibility */ /* Configure command register as bus master */ @@ -571,19 +625,19 @@ void pci_target_init(struct pci_controller *hose) /* 240nS PCI clock */ - pci_write_config_word(0, PCI_LATENCY_TIMER, 1); + pci_hose_write_config_word(hose, 0, PCI_LATENCY_TIMER, 1); /* No error reporting */ - pci_write_config_word(0, PCI_ERREN, 0); + pci_hose_write_config_word(hose, 0, PCI_ERREN, 0); pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101); if (!is_monarch()) { /* Program the board's subsystem id/classcode */ - pci_write_config_word(0, PCI_SUBSYSTEM_ID, - CFG_PCI_SUBSYS_ID_NONMONARCH); - pci_write_config_word(0, PCI_CLASS_SUB_CODE, - CFG_PCI_CLASSCODE_NONMONARCH); + pci_hose_write_config_word(hose, 0, PCI_SUBSYSTEM_ID, + CONFIG_SYS_PCI_SUBSYS_ID_NONMONARCH); + pci_hose_write_config_word(hose, 0, PCI_CLASS_SUB_CODE, + CONFIG_SYS_PCI_CLASSCODE_NONMONARCH); /* PCI configuration done: release ERREADY */ out_be32((void*)GPIO1_OR, @@ -592,18 +646,21 @@ void pci_target_init(struct pci_controller *hose) in_be32((void*)GPIO1_TCR) | GPIO1_PPC_EREADY); } else { /* Program the board's subsystem id/classcode */ - pci_write_config_word(0, PCI_SUBSYSTEM_ID, - CFG_PCI_SUBSYS_ID_MONARCH); - pci_write_config_word(0, PCI_CLASS_SUB_CODE, - CFG_PCI_CLASSCODE_MONARCH); + pci_hose_write_config_word(hose, 0, PCI_SUBSYSTEM_ID, + CONFIG_SYS_PCI_SUBSYS_ID_MONARCH); + pci_hose_write_config_word(hose, 0, PCI_CLASS_SUB_CODE, + CONFIG_SYS_PCI_CLASSCODE_MONARCH); } + + /* enable host configuration */ + pci_hose_write_config_dword(hose, 0, PCI_BRDGOPT2, 0x00000101); } -#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */ +#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ /* * pci_master_init */ -#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) +#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) void pci_master_init(struct pci_controller *hose) { unsigned short temp_short; @@ -620,12 +677,18 @@ void pci_master_init(struct pci_controller *hose) PCI_COMMAND_MEMORY); } } -#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */ +#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */ static void wait_for_pci_ready(void) { int i; char *s = getenv("pcidelay"); + /* + * We have our own handling of the pcidelay variable. + * Using CONFIG_PCI_BOOTDELAY enables pausing for host + * and adapter devices. For adapter devices we do not + * want this. + */ if (s) { int ms = simple_strtoul(s, NULL, 10); printf("PCI: Waiting for %d ms\n", ms); @@ -692,23 +755,37 @@ int post_hotkeys_pressed(void) #ifdef CONFIG_RESET_PHY_R void reset_phy(void) { + char *s; + unsigned short val_method, val_behavior; + + /* special LED setup for NGCC/CANDES */ + if ((s = getenv("bd_type")) && + ((!strcmp(s, "ngcc")) || (!strcmp(s, "candes")))) { + val_method = 0x0e0a; + val_behavior = 0x0cf2; + } else { + /* PMC440 standard type */ + val_method = 0x0e10; + val_behavior = 0x0cf0; + } + if (miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x1f, 0x0001) == 0) { miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x11, 0x0010); - miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x11, 0x0df0); - miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x10, 0x0e10); + miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x11, val_behavior); + miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x10, val_method); miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x1f, 0x0000); } if (miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x1f, 0x0001) == 0) { miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x11, 0x0010); - miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x11, 0x0df0); - miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x10, 