diff options
Diffstat (limited to 'board/freescale')
147 files changed, 2706 insertions, 6022 deletions
diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile index 508e3b569..02a824d9f 100644 --- a/board/freescale/common/Makefile +++ b/board/freescale/common/Makefile @@ -30,12 +30,12 @@ endif LIB = $(obj)lib$(VENDOR).a COBJS-${CONFIG_FSL_CADMUS} += cadmus.o -COBJS-${CONFIG_FSL_CDS_EEPROM} += cds_eeprom.o COBJS-${CONFIG_FSL_VIA} += cds_via.o COBJS-${CONFIG_FSL_DIU_FB} += fsl_diu_fb.o fsl_logo_bmp.o COBJS-${CONFIG_FSL_PIXIS} += pixis.o COBJS-${CONFIG_PQ_MDS_PIB} += pq-mds-pib.o COBJS-${CONFIG_ID_EEPROM} += sys_eeprom.o +COBJS-${CONFIG_FSL_SGMII_RISER} += sgmii_riser.o COBJS-${CONFIG_MPC8541CDS} += cds_pci_ft.o COBJS-${CONFIG_MPC8548CDS} += cds_pci_ft.o diff --git a/board/freescale/common/cadmus.c b/board/freescale/common/cadmus.c index 5f86de5af..db54bc4d5 100644 --- a/board/freescale/common/cadmus.c +++ b/board/freescale/common/cadmus.c @@ -27,8 +27,8 @@ /* * CADMUS Board System Registers */ -#ifndef CFG_CADMUS_BASE_REG -#define CFG_CADMUS_BASE_REG (CADMUS_BASE_ADDR + 0x4000) +#ifndef CONFIG_SYS_CADMUS_BASE_REG +#define CONFIG_SYS_CADMUS_BASE_REG (CADMUS_BASE_ADDR + 0x4000) #endif typedef struct cadmus_reg { @@ -47,7 +47,7 @@ typedef struct cadmus_reg { unsigned int get_board_version(void) { - volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CFG_CADMUS_BASE_REG; + volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CONFIG_SYS_CADMUS_BASE_REG; return cadmus->cm_ver; } @@ -56,7 +56,7 @@ get_board_version(void) unsigned long get_clock_freq(void) { - volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CFG_CADMUS_BASE_REG; + volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CONFIG_SYS_CADMUS_BASE_REG; uint pci1_speed = (cadmus->cm_pci >> 2) & 0x3; /* PSPEED in [4:5] */ @@ -74,7 +74,7 @@ get_clock_freq(void) unsigned int get_pci_slot(void) { - volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CFG_CADMUS_BASE_REG; + volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CONFIG_SYS_CADMUS_BASE_REG; /* * PCI slot in USER bits CSR[6:7] by convention. @@ -86,7 +86,7 @@ get_pci_slot(void) unsigned int get_pci_dual(void) { - volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CFG_CADMUS_BASE_REG; + volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CONFIG_SYS_CADMUS_BASE_REG; /* * PCI DUAL in CM_PCI[3] diff --git a/board/freescale/common/cds_eeprom.c b/board/freescale/common/cds_eeprom.c deleted file mode 100644 index 5034e0ca2..000000000 --- a/board/freescale/common/cds_eeprom.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * Copyright 2004 Freescale Semiconductor. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - - -#include <common.h> -#include <i2c.h> - -#include "eeprom.h" - - -typedef struct { - char idee_pcbid[4]; /* "CCID" for CDC v1.X */ - u8 idee_major; - u8 idee_minor; - char idee_serial[10]; - char idee_errata[2]; - char idee_date[8]; /* yyyymmdd */ - /* The rest of the EEPROM space is reserved */ -} id_eeprom_t; - - -unsigned int -get_cpu_board_revision(void) -{ - uint major = 0; - uint minor = 0; - - id_eeprom_t id_eeprom; - - i2c_read(CFG_I2C_EEPROM_ADDR, 0, 2, - (uchar *) &id_eeprom, sizeof(id_eeprom)); - - major = id_eeprom.idee_major; - minor = id_eeprom.idee_minor; - - if (major == 0xff && minor == 0xff) { - major = minor = 0; - } - - return MPC85XX_CPU_BOARD_REV(major,minor); -} diff --git a/board/freescale/common/fsl_diu_fb.c b/board/freescale/common/fsl_diu_fb.c index 75f782e9d..2fc878be8 100644 --- a/board/freescale/common/fsl_diu_fb.c +++ b/board/freescale/common/fsl_diu_fb.c @@ -205,7 +205,7 @@ int fsl_diu_init(int xres, unsigned int i, j; debug("Enter fsl_diu_init\n"); - dr.diu_reg = (struct diu *) (CFG_DIU_ADDR); + dr.diu_reg = (struct diu *) (CONFIG_SYS_DIU_ADDR); hw = (struct diu *) dr.diu_reg; disable_lcdc(); @@ -242,10 +242,10 @@ int fsl_diu_init(int xres, printf("Unable to allocate fb memory 1\n"); return -1; } - } else { - memset(info->screen_base, 0, info->smem_len); } + memset(info->screen_base, 0, info->smem_len); + dr.diu_reg->desc[0] = (unsigned int) &dummy_ad; dr.diu_reg->desc[1] = (unsigned int) &dummy_ad; dr.diu_reg->desc[2] = (unsigned int) &dummy_ad; @@ -403,7 +403,7 @@ static int map_video_memory(struct fb_info *info, unsigned long bytes_align) mask = bytes_align - 1; offset = (unsigned long)info->screen_base & mask; if (offset) { - info->screen_base += offset; + info->screen_base += (bytes_align - offset); info->smem_len = info->smem_len - (bytes_align - offset); } else info->smem_len = info->smem_len - bytes_align; diff --git a/board/freescale/common/pixis.c b/board/freescale/common/pixis.c index 64e2e08c5..96820ac60 100644 --- a/board/freescale/common/pixis.c +++ b/board/freescale/common/pixis.c @@ -26,6 +26,7 @@ #include <command.h> #include <watchdog.h> #include <asm/cache.h> +#include <asm/io.h> #include "pixis.h" @@ -206,8 +207,8 @@ void read_from_px_regs_altbank(int set) out8(PIXIS_BASE + PIXIS_VCFGEN1, tmp); } -#ifndef CFG_PIXIS_VBOOT_MASK -#define CFG_PIXIS_VBOOT_MASK (0x40) +#ifndef CONFIG_SYS_PIXIS_VBOOT_MASK +#define CONFIG_SYS_PIXIS_VBOOT_MASK (0x40) #endif void clear_altbank(void) @@ -215,7 +216,7 @@ void clear_altbank(void) u8 tmp; tmp = in8(PIXIS_BASE + PIXIS_VBOOT); - tmp &= ~CFG_PIXIS_VBOOT_MASK; + tmp &= ~CONFIG_SYS_PIXIS_VBOOT_MASK; out8(PIXIS_BASE + PIXIS_VBOOT, tmp); } @@ -226,7 +227,7 @@ void set_altbank(void) u8 tmp; tmp = in8(PIXIS_BASE + PIXIS_VBOOT); - tmp |= CFG_PIXIS_VBOOT_MASK; + tmp |= CONFIG_SYS_PIXIS_VBOOT_MASK; out8(PIXIS_BASE + PIXIS_VBOOT, tmp); } @@ -282,6 +283,76 @@ U_BOOT_CMD( "diswd - Disable watchdog timer \n", NULL); +#ifdef CONFIG_PIXIS_SGMII_CMD +int pixis_set_sgmii(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + int which_tsec = -1; + uchar mask; + uchar switch_mask; + + if (argc > 2) + if (strcmp(argv[1], "all") != 0) + which_tsec = simple_strtoul(argv[1], NULL, 0); + + switch (which_tsec) { +#ifdef CONFIG_TSEC1 + case 1: + mask = PIXIS_VSPEED2_TSEC1SER; + switch_mask = PIXIS_VCFGEN1_TSEC1SER; + break; +#endif +#ifdef CONFIG_TSEC2 + case 2: + mask = PIXIS_VSPEED2_TSEC2SER; + switch_mask = PIXIS_VCFGEN1_TSEC2SER; + break; +#endif +#ifdef CONFIG_TSEC3 + case 3: + mask = PIXIS_VSPEED2_TSEC3SER; + switch_mask = PIXIS_VCFGEN1_TSEC3SER; + break; +#endif +#ifdef CONFIG_TSEC4 + case 4: + mask = PIXIS_VSPEED2_TSEC4SER; + switch_mask = PIXIS_VCFGEN1_TSEC4SER; + break; +#endif + default: + mask = PIXIS_VSPEED2_MASK; + switch_mask = PIXIS_VCFGEN1_MASK; + break; + } + + /* Toggle whether the switches or FPGA control the settings */ + if (!strcmp(argv[argc - 1], "switch")) + clrbits_8((unsigned char *)PIXIS_BASE + PIXIS_VCFGEN1, + switch_mask); + else + setbits_8((unsigned char *)PIXIS_BASE + PIXIS_VCFGEN1, + switch_mask); + + /* If it's not the switches, enable or disable SGMII, as specified */ + if (!strcmp(argv[argc - 1], "on")) + clrbits_8((unsigned char *)PIXIS_BASE + PIXIS_VSPEED2, mask); + else if (!strcmp(argv[argc - 1], "off")) + setbits_8((unsigned char *)PIXIS_BASE + PIXIS_VSPEED2, mask); + + return 0; +} + +U_BOOT_CMD( + pixis_set_sgmii, CONFIG_SYS_MAXARGS, 1, pixis_set_sgmii, + "pixis_set_sgmii" + " - Enable or disable SGMII mode for a given TSEC \n", + "\npixis_set_sgmii [TSEC num] <on|off|switch>\n" + " TSEC num: 1,2,3,4 or 'all'. 'all' is default.\n" + " on - enables SGMII\n" + " off - disables SGMII\n" + " switch - use switch settings\n"); +#endif + /* * This function takes the non-integral cpu:mpx pll ratio * and converts it to an integer that can be used to assign @@ -398,7 +469,9 @@ pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) */ if ((p_cf && !(p_cf_sysclk && p_cf_corepll && p_cf_mpxpll)) || unknown_param) { +#ifdef CONFIG_SYS_LONGHELP puts(cmdtp->help); +#endif return 1; } @@ -428,7 +501,9 @@ pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) if (!(set_px_sysclk(sysclk) && set_px_corepll(corepll) && set_px_mpxpll(mpxpll))) { +#ifdef CONFIG_SYS_LONGHELP puts(cmdtp->help); +#endif return 1; } read_from_px_regs(1); @@ -463,7 +538,7 @@ pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( - pixis_reset, CFG_MAXARGS, 1, pixis_reset_cmd, + pixis_reset, CONFIG_SYS_MAXARGS, 1, pixis_reset_cmd, "pixis_reset - Reset the board using the FPGA sequencer\n", " pixis_reset\n" " pixis_reset [altbank]\n" diff --git a/board/freescale/common/sgmii_riser.c b/board/freescale/common/sgmii_riser.c new file mode 100644 index 000000000..5ccd6bcad --- /dev/null +++ b/board/freescale/common/sgmii_riser.c @@ -0,0 +1,26 @@ +/* + * Freescale SGMII Riser Card + * + * This driver supports the SGMII Riser card found on the + * "DS" style of development board from Freescale. + * + * This software may be used and distributed according to the + * terms of the GNU Public License, Version 2, incorporated + * herein by reference. + * + * Copyright 2008 Freescale Semiconductor, Inc. + * + */ + +#include <config.h> +#include <common.h> +#include <tsec.h> + +void fsl_sgmii_riser_init(struct tsec_info_struct *tsec_info, int num) +{ + int i; + + for (i = 0; i < num; i++) + if (tsec_info[i].flags & TSEC_SGMII) + tsec_info[i].phyaddr += SGMII_RISER_PHY_OFFSET; +} diff --git a/board/freescale/common/sgmii_riser.h b/board/freescale/common/sgmii_riser.h new file mode 100644 index 000000000..8d56a1f59 --- /dev/null +++ b/board/freescale/common/sgmii_riser.h @@ -0,0 +1,15 @@ +/* + * Freescale SGMII Riser Card + * + * This driver supports the SGMII Riser card found on the + * "DS" style of development board from Freescale. + * + * This software may be used and distributed according to the + * terms of the GNU Public License, Version 2, incorporated + * herein by reference. + * + * Copyright 2008 Freescale Semiconductor, Inc. + * + */ + +void fsl_sgmii_riser_init(struct tsec_info_struct *tsec_info, int num); diff --git a/board/freescale/common/sys_eeprom.c b/board/freescale/common/sys_eeprom.c index e53ead04f..eb58c7fd5 100644 --- a/board/freescale/common/sys_eeprom.c +++ b/board/freescale/common/sys_eeprom.c @@ -30,8 +30,8 @@ #include "../common/eeprom.h" -#if !defined(CFG_I2C_EEPROM_CCID) && !defined(CFG_I2C_EEPROM_NXID) -#error "Please define either CFG_I2C_EEPROM_CCID or CFG_I2C_EEPROM_NXID" +#if !defined(CONFIG_SYS_I2C_EEPROM_CCID) && !defined(CONFIG_SYS_I2C_EEPROM_NXID) +#error "Please define either CONFIG_SYS_I2C_EEPROM_CCID or CONFIG_SYS_I2C_EEPROM_NXID" #endif /** @@ -40,7 +40,7 @@ * See application note AN3638 for details. */ static struct __attribute__ ((__packed__)) eeprom { -#ifdef CFG_I2C_EEPROM_CCID +#ifdef CONFIG_SYS_I2C_EEPROM_CCID u8 id[4]; /* 0x00 - 0x03 EEPROM Tag 'CCID' */ u8 major; /* 0x04 Board revision, major */ u8 minor; /* 0x05 Board revision, minor */ @@ -53,7 +53,7 @@ static struct __attribute__ ((__packed__)) eeprom { u8 mac[8][6]; /* 0x42 - 0x71 MAC addresses */ u32 crc; /* 0x72 CRC32 checksum */ #endif -#ifdef CFG_I2C_EEPROM_NXID +#ifdef CONFIG_SYS_I2C_EEPROM_NXID u8 id[4]; /* 0x00 - 0x03 EEPROM Tag 'NXID' */ u8 sn[12]; /* 0x04 - 0x0F Serial Number */ u8 errata[5]; /* 0x10 - 0x14 Errata Level */ @@ -74,12 +74,12 @@ static struct __attribute__ ((__packed__)) eeprom { /* Set to 1 if we've read EEPROM into memory */ static int has_been_read = 0; -#ifdef CFG_I2C_EEPROM_NXID +#ifdef CONFIG_SYS_I2C_EEPROM_NXID /* Is this a valid NXID EEPROM? */ #define is_valid (*((u32 *)e.id) == (('N' << 24) | ('X' << 16) | ('I' << 8) | 'D')) #endif -#ifdef CFG_I2C_EEPROM_CCID +#ifdef CONFIG_SYS_I2C_EEPROM_CCID /* Is this a valid CCID EEPROM? */ #define is_valid (*((u32 *)e.id) == (('C' << 24) | ('C' << 16) | ('I' << 8) | 'D')) #endif @@ -93,7 +93,7 @@ static void show_eeprom(void) unsigned int crc; /* EEPROM tag ID, either CCID or NXID */ -#ifdef CFG_I2C_EEPROM_NXID +#ifdef CONFIG_SYS_I2C_EEPROM_NXID printf("ID: %c%c%c%c v%u\n", e.id[0], e.id[1], e.id[2], e.id[3], be32_to_cpu(e.version)); #else @@ -104,7 +104,7 @@ static void show_eeprom(void) printf("SN: %s\n", e.sn); /* Errata level. */ -#ifdef CFG_I2C_EEPROM_NXID +#ifdef CONFIG_SYS_I2C_EEPROM_NXID printf("Errata: %s\n", e.errata); #else printf("Errata: %c%c\n", @@ -152,22 +152,22 @@ static void show_eeprom(void) static int read_eeprom(void) { int ret; -#ifdef CFG_EEPROM_BUS_NUM +#ifdef CONFIG_SYS_EEPROM_BUS_NUM unsigned int bus; #endif if (has_been_read) return 0; -#ifdef CFG_EEPROM_BUS_NUM +#ifdef CONFIG_SYS_EEPROM_BUS_NUM bus = i2c_get_bus_num(); - i2c_set_bus_num(CFG_EEPROM_BUS_NUM); + i2c_set_bus_num(CONFIG_SYS_EEPROM_BUS_NUM); #endif - ret = i2c_read(CFG_I2C_EEPROM_ADDR, 0, CFG_I2C_EEPROM_ADDR_LEN, + ret = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (void *)&e, sizeof(e)); -#ifdef CFG_EEPROM_BUS_NUM +#ifdef CONFIG_SYS_EEPROM_BUS_NUM i2c_set_bus_num(bus); #endif @@ -188,12 +188,12 @@ static int prog_eeprom(void) int ret, i, length; unsigned int crc; void *p; -#ifdef CFG_EEPROM_BUS_NUM +#ifdef CONFIG_SYS_EEPROM_BUS_NUM unsigned int bus; #endif /* Set the reserved values to 0xFF */ -#ifdef CFG_I2C_EEPROM_NXID +#ifdef CONFIG_SYS_I2C_EEPROM_NXID e.res_0 = 0xFF; memset(e.res_1, 0xFF, sizeof(e.res_1)); #else @@ -204,20 +204,20 @@ static int prog_eeprom(void) crc = crc32(0, (void *)&e, length - 4); e.crc = cpu_to_be32(crc); -#ifdef CFG_EEPROM_BUS_NUM +#ifdef CONFIG_SYS_EEPROM_BUS_NUM bus = i2c_get_bus_num(); - i2c_set_bus_num(CFG_EEPROM_BUS_NUM); + i2c_set_bus_num(CONFIG_SYS_EEPROM_BUS_NUM); #endif for (i = 0, p = &e; i < length; i += 8, p += 8) { - ret = i2c_write(CFG_I2C_EEPROM_ADDR, i, CFG_I2C_EEPROM_ADDR_LEN, + ret = i2c_write(CONFIG_SYS_I2C_EEPROM_ADDR, i, CONFIG_SYS_I2C_EEPROM_ADDR_LEN, p, min((length - i), 8)); if (ret) break; udelay(5000); /* 5ms write cycle timing */ } -#ifdef CFG_EEPROM_BUS_NUM +#ifdef CONFIG_SYS_EEPROM_BUS_NUM i2c_set_bus_num(bus); #endif @@ -343,7 +343,7 @@ int do_mac(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) strncpy((char *)e.sn, argv[2], sizeof(e.sn) - 1); break; case 'e': /* errata */ -#ifdef CFG_I2C_EEPROM_NXID +#ifdef CONFIG_SYS_I2C_EEPROM_NXID memset(e.errata, 0, 5); strncpy((char *)e.errata, argv[2], 4); #else @@ -429,7 +429,7 @@ int mac_read_from_eeprom(void) return 0; } -#ifdef CFG_I2C_EEPROM_CCID +#ifdef CONFIG_SYS_I2C_EEPROM_CCID /** * get_cpu_board_revision - get the CPU board revision on 85xx boards @@ -439,11 +439,11 @@ int mac_read_from_eeprom(void) * This function is called before relocation, so we need to read a private * copy of the EEPROM into a local variable on the stack. * - * Also, we assume that CFG_EEPROM_BUS_NUM == CFG_SPD_BUS_NUM. The global - * variable i2c_bus_num must be compile-time initialized to CFG_SPD_BUS_NUM, + * Also, we assume that CONFIG_SYS_EEPROM_BUS_NUM == CONFIG_SYS_SPD_BUS_NUM. The global + * variable i2c_bus_num must be compile-time initialized to CONFIG_SYS_SPD_BUS_NUM, * so that the SPD code will work. This means that all pre-relocation I2C - * operations can only occur on the CFG_SPD_BUS_NUM bus. So if - * CFG_EEPROM_BUS_NUM != CFG_SPD_BUS_NUM, then we can't read the EEPROM when + * operations can only occur on the CONFIG_SYS_SPD_BUS_NUM bus. So if + * CONFIG_SYS_EEPROM_BUS_NUM != CONFIG_SYS_SPD_BUS_NUM, then we can't read the EEPROM when * this function is called. Oh well. */ unsigned int get_cpu_board_revision(void) @@ -454,7 +454,7 @@ unsigned int get_cpu_board_revision(void) u8 minor; /* 0x05 Board revision, minor */ } be; - i2c_read(CFG_I2C_EEPROM_ADDR, 0, CFG_I2C_EEPROM_ADDR_LEN, + i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (void *)&be, sizeof(be)); if (be.id != (('C' << 24) | ('C' << 16) | ('I' << 8) | 'D')) @@ -463,6 +463,6 @@ unsigned int get_cpu_board_revision(void) if ((be.major == 0xff) && (be.minor == 0xff)) return MPC85XX_CPU_BOARD_REV(0, 0); - return MPC85XX_CPU_BOARD_REV(e.major, e.minor); + return MPC85XX_CPU_BOARD_REV(be.major, be.minor); } #endif diff --git a/board/freescale/m52277evb/config.mk b/board/freescale/m52277evb/config.mk index ce014edca..b42fcc94c 100644 --- a/board/freescale/m52277evb/config.mk +++ b/board/freescale/m52277evb/config.mk @@ -22,4 +22,6 @@ # MA 02111-1307 USA # -TEXT_BASE = 0 +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp + +PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) diff --git a/board/freescale/m52277evb/m52277evb.c b/board/freescale/m52277evb/m52277evb.c index e5f47d2d9..9109edb37 100644 --- a/board/freescale/m52277evb/m52277evb.c +++ b/board/freescale/m52277evb/m52277evb.c @@ -38,10 +38,20 @@ int checkboard(void) phys_size_t initdram(int board_type) { + u32 dramsize; + +#ifdef CONFIG_CF_SBF + /* + * Serial Boot: The dram is already initialized in start.S + * only require to return DRAM size + */ + dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000; +#else volatile sdramc_t *sdram = (volatile sdramc_t *)(MMAP_SDRAM); - u32 dramsize, i; + volatile gpio_t *gpio = (volatile gpio_t *)(MMAP_GPIO); + u32 i; - dramsize = CFG_SDRAM_SIZE * 0x100000; + dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000; for (i = 0x13; i < 0x20; i++) { if (dramsize == (1 << i)) @@ -49,31 +59,39 @@ phys_size_t initdram(int board_type) } i--; - sdram->sdcs0 = (CFG_SDRAM_BASE | i); + gpio->mscr_sdram = CONFIG_SYS_SDRAM_DRV_STRENGTH; - sdram->sdcfg1 = CFG_SDRAM_CFG1; - sdram->sdcfg2 = CFG_SDRAM_CFG2; + sdram->sdcs0 = (CONFIG_SYS_SDRAM_BASE | i); + + sdram->sdcfg1 = CONFIG_SYS_SDRAM_CFG1; + sdram->sdcfg2 = CONFIG_SYS_SDRAM_CFG2; /* Issue PALL */ - sdram->sdcr = CFG_SDRAM_CTRL | 2; + sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 2; + __asm__("nop"); /* Issue LEMR */ - /*sdram->sdmr = CFG_SDRAM_EMOD; */ - sdram->sdmr = CFG_SDRAM_MODE; + sdram->sdmr = CONFIG_SYS_SDRAM_MODE; + __asm__("nop"); + sdram->sdmr = CONFIG_SYS_SDRAM_EMOD; + __asm__("nop"); udelay(1000); /* Issue PALL */ - sdram->sdcr = CFG_SDRAM_CTRL | 2; + sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 2; + __asm__("nop"); /* Perform two refresh cycles */ - sdram->sdcr = CFG_SDRAM_CTRL | 4; - sdram->sdcr = CFG_SDRAM_CTRL | 4; + sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 4; + __asm__("nop"); + sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 4; + __asm__("nop"); - sdram->sdcr = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000c00; + sdram->sdcr = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000C00; udelay(100); - +#endif return (dramsize); }; diff --git a/board/freescale/m52277evb/u-boot.lds b/board/freescale/m52277evb/u-boot.spa index 098e9d346..7ae70d455 100644 --- a/board/freescale/m52277evb/u-boot.lds +++ b/board/freescale/m52277evb/u-boot.spa @@ -63,7 +63,7 @@ SECTIONS common/main.o (.text) . = DEFINED(env_offset) ? env_offset : .; - common/environment.o (.text) + common/env_embedded.o (.text) *(.text) *(.fixup) diff --git a/board/freescale/m5235evb/u-boot.lds b/board/freescale/m52277evb/u-boot.stm index 33133a0fc..03ff53296 100644 --- a/board/freescale/m5235evb/u-boot.lds +++ b/board/freescale/m52277evb/u-boot.stm @@ -33,11 +33,11 @@ SECTIONS .dynsym : { *(.dynsym) } .dynstr : { *(.dynstr) } .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } + .rela.text : { *(.rela.text) } .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } .rel.got : { *(.rel.got) } .rela.got : { *(.rela.got) } .rel.ctors : { *(.rel.ctors) } @@ -55,15 +55,7 @@ SECTIONS /* WARNING - the following is hand-optimized to fit within */ /* the sector layout of our flash chips! XXX FIXME XXX */ - cpu/mcf523x/start.o (.text) - cpu/mcf523x/cpu_init.o (.text) - lib_m68k/traps.o (.text) - lib_m68k/interrupts.o (.text) - common/dlmalloc.o (.text) - lib_generic/zlib.o (.text) - - . = DEFINED(env_offset) ? env_offset : .; - common/environment.o (.text) + cpu/mcf5227x/start.o (.text) *(.text) *(.fixup) @@ -129,7 +121,7 @@ SECTIONS __init_end = .; __bss_start = .; - .bss (NOLOAD) : + .bss : { _sbss = .; *(.sbss) *(.scommon) diff --git a/board/freescale/m5235evb/Makefile b/board/freescale/m5235evb/Makefile index 74c252869..981763d20 100644 --- a/board/freescale/m5235evb/Makefile +++ b/board/freescale/m5235evb/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o mii.o +COBJS = $(BOARD).o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/freescale/m5235evb/m5235evb.c b/board/freescale/m5235evb/m5235evb.c index bd8a4e5e6..b9e61269c 100644 --- a/board/freescale/m5235evb/m5235evb.c +++ b/board/freescale/m5235evb/m5235evb.c @@ -57,7 +57,7 @@ phys_size_t initdram(int board_type) GPIO_PAR_SDRAM_SDWE | GPIO_PAR_SDRAM_SCAS | GPIO_PAR_SDRAM_SRAS | GPIO_PAR_SDRAM_SCKE | GPIO_PAR_SDRAM_SDCS(3); - dramsize = CFG_SDRAM_SIZE * 0x100000; + dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000; for (i = 0x13; i < 0x20; i++) { if (dramsize == (1 << i)) break; @@ -65,7 +65,7 @@ phys_size_t initdram(int board_type) i--; if (!(sdram->dacr0 & SDRAMC_DARCn_RE)) { - dramclk = gd->bus_clk / (CFG_HZ * CFG_HZ); + dramclk = gd->bus_clk / (CONFIG_SYS_HZ * CONFIG_SYS_HZ); /* Initialize DRAM Control Register: DCR */ sdram->dcr = SDRAMC_DCR_RTIM_9CLKS | @@ -73,7 +73,7 @@ phys_size_t initdram(int board_type) /* Initialize DACR0 */ sdram->dacr0 = - SDRAMC_DARCn_BA(CFG_SDRAM_BASE) | SDRAMC_DARCn_CASL_C1 | + SDRAMC_DARCn_BA(CONFIG_SYS_SDRAM_BASE) | SDRAMC_DARCn_CASL_C1 | SDRAMC_DARCn_CBM_CMD20 | SDRAMC_DARCn_PS_32; asm("nop"); @@ -90,7 +90,7 @@ phys_size_t initdram(int board_type) } /* Write to this block to initiate precharge */ - *(u32 *) (CFG_SDRAM_BASE) = 0xA5A59696; + *(u32 *) (CONFIG_SYS_SDRAM_BASE) = 0xA5A59696; /* Set RE (bit 15) in DACR */ sdram->dacr0 |= SDRAMC_DARCn_RE; @@ -105,7 +105,7 @@ phys_size_t initdram(int board_type) asm("nop"); /* Write to the SDRAM Mode Register */ - *(u32 *) (CFG_SDRAM_BASE + 0x400) = 0xA5A59696; + *(u32 *) (CONFIG_SYS_SDRAM_BASE + 0x400) = 0xA5A59696; } return dramsize; diff --git a/board/freescale/m5235evb/mii.c b/board/freescale/m5235evb/mii.c deleted file mode 100644 index 1fd4d99c1..000000000 --- a/board/freescale/m5235evb/mii.c +++ /dev/null @@ -1,307 +0,0 @@ -/* - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/fec.h> -#include <asm/immap.h> - -#include <config.h> -#include <net.h> - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) -#undef MII_DEBUG -#undef ET_DEBUG - -int fecpin_setclear(struct eth_device *dev, int setclear) -{ - volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; - - if (setclear) { - gpio->par_feci2c |= - (GPIO_PAR_FECI2C_EMDC_FECEMDC | GPIO_PAR_FECI2C_EMDIO_FECEMDIO); - } else { - gpio->par_feci2c &= - ~(GPIO_PAR_FECI2C_EMDC_MASK | GPIO_PAR_FECI2C_EMDIO_MASK); - } - - return 0; -} - -#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_MII) -#include <miiphy.h> - -/* Make MII read/write commands for the FEC. */ -#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) - -#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) - -/* PHY identification */ -#define PHY_ID_LXT970 0x78100000 /* LXT970 */ -#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ -#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ -#define PHY_ID_QS6612 0x01814400 /* QS6612 */ -#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ -#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ -#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ -#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ -#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ -#define PHY_ID_KS8721BL 0x00221619 /* Micrel KS8721BL/SL */ - -#define STR_ID_LXT970 "LXT970" -#define STR_ID_LXT971 "LXT971" -#define STR_ID_82555 "Intel82555" -#define STR_ID_QS6612 "QS6612" -#define STR_ID_AMD79C784 "AMD79C784" -#define STR_ID_LSI80225 "LSI80225" -#define STR_ID_LSI80225B "LSI80225/B" -#define STR_ID_DP83848VV "N83848" -#define STR_ID_DP83849 "N83849" -#define STR_ID_KS8721BL "KS8721BL" - -/**************************************************************************** - * mii_init -- Initialize the MII for MII command without ethernet - * This function is a subset of eth_init - **************************************************************************** - */ -void mii_reset(struct fec_info_s *info) -{ - volatile fec_t *fecp = (fec_t *) (info->miibase); - int i; - - fecp->ecr = FEC_ECR_RESET; - for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { - udelay(1); - } - if (i == FEC_RESET_DELAY) { - printf("FEC_RESET_DELAY timeout\n"); - } -} - -/* send command to phy using mii, wait for result */ -uint mii_send(uint mii_cmd) -{ - struct fec_info_s *info; - struct eth_device *dev; - volatile fec_t *ep; - uint mii_reply; - int j = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - ep = (fec_t *) info->miibase; - - ep->mmfr = mii_cmd; /* command to phy */ - - /* wait for mii complete */ - while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { - udelay(1); - j++; - } - if (j >= MCFFEC_TOUT_LOOP) { - printf("MII not complete\n"); - return -1; - } - - mii_reply = ep->mmfr; /* result from phy */ - ep->eir = FEC_EIR_MII; /* clear MII complete */ -#ifdef ET_DEBUG - printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", - __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); -#endif - - return (mii_reply & 0xffff); /* data read from phy */ -} -#endif /* CFG_DISCOVER_PHY || (CONFIG_MII) */ - -#if defined(CFG_DISCOVER_PHY) -int mii_discover_phy(struct eth_device *dev) -{ -#define MAX_PHY_PASSES 11 - struct fec_info_s *info = dev->priv; - int phyaddr, pass; - uint phyno, phytype; - - if (info->phyname_init) - return info->phy_addr; - - phyaddr = -1; /* didn't find a PHY yet */ - for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { - if (pass > 1) { - /* PHY may need more time to recover from reset. - * The LXT970 needs 50ms typical, no maximum is - * specified, so wait 10ms before try again. - * With 11 passes this gives it 100ms to wake up. - */ - udelay(10000); /* wait 10ms */ - } - - for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { - - phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); -#ifdef ET_DEBUG - printf("PHY type 0x%x pass %d type\n", phytype, pass); -#endif - if (phytype != 0xffff) { - phyaddr = phyno; - phytype <<= 16; - phytype |= - mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); - - switch (phytype & 0xffffffff) { - case PHY_ID_KS8721BL: - strcpy(info->phy_name, - STR_ID_KS8721BL); - info->phyname_init = 1; - break; - default: - strcpy(info->phy_name, "unknown"); - info->phyname_init = 1; - break; - } - -#ifdef ET_DEBUG - printf("PHY @ 0x%x pass %d type ", phyno, pass); - switch (phytype & 0xffffffff) { - case PHY_ID_KS8721BL: - printf(STR_ID_KS8721BL); - break; - default: - printf("0x%08x\n", phytype); - break; - } -#endif - } - } - } - if (phyaddr < 0) - printf("No PHY device found.\n"); - - return phyaddr; -} -#endif /* CFG_DISCOVER_PHY */ - -void mii_init(void) __attribute__((weak,alias("__mii_init"))); - -void __mii_init(void) -{ - volatile fec_t *fecp; - struct fec_info_s *info; - struct eth_device *dev; - int miispd = 0, i = 0; - u16 autoneg = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - fecp = (fec_t *) info->miibase; - - fecpin_setclear(dev, 1); - - mii_reset(info); - - /* We use strictly polling mode only */ - fecp->eimr = 0; - - /* Clear any pending interrupt */ - fecp->eir = 0xffffffff; - - /* Set MII speed */ - miispd = (gd->bus_clk / 1000000) / 5; - fecp->mscr = miispd << 1; - - info->phy_addr = mii_discover_phy(dev); - -#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) - while (i < MCFFEC_TOUT_LOOP) { - autoneg = 0; - miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); - i++; - - if ((autoneg & AUTONEGLINK) == AUTONEGLINK) - break; - - udelay(500); - } - if (i >= MCFFEC_TOUT_LOOP) { - printf("Auto Negotiation not complete\n"); - } - - /* adapt to the half/full speed settings */ - info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; - info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); -} - -/***************************************************************************** - * Read and write a MII PHY register, routines used by MII Utilities - * - * FIXME: These routines are expected to return 0 on success, but mii_send - * does _not_ return an error code. Maybe 0xFFFF means error, i.e. - * no PHY connected... - * For now always return 0. - * FIXME: These routines only work after calling eth_init() at least once! - * Otherwise they hang in mii_send() !!! Sorry! - *****************************************************************************/ - -int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, - unsigned short *value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); -#endif - rdreg = mii_send(mk_mii_read(addr, reg)); - - *value = rdreg; - -#ifdef MII_DEBUG - printf("0x%04x\n", *value); -#endif - - return 0; -} - -int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, - unsigned short value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); -#endif - - rdreg = mii_send(mk_mii_write(addr, reg, value)); - -#ifdef MII_DEBUG - printf("0x%04x\n", value); -#endif - - return 0; -} - -#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/freescale/m5235evb/u-boot.16 b/board/freescale/m5235evb/u-boot.16 index 4ca026fc5..c13488437 100644 --- a/board/freescale/m5235evb/u-boot.16 +++ b/board/freescale/m5235evb/u-boot.16 @@ -63,7 +63,7 @@ SECTIONS lib_generic/zlib.o (.text) . = DEFINED(env_offset) ? env_offset : .; - common/environment.o (.text) + common/env_embedded.o (.text) *(.text) *(.fixup) diff --git a/board/freescale/m5235evb/u-boot.32 b/board/freescale/m5235evb/u-boot.32 index eeffdfb4e..53c337df8 100644 --- a/board/freescale/m5235evb/u-boot.32 +++ b/board/freescale/m5235evb/u-boot.32 @@ -71,7 +71,7 @@ SECTIONS lib_generic/libgeneric.a (.text) . = DEFINED(env_offset) ? env_offset : .; - common/environment.o (.text) + common/env_embedded.o (.text) *(.text) *(.fixup) diff --git a/board/freescale/m5249evb/m5249evb.c b/board/freescale/m5249evb/m5249evb.c index c9ed341bb..b1ccbebde 100644 --- a/board/freescale/m5249evb/m5249evb.c +++ b/board/freescale/m5249evb/m5249evb.c @@ -42,7 +42,7 @@ int checkboard (void) { /* * Set LED on */ - val = mbar2_readLong(MCFSIM_GPIO1_OUT) & ~CFG_GPIO1_LED; + val = mbar2_readLong(MCFSIM_GPIO1_OUT) & ~CONFIG_SYS_GPIO1_LED; mbar2_writeLong(MCFSIM_GPIO1_OUT, val); /* Set LED on */ return 0; @@ -57,13 +57,13 @@ phys_size_t initdram (int board_type) { * RC = ([(RefreshTime/#rows) / (1/BusClk)] / 16) - 1 */ -#ifdef CFG_FAST_CLK +#ifdef CONFIG_SYS_FAST_CLK /* * Busclk=70MHz, RefreshTime=64ms, #rows=4096 (4K) * SO=1, NAM=0, COC=0, RTIM=01 (6clk refresh), RC=39 */ mbar_writeShort(MCFSIM_DCR, 0x8239); -#elif CFG_PLL_BYPASS +#elif CONFIG_SYS_PLL_BYPASS /* * Busclk=5.6448MHz, RefreshTime=64ms, #rows=8192 (8K) * SO=1, NAM=0, COC=0, RTIM=01 (6clk refresh), RC=02 @@ -101,7 +101,7 @@ phys_size_t initdram (int board_type) { mbar_writeLong(MCFSIM_DACR0, 0x0000b364); /* Enable DACR0[IMRS] (bit 6); RE remains enabled */ *((volatile unsigned long *) 0x800) = junk; /* Access RAM to initialize the mode register */ - return CFG_SDRAM_SIZE * 1024 * 1024; + return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; }; diff --git a/board/freescale/m5249evb/u-boot.lds b/board/freescale/m5249evb/u-boot.lds index afdb7202c..aec7e9bf4 100644 --- a/board/freescale/m5249evb/u-boot.lds +++ b/board/freescale/m5249evb/u-boot.lds @@ -62,7 +62,7 @@ SECTIONS lib_generic/zlib.o (.text) . = DEFINED(env_offset) ? env_offset : .; - common/environment.o (.text) + common/env_embedded.o (.text) *(.text) *(.fixup) diff --git a/board/freescale/m5253demo/flash.c b/board/freescale/m5253demo/flash.c index 1bf1e9759..08f767d10 100644 --- a/board/freescale/m5253demo/flash.c +++ b/board/freescale/m5253demo/flash.c @@ -28,7 +28,7 @@ #include <asm/immap.h> -#ifndef CFG_FLASH_CFI +#ifndef CONFIG_SYS_FLASH_CFI typedef unsigned short FLASH_PORT_WIDTH; typedef volatile unsigned short FLASH_PORT_WIDTHV; @@ -49,14 +49,14 @@ int flash_get_offsets(ulong base, flash_info_t * info); int write_word(flash_info_t * info, FPWV * dest, u16 data); void inline spin_wheel(void); -flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; +flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; ulong flash_init(void) { ulong size = 0; ulong fbase = 0; - fbase = (ulong) CFG_FLASH_BASE; + fbase = (ulong) CONFIG_SYS_FLASH_BASE; flash_get_size((FPWV *) fbase, &flash_info[0]); flash_get_offsets((ulong) fbase, &flash_info[0]); fbase += flash_info[0].size; @@ -64,8 +64,8 @@ ulong flash_init(void) /* Protect monitor and environment sectors */ flash_protect(FLAG_PROTECT_SET, - CFG_MONITOR_BASE, - CFG_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]); + CONFIG_SYS_MONITOR_BASE, + CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]); return size; } @@ -77,8 +77,8 @@ int flash_get_offsets(ulong base, flash_info_t * info) if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) { info->start[0] = base; - for (k = 0, j = 0; j < CFG_SST_SECT; j++, k++) { - info->start[k + 1] = info->start[k] + CFG_SST_SECTSZ; + for (k = 0, j = 0; j < CONFIG_SYS_SST_SECT; j++, k++) { + info->start[k + 1] = info->start[k] + CONFIG_SYS_SST_SECTSZ; info->protect[k] = 0; } } @@ -174,16 +174,16 @@ ulong flash_get_size(FPWV * addr, flash_info_t * info) info->sector_count = 0; info->size = 0; - info->sector_count = CFG_SST_SECT; - info->size = CFG_SST_SECT * CFG_SST_SECTSZ; + info->sector_count = CONFIG_SYS_SST_SECT; + info->size = CONFIG_SYS_SST_SECT * CONFIG_SYS_SST_SECTSZ; /* reset ID mode */ *addr = (FPWV) 0x00F000F0; - if (info->sector_count > CFG_MAX_FLASH_SECT) { + if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) { printf("** ERROR: sector count %d > max (%d) **\n", - info->sector_count, CFG_MAX_FLASH_SECT); - info->sector_count = CFG_MAX_FLASH_SECT; + info->sector_count, CONFIG_SYS_MAX_FLASH_SECT); + info->sector_count = CONFIG_SYS_MAX_FLASH_SECT; } return (info->size); @@ -235,7 +235,7 @@ int flash_erase(flash_info_t * info, int s_first, int s_last) start = get_timer(0); last = start; - if ((s_last - s_first) == (CFG_SST_SECT - 1)) { + if ((s_last - s_first) == (CONFIG_SYS_SST_SECT - 1)) { if (prot == 0) { addr = (FPWV *) info->start[0]; @@ -255,7 +255,7 @@ int flash_erase(flash_info_t * info, int s_first, int s_last) count = 0; } - if (get_timer(start) > CFG_FLASH_ERASE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf("Timeout\n"); *addr = 0x00F0; /* reset to read mode */ @@ -271,7 +271,7 @@ int flash_erase(flash_info_t * info, int s_first, int s_last) enable_interrupts(); return 0; - } else if (prot == CFG_SST_SECT) { + } else if (prot == CONFIG_SYS_SST_SECT) { return 1; } } @@ -294,7 +294,7 @@ int flash_erase(flash_info_t * info, int s_first, int s_last) flag = disable_interrupts(); - base = (FPWV *) (CFG_FLASH_BASE); /* First sector */ + base = (FPWV *) (CONFIG_SYS_FLASH_BASE); /* First sector */ base[FLASH_CYCLE1] = 0x00AA; /* unlock */ base[FLASH_CYCLE2] = 0x0055; /* unlock */ @@ -308,7 +308,7 @@ int flash_erase(flash_info_t * info, int s_first, int s_last) while ((*addr & 0x0080) != 0x0080) { if (get_timer(start) > - CFG_FLASH_ERASE_TOUT) { + CONFIG_SYS_FLASH_ERASE_TOUT) { printf("Timeout\n"); *addr = 0x00F0; /* reset to read mode */ @@ -424,7 +424,7 @@ int write_word(flash_info_t * info, FPWV * dest, u16 data) return (2); } - base = (FPWV *) (CFG_FLASH_BASE); + base = (FPWV *) (CONFIG_SYS_FLASH_BASE); /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts(); @@ -444,7 +444,7 @@ int write_word(flash_info_t * info, FPWV * dest, u16 data) /* data polling for D7 */ while (res == 0 && (*dest & (u8) 0x00800080) != (data & (u8) 0x00800080)) { - if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { *dest = (u8) 0x00F000F0; /* reset bank */ res = 1; } diff --git a/board/freescale/m5253demo/m5253demo.c b/board/freescale/m5253demo/m5253demo.c index 2eb6a0444..b39cd4d7a 100644 --- a/board/freescale/m5253demo/m5253demo.c +++ b/board/freescale/m5253demo/m5253demo.c @@ -45,7 +45,7 @@ phys_size_t initdram(int board_type) if (!