0x0e10); + miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x11, val_behavior); + miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x10, val_method); miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x1f, 0x0000); } } #endif -#if defined(CFG_EEPROM_WREN) +#if defined(CONFIG_SYS_EEPROM_WREN) /* * Input: <dev_addr> I2C address of EEPROM device to enable. * <state> -1: deliver current state @@ -720,8 +797,8 @@ void reset_phy(void) */ int eeprom_write_enable(unsigned dev_addr, int state) { - if ((CFG_I2C_EEPROM_ADDR != dev_addr) && - (CFG_I2C_BOOT_EEPROM_ADDR != dev_addr)) { + if ((CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) && + (CONFIG_SYS_I2C_BOOT_EEPROM_ADDR != dev_addr)) { return -1; } else { switch (state) { @@ -743,9 +820,9 @@ int eeprom_write_enable(unsigned dev_addr, int state) } return state; } -#endif /* #if defined(CFG_EEPROM_WREN) */ +#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */ -#define CFG_BOOT_EEPROM_PAGE_WRITE_BITS 3 +#define CONFIG_SYS_BOOT_EEPROM_PAGE_WRITE_BITS 3 int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt) { @@ -753,7 +830,7 @@ int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset, unsigned blk_off; int rcode = 0; -#if defined(CFG_EEPROM_WREN) +#if defined(CONFIG_SYS_EEPROM_WREN) eeprom_write_enable(dev_addr, 1); #endif /* @@ -776,7 +853,7 @@ int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset, len = end - offset; -#define BOOT_EEPROM_PAGE_SIZE (1 << CFG_BOOT_EEPROM_PAGE_WRITE_BITS) +#define BOOT_EEPROM_PAGE_SIZE (1 << CONFIG_SYS_BOOT_EEPROM_PAGE_WRITE_BITS) #define BOOT_EEPROM_PAGE_OFFSET(x) ((x) & (BOOT_EEPROM_PAGE_SIZE - 1)) maxlen = BOOT_EEPROM_PAGE_SIZE - @@ -793,11 +870,11 @@ int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset, buffer += len; offset += len; -#if defined(CFG_EEPROM_PAGE_WRITE_DELAY_MS) - udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000); +#if defined(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS) + udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000); #endif } -#if defined(CFG_EEPROM_WREN) +#if defined(CONFIG_SYS_EEPROM_WREN) eeprom_write_enable(dev_addr, 0); #endif return rcode; @@ -845,13 +922,13 @@ int bootstrap_eeprom_read (unsigned dev_addr, unsigned offset, return rcode; } -#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_BOARD_INIT) +#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_BOARD_INIT) int usb_board_init(void) { char *act = getenv("usbact"); int i; - if ((act == NULL || strcmp(act, "hostdev") == 0) && + if ((act == NULL || strcmp(act, "host") == 0) && !(in_be32((void*)GPIO0_IR) & GPIO0_USB_PRSNT)) /* enable power on USB socket */ out_be32((void*)GPIO1_OR, @@ -875,4 +952,25 @@ int usb_board_init_fail(void) usb_board_stop(); return 0; } -#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_BOARD_INIT) */ +#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_BOARD_INIT) */ + +#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ + int rc; + + __ft_board_setup(blob, bd); + + /* + * Disable PCI in non-monarch mode. + */ + if (!is_monarch()) { + rc = fdt_find_and_setprop(blob, "/plb/pci@1ec000000", "status", + "disabled", sizeof("disabled"), 1); + if (rc) { + printf("Unable to update property status in PCI node, err=%s\n", + fdt_strerror(rc)); + } + } +} +#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/esd/pmc440/pmc440.h b/board/esd/pmc440/pmc440.h index 7e70fd1cb..295cec1e3 100644 --- a/board/esd/pmc440/pmc440.h +++ b/board/esd/pmc440/pmc440.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2007 + * (C) Copyright 2007-2008 * Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com. * * See file CREDITS for list of people who contributed to this @@ -24,8 +24,7 @@ #ifndef __PMC440_H__ #define __PMC440_H__ - -/*----------------------------------------------------------------------- +/* * GPIOs */ #define GPIO1_INTA_FAKE (0x80000000 >> (45-32)) /* GPIO45 OD */ @@ -41,9 +40,10 @@ #define GPIO0_EP_EEP (0x80000000 >> 23) /* GPIO23 O */ #define GPIO0_USB_ID (0x80000000 >> 21) /* GPIO21 I */ #define GPIO0_USB_PRSNT (0x80000000 >> 20) /* GPIO20 I */ -#define GPIO0_SELF_RST (0x80000000 >> 6) /* GPIO6 OD */ -/* FPGA programming pin configuration */ +/* + * FPGA programming pin configuration + */ #define GPIO1_FPGA_PRG (0x80000000 >> (53-32)) /* FPGA program pin (ppc output) */ #define GPIO1_FPGA_CLK (0x80000000 >> (51-32)) /* FPGA clk pin (ppc output) */ #define GPIO1_FPGA_DATA (0x80000000 >> (52-32)) /* FPGA data pin (ppc output) */ @@ -51,10 +51,10 @@ #define GPIO1_FPGA_INIT (0x80000000 >> (54-32)) /* FPGA init pin (ppc input) */ #define GPIO0_FPGA_FORCEINIT (0x80000000 >> 27) /* low: force INIT# low */ -/*----------------------------------------------------------------------- +/* * FPGA interface */ -#define FPGA_BA CFG_FPGA_BASE0 +#define FPGA_BA CONFIG_SYS_FPGA_BASE0 #define FPGA_OUT32(p,v) out_be32(((void*)(p)), (v)) #define FPGA_IN32(p) in_be32((void*)(p)) #define FPGA_SETBITS(p,v) out_be32(((void*)(p)), in_be32((void*)(p)) | (v)) @@ -103,7 +103,6 @@ typedef struct pmc440_fpga_s pmc440_fpga_t; #define RESET_OUT (1 << 19) #define IRIGB_R_OUT (1 << 14) - /* status register */ #define STATUS_VERSION_SHIFT 24 #define STATUS_VERSION_MASK 0xff000000 @@ -115,13 +114,11 @@ typedef struct pmc440_fpga_s pmc440_fpga_t; #define STATUS_FIFO_ISF (1 << 9) #define STATUS_HOST_ISF (1 << 8) - /* inputs */ #define RESET_IN (1 << 0) #define CLOCK_IN (1 << 1) #define IRIGB_R_IN (1 << 5) - /* hostctrl register */ #define HOSTCTRL_PMCRSTOUT_GATE (1 << 17) #define HOSTCTRL_PMCRSTOUT_FLAG (1 << 16) @@ -134,10 +131,10 @@ typedef struct pmc440_fpga_s pmc440_fpga_t; #define HOSTCTRL_HCINT_GATE (1 << 1) #define HOSTCTRL_HCINT_FLAG (1 << 0) -#define NGCC_CTRL_BASE (CFG_FPGA_BASE0 + 0x80000) +#define NGCC_CTRL_BASE (CONFIG_SYS_FPGA_BASE0 + 0x80000) #define NGCC_CTRL_FPGARST_N (1 << 2) -/*----------------------------------------------------------------------- +/* * FPGA to PPC interrupt */ #define IRQ0_FPGA (32+28) /* UIC1 - FPGA internal */ diff --git a/board/esd/pmc440/sdram.c b/board/esd/pmc440/sdram.c index c7294c994..197857ad0 100644 --- a/board/esd/pmc440/sdram.c +++ b/board/esd/pmc440/sdram.c @@ -111,5 +111,5 @@ phys_size_t initdram (int board_type) */ set_mcsr(get_mcsr()); - return (CFG_MBYTES_SDRAM << 20); + return (CONFIG_SYS_MBYTES_SDRAM << 20); } diff --git a/board/esd/pmc440/u-boot-nand.lds b/board/esd/pmc440/u-boot-nand.lds index ae2e18de4..6e1e16997 100644 --- a/board/esd/pmc440/u-boot-nand.lds +++ b/board/esd/pmc440/u-boot-nand.lds @@ -57,7 +57,7 @@ SECTIONS /* Align to next NAND block */ . = ALIGN(0x4000); - common/environment.o (.ppcenv) + common/env_embedded.o (.ppcenv) /* Keep some space here for redundant env and potential bad env blocks */ . = ALIGN(0x10000); @@ -129,6 +129,7 @@ SECTIONS *(.dynbss) *(.bss) *(COMMON) + . = ALIGN(4); } _end = . ; diff --git a/board/esd/pmc440/u-boot.lds b/board/esd/pmc440/u-boot.lds index b20fb1c0a..05152b7f7 100644 --- a/board/esd/pmc440/u-boot.lds +++ b/board/esd/pmc440/u-boot.lds @@ -135,9 +135,10 @@ SECTIONS *(.dynbss) *(.bss) *(COMMON) + . = ALIGN(4); } - ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified."); + ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and TEXT_BASE may need to be modified."); _end = . ; PROVIDE (end = .); |