(mbar_readLong(MCFSIM_DCR) & 0x8000)) { u32 RC, temp; - RC = (CFG_CLK / 1000000) >> 1; + RC = (CONFIG_SYS_CLK / 1000000) >> 1; RC = (RC * 15) >> 4; /* Initialize DRAM Control Register: DCR */ @@ -56,7 +56,7 @@ phys_size_t initdram(int board_type) __asm__("nop"); /* Initialize DMR0 */ - dramsize = (CFG_SDRAM_SIZE << 20); + dramsize = (CONFIG_SYS_SDRAM_SIZE << 20); temp = (dramsize - 1) & 0xFFFC0000; mbar_writeLong(MCFSIM_DMR0, temp | 1); __asm__("nop"); @@ -65,7 +65,7 @@ phys_size_t initdram(int board_type) __asm__("nop"); /* Write to this block to initiate precharge */ - *(u32 *) (CFG_SDRAM_BASE) = 0xa5a5a5a5; + *(u32 *) (CONFIG_SYS_SDRAM_BASE) = 0xa5a5a5a5; __asm__("nop"); /* Set RE bit in DACR */ @@ -81,7 +81,7 @@ phys_size_t initdram(int board_type) mbar_readLong(MCFSIM_DACR0) | 0x0040); __asm__("nop"); - *(u32 *) (CFG_SDRAM_BASE + 0x800) = 0xa5a5a5a5; + *(u32 *) (CONFIG_SYS_SDRAM_BASE + 0x800) = 0xa5a5a5a5; } return dramsize; @@ -104,7 +104,7 @@ int ide_preinit(void) void ide_set_reset(int idereset) { - volatile atac_t *ata = (atac_t *) CFG_ATA_BASE_ADDR; + volatile atac_t *ata = (atac_t *) CONFIG_SYS_ATA_BASE_ADDR; long period; /* t1, t2, t3, t4, t5, t6, t9, tRD, tA */ int piotms[5][9] = { {70, 165, 60, 30, 50, 5, 20, 0, 35}, /* PIO 0 */ @@ -121,7 +121,7 @@ void ide_set_reset(int idereset) mbar2_writeLong(CIM_MISCCR, CIM_MISCCR_CPUEND); #define CALC_TIMING(t) (t + period - 1) / period - period = 1000000000 / (CFG_CLK / 2); /* period in ns */ + period = 1000000000 / (CONFIG_SYS_CLK / 2); /* period in ns */ /*ata->ton = CALC_TIMING (180); */ ata->t1 = CALC_TIMING(piotms[2][0]); diff --git a/board/freescale/m5253demo/u-boot.lds b/board/freescale/m5253demo/u-boot.lds index 4bdea5ed5..a29576457 100644 --- a/board/freescale/m5253demo/u-boot.lds +++ b/board/freescale/m5253demo/u-boot.lds @@ -62,7 +62,7 @@ SECTIONS lib_generic/zlib.o (.text) . = DEFINED(env_offset) ? env_offset : .; - common/environment.o (.text) + common/env_embedded.o (.text) *(.text) diff --git a/board/freescale/m5253evbe/m5253evbe.c b/board/freescale/m5253evbe/m5253evbe.c index f3b1efdb2..ae69f67b4 100644 --- a/board/freescale/m5253evbe/m5253evbe.c +++ b/board/freescale/m5253evbe/m5253evbe.c @@ -43,7 +43,7 @@ phys_size_t initdram(int board_type) if (!(mbar_readLong(MCFSIM_DCR) & 0x8000)) { u32 RC, dramsize; - RC = (CFG_CLK / 1000000) >> 1; + RC = (CONFIG_SYS_CLK / 1000000) >> 1; RC = (RC * 15) >> 4; /* Initialize DRAM Control Register: DCR */ @@ -54,7 +54,7 @@ phys_size_t initdram(int board_type) asm("nop"); /* Initialize DMR0 */ - dramsize = ((CFG_SDRAM_SIZE << 20) - 1) & 0xFFFC0000; + dramsize = ((CONFIG_SYS_SDRAM_SIZE << 20) - 1) & 0xFFFC0000; mbar_writeLong(MCFSIM_DMR0, dramsize | 1); asm("nop"); @@ -62,7 +62,7 @@ phys_size_t initdram(int board_type) asm("nop"); /* Write to this block to initiate precharge */ - *(u32 *) (CFG_SDRAM_BASE) = 0xa5a5a5a5; + *(u32 *) (CONFIG_SYS_SDRAM_BASE) = 0xa5a5a5a5; asm("nop"); /* Set RE bit in DACR */ @@ -78,10 +78,10 @@ phys_size_t initdram(int board_type) mbar_readLong(MCFSIM_DACR0) | 0x0040); asm("nop"); - *(u32 *) (CFG_SDRAM_BASE + 0x800) = 0xa5a5a5a5; + *(u32 *) (CONFIG_SYS_SDRAM_BASE + 0x800) = 0xa5a5a5a5; } - return CFG_SDRAM_SIZE * 1024 * 1024; + return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; } int testdram(void) @@ -101,7 +101,7 @@ int ide_preinit(void) void ide_set_reset(int idereset) { - volatile atac_t *ata = (atac_t *) CFG_ATA_BASE_ADDR; + volatile atac_t *ata = (atac_t *) CONFIG_SYS_ATA_BASE_ADDR; long period; /* t1, t2, t3, t4, t5, t6, t9, tRD, tA */ int piotms[5][9] = { {70, 165, 60, 30, 50, 5, 20, 0, 35}, /* PIO 0 */ @@ -118,7 +118,7 @@ void ide_set_reset(int idereset) mbar2_writeLong(CIM_MISCCR, CIM_MISCCR_CPUEND); #define CALC_TIMING(t) (t + period - 1) / period - period = 1000000000 / (CFG_CLK / 2); /* period in ns */ + period = 1000000000 / (CONFIG_SYS_CLK / 2); /* period in ns */ /*ata->ton = CALC_TIMING (180); */ ata->t1 = CALC_TIMING(piotms[2][0]); diff --git a/board/freescale/m5253evbe/u-boot.lds b/board/freescale/m5253evbe/u-boot.lds index 6d225f528..239cf95e5 100644 --- a/board/freescale/m5253evbe/u-boot.lds +++ b/board/freescale/m5253evbe/u-boot.lds @@ -62,7 +62,7 @@ SECTIONS lib_generic/zlib.o (.text) . = DEFINED(env_offset) ? env_offset : .; - common/environment.o (.text) + common/env_embedded.o (.text) *(.text) *(.fixup) diff --git a/board/freescale/m5271evb/Makefile b/board/freescale/m5271evb/Makefile index 2ec71ee1d..424ab1cf9 100644 --- a/board/freescale/m5271evb/Makefile +++ b/board/freescale/m5271evb/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o mii.o +COBJS = $(BOARD).o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/freescale/m5271evb/m5271evb.c b/board/freescale/m5271evb/m5271evb.c index e089d5f02..5505cc42c 100644 --- a/board/freescale/m5271evb/m5271evb.c +++ b/board/freescale/m5271evb/m5271evb.c @@ -66,7 +66,7 @@ phys_size_t initdram (int board_type) { * PS: 32bit port size */ mbar_writeLong(MCF_SDRAMC_DACR0, - MCF_SDRAMC_DACRn_BA(CFG_SDRAM_BASE>>18) + MCF_SDRAMC_DACRn_BA(CONFIG_SYS_SDRAM_BASE>>18) | MCF_SDRAMC_DACRn_CASL(1) | MCF_SDRAMC_DACRn_CBM(3) | MCF_SDRAMC_DACRn_PS(0)); @@ -85,7 +85,7 @@ phys_size_t initdram (int board_type) { asm(" nop"); /* Write to this block to initiate precharge */ - *(u32 *)(CFG_SDRAM_BASE) = 0xa5a5a5a5; + *(u32 *)(CONFIG_SYS_SDRAM_BASE) = 0xa5a5a5a5; /* Set RE bit in DACR */ mbar_writeLong(MCF_SDRAMC_DACR0, mbar_readLong(MCF_SDRAMC_DACR0) @@ -108,10 +108,10 @@ phys_size_t initdram (int board_type) { * Burst Type = Sequential * Burst Length = 1 */ - *(u32 *)(CFG_SDRAM_BASE + 0x400) = 0xa5a5a5a5; + *(u32 *)(CONFIG_SYS_SDRAM_BASE + 0x400) = 0xa5a5a5a5; } - return CFG_SDRAM_SIZE * 1024 * 1024; + return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; }; int testdram (void) { diff --git a/board/freescale/m5271evb/mii.c b/board/freescale/m5271evb/mii.c deleted file mode 100644 index 78a7028bc..000000000 --- a/board/freescale/m5271evb/mii.c +++ /dev/null @@ -1,303 +0,0 @@ -/* - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/fec.h> -#include <asm/immap.h> - -#include <config.h> -#include <net.h> - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) -#undef MII_DEBUG -#undef ET_DEBUG - -int fecpin_setclear(struct eth_device *dev, int setclear) -{ - if (setclear) { - /* Enable Ethernet pins */ - mbar_writeByte(MCF_GPIO_PAR_FECI2C, CFG_FECI2C); - } else { - } - - return 0; -} - -#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII) -#include <miiphy.h> - -/* Make MII read/write commands for the FEC. */ -#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) - -#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) - -/* PHY identification */ -#define PHY_ID_LXT970 0x78100000 /* LXT970 */ -#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ -#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ -#define PHY_ID_QS6612 0x01814400 /* QS6612 */ -#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ -#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ -#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ -#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ -#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ -#define PHY_ID_KS8721BL 0x00221619 /* Micrel KS8721BL/SL */ - -#define STR_ID_LXT970 "LXT970" -#define STR_ID_LXT971 "LXT971" -#define STR_ID_82555 "Intel82555" -#define STR_ID_QS6612 "QS6612" -#define STR_ID_AMD79C784 "AMD79C784" -#define STR_ID_LSI80225 "LSI80225" -#define STR_ID_LSI80225B "LSI80225/B" -#define STR_ID_DP83848VV "N83848" -#define STR_ID_DP83849 "N83849" -#define STR_ID_KS8721BL "KS8721BL" - -/**************************************************************************** - * mii_init -- Initialize the MII for MII command without ethernet - * This function is a subset of eth_init - **************************************************************************** - */ -void mii_reset(struct fec_info_s *info) -{ - volatile fec_t *fecp = (fec_t *) (info->miibase); - int i; - - fecp->ecr = FEC_ECR_RESET; - for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { - udelay(1); - } - if (i == FEC_RESET_DELAY) { - printf("FEC_RESET_DELAY timeout\n"); - } -} - -/* send command to phy using mii, wait for result */ -uint mii_send(uint mii_cmd) -{ - struct fec_info_s *info; - struct eth_device *dev; - volatile fec_t *ep; - uint mii_reply; - int j = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - ep = (fec_t *) info->miibase; - - ep->mmfr = mii_cmd; /* command to phy */ - - /* wait for mii complete */ - while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { - udelay(1); - j++; - } - if (j >= MCFFEC_TOUT_LOOP) { - printf("MII not complete\n"); - return -1; - } - - mii_reply = ep->mmfr; /* result from phy */ - ep->eir = FEC_EIR_MII; /* clear MII complete */ -#ifdef ET_DEBUG - printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", - __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); -#endif - - return (mii_reply & 0xffff); /* data read from phy */ -} -#endif /* CFG_DISCOVER_PHY || CONFIG_CMD_MII */ - -#if defined(CFG_DISCOVER_PHY) -int mii_discover_phy(struct eth_device *dev) -{ -#define MAX_PHY_PASSES 11 - struct fec_info_s *info = dev->priv; - int phyaddr, pass; - uint phyno, phytype; - - if (info->phyname_init) - return info->phy_addr; - - phyaddr = -1; /* didn't find a PHY yet */ - for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { - if (pass > 1) { - /* PHY may need more time to recover from reset. - * The LXT970 needs 50ms typical, no maximum is - * specified, so wait 10ms before try again. - * With 11 passes this gives it 100ms to wake up. - */ - udelay(10000); /* wait 10ms */ - } - - for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { - - phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); -#ifdef ET_DEBUG - printf("PHY type 0x%x pass %d type\n", phytype, pass); -#endif - if (phytype != 0xffff) { - phyaddr = phyno; - phytype <<= 16; - phytype |= - mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); - - switch (phytype & 0xffffffff) { - case PHY_ID_KS8721BL: - strcpy(info->phy_name, - STR_ID_KS8721BL); - info->phyname_init = 1; - break; - default: - strcpy(info->phy_name, "unknown"); - info->phyname_init = 1; - break; - } - -#ifdef ET_DEBUG - printf("PHY @ 0x%x pass %d type ", phyno, pass); - switch (phytype & 0xffffffff) { - case PHY_ID_KS8721BL: - printf(STR_ID_KS8721BL); - break; - default: - printf("0x%08x\n", phytype); - break; - } -#endif - } - } - } - if (phyaddr < 0) - printf("No PHY device found.\n"); - - return phyaddr; -} -#endif /* CFG_DISCOVER_PHY */ - -void mii_init(void) __attribute__((weak,alias("__mii_init"))); - -void __mii_init(void) -{ - volatile fec_t *fecp; - struct fec_info_s *info; - struct eth_device *dev; - int miispd = 0, i = 0; - u16 autoneg = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - fecp = (fec_t *) info->miibase; - - fecpin_setclear(dev, 1); - - mii_reset(info); - - /* We use strictly polling mode only */ - fecp->eimr = 0; - - /* Clear any pending interrupt */ - fecp->eir = 0xffffffff; - - /* Set MII speed */ - miispd = (gd->bus_clk / 1000000) / 5; - fecp->mscr = miispd << 1; - - info->phy_addr = mii_discover_phy(dev); - -#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) - while (i < MCFFEC_TOUT_LOOP) { - autoneg = 0; - miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); - i++; - - if ((autoneg & AUTONEGLINK) == AUTONEGLINK) - break; - - udelay(500); - } - if (i >= MCFFEC_TOUT_LOOP) { - printf("Auto Negotiation not complete\n"); - } - - /* adapt to the half/full speed settings */ - info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; - info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); -} - -/***************************************************************************** - * Read and write a MII PHY register, routines used by MII Utilities - * - * FIXME: These routines are expected to return 0 on success, but mii_send - * does _not_ return an error code. Maybe 0xFFFF means error, i.e. - * no PHY connected... - * For now always return 0. - * FIXME: These routines only work after calling eth_init() at least once! - * Otherwise they hang in mii_send() !!! Sorry! - *****************************************************************************/ - -int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, - unsigned short *value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); -#endif - rdreg = mii_send(mk_mii_read(addr, reg)); - - *value = rdreg; - -#ifdef MII_DEBUG - printf("0x%04x\n", *value); -#endif - - return 0; -} - -int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, - unsigned short value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); -#endif - - rdreg = mii_send(mk_mii_write(addr, reg, value)); - -#ifdef MII_DEBUG - printf("0x%04x\n", value); -#endif - - return 0; -} - -#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/freescale/m5271evb/u-boot.lds b/board/freescale/m5271evb/u-boot.lds index c07d02383..0bc7fa1ab 100644 --- a/board/freescale/m5271evb/u-boot.lds +++ b/board/freescale/m5271evb/u-boot.lds @@ -63,7 +63,7 @@ SECTIONS lib_generic/zlib.o (.text) . = DEFINED(env_offset) ? env_offset : .; - common/environment.o (.ppcenv) + common/env_embedded.o (.ppcenv) *(.text) *(.fixup) diff --git a/board/freescale/m5272c3/Makefile b/board/freescale/m5272c3/Makefile index be704b76f..424ab1cf9 100644 --- a/board/freescale/m5272c3/Makefile +++ b/board/freescale/m5272c3/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o mii.o +COBJS = $(BOARD).o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/freescale/m5272c3/flash.c b/board/freescale/m5272c3/flash.c deleted file mode 100644 index ea0b1fd7e..000000000 --- a/board/freescale/m5272c3/flash.c +++ /dev/null @@ -1,378 +0,0 @@ -/* - * (C) Copyright 2000-2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> - -#define PHYS_FLASH_1 CFG_FLASH_BASE -#define FLASH_BANK_SIZE 0x200000 - -flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; - -void flash_print_info (flash_info_t * info) -{ - int i; - - switch (info->flash_id & FLASH_VENDMASK) { - case (AMD_MANUFACT & FLASH_VENDMASK): - printf ("AMD: "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case (AMD_ID_PL160CB & FLASH_TYPEMASK): - printf ("AM29PL160CB (16Mbit)\n"); - break; - default: - printf ("Unknown Chip Type\n"); - goto Done; - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; i++) { - if ((i % 5) == 0) { - printf ("\n "); - } - printf (" %08lX%s", info->start[i], - info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); - - Done: - return; -} - - -unsigned long flash_init (void) -{ - int i, j; - ulong size = 0; - - for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { - ulong flashbase = 0; - - flash_info[i].flash_id = - (AMD_MANUFACT & FLASH_VENDMASK) | - (AMD_ID_PL160CB & FLASH_TYPEMASK); - flash_info[i].size = FLASH_BANK_SIZE; - flash_info[i].sector_count = CFG_MAX_FLASH_SECT; - memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT); - if (i == 0) - flashbase = PHYS_FLASH_1; - else - panic ("configured to many flash banks!\n"); - - for (j = 0; j < flash_info[i].sector_count; j++) { - if (j == 0) { - /* 1st is 16 KiB */ - flash_info[i].start[j] = flashbase; - } - if ((j >= 1) && (j <= 2)) { - /* 2nd and 3rd are 8 KiB */ - flash_info[i].start[j] = - flashbase + 0x4000 + 0x2000 * (j - 1); - } - if (j == 3) { - /* 4th is 224 KiB */ - flash_info[i].start[j] = flashbase + 0x8000; - } - if ((j >= 4) && (j <= 10)) { - /* rest is 256 KiB */ - flash_info[i].start[j] = - flashbase + 0x40000 + 0x40000 * (j - - 4); - } - } - size += flash_info[i].size; - } - - flash_protect (FLAG_PROTECT_SET, - CFG_FLASH_BASE, - CFG_FLASH_BASE + 0x3ffff, &flash_info[0]); - - return size; -} - - -#define CMD_READ_ARRAY 0x00F0 -#define CMD_UNLOCK1 0x00AA -#define CMD_UNLOCK2 0x0055 -#define CMD_ERASE_SETUP 0x0080 -#define CMD_ERASE_CONFIRM 0x0030 -#define CMD_PROGRAM 0x00A0 -#define CMD_UNLOCK_BYPASS 0x0020 - -#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CFG_FLASH_BASE + (0x00000555<<1))) -#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CFG_FLASH_BASE + (0x000002AA<<1))) - -#define BIT_ERASE_DONE 0x0080 -#define BIT_RDY_MASK 0x0080 -#define BIT_PROGRAM_ERROR 0x0020 -#define BIT_TIMEOUT 0x80000000 /* our flag */ - -#define READY 1 -#define ERR 2 -#define TMO 4 - - -int flash_erase (flash_info_t * info, int s_first, int s_last) -{ - ulong result; - int iflag, cflag, prot, sect; - int rc = ERR_OK; - int chip1; - - /* first look for protection bits */ - - if (info->flash_id == FLASH_UNKNOWN) - return ERR_UNKNOWN_FLASH_TYPE; - - if ((s_first < 0) || (s_first > s_last)) { - return ERR_INVAL; - } - - if ((info->flash_id & FLASH_VENDMASK) != - (AMD_MANUFACT & FLASH_VENDMASK)) { - return ERR_UNKNOWN_FLASH_VENDOR; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - if (prot) - return ERR_PROTECTED; - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - - cflag = icache_status (); - icache_disable (); - iflag = disable_interrupts (); - - printf ("\n"); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { - printf ("Erasing sector %2d ... ", sect); - - /* arm simple, non interrupt dependent timer */ - set_timer (0); - - if (info->protect[sect] == 0) { /* not protected */ - volatile u16 *addr = - (volatile u16 *) (info->start[sect]); - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - MEM_FLASH_ADDR1 = CMD_ERASE_SETUP; - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - *addr = CMD_ERASE_CONFIRM; - - /* wait until flash is ready */ - chip1 = 0; - - do { - result = *addr; - - /* check timeout */ - if (get_timer (0) > CFG_FLASH_ERASE_TOUT) { - MEM_FLASH_ADDR1 = CMD_READ_ARRAY; - chip1 = TMO; - break; - } - - if (!chip1 - && (result & 0xFFFF) & BIT_ERASE_DONE) - chip1 = READY; - - } while (!chip1); - - MEM_FLASH_ADDR1 = CMD_READ_ARRAY; - - if (chip1 == ERR) { - rc = ERR_PROG_ERROR; - goto outahere; - } - if (chip1 == TMO) { - rc = ERR_TIMOUT; - goto outahere; - } - - printf ("ok.\n"); - } else { /* it was protected */ - - printf ("protected!\n"); - } - } - - if (ctrlc ()) - printf ("User Interrupt!\n"); - - outahere: - /* allow flash to settle - wait 10 ms */ - udelay (10000); - - if (iflag) - enable_interrupts (); - - if (cflag) - icache_enable (); - - return rc; -} - -static int write_word (flash_info_t * info, ulong dest, ulong data) -{ - volatile u16 *addr = (volatile u16 *) dest; - ulong result; - int rc = ERR_OK; - int cflag, iflag; - int chip1; - - /* - * Check if Flash is (sufficiently) erased - */ - result = *addr; - if ((result & data) != data) - return ERR_NOT_ERASED; - - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - - cflag = icache_status (); - icache_disable (); - iflag = disable_interrupts (); - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - MEM_FLASH_ADDR1 = CMD_PROGRAM; - *addr = data; - - /* arm simple, non interrupt dependent timer */ - set_timer (0); - - /* wait until flash is ready */ - chip1 = 0; - do { - result = *addr; - - /* check timeout */ - if (get_timer (0) > CFG_FLASH_ERASE_TOUT) { - chip1 = ERR | TMO; - break; - } - if (!chip1 && ((result & 0x80) == (data & 0x80))) - chip1 = READY; - - } while (!chip1); - - *addr = CMD_READ_ARRAY; - - if (chip1 == ERR || *addr != data) - rc = ERR_PROG_ERROR; - - if (iflag) - enable_interrupts (); - - if (cflag) - icache_enable (); - - return rc; -} - - -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong wp, data; - int rc; - - if (addr & 1) { - printf ("unaligned destination not supported\n"); - return ERR_ALIGN; - } - -#if 0 - if (cnt & 1) { - printf ("odd transfer sizes not supported\n"); - return ERR_ALIGN; - } -#endif - - wp = addr; - - if (addr & 1) { - data = (*((volatile u8 *) addr) << 8) | *((volatile u8 *) - src); - if ((rc = write_word (info, wp - 1, data)) != 0) { - return (rc); - } - src += 1; - wp += 1; - cnt -= 1; - } - - while (cnt >= 2) { - data = *((volatile u16 *) src); - if ((rc = write_word (info, wp, data)) != 0) { - return (rc); - } - src += 2; - wp += 2; - cnt -= 2; - } - - if (cnt == 1) { - data = (*((volatile u8 *) src) << 8) | - *((volatile u8 *) (wp + 1)); - if ((rc = write_word (info, wp, data)) != 0) { - return (rc); - } - src += 1; - wp += 1; - cnt -= 1; - } - - return ERR_OK; -} diff --git a/board/freescale/m5272c3/m5272c3.c b/board/freescale/m5272c3/m5272c3.c index d17cb2ef9..902ca3aac 100644 --- a/board/freescale/m5272c3/m5272c3.c +++ b/board/freescale/m5272c3/m5272c3.c @@ -40,7 +40,7 @@ phys_size_t initdram (int board_type) { /* Dummy write to start SDRAM */ *((volatile unsigned long *)0) = 0; - return CFG_SDRAM_SIZE * 1024 * 1024; + return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; }; int testdram (void) { diff --git a/board/freescale/m5272c3/mii.c b/board/freescale/m5272c3/mii.c deleted file mode 100644 index b30ba803f..000000000 --- a/board/freescale/m5272c3/mii.c +++ /dev/null @@ -1,303 +0,0 @@ -/* - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/fec.h> -#include <asm/immap.h> - -#include <config.h> -#include <net.h> - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) -#undef MII_DEBUG -#undef ET_DEBUG - -int fecpin_setclear(struct eth_device *dev, int setclear) -{ - volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; - - if (setclear) { - gpio->gpio_pbcnt |= GPIO_PBCNT_E_MDC | GPIO_PBCNT_E_RXER | GPIO_PBCNT_E_RXD1 | GPIO_PBCNT_E_RXD2 | GPIO_PBCNT_E_RXD3 | GPIO_PBCNT_E_TXD1 | GPIO_PBCNT_E_TXD2 | GPIO_PBCNT_E_TXD3; - } else { - } - return 0; -} - -#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII) -#include <miiphy.h> - -/* Make MII read/write commands for the FEC. */ -#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) - -#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) - -/* PHY identification */ -#define PHY_ID_LXT970 0x78100000 /* LXT970 */ -#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ -#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ -#define PHY_ID_QS6612 0x01814400 /* QS6612 */ -#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ -#define PHY_ID_AMD79C874VC 0x0022561B /* AMD 79C874 */ -#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ -#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ -#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ -#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ - -#define STR_ID_LXT970 "LXT970" -#define STR_ID_LXT971 "LXT971" -#define STR_ID_82555 "Intel82555" -#define STR_ID_QS6612 "QS6612" -#define STR_ID_AMD79C784 "AMD79C784" -#define STR_ID_AMD79C874VC "AMD79C874VC" -#define STR_ID_LSI80225 "LSI80225" -#define STR_ID_LSI80225B "LSI80225/B" -#define STR_ID_DP83848VV "N83848" -#define STR_ID_DP83849 "N83849" - -/**************************************************************************** - * mii_init -- Initialize the MII for MII command without ethernet - * This function is a subset of eth_init - **************************************************************************** - */ -void mii_reset(struct fec_info_s *info) -{ - volatile fec_t *fecp = (fec_t *) (info->miibase); - int i; - - fecp->ecr = FEC_ECR_RESET; - for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { - udelay(1); - } - if (i == FEC_RESET_DELAY) { - printf("FEC_RESET_DELAY timeout\n"); - } -} - -/* send command to phy using mii, wait for result */ -uint mii_send(uint mii_cmd) -{ - struct fec_info_s *info; - struct eth_device *dev; - volatile fec_t *ep; - uint mii_reply; - int j = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - ep = (fec_t *) info->miibase; - - ep->mmfr = mii_cmd; /* command to phy */ - - /* wait for mii complete */ - while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { - udelay(1); - j++; - } - if (j >= MCFFEC_TOUT_LOOP) { - printf("MII not complete\n"); - return -1; - } - - mii_reply = ep->mmfr; /* result from phy */ - ep->eir = FEC_EIR_MII; /* clear MII complete */ -#ifdef ET_DEBUG - printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", - __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); -#endif - - return (mii_reply & 0xffff); /* data read from phy */ -} -#endif /* CFG_DISCOVER_PHY || CONFIG_CMD_MII */ - -#if defined(CFG_DISCOVER_PHY) -int mii_discover_phy(struct eth_device *dev) -{ -#define MAX_PHY_PASSES 11 - struct fec_info_s *info = dev->priv; - int phyaddr, pass; - uint phyno, phytype; - - if (info->phyname_init) - return info->phy_addr; - - phyaddr = -1; /* didn't find a PHY yet */ - for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { - if (pass > 1) { - /* PHY may need more time to recover from reset. - * The LXT970 needs 50ms typical, no maximum is - * specified, so wait 10ms before try again. - * With 11 passes this gives it 100ms to wake up. - */ - udelay(10000); /* wait 10ms */ - } - - for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { - - phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); -#ifdef ET_DEBUG - printf("PHY type 0x%x pass %d type\n", phytype, pass); -#endif - if (phytype != 0xffff) { - phyaddr = phyno; - phytype <<= 16; - phytype |= - mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); - - switch (phytype & 0xffffffff) { - case PHY_ID_AMD79C874VC: - strcpy(info->phy_name, - STR_ID_AMD79C874VC); - info->phyname_init = 1; - break; - default: - strcpy(info->phy_name, "unknown"); - info->phyname_init = 1; - break; - } - -#ifdef ET_DEBUG - printf("PHY @ 0x%x pass %d type ", phyno, pass); - switch (phytype & 0xffffffff) { - case PHY_ID_AMD79C874VC: - printf(STR_ID_AMD79C874VC); - break; - default: - printf("0x%08x\n", phytype); - break; - } -#endif - } - } - } - if (phyaddr < 0) - printf("No PHY device found.\n"); - - return phyaddr; -} -#endif /* CFG_DISCOVER_PHY */ - -void mii_init(void) __attribute__((weak,alias("__mii_init"))); - -void __mii_init(void) -{ - volatile fec_t *fecp; - struct fec_info_s *info; - struct eth_device *dev; - int miispd = 0, i = 0; - u16 autoneg = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - fecp = (fec_t *) info->miibase; - - fecpin_setclear(dev, 1); - - mii_reset(info); - - /* We use strictly polling mode only */ - fecp->eimr = 0; - - /* Clear any pending interrupt */ - fecp->eir = 0xffffffff; - - /* Set MII speed */ - miispd = (gd->bus_clk / 1000000) / 5; - fecp->mscr = miispd << 1; - - info->phy_addr = mii_discover_phy(dev); - -#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) - while (i < MCFFEC_TOUT_LOOP) { - autoneg = 0; - miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); - i++; - - if ((autoneg & AUTONEGLINK) == AUTONEGLINK) - break; - - udelay(500); - } - if (i >= MCFFEC_TOUT_LOOP) { - printf("Auto Negotiation not complete\n"); - } - - /* adapt to the half/full speed settings */ - info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; - info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); -} - -/***************************************************************************** - * Read and write a MII PHY register, routines used by MII Utilities - * - * FIXME: These routines are expected to return 0 on success, but mii_send - * does _not_ return an error code. Maybe 0xFFFF means error, i.e. - * no PHY connected... - * For now always return 0. - * FIXME: These routines only work after calling eth_init() at least once! - * Otherwise they hang in mii_send() !!! Sorry! - *****************************************************************************/ - -int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, - unsigned short *value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); -#endif - rdreg = mii_send(mk_mii_read(addr, reg)); - - *value = rdreg; - -#ifdef MII_DEBUG - printf("0x%04x\n", *value); -#endif - - return 0; -} - -int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, - unsigned short value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); -#endif - - rdreg = mii_send(mk_mii_write(addr, reg, value)); - -#ifdef MII_DEBUG - printf("0x%04x\n", value); -#endif - - return 0; -} - -#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/freescale/m5272c3/u-boot.lds b/board/freescale/m5272c3/u-boot.lds index 8420c91a7..e5c7b67c6 100644 --- a/board/freescale/m5272c3/u-boot.lds +++ b/board/freescale/m5272c3/u-boot.lds @@ -62,7 +62,7 @@ SECTIONS lib_generic/zlib.o (.text) . = DEFINED(env_offset) ? env_offset : .; - common/environment.o (.text) + common/env_embedded.o (.text) *(.text) *(.fixup) diff --git a/board/freescale/m5275evb/Makefile b/board/freescale/m5275evb/Makefile index 74c252869..981763d20 100644 --- a/board/freescale/m5275evb/Makefile +++ b/board/freescale/m5275evb/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o mii.o +COBJS = $(BOARD).o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/freescale/m5275evb/m5275evb.c b/board/freescale/m5275evb/m5275evb.c index be19e0275..35c9b2018 100644 --- a/board/freescale/m5275evb/m5275evb.c +++ b/board/freescale/m5275evb/m5275evb.c @@ -44,7 +44,7 @@ phys_size_t initdram(int board_type) gpio_reg->par_sdram = 0x3FF; /* Enable SDRAM */ /* Set up chip select */ - sdp->sdbar0 = CFG_SDRAM_BASE; + sdp->sdbar0 = CONFIG_SYS_SDRAM_BASE; sdp->sdbmr0 = MCF_SDRAMC_SDMRn_BAM_32M | MCF_SDRAMC_SDMRn_V; /* Set up timing */ @@ -58,34 +58,34 @@ phys_size_t initdram(int board_type) sdp->sdcr |= MCF_SDRAMC_SDCR_IPALL; /* Dummy write to start SDRAM */ - *((volatile unsigned long *)CFG_SDRAM_BASE) = 0xa5a59696; + *((volatile unsigned long *)CONFIG_SYS_SDRAM_BASE) = 0xa5a59696; /* Send LEMR */ sdp->sdmr = MCF_SDRAMC_SDMR_BNKAD_LEMR | MCF_SDRAMC_SDMR_AD(0x0) | MCF_SDRAMC_SDMR_CMD; - *((volatile unsigned long *)CFG_SDRAM_BASE) = 0xa5a59696; + *((volatile unsigned long *)CONFIG_SYS_SDRAM_BASE) = 0xa5a59696; /* Send LMR */ sdp->sdmr = 0x058d0000; - *((volatile unsigned long *)CFG_SDRAM_BASE) = 0xa5a59696; + *((volatile unsigned long *)CONFIG_SYS_SDRAM_BASE) = 0xa5a59696; /* Stop sending commands */ sdp->sdmr &= ~(MCF_SDRAMC_SDMR_CMD); /* Set precharge */ sdp->sdcr |= MCF_SDRAMC_SDCR_IPALL; - *((volatile unsigned long *)CFG_SDRAM_BASE) = 0xa5a59696; + *((volatile unsigned long *)CONFIG_SYS_SDRAM_BASE) = 0xa5a59696; /* Stop manual precharge, send 2 IREF */ sdp->sdcr &= ~(MCF_SDRAMC_SDCR_IPALL); sdp->sdcr |= MCF_SDRAMC_SDCR_IREF; - *((volatile unsigned long *)CFG_SDRAM_BASE) = 0xa5a59696; - *((volatile unsigned long *)CFG_SDRAM_BASE) = 0xa5a59696; + *((volatile unsigned long *)CONFIG_SYS_SDRAM_BASE) = 0xa5a59696; + *((volatile unsigned long *)CONFIG_SYS_SDRAM_BASE) = 0xa5a59696; /* Write mode register, clear reset DLL */ sdp->sdmr = 0x018d0000; - *((volatile unsigned long *)CFG_SDRAM_BASE) = 0xa5a59696; + *((volatile unsigned long *)CONFIG_SYS_SDRAM_BASE) = 0xa5a59696; /* Stop sending commands */ sdp->sdmr &= ~(MCF_SDRAMC_SDMR_CMD); @@ -100,7 +100,7 @@ phys_size_t initdram(int board_type) | MCF_SDRAMC_SDCR_RCNT((SDRAM_TREFI/(PERIOD*64)) - 1 + 1) | MCF_SDRAMC_SDCR_DQS_OE(0x3); - return CFG_SDRAM_SIZE * 1024 * 1024; + return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; }; int testdram(void) diff --git a/board/freescale/m5275evb/mii.c b/board/freescale/m5275evb/mii.c deleted file mode 100644 index 6c7ace956..000000000 --- a/board/freescale/m5275evb/mii.c +++ /dev/null @@ -1,319 +0,0 @@ -/* - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/fec.h> -#include <asm/immap.h> - -#include <config.h> -#include <net.h> - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) -#undef MII_DEBUG -#undef ET_DEBUG - -int fecpin_setclear(struct eth_device *dev, int setclear) -{ - struct fec_info_s *info = (struct fec_info_s *) dev->priv; - volatile gpio_t *gpio = (gpio_t *)MMAP_GPIO; - - if (setclear) { - /* Enable Ethernet pins */ - if (info->iobase == CFG_FEC0_IOBASE) { - gpio->par_feci2c |= 0x0F00; - gpio->par_fec0hl |= 0xC0; - } else { - gpio->par_feci2c |= 0x00A0; - gpio->par_fec1hl |= 0xC0; - } - } else { - if (info->iobase == CFG_FEC0_IOBASE) { - gpio->par_feci2c &= ~0x0F00; - gpio->par_fec0hl &= ~0xC0; - } else { - gpio->par_feci2c &= ~0x00A0; - gpio->par_fec1hl &= ~0xC0; - } - } - - return 0; -} - -#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII) -#include <miiphy.h> - -/* Make MII read/write commands for the FEC. */ -#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) - -#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) - -/* PHY identification */ -#define PHY_ID_LXT970 0x78100000 /* LXT970 */ -#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ -#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ -#define PHY_ID_QS6612 0x01814400 /* QS6612 */ -#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ -#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ -#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ -#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ -#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ -#define PHY_ID_KS8721BL 0x00221619 /* Micrel KS8721BL/SL */ - -#define STR_ID_LXT970 "LXT970" -#define STR_ID_LXT971 "LXT971" -#define STR_ID_82555 "Intel82555" -#define STR_ID_QS6612 "QS6612" -#define STR_ID_AMD79C784 "AMD79C784" -#define STR_ID_LSI80225 "LSI80225" -#define STR_ID_LSI80225B "LSI80225/B" -#define STR_ID_DP83848VV "N83848" -#define STR_ID_DP83849 "N83849" -#define STR_ID_KS8721BL "KS8721BL" - -/**************************************************************************** - * mii_init -- Initialize the MII for MII command without ethernet - * This function is a subset of eth_init - **************************************************************************** - */ -void mii_reset(struct fec_info_s *info) -{ - volatile fec_t *fecp = (fec_t *) (info->miibase); - int i; - - fecp->ecr = FEC_ECR_RESET; - for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { - udelay(1); - } - if (i == FEC_RESET_DELAY) { - printf("FEC_RESET_DELAY timeout\n"); - } -} - -/* send command to phy using mii, wait for result */ -uint mii_send(uint mii_cmd) -{ - struct fec_info_s *info; - struct eth_device *dev; - volatile fec_t *ep; - uint mii_reply; - int j = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - ep = (fec_t *) info->miibase; - - ep->mmfr = mii_cmd; /* command to phy */ - - /* wait for mii complete */ - while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { - udelay(1); - j++; - } - if (j >= MCFFEC_TOUT_LOOP) { - printf("MII not complete\n"); - return -1; - } - - mii_reply = ep->mmfr; /* result from phy */ - ep->eir = FEC_EIR_MII; /* clear MII complete */ -#ifdef ET_DEBUG - printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", - __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); -#endif - - return (mii_reply & 0xffff); /* data read from phy */ -} -#endif /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CONFIG_CMD_MII) */ - -#if defined(CFG_DISCOVER_PHY) -int mii_discover_phy(struct eth_device *dev) -{ -#define MAX_PHY_PASSES 11 - struct fec_info_s *info = dev->priv; - int phyaddr, pass; - uint phyno, phytype; - - if (info->phyname_init) - return info->phy_addr; - - phyaddr = -1; /* didn't find a PHY yet */ - for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { - if (pass > 1) { - /* PHY may need more time to recover from reset. - * The LXT970 needs 50ms typical, no maximum is - * specified, so wait 10ms before try again. - * With 11 passes this gives it 100ms to wake up. - */ - udelay(10000); /* wait 10ms */ - } - - for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { - - phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); -#ifdef ET_DEBUG - printf("PHY type 0x%x pass %d type\n", phytype, pass); -#endif - if (phytype != 0xffff) { - phyaddr = phyno; - phytype <<= 16; - phytype |= - mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); - - switch (phytype & 0xffffffff) { - case PHY_ID_KS8721BL: - strcpy(info->phy_name, - STR_ID_KS8721BL); - info->phyname_init = 1; - break; - default: - strcpy(info->phy_name, "unknown"); - info->phyname_init = 1; - break; - } - -#ifdef ET_DEBUG - printf("PHY @ 0x%x pass %d type ", phyno, pass); - switch (phytype & 0xffffffff) { - case PHY_ID_KS8721BL: - printf(STR_ID_KS8721BL); - break; - default: - printf("0x%08x\n", phytype); - break; - } -#endif - } - } - } - if (phyaddr < 0) - printf("No PHY device found.\n"); - - return phyaddr; -} -#endif /* CFG_DISCOVER_PHY */ - -void mii_init(void) __attribute__((weak,alias("__mii_init"))); - -void __mii_init(void) -{ - volatile fec_t *fecp; - struct fec_info_s *info; - struct eth_device *dev; - int miispd = 0, i = 0; - u16 autoneg = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - fecp = (fec_t *) info->miibase; - - fecpin_setclear(dev, 1); - - mii_reset(info); - - /* We use strictly polling mode only */ - fecp->eimr = 0; - - /* Clear any pending interrupt */ - fecp->eir = 0xffffffff; - - /* Set MII speed */ - miispd = (gd->bus_clk / 1000000) / 5; - fecp->mscr = miispd << 1; - - info->phy_addr = mii_discover_phy(dev); - -#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) - while (i < MCFFEC_TOUT_LOOP) { - autoneg = 0; - miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); - i++; - - if ((autoneg & AUTONEGLINK) == AUTONEGLINK) - break; - - udelay(500); - } - if (i >= MCFFEC_TOUT_LOOP) { - printf("Auto Negotiation not complete\n"); - } - - /* adapt to the half/full speed settings */ - info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; - info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); -} - -/***************************************************************************** - * Read and write a MII PHY register, routines used by MII Utilities - * - * FIXME: These routines are expected to return 0 on success, but mii_send - * does _not_ return an error code. Maybe 0xFFFF means error, i.e. - * no PHY connected... - * For now always return 0. - * FIXME: These routines only work after calling eth_init() at least once! - * Otherwise they hang in mii_send() !!! Sorry! - *****************************************************************************/ - -int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, - unsigned short *value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); -#endif - rdreg = mii_send(mk_mii_read(addr, reg)); - - *value = rdreg; - -#ifdef MII_DEBUG - printf("0x%04x\n", *value); -#endif - - return 0; -} - -int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, - unsigned short value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); -#endif - - rdreg = mii_send(mk_mii_write(addr, reg, value)); - -#ifdef MII_DEBUG - printf("0x%04x\n", value); -#endif - - return 0; -} - -#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/freescale/m5275evb/u-boot.lds b/board/freescale/m5275evb/u-boot.lds index d810ebc14..a3e03d556 100644 --- a/board/freescale/m5275evb/u-boot.lds +++ b/board/freescale/m5275evb/u-boot.lds @@ -61,7 +61,7 @@ SECTIONS lib_generic/zlib.o (.text) . = DEFINED(env_offset) ? env_offset : .; - common/environment.o(.text) + common/env_embedded.o(.text) *(.text) *(.fixup) diff --git a/board/freescale/m5282evb/Makefile b/board/freescale/m5282evb/Makefile index 2ec71ee1d..424ab1cf9 100644 --- a/board/freescale/m5282evb/Makefile +++ b/board/freescale/m5282evb/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o mii.o +COBJS = $(BOARD).o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/freescale/m5282evb/m5282evb.c b/board/freescale/m5282evb/m5282evb.c index 31d69231a..b0c9fc83f 100644 --- a/board/freescale/m5282evb/m5282evb.c +++ b/board/freescale/m5282evb/m5282evb.c @@ -36,7 +36,7 @@ phys_size_t initdram (int board_type) { u32 dramsize, i, dramclk; - dramsize = CFG_SDRAM_SIZE * 0x100000; + dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000; for (i = 0x13; i < 0x20; i++) { if (dramsize == (1 << i)) break; @@ -45,7 +45,7 @@ phys_size_t initdram (int board_type) if (!(MCFSDRAMC_DACR0 & MCFSDRAMC_DACR_RE)) { - dramclk = gd->bus_clk / (CFG_HZ * CFG_HZ); + dramclk = gd->bus_clk / (CONFIG_SYS_HZ * CONFIG_SYS_HZ); /* Initialize DRAM Control Register: DCR */ MCFSDRAMC_DCR = (0 @@ -55,7 +55,7 @@ phys_size_t initdram (int board_type) /* Initialize DACR0 */ MCFSDRAMC_DACR0 = (0 - | MCFSDRAMC_DACR_BASE(CFG_SDRAM_BASE) + | MCFSDRAMC_DACR_BASE(CONFIG_SYS_SDRAM_BASE) | MCFSDRAMC_DACR_CASL(1) | MCFSDRAMC_DACR_CBM(3) | MCFSDRAMC_DACR_PS_32); @@ -77,7 +77,7 @@ phys_size_t initdram (int board_type) } /* Write to this block to initiate precharge */ - *(u32 *)(CFG_SDRAM_BASE) = 0xA5A59696; + *(u32 *)(CONFIG_SYS_SDRAM_BASE) = 0xA5A59696; asm("nop"); /* Set RE (bit 15) in DACR */ @@ -94,7 +94,7 @@ phys_size_t initdram (int board_type) asm("nop"); /* Write to the SDRAM Mode Register */ - *(u32 *)(CFG_SDRAM_BASE + 0x400) = 0xA5A59696; + *(u32 *)(CONFIG_SYS_SDRAM_BASE + 0x400) = 0xA5A59696; } return dramsize; } diff --git a/board/freescale/m5282evb/mii.c b/board/freescale/m5282evb/mii.c deleted file mode 100644 index 8ae2ec69c..000000000 --- a/board/freescale/m5282evb/mii.c +++ /dev/null @@ -1,304 +0,0 @@ -/* - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/fec.h> -#include <asm/immap.h> - -#include <config.h> -#include <net.h> - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) -#undef MII_DEBUG -#undef ET_DEBUG - -int fecpin_setclear(struct eth_device *dev, int setclear) -{ - if (setclear) { - MCFGPIO_PASPAR |= 0x0F00; - MCFGPIO_PEHLPAR = CFG_PEHLPAR; - } else { - MCFGPIO_PASPAR &= 0xF0FF; - MCFGPIO_PEHLPAR &= ~CFG_PEHLPAR; - } - return 0; -} - -#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII) -#include <miiphy.h> - -/* Make MII read/write commands for the FEC. */ -#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) - -#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) - -/* PHY identification */ -#define PHY_ID_LXT970 0x78100000 /* LXT970 */ -#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ -#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ -#define PHY_ID_QS6612 0x01814400 /* QS6612 */ -#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ -#define PHY_ID_AMD79C874VC 0x0022561B /* AMD 79C874 */ -#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ -#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ -#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ -#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ - -#define STR_ID_LXT970 "LXT970" -#define STR_ID_LXT971 "LXT971" -#define STR_ID_82555 "Intel82555" -#define STR_ID_QS6612 "QS6612" -#define STR_ID_AMD79C784 "AMD79C784" -#define STR_ID_AMD79C874VC "AMD79C874VC" -#define STR_ID_LSI80225 "LSI80225" -#define STR_ID_LSI80225B "LSI80225/B" -#define STR_ID_DP83848VV "N83848" -#define STR_ID_DP83849 "N83849" - -/**************************************************************************** - * mii_init -- Initialize the MII for MII command without ethernet - * This function is a subset of eth_init - **************************************************************************** - */ -void mii_reset(struct fec_info_s *info) -{ - volatile fec_t *fecp = (fec_t *) (info->miibase); - int i; - - fecp->ecr = FEC_ECR_RESET; - for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { - udelay(1); - } - if (i == FEC_RESET_DELAY) { - printf("FEC_RESET_DELAY timeout\n"); - } -} - -/* send command to phy using mii, wait for result */ -uint mii_send(uint mii_cmd) -{ - struct fec_info_s *info; - struct eth_device *dev; - volatile fec_t *ep; - uint mii_reply; - int j = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - ep = (fec_t *) info->miibase; - - ep->mmfr = mii_cmd; /* command to phy */ - - /* wait for mii complete */ - while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { - udelay(1); - j++; - } - if (j >= MCFFEC_TOUT_LOOP) { - printf("MII not complete\n"); - return -1; - } - - mii_reply = ep->mmfr; /* result from phy */ - ep->eir = FEC_EIR_MII; /* clear MII complete */ -#ifdef ET_DEBUG - printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", - __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); -#endif - - return (mii_reply & 0xffff); /* data read from phy */ -} -#endif /* CFG_DISCOVER_PHY || CONFIG_CMD_MII */ - -#if defined(CFG_DISCOVER_PHY) -int mii_discover_phy(struct eth_device *dev) -{ -#define MAX_PHY_PASSES 11 - struct fec_info_s *info = dev->priv; - int phyaddr, pass; - uint phyno, phytype; - - if (info->phyname_init) - return info->phy_addr; - - phyaddr = -1; /* didn't find a PHY yet */ - for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { - if (pass > 1) { - /* PHY may need more time to recover from reset. - * The LXT970 needs 50ms typical, no maximum is - * specified, so wait 10ms before try again. - * With 11 passes this gives it 100ms to wake up. - */ - udelay(10000); /* wait 10ms */ - } - - for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { - - phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); -#ifdef ET_DEBUG - printf("PHY type 0x%x pass %d type\n", phytype, pass); -#endif - if (phytype != 0xffff) { - phyaddr = phyno; - phytype <<= 16; - phytype |= - mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); - - switch (phytype & 0xffffffff) { - case PHY_ID_AMD79C874VC: - strcpy(info->phy_name, - STR_ID_AMD79C874VC); - info->phyname_init = 1; - break; - default: - strcpy(info->phy_name, "unknown"); - info->phyname_init = 1; - break; - } - -#ifdef ET_DEBUG - printf("PHY @ 0x%x pass %d type ", phyno, pass); - switch (phytype & 0xffffffff) { - case PHY_ID_AMD79C874VC: - printf(STR_ID_AMD79C874VC); - break; - default: - printf("0x%08x\n", phytype); - break; - } -#endif - } - } - } - if (phyaddr < 0) - printf("No PHY device found.\n"); - - return phyaddr; -} -#endif /* CFG_DISCOVER_PHY */ - -void mii_init(void) __attribute__((weak,alias("__mii_init"))); - -void __mii_init(void) -{ - volatile fec_t *fecp; - struct fec_info_s *info; - struct eth_device *dev; - int miispd = 0, i = 0; - u16 autoneg = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - fecp = (fec_t *) info->miibase; - - fecpin_setclear(dev, 1); - - mii_reset(info); - - /* We use strictly polling mode only */ - fecp->eimr = 0; - - /* Clear any pending interrupt */ - fecp->eir = 0xffffffff; - - /* Set MII speed */ - miispd = (gd->bus_clk / 1000000) / 5; - fecp->mscr = miispd << 1; - - info->phy_addr = mii_discover_phy(dev); - -#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) - while (i < MCFFEC_TOUT_LOOP) { - autoneg = 0; - miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); - i++; - - if ((autoneg & AUTONEGLINK) == AUTONEGLINK) - break; - - udelay(500); - } - if (i >= MCFFEC_TOUT_LOOP) { - printf("Auto Negotiation not complete\n"); - } - - /* adapt to the half/full speed settings */ - info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; - info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); -} - -/***************************************************************************** - * Read and write a MII PHY register, routines used by MII Utilities - * - * FIXME: These routines are expected to return 0 on success, but mii_send - * does _not_ return an error code. Maybe 0xFFFF means error, i.e. - * no PHY connected... - * For now always return 0. - * FIXME: These routines only work after calling eth_init() at least once! - * Otherwise they hang in mii_send() !!! Sorry! - *****************************************************************************/ - -int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, - unsigned short *value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); -#endif - rdreg = mii_send(mk_mii_read(addr, reg)); - - *value = rdreg; - -#ifdef MII_DEBUG - printf("0x%04x\n", *value); -#endif - - return 0; -} - -int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, - unsigned short value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); -#endif - - rdreg = mii_send(mk_mii_write(addr, reg, value)); - -#ifdef MII_DEBUG - printf("0x%04x\n", value); -#endif - - return 0; -} - -#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/freescale/m5282evb/u-boot.lds b/board/freescale/m5282evb/u-boot.lds index 96fde6538..707b228af 100644 --- a/board/freescale/m5282evb/u-boot.lds +++ b/board/freescale/m5282evb/u-boot.lds @@ -62,7 +62,7 @@ SECTIONS lib_generic/crc32.o (.text) . = env_offset; - common/environment.o(.text) + common/env_embedded.o(.text) *(.text) *(.fixup) diff --git a/board/freescale/m53017evb/Makefile b/board/freescale/m53017evb/Makefile new file mode 100644 index 000000000..981763d20 --- /dev/null +++ b/board/freescale/m53017evb/Makefile @@ -0,0 +1,44 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/m53017evb/config.mk b/board/freescale/m53017evb/config.mk new file mode 100644 index 000000000..ce014edca --- /dev/null +++ b/board/freescale/m53017evb/config.mk @@ -0,0 +1,25 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0 diff --git a/board/freescale/m53017evb/m53017evb.c b/board/freescale/m53017evb/m53017evb.c new file mode 100644 index 000000000..f331786bf --- /dev/null +++ b/board/freescale/m53017evb/m53017evb.c @@ -0,0 +1,94 @@ +/* + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <common.h> +#include <asm/immap.h> + +DECLARE_GLOBAL_DATA_PTR; + +int checkboard(void) +{ + puts("Board: "); + puts("Freescale M53017EVB\n"); + return 0; +}; + +phys_size_t initdram(int board_type) +{ + volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM); + u32 dramsize, i; + + dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000; + + for (i = 0x13; i < 0x20; i++) { + if (dramsize == (1 << i)) + break; + } + i--; + + sdram->cs0 = (CONFIG_SYS_SDRAM_BASE | i); +#ifdef CONFIG_SYS_SDRAM_BASE1 + sdram->cs1 = (CONFIG_SYS_SDRAM_BASE | i); +#endif + sdram->cfg1 = CONFIG_SYS_SDRAM_CFG1; + sdram->cfg2 = CONFIG_SYS_SDRAM_CFG2; + + udelay(500); + + /* Issue PALL */ + sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2); + asm("nop"); + + /* Perform two refresh cycles */ + sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4; + sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4; + asm("nop"); + + /* Issue LEMR */ + sdram->mode = CONFIG_SYS_SDRAM_MODE; + asm("nop"); + sdram->mode = CONFIG_SYS_SDRAM_EMOD; + asm("nop"); + + sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2); + asm("nop"); + + sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000F00; + asm("nop"); + + udelay(100); + + return dramsize; +}; + +int testdram(void) +{ + /* TODO: XXX XXX XXX */ + printf("DRAM test not implemented!\n"); + + return (0); +} diff --git a/board/freescale/m54455evb/u-boot.lds b/board/freescale/m53017evb/u-boot.lds index 1aa53c23f..dc531418c 100644 --- a/board/freescale/m54455evb/u-boot.lds +++ b/board/freescale/m53017evb/u-boot.lds @@ -55,14 +55,14 @@ SECTIONS /* WARNING - the following is hand-optimized to fit within */ /* the sector layout of our flash chips! XXX FIXME XXX */ - cpu/mcf5445x/start.o (.text) - lib_m68k/traps.o (.text) - lib_m68k/interrupts.o (.text) + cpu/mcf532x/start.o (.text) + cpu/mcf532x/libmcf532x.a (.text) + lib_m68k/libm68k.a (.text) common/dlmalloc.o (.text) lib_generic/zlib.o (.text) . = DEFINED(env_offset) ? env_offset : .; - common/environment.o (.text) + common/env_embedded.o (.text) *(.text) *(.fixup) diff --git a/board/freescale/m5329evb/Makefile b/board/freescale/m5329evb/Makefile index ab0f11e9d..07b693c13 100644 --- a/board/freescale/m5329evb/Makefile +++ b/board/freescale/m5329evb/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o mii.o nand.o +COBJS = $(BOARD).o nand.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/freescale/m5329evb/m5329evb.c b/board/freescale/m5329evb/m5329evb.c index f9fa9fb9c..b4df22f1f 100644 --- a/board/freescale/m5329evb/m5329evb.c +++ b/board/freescale/m5329evb/m5329evb.c @@ -42,7 +42,7 @@ phys_size_t initdram(int board_type) volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM); u32 dramsize, i; - dramsize = CFG_SDRAM_SIZE * 0x100000; + dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000; for (i = 0x13; i < 0x20; i++) { if (dramsize == (1 << i)) @@ -50,29 +50,29 @@ phys_size_t initdram(int board_type) } i--; - sdram->cs0 = (CFG_SDRAM_BASE | i); - sdram->cfg1 = CFG_SDRAM_CFG1; - sdram->cfg2 = CFG_SDRAM_CFG2; + sdram->cs0 = (CONFIG_SYS_SDRAM_BASE | i); + sdram->cfg1 = CONFIG_SYS_SDRAM_CFG1; + sdram->cfg2 = CONFIG_SYS_SDRAM_CFG2; /* Issue PALL */ - sdram->ctrl = CFG_SDRAM_CTRL | 2; + sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 2; /* Issue LEMR */ - sdram->mode = CFG_SDRAM_EMOD; - sdram->mode = (CFG_SDRAM_MODE | 0x04000000); + sdram->mode = CONFIG_SYS_SDRAM_EMOD; + sdram->mode = (CONFIG_SYS_SDRAM_MODE | 0x04000000); udelay(500); /* Issue PALL */ - sdram->ctrl = (CFG_SDRAM_CTRL | 2); + sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2); /* Perform two refresh cycles */ - sdram->ctrl = CFG_SDRAM_CTRL | 4; - sdram->ctrl = CFG_SDRAM_CTRL | 4; + sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4; + sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4; - sdram->mode = CFG_SDRAM_MODE; + sdram->mode = CONFIG_SYS_SDRAM_MODE; - sdram->ctrl = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000c00; + sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000c00; udelay(100); diff --git a/board/freescale/m5329evb/mii.c b/board/freescale/m5329evb/mii.c deleted file mode 100644 index 8f6abf3ee..000000000 --- a/board/freescale/m5329evb/mii.c +++ /dev/null @@ -1,306 +0,0 @@ -/* - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/fec.h> -#include <asm/immap.h> - -#include <config.h> -#include <net.h> - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) -#undef MII_DEBUG -#undef ET_DEBUG - -int fecpin_setclear(struct eth_device *dev, int setclear) -{ - volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; - - if (setclear) { - gpio->par_fec |= GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC; - gpio->par_feci2c |= - GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO; - } else { - gpio->par_fec &= ~(GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC); - gpio->par_feci2c &= - ~(GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO); - } - return 0; -} - -#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII) -#include <miiphy.h> - -/* Make MII read/write commands for the FEC. */ -#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) - -#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) - -/* PHY identification */ -#define PHY_ID_LXT970 0x78100000 /* LXT970 */ -#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ -#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ -#define PHY_ID_QS6612 0x01814400 /* QS6612 */ -#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ -#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ -#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ -#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ -#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ - -#define STR_ID_LXT970 "LXT970" -#define STR_ID_LXT971 "LXT971" -#define STR_ID_82555 "Intel82555" -#define STR_ID_QS6612 "QS6612" -#define STR_ID_AMD79C784 "AMD79C784" -#define STR_ID_LSI80225 "LSI80225" -#define STR_ID_LSI80225B "LSI80225/B" -#define STR_ID_DP83848VV "N83848" -#define STR_ID_DP83849 "N83849" - -/**************************************************************************** - * mii_init -- Initialize the MII for MII command without ethernet - * This function is a subset of eth_init - **************************************************************************** - */ -void mii_reset(struct fec_info_s *info) -{ - volatile fec_t *fecp = (fec_t *) (info->miibase); - int i; - - fecp->ecr = FEC_ECR_RESET; - for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { - udelay(1); - } - if (i == FEC_RESET_DELAY) { - printf("FEC_RESET_DELAY timeout\n"); - } -} - -/* send command to phy using mii, wait for result */ -uint mii_send(uint mii_cmd) -{ - struct fec_info_s *info; - struct eth_device *dev; - volatile fec_t *ep; - uint mii_reply; - int j = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - ep = (fec_t *) info->miibase; - - ep->mmfr = mii_cmd; /* command to phy */ - - /* wait for mii complete */ - while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { - udelay(1); - j++; - } - if (j >= MCFFEC_TOUT_LOOP) { - printf("MII not complete\n"); - return -1; - } - - mii_reply = ep->mmfr; /* result from phy */ - ep->eir = FEC_EIR_MII; /* clear MII complete */ -#ifdef ET_DEBUG - printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", - __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); -#endif - - return (mii_reply & 0xffff); /* data read from phy */ -} -#endif /* CFG_DISCOVER_PHY || CONFIG_CMD_MII */ - -#if defined(CFG_DISCOVER_PHY) -int mii_discover_phy(struct eth_device *dev) -{ -#define MAX_PHY_PASSES 11 - struct fec_info_s *info = dev->priv; - int phyaddr, pass; - uint phyno, phytype; - - if (info->phyname_init) - return info->phy_addr; - - phyaddr = -1; /* didn't find a PHY yet */ - for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { - if (pass > 1) { - /* PHY may need more time to recover from reset. - * The LXT970 needs 50ms typical, no maximum is - * specified, so wait 10ms before try again. - * With 11 passes this gives it 100ms to wake up. - */ - udelay(10000); /* wait 10ms */ - } - - for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { - - phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); -#ifdef ET_DEBUG - printf("PHY type 0x%x pass %d type\n", phytype, pass); -#endif - if (phytype != 0xffff) { - phyaddr = phyno; - phytype <<= 16; - phytype |= - mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); - - switch (phytype & 0xffffffff) { - case PHY_ID_DP83848VV: - strcpy(info->phy_name, - STR_ID_DP83848VV); - info->phyname_init = 1; - break; - default: - strcpy(info->phy_name, "unknown"); - info->phyname_init = 1; - break; - } - -#ifdef ET_DEBUG - printf("PHY @ 0x%x pass %d type ", phyno, pass); - switch (phytype & 0xffffffff) { - case PHY_ID_DP83848VV: - printf(STR_ID_DP83848VV); - break; - default: - printf("0x%08x\n", phytype); - break; - } -#endif - } - } - } - if (phyaddr < 0) - printf("No PHY device found.\n"); - - return phyaddr; -} -#endif /* CFG_DISCOVER_PHY */ - -void mii_init(void) __attribute__((weak,alias("__mii_init"))); - -void __mii_init(void) -{ - volatile fec_t *fecp; - struct fec_info_s *info; - struct eth_device *dev; - int miispd = 0, i = 0; - u16 autoneg = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - fecp = (fec_t *) info->miibase; - - fecpin_setclear(dev, 1); - - mii_reset(info); - - /* We use strictly polling mode only */ - fecp->eimr = 0; - - /* Clear any pending interrupt */ - fecp->eir = 0xffffffff; - - /* Set MII speed */ - miispd = (gd->bus_clk / 1000000) / 5; - fecp->mscr = miispd << 1; - - info->phy_addr = mii_discover_phy(dev); - -#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) - while (i < MCFFEC_TOUT_LOOP) { - autoneg = 0; - miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); - i++; - - if ((autoneg & AUTONEGLINK) == AUTONEGLINK) - break; - - udelay(500); - } - if (i >= MCFFEC_TOUT_LOOP) { - printf("Auto Negotiation not complete\n"); - } - - /* adapt to the half/full speed settings */ - info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; - info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); -} - -/***************************************************************************** - * Read and write a MII PHY register, routines used by MII Utilities - * - * FIXME: These routines are expected to return 0 on success, but mii_send - * does _not_ return an error code. Maybe 0xFFFF means error, i.e. - * no PHY connected... - * For now always return 0. - * FIXME: These routines only work after calling eth_init() at least once! - * Otherwise they hang in mii_send() !!! Sorry! - *****************************************************************************/ - -int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, - unsigned short *value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); -#endif - rdreg = mii_send(mk_mii_read(addr, reg)); - - *value = rdreg; - -#ifdef MII_DEBUG - printf("0x%04x\n", *value); -#endif - - return 0; -} - -int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, - unsigned short value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); -#endif - - rdreg = mii_send(mk_mii_write(addr, reg, value)); - -#ifdef MII_DEBUG - printf("0x%04x\n", value); -#endif - - return 0; -} - -#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/freescale/m5329evb/nand.c b/board/freescale/m5329evb/nand.c index f84912e37..cf27dda2f 100644 --- a/board/freescale/m5329evb/nand.c +++ b/board/freescale/m5329evb/nand.c @@ -36,56 +36,42 @@ DECLARE_GLOBAL_DATA_PTR; #include <linux/mtd/mtd.h> #define SET_CLE 0x10 -#define CLR_CLE ~SET_CLE #define SET_ALE 0x08 -#define CLR_ALE ~SET_ALE -static void nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) +static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd, unsigned int ctrl) { struct nand_chip *this = mtdinfo->priv; -/* volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS; TODO: handle wp */ - u32 nand_baseaddr = (u32) this->IO_ADDR_W; + volatile u16 *nCE = (u16 *) CONFIG_SYS_LATCH_ADDR; if (ctrl & NAND_CTRL_CHANGE) { - if ( ctrl & NAND_CLE ) - nand_baseaddr |= SET_CLE; - else - nand_baseaddr &= CLR_CLE; - if ( ctrl & NAND_ALE ) - nand_baseaddr |= SET_ALE; - else - nand_baseaddr &= CLR_ALE; - } - this->IO_ADDR_W = (void __iomem *)(nand_baseaddr); + ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; - if (cmd != NAND_CMD_NONE) - writeb(cmd, this->IO_ADDR_W); -} + IO_ADDR_W &= ~(SET_ALE | SET_CLE); + *nCE &= 0xFFFB; -static void nand_write_byte(struct mtd_info *mtdinfo, u_char byte) -{ - struct nand_chip *this = mtdinfo->priv; - *((volatile u8 *)(this->IO_ADDR_W)) = byte; -} + if (ctrl & NAND_NCE) + *nCE |= 0x0004; + if (ctrl & NAND_CLE) + IO_ADDR_W |= SET_CLE; + if (ctrl & NAND_ALE) + IO_ADDR_W |= SET_ALE; -static u8 nand_read_byte(struct mtd_info *mtdinfo) -{ - struct nand_chip *this = mtdinfo->priv; - return (u8) (*((volatile u8 *)this->IO_ADDR_R)); -} + this->IO_ADDR_W = (void *)IO_ADDR_W; + } -static int nand_dev_ready(struct mtd_info *mtdinfo) -{ - return 1; + if (cmd != NAND_CMD_NONE) + writeb(cmd, this->IO_ADDR_W); } int board_nand_init(struct nand_chip *nand) { volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; - *((volatile u16 *)CFG_LATCH_ADDR) |= 0x0004; - - /* set up pin configuration */ + /* + * set up pin configuration - enabled 2nd output buffer's signals + * (nand_ngpio - nCE USB1/2_PWR_EN, LATCH_GPIOs, LCD_VEEEN, etc) + * to use nCE signal + */ gpio->par_timer &= ~GPIO_PAR_TIN3_TIN3; gpio->pddr_timer |= 0x08; gpio->ppd_timer |= 0x08; @@ -95,9 +81,6 @@ int board_nand_init(struct nand_chip *nand) nand->chip_delay = 50; nand->ecc.mode = NAND_ECC_SOFT; nand->cmd_ctrl = nand_hwcontrol; - nand->read_byte = nand_read_byte; - nand->write_byte = nand_write_byte; - nand->dev_ready = nand_dev_ready; return 0; } diff --git a/board/freescale/m5329evb/u-boot.lds b/board/freescale/m5329evb/u-boot.lds index 1ddfbc470..c9da922ae 100644 --- a/board/freescale/m5329evb/u-boot.lds +++ b/board/freescale/m5329evb/u-boot.lds @@ -62,7 +62,7 @@ SECTIONS lib_generic/zlib.o (.text) . = DEFINED(env_offset) ? env_offset : .; - common/environment.o (.text) + common/env_embedded.o (.text) *(.text) *(.fixup) diff --git a/board/freescale/m5373evb/Makefile b/board/freescale/m5373evb/Makefile index ab0f11e9d..07b693c13 100644 --- a/board/freescale/m5373evb/Makefile +++ b/board/freescale/m5373evb/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o mii.o nand.o +COBJS = $(BOARD).o nand.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/freescale/m5373evb/m5373evb.c b/board/freescale/m5373evb/m5373evb.c index a269ee6d4..376de4b95 100644 --- a/board/freescale/m5373evb/m5373evb.c +++ b/board/freescale/m5373evb/m5373evb.c @@ -42,7 +42,7 @@ phys_size_t initdram(int board_type) volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM); u32 dramsize, i; - dramsize = CFG_SDRAM_SIZE * 0x100000; + dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000; for (i = 0x13; i < 0x20; i++) { if (dramsize == (1 << i)) @@ -50,29 +50,29 @@ phys_size_t initdram(int board_type) } i--; - sdram->cs0 = (CFG_SDRAM_BASE | i); - sdram->cfg1 = CFG_SDRAM_CFG1; - sdram->cfg2 = CFG_SDRAM_CFG2; + sdram->cs0 = (CONFIG_SYS_SDRAM_BASE | i); + sdram->cfg1 = CONFIG_SYS_SDRAM_CFG1; + sdram->cfg2 = CONFIG_SYS_SDRAM_CFG2; /* Issue PALL */ - sdram->ctrl = CFG_SDRAM_CTRL | 2; + sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 2; /* Issue LEMR */ - sdram->mode = CFG_SDRAM_EMOD; - sdram->mode = (CFG_SDRAM_MODE | 0x04000000); + sdram->mode = CONFIG_SYS_SDRAM_EMOD; + sdram->mode = (CONFIG_SYS_SDRAM_MODE | 0x04000000); udelay(500); /* Issue PALL */ - sdram->ctrl = (CFG_SDRAM_CTRL | 2); + sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2); /* Perform two refresh cycles */ - sdram->ctrl = CFG_SDRAM_CTRL | 4; - sdram->ctrl = CFG_SDRAM_CTRL | 4; + sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4; + sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4; - sdram->mode = CFG_SDRAM_MODE; + sdram->mode = CONFIG_SYS_SDRAM_MODE; - sdram->ctrl = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000c00; + sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000c00; udelay(100); diff --git a/board/freescale/m5373evb/mii.c b/board/freescale/m5373evb/mii.c deleted file mode 100644 index 8f6abf3ee..000000000 --- a/board/freescale/m5373evb/mii.c +++ /dev/null @@ -1,306 +0,0 @@ -/* - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/fec.h> -#include <asm/immap.h> - -#include <config.h> -#include <net.h> - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) -#undef MII_DEBUG -#undef ET_DEBUG - -int fecpin_setclear(struct eth_device *dev, int setclear) -{ - volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; - - if (setclear) { - gpio->par_fec |= GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC; - gpio->par_feci2c |= - GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO; - } else { - gpio->par_fec &= ~(GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC); - gpio->par_feci2c &= - ~(GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO); - } - return 0; -} - -#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII) -#include <miiphy.h> - -/* Make MII read/write commands for the FEC. */ -#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) - -#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) - -/* PHY identification */ -#define PHY_ID_LXT970 0x78100000 /* LXT970 */ -#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ -#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ -#define PHY_ID_QS6612 0x01814400 /* QS6612 */ -#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ -#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ -#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ -#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ -#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ - -#define STR_ID_LXT970 "LXT970" -#define STR_ID_LXT971 "LXT971" -#define STR_ID_82555 "Intel82555" -#define STR_ID_QS6612 "QS6612" -#define STR_ID_AMD79C784 "AMD79C784" -#define STR_ID_LSI80225 "LSI80225" -#define STR_ID_LSI80225B "LSI80225/B" -#define STR_ID_DP83848VV "N83848" -#define STR_ID_DP83849 "N83849" - -/**************************************************************************** - * mii_init -- Initialize the MII for MII command without ethernet - * This function is a subset of eth_init - **************************************************************************** - */ -void mii_reset(struct fec_info_s *info) -{ - volatile fec_t *fecp = (fec_t *) (info->miibase); - int i; - - fecp->ecr = FEC_ECR_RESET; - for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { - udelay(1); - } - if (i == FEC_RESET_DELAY) { - printf("FEC_RESET_DELAY timeout\n"); - } -} - -/* send command to phy using mii, wait for result */ -uint mii_send(uint mii_cmd) -{ - struct fec_info_s *info; - struct eth_device *dev; - volatile fec_t *ep; - uint mii_reply; - int j = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - ep = (fec_t *) info->miibase; - - ep->mmfr = mii_cmd; /* command to phy */ - - /* wait for mii complete */ - while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { - udelay(1); - j++; - } - if (j >= MCFFEC_TOUT_LOOP) { - printf("MII not complete\n"); - return -1; - } - - mii_reply = ep->mmfr; /* result from phy */ - ep->eir = FEC_EIR_MII; /* clear MII complete */ -#ifdef ET_DEBUG - printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", - __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); -#endif - - return (mii_reply & 0xffff); /* data read from phy */ -} -#endif /* CFG_DISCOVER_PHY || CONFIG_CMD_MII */ - -#if defined(CFG_DISCOVER_PHY) -int mii_discover_phy(struct eth_device *dev) -{ -#define MAX_PHY_PASSES 11 - struct fec_info_s *info = dev->priv; - int phyaddr, pass; - uint phyno, phytype; - - if (info->phyname_init) - return info->phy_addr; - - phyaddr = -1; /* didn't find a PHY yet */ - for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { - if (pass > 1) { - /* PHY may need more time to recover from reset. - * The LXT970 needs 50ms typical, no maximum is - * specified, so wait 10ms before try again. - * With 11 passes this gives it 100ms to wake up. - */ - udelay(10000); /* wait 10ms */ - } - - for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { - - phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); -#ifdef ET_DEBUG - printf("PHY type 0x%x pass %d type\n", phytype, pass); -#endif - if (phytype != 0xffff) { - phyaddr = phyno; - phytype <<= 16; - phytype |= - mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); - - switch (phytype & 0xffffffff) { - case PHY_ID_DP83848VV: - strcpy(info->phy_name, - STR_ID_DP83848VV); - info->phyname_init = 1; - break; - default: - strcpy(info->phy_name, "unknown"); - info->phyname_init = 1; - break; - } - -#ifdef ET_DEBUG - printf("PHY @ 0x%x pass %d type ", phyno, pass); - switch (phytype & 0xffffffff) { - case PHY_ID_DP83848VV: - printf(STR_ID_DP83848VV); - break; - default: - printf("0x%08x\n", phytype); - break; - } -#endif - } - } - } - if (phyaddr < 0) - printf("No PHY device found.\n"); - - return phyaddr; -} -#endif /* CFG_DISCOVER_PHY */ - -void mii_init(void) __attribute__((weak,alias("__mii_init"))); - -void __mii_init(void) -{ - volatile fec_t *fecp; - struct fec_info_s *info; - struct eth_device *dev; - int miispd = 0, i = 0; - u16 autoneg = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - fecp = (fec_t *) info->miibase; - - fecpin_setclear(dev, 1); - - mii_reset(info); - - /* We use strictly polling mode only */ - fecp->eimr = 0; - - /* Clear any pending interrupt */ - fecp->eir = 0xffffffff; - - /* Set MII speed */ - miispd = (gd->bus_clk / 1000000) / 5; - fecp->mscr = miispd << 1; - - info->phy_addr = mii_discover_phy(dev); - -#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) - while (i < MCFFEC_TOUT_LOOP) { - autoneg = 0; - miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); - i++; - - if ((autoneg & AUTONEGLINK) == AUTONEGLINK) - break; - - udelay(500); - } - if (i >= MCFFEC_TOUT_LOOP) { - printf("Auto Negotiation not complete\n"); - } - - /* adapt to the half/full speed settings */ - info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; - info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); -} - -/***************************************************************************** - * Read and write a MII PHY register, routines used by MII Utilities - * - * FIXME: These routines are expected to return 0 on success, but mii_send - * does _not_ return an error code. Maybe 0xFFFF means error, i.e. - * no PHY connected... - * For now always return 0. - * FIXME: These routines only work after calling eth_init() at least once! - * Otherwise they hang in mii_send() !!! Sorry! - *****************************************************************************/ - -int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, - unsigned short *value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); -#endif - rdreg = mii_send(mk_mii_read(addr, reg)); - - *value = rdreg; - -#ifdef MII_DEBUG - printf("0x%04x\n", *value); -#endif - - return 0; -} - -int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, - unsigned short value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); -#endif - - rdreg = mii_send(mk_mii_write(addr, reg, value)); - -#ifdef MII_DEBUG - printf("0x%04x\n", value); -#endif - - return 0; -} - -#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/freescale/m5373evb/nand.c b/board/freescale/m5373evb/nand.c index 404a9c386..3ebef059e 100644 --- a/board/freescale/m5373evb/nand.c +++ b/board/freescale/m5373evb/nand.c @@ -41,19 +41,21 @@ DECLARE_GLOBAL_DATA_PTR; static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd, unsigned int ctrl) { struct nand_chip *this = mtdinfo->priv; - volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS; - u32 nand_baseaddr = (u32) this->IO_ADDR_W; + volatile u16 *nCE = (u16 *) CONFIG_SYS_LATCH_ADDR; if (ctrl & NAND_CTRL_CHANGE) { ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; - IO_ADDR_W &= ~(SET_ALE | SE_CLE); + IO_ADDR_W &= ~(SET_ALE | SET_CLE); + *nCE &= 0xFFFB; + + if (ctrl & NAND_NCE) + *nCE |= 0x0004; if (ctrl & NAND_CLE) IO_ADDR_W |= SET_CLE; if (ctrl & NAND_ALE) IO_ADDR_W |= SET_ALE; - at91_set_gpio_value(AT91_PIN_PD15, !(ctrl & NAND_NCE)); this->IO_ADDR_W = (void *)IO_ADDR_W; } @@ -67,10 +69,13 @@ int board_nand_init(struct nand_chip *nand) volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS; - *((volatile u16 *)CFG_LATCH_ADDR) |= 0x0004; fbcs->csmr2 &= ~FBCS_CSMR_WP; - /* set up pin configuration */ + /* + * set up pin configuration - enabled 2nd output buffer's signals + * (nand_ngpio - nCE USB1/2_PWR_EN, LATCH_GPIOs, LCD_VEEEN, etc) + * to use nCE signal + */ gpio->par_timer &= ~GPIO_PAR_TIN3_TIN3; gpio->pddr_timer |= 0x08; gpio->ppd_timer |= 0x08; diff --git a/board/freescale/m5373evb/u-boot.lds b/board/freescale/m5373evb/u-boot.lds index d30a401be..fcf1ff1d8 100644 --- a/board/freescale/m5373evb/u-boot.lds +++ b/board/freescale/m5373evb/u-boot.lds @@ -62,7 +62,7 @@ SECTIONS lib_generic/zlib.o (.text) . = DEFINED(env_offset) ? env_offset : .; - common/environment.o (.text) + common/env_embedded.o (.text) *(.text) *(.fixup) diff --git a/board/freescale/m54451evb/Makefile b/board/freescale/m54451evb/Makefile index 74c252869..981763d20 100644 --- a/board/freescale/m54451evb/Makefile +++ b/board/freescale/m54451evb/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o mii.o +COBJS = $(BOARD).o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/freescale/m54451evb/m54451evb.c b/board/freescale/m54451evb/m54451evb.c index 768f40bb0..088c8c4d1 100644 --- a/board/freescale/m54451evb/m54451evb.c +++ b/board/freescale/m54451evb/m54451evb.c @@ -49,16 +49,16 @@ phys_size_t initdram(int board_type) * Serial Boot: The dram is already initialized in start.S * only require to return DRAM size */ - dramsize = CFG_SDRAM_SIZE * 0x100000; + dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000; #else volatile sdramc_t *sdram = (volatile sdramc_t *)(MMAP_SDRAM); volatile gpio_t *gpio = (volatile gpio_t *)(MMAP_GPIO); u32 i; - dramsize = CFG_SDRAM_SIZE * 0x100000; + dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000; - if ((sdram->sdcfg1 == CFG_SDRAM_CFG1) && - (sdram->sdcfg2 == CFG_SDRAM_CFG2)) + if ((sdram->sdcfg1 == CONFIG_SYS_SDRAM_CFG1) && + (sdram->sdcfg2 == CONFIG_SYS_SDRAM_CFG2)) return dramsize; for (i = 0x13; i < 0x20; i++) { @@ -67,32 +67,32 @@ phys_size_t initdram(int board_type) } i--; - gpio->mscr_sdram = CFG_SDRAM_DRV_STRENGTH; + gpio->mscr_sdram = CONFIG_SYS_SDRAM_DRV_STRENGTH; - sdram->sdcs0 = (CFG_SDRAM_BASE | i); + sdram->sdcs0 = (CONFIG_SYS_SDRAM_BASE | i); - sdram->sdcfg1 = CFG_SDRAM_CFG1; - sdram->sdcfg2 = CFG_SDRAM_CFG2; + sdram->sdcfg1 = CONFIG_SYS_SDRAM_CFG1; + sdram->sdcfg2 = CONFIG_SYS_SDRAM_CFG2; udelay(200); /* Issue PALL */ - sdram->sdcr = CFG_SDRAM_CTRL | 2; + sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 2; __asm__("nop"); /* Perform two refresh cycles */ - sdram->sdcr = CFG_SDRAM_CTRL | 4; + sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 4; __asm__("nop"); - sdram->sdcr = CFG_SDRAM_CTRL | 4; + sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 4; __asm__("nop"); /* Issue LEMR */ - sdram->sdmr = CFG_SDRAM_MODE; + sdram->sdmr = CONFIG_SYS_SDRAM_MODE; __asm__("nop"); - sdram->sdmr = CFG_SDRAM_EMOD; + sdram->sdmr = CONFIG_SYS_SDRAM_EMOD; __asm__("nop"); - sdram->sdcr = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000000; + sdram->sdcr = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000000; udelay(100); #endif diff --git a/board/freescale/m54451evb/mii.c b/board/freescale/m54451evb/mii.c deleted file mode 100644 index 5a4330c74..000000000 --- a/board/freescale/m54451evb/mii.c +++ /dev/null @@ -1,303 +0,0 @@ -/* - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/fec.h> -#include <asm/immap.h> - -#include <config.h> -#include <net.h> - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) -#undef MII_DEBUG -#undef ET_DEBUG - -int fecpin_setclear(struct eth_device *dev, int setclear) -{ - volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; - struct fec_info_s *info = (struct fec_info_s *)dev->priv; - - if (setclear) { - gpio->par_feci2c |= - (GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0); - - if (info->iobase == CFG_FEC0_IOBASE) - gpio->par_fec |= GPIO_PAR_FEC_FEC0_RMII_GPIO; - else - gpio->par_fec |= GPIO_PAR_FEC_FEC1_RMII_ATA; - } else { - gpio->par_feci2c &= - ~(GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0); - - if (info->iobase == CFG_FEC0_IOBASE) - gpio->par_fec &= GPIO_PAR_FEC_FEC0_MASK; - else - gpio->par_fec &= GPIO_PAR_FEC_FEC1_MASK; - } - return 0; -} - -#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII) -#include <miiphy.h> - -/* Make MII read/write commands for the FEC. */ -#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) - -#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) - -/* PHY identification */ -#define PHY_ID_KSZ8041NL 0x00221512 -#define STR_ID_KSZ8041NL "KSZ8041NL" - -/**************************************************************************** - * mii_init -- Initialize the MII for MII command without ethernet - * This function is a subset of eth_init - **************************************************************************** - */ -void mii_reset(struct fec_info_s *info) -{ - volatile fec_t *fecp = (fec_t *) (info->miibase); - struct eth_device *dev; - int i, miispd; - u16 rst = 0; - - dev = eth_get_dev(); - - miispd = (gd->bus_clk / 1000000) / 5; - fecp->mscr = miispd << 1; - - miiphy_write(dev->name, info->phy_addr, PHY_BMCR, PHY_BMCR_RESET); - for (i = 0; i < FEC_RESET_DELAY; ++i) { - udelay(500); - miiphy_read(dev->name, info->phy_addr, PHY_BMCR, &rst); - if ((rst & PHY_BMCR_RESET) == 0) - break; - } - if (i == FEC_RESET_DELAY) - printf("Mii reset timeout %d\n", i); -} - -/* send command to phy using mii, wait for result */ -uint mii_send(uint mii_cmd) -{ - struct fec_info_s *info; - struct eth_device *dev; - volatile fec_t *ep; - uint mii_reply; - int j = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - ep = (fec_t *) info->miibase; - - ep->mmfr = mii_cmd; /* command to phy */ - - /* wait for mii complete */ - while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { - udelay(1); - j++; - } - if (j >= MCFFEC_TOUT_LOOP) { - printf("MII not complete\n"); - return -1; - } - - mii_reply = ep->mmfr; /* result from phy */ - ep->eir = FEC_EIR_MII; /* clear MII complete */ -#ifdef ET_DEBUG - printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", - __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); -#endif - - return (mii_reply & 0xffff); /* data read from phy */ -} -#endif /* CFG_DISCOVER_PHY || (CONFIG_MII) */ - -#if defined(CFG_DISCOVER_PHY) -int mii_discover_phy(struct eth_device *dev) -{ -#define MAX_PHY_PASSES 11 - struct fec_info_s *info = dev->priv; - int phyaddr, pass; - uint phyno, phytype; - - if (info->phyname_init) - return info->phy_addr; - - phyaddr = -1; /* didn't find a PHY yet */ - for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { - if (pass > 1) { - /* PHY may need more time to recover from reset. - * The LXT970 needs 50ms typical, no maximum is - * specified, so wait 10ms before try again. - * With 11 passes this gives it 100ms to wake up. - */ - udelay(10000); /* wait 10ms */ - } - - for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { - - phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); -#ifdef ET_DEBUG - printf("PHY type 0x%x pass %d type\n", phytype, pass); -#endif - if (phytype != 0xffff) { - phyaddr = phyno; - phytype <<= 16; - phytype |= - mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); - - switch (phytype & 0xffffffff) { - case PHY_ID_KSZ8041NL: - strcpy(info->phy_name, - STR_ID_KSZ8041NL); - info->phyname_init = 1; - break; - default: - strcpy(info->phy_name, "unknown"); - info->phyname_init = 1; - break; - } - -#ifdef ET_DEBUG - printf("PHY @ 0x%x pass %d type ", phyno, pass); - switch (phytype & 0xffffffff) { - case PHY_ID_KSZ8041NL: - printf(STR_ID_KSZ8041NL); - break; - default: - printf("0x%08x\n", phytype); - break; - } -#endif - } - } - } - if (phyaddr < 0) - printf("No PHY device found.\n"); - - return phyaddr; -} -#endif /* CFG_DISCOVER_PHY */ - -void mii_init(void) __attribute__ ((weak, alias("__mii_init"))); - -void __mii_init(void) -{ - volatile fec_t *fecp; - struct fec_info_s *info; - struct eth_device *dev; - int miispd = 0, i = 0; - u16 autoneg = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - fecp = (fec_t *) info->miibase; - - /* We use strictly polling mode only */ - fecp->eimr = 0; - - /* Clear any pending interrupt */ - fecp->eir = 0xffffffff; - - /* Set MII speed */ - miispd = (gd->bus_clk / 1000000) / 5; - fecp->mscr = miispd << 1; - - info->phy_addr = mii_discover_phy(dev); - -#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) - while (i < MCFFEC_TOUT_LOOP) { - autoneg = 0; - miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); - i++; - - if ((autoneg & AUTONEGLINK) == AUTONEGLINK) - break; - - udelay(500); - } - if (i >= MCFFEC_TOUT_LOOP) { - printf("Auto Negotiation not complete\n"); - } - - /* adapt to the half/full speed settings */ - info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; - info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); -} - -/***************************************************************************** - * Read and write a MII PHY register, routines used by MII Utilities - * - * FIXME: These routines are expected to return 0 on success, but mii_send - * does _not_ return an error code. Maybe 0xFFFF means error, i.e. - * no PHY connected... - * For now always return 0. - * FIXME: These routines only work after calling eth_init() at least once! - * Otherwise they hang in mii_send() !!! Sorry! - *****************************************************************************/ - -int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, - unsigned short *value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); -#endif - rdreg = mii_send(mk_mii_read(addr, reg)); - - *value = rdreg; - -#ifdef MII_DEBUG - printf("0x%04x\n", *value); -#endif - - return 0; -} - -int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, - unsigned short value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); -#endif - - rdreg = mii_send(mk_mii_write(addr, reg, value)); - -#ifdef MII_DEBUG - printf("0x%04x\n", value); -#endif - - return 0; -} - -#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/freescale/m54451evb/u-boot.spa b/board/freescale/m54451evb/u-boot.spa index 22c604865..08e184c1e 100644 --- a/board/freescale/m54451evb/u-boot.spa +++ b/board/freescale/m54451evb/u-boot.spa @@ -62,7 +62,7 @@ SECTIONS lib_generic/zlib.o (.text) . = DEFINED(env_offset) ? env_offset : .; - common/environment.o (.text) + common/env_embedded.o (.text) *(.text) *(.fixup) diff --git a/board/freescale/m54451evb/u-boot.stm b/board/freescale/m54451evb/u-boot.stm index 0752e2715..e9eac67b9 100644 --- a/board/freescale/m54451evb/u-boot.stm +++ b/board/freescale/m54451evb/u-boot.stm @@ -68,7 +68,7 @@ SECTIONS board/freescale/m54455evb/m54455evb.o (.text) . = DEFINED(env_offset) ? env_offset : .; - common/environment.o (.text) + common/env_embedded.o (.text) */ *(.text) *(.fixup) diff --git a/board/freescale/m54455evb/Makefile b/board/freescale/m54455evb/Makefile index 74c252869..981763d20 100644 --- a/board/freescale/m54455evb/Makefile +++ b/board/freescale/m54455evb/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o mii.o +COBJS = $(BOARD).o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/freescale/m54455evb/m54455evb.c b/board/freescale/m54455evb/m54455evb.c index 100682a26..293b5b0e4 100644 --- a/board/freescale/m54455evb/m54455evb.c +++ b/board/freescale/m54455evb/m54455evb.c @@ -45,13 +45,13 @@ phys_size_t initdram(int board_type) * Serial Boot: The dram is already initialized in start.S * only require to return DRAM size */ - dramsize = CFG_SDRAM_SIZE * 0x100000 >> 1; + dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000 >> 1; #else volatile sdramc_t *sdram = (volatile sdramc_t *)(MMAP_SDRAM); volatile gpio_t *gpio = (volatile gpio_t *)(MMAP_GPIO); u32 i; - dramsize = CFG_SDRAM_SIZE * 0x100000 >> 1; + dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000 >> 1; for (i = 0x13; i < 0x20; i++) { if (dramsize == (1 << i)) @@ -59,33 +59,33 @@ phys_size_t initdram(int board_type) } i--; - gpio->mscr_sdram = CFG_SDRAM_DRV_STRENGTH; + gpio->mscr_sdram = CONFIG_SYS_SDRAM_DRV_STRENGTH; - sdram->sdcs0 = (CFG_SDRAM_BASE | i); - sdram->sdcs1 = (CFG_SDRAM_BASE1 | i); + sdram->sdcs0 = (CONFIG_SYS_SDRAM_BASE | i); + sdram->sdcs1 = (CONFIG_SYS_SDRAM_BASE1 | i); - sdram->sdcfg1 = CFG_SDRAM_CFG1; - sdram->sdcfg2 = CFG_SDRAM_CFG2; + sdram->sdcfg1 = CONFIG_SYS_SDRAM_CFG1; + sdram->sdcfg2 = CONFIG_SYS_SDRAM_CFG2; /* Issue PALL */ - sdram->sdcr = CFG_SDRAM_CTRL | 2; + sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 2; /* Issue LEMR */ - sdram->sdmr = CFG_SDRAM_EMOD | 0x408; - sdram->sdmr = CFG_SDRAM_MODE | 0x300; + sdram->sdmr = CONFIG_SYS_SDRAM_EMOD | 0x408; + sdram->sdmr = CONFIG_SYS_SDRAM_MODE | 0x300; udelay(500); /* Issue PALL */ - sdram->sdcr = CFG_SDRAM_CTRL | 2; + sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 2; /* Perform two refresh cycles */ - sdram->sdcr = CFG_SDRAM_CTRL | 4; - sdram->sdcr = CFG_SDRAM_CTRL | 4; + sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 4; + sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 4; - sdram->sdmr = CFG_SDRAM_MODE | 0x200; + sdram->sdmr = CONFIG_SYS_SDRAM_MODE | 0x200; - sdram->sdcr = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000c00; + sdram->sdcr = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000c00; udelay(100); #endif @@ -175,11 +175,11 @@ void pci_init_board(void) #include <flash.h> ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info) { - int sect[] = CFG_ATMEL_SECT; - int sectsz[] = CFG_ATMEL_SECTSZ; + int sect[] = CONFIG_SYS_ATMEL_SECT; + int sectsz[] = CONFIG_SYS_ATMEL_SECTSZ; int i, j, k; - if (base != CFG_ATMEL_BASE) + if (base != CONFIG_SYS_ATMEL_BASE) return 0; info->flash_id = 0x01000000; @@ -205,9 +205,9 @@ ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info) info->name = "CFI conformant"; info->size = 0; - info->sector_count = CFG_ATMEL_TOTALSECT; + info->sector_count = CONFIG_SYS_ATMEL_TOTALSECT; info->start[0] = base; - for (k = 0, i = 0; i < CFG_ATMEL_REGION; i++) { + for (k = 0, i = 0; i < CONFIG_SYS_ATMEL_REGION; i++) { info->size += sect[i] * sectsz[i]; for (j = 0; j < sect[i]; j++, k++) { @@ -218,4 +218,4 @@ ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info) return 1; } -#endif /* CFG_FLASH_CFI */ +#endif /* CONFIG_SYS_FLASH_CFI */ diff --git a/board/freescale/m54455evb/mii.c b/board/freescale/m54455evb/mii.c deleted file mode 100644 index 0be5439ef..000000000 --- a/board/freescale/m54455evb/mii.c +++ /dev/null @@ -1,324 +0,0 @@ -/* - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/fec.h> -#include <asm/immap.h> - -#include <config.h> -#include <net.h> - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) -#undef MII_DEBUG -#undef ET_DEBUG - -int fecpin_setclear(struct eth_device *dev, int setclear) -{ - volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; - struct fec_info_s *info = (struct fec_info_s *)dev->priv; - - if (setclear) { - gpio->par_feci2c |= - (GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0); - - if (info->iobase == CFG_FEC0_IOBASE) - gpio->par_fec |= GPIO_PAR_FEC_FEC0_RMII_GPIO; - else - gpio->par_fec |= GPIO_PAR_FEC_FEC1_RMII_ATA; - } else { - gpio->par_feci2c &= - ~(GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0); - - if (info->iobase == CFG_FEC0_IOBASE) - gpio->par_fec &= GPIO_PAR_FEC_FEC0_MASK; - else - gpio->par_fec &= GPIO_PAR_FEC_FEC1_MASK; - } - return 0; -} - -#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII) -#include <miiphy.h> - -/* Make MII read/write commands for the FEC. */ -#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) - -#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) - -/* PHY identification */ -#define PHY_ID_LXT970 0x78100000 /* LXT970 */ -#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ -#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ -#define PHY_ID_QS6612 0x01814400 /* QS6612 */ -#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ -#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ -#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ -#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ -#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ - -#define STR_ID_LXT970 "LXT970" -#define STR_ID_LXT971 "LXT971" -#define STR_ID_82555 "Intel82555" -#define STR_ID_QS6612 "QS6612" -#define STR_ID_AMD79C784 "AMD79C784" -#define STR_ID_LSI80225 "LSI80225" -#define STR_ID_LSI80225B "LSI80225/B" -#define STR_ID_DP83848VV "N83848" -#define STR_ID_DP83849 "N83849" - -/**************************************************************************** - * mii_init -- Initialize the MII for MII command without ethernet - * This function is a subset of eth_init - **************************************************************************** - */ -void mii_reset(struct fec_info_s *info) -{ - volatile fec_t *fecp = (fec_t *) (info->miibase); - struct eth_device *dev; - int i, miispd; - u16 rst = 0; - - dev = eth_get_dev(); - - miispd = (gd->bus_clk / 1000000) / 5; - fecp->mscr = miispd << 1; - - miiphy_write(dev->name, info->phy_addr, PHY_BMCR, PHY_BMCR_RESET); - for (i = 0; i < FEC_RESET_DELAY; ++i) { - udelay(500); - miiphy_read(dev->name, info->phy_addr, PHY_BMCR, &rst); - if ((rst & PHY_BMCR_RESET) == 0) - break; - } - if (i == FEC_RESET_DELAY) - printf("Mii reset timeout %d\n", i); -} - -/* send command to phy using mii, wait for result */ -uint mii_send(uint mii_cmd) -{ - struct fec_info_s *info; - struct eth_device *dev; - volatile fec_t *ep; - uint mii_reply; - int j = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - ep = (fec_t *) info->miibase; - - ep->mmfr = mii_cmd; /* command to phy */ - - /* wait for mii complete */ - while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { - udelay(1); - j++; - } - if (j >= MCFFEC_TOUT_LOOP) { - printf("MII not complete\n"); - return -1; - } - - mii_reply = ep->mmfr; /* result from phy */ - ep->eir = FEC_EIR_MII; /* clear MII complete */ -#ifdef ET_DEBUG - printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", - __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); -#endif - - return (mii_reply & 0xffff); /* data read from phy */ -} -#endif /* CFG_DISCOVER_PHY || (CONFIG_MII) */ - -#if defined(CFG_DISCOVER_PHY) -int mii_discover_phy(struct eth_device *dev) -{ -#define MAX_PHY_PASSES 11 - struct fec_info_s *info = dev->priv; - int phyaddr, pass; - uint phyno, phytype; - - if (info->phyname_init) - return info->phy_addr; - - phyaddr = -1; /* didn't find a PHY yet */ - for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { - if (pass > 1) { - /* PHY may need more time to recover from reset. - * The LXT970 needs 50ms typical, no maximum is - * specified, so wait 10ms before try again. - * With 11 passes this gives it 100ms to wake up. - */ - udelay(10000); /* wait 10ms */ - } - - for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { - - phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); -#ifdef ET_DEBUG - printf("PHY type 0x%x pass %d type\n", phytype, pass); -#endif - if (phytype != 0xffff) { - phyaddr = phyno; - phytype <<= 16; - phytype |= - mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); - - switch (phytype & 0xffffffff) { - case PHY_ID_DP83848VV: - strcpy(info->phy_name, - STR_ID_DP83848VV); - info->phyname_init = 1; - break; - default: - strcpy(info->phy_name, "unknown"); - info->phyname_init = 1; - break; - } - -#ifdef ET_DEBUG - printf("PHY @ 0x%x pass %d type ", phyno, pass); - switch (phytype & 0xffffffff) { - case PHY_ID_DP83848VV: - printf(STR_ID_DP83848VV); - break; - default: - printf("0x%08x\n", phytype); - break; - } -#endif - } - } - } - if (phyaddr < 0) - printf("No PHY device found.\n"); - - return phyaddr; -} -#endif /* CFG_DISCOVER_PHY */ - -void mii_init(void) __attribute__((weak,alias("__mii_init"))); - -void __mii_init(void) -{ - volatile fec_t *fecp; - struct fec_info_s *info; - struct eth_device *dev; - int miispd = 0, i = 0; - u16 autoneg = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - fecp = (fec_t *) info->miibase; - - fecpin_setclear(dev, 1); - - mii_reset(info); - - /* We use strictly polling mode only */ - fecp->eimr = 0; - - /* Clear any pending interrupt */ - fecp->eir = 0xffffffff; - - /* Set MII speed */ - miispd = (gd->bus_clk / 1000000) / 5; - fecp->mscr = miispd << 1; - - info->phy_addr = mii_discover_phy(dev); - -#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) - while (i < MCFFEC_TOUT_LOOP) { - autoneg = 0; - miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); - i++; - - if ((autoneg & AUTONEGLINK) == AUTONEGLINK) - break; - - udelay(500); - } - if (i >= MCFFEC_TOUT_LOOP) { - printf("Auto Negotiation not complete\n"); - } - - /* adapt to the half/full speed settings */ - info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; - info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); -} - -/***************************************************************************** - * Read and write a MII PHY register, routines used by MII Utilities - * - * FIXME: These routines are expected to return 0 on success, but mii_send - * does _not_ return an error code. Maybe 0xFFFF means error, i.e. - * no PHY connected... - * For now always return 0. - * FIXME: These routines only work after calling eth_init() at least once! - * Otherwise they hang in mii_send() !!! Sorry! - *****************************************************************************/ - -int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, - unsigned short *value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); -#endif - rdreg = mii_send(mk_mii_read(addr, reg)); - - *value = rdreg; - -#ifdef MII_DEBUG - printf("0x%04x\n", *value); -#endif - - return 0; -} - -int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, - unsigned short value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); -#endif - - rdreg = mii_send(mk_mii_write(addr, reg, value)); - -#ifdef MII_DEBUG - printf("0x%04x\n", value); -#endif - - return 0; -} - -#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/freescale/m54455evb/u-boot.atm b/board/freescale/m54455evb/u-boot.atm index 22c604865..08e184c1e 100644 --- a/board/freescale/m54455evb/u-boot.atm +++ b/board/freescale/m54455evb/u-boot.atm @@ -62,7 +62,7 @@ SECTIONS lib_generic/zlib.o (.text) . = DEFINED(env_offset) ? env_offset : .; - common/environment.o (.text) + common/env_embedded.o (.text) *(.text) *(.fixup) diff --git a/board/freescale/m547xevb/Makefile b/board/freescale/m547xevb/Makefile index 74c252869..981763d20 100644 --- a/board/freescale/m547xevb/Makefile +++ b/board/freescale/m547xevb/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o mii.o +COBJS = $(BOARD).o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/freescale/m547xevb/m547xevb.c b/board/freescale/m547xevb/m547xevb.c index 6d7d27090..9f1ec3854 100644 --- a/board/freescale/m547xevb/m547xevb.c +++ b/board/freescale/m547xevb/m547xevb.c @@ -43,53 +43,53 @@ phys_size_t initdram(int board_type) volatile siu_t *siu = (siu_t *) (MMAP_SIU); volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM); u32 dramsize, i; -#ifdef CFG_DRAMSZ1 +#ifdef CONFIG_SYS_DRAMSZ1 u32 temp; #endif - siu->drv = CFG_SDRAM_DRVSTRENGTH; + siu->drv = CONFIG_SYS_SDRAM_DRVSTRENGTH; - dramsize = CFG_DRAMSZ * 0x100000; + dramsize = CONFIG_SYS_DRAMSZ * 0x100000; for (i = 0x13; i < 0x20; i++) { if (dramsize == (1 << i)) break; } i--; - siu->cs0cfg = (CFG_SDRAM_BASE | i); + siu->cs0cfg = (CONFIG_SYS_SDRAM_BASE | i); -#ifdef CFG_DRAMSZ1 - temp = CFG_DRAMSZ1 * 0x100000; +#ifdef CONFIG_SYS_DRAMSZ1 + temp = CONFIG_SYS_DRAMSZ1 * 0x100000; for (i = 0x13; i < 0x20; i++) { if (temp == (1 << i)) break; } i--; dramsize += temp; - siu->cs1cfg = ((CFG_SDRAM_BASE + temp) | i); + siu->cs1cfg = ((CONFIG_SYS_SDRAM_BASE + temp) | i); #endif - sdram->cfg1 = CFG_SDRAM_CFG1; - sdram->cfg2 = CFG_SDRAM_CFG2; + sdram->cfg1 = CONFIG_SYS_SDRAM_CFG1; + sdram->cfg2 = CONFIG_SYS_SDRAM_CFG2; /* Issue PALL */ - sdram->ctrl = CFG_SDRAM_CTRL | 2; + sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 2; /* Issue LEMR */ - sdram->mode = CFG_SDRAM_EMOD; - sdram->mode = (CFG_SDRAM_MODE | 0x04000000); + sdram->mode = CONFIG_SYS_SDRAM_EMOD; + sdram->mode = (CONFIG_SYS_SDRAM_MODE | 0x04000000); udelay(500); /* Issue PALL */ - sdram->ctrl = (CFG_SDRAM_CTRL | 2); + sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2); /* Perform two refresh cycles */ - sdram->ctrl = CFG_SDRAM_CTRL | 4; - sdram->ctrl = CFG_SDRAM_CTRL | 4; + sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4; + sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4; - sdram->mode = CFG_SDRAM_MODE; + sdram->mode = CONFIG_SYS_SDRAM_MODE; - sdram->ctrl = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000F00; + sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000F00; udelay(100); diff --git a/board/freescale/m547xevb/mii.c b/board/freescale/m547xevb/mii.c deleted file mode 100644 index 5b2683b6c..000000000 --- a/board/freescale/m547xevb/mii.c +++ /dev/null @@ -1,322 +0,0 @@ -/* - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <config.h> -#include <net.h> - -#include <asm/immap.h> -#include <asm/fec.h> -#include <asm/fsl_mcdmafec.h> - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) -#undef MII_DEBUG -#undef ET_DEBUG - -int fecpin_setclear(struct eth_device *dev, int setclear) -{ - volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; - struct fec_info_dma *info = (struct fec_info_dma *)dev->priv; - - if (setclear) { - if (info->iobase == CFG_FEC0_IOBASE) - gpio->par_feci2cirq |= 0xF000; - else - gpio->par_feci2cirq |= 0x0FC0; - } else { - if (info->iobase == CFG_FEC0_IOBASE) - gpio->par_feci2cirq &= 0x0FFF; - else - gpio->par_feci2cirq &= 0xF03F; - } - return 0; -} - -#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII) -#include <miiphy.h> - -/* Make MII read/write commands for the FEC. */ -#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) - -#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) - -/* PHY identification */ -#define PHY_ID_LXT970 0x78100000 /* LXT970 */ -#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ -#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ -#define PHY_ID_QS6612 0x01814400 /* QS6612 */ -#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ -#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ -#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ -#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ -#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ -#define PHY_ID_BCM5222 0x00406322 /* Broadcom 5222 */ - -#define STR_ID_LXT970 "LXT970" -#define STR_ID_LXT971 "LXT971" -#define STR_ID_82555 "Intel82555" -#define STR_ID_QS6612 "QS6612" -#define STR_ID_AMD79C784 "AMD79C784" -#define STR_ID_LSI80225 "LSI80225" -#define STR_ID_LSI80225B "LSI80225/B" -#define STR_ID_DP83848VV "N83848" -#define STR_ID_DP83849 "N83849" -#define STR_ID_BCM5222 "BCM5222" - -/**************************************************************************** - * mii_init -- Initialize the MII for MII command without ethernet - * This function is a subset of eth_init - **************************************************************************** - */ -void mii_reset(struct fec_info_dma *info) -{ - volatile fecdma_t *fecp = (fecdma_t *) (info->miibase); - int i; - - fecp->ecr = FEC_ECR_RESET; - for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { - udelay(1); - } - if (i == FEC_RESET_DELAY) { - printf("FEC_RESET_DELAY timeout\n"); - } -} - -/* send command to phy using mii, wait for result */ -uint mii_send(uint mii_cmd) -{ - struct fec_info_dma *info; - struct eth_device *dev; - volatile fecdma_t *ep; - uint mii_reply; - int j = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - ep = (fecdma_t *) info->miibase; - - ep->mmfr = mii_cmd; /* command to phy */ - - /* wait for mii complete */ - while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { - udelay(1); - j++; - } - if (j >= MCFFEC_TOUT_LOOP) { - printf("MII not complete\n"); - return -1; - } - - mii_reply = ep->mmfr; /* result from phy */ - ep->eir = FEC_EIR_MII; /* clear MII complete */ -#ifdef ET_DEBUG - printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", - __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); -#endif - - return (mii_reply & 0xffff); /* data read from phy */ -} -#endif /* CFG_DISCOVER_PHY || CONFIG_CMD_MII */ - -#if defined(CFG_DISCOVER_PHY) -int mii_discover_phy(struct eth_device *dev) -{ -#define MAX_PHY_PASSES 11 - struct fec_info_dma *info = dev->priv; - int phyaddr, pass, temp; - uint phyno, phytype; - - if (info->phyname_init) { - return info->phy_addr; - } - - phyaddr = -1; /* didn't find a PHY yet */ - for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { - if (pass > 1) { - /* PHY may need more time to recover from reset. - * The LXT970 needs 50ms typical, no maximum is - * specified, so wait 10ms before try again. - * With 11 passes this gives it 100ms to wake up. - */ - udelay(10000); /* wait 10ms */ - } - - temp = 0; - if (info->index > 0) { - /* Some phy have multiple address, to solve the issue - where phyno keeps starting from 0, check the - previous phy address if both miibase are the same. */ - if (info->miibase == (info->next)->miibase) { - temp = (info->next)->phy_addr + 1; - } - } - - for (phyno = temp; phyno < 32 && phyaddr < 0; ++phyno) { - - phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); -#ifdef ET_DEBUG - printf("PHY type 0x%x pass %d type\n", phytype, pass); -#endif - if (phytype != 0xffff) { - phyaddr = phyno; - phytype <<= 16; - phytype |= - mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); - - switch (phytype & 0xffffffff) { - case PHY_ID_BCM5222: - strcpy(info->phy_name, STR_ID_BCM5222); - info->phyname_init = 1; - break; - default: - strcpy(info->phy_name, "unknown"); - info->phyname_init = 1; - break; - } - -#ifdef ET_DEBUG - printf("PHY @ 0x%x pass %d type ", phyno, pass); - switch (phytype & 0xffffffff) { - case PHY_ID_BCM5222: - printf(STR_ID_BCM5222); - break; - default: - printf("0x%08x\n", phytype); - break; - } -#endif - } - } - } - if (phyaddr < 0) - printf("No PHY device found.\n"); - - return phyaddr; -} -#endif /* CFG_DISCOVER_PHY */ - -void mii_init(void) __attribute__ ((weak, alias("__mii_init"))); - -void __mii_init(void) -{ - volatile fecdma_t *fecp; - struct fec_info_dma *info; - struct eth_device *dev; - int miispd = 0, i = 0; - u16 autoneg = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - fecp = (fecdma_t *) info->miibase; - - fecpin_setclear(dev, 1); - - mii_reset(info); - - /* We use strictly polling mode only */ - fecp->eimr = 0; - - /* Clear any pending interrupt */ - fecp->eir = 0xffffffff; - - /* Set MII speed */ - miispd = (gd->bus_clk / 1000000) / 5; - fecp->mscr = miispd << 1; - - info->phy_addr = mii_discover_phy(dev); - -#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) - while (i < MCFFEC_TOUT_LOOP) { - autoneg = 0; - miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); - i++; - - if ((autoneg & AUTONEGLINK) == AUTONEGLINK) - break; - - udelay(500); - } - if (i >= MCFFEC_TOUT_LOOP) { - printf("Auto Negotiation not complete\n"); - } - - /* adapt to the half/full speed settings */ - info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; - info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); -} - -/***************************************************************************** - * Read and write a MII PHY register, routines used by MII Utilities - * - * FIXME: These routines are expected to return 0 on success, but mii_send - * does _not_ return an error code. Maybe 0xFFFF means error, i.e. - * no PHY connected... - * For now always return 0. - * FIXME: These routines only work after calling eth_init() at least once! - * Otherwise they hang in mii_send() !!! Sorry! - *****************************************************************************/ - -int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, - unsigned short *value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); -#endif - rdreg = mii_send(mk_mii_read(addr, reg)); - - *value = rdreg; - -#ifdef MII_DEBUG - printf("0x%04x\n", *value); -#endif - - return 0; -} - -int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, - unsigned short value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); -#endif - - rdreg = mii_send(mk_mii_write(addr, reg, value)); - -#ifdef MII_DEBUG - printf("0x%04x\n", value); -#endif - - return 0; -} - -#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/freescale/m547xevb/u-boot.lds b/board/freescale/m547xevb/u-boot.lds index cc7f3eba8..c25c8dcdc 100644 --- a/board/freescale/m547xevb/u-boot.lds +++ b/board/freescale/m547xevb/u-boot.lds @@ -61,7 +61,7 @@ SECTIONS common/dlmalloc.o (.text) . = DEFINED(env_offset) ? env_offset : .; - common/environment.o (.text) + common/env_embedded.o (.text) *(.text) *(.fixup) diff --git a/board/freescale/m548xevb/Makefile b/board/freescale/m548xevb/Makefile index 74c252869..981763d20 100644 --- a/board/freescale/m548xevb/Makefile +++ b/board/freescale/m548xevb/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o mii.o +COBJS = $(BOARD).o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/freescale/m548xevb/m548xevb.c b/board/freescale/m548xevb/m548xevb.c index e6510c955..4a2a5c78f 100644 --- a/board/freescale/m548xevb/m548xevb.c +++ b/board/freescale/m548xevb/m548xevb.c @@ -44,49 +44,49 @@ phys_size_t initdram(int board_type) volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM); u32 dramsize, i; - siu->drv = CFG_SDRAM_DRVSTRENGTH; + siu->drv = CONFIG_SYS_SDRAM_DRVSTRENGTH; - dramsize = CFG_DRAMSZ * 0x100000; + dramsize = CONFIG_SYS_DRAMSZ * 0x100000; for (i = 0x13; i < 0x20; i++) { if (dramsize == (1 << i)) break; } i--; - siu->cs0cfg = (CFG_SDRAM_BASE | i); + siu->cs0cfg = (CONFIG_SYS_SDRAM_BASE | i); -#ifdef CFG_DRAMSZ1 - temp = CFG_DRAMSZ1 * 0x100000; +#ifdef CONFIG_SYS_DRAMSZ1 + temp = CONFIG_SYS_DRAMSZ1 * 0x100000; for (i = 0x13; i < 0x20; i++) { if (temp == (1 << i)) break; } i--; dramsize += temp; - siu->cs1cfg = ((CFG_SDRAM_BASE + temp) | i); + siu->cs1cfg = ((CONFIG_SYS_SDRAM_BASE + temp) | i); #endif - sdram->cfg1 = CFG_SDRAM_CFG1; - sdram->cfg2 = CFG_SDRAM_CFG2; + sdram->cfg1 = CONFIG_SYS_SDRAM_CFG1; + sdram->cfg2 = CONFIG_SYS_SDRAM_CFG2; /* Issue PALL */ - sdram->ctrl = CFG_SDRAM_CTRL | 2; + sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 2; /* Issue LEMR */ - sdram->mode = CFG_SDRAM_EMOD; - sdram->mode = (CFG_SDRAM_MODE | 0x04000000); + sdram->mode = CONFIG_SYS_SDRAM_EMOD; + sdram->mode = (CONFIG_SYS_SDRAM_MODE | 0x04000000); udelay(500); /* Issue PALL */ - sdram->ctrl = (CFG_SDRAM_CTRL | 2); + sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2); /* Perform two refresh cycles */ - sdram->ctrl = CFG_SDRAM_CTRL | 4; - sdram->ctrl = CFG_SDRAM_CTRL | 4; + sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4; + sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4; - sdram->mode = CFG_SDRAM_MODE; + sdram->mode = CONFIG_SYS_SDRAM_MODE; - sdram->ctrl = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000F00; + sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000F00; udelay(100); diff --git a/board/freescale/m548xevb/mii.c b/board/freescale/m548xevb/mii.c deleted file mode 100644 index 5b2683b6c..000000000 --- a/board/freescale/m548xevb/mii.c +++ /dev/null @@ -1,322 +0,0 @@ -/* - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <config.h> -#include <net.h> - -#include <asm/immap.h> -#include <asm/fec.h> -#include <asm/fsl_mcdmafec.h> - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) -#undef MII_DEBUG -#undef ET_DEBUG - -int fecpin_setclear(struct eth_device *dev, int setclear) -{ - volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; - struct fec_info_dma *info = (struct fec_info_dma *)dev->priv; - - if (setclear) { - if (info->iobase == CFG_FEC0_IOBASE) - gpio->par_feci2cirq |= 0xF000; - else - gpio->par_feci2cirq |= 0x0FC0; - } else { - if (info->iobase == CFG_FEC0_IOBASE) - gpio->par_feci2cirq &= 0x0FFF; - else - gpio->par_feci2cirq &= 0xF03F; - } - return 0; -} - -#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII) -#include <miiphy.h> - -/* Make MII read/write commands for the FEC. */ -#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) - -#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) - -/* PHY identification */ -#define PHY_ID_LXT970 0x78100000 /* LXT970 */ -#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ -#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ -#define PHY_ID_QS6612 0x01814400 /* QS6612 */ -#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ -#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ -#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ -#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ -#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ -#define PHY_ID_BCM5222 0x00406322 /* Broadcom 5222 */ - -#define STR_ID_LXT970 "LXT970" -#define STR_ID_LXT971 "LXT971" -#define STR_ID_82555 "Intel82555" -#define STR_ID_QS6612 "QS6612" -#define STR_ID_AMD79C784 "AMD79C784" -#define STR_ID_LSI80225 "LSI80225" -#define STR_ID_LSI80225B "LSI80225/B" -#define STR_ID_DP83848VV "N83848" -#define STR_ID_DP83849 "N83849" -#define STR_ID_BCM5222 "BCM5222" - -/**************************************************************************** - * mii_init -- Initialize the MII for MII command without ethernet - * This function is a subset of eth_init - **************************************************************************** - */ -void mii_reset(struct fec_info_dma *info) -{ - volatile fecdma_t *fecp = (fecdma_t *) (info->miibase); - int i; - - fecp->ecr = FEC_ECR_RESET; - for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { - udelay(1); - } - if (i == FEC_RESET_DELAY) { - printf("FEC_RESET_DELAY timeout\n"); - } -} - -/* send command to phy using mii, wait for result */ -uint mii_send(uint mii_cmd) -{ - struct fec_info_dma *info; - struct eth_device *dev; - volatile fecdma_t *ep; - uint mii_reply; - int j = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - ep = (fecdma_t *) info->miibase; - - ep->mmfr = mii_cmd; /* command to phy */ - - /* wait for mii complete */ - while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { - udelay(1); - j++; - } - if (j >= MCFFEC_TOUT_LOOP) { - printf("MII not complete\n"); - return -1; - } - - mii_reply = ep->mmfr; /* result from phy */ - ep->eir = FEC_EIR_MII; /* clear MII complete */ -#ifdef ET_DEBUG - printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", - __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); -#endif - - return (mii_reply & 0xffff); /* data read from phy */ -} -#endif /* CFG_DISCOVER_PHY || CONFIG_CMD_MII */ - -#if defined(CFG_DISCOVER_PHY) -int mii_discover_phy(struct eth_device *dev) -{ -#define MAX_PHY_PASSES 11 - struct fec_info_dma *info = dev->priv; - int phyaddr, pass, temp; - uint phyno, phytype; - - if (info->phyname_init) { - return info->phy_addr; - } - - phyaddr = -1; /* didn't find a PHY yet */ - for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { - if (pass > 1) { - /* PHY may need more time to recover from reset. - * The LXT970 needs 50ms typical, no maximum is - * specified, so wait 10ms before try again. - * With 11 passes this gives it 100ms to wake up. - */ - udelay(10000); /* wait 10ms */ - } - - temp = 0; - if (info->index > 0) { - /* Some phy have multiple address, to solve the issue - where phyno keeps starting from 0, check the - previous phy address if both miibase are the same. */ - if (info->miibase == (info->next)->miibase) { - temp = (info->next)->phy_addr + 1; - } - } - - for (phyno = temp; phyno < 32 && phyaddr < 0; ++phyno) { - - phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); -#ifdef ET_DEBUG - printf("PHY type 0x%x pass %d type\n", phytype, pass); -#endif - if (phytype != 0xffff) { - phyaddr = phyno; - phytype <<= 16; - phytype |= - mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); - - switch (phytype & 0xffffffff) { - case PHY_ID_BCM5222: - strcpy(info->phy_name, STR_ID_BCM5222); - info->phyname_init = 1; - break; - default: - strcpy(info->phy_name, "unknown"); - info->phyname_init = 1; - break; - } - -#ifdef ET_DEBUG - printf("PHY @ 0x%x pass %d type ", phyno, pass); - switch (phytype & 0xffffffff) { - case PHY_ID_BCM5222: - printf(STR_ID_BCM5222); - break; - default: - printf("0x%08x\n", phytype); - break; - } -#endif - } - } - } - if (phyaddr < 0) - printf("No PHY device found.\n"); - - return phyaddr; -} -#endif /* CFG_DISCOVER_PHY */ - -void mii_init(void) __attribute__ ((weak, alias("__mii_init"))); - -void __mii_init(void) -{ - volatile fecdma_t *fecp; - struct fec_info_dma *info; - struct eth_device *dev; - int miispd = 0, i = 0; - u16 autoneg = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - fecp = (fecdma_t *) info->miibase; - - fecpin_setclear(dev, 1); - - mii_reset(info); - - /* We use strictly polling mode only */ - fecp->eimr = 0; - - /* Clear any pending interrupt */ - fecp->eir = 0xffffffff; - - /* Set MII speed */ - miispd = (gd->bus_clk / 1000000) / 5; - fecp->mscr = miispd << 1; - - info->phy_addr = mii_discover_phy(dev); - -#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) - while (i < MCFFEC_TOUT_LOOP) { - autoneg = 0; - miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); - i++; - - if ((autoneg & AUTONEGLINK) == AUTONEGLINK) - break; - - udelay(500); - } - if (i >= MCFFEC_TOUT_LOOP) { - printf("Auto Negotiation not complete\n"); - } - - /* adapt to the half/full speed settings */ - info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; - info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); -} - -/***************************************************************************** - * Read and write a MII PHY register, routines used by MII Utilities - * - * FIXME: These routines are expected to return 0 on success, but mii_send - * does _not_ return an error code. Maybe 0xFFFF means error, i.e. - * no PHY connected... - * For now always return 0. - * FIXME: These routines only work after calling eth_init() at least once! - * Otherwise they hang in mii_send() !!! Sorry! - *****************************************************************************/ - -int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, - unsigned short *value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); -#endif - rdreg = mii_send(mk_mii_read(addr, reg)); - - *value = rdreg; - -#ifdef MII_DEBUG - printf("0x%04x\n", *value); -#endif - - return 0; -} - -int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, - unsigned short value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); -#endif - - rdreg = mii_send(mk_mii_write(addr, reg, value)); - -#ifdef MII_DEBUG - printf("0x%04x\n", value); -#endif - - return 0; -} - -#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/freescale/m548xevb/u-boot.lds b/board/freescale/m548xevb/u-boot.lds index cc7f3eba8..c25c8dcdc 100644 --- a/board/freescale/m548xevb/u-boot.lds +++ b/board/freescale/m548xevb/u-boot.lds @@ -61,7 +61,7 @@ SECTIONS common/dlmalloc.o (.text) . = DEFINED(env_offset) ? env_offset : .; - common/environment.o (.text) + common/env_embedded.o (.text) *(.text) *(.fixup) diff --git a/board/freescale/mpc7448hpc2/asm_init.S b/board/freescale/mpc7448hpc2/asm_init.S index 521301fce..b9495fd34 100644 --- a/board/freescale/mpc7448hpc2/asm_init.S +++ b/board/freescale/mpc7448hpc2/asm_init.S @@ -123,7 +123,7 @@ board_asm_init: /* Initialize pointer to Tsi108 register space */ - LOAD_PTR(r29,CFG_TSI108_CSR_RST_BASE)/* r29 - pointer to tsi108 CSR space */ + LOAD_PTR(r29,CONFIG_SYS_TSI108_CSR_RST_BASE)/* r29 - pointer to tsi108 CSR space */ ori r4,r29,TSI108_PB_REG_OFFSET /* Check Processor Version Number */ @@ -214,12 +214,12 @@ do_tsi108_init: ori r4,r29,TSI108_PB_REG_OFFSET -#if (CFG_TSI108_CSR_BASE != CFG_TSI108_CSR_RST_BASE) +#if (CONFIG_SYS_TSI108_CSR_BASE != CONFIG_SYS_TSI108_CSR_RST_BASE) /* Relocate (if required) Tsi108 registers. Set new value for * PB_REG_BAR: * Note we are in the 32-bit address mode. */ - LOAD_U32(r5,(CFG_TSI108_CSR_BASE | 0x01)) /* PB_REG_BAR: BA + EN */ + LOAD_U32(r5,(CONFIG_SYS_TSI108_CSR_BASE | 0x01)) /* PB_REG_BAR: BA + EN */ stw r5,PB_REG_BAR(r4) andis. r29,r5,0xFFFF sync diff --git a/board/freescale/mpc7448hpc2/mpc7448hpc2.c b/board/freescale/mpc7448hpc2/mpc7448hpc2.c index 6f74c314e..117b951c5 100644 --- a/board/freescale/mpc7448hpc2/mpc7448hpc2.c +++ b/board/freescale/mpc7448hpc2/mpc7448hpc2.c @@ -32,6 +32,7 @@ #include <common.h> #include <74xx_7xx.h> #include <fdt_support.h> +#include <netdev.h> #undef DEBUG @@ -59,7 +60,7 @@ int checkboard (void) { int l_type = 0; - printf ("BOARD: %s\n", CFG_BOARD_NAME); + printf ("BOARD: %s\n", CONFIG_SYS_BOARD_NAME); return (l_type); } @@ -92,3 +93,12 @@ ft_board_setup(void *blob, bd_t *bd) fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); } #endif + +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#if defined(CONFIG_TSI108_ETH) + rc = tsi108_eth_initialize(bis); +#endif + return rc; +} diff --git a/board/freescale/mpc7448hpc2/tsi108_init.c b/board/freescale/mpc7448hpc2/tsi108_init.c index 9c40b72a1..74bb564ed 100644 --- a/board/freescale/mpc7448hpc2/tsi108_init.c +++ b/board/freescale/mpc7448hpc2/tsi108_init.c @@ -88,7 +88,7 @@ PB2OCN_LUT_ENTRY pb2ocn_lut1[32] = { {0x00000000, 0x00000240} /* PBA=0xFF00_0000 -> HLP : (Translation Enabled + Byte-Swap)*/ }; -#ifdef CFG_CLK_SPREAD +#ifdef CONFIG_SYS_CLK_SPREAD typedef struct { ulong ctrl0; ulong ctrl1; @@ -111,7 +111,7 @@ static PLL_CTRL_SET pll0_config[8] = { {0x005c0044, 0x00000039}, /* 6: CG_PB_CLKO = 200 MHz */ {0x004f0044, 0x0000003e} /* 7: CG_PB_CLKO = 233 MHz */ }; -#endif /* CFG_CLK_SPREAD */ +#endif /* CONFIG_SYS_CLK_SPREAD */ /* * Prosessor Bus Clock (in MHz) defined by CG_PB_SELECT @@ -129,7 +129,7 @@ unsigned long get_board_bus_clk (void) ulong i; /* Detect PB clock freq. */ - i = in32(CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PWRUP_STATUS); + i = in32(CONFIG_SYS_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PWRUP_STATUS); i = (i >> 16) & 0x07; /* Get PB PLL multiplier */ return pb_clk_sel[i] * 1000000; @@ -146,7 +146,7 @@ int board_early_init_f (void) ulong i; gd->mem_clk = 0; - i = in32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + + i = in32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PWRUP_STATUS); i = (i >> 20) & 0x07; /* Get GD PLL multiplier */ switch (i) { @@ -182,7 +182,7 @@ int board_early_init_r (void) volatile ulong *reg_ptr; reg_ptr = - (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + 0x900); + (ulong *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + 0x900); for (i = 0; i < 32; i++) { *reg_ptr++ = 0x00000201; /* SWAP ENABLED */ @@ -194,7 +194,7 @@ int board_early_init_r (void) /* Setup PB_OCN_BAR2: size 256B + ENable @ 0x0_80000000 */ - out32 (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR2, + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR2, 0x80000001); __asm__ __volatile__ ("sync"); @@ -202,7 +202,7 @@ int board_early_init_r (void) * read from SDRAM) */ - temp = in32(CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR2); + temp = in32(CONFIG_SYS_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR2); __asm__ __volatile__ ("sync"); /* @@ -221,7 +221,7 @@ int board_early_init_r (void) * initialize pointer to LUT associated with PB_OCN_BAR1 */ reg_ptr = - (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + 0x800); + (ulong *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + 0x800); for (i = 0; i < 32; i++) { *reg_ptr++ = pb2ocn_lut1[i].lower; @@ -232,73 +232,73 @@ int board_early_init_r (void) /* Base addresses for CS0, CS1, CS2, CS3 */ - out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_ADDR, + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_ADDR, 0x00000000); __asm__ __volatile__ ("sync"); - out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_ADDR, + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_ADDR, 0x00100000); __asm__ __volatile__ ("sync"); - out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_ADDR, + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_ADDR, 0x00200000); __asm__ __volatile__ ("sync"); - out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_ADDR, + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_ADDR, 0x00300000); __asm__ __volatile__ ("sync"); /* Masks for HLP banks */ - out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_MASK, + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_MASK, 0xFFF00000); __asm__ __volatile__ ("sync"); - out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_MASK, + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_MASK, 0xFFF00000); __asm__ __volatile__ ("sync"); - out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_MASK, + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_MASK, 0xFFF00000); __asm__ __volatile__ ("sync"); - out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_MASK, + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_MASK, 0xFFF00000); __asm__ __volatile__ ("sync"); /* Set CTRL0 values for banks */ - out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_CTRL0, + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_CTRL0, 0x7FFC44C2); __asm__ __volatile__ ("sync"); - out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_CTRL0, + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_CTRL0, 0x7FFC44C0); __asm__ __volatile__ ("sync"); - out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_CTRL0, + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_CTRL0, 0x7FFC44C0); __asm__ __volatile__ ("sync"); - out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_CTRL0, + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_CTRL0, 0x7FFC44C2); __asm__ __volatile__ ("sync"); /* Set banks to latched mode, enabled, and other default settings */ - out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_CTRL1, + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_CTRL1, 0x7C0F2000); __asm__ __volatile__ ("sync"); - out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_CTRL1, + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_CTRL1, 0x7C0F2000); __asm__ __volatile__ ("sync"); - out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_CTRL1, + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_CTRL1, 0x7C0F2000); __asm__ __volatile__ ("sync"); - out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_CTRL1, + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_CTRL1, 0x7C0F2000); __asm__ __volatile__ ("sync"); @@ -306,7 +306,7 @@ int board_early_init_r (void) * Set new value for PB_OCN_BAR1: switch from BOOT to LUT mode. * value for PB_OCN_BAR1: (BA-0xE000_0000 + size 512MB + ENable) */ - out32 (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR1, + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR1, 0xE0000011); __asm__ __volatile__ ("sync"); @@ -314,7 +314,7 @@ int board_early_init_r (void) * immediate read from SDRAM) */ - temp = in32(CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR1); + temp = in32(CONFIG_SYS_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR1); __asm__ __volatile__ ("sync"); /* @@ -341,7 +341,7 @@ int board_early_init_r (void) temp = get_cpu_type (); if ((CPU_750FX == temp) || (CPU_750GX == temp)) - out32 (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_MCMD, + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_MCMD, 0x00009955); #endif /* DISABLE_PBM */ @@ -351,27 +351,27 @@ int board_early_init_r (void) */ /* Map PCI/X Configuration Space (16MB @ 0x0_FE000000) */ - out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_BAR0_UPPER, 0); __asm__ __volatile__ ("sync"); - out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_BAR0, + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_BAR0, 0xFB000001); __asm__ __volatile__ ("sync"); /* Set Bus Number for the attached PCI/X bus (we will use 0 for NB) */ - temp = in32(CFG_TSI108_CSR_BASE + + temp = in32(CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PCIX_STAT); temp &= ~0xFF00; /* Clear the BUS_NUM field */ - out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PCIX_STAT, + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PCIX_STAT, temp); /* Map PCI/X IO Space (64KB @ 0x0_FD000000) takes one 16MB LUT entry */ - out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_IO_UPPER, + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_IO_UPPER, 0); __asm__ __volatile__ ("sync"); @@ -379,7 +379,7 @@ int board_early_init_r (void) * and maps it as a IO address. */ - out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_IO, + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_IO, 0x00000001); __asm__ __volatile__ ("sync"); @@ -405,7 +405,7 @@ int board_early_init_r (void) */ reg_ptr = - (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + 0x500); + (ulong *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + 0x500); #ifdef DISABLE_PBM @@ -442,7 +442,7 @@ int board_early_init_r (void) __asm__ __volatile__ ("eieio"); __asm__ __volatile__ ("sync"); - out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_PAGE_SIZES, + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_PAGE_SIZES, reg_val); __asm__ __volatile__ ("sync"); @@ -450,9 +450,9 @@ int board_early_init_r (void) * ( 0 is the best choice for easy mapping) */ - out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR2, + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR2, 0x00000000); - out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR2_UPPER, + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR2_UPPER, 0x00000000); __asm__ __volatile__ ("sync"); @@ -470,7 +470,7 @@ int board_early_init_r (void) * set pointer to LUT associated with PCI P2O_BAR3 */ reg_ptr = - (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + 0x600); + (ulong *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + 0x600); reg_val = 0x00000004; /* Destination port = SDC */ @@ -490,19 +490,19 @@ int board_early_init_r (void) /* Configure PCI P2O_BAR3 (size = 512MB, Enabled) */ reg_val = - in32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + + in32(CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_PAGE_SIZES); reg_val &= ~0x00FF; reg_val |= 0x0071; - out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_PAGE_SIZES, + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_PAGE_SIZES, reg_val); __asm__ __volatile__ ("sync"); /* Set 64-bit base PCI bus address for window (0x20000000) */ - out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR3_UPPER, + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR3_UPPER, 0x00000000); - out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR3, + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR3, 0x20000000); __asm__ __volatile__ ("sync"); @@ -511,17 +511,17 @@ int board_early_init_r (void) #ifdef ENABLE_PCI_CSR_BAR /* open if required access to Tsi108 CSRs from the PCI/X bus */ /* enable BAR0 on the PCI/X bus */ - reg_val = in32(CFG_TSI108_CSR_BASE + + reg_val = in32(CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_MISC_CSR); reg_val |= 0x02; - out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_MISC_CSR, + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_MISC_CSR, reg_val); __asm__ __volatile__ ("sync"); - out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR0_UPPER, + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR0_UPPER, 0x00000000); - out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR0, - CFG_TSI108_CSR_BASE); + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR0, + CONFIG_SYS_TSI108_CSR_BASE); __asm__ __volatile__ ("sync"); #endif @@ -530,9 +530,9 @@ int board_early_init_r (void) * Finally enable PCI/X Bus Master and Memory Space access */ - reg_val = in32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_CSR); + reg_val = in32(CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_CSR); reg_val |= 0x06; - out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_CSR, reg_val); + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_CSR, reg_val); __asm__ __volatile__ ("sync"); #endif /* CONFIG_PCI */ @@ -546,10 +546,10 @@ int board_early_init_r (void) * PB_INT[3] -> MCP (CPU1) * Set interrupt controller outputs as Level_Sensitive/Active_Low */ - out32 (CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(0), 0x02); - out32 (CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(1), 0x02); - out32 (CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(2), 0x02); - out32 (CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(3), 0x02); + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(0), 0x02); + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(1), 0x02); + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(2), 0x02); + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(3), 0x02); __asm__ __volatile__ ("sync"); /* @@ -584,42 +584,42 @@ unsigned long get_l2cr (void) int misc_init_r (void) { -#ifdef CFG_CLK_SPREAD /* Initialize Spread-Spectrum Clock generation */ +#ifdef CONFIG_SYS_CLK_SPREAD /* Initialize Spread-Spectrum Clock generation */ ulong i; /* Ensure that Spread-Spectrum is disabled */ - out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0, 0); - out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0, 0); + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0, 0); + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0, 0); /* Initialize PLL1: CG_PCI_CLK , internal OCN_CLK * Uses pre-calculated value for Fout = 800 MHz, Fs = 30 kHz, D = 0.5% */ - out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0, + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0, 0x002e0044); /* D = 0.25% */ - out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL1, + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL1, 0x00000039); /* BWADJ */ /* Initialize PLL0: CG_PB_CLKO */ /* Detect PB clock freq. */ - i = in32(CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PWRUP_STATUS); + i = in32(CONFIG_SYS_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PWRUP_STATUS); i = (i >> 16) & 0x07; /* Get PB PLL multiplier */ - out32 (CFG_TSI108_CSR_BASE + + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0, pll0_config[i].ctrl0); - out32 (CFG_TSI108_CSR_BASE + + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL1, pll0_config[i].ctrl1); /* Wait and set SSEN for both PLL0 and 1 */ udelay (1000); - out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0, + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0, 0x802e0044); /* D=0.25% */ - out32 (CFG_TSI108_CSR_BASE + + out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0, 0x80000000 | pll0_config[i].ctrl0); -#endif /* CFG_CLK_SPREAD */ +#endif /* CONFIG_SYS_CLK_SPREAD */ -#ifdef CFG_L2 +#ifdef CONFIG_SYS_L2 l2cache_enable (); #endif printf ("BUS: %lu MHz\n", gd->bus_clk / 1000000); diff --git a/board/freescale/mpc7448hpc2/u-boot.lds b/board/freescale/mpc7448hpc2/u-boot.lds index 6b228f7a9..f3f6c544d 100644 --- a/board/freescale/mpc7448hpc2/u-boot.lds +++ b/board/freescale/mpc7448hpc2/u-boot.lds @@ -60,7 +60,7 @@ SECTIONS /* store the environment in a seperate sector in the boot flash */ /* . = env_offset; */ -/* common/environment.o(.text) */ +/* common/env_embedded.o(.text) */ *(.text) *(.fixup) @@ -129,6 +129,7 @@ SECTIONS *(.dynbss) *(.bss) *(COMMON) + . = ALIGN(4); } _end = . ; PROVIDE (end = .); diff --git a/board/freescale/mpc8260ads/flash.c b/board/freescale/mpc8260ads/flash.c index 59997aac4..e03852f68 100644 --- a/board/freescale/mpc8260ads/flash.c +++ b/board/freescale/mpc8260ads/flash.c @@ -52,7 +52,7 @@ #define INTEL_FINISHED 0x80808080 #define INTEL_OK 0x80808080 -flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ +flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ /*----------------------------------------------------------------------- * This board supports 32-bit wide flash SIMMs (4x8-bit configuration.) @@ -66,8 +66,8 @@ unsigned long flash_init (void) ulong size = 0, sect_start, sect_size = 0, bank_size; ushort sect_count = 0; int i, j, nbanks; - vu_long *addr = (vu_long *)CFG_FLASH_BASE; - vu_long *bcsr = (vu_long *)CFG_BCSR; + vu_long *addr = (vu_long *)CONFIG_SYS_FLASH_BASE; + vu_long *bcsr = (vu_long *)CONFIG_SYS_BCSR; switch (bcsr[2] & 0xF) { case 0: @@ -80,11 +80,11 @@ unsigned long flash_init (void) nbanks = 1; break; default: /* Unsupported configurations */ - nbanks = CFG_MAX_FLASH_BANKS; + nbanks = CONFIG_SYS_MAX_FLASH_BANKS; } - if (nbanks > CFG_MAX_FLASH_BANKS) - nbanks = CFG_MAX_FLASH_BANKS; + if (nbanks > CONFIG_SYS_MAX_FLASH_BANKS) + nbanks = CONFIG_SYS_MAX_FLASH_BANKS; for (i = 0; i < nbanks; i++) { *addr = INTEL_READID; /* Read Intelligent Identifier */ @@ -98,9 +98,9 @@ unsigned long flash_init (void) break; default: flash_info[i].flash_id = FLASH_UNKNOWN; - sect_count = CFG_MAX_FLASH_SECT; + sect_count = CONFIG_SYS_MAX_FLASH_SECT; sect_size = - CFG_FLASH_SIZE / CFG_MAX_FLASH_BANKS / CFG_MAX_FLASH_SECT; + CONFIG_SYS_FLASH_SIZE / CONFIG_SYS_MAX_FLASH_BANKS / CONFIG_SYS_MAX_FLASH_SECT; } } else @@ -127,10 +127,10 @@ unsigned long flash_init (void) } if (size == 0) { /* Unknown flash, fill with hard-coded values */ - sect_start = CFG_FLASH_BASE; - for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { + sect_start = CONFIG_SYS_FLASH_BASE; + for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { flash_info[i].flash_id = FLASH_UNKNOWN; - flash_info[i].size = CFG_FLASH_SIZE / CFG_MAX_FLASH_BANKS; + flash_info[i].size = CONFIG_SYS_FLASH_SIZE / CONFIG_SYS_MAX_FLASH_BANKS; flash_info[i].sector_count = sect_count; for (j = 0; j < sect_count; j++) { flash_info[i].start[j] = sect_start; @@ -138,28 +138,28 @@ unsigned long flash_init (void) sect_start += sect_size; } } - size = CFG_FLASH_SIZE; + size = CONFIG_SYS_FLASH_SIZE; } else - for (i = nbanks; i < CFG_MAX_FLASH_BANKS; i++) { + for (i = nbanks; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { flash_info[i].flash_id = FLASH_UNKNOWN; flash_info[i].size = 0; flash_info[i].sector_count = 0; } -#if CFG_MONITOR_BASE >= CFG_FLASH_BASE +#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE /* monitor protection ON by default */ flash_protect(FLAG_PROTECT_SET, - CFG_MONITOR_BASE, - CFG_MONITOR_BASE+monitor_flash_len-1, + CONFIG_SYS_MONITOR_BASE, + CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, &flash_info[0]); #endif -#ifdef CFG_ENV_IS_IN_FLASH +#ifdef CONFIG_ENV_IS_IN_FLASH /* ENV protection ON by default */ flash_protect(FLAG_PROTECT_SET, - CFG_ENV_ADDR, - CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1, + CONFIG_ENV_ADDR, + CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1, &flash_info[0]); #endif return (size); @@ -274,7 +274,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) enable_interrupts(); while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) { - if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) { + if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout\n"); *addr = INTEL_RESET; /* reset bank */ return 1; @@ -338,7 +338,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data) /* data polling for D7 */ start = get_timer (0); while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) { - if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { printf("Write timed out\n"); rc = 1; break; @@ -454,7 +454,7 @@ int flash_real_protect(flash_info_t *info, long sector, int prot) start = get_timer(0); while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) { - if (get_timer(start) > CFG_FLASH_UNLOCK_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_UNLOCK_TOUT) { printf("Flash lock bit operation timed out\n"); rc = 1; break; @@ -480,7 +480,7 @@ int flash_real_protect(flash_info_t *info, long sector, int prot) addr = (vu_long *)(info->start[i]); *addr = INTEL_LOCKBIT; /* Sector lock bit */ *addr = INTEL_PROTECT; /* set */ - udelay(CFG_FLASH_LOCK_TOUT * 1000); + udelay(CONFIG_SYS_FLASH_LOCK_TOUT * 1000); } if (flag) diff --git a/board/freescale/mpc8260ads/mpc8260ads.c b/board/freescale/mpc8260ads/mpc8260ads.c index 8ab7d356c..49a88bbdd 100644 --- a/board/freescale/mpc8260ads/mpc8260ads.c +++ b/board/freescale/mpc8260ads/mpc8260ads.c @@ -58,32 +58,32 @@ * according to the five values podr/pdir/ppar/psor/pdat for that entry */ -#define CFG_FCC1 (CONFIG_ETHER_INDEX == 1) -#define CFG_FCC2 (CONFIG_ETHER_INDEX == 2) -#define CFG_FCC3 (CONFIG_ETHER_INDEX == 3) +#define CONFIG_SYS_FCC1 (CONFIG_ETHER_INDEX == 1) +#define CONFIG_SYS_FCC2 (CONFIG_ETHER_INDEX == 2) +#define CONFIG_SYS_FCC3 (CONFIG_ETHER_INDEX == 3) const iop_conf_t iop_conf_tab[4][32] = { /* Port A configuration */ { /* conf ppar psor pdir podr pdat */ - /* PA31 */ { CFG_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII COL */ - /* PA30 */ { CFG_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII CRS */ - /* PA29 */ { CFG_FCC1, 1, 1, 1, 0, 0 }, /* FCC1 MII TX_ER */ - /* PA28 */ { CFG_FCC1, 1, 1, 1, 0, 0 }, /* FCC1 MII TX_EN */ - /* PA27 */ { CFG_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII RX_DV */ - /* PA26 */ { CFG_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII RX_ER */ + /* PA31 */ { CONFIG_SYS_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII COL */ + /* PA30 */ { CONFIG_SYS_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII CRS */ + /* PA29 */ { CONFIG_SYS_FCC1, 1, 1, 1, 0, 0 }, /* FCC1 MII TX_ER */ + /* PA28 */ { CONFIG_SYS_FCC1, 1, 1, 1, 0, 0 }, /* FCC1 MII TX_EN */ + /* PA27 */ { CONFIG_SYS_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII RX_DV */ + /* PA26 */ { CONFIG_SYS_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII RX_ER */ /* PA25 */ { 0, 0, 0, 0, 0, 0 }, /* PA25 */ /* PA24 */ { 0, 0, 0, 0, 0, 0 }, /* PA24 */ /* PA23 */ { 0, 0, 0, 0, 0, 0 }, /* PA23 */ /* PA22 */ { 0, 0, 0, 0, 0, 0 }, /* PA22 */ - /* PA21 */ { CFG_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[3] */ - /* PA20 */ { CFG_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[2] */ - /* PA19 */ { CFG_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[1] */ - /* PA18 */ { CFG_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[0] */ - /* PA17 */ { CFG_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[0] */ - /* PA16 */ { CFG_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[1] */ - /* PA15 */ { CFG_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[2] */ - /* PA14 */ { CFG_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[3] */ + /* PA21 */ { CONFIG_SYS_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[3] */ + /* PA20 */ { CONFIG_SYS_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[2] */ + /* PA19 */ { CONFIG_SYS_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[1] */ + /* PA18 */ { CONFIG_SYS_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[0] */ + /* PA17 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[0] */ + /* PA16 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[1] */ + /* PA15 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[2] */ + /* PA14 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[3] */ /* PA13 */ { 0, 0, 0, 0, 0, 0 }, /* PA13 */ /* PA12 */ { 0, 0, 0, 0, 0, 0 }, /* PA12 */ /* PA11 */ { 0, 0, 0, 0, 0, 0 }, /* PA11 */ @@ -102,34 +102,34 @@ const iop_conf_t iop_conf_tab[4][32] = { /* Port B configuration */ { /* conf ppar psor pdir podr pdat */ - /* PB31 */ { CFG_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */ - /* PB30 */ { CFG_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */ - /* PB29 */ { CFG_FCC2, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */ - /* PB28 */ { CFG_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */ - /* PB27 */ { CFG_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */ - /* PB26 */ { CFG_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */ - /* PB25 */ { CFG_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */ - /* PB24 */ { CFG_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */ - /* PB23 */ { CFG_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */ - /* PB22 */ { CFG_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */ - /* PB21 */ { CFG_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */ - /* PB20 */ { CFG_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */ - /* PB19 */ { CFG_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */ - /* PB18 */ { CFG_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */ - /* PB17 */ { CFG_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RX_DIV */ - /* PB16 */ { CFG_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RX_ERR */ - /* PB15 */ { CFG_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TX_ERR */ - /* PB14 */ { CFG_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TX_EN */ - /* PB13 */ { CFG_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:COL */ - /* PB12 */ { CFG_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:CRS */ - /* PB11 */ { CFG_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ - /* PB10 */ { CFG_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ - /* PB9 */ { CFG_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ - /* PB8 */ { CFG_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ - /* PB7 */ { CFG_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ - /* PB6 */ { CFG_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ - /* PB5 */ { CFG_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ - /* PB4 */ { CFG_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ + /* PB31 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */ + /* PB30 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */ + /* PB29 */ { CONFIG_SYS_FCC2, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */ + /* PB28 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */ + /* PB27 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */ + /* PB26 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */ + /* PB25 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */ + /* PB24 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */ + /* PB23 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */ + /* PB22 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */ + /* PB21 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */ + /* PB20 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */ + /* PB19 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */ + /* PB18 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */ + /* PB17 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RX_DIV */ + /* PB16 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RX_ERR */ + /* PB15 */ { CONFIG_SYS_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TX_ERR */ + /* PB14 */ { CONFIG_SYS_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TX_EN */ + /* PB13 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:COL */ + /* PB12 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:CRS */ + /* PB11 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ + /* PB10 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ + /* PB9 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ + /* PB8 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ + /* PB7 */ { CONFIG_SYS_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ + /* PB6 */ { CONFIG_SYS_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ + /* PB5 */ { CONFIG_SYS_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ + /* PB4 */ { CONFIG_SYS_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ @@ -147,32 +147,32 @@ const iop_conf_t iop_conf_tab[4][32] = { /* PC25 */ { 0, 0, 0, 0, 0, 0 }, /* PC25 */ /* PC24 */ { 0, 0, 0, 0, 0, 0 }, /* PC24 */ /* PC23 */ { 0, 0, 0, 0, 0, 0 }, /* PC23 */ - /* PC22 */ { CFG_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII Tx Clock (CLK10) */ - /* PC21 */ { CFG_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII Rx Clock (CLK11) */ + /* PC22 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII Tx Clock (CLK10) */ + /* PC21 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII Rx Clock (CLK11) */ /* PC20 */ { 0, 0, 0, 0, 0, 0 }, /* PC20 */ -#if CONFIG_ADSTYPE == CFG_8272ADS +#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS /* PC19 */ { 1, 0, 0, 1, 0, 0 }, /* FETHMDC */ /* PC18 */ { 1, 0, 0, 0, 0, 0 }, /* FETHMDIO */ - /* PC17 */ { CFG_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII Rx Clock (CLK15) */ - /* PC16 */ { CFG_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII Tx Clock (CLK16) */ + /* PC17 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII Rx Clock (CLK15) */ + /* PC16 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII Tx Clock (CLK16) */ #else - /* PC19 */ { CFG_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII Rx Clock (CLK13) */ - /* PC18 */ { CFG_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII Tx Clock (CLK14) */ + /* PC19 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII Rx Clock (CLK13) */ + /* PC18 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII Tx Clock (CLK14) */ /* PC17 */ { 0, 0, 0, 0, 0, 0 }, /* PC17 */ /* PC16 */ { 0, 0, 0, 0, 0, 0 }, /* PC16 */ -#endif /* CONFIG_ADSTYPE == CFG_8272ADS */ +#endif /* CONFIG_ADSTYPE == CONFIG_SYS_8272ADS */ /* PC15 */ { 0, 0, 0, 0, 0, 0 }, /* PC15 */ /* PC14 */ { 0, 0, 0, 0, 0, 0 }, /* PC14 */ /* PC13 */ { 0, 0, 0, 0, 0, 0 }, /* PC13 */ /* PC12 */ { 0, 0, 0, 0, 0, 0 }, /* PC12 */ /* PC11 */ { 0, 0, 0, 0, 0, 0 }, /* PC11 */ -#if CONFIG_ADSTYPE == CFG_8272ADS +#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS /* PC10 */ { 0, 0, 0, 0, 0, 0 }, /* PC10 */ /* PC9 */ { 0, 0, 0, 0, 0, 0 }, /* PC9 */ #else /* PC10 */ { 1, 0, 0, 1, 0, 0 }, /* FETHMDC */ /* PC9 */ { 1, 0, 0, 0, 0, 0 }, /* FETHMDIO */ -#endif /* CONFIG_ADSTYPE == CFG_8272ADS */ +#endif /* CONFIG_ADSTYPE == CONFIG_SYS_8272ADS */ /* PC8 */ { 0, 0, 0, 0, 0, 0 }, /* PC8 */ /* PC7 */ { 0, 0, 0, 0, 0, 0 }, /* PC7 */ /* PC6 */ { 0, 0, 0, 0, 0, 0 }, /* PC6 */ @@ -223,10 +223,10 @@ const iop_conf_t iop_conf_tab[4][32] = { void reset_phy (void) { - vu_long *bcsr = (vu_long *)CFG_BCSR; + vu_long *bcsr = (vu_long *)CONFIG_SYS_BCSR; /* Reset the PHY */ -#if CFG_PHY_ADDR == 0 +#if CONFIG_SYS_PHY_ADDR == 0 bcsr[1] &= ~(FETHIEN1 | FETH1_RST); udelay(2); bcsr[1] |= FETH1_RST; @@ -234,16 +234,16 @@ void reset_phy (void) bcsr[3] &= ~(FETHIEN2 | FETH2_RST); udelay(2); bcsr[3] |= FETH2_RST; -#endif /* CFG_PHY_ADDR == 0 */ +#endif /* CONFIG_SYS_PHY_ADDR == 0 */ udelay(1000); #ifdef CONFIG_MII -#if CONFIG_ADSTYPE >= CFG_PQ2FADS +#if CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS /* * Do not bypass Rx/Tx (de)scrambler (fix configuration error) * Enable autonegotiation. */ - bb_miiphy_write(NULL, CFG_PHY_ADDR, 16, 0x610); - bb_miiphy_write(NULL, CFG_PHY_ADDR, PHY_BMCR, + bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, 16, 0x610); + bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG); #else /* @@ -254,14 +254,14 @@ void reset_phy (void) */ /* Advertise all capabilities */ - bb_miiphy_write(NULL, CFG_PHY_ADDR, PHY_ANAR, 0x01E1); + bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, PHY_ANAR, 0x01E1); /* Do not bypass Rx/Tx (de)scrambler */ - bb_miiphy_write(NULL, CFG_PHY_ADDR, PHY_DCR, 0x0000); + bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, PHY_DCR, 0x0000); - bb_miiphy_write(NULL, CFG_PHY_ADDR, PHY_BMCR, + bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG); -#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */ +#endif /* CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS */ #endif /* CONFIG_MII */ } @@ -274,10 +274,10 @@ typedef struct pci_ic_s { int board_early_init_f (void) { - vu_long *bcsr = (vu_long *)CFG_BCSR; + vu_long *bcsr = (vu_long *)CONFIG_SYS_BCSR; #ifdef CONFIG_PCI - volatile pci_ic_t* pci_ic = (pci_ic_t *) CFG_PCI_INT; + volatile pci_ic_t* pci_ic = (pci_ic_t *) CONFIG_SYS_PCI_INT; /* mask alll the PCI interrupts */ pci_ic->pci_int_mask |= 0xfff00000; @@ -289,19 +289,19 @@ int board_early_init_f (void) bcsr[1] &= ~RS232EN_2; #endif -#if CONFIG_ADSTYPE != CFG_8260ADS /* PCI mode can be selected */ -#if CONFIG_ADSTYPE == CFG_PQ2FADS +#if CONFIG_ADSTYPE != CONFIG_SYS_8260ADS /* PCI mode can be selected */ +#if CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS if ((bcsr[3] & BCSR_PCI_MODE) == 0) /* PCI mode selected by JP9 */ -#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */ +#endif /* CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS */ { - volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; immap->im_clkrst.car_sccr |= M826X_SCCR_PCI_MODE_EN; immap->im_siu_conf.sc_siumcr = (immap->im_siu_conf.sc_siumcr & ~SIUMCR_LBPC11) | SIUMCR_LBPC01; } -#endif /* CONFIG_ADSTYPE != CFG_8260ADS */ +#endif /* CONFIG_ADSTYPE != CONFIG_SYS_8260ADS */ return 0; } @@ -310,16 +310,16 @@ int board_early_init_f (void) phys_size_t initdram (int board_type) { -#if CONFIG_ADSTYPE == CFG_PQ2FADS +#if CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS long int msize = 32; -#elif CONFIG_ADSTYPE == CFG_8272ADS +#elif CONFIG_ADSTYPE == CONFIG_SYS_8272ADS long int msize = 64; #else long int msize = 16; #endif -#ifndef CFG_RAMBOOT - volatile immap_t *immap = (immap_t *) CFG_IMMR; +#ifndef CONFIG_SYS_RAMBOOT + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile memctl8260_t *memctl = &immap->im_memctl; volatile uchar *ramaddr, c = 0xff; uint or; @@ -332,33 +332,33 @@ phys_size_t initdram (int board_type) immap->im_siu_conf.sc_ppc_alrh = 0x01267893; immap->im_siu_conf.sc_tescr1 = 0x00004000; - memctl->memc_mptpr = CFG_MPTPR; -#ifdef CFG_LSDRAM_BASE + memctl->memc_mptpr = CONFIG_SYS_MPTPR; +#ifdef CONFIG_SYS_LSDRAM_BASE /* Initialise local bus SDRAM only if the pins are configured as local bus pins and not as PCI. The configuration is determined by the HRCW. */ if ((immap->im_siu_conf.sc_siumcr & SIUMCR_LBPC11) == SIUMCR_LBPC00) { - memctl->memc_lsrt = CFG_LSRT; -#if CONFIG_ADSTYPE == CFG_PQ2FADS /* CS3 */ + memctl->memc_lsrt = CONFIG_SYS_LSRT; +#if CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS /* CS3 */ memctl->memc_or3 = 0xFF803280; - memctl->memc_br3 = CFG_LSDRAM_BASE | 0x00001861; + memctl->memc_br3 = CONFIG_SYS_LSDRAM_BASE | 0x00001861; #else /* CS4 */ memctl->memc_or4 = 0xFFC01480; - memctl->memc_br4 = CFG_LSDRAM_BASE | 0x00001861; -#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */ - memctl->memc_lsdmr = CFG_LSDMR | 0x28000000; - ramaddr = (uchar *) CFG_LSDRAM_BASE; + memctl->memc_br4 = CONFIG_SYS_LSDRAM_BASE | 0x00001861; +#endif /* CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS */ + memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x28000000; + ramaddr = (uchar *) CONFIG_SYS_LSDRAM_BASE; *ramaddr = c; - memctl->memc_lsdmr = CFG_LSDMR | 0x08000000; + memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x08000000; for (i = 0; i < 8; i++) *ramaddr = c; - memctl->memc_lsdmr = CFG_LSDMR | 0x18000000; + memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x18000000; *ramaddr = c; - memctl->memc_lsdmr = CFG_LSDMR | 0x40000000; + memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x40000000; } -#endif /* CFG_LSDRAM_BASE */ +#endif /* CONFIG_SYS_LSDRAM_BASE */ /* Init 60x bus SDRAM */ #ifdef CONFIG_SPD_EEPROM @@ -498,14 +498,14 @@ phys_size_t initdram (int board_type) #endif /* SPD_DEBUG */ } #else /* !CONFIG_SPD_EEPROM */ - or = CFG_OR2; - psdmr = CFG_PSDMR; - psrt = CFG_PSRT; + or = CONFIG_SYS_OR2; + psdmr = CONFIG_SYS_PSDMR; + psrt = CONFIG_SYS_PSRT; #endif /* CONFIG_SPD_EEPROM */ memctl->memc_psrt = psrt; memctl->memc_or2 = or; - memctl->memc_br2 = CFG_SDRAM_BASE | 0x00000041; - ramaddr = (uchar *) CFG_SDRAM_BASE; + memctl->memc_br2 = CONFIG_SYS_SDRAM_BASE | 0x00000041; + ramaddr = (uchar *) CONFIG_SYS_SDRAM_BASE; memctl->memc_psdmr = psdmr | 0x28000000; /* Precharge all banks */ *ramaddr = c; memctl->memc_psdmr = psdmr | 0x08000000; /* CBR refresh */ @@ -516,7 +516,7 @@ phys_size_t initdram (int board_type) *ramaddr = c; memctl->memc_psdmr = psdmr | 0x40000000; /* Refresh enable */ *ramaddr = c; -#endif /* CFG_RAMBOOT */ +#endif /* CONFIG_SYS_RAMBOOT */ /* return total 60x bus SDRAM size */ return (msize * 1024 * 1024); @@ -524,13 +524,13 @@ phys_size_t initdram (int board_type) int checkboard (void) { -#if CONFIG_ADSTYPE == CFG_8260ADS +#if CONFIG_ADSTYPE == CONFIG_SYS_8260ADS puts ("Board: Motorola MPC8260ADS\n"); -#elif CONFIG_ADSTYPE == CFG_8266ADS +#elif CONFIG_ADSTYPE == CONFIG_SYS_8266ADS puts ("Board: Motorola MPC8266ADS\n"); -#elif CONFIG_ADSTYPE == CFG_PQ2FADS +#elif CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS puts ("Board: Motorola PQ2FADS-ZU\n"); -#elif CONFIG_ADSTYPE == CFG_8272ADS +#elif CONFIG_ADSTYPE == CONFIG_SYS_8272ADS puts ("Board: Motorola MPC8272ADS\n"); #else puts ("Board: unknown\n"); diff --git a/board/freescale/mpc8266ads/flash.c b/board/freescale/mpc8266ads/flash.c index 9512c72a0..06dde36e6 100644 --- a/board/freescale/mpc8266ads/flash.c +++ b/board/freescale/mpc8266ads/flash.c @@ -29,17 +29,17 @@ #include <common.h> -flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ +flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ -#if defined(CFG_ENV_IS_IN_FLASH) -# ifndef CFG_ENV_ADDR -# define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET) +#if defined(CONFIG_ENV_IS_IN_FLASH) +# ifndef CONFIG_ENV_ADDR +# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) # endif -# ifndef CFG_ENV_SIZE -# define CFG_ENV_SIZE CFG_ENV_SECT_SIZE +# ifndef CONFIG_ENV_SIZE +# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE # endif -# ifndef CFG_ENV_SECT_SIZE -# define CFG_ENV_SECT_SIZE CFG_ENV_SIZE +# ifndef CONFIG_ENV_SECT_SIZE +# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE # endif #endif @@ -56,7 +56,7 @@ static int clear_block_lock_bit(vu_long * addr); unsigned long flash_init (void) { #ifndef CONFIG_MPC8266ADS - volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; volatile ip860_bcsr_t *bcsr = (ip860_bcsr_t *)BCSR_BASE; #endif @@ -71,7 +71,7 @@ unsigned long flash_init (void) #endif - for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) { + for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) { flash_info[i].flash_id = FLASH_UNKNOWN; /* set the default sector offset */ @@ -88,28 +88,28 @@ unsigned long flash_init (void) #ifndef CONFIG_MPC8266ADS /* Remap FLASH according to real size */ - memctl->memc_or1 = CFG_OR_TIMING_FLASH | (-size & 0xFFFF8000); - memctl->memc_br1 = (CFG_FLASH_BASE & BR_BA_MSK) | + memctl->memc_or1 = CONFIG_SYS_OR_TIMING_FLASH | (-size & 0xFFFF8000); + memctl->memc_br1 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | (memctl->memc_br1 & ~(BR_BA_MSK)); #endif /* Re-do sizing to get full correct info */ - size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]); + size = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]); flash_info[0].size = size; -#if CFG_MONITOR_BASE >= CFG_FLASH_BASE +#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE /* monitor protection ON by default */ flash_protect(FLAG_PROTECT_SET, - CFG_MONITOR_BASE, - CFG_MONITOR_BASE+monitor_flash_len-1, + CONFIG_SYS_MONITOR_BASE, + CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, &flash_info[0]); #endif -#ifdef CFG_ENV_IS_IN_FLASH +#ifdef CONFIG_ENV_IS_IN_FLASH /* ENV protection ON by default */ flash_protect(FLAG_PROTECT_SET, - CFG_ENV_ADDR, - CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1, + CONFIG_ENV_ADDR, + CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1, &flash_info[0]); #endif return (size); @@ -336,7 +336,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) *addr = 0xFFFFFFFF; /* reset bank */ return 1; } - if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) { + if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout\n"); *addr = 0xFFFFFFFF; /* reset bank */ return 1; @@ -461,7 +461,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data) start = get_timer (0); flag = 0; while (((csr = *addr) & 0x80808080) != 0x80808080) { - if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { flag = 1; break; } @@ -499,7 +499,7 @@ static int clear_block_lock_bit(vu_long * addr) start = get_timer (0); while(*addr != 0x80808080){ - if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) { + if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout on clearing Block Lock Bit\n"); *addr = 0xFFFFFFFF; /* reset bank */ return 1; diff --git a/board/freescale/mpc8266ads/mpc8266ads.c b/board/freescale/mpc8266ads/mpc8266ads.c index 090a53413..66acc41e9 100644 --- a/board/freescale/mpc8266ads/mpc8266ads.c +++ b/board/freescale/mpc8266ads/mpc8266ads.c @@ -224,7 +224,7 @@ typedef struct pci_ic_s { void reset_phy(void) { - volatile bcsr_t *bcsr = (bcsr_t *)CFG_BCSR; + volatile bcsr_t *bcsr = (bcsr_t *)CONFIG_SYS_BCSR; /* reset the FEC port */ bcsr->bcsr1 &= ~FETH_RST; @@ -234,8 +234,8 @@ void reset_phy(void) int board_early_init_f (void) { - volatile bcsr_t *bcsr = (bcsr_t *)CFG_BCSR; - volatile pci_ic_t *pci_ic = (pci_ic_t *) CFG_PCI_INT; + volatile bcsr_t *bcsr = (bcsr_t *)CONFIG_SYS_BCSR; + volatile pci_ic_t *pci_ic = (pci_ic_t *) CONFIG_SYS_PCI_INT; bcsr->bcsr1 = ~FETHIEN & ~RS232EN_1 & ~RS232EN_2; @@ -254,17 +254,17 @@ int checkboard(void) phys_size_t initdram(int board_type) { /* Autoinit part stolen from board/sacsng/sacsng.c */ - volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; volatile memctl8260_t *memctl = &immap->im_memctl; volatile uchar c = 0xff; - volatile uchar *ramaddr = (uchar *)(CFG_SDRAM_BASE + 0x8); - uint psdmr = CFG_PSDMR; + volatile uchar *ramaddr = (uchar *)(CONFIG_SYS_SDRAM_BASE + 0x8); + uint psdmr = CONFIG_SYS_PSDMR; int i; uint psrt = 0x21; /* for no SPD */ uint chipselects = 1; /* for no SPD */ - uint sdram_size = CFG_SDRAM_SIZE * 1024 * 1024; /* for no SPD */ - uint or = CFG_OR2_PRELIM; /* for no SPD */ + uint sdram_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; /* for no SPD */ + uint or = CONFIG_SYS_OR2_PRELIM; /* for no SPD */ uint data_width; uint rows; uint banks; @@ -286,7 +286,7 @@ phys_size_t initdram(int board_type) /* * Read the SDRAM SPD EEPROM via I2C. */ - i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE); + i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); i2c_read(SDRAM_SPD_ADDR, 0, 1, &data, 1); spd_size = data; @@ -506,13 +506,13 @@ phys_size_t initdram(int board_type) * accessing the SDRAM with a single-byte transaction." * * The appropriate BRx/ORx registers have already been set when we - * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE. + * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE. */ - memctl->memc_mptpr = CFG_MPTPR; + memctl->memc_mptpr = CONFIG_SYS_MPTPR; memctl->memc_psrt = psrt; - memctl->memc_br2 = CFG_BR2_PRELIM; + memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM; memctl->memc_or2 = or; memctl->memc_psdmr = psdmr | PSDMR_OP_PREA; @@ -536,7 +536,7 @@ phys_size_t initdram(int board_type) { ramaddr += sdram_size; - memctl->memc_br3 = CFG_BR3_PRELIM + sdram_size; + memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM + sdram_size; memctl->memc_or3 = or; memctl->memc_psdmr = psdmr | PSDMR_OP_PREA; diff --git a/board/freescale/mpc8313erdb/mpc8313erdb.c b/board/freescale/mpc8313erdb/mpc8313erdb.c index ebb703d3e..9ffd4bff8 100644 --- a/board/freescale/mpc8313erdb/mpc8313erdb.c +++ b/board/freescale/mpc8313erdb/mpc8313erdb.c @@ -36,8 +36,8 @@ DECLARE_GLOBAL_DATA_PTR; int board_early_init_f(void) { -#ifndef CFG_8313ERDB_BROKEN_PMC - volatile immap_t *im = (immap_t *)CFG_IMMR; +#ifndef CONFIG_SYS_8313ERDB_BROKEN_PMC + volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; if (im->pmc.pmccr1 & PMCCR1_POWER_OFF) gd->flags |= GD_FLG_SILENT; @@ -55,28 +55,28 @@ int checkboard(void) #ifndef CONFIG_NAND_SPL static struct pci_region pci_regions[] = { { - bus_start: CFG_PCI1_MEM_BASE, - phys_start: CFG_PCI1_MEM_PHYS, - size: CFG_PCI1_MEM_SIZE, + bus_start: CONFIG_SYS_PCI1_MEM_BASE, + phys_start: CONFIG_SYS_PCI1_MEM_PHYS, + size: CONFIG_SYS_PCI1_MEM_SIZE, flags: PCI_REGION_MEM | PCI_REGION_PREFETCH }, { - bus_start: CFG_PCI1_MMIO_BASE, - phys_start: CFG_PCI1_MMIO_PHYS, - size: CFG_PCI1_MMIO_SIZE, + bus_start: CONFIG_SYS_PCI1_MMIO_BASE, + phys_start: CONFIG_SYS_PCI1_MMIO_PHYS, + size: CONFIG_SYS_PCI1_MMIO_SIZE, flags: PCI_REGION_MEM }, { - bus_start: CFG_PCI1_IO_BASE, - phys_start: CFG_PCI1_IO_PHYS, - size: CFG_PCI1_IO_SIZE, + bus_start: CONFIG_SYS_PCI1_IO_BASE, + phys_start: CONFIG_SYS_PCI1_IO_PHYS, + size: CONFIG_SYS_PCI1_IO_SIZE, flags: PCI_REGION_IO } }; void pci_init_board(void) { - volatile immap_t *immr = (volatile immap_t *)CFG_IMMR; + volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR; volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk; volatile law83xx_t *pci_law = immr->sysconf.pcilaw; struct pci_region *reg[] = { pci_regions }; @@ -88,14 +88,14 @@ void pci_init_board(void) /* * Configure PCI Local Access Windows */ - pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR; + pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR; pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB; - pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR; + pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR; pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB; warmboot = gd->bd->bi_bootflags & BOOTFLAG_WARM; -#ifndef CFG_8313ERDB_BROKEN_PMC +#ifndef CONFIG_SYS_8313ERDB_BROKEN_PMC warmboot |= immr->pmc.pmccr1 & PMCCR1_POWER_OFF; #endif @@ -135,13 +135,13 @@ void ft_board_setup(void *blob, bd_t *bd) void board_init_f(ulong bootflag) { board_early_init_f(); - NS16550_init((NS16550_t)(CFG_IMMR + 0x4500), - CFG_NS16550_CLK / 16 / CONFIG_BAUDRATE); + NS16550_init((NS16550_t)(CONFIG_SYS_IMMR + 0x4500), + CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE); puts("NAND boot... "); init_timebase(); initdram(0); - relocate_code(CFG_NAND_U_BOOT_RELOC + 0x10000, (gd_t *)gd, - CFG_NAND_U_BOOT_RELOC); + relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000, (gd_t *)gd, + CONFIG_SYS_NAND_U_BOOT_RELOC); } void board_init_r(gd_t *gd, ulong dest_addr) @@ -155,8 +155,8 @@ void putc(char c) return; if (c == '\n') - NS16550_putc((NS16550_t)(CFG_IMMR + 0x4500), '\r'); + NS16550_putc((NS16550_t)(CONFIG_SYS_IMMR + 0x4500), '\r'); - NS16550_putc((NS16550_t)(CFG_IMMR + 0x4500), c); + NS16550_putc((NS16550_t)(CONFIG_SYS_IMMR + 0x4500), c); } #endif diff --git a/board/freescale/mpc8313erdb/sdram.c b/board/freescale/mpc8313erdb/sdram.c index 3a6347fe1..cb138296b 100644 --- a/board/freescale/mpc8313erdb/sdram.c +++ b/board/freescale/mpc8313erdb/sdram.c @@ -35,7 +35,7 @@ DECLARE_GLOBAL_DATA_PTR; -#ifndef CFG_8313ERDB_BROKEN_PMC +#ifndef CONFIG_SYS_8313ERDB_BROKEN_PMC static void resume_from_sleep(void) { u32 magic = *(u32 *)0; @@ -58,15 +58,15 @@ static void resume_from_sleep(void) */ static long fixed_sdram(void) { - u32 msize = CFG_DDR_SIZE * 1024 * 1024; + u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024; -#ifndef CFG_RAMBOOT - volatile immap_t *im = (volatile immap_t *)CFG_IMMR; +#ifndef CONFIG_SYS_RAMBOOT + volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR; u32 msize_log2 = __ilog2(msize); - im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE >> 12; + im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000; im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1); - im->sysconf.ddrcdr = CFG_DDRCDR_VALUE; + im->sysconf.ddrcdr = CONFIG_SYS_DDRCDR_VALUE; /* * Erratum DDR3 requires a 50ms delay after clearing DDRCDR[DDR_cfg], @@ -75,29 +75,29 @@ static long fixed_sdram(void) udelay(50000); im->ddr.csbnds[0].csbnds = (msize - 1) >> 24; - im->ddr.cs_config[0] = CFG_DDR_CONFIG; + im->ddr.cs_config[0] = CONFIG_SYS_DDR_CONFIG; /* Currently we use only one CS, so disable the other bank. */ im->ddr.cs_config[1] = 0; - im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL; - im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3; - im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; - im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; - im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0; + im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL; + im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3; + im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; + im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0; -#ifndef CFG_8313ERDB_BROKEN_PMC +#ifndef CONFIG_SYS_8313ERDB_BROKEN_PMC if (im->pmc.pmccr1 & PMCCR1_POWER_OFF) - im->ddr.sdram_cfg = CFG_SDRAM_CFG | SDRAM_CFG_BI; + im->ddr.sdram_cfg = CONFIG_SYS_SDRAM_CFG | SDRAM_CFG_BI; else #endif - im->ddr.sdram_cfg = CFG_SDRAM_CFG; + im->ddr.sdram_cfg = CONFIG_SYS_SDRAM_CFG; - im->ddr.sdram_cfg2 = CFG_SDRAM_CFG2; - im->ddr.sdram_mode = CFG_DDR_MODE; - im->ddr.sdram_mode2 = CFG_DDR_MODE_2; + im->ddr.sdram_cfg2 = CONFIG_SYS_SDRAM_CFG2; + im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE; + im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE_2; - im->ddr.sdram_interval = CFG_DDR_INTERVAL; + im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL; sync(); /* enable DDR controller */ @@ -109,8 +109,8 @@ static long fixed_sdram(void) phys_size_t initdram(int board_type) { - volatile immap_t *im = (volatile immap_t *)CFG_IMMR; - volatile lbus83xx_t *lbc = &im->lbus; + volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR; + volatile fsl_lbus_t *lbc = &im->lbus; u32 msize; if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) @@ -120,11 +120,11 @@ phys_size_t initdram(int board_type) msize = fixed_sdram(); /* Local Bus setup lbcr and mrtpr */ - lbc->lbcr = CFG_LBC_LBCR; - lbc->mrtpr = CFG_LBC_MRTPR; + lbc->lbcr = CONFIG_SYS_LBC_LBCR; + lbc->mrtpr = CONFIG_SYS_LBC_MRTPR; sync(); -#ifndef CFG_8313ERDB_BROKEN_PMC +#ifndef CONFIG_SYS_8313ERDB_BROKEN_PMC if (im->pmc.pmccr1 & PMCCR1_POWER_OFF) resume_from_sleep(); #endif diff --git a/board/freescale/mpc8315erdb/mpc8315erdb.c b/board/freescale/mpc8315erdb/mpc8315erdb.c index 3eecee251..ea4b04fd3 100644 --- a/board/freescale/mpc8315erdb/mpc8315erdb.c +++ b/board/freescale/mpc8315erdb/mpc8315erdb.c @@ -29,12 +29,13 @@ #include <fdt_support.h> #include <pci.h> #include <mpc83xx.h> +#include <netdev.h> DECLARE_GLOBAL_DATA_PTR; int board_early_init_f(void) { - volatile immap_t *im = (immap_t *)CFG_IMMR; + volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; if (im->pmc.pmccr1 & PMCCR1_POWER_OFF) gd->flags |= GD_FLG_SILENT; @@ -47,7 +48,7 @@ static u8 read_board_info(void) u8 val8; i2c_set_bus_num(0); - if (i2c_read(CFG_I2C_PCF8574A_ADDR, 0, 0, &val8, 1) == 0) + if (i2c_read(CONFIG_SYS_I2C_PCF8574A_ADDR, 0, 0, &val8, 1) == 0) return val8; else return 0; @@ -75,28 +76,28 @@ int checkboard(void) static struct pci_region pci_regions[] = { { - bus_start: CFG_PCI_MEM_BASE, - phys_start: CFG_PCI_MEM_PHYS, - size: CFG_PCI_MEM_SIZE, + bus_start: CONFIG_SYS_PCI_MEM_BASE, + phys_start: CONFIG_SYS_PCI_MEM_PHYS, + size: CONFIG_SYS_PCI_MEM_SIZE, flags: PCI_REGION_MEM | PCI_REGION_PREFETCH }, { - bus_start: CFG_PCI_MMIO_BASE, - phys_start: CFG_PCI_MMIO_PHYS, - size: CFG_PCI_MMIO_SIZE, + bus_start: CONFIG_SYS_PCI_MMIO_BASE, + phys_start: CONFIG_SYS_PCI_MMIO_PHYS, + size: CONFIG_SYS_PCI_MMIO_SIZE, flags: PCI_REGION_MEM }, { - bus_start: CFG_PCI_IO_BASE, - phys_start: CFG_PCI_IO_PHYS, - size: CFG_PCI_IO_SIZE, + bus_start: CONFIG_SYS_PCI_IO_BASE, + phys_start: CONFIG_SYS_PCI_IO_PHYS, + size: CONFIG_SYS_PCI_IO_SIZE, flags: PCI_REGION_IO } }; void pci_init_board(void) { - volatile immap_t *immr = (volatile immap_t *)CFG_IMMR; + volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR; volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk; volatile law83xx_t *pci_law = immr->sysconf.pcilaw; struct pci_region *reg[] = { pci_regions }; @@ -108,10 +109,10 @@ void pci_init_board(void) /* * Configure PCI Local Access Windows */ - pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR; + pci_law[0].bar = CONFIG_SYS_PCI_MEM_PHYS & LAWBAR_BAR; pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB; - pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR; + pci_law[1].bar = CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR; pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB; warmboot = gd->bd->bi_bootflags & BOOTFLAG_WARM; @@ -165,3 +166,9 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_tsec1_fixup(blob, bd); } #endif + +int board_eth_init(bd_t *bis) +{ + cpu_eth_init(bis); /* Initialize TSECs first */ + return pci_eth_init(bis); +} diff --git a/board/freescale/mpc8315erdb/sdram.c b/board/freescale/mpc8315erdb/sdram.c index 07e6486ee..ead7b1e0d 100644 --- a/board/freescale/mpc8315erdb/sdram.c +++ b/board/freescale/mpc8315erdb/sdram.c @@ -56,13 +56,13 @@ static void resume_from_sleep(void) */ static long fixed_sdram(void) { - volatile immap_t *im = (volatile immap_t *)CFG_IMMR; - u32 msize = CFG_DDR_SIZE * 1024 * 1024; + volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR; + u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024; u32 msize_log2 = __ilog2(msize); - im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE >> 12; + im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000; im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1); - im->sysconf.ddrcdr = CFG_DDRCDR_VALUE; + im->sysconf.ddrcdr = CONFIG_SYS_DDRCDR_VALUE; /* * Erratum DDR3 requires a 50ms delay after clearing DDRCDR[DDR_cfg], @@ -71,27 +71,27 @@ static long fixed_sdram(void) udelay(50000); im->ddr.csbnds[0].csbnds = (msize - 1) >> 24; - im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG; + im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG; /* Currently we use only one CS, so disable the other bank. */ im->ddr.cs_config[1] = 0; - im->ddr.sdram_clk_cntl = CFG_DDR_SDRAM_CLK_CNTL; - im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3; - im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; - im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; - im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0; + im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_SDRAM_CLK_CNTL; + im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3; + im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; + im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0; if (im->pmc.pmccr1 & PMCCR1_POWER_OFF) - im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG | SDRAM_CFG_BI; + im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG | SDRAM_CFG_BI; else - im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG; + im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG; - im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2; - im->ddr.sdram_mode = CFG_DDR_MODE; - im->ddr.sdram_mode2 = CFG_DDR_MODE2; + im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2; + im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE; + im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2; - im->ddr.sdram_interval = CFG_DDR_INTERVAL; + im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL; sync(); /* enable DDR controller */ @@ -103,7 +103,7 @@ static long fixed_sdram(void) phys_size_t initdram(int board_type) { - volatile immap_t *im = (volatile immap_t *)CFG_IMMR; + volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR; u32 msize; if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) diff --git a/board/freescale/mpc8323erdb/mpc8323erdb.c b/board/freescale/mpc8323erdb/mpc8323erdb.c index f5220abdb..8680a19a6 100644 --- a/board/freescale/mpc8323erdb/mpc8323erdb.c +++ b/board/freescale/mpc8323erdb/mpc8323erdb.c @@ -75,14 +75,14 @@ int fixed_sdram(void); phys_size_t initdram(int board_type) { - volatile immap_t *im = (immap_t *) CFG_IMMR; + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; u32 msize = 0; if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) return -1; /* DDR SDRAM - Main SODIMM */ - im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; + im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR; msize = fixed_sdram(); @@ -95,12 +95,12 @@ phys_size_t initdram(int board_type) ************************************************************************/ int fixed_sdram(void) { - volatile immap_t *im = (immap_t *) CFG_IMMR; + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; u32 msize = 0; u32 ddr_size; u32 ddr_size_log2; - msize = CFG_DDR_SIZE; + msize = CONFIG_SYS_DDR_SIZE; for (ddr_size = msize << 20, ddr_size_log2 = 0; (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) { if (ddr_size & 1) { @@ -109,18 +109,18 @@ int fixed_sdram(void) } im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); - im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL; - im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS; - im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG; - im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0; - im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; - im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; - im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3; - im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG; - im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2; - im->ddr.sdram_mode = CFG_DDR_MODE; - im->ddr.sdram_mode2 = CFG_DDR_MODE2; - im->ddr.sdram_interval = CFG_DDR_INTERVAL; + im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL; + im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS; + im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG; + im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0; + im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; + im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3; + im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG; + im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2; + im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE; + im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2; + im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL; __asm__ __volatile__ ("sync"); udelay(200); @@ -137,28 +137,28 @@ int checkboard(void) static struct pci_region pci_regions[] = { { - bus_start: CFG_PCI1_MEM_BASE, - phys_start: CFG_PCI1_MEM_PHYS, - size: CFG_PCI1_MEM_SIZE, + bus_start: CONFIG_SYS_PCI1_MEM_BASE, + phys_start: CONFIG_SYS_PCI1_MEM_PHYS, + size: CONFIG_SYS_PCI1_MEM_SIZE, flags: PCI_REGION_MEM | PCI_REGION_PREFETCH }, { - bus_start: CFG_PCI1_MMIO_BASE, - phys_start: CFG_PCI1_MMIO_PHYS, - size: CFG_PCI1_MMIO_SIZE, + bus_start: CONFIG_SYS_PCI1_MMIO_BASE, + phys_start: CONFIG_SYS_PCI1_MMIO_PHYS, + size: CONFIG_SYS_PCI1_MMIO_SIZE, flags: PCI_REGION_MEM }, { - bus_start: CFG_PCI1_IO_BASE, - phys_start: CFG_PCI1_IO_PHYS, - size: CFG_PCI1_IO_SIZE, + bus_start: CONFIG_SYS_PCI1_IO_BASE, + phys_start: CONFIG_SYS_PCI1_IO_PHYS, + size: CONFIG_SYS_PCI1_IO_SIZE, flags: PCI_REGION_IO } }; void pci_init_board(void) { - volatile immap_t *immr = (volatile immap_t *)CFG_IMMR; + volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR; volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk; volatile law83xx_t *pci_law = immr->sysconf.pcilaw; struct pci_region *reg[] = { pci_regions }; @@ -167,10 +167,10 @@ void pci_init_board(void) clk->occr |= 0xe0000000; /* Configure PCI Local Access Windows */ - pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR; + pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR; pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB; - pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR; + pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR; pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB; mpc83xx_pci_init(1, reg, 0); @@ -186,7 +186,7 @@ void ft_board_setup(void *blob, bd_t *bd) } #endif -#if defined(CFG_I2C_MAC_OFFSET) +#if defined(CONFIG_SYS_I2C_MAC_OFFSET) int mac_read_from_eeprom(void) { uchar buf[28]; @@ -196,9 +196,9 @@ int mac_read_from_eeprom(void) unsigned char enetvar[32]; /* Read MAC addresses from EEPROM */ - if (eeprom_read(CFG_I2C_EEPROM_ADDR, CFG_I2C_MAC_OFFSET, buf, 28)) { + if (eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, CONFIG_SYS_I2C_MAC_OFFSET, buf, 28)) { printf("\nEEPROM @ 0x%02x read FAILED!!!\n", - CFG_I2C_EEPROM_ADDR); + CONFIG_SYS_I2C_EEPROM_ADDR); } else { if (crc32(crc, buf, 24) == *(unsigned int *)&buf[24]) { printf("Reading MAC from EEPROM\n"); diff --git a/board/freescale/mpc832xemds/mpc832xemds.c b/board/freescale/mpc832xemds/mpc832xemds.c index 4ad6e9d45..d4d447931 100644 --- a/board/freescale/mpc832xemds/mpc832xemds.c +++ b/board/freescale/mpc832xemds/mpc832xemds.c @@ -76,7 +76,7 @@ const qe_iop_conf_t qe_iop_conf_tab[] = { int board_early_init_f(void) { - volatile u8 *bcsr = (volatile u8 *)CFG_BCSR; + volatile u8 *bcsr = (volatile u8 *)CONFIG_SYS_BCSR; /* Enable flash write */ bcsr[9] &= ~0x08; @@ -96,14 +96,14 @@ int fixed_sdram(void); phys_size_t initdram(int board_type) { - volatile immap_t *im = (immap_t *) CFG_IMMR; + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; u32 msize = 0; if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) return -1; /* DDR SDRAM - Main SODIMM */ - im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; + im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR; msize = fixed_sdram(); @@ -116,12 +116,12 @@ phys_size_t initdram(int board_type) ************************************************************************/ int fixed_sdram(void) { - volatile immap_t *im = (immap_t *) CFG_IMMR; + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; u32 msize = 0; u32 ddr_size; u32 ddr_size_log2; - msize = CFG_DDR_SIZE; + msize = CONFIG_SYS_DDR_SIZE; for (ddr_size = msize << 20, ddr_size_log2 = 0; (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) { if (ddr_size & 1) { @@ -130,21 +130,21 @@ int fixed_sdram(void) } im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); -#if (CFG_DDR_SIZE != 128) +#if (CONFIG_SYS_DDR_SIZE != 128) #warning Currenly any ddr size other than 128 is not supported #endif - im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL; - im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS; - im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG; - im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0; - im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; - im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; - im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3; - im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG; - im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2; - im->ddr.sdram_mode = CFG_DDR_MODE; - im->ddr.sdram_mode2 = CFG_DDR_MODE2; - im->ddr.sdram_interval = CFG_DDR_INTERVAL; + im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL; + im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS; + im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG; + im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0; + im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; + im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3; + im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG; + im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2; + im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE; + im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2; + im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL; __asm__ __volatile__ ("sync"); udelay(200); diff --git a/board/freescale/mpc832xemds/pci.c b/board/freescale/mpc832xemds/pci.c index b0304229d..2a48dd24e 100644 --- a/board/freescale/mpc832xemds/pci.c +++ b/board/freescale/mpc832xemds/pci.c @@ -67,7 +67,7 @@ void pci_init_board(void) volatile pcictrl83xx_t *pci_ctrl; volatile pciconf83xx_t *pci_conf; - immr = (immap_t *) CFG_IMMR; + immr = (immap_t *) CONFIG_SYS_IMMR; pci_law = immr->sysconf.pcilaw; pci_pot = immr->ios.pot; pci_ctrl = immr->pci_ctrl; @@ -93,7 +93,7 @@ void pci_init_board(void) hose[0].first_busno = 0; hose[0].last_busno = 0xff; pci_setup_indirect(&hose[0], - (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304)); + (CONFIG_SYS_IMMR + 0x8300), (CONFIG_SYS_IMMR + 0x8304)); reg16 = 0xff; pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0), @@ -134,7 +134,7 @@ void pci_init_board(void) u32 val32; u32 dev; - immr = (immap_t *) CFG_IMMR; + immr = (immap_t *) CONFIG_SYS_IMMR; clk = (clk83xx_t *) & immr->clk; pci_law = immr->sysconf.pcilaw; pci_pot = immr->ios.pot; @@ -161,10 +161,10 @@ void pci_init_board(void) /* * Configure PCI Local Access Windows */ - pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR; + pci_law[0].bar = CONFIG_SYS_PCI_MEM_PHYS & LAWBAR_BAR; pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M; - pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR; + pci_law[1].bar = CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR; pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_1M; /* @@ -172,26 +172,26 @@ void pci_init_board(void) */ /* PCI mem space - prefetch */ - pci_pot[0].potar = (CFG_PCI_MEM_BASE >> 12) & POTAR_TA_MASK; - pci_pot[0].pobar = (CFG_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[0].potar = (CONFIG_SYS_PCI_MEM_BASE >> 12) & POTAR_TA_MASK; + pci_pot[0].pobar = (CONFIG_SYS_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK; pci_pot[0].pocmr = POCMR_EN | POCMR_SE | (POCMR_CM_256M & POCMR_CM_MASK); /* PCI mmio - non-prefetch mem space */ - pci_pot[1].potar = (CFG_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK; - pci_pot[1].pobar = (CFG_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[1].potar = (CONFIG_SYS_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[1].pobar = (CONFIG_SYS_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK; pci_pot[1].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK); /* PCI IO space */ - pci_pot[2].potar = (CFG_PCI_IO_BASE >> 12) & POTAR_TA_MASK; - pci_pot[2].pobar = (CFG_PCI_IO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[2].potar = (CONFIG_SYS_PCI_IO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[2].pobar = (CONFIG_SYS_PCI_IO_PHYS >> 12) & POBAR_BA_MASK; pci_pot[2].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK); /* * Configure PCI Inbound Translation Windows */ - pci_ctrl[0].pitar1 = (CFG_PCI_SLV_MEM_LOCAL >> 12) & PITAR_TA_MASK; - pci_ctrl[0].pibar1 = (CFG_PCI_SLV_MEM_BUS >> 12) & PIBAR_MASK; + pci_ctrl[0].pitar1 = (CONFIG_SYS_PCI_SLV_MEM_LOCAL >> 12) & PITAR_TA_MASK; + pci_ctrl[0].pibar1 = (CONFIG_SYS_PCI_SLV_MEM_BUS >> 12) & PIBAR_MASK; pci_ctrl[0].piebar1 = 0x0; pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | @@ -209,31 +209,31 @@ void pci_init_board(void) /* PCI memory prefetch space */ pci_set_region(hose[0].regions + 0, - CFG_PCI_MEM_BASE, - CFG_PCI_MEM_PHYS, - CFG_PCI_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH); + CONFIG_SYS_PCI_MEM_BASE, + CONFIG_SYS_PCI_MEM_PHYS, + CONFIG_SYS_PCI_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH); /* PCI memory space */ pci_set_region(hose[0].regions + 1, - CFG_PCI_MMIO_BASE, - CFG_PCI_MMIO_PHYS, CFG_PCI_MMIO_SIZE, PCI_REGION_MEM); + CONFIG_SYS_PCI_MMIO_BASE, + CONFIG_SYS_PCI_MMIO_PHYS, CONFIG_SYS_PCI_MMIO_SIZE, PCI_REGION_MEM); /* PCI IO space */ pci_set_region(hose[0].regions + 2, - CFG_PCI_IO_BASE, - CFG_PCI_IO_PHYS, CFG_PCI_IO_SIZE, PCI_REGION_IO); + CONFIG_SYS_PCI_IO_BASE, + CONFIG_SYS_PCI_IO_PHYS, CONFIG_SYS_PCI_IO_SIZE, PCI_REGION_IO); /* System memory space */ pci_set_region(hose[0].regions + 3, - CFG_PCI_SLV_MEM_LOCAL, - CFG_PCI_SLV_MEM_BUS, - CFG_PCI_SLV_MEM_SIZE, + CONFIG_SYS_PCI_SLV_MEM_LOCAL, + CONFIG_SYS_PCI_SLV_MEM_BUS, + CONFIG_SYS_PCI_SLV_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_MEMORY); hose[0].region_count = 4; pci_setup_indirect(&hose[0], - (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304)); + (CONFIG_SYS_IMMR + 0x8300), (CONFIG_SYS_IMMR + 0x8304)); pci_register_hose(hose); diff --git a/board/freescale/mpc8349emds/mpc8349emds.c b/board/freescale/mpc8349emds/mpc8349emds.c index 4c04f2c4d..06064d970 100644 --- a/board/freescale/mpc8349emds/mpc8349emds.c +++ b/board/freescale/mpc8349emds/mpc8349emds.c @@ -44,12 +44,12 @@ void ddr_enable_ecc(unsigned int dram_size); int board_early_init_f (void) { - volatile u8* bcsr = (volatile u8*)CFG_BCSR; + volatile u8* bcsr = (volatile u8*)CONFIG_SYS_BCSR; /* Enable flash write */ bcsr[1] &= ~0x01; -#ifdef CFG_USE_MPC834XSYS_USB_PHY +#ifdef CONFIG_SYS_USE_MPC834XSYS_USB_PHY /* Use USB PHY on SYS board */ bcsr[5] |= 0x02; #endif @@ -61,14 +61,14 @@ int board_early_init_f (void) phys_size_t initdram (int board_type) { - volatile immap_t *im = (immap_t *)CFG_IMMR; + volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; u32 msize = 0; if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) return -1; /* DDR SDRAM - Main SODIMM */ - im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; + im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR; #if defined(CONFIG_SPD_EEPROM) msize = spd_sdram(); #else @@ -96,12 +96,12 @@ phys_size_t initdram (int board_type) ************************************************************************/ int fixed_sdram(void) { - volatile immap_t *im = (immap_t *)CFG_IMMR; + volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; u32 msize = 0; u32 ddr_size; u32 ddr_size_log2; - msize = CFG_DDR_SIZE; + msize = CONFIG_SYS_DDR_SIZE; for (ddr_size = msize << 20, ddr_size_log2 = 0; (ddr_size > 1); ddr_size = ddr_size>>1, ddr_size_log2++) { @@ -109,36 +109,36 @@ int fixed_sdram(void) return -1; } } - im->sysconf.ddrlaw[0].bar = ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff); + im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000; im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); -#if (CFG_DDR_SIZE != 256) +#if (CONFIG_SYS_DDR_SIZE != 256) #warning Currenly any ddr size other than 256 is not supported #endif #ifdef CONFIG_DDR_II - im->ddr.csbnds[2].csbnds = CFG_DDR_CS2_BNDS; - im->ddr.cs_config[2] = CFG_DDR_CS2_CONFIG; - im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0; - im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; - im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; - im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3; - im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG; - im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2; - im->ddr.sdram_mode = CFG_DDR_MODE; - im->ddr.sdram_mode2 = CFG_DDR_MODE2; - im->ddr.sdram_interval = CFG_DDR_INTERVAL; - im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL; + im->ddr.csbnds[2].csbnds = CONFIG_SYS_DDR_CS2_BNDS; + im->ddr.cs_config[2] = CONFIG_SYS_DDR_CS2_CONFIG; + im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0; + im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; + im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3; + im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG; + im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2; + im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE; + im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2; + im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL; + im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL; #else im->ddr.csbnds[2].csbnds = 0x0000000f; - im->ddr.cs_config[2] = CFG_DDR_CONFIG; + im->ddr.cs_config[2] = CONFIG_SYS_DDR_CONFIG; /* currently we use only one CS, so disable the other banks */ im->ddr.cs_config[0] = 0; im->ddr.cs_config[1] = 0; im->ddr.cs_config[3] = 0; - im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; - im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; + im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; im->ddr.sdram_cfg = SDRAM_CFG_SREN @@ -150,9 +150,9 @@ int fixed_sdram(void) /* for 32-bit mode burst length is 8 */ im->ddr.sdram_cfg |= (SDRAM_CFG_32_BE | SDRAM_CFG_8_BE); #endif - im->ddr.sdram_mode = CFG_DDR_MODE; + im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE; - im->ddr.sdram_interval = CFG_DDR_INTERVAL; + im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL; #endif udelay(200); @@ -160,7 +160,7 @@ int fixed_sdram(void) im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; return msize; } -#endif/*!CFG_SPD_EEPROM*/ +#endif/*!CONFIG_SYS_SPD_EEPROM*/ int checkboard (void) @@ -181,41 +181,41 @@ int checkboard (void) /* * if MPC8349EMDS is soldered with SDRAM */ -#if defined(CFG_BR2_PRELIM) \ - && defined(CFG_OR2_PRELIM) \ - && defined(CFG_LBLAWBAR2_PRELIM) \ - && defined(CFG_LBLAWAR2_PRELIM) +#if defined(CONFIG_SYS_BR2_PRELIM) \ + && defined(CONFIG_SYS_OR2_PRELIM) \ + && defined(CONFIG_SYS_LBLAWBAR2_PRELIM) \ + && defined(CONFIG_SYS_LBLAWAR2_PRELIM) /* * Initialize SDRAM memory on the Local Bus. */ void sdram_init(void) { - volatile immap_t *immap = (immap_t *)CFG_IMMR; - volatile lbus83xx_t *lbc= &immap->lbus; - uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE; + volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; + volatile fsl_lbus_t *lbc = &immap->lbus; + uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; /* * Setup SDRAM Base and Option Registers, already done in cpu_init.c */ /* setup mtrpt, lsrt and lbcr for LB bus */ - lbc->lbcr = CFG_LBC_LBCR; - lbc->mrtpr = CFG_LBC_MRTPR; - lbc->lsrt = CFG_LBC_LSRT; + lbc->lbcr = CONFIG_SYS_LBC_LBCR; + lbc->mrtpr = CONFIG_SYS_LBC_MRTPR; + lbc->lsrt = CONFIG_SYS_LBC_LSRT; asm("sync"); /* * Configure the SDRAM controller Machine Mode Register. */ - lbc->lsdmr = CFG_LBC_LSDMR_5; /* 0x40636733; normal operation */ + lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; /* 0x40636733; normal operation */ - lbc->lsdmr = CFG_LBC_LSDMR_1; /* 0x68636733; precharge all the banks */ + lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1; /* 0x68636733; precharge all the banks */ asm("sync"); *sdram_addr = 0xff; udelay(100); - lbc->lsdmr = CFG_LBC_LSDMR_2; /* 0x48636733; auto refresh */ + lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2; /* 0x48636733; auto refresh */ asm("sync"); /*1 times*/ *sdram_addr = 0xff; @@ -243,12 +243,12 @@ void sdram_init(void) udelay(100); /* 0x58636733; mode register write operation */ - lbc->lsdmr = CFG_LBC_LSDMR_4; + lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4; asm("sync"); *sdram_addr = 0xff; udelay(100); - lbc->lsdmr = CFG_LBC_LSDMR_5; /* 0x40636733; normal operation */ + lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; /* 0x40636733; normal operation */ asm("sync"); *sdram_addr = 0xff; udelay(100); @@ -273,14 +273,14 @@ int spi_cs_is_valid(unsigned int bus, unsigned int cs) void spi_cs_activate(struct spi_slave *slave) { - volatile gpio83xx_t *iopd = &((immap_t *)CFG_IMMR)->gpio[0]; + volatile gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0]; iopd->dat &= ~SPI_CS_MASK; } void spi_cs_deactivate(struct spi_slave *slave) { - volatile gpio83xx_t *iopd = &((immap_t *)CFG_IMMR)->gpio[0]; + volatile gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0]; iopd->dat |= SPI_CS_MASK; } diff --git a/board/freescale/mpc8349emds/pci.c b/board/freescale/mpc8349emds/pci.c index 9c19e303f..ad7bf5d50 100644 --- a/board/freescale/mpc8349emds/pci.c +++ b/board/freescale/mpc8349emds/pci.c @@ -33,21 +33,21 @@ DECLARE_GLOBAL_DATA_PTR; static struct pci_region pci1_regions[] = { { - bus_start: CFG_PCI1_MEM_BASE, - phys_start: CFG_PCI1_MEM_PHYS, - size: CFG_PCI1_MEM_SIZE, + bus_start: CONFIG_SYS_PCI1_MEM_BASE, + phys_start: CONFIG_SYS_PCI1_MEM_PHYS, + size: CONFIG_SYS_PCI1_MEM_SIZE, flags: PCI_REGION_MEM | PCI_REGION_PREFETCH }, { - bus_start: CFG_PCI1_IO_BASE, - phys_start: CFG_PCI1_IO_PHYS, - size: CFG_PCI1_IO_SIZE, + bus_start: CONFIG_SYS_PCI1_IO_BASE, + phys_start: CONFIG_SYS_PCI1_IO_PHYS, + size: CONFIG_SYS_PCI1_IO_SIZE, flags: PCI_REGION_IO }, { - bus_start: CFG_PCI1_MMIO_BASE, - phys_start: CFG_PCI1_MMIO_PHYS, - size: CFG_PCI1_MMIO_SIZE, + bus_start: CONFIG_SYS_PCI1_MMIO_BASE, + phys_start: CONFIG_SYS_PCI1_MMIO_PHYS, + size: CONFIG_SYS_PCI1_MMIO_SIZE, flags: PCI_REGION_MEM }, }; @@ -55,21 +55,21 @@ static struct pci_region pci1_regions[] = { #ifdef CONFIG_MPC83XX_PCI2 static struct pci_region pci2_regions[] = { { - bus_start: CFG_PCI2_MEM_BASE, - phys_start: CFG_PCI2_MEM_PHYS, - size: CFG_PCI2_MEM_SIZE, + bus_start: CONFIG_SYS_PCI2_MEM_BASE, + phys_start: CONFIG_SYS_PCI2_MEM_PHYS, + size: CONFIG_SYS_PCI2_MEM_SIZE, flags: PCI_REGION_MEM | PCI_REGION_PREFETCH }, { - bus_start: CFG_PCI2_IO_BASE, - phys_start: CFG_PCI2_IO_PHYS, - size: CFG_PCI2_IO_SIZE, + bus_start: CONFIG_SYS_PCI2_IO_BASE, + phys_start: CONFIG_SYS_PCI2_IO_PHYS, + size: CONFIG_SYS_PCI2_IO_SIZE, flags: PCI_REGION_IO }, { - bus_start: CFG_PCI2_MMIO_BASE, - phys_start: CFG_PCI2_MMIO_PHYS, - size: CFG_PCI2_MMIO_SIZE, + bus_start: CONFIG_SYS_PCI2_MMIO_BASE, + phys_start: CONFIG_SYS_PCI2_MMIO_PHYS, + size: CONFIG_SYS_PCI2_MMIO_SIZE, flags: PCI_REGION_MEM }, }; @@ -135,7 +135,7 @@ void pib_init(void) void pci_init_board(void) { - volatile immap_t *immr = (volatile immap_t *)CFG_IMMR; + volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR; volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk; volatile law83xx_t *pci_law = immr->sysconf.pcilaw; #ifndef CONFIG_MPC83XX_PCI2 @@ -152,10 +152,10 @@ void pci_init_board(void) udelay(2000); /* Configure PCI Local Access Windows */ - pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR; + pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR; pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G; - pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR; + pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR; pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_4M; udelay(2000); @@ -170,7 +170,7 @@ void pci_init_board(void) #else void pci_init_board(void) { - volatile immap_t *immr = (volatile immap_t *)CFG_IMMR; + volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR; volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk; volatile law83xx_t *pci_law = immr->sysconf.pcilaw; volatile pcictrl83xx_t *pci_ctrl = &immr->pci_ctrl[0]; @@ -181,10 +181,10 @@ void pci_init_board(void) udelay(2000); /* Configure PCI Local Access Windows */ - pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR; + pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR; pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G; - pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR; + pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR; pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_4M; udelay(2000); diff --git a/board/freescale/mpc8349itx/mpc8349itx.c b/board/freescale/mpc8349itx/mpc8349itx.c index d3fc560df..35285b4c9 100644 --- a/board/freescale/mpc8349itx/mpc8349itx.c +++ b/board/freescale/mpc8349itx/mpc8349itx.c @@ -42,11 +42,11 @@ ************************************************************************/ int fixed_sdram(void) { - volatile immap_t *im = (immap_t *) CFG_IMMR; + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; u32 ddr_size; /* The size of RAM, in bytes */ u32 ddr_size_log2 = 0; - for (ddr_size = CFG_DDR_SIZE * 0x100000; ddr_size > 1; ddr_size >>= 1) { + for (ddr_size = CONFIG_SYS_DDR_SIZE * 0x100000; ddr_size > 1; ddr_size >>= 1) { if (ddr_size & 1) { return -1; } @@ -55,11 +55,11 @@ int fixed_sdram(void) im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); - im->sysconf.ddrlaw[0].bar = (CFG_DDR_SDRAM_BASE >> 12) & 0xfffff; + im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000; /* Only one CS0 for DDR */ im->ddr.csbnds[0].csbnds = 0x0000000f; - im->ddr.cs_config[0] = CFG_DDR_CONFIG; + im->ddr.cs_config[0] = CONFIG_SYS_DDR_CONFIG; debug("cs0_bnds = 0x%08x\n", im->ddr.csbnds[0].csbnds); debug("cs0_config = 0x%08x\n", im->ddr.cs_config[0]); @@ -67,15 +67,15 @@ int fixed_sdram(void) debug("DDR:bar=0x%08x\n", im->sysconf.ddrlaw[0].bar); debug("DDR:ar=0x%08x\n", im->sysconf.ddrlaw[0].ar); - im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; - im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;/* Was "2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT" */ + im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;/* Was "2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT" */ im->ddr.sdram_cfg = SDRAM_CFG_SREN | SDRAM_CFG_SDRAM_TYPE_DDR1; im->ddr.sdram_mode = (0x0000 << SDRAM_MODE_ESD_SHIFT) | (0x0032 << SDRAM_MODE_SD_SHIFT); im->ddr.sdram_interval = (0x0410 << SDRAM_INTERVAL_REFINT_SHIFT) | (0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT); - im->ddr.sdram_clk_cntl = CFG_DDR_SDRAM_CLK_CNTL; + im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_SDRAM_CLK_CNTL; udelay(200); @@ -87,7 +87,7 @@ int fixed_sdram(void) debug("DDR:sdram_interval=0x%08x\n", im->ddr.sdram_interval); debug("DDR:sdram_cfg=0x%08x\n", im->ddr.sdram_cfg); - return CFG_DDR_SIZE; + return CONFIG_SYS_DDR_SIZE; } #endif @@ -130,7 +130,7 @@ volatile static struct pci_controller hose[] = { phys_size_t initdram(int board_type) { - volatile immap_t *im = (immap_t *) CFG_IMMR; + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; u32 msize = 0; #ifdef CONFIG_DDR_ECC volatile ddr83xx_t *ddr = &im->ddr; @@ -140,7 +140,7 @@ phys_size_t initdram(int board_type) return -1; /* DDR SDRAM - Main SODIMM */ - im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; + im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR; #ifdef CONFIG_SPD_EEPROM msize = spd_sdram(); #else @@ -196,7 +196,7 @@ int misc_init_f(void) don't enable compact flash for U-Boot. */ - vsc7385_cpuctrl = (volatile u32 *)(CFG_VSC7385_BASE + 0x1c0c0); + vsc7385_cpuctrl = (volatile u32 *)(CONFIG_SYS_VSC7385_BASE + 0x1c0c0); *vsc7385_cpuctrl |= 0x0c; #endif @@ -220,11 +220,11 @@ int misc_init_f(void) 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01 }; - volatile immap_t *immap = (immap_t *) CFG_IMMR; - volatile lbus83xx_t *lbus = &immap->lbus; + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; + volatile fsl_lbus_t *lbus = &immap->lbus; - lbus->bank[3].br = CFG_BR3_PRELIM; - lbus->bank[3].or = CFG_OR3_PRELIM; + lbus->bank[3].br = CONFIG_SYS_BR3_PRELIM; + lbus->bank[3].or = CONFIG_SYS_OR3_PRELIM; /* Program the MAMR. RFEN=0, OP=00, UWPL=1, AM=000, DS=01, G0CL=000, GPL4=0, RLF=0001, WLF=0001, TLF=0001, MAD=000000 @@ -265,26 +265,26 @@ int misc_init_r(void) unsigned int orig_bus = i2c_get_bus_num(); u8 i2c_data; -#ifdef CFG_I2C_RTC_ADDR +#ifdef CONFIG_SYS_I2C_RTC_ADDR u8 ds1339_data[17]; #endif -#ifdef CFG_I2C_EEPROM_ADDR +#ifdef CONFIG_SYS_I2C_EEPROM_ADDR static u8 eeprom_data[] = /* HRCW data */ { 0xAA, 0x55, 0xAA, /* Preamble */ 0x7C, /* ACS=0, BYTE_EN=1111, CONT=1 */ 0x02, 0x40, /* RCWL ADDR=0x0_0900 */ - (CFG_HRCW_LOW >> 24) & 0xFF, - (CFG_HRCW_LOW >> 16) & 0xFF, - (CFG_HRCW_LOW >> 8) & 0xFF, - CFG_HRCW_LOW & 0xFF, + (CONFIG_SYS_HRCW_LOW >> 24) & 0xFF, + (CONFIG_SYS_HRCW_LOW >> 16) & 0xFF, + (CONFIG_SYS_HRCW_LOW >> 8) & 0xFF, + CONFIG_SYS_HRCW_LOW & 0xFF, 0x7C, /* ACS=0, BYTE_EN=1111, CONT=1 */ 0x02, 0x41, /* RCWH ADDR=0x0_0904 */ - (CFG_HRCW_HIGH >> 24) & 0xFF, - (CFG_HRCW_HIGH >> 16) & 0xFF, - (CFG_HRCW_HIGH >> 8) & 0xFF, - CFG_HRCW_HIGH & 0xFF + (CONFIG_SYS_HRCW_HIGH >> 24) & 0xFF, + (CONFIG_SYS_HRCW_HIGH >> 16) & 0xFF, + (CONFIG_SYS_HRCW_HIGH >> 8) & 0xFF, + CONFIG_SYS_HRCW_HIGH & 0xFF }; u8 data[sizeof(eeprom_data)]; @@ -292,22 +292,22 @@ int misc_init_r(void) printf("Board revision: "); i2c_set_bus_num(1); - if (i2c_read(CFG_I2C_8574A_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0) + if (i2c_read(CONFIG_SYS_I2C_8574A_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0) printf("%u.%u (PCF8475A)\n", (i2c_data & 0x02) >> 1, i2c_data & 0x01); - else if (i2c_read(CFG_I2C_8574_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0) + else if (i2c_read(CONFIG_SYS_I2C_8574_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0) printf("%u.%u (PCF8475)\n", (i2c_data & 0x02) >> 1, i2c_data & 0x01); else { printf("Unknown\n"); rc = 1; } -#ifdef CFG_I2C_EEPROM_ADDR +#ifdef CONFIG_SYS_I2C_EEPROM_ADDR i2c_set_bus_num(0); - if (i2c_read(CFG_I2C_EEPROM_ADDR, 0, 2, data, sizeof(data)) == 0) { + if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, data, sizeof(data)) == 0) { if (memcmp(data, eeprom_data, sizeof(data)) != 0) { if (i2c_write - (CFG_I2C_EEPROM_ADDR, 0, 2, eeprom_data, + (CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, eeprom_data, sizeof(eeprom_data)) != 0) { puts("Failure writing the HRCW to EEPROM via I2C.\n"); rc = 1; @@ -319,10 +319,10 @@ int misc_init_r(void) } #endif -#ifdef CFG_I2C_RTC_ADDR +#ifdef CONFIG_SYS_I2C_RTC_ADDR i2c_set_bus_num(1); - if (i2c_read(CFG_I2C_RTC_ADDR, 0, 1, ds1339_data, sizeof(ds1339_data)) + if (i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, ds1339_data, sizeof(ds1339_data)) == 0) { /* Work-around for MPC8349E-mITX bug #13601. @@ -366,7 +366,7 @@ int misc_init_r(void) */ if (i2c_write - (CFG_I2C_RTC_ADDR, 0, 1, ds1339_data, + (CONFIG_SYS_I2C_RTC_ADDR, 0, 1, ds1339_data, sizeof(ds1339_data))) { puts("Failure writing to the RTC via I2C.\n"); rc = 1; diff --git a/board/freescale/mpc8349itx/pci.c b/board/freescale/mpc8349itx/pci.c index d33edf367..fd2c172de 100644 --- a/board/freescale/mpc8349itx/pci.c +++ b/board/freescale/mpc8349itx/pci.c @@ -37,8 +37,8 @@ DECLARE_GLOBAL_DATA_PTR; /* System RAM mapped to PCI space */ -#define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE -#define CONFIG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE +#define CONFIG_PCI_SYS_MEM_BUS CONFIG_SYS_SDRAM_BASE +#define CONFIG_PCI_SYS_MEM_PHYS CONFIG_SYS_SDRAM_BASE #ifndef CONFIG_PCI_PNP static struct pci_config_table pci_mpc8349itx_config_table[] = { @@ -92,7 +92,7 @@ void pci_init_board(void) u32 dev; struct pci_controller *hose; - immr = (immap_t *) CFG_IMMR; + immr = (immap_t *) CONFIG_SYS_IMMR; clk = (clk83xx_t *) & immr->clk; pci_law = immr->sysconf.pcilaw; pci_pot = immr->ios.pot; @@ -111,8 +111,8 @@ void pci_init_board(void) #ifdef CONFIG_HARD_I2C i2c_set_bus_num(1); /* Read the PCI_M66EN jumper setting */ - if ((i2c_read(CFG_I2C_8574_ADDR2, 0, 0, ®8, sizeof(reg8)) == 0) || - (i2c_read(CFG_I2C_8574A_ADDR2, 0, 0, ®8, sizeof(reg8)) == 0)) { + if ((i2c_read(CONFIG_SYS_I2C_8574_ADDR2, 0, 0, ®8, sizeof(reg8)) == 0) || + (i2c_read(CONFIG_SYS_I2C_8574A_ADDR2, 0, 0, ®8, sizeof(reg8)) == 0)) { if (reg8 & I2C_8574_PCI66) clk->occr = 0xff000000; /* 66 MHz PCI */ else @@ -150,10 +150,10 @@ void pci_init_board(void) /* * Configure PCI Local Access Windows */ - pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR; + pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR; pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G; - pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR; + pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR; pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_32M; /* @@ -161,18 +161,18 @@ void pci_init_board(void) */ /* PCI1 mem space - prefetch */ - pci_pot[0].potar = (CFG_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK; - pci_pot[0].pobar = (CFG_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[0].potar = (CONFIG_SYS_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK; + pci_pot[0].pobar = (CONFIG_SYS_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK; pci_pot[0].pocmr = POCMR_EN | POCMR_PREFETCH_EN | POCMR_CM_256M; /* PCI1 IO space */ - pci_pot[1].potar = (CFG_PCI1_IO_BASE >> 12) & POTAR_TA_MASK; - pci_pot[1].pobar = (CFG_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[1].potar = (CONFIG_SYS_PCI1_IO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[1].pobar = (CONFIG_SYS_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK; pci_pot[1].pocmr = POCMR_EN | POCMR_IO | POCMR_CM_16M; /* PCI1 mmio - non-prefetch mem space */ - pci_pot[2].potar = (CFG_PCI1_MMIO_BASE >> 12) & POTAR_TA_MASK; - pci_pot[2].pobar = (CFG_PCI1_MMIO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[2].potar = (CONFIG_SYS_PCI1_MMIO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[2].pobar = (CONFIG_SYS_PCI1_MMIO_PHYS >> 12) & POBAR_BA_MASK; pci_pot[2].pocmr = POCMR_EN | POCMR_CM_256M; /* @@ -192,19 +192,19 @@ void pci_init_board(void) /* PCI memory prefetch space */ pci_set_region(hose->regions + 0, - CFG_PCI1_MEM_BASE, - CFG_PCI1_MEM_PHYS, - CFG_PCI1_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH); + CONFIG_SYS_PCI1_MEM_BASE, + CONFIG_SYS_PCI1_MEM_PHYS, + CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH); /* PCI memory space */ pci_set_region(hose->regions + 1, - CFG_PCI1_MMIO_BASE, - CFG_PCI1_MMIO_PHYS, CFG_PCI1_MMIO_SIZE, PCI_REGION_MEM); + CONFIG_SYS_PCI1_MMIO_BASE, + CONFIG_SYS_PCI1_MMIO_PHYS, CONFIG_SYS_PCI1_MMIO_SIZE, PCI_REGION_MEM); /* PCI IO space */ pci_set_region(hose->regions + 2, - CFG_PCI1_IO_BASE, - CFG_PCI1_IO_PHYS, CFG_PCI1_IO_SIZE, PCI_REGION_IO); + CONFIG_SYS_PCI1_IO_BASE, + CONFIG_SYS_PCI1_IO_PHYS, CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO); /* System memory space */ pci_set_region(hose->regions + 3, @@ -215,7 +215,7 @@ void pci_init_board(void) hose->region_count = 4; pci_setup_indirect(hose, - (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304)); + (CONFIG_SYS_IMMR + 0x8300), (CONFIG_SYS_IMMR + 0x8304)); pci_register_hose(hose); @@ -251,18 +251,18 @@ void pci_init_board(void) */ /* PCI2 mem space - prefetch */ - pci_pot[3].potar = (CFG_PCI2_MEM_BASE >> 12) & POTAR_TA_MASK; - pci_pot[3].pobar = (CFG_PCI2_MEM_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[3].potar = (CONFIG_SYS_PCI2_MEM_BASE >> 12) & POTAR_TA_MASK; + pci_pot[3].pobar = (CONFIG_SYS_PCI2_MEM_PHYS >> 12) & POBAR_BA_MASK; pci_pot[3].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_PREFETCH_EN | POCMR_CM_256M; /* PCI2 IO space */ - pci_pot[4].potar = (CFG_PCI2_IO_BASE >> 12) & POTAR_TA_MASK; - pci_pot[4].pobar = (CFG_PCI2_IO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[4].potar = (CONFIG_SYS_PCI2_IO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[4].pobar = (CONFIG_SYS_PCI2_IO_PHYS >> 12) & POBAR_BA_MASK; pci_pot[4].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_IO | POCMR_CM_16M; /* PCI2 mmio - non-prefetch mem space */ - pci_pot[5].potar = (CFG_PCI2_MMIO_BASE >> 12) & POTAR_TA_MASK; - pci_pot[5].pobar = (CFG_PCI2_MMIO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[5].potar = (CONFIG_SYS_PCI2_MMIO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[5].pobar = (CONFIG_SYS_PCI2_MMIO_PHYS >> 12) & POBAR_BA_MASK; pci_pot[5].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_CM_256M; /* @@ -283,19 +283,19 @@ void pci_init_board(void) /* PCI memory prefetch space */ pci_set_region(hose->regions + 0, - CFG_PCI2_MEM_BASE, - CFG_PCI2_MEM_PHYS, - CFG_PCI2_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH); + CONFIG_SYS_PCI2_MEM_BASE, + CONFIG_SYS_PCI2_MEM_PHYS, + CONFIG_SYS_PCI2_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH); /* PCI memory space */ pci_set_region(hose->regions + 1, - CFG_PCI2_MMIO_BASE, - CFG_PCI2_MMIO_PHYS, CFG_PCI2_MMIO_SIZE, PCI_REGION_MEM); + CONFIG_SYS_PCI2_MMIO_BASE, + CONFIG_SYS_PCI2_MMIO_PHYS, CONFIG_SYS_PCI2_MMIO_SIZE, PCI_REGION_MEM); /* PCI IO space */ pci_set_region(hose->regions + 2, - CFG_PCI2_IO_BASE, - CFG_PCI2_IO_PHYS, CFG_PCI2_IO_SIZE, PCI_REGION_IO); + CONFIG_SYS_PCI2_IO_BASE, + CONFIG_SYS_PCI2_IO_PHYS, CONFIG_SYS_PCI2_IO_SIZE, PCI_REGION_IO); /* System memory space */ pci_set_region(hose->regions + 3, @@ -306,7 +306,7 @@ void pci_init_board(void) hose->region_count = 4; pci_setup_indirect(hose, - (CFG_IMMR + 0x8380), (CFG_IMMR + 0x8384)); + (CONFIG_SYS_IMMR + 0x8380), (CONFIG_SYS_IMMR + 0x8384)); pci_register_hose(hose); diff --git a/board/freescale/mpc8360emds/mpc8360emds.c b/board/freescale/mpc8360emds/mpc8360emds.c index 5c3b5dbc9..85c0120f2 100644 --- a/board/freescale/mpc8360emds/mpc8360emds.c +++ b/board/freescale/mpc8360emds/mpc8360emds.c @@ -92,8 +92,8 @@ const qe_iop_conf_t qe_iop_conf_tab[] = { int board_early_init_f(void) { - u8 *bcsr = (u8 *)CFG_BCSR; - const immap_t *immr = (immap_t *)CFG_IMMR; + u8 *bcsr = (u8 *)CONFIG_SYS_BCSR; + const immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; /* Enable flash write */ bcsr[0xa] &= ~0x04; @@ -120,18 +120,18 @@ int board_early_init_r(void) extern void ddr_enable_ecc(unsigned int dram_size); #endif int fixed_sdram(void); -void sdram_init(void); +static int sdram_init(unsigned int base); phys_size_t initdram(int board_type) { - volatile immap_t *im = (immap_t *) CFG_IMMR; + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; u32 msize = 0; if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) return -1; /* DDR SDRAM - Main SODIMM */ - im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; + im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR; #if defined(CONFIG_SPD_EEPROM) msize = spd_sdram(); #else @@ -147,7 +147,7 @@ phys_size_t initdram(int board_type) /* * Initialize SDRAM if it is on local bus. */ - sdram_init(); + msize += sdram_init(msize * 1024 * 1024); /* return total bus SDRAM size(bytes) -- DDR */ return (msize * 1024 * 1024); @@ -159,12 +159,12 @@ phys_size_t initdram(int board_type) ************************************************************************/ int fixed_sdram(void) { - volatile immap_t *im = (immap_t *) CFG_IMMR; + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; u32 msize = 0; u32 ddr_size; u32 ddr_size_log2; - msize = CFG_DDR_SIZE; + msize = CONFIG_SYS_DDR_SIZE; for (ddr_size = msize << 20, ddr_size_log2 = 0; (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) { if (ddr_size & 1) { @@ -173,42 +173,42 @@ int fixed_sdram(void) } im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); -#if (CFG_DDR_SIZE != 256) +#if (CONFIG_SYS_DDR_SIZE != 256) #warning Currenly any ddr size other than 256 is not supported #endif #ifdef CONFIG_DDR_II - im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS; - im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG; - im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0; - im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; - im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; - im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3; - im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG; - im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2; - im->ddr.sdram_mode = CFG_DDR_MODE; - im->ddr.sdram_mode2 = CFG_DDR_MODE2; - im->ddr.sdram_interval = CFG_DDR_INTERVAL; - im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL; + im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS; + im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG; + im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0; + im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; + im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3; + im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG; + im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2; + im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE; + im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2; + im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL; + im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL; #else im->ddr.csbnds[0].csbnds = 0x00000007; im->ddr.csbnds[1].csbnds = 0x0008000f; - im->ddr.cs_config[0] = CFG_DDR_CONFIG; - im->ddr.cs_config[1] = CFG_DDR_CONFIG; + im->ddr.cs_config[0] = CONFIG_SYS_DDR_CONFIG; + im->ddr.cs_config[1] = CONFIG_SYS_DDR_CONFIG; - im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; - im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; - im->ddr.sdram_cfg = CFG_DDR_CONTROL; + im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; + im->ddr.sdram_cfg = CONFIG_SYS_DDR_CONTROL; - im->ddr.sdram_mode = CFG_DDR_MODE; - im->ddr.sdram_interval = CFG_DDR_INTERVAL; + im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE; + im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL; #endif udelay(200); im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; return msize; } -#endif /*!CFG_SPD_EEPROM */ +#endif /*!CONFIG_SYS_SPD_EEPROM */ int checkboard(void) { @@ -219,34 +219,43 @@ int checkboard(void) /* * if MPC8360EMDS is soldered with SDRAM */ -#if defined(CFG_BR2_PRELIM) \ - && defined(CFG_OR2_PRELIM) \ - && defined(CFG_LBLAWBAR2_PRELIM) \ - && defined(CFG_LBLAWAR2_PRELIM) +#ifdef CONFIG_SYS_LB_SDRAM /* * Initialize SDRAM memory on the Local Bus. */ -void sdram_init(void) +static int sdram_init(unsigned int base) { - volatile immap_t *immap = (immap_t *) CFG_IMMR; - volatile lbus83xx_t *lbc = &immap->lbus; - uint *sdram_addr = (uint *) CFG_LBC_SDRAM_BASE; + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; + volatile fsl_lbus_t *lbc = &immap->lbus; + const int sdram_size = CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024; + int rem = base % sdram_size; + uint *sdram_addr; + /* window base address should be aligned to the window size */ + if (rem) + base = base - rem + sdram_size; + + sdram_addr = (uint *)base; /* - * Setup SDRAM Base and Option Registers, already done in cpu_init.c + * Setup SDRAM Base and Option Registers */ + immap->lbus.bank[2].br = base | CONFIG_SYS_BR2; + immap->lbus.bank[2].or = CONFIG_SYS_OR2; + immap->sysconf.lblaw[2].bar = base; + immap->sysconf.lblaw[2].ar = CONFIG_SYS_LBLAWAR2; + /*setup mtrpt, lsrt and lbcr for LB bus */ - lbc->lbcr = CFG_LBC_LBCR; - lbc->mrtpr = CFG_LBC_MRTPR; - lbc->lsrt = CFG_LBC_LSRT; + lbc->lbcr = CONFIG_SYS_LBC_LBCR; + lbc->mrtpr = CONFIG_SYS_LBC_MRTPR; + lbc->lsrt = CONFIG_SYS_LBC_LSRT; asm("sync"); /* * Configure the SDRAM controller Machine Mode Register. */ - lbc->lsdmr = CFG_LBC_LSDMR_5; /* Normal Operation */ - lbc->lsdmr = CFG_LBC_LSDMR_1; /* Precharge All Banks */ + lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; /* Normal Operation */ + lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1; /* Precharge All Banks */ asm("sync"); *sdram_addr = 0xff; udelay(100); @@ -254,7 +263,7 @@ void sdram_init(void) /* * We need do 8 times auto refresh operation. */ - lbc->lsdmr = CFG_LBC_LSDMR_2; + lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2; asm("sync"); *sdram_addr = 0xff; /* 1 times */ udelay(100); @@ -274,27 +283,33 @@ void sdram_init(void) udelay(100); /* Mode register write operation */ - lbc->lsdmr = CFG_LBC_LSDMR_4; + lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4; asm("sync"); *(sdram_addr + 0xcc) = 0xff; udelay(100); /* Normal operation */ - lbc->lsdmr = CFG_LBC_LSDMR_5 | 0x40000000; + lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5 | 0x40000000; asm("sync"); *sdram_addr = 0xff; udelay(100); + + /* + * In non-aligned case we don't [normally] use that memory because + * there is a hole. + */ + if (rem) + return 0; + return CONFIG_SYS_LBC_SDRAM_SIZE; } #else -void sdram_init(void) -{ -} +static int sdram_init(unsigned int base) { return 0; } #endif #if defined(CONFIG_OF_BOARD_SETUP) void ft_board_setup(void *blob, bd_t *bd) { - const immap_t *immr = (immap_t *)CFG_IMMR; + const immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; ft_cpu_setup(blob, bd); #ifdef CONFIG_PCI diff --git a/board/freescale/mpc8360emds/pci.c b/board/freescale/mpc8360emds/pci.c index 4a0d460fa..935aca26d 100644 --- a/board/freescale/mpc8360emds/pci.c +++ b/board/freescale/mpc8360emds/pci.c @@ -67,7 +67,7 @@ void pci_init_board(void) volatile pcictrl83xx_t *pci_ctrl; volatile pciconf83xx_t *pci_conf; - immr = (immap_t *) CFG_IMMR; + immr = (immap_t *) CONFIG_SYS_IMMR; pci_law = immr->sysconf.pcilaw; pci_pot = immr->ios.pot; pci_ctrl = immr->pci_ctrl; @@ -93,7 +93,7 @@ void pci_init_board(void) hose[0].first_busno = 0; hose[0].last_busno = 0xff; pci_setup_indirect(&hose[0], - (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304)); + (CONFIG_SYS_IMMR + 0x8300), (CONFIG_SYS_IMMR + 0x8304)); reg16 = 0xff; pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0), @@ -134,7 +134,7 @@ void pci_init_board(void) u32 val32; u32 dev; - immr = (immap_t *) CFG_IMMR; + immr = (immap_t *) CONFIG_SYS_IMMR; clk = (clk83xx_t *) & immr->clk; pci_law = immr->sysconf.pcilaw; pci_pot = immr->ios.pot; @@ -161,10 +161,10 @@ void pci_init_board(void) /* * Configure PCI Local Access Windows */ - pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR; + pci_law[0].bar = CONFIG_SYS_PCI_MEM_PHYS & LAWBAR_BAR; pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M; - pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR; + pci_law[1].bar = CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR; pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_1M; /* @@ -172,26 +172,26 @@ void pci_init_board(void) */ /* PCI mem space - prefetch */ - pci_pot[0].potar = (CFG_PCI_MEM_BASE >> 12) & POTAR_TA_MASK; - pci_pot[0].pobar = (CFG_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[0].potar = (CONFIG_SYS_PCI_MEM_BASE >> 12) & POTAR_TA_MASK; + pci_pot[0].pobar = (CONFIG_SYS_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK; pci_pot[0].pocmr = POCMR_EN | POCMR_SE | (POCMR_CM_256M & POCMR_CM_MASK); /* PCI mmio - non-prefetch mem space */ - pci_pot[1].potar = (CFG_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK; - pci_pot[1].pobar = (CFG_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[1].potar = (CONFIG_SYS_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[1].pobar = (CONFIG_SYS_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK; pci_pot[1].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK); /* PCI IO space */ - pci_pot[2].potar = (CFG_PCI_IO_BASE >> 12) & POTAR_TA_MASK; - pci_pot[2].pobar = (CFG_PCI_IO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[2].potar = (CONFIG_SYS_PCI_IO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[2].pobar = (CONFIG_SYS_PCI_IO_PHYS >> 12) & POBAR_BA_MASK; pci_pot[2].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK); /* * Configure PCI Inbound Translation Windows */ - pci_ctrl[0].pitar1 = (CFG_PCI_SLV_MEM_LOCAL >> 12) & PITAR_TA_MASK; - pci_ctrl[0].pibar1 = (CFG_PCI_SLV_MEM_BUS >> 12) & PIBAR_MASK; + pci_ctrl[0].pitar1 = (CONFIG_SYS_PCI_SLV_MEM_LOCAL >> 12) & PITAR_TA_MASK; + pci_ctrl[0].pibar1 = (CONFIG_SYS_PCI_SLV_MEM_BUS >> 12) & PIBAR_MASK; pci_ctrl[0].piebar1 = 0x0; pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | @@ -209,31 +209,31 @@ void pci_init_board(void) /* PCI memory prefetch space */ pci_set_region(hose[0].regions + 0, - CFG_PCI_MEM_BASE, - CFG_PCI_MEM_PHYS, - CFG_PCI_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH); + CONFIG_SYS_PCI_MEM_BASE, + CONFIG_SYS_PCI_MEM_PHYS, + CONFIG_SYS_PCI_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH); /* PCI memory space */ pci_set_region(hose[0].regions + 1, - CFG_PCI_MMIO_BASE, - CFG_PCI_MMIO_PHYS, CFG_PCI_MMIO_SIZE, PCI_REGION_MEM); + CONFIG_SYS_PCI_MMIO_BASE, + CONFIG_SYS_PCI_MMIO_PHYS, CONFIG_SYS_PCI_MMIO_SIZE, PCI_REGION_MEM); /* PCI IO space */ pci_set_region(hose[0].regions + 2, - CFG_PCI_IO_BASE, - CFG_PCI_IO_PHYS, CFG_PCI_IO_SIZE, PCI_REGION_IO); + CONFIG_SYS_PCI_IO_BASE, + CONFIG_SYS_PCI_IO_PHYS, CONFIG_SYS_PCI_IO_SIZE, PCI_REGION_IO); /* System memory space */ pci_set_region(hose[0].regions + 3, - CFG_PCI_SLV_MEM_LOCAL, - CFG_PCI_SLV_MEM_BUS, - CFG_PCI_SLV_MEM_SIZE, + CONFIG_SYS_PCI_SLV_MEM_LOCAL, + CONFIG_SYS_PCI_SLV_MEM_BUS, + CONFIG_SYS_PCI_SLV_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_MEMORY); hose[0].region_count = 4; pci_setup_indirect(&hose[0], - (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304)); + (CONFIG_SYS_IMMR + 0x8300), (CONFIG_SYS_IMMR + 0x8304)); pci_register_hose(hose); diff --git a/board/freescale/mpc8360erdk/mpc8360erdk.c b/board/freescale/mpc8360erdk/mpc8360erdk.c index 61d700014..af3b8ceae 100644 --- a/board/freescale/mpc8360erdk/mpc8360erdk.c +++ b/board/freescale/mpc8360erdk/mpc8360erdk.c @@ -214,7 +214,7 @@ int board_early_init_f(void) int board_early_init_r(void) { - void *reg = (void *)(CFG_IMMR + 0x14a8); + void *reg = (void *)(CONFIG_SYS_IMMR + 0x14a8); u32 val; /* @@ -233,12 +233,12 @@ int board_early_init_r(void) int fixed_sdram(void) { - volatile immap_t *im = (immap_t *)CFG_IMMR; + volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; u32 msize = 0; u32 ddr_size; u32 ddr_size_log2; - msize = CFG_DDR_SIZE; + msize = CONFIG_SYS_DDR_SIZE; for (ddr_size = msize << 20, ddr_size_log2 = 0; (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) { if (ddr_size & 1) @@ -248,18 +248,18 @@ int fixed_sdram(void) im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); - im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS; - im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG; - im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0; - im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; - im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; - im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3; - im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG; - im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2; - im->ddr.sdram_mode = CFG_DDR_MODE; - im->ddr.sdram_mode2 = CFG_DDR_MODE2; - im->ddr.sdram_interval = CFG_DDR_INTERVAL; - im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL; + im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS; + im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG; + im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0; + im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; + im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3; + im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG; + im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2; + im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE; + im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2; + im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL; + im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL; udelay(200); im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; @@ -271,14 +271,14 @@ phys_size_t initdram(int board_type) #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) extern void ddr_enable_ecc(unsigned int dram_size); #endif - volatile immap_t *im = (immap_t *)CFG_IMMR; + volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; u32 msize = 0; if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) return -1; /* DDR SDRAM - Main SODIMM */ - im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; + im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR; msize = fixed_sdram(); #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) @@ -300,28 +300,28 @@ int checkboard(void) static struct pci_region pci_regions[] = { { - .bus_start = CFG_PCI1_MEM_BASE, - .phys_start = CFG_PCI1_MEM_PHYS, - .size = CFG_PCI1_MEM_SIZE, + .bus_start = CONFIG_SYS_PCI1_MEM_BASE, + .phys_start = CONFIG_SYS_PCI1_MEM_PHYS, + .size = CONFIG_SYS_PCI1_MEM_SIZE, .flags = PCI_REGION_MEM | PCI_REGION_PREFETCH, }, { - .bus_start = CFG_PCI1_MMIO_BASE, - .phys_start = CFG_PCI1_MMIO_PHYS, - .size = CFG_PCI1_MMIO_SIZE, + .bus_start = CONFIG_SYS_PCI1_MMIO_BASE, + .phys_start = CONFIG_SYS_PCI1_MMIO_PHYS, + .size = CONFIG_SYS_PCI1_MMIO_SIZE, .flags = PCI_REGION_MEM, }, { - .bus_start = CFG_PCI1_IO_BASE, - .phys_start = CFG_PCI1_IO_PHYS, - .size = CFG_PCI1_IO_SIZE, + .bus_start = CONFIG_SYS_PCI1_IO_BASE, + .phys_start = CONFIG_SYS_PCI1_IO_PHYS, + .size = CONFIG_SYS_PCI1_IO_SIZE, .flags = PCI_REGION_IO, }, }; void pci_init_board(void) { - volatile immap_t *immr = (volatile immap_t *)CFG_IMMR; + volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR; volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk; volatile law83xx_t *pci_law = immr->sysconf.pcilaw; struct pci_region *reg[] = { pci_regions, }; @@ -338,10 +338,10 @@ void pci_init_board(void) udelay(2000); /* Configure PCI Local Access Windows */ - pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR; + pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR; pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB; - pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR; + pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR; pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB; mpc83xx_pci_init(1, reg, 0); diff --git a/board/freescale/mpc8360erdk/nand.c b/board/freescale/mpc8360erdk/nand.c index 8b44a0f38..8e22e138a 100644 --- a/board/freescale/mpc8360erdk/nand.c +++ b/board/freescale/mpc8360erdk/nand.c @@ -18,7 +18,7 @@ #include <linux/mtd/fsl_upm.h> #include <nand.h> -static struct immap *im = (struct immap *)CFG_IMMR; +static struct immap *im = (struct immap *)CONFIG_SYS_IMMR; static const u32 upm_array[] = { 0x0ff03c30, 0x0ff03c30, 0x0ff03c34, 0x0ff33c30, /* Words 0 to 3 */ @@ -70,7 +70,7 @@ static int dev_ready(void) static struct fsl_upm_nand fun = { .upm = { - .io_addr = (void *)CFG_NAND_BASE, + .io_addr = (void *)CONFIG_SYS_NAND_BASE, }, .width = 8, .upm_cmd_offset = 8, diff --git a/board/freescale/mpc837xemds/mpc837xemds.c b/board/freescale/mpc837xemds/mpc837xemds.c index 40f1e6328..acf8ada7b 100644 --- a/board/freescale/mpc837xemds/mpc837xemds.c +++ b/board/freescale/mpc837xemds/mpc837xemds.c @@ -15,16 +15,14 @@ #include <asm/io.h> #include <asm/fsl_serdes.h> #include <spd_sdram.h> -#if defined(CONFIG_OF_LIBFDT) +#include <tsec.h> #include <libfdt.h> -#endif -#if defined(CONFIG_PQ_MDS_PIB) +#include <fdt_support.h> #include "../common/pq-mds-pib.h" -#endif int board_early_init_f(void) { - u8 *bcsr = (u8 *)CFG_BCSR; + u8 *bcsr = (u8 *)CONFIG_SYS_BCSR; /* Enable flash write */ bcsr[0x9] &= ~0x04; @@ -32,7 +30,7 @@ int board_early_init_f(void) bcsr[0xe] = 0xff; #ifdef CONFIG_FSL_SERDES - immap_t *immr = (immap_t *)CFG_IMMR; + immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; u32 spridr = in_be32(&immr->sysconf.spridr); /* we check only part num, and don't look for CPU revisions */ @@ -44,7 +42,9 @@ int board_early_init_f(void) FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); break; case SPR_8378: - fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_PEX, + fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_SGMII, + FSL_SERDES_CLK_125, FSL_SERDES_VDD_1V); + fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX, FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); break; case SPR_8379: @@ -62,6 +62,125 @@ int board_early_init_f(void) return 0; } +#if defined(CONFIG_TSEC1) || defined(CONFIG_TSEC2) +int board_eth_init(bd_t *bd) +{ + struct tsec_info_struct tsec_info[2]; + struct immap __iomem *im = (struct immap __iomem *)CONFIG_SYS_IMMR; + u32 rcwh = in_be32(&im->reset.rcwh); + u32 tsec_mode; + int num = 0; + + /* New line after Net: */ + printf("\n"); + +#ifdef CONFIG_TSEC1 + SET_STD_TSEC_INFO(tsec_info[num], 1); + + printf(CONFIG_TSEC1_NAME ": "); + + tsec_mode = rcwh & HRCWH_TSEC1M_MASK; + if (tsec_mode == HRCWH_TSEC1M_IN_RGMII) { + printf("RGMII\n"); + /* this is default, no need to fixup */ + } else if (tsec_mode == HRCWH_TSEC1M_IN_SGMII) { + printf("SGMII\n"); + tsec_info[num].phyaddr = TSEC1_PHY_ADDR_SGMII; + tsec_info[num].flags = TSEC_GIGABIT; + } else { + printf("unsupported PHY type\n"); + } + num++; +#endif +#ifdef CONFIG_TSEC2 + SET_STD_TSEC_INFO(tsec_info[num], 2); + + printf(CONFIG_TSEC2_NAME ": "); + + tsec_mode = rcwh & HRCWH_TSEC2M_MASK; + if (tsec_mode == HRCWH_TSEC2M_IN_RGMII) { + printf("RGMII\n"); + /* this is default, no need to fixup */ + } else if (tsec_mode == HRCWH_TSEC2M_IN_SGMII) { + printf("SGMII\n"); + tsec_info[num].phyaddr = TSEC2_PHY_ADDR_SGMII; + tsec_info[num].flags = TSEC_GIGABIT; + } else { + printf("unsupported PHY type\n"); + } + num++; +#endif + return tsec_eth_init(bd, tsec_info, num); +} + +static void __ft_tsec_fixup(void *blob, bd_t *bd, const char *alias, + int phy_addr) +{ + const char *phy_type = "sgmii"; + const u32 *ph; + int off; + int err; + + off = fdt_path_offset(blob, alias); + if (off < 0) { + printf("WARNING: could not find %s alias: %s.\n", alias, + fdt_strerror(off)); + return; + } + + err = fdt_setprop(blob, off, "phy-connection-type", phy_type, + strlen(phy_type) + 1); + if (err) { + printf("WARNING: could not set phy-connection-type for %s: " + "%s.\n", alias, fdt_strerror(err)); + return; + } + + ph = (u32 *)fdt_getprop(blob, off, "phy-handle", 0); + if (!ph) { + printf("WARNING: could not get phy-handle for %s.\n", + alias); + return; + } + + off = fdt_node_offset_by_phandle(blob, *ph); + if (off < 0) { + printf("WARNING: could not get phy node for %s: %s\n", alias, + fdt_strerror(off)); + return; + } + + phy_addr = cpu_to_fdt32(phy_addr); + err = fdt_setprop(blob, off, "reg", &phy_addr, sizeof(phy_addr)); + if (err < 0) { + printf("WARNING: could not set phy node's reg for %s: " + "%s.\n", alias, fdt_strerror(err)); + return; + } +} + +static void ft_tsec_fixup(void *blob, bd_t *bd) +{ + struct immap __iomem *im = (struct immap __iomem *)CONFIG_SYS_IMMR; + u32 rcwh = in_be32(&im->reset.rcwh); + u32 tsec_mode; + +#ifdef CONFIG_TSEC1 + tsec_mode = rcwh & HRCWH_TSEC1M_MASK; + if (tsec_mode == HRCWH_TSEC1M_IN_SGMII) + __ft_tsec_fixup(blob, bd, "ethernet0", TSEC1_PHY_ADDR_SGMII); +#endif + +#ifdef CONFIG_TSEC2 + tsec_mode = rcwh & HRCWH_TSEC2M_MASK; + if (tsec_mode == HRCWH_TSEC2M_IN_SGMII) + __ft_tsec_fixup(blob, bd, "ethernet1", TSEC2_PHY_ADDR_SGMII); +#endif +} +#else +static inline void ft_tsec_fixup(void *blob, bd_t *bd) {} +#endif /* defined(CONFIG_TSEC1) || defined(CONFIG_TSEC2) */ + int board_early_init_r(void) { #ifdef CONFIG_PQ_MDS_PIB @@ -77,7 +196,7 @@ int fixed_sdram(void); phys_size_t initdram(int board_type) { - volatile immap_t *im = (immap_t *) CFG_IMMR; + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; u32 msize = 0; if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) @@ -104,43 +223,43 @@ phys_size_t initdram(int board_type) ************************************************************************/ int fixed_sdram(void) { - volatile immap_t *im = (immap_t *) CFG_IMMR; - u32 msize = CFG_DDR_SIZE * 1024 * 1024; + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; + u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024; u32 msize_log2 = __ilog2(msize); - im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE >> 12; + im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000; im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1); -#if (CFG_DDR_SIZE != 512) +#if (CONFIG_SYS_DDR_SIZE != 512) #warning Currenly any ddr size other than 512 is not supported #endif - im->sysconf.ddrcdr = CFG_DDRCDR_VALUE; + im->sysconf.ddrcdr = CONFIG_SYS_DDRCDR_VALUE; udelay(50000); - im->ddr.sdram_clk_cntl = CFG_DDR_SDRAM_CLK_CNTL; + im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_SDRAM_CLK_CNTL; udelay(1000); - im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS; - im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG; + im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS; + im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG; udelay(1000); - im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0; - im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; - im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; - im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3; - im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG; - im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2; - im->ddr.sdram_mode = CFG_DDR_MODE; - im->ddr.sdram_mode2 = CFG_DDR_MODE2; - im->ddr.sdram_interval = CFG_DDR_INTERVAL; + im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0; + im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; + im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3; + im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG; + im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2; + im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE; + im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2; + im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL; __asm__ __volatile__("sync"); udelay(1000); im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; udelay(2000); - return CFG_DDR_SIZE; + return CONFIG_SYS_DDR_SIZE; } -#endif /*!CFG_SPD_EEPROM */ +#endif /*!CONFIG_SYS_SPD_EEPROM */ int checkboard(void) { @@ -148,12 +267,55 @@ int checkboard(void) return 0; } +#ifdef CONFIG_PCI +int board_pci_host_broken(void) +{ + struct immap __iomem *im = (struct immap __iomem *)CONFIG_SYS_IMMR; + const u32 rcw_mask = HRCWH_PCI1_ARBITER_ENABLE | HRCWH_PCI_HOST; + const char *pci_ea = getenv("pci_external_arbiter"); + + /* It's always OK in case of external arbiter. */ + if (pci_ea && !strcmp(pci_ea, "yes")) + return 0; + + if ((in_be32(&im->reset.rcwh) & rcw_mask) != rcw_mask) + return 1; + + return 0; +} + +static void ft_pci_fixup(void *blob, bd_t *bd) +{ + const char *status = "broken (no arbiter)"; + int off; + int err; + + off = fdt_path_offset(blob, "pci0"); + if (off < 0) { + printf("WARNING: could not find pci0 alias: %s.\n", + fdt_strerror(off)); + return; + } + + err = fdt_setprop(blob, off, "status", status, strlen(status) + 1); + if (err) { + printf("WARNING: could not set status for pci0: %s.\n", + fdt_strerror(err)); + return; + } +} +#endif + #if defined(CONFIG_OF_BOARD_SETUP) void ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); + ft_tsec_fixup(blob, bd); + fdt_fixup_dr_usb(blob, bd); #ifdef CONFIG_PCI ft_pci_setup(blob, bd); + if (board_pci_host_broken()) + ft_pci_fixup(blob, bd); #endif } #endif /* CONFIG_OF_BOARD_SETUP */ diff --git a/board/freescale/mpc837xemds/pci.c b/board/freescale/mpc837xemds/pci.c index ab909790e..df4e748e9 100644 --- a/board/freescale/mpc837xemds/pci.c +++ b/board/freescale/mpc837xemds/pci.c @@ -21,41 +21,44 @@ #if defined(CONFIG_PCI) static struct pci_region pci_regions[] = { { - bus_start: CFG_PCI_MEM_BASE, - phys_start: CFG_PCI_MEM_PHYS, - size: CFG_PCI_MEM_SIZE, + bus_start: CONFIG_SYS_PCI_MEM_BASE, + phys_start: CONFIG_SYS_PCI_MEM_PHYS, + size: CONFIG_SYS_PCI_MEM_SIZE, flags: PCI_REGION_MEM | PCI_REGION_PREFETCH }, { - bus_start: CFG_PCI_MMIO_BASE, - phys_start: CFG_PCI_MMIO_PHYS, - size: CFG_PCI_MMIO_SIZE, + bus_start: CONFIG_SYS_PCI_MMIO_BASE, + phys_start: CONFIG_SYS_PCI_MMIO_PHYS, + size: CONFIG_SYS_PCI_MMIO_SIZE, flags: PCI_REGION_MEM }, { - bus_start: CFG_PCI_IO_BASE, - phys_start: CFG_PCI_IO_PHYS, - size: CFG_PCI_IO_SIZE, + bus_start: CONFIG_SYS_PCI_IO_BASE, + phys_start: CONFIG_SYS_PCI_IO_PHYS, + size: CONFIG_SYS_PCI_IO_SIZE, flags: PCI_REGION_IO } }; void pci_init_board(void) { - volatile immap_t *immr = (volatile immap_t *)CFG_IMMR; + volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR; volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk; volatile law83xx_t *pci_law = immr->sysconf.pcilaw; struct pci_region *reg[] = { pci_regions }; + if (board_pci_host_broken()) + return; + /* Enable all 5 PCI_CLK_OUTPUTS */ clk->occr |= 0xf8000000; udelay(2000); /* Configure PCI Local Access Windows */ - pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR; + pci_law[0].bar = CONFIG_SYS_PCI_MEM_PHYS & LAWBAR_BAR; pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB; - pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR; + pci_law[1].bar = CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR; pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB; udelay(2000); diff --git a/board/freescale/mpc837xerdb/mpc837xerdb.c b/board/freescale/mpc837xerdb/mpc837xerdb.c index aaefc1899..318a3dce7 100644 --- a/board/freescale/mpc837xerdb/mpc837xerdb.c +++ b/board/freescale/mpc837xerdb/mpc837xerdb.c @@ -20,17 +20,17 @@ #include <spd_sdram.h> #include <vsc7385.h> -#if defined(CFG_DRAM_TEST) +#if defined(CONFIG_SYS_DRAM_TEST) int testdram(void) { - uint *pstart = (uint *) CFG_MEMTEST_START; - uint *pend = (uint *) CFG_MEMTEST_END; + uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START; + uint *pend = (uint *) CONFIG_SYS_MEMTEST_END; uint *p; printf("Testing DRAM from 0x%08x to 0x%08x\n", - CFG_MEMTEST_START, - CFG_MEMTEST_END); + CONFIG_SYS_MEMTEST_START, + CONFIG_SYS_MEMTEST_END); printf("DRAM test phase 1:\n"); for (p = pstart; p < pend; p++) @@ -66,7 +66,7 @@ int fixed_sdram(void); phys_size_t initdram(int board_type) { - immap_t *im = (immap_t *) CFG_IMMR; + immap_t *im = (immap_t *) CONFIG_SYS_IMMR; u32 msize = 0; if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) @@ -92,40 +92,40 @@ phys_size_t initdram(int board_type) ************************************************************************/ int fixed_sdram(void) { - immap_t *im = (immap_t *) CFG_IMMR; - u32 msize = CFG_DDR_SIZE * 1024 * 1024; + immap_t *im = (immap_t *) CONFIG_SYS_IMMR; + u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024; u32 msize_log2 = __ilog2(msize); - im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE >> 12; + im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000; im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1); - im->sysconf.ddrcdr = CFG_DDRCDR_VALUE; + im->sysconf.ddrcdr = CONFIG_SYS_DDRCDR_VALUE; udelay(50000); - im->ddr.sdram_clk_cntl = CFG_DDR_SDRAM_CLK_CNTL; + im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_SDRAM_CLK_CNTL; udelay(1000); - im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS; - im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG; + im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS; + im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG; udelay(1000); - im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0; - im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; - im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; - im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3; - im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG; - im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2; - im->ddr.sdram_mode = CFG_DDR_MODE; - im->ddr.sdram_mode2 = CFG_DDR_MODE2; - im->ddr.sdram_interval = CFG_DDR_INTERVAL; + im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0; + im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; + im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3; + im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG; + im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2; + im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE; + im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2; + im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL; sync(); udelay(1000); im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; udelay(2000); - return CFG_DDR_SIZE; + return CONFIG_SYS_DDR_SIZE; } -#endif /*!CFG_SPD_EEPROM */ +#endif /*!CONFIG_SYS_SPD_EEPROM */ int checkboard(void) { @@ -136,7 +136,7 @@ int checkboard(void) int board_early_init_f(void) { #ifdef CONFIG_FSL_SERDES - immap_t *immr = (immap_t *)CFG_IMMR; + immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; u32 spridr = in_be32(&immr->sysconf.spridr); /* we check only part num, and don't look for CPU revisions */ @@ -148,7 +148,7 @@ int board_early_init_f(void) FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); break; case SPR_8378: - fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_PEX, + fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX, FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); break; case SPR_8379: diff --git a/board/freescale/mpc837xerdb/pci.c b/board/freescale/mpc837xerdb/pci.c index 26e732028..8bb31fc74 100644 --- a/board/freescale/mpc837xerdb/pci.c +++ b/board/freescale/mpc837xerdb/pci.c @@ -17,28 +17,28 @@ #if defined(CONFIG_PCI) static struct pci_region pci_regions[] = { { - bus_start: CFG_PCI_MEM_BASE, - phys_start: CFG_PCI_MEM_PHYS, - size: CFG_PCI_MEM_SIZE, + bus_start: CONFIG_SYS_PCI_MEM_BASE, + phys_start: CONFIG_SYS_PCI_MEM_PHYS, + size: CONFIG_SYS_PCI_MEM_SIZE, flags: PCI_REGION_MEM | PCI_REGION_PREFETCH }, { - bus_start: CFG_PCI_MMIO_BASE, - phys_start: CFG_PCI_MMIO_PHYS, - size: CFG_PCI_MMIO_SIZE, + bus_start: CONFIG_SYS_PCI_MMIO_BASE, + phys_start: CONFIG_SYS_PCI_MMIO_PHYS, + size: CONFIG_SYS_PCI_MMIO_SIZE, flags: PCI_REGION_MEM }, { - bus_start: CFG_PCI_IO_BASE, - phys_start: CFG_PCI_IO_PHYS, - size: CFG_PCI_IO_SIZE, + bus_start: CONFIG_SYS_PCI_IO_BASE, + phys_start: CONFIG_SYS_PCI_IO_PHYS, + size: CONFIG_SYS_PCI_IO_SIZE, flags: PCI_REGION_IO } }; void pci_init_board(void) { - volatile immap_t *immr = (volatile immap_t *)CFG_IMMR; + volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR; volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk; volatile law83xx_t *pci_law = immr->sysconf.pcilaw; struct pci_region *reg[] = { pci_regions }; @@ -48,10 +48,10 @@ void pci_init_board(void) udelay(2000); /* Configure PCI Local Access Windows */ - pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR; + pci_law[0].bar = CONFIG_SYS_PCI_MEM_PHYS & LAWBAR_BAR; pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB; - pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR; + pci_law[1].bar = CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR; pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB; mpc83xx_pci_init(1, reg, 0); diff --git a/board/freescale/mpc8536ds/ddr.c b/board/freescale/mpc8536ds/ddr.c index 2e88c7933..3135d6dfe 100644 --- a/board/freescale/mpc8536ds/ddr.c +++ b/board/freescale/mpc8536ds/ddr.c @@ -10,6 +10,7 @@ #include <i2c.h> #include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_ddr_dimm_params.h> static void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) { @@ -36,7 +37,9 @@ void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, } } -void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num) +void fsl_ddr_board_options(memctl_options_t *popts, + dimm_params_t *pdimm, + unsigned int ctrl_num) { /* * Factors to consider for clock adjust: diff --git a/board/freescale/mpc8536ds/law.c b/board/freescale/mpc8536ds/law.c index cdf5215fc..0861fa708 100644 --- a/board/freescale/mpc8536ds/law.c +++ b/board/freescale/mpc8536ds/law.c @@ -28,16 +28,17 @@ #include <asm/mmu.h> struct law_entry law_table[] = { - SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI), - SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI), - SET_LAW(CFG_FLASH_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC), - SET_LAW(CFG_PCIE1_MEM_PHYS, LAWAR_SIZE_128M, LAW_TRGT_IF_PCIE_1), - SET_LAW(CFG_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1), - SET_LAW(CFG_PCIE2_MEM_PHYS, LAWAR_SIZE_128M, LAW_TRGT_IF_PCIE_2), - SET_LAW(CFG_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2), - SET_LAW(CFG_PCIE3_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_3), - SET_LAW(CFG_PCIE3_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_3), + SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI), + SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI), + SET_LAW(CONFIG_SYS_FLASH_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC), + SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAWAR_SIZE_128M, LAW_TRGT_IF_PCIE_1), + SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1), + SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAWAR_SIZE_128M, LAW_TRGT_IF_PCIE_2), + SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2), + SET_LAW(CONFIG_SYS_PCIE3_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_3), + SET_LAW(CONFIG_SYS_PCIE3_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_3), SET_LAW(PIXIS_BASE, LAW_SIZE_4K, LAW_TRGT_IF_LBC), + SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC), }; int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c index 8216c70ca..2b17612b3 100644 --- a/board/freescale/mpc8536ds/mpc8536ds.c +++ b/board/freescale/mpc8536ds/mpc8536ds.c @@ -25,6 +25,7 @@ #include <pci.h> #include <asm/processor.h> #include <asm/mmu.h> +#include <asm/cache.h> #include <asm/immap_85xx.h> #include <asm/immap_fsl_pci.h> #include <asm/fsl_ddr_sdram.h> @@ -34,12 +35,11 @@ #include <libfdt.h> #include <spd_sdram.h> #include <fdt_support.h> +#include <tsec.h> +#include <netdev.h> #include "../common/pixis.h" - -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) -extern void ddr_enable_ecc(unsigned int dram_size); -#endif +#include "../common/sgmii_riser.h" phys_size_t fixed_sdram(void); @@ -61,20 +61,12 @@ initdram(int board_type) #ifdef CONFIG_SPD_EEPROM dram_size = fsl_ddr_sdram(); - - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - - dram_size *= 0x100000; #else dram_size = fixed_sdram(); #endif + dram_size = setup_ddr_tlbs(dram_size / 0x100000); + dram_size *= 0x100000; -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - /* - * Initialize and enable DDR ECC. - */ - ddr_enable_ecc(dram_size); -#endif puts(" DDR: "); return dram_size; } @@ -86,34 +78,34 @@ initdram(int board_type) phys_size_t fixed_sdram (void) { - volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; volatile ccsr_ddr_t *ddr= &immap->im_ddr; uint d_init; - ddr->cs0_bnds = CFG_DDR_CS0_BNDS; - ddr->cs0_config = CFG_DDR_CS0_CONFIG; + ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS; + ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG; - ddr->timing_cfg_3 = CFG_DDR_TIMING_3; - ddr->timing_cfg_0 = CFG_DDR_TIMING_0; - ddr->timing_cfg_1 = CFG_DDR_TIMING_1; - ddr->timing_cfg_2 = CFG_DDR_TIMING_2; - ddr->sdram_mode = CFG_DDR_MODE_1; - ddr->sdram_mode_2 = CFG_DDR_MODE_2; - ddr->sdram_interval = CFG_DDR_INTERVAL; - ddr->sdram_data_init = CFG_DDR_DATA_INIT; - ddr->sdram_clk_cntl = CFG_DDR_CLK_CTRL; - ddr->sdram_cfg_2 = CFG_DDR_CONTROL2; + ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3; + ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0; + ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; + ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; + ddr->sdram_mode = CONFIG_SYS_DDR_MODE_1; + ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2; + ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL; + ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT; + ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL; + ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL2; #if defined (CONFIG_DDR_ECC) - ddr->err_int_en = CFG_DDR_ERR_INT_EN; - ddr->err_disable = CFG_DDR_ERR_DIS; - ddr->err_sbe = CFG_DDR_SBE; + ddr->err_int_en = CONFIG_SYS_DDR_ERR_INT_EN; + ddr->err_disable = CONFIG_SYS_DDR_ERR_DIS; + ddr->err_sbe = CONFIG_SYS_DDR_SBE; #endif asm("sync;isync"); udelay(500); - ddr->sdram_cfg = CFG_DDR_CONTROL; + ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL; #if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) d_init = 1; @@ -151,12 +143,15 @@ static struct pci_controller pcie2_hose; static struct pci_controller pcie3_hose; #endif +extern int fsl_pci_setup_inbound_windows(struct pci_region *r); +extern void fsl_pci_init(struct pci_controller *hose); + int first_free_busno=0; void pci_init_board(void) { - volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); uint devdisr = gur->devdisr; uint sdrs2_io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_SRDS2_IO_SEL) >> 27; @@ -176,11 +171,11 @@ pci_init_board(void) #ifdef CONFIG_PCIE3 { - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE3_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR; struct pci_controller *hose = &pcie3_hose; int pcie_ep = (host_agent == 1); int pcie_configured = (io_sel == 7); + struct pci_region *r = hose->regions; if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ printf ("\n PCIE3 connected to Slot3 as %s (base address %x)", @@ -193,27 +188,23 @@ pci_init_board(void) printf ("\n"); /* inbound */ - pci_set_region(hose->regions + 0, - CFG_PCI_MEMORY_BUS, - CFG_PCI_MEMORY_PHYS, - CFG_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, - CFG_PCIE3_MEM_BASE, - CFG_PCIE3_MEM_PHYS, - CFG_PCIE3_MEM_SIZE, + pci_set_region(r++, + CONFIG_SYS_PCIE3_MEM_BASE, + CONFIG_SYS_PCIE3_MEM_PHYS, + CONFIG_SYS_PCIE3_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, - CFG_PCIE3_IO_BASE, - CFG_PCIE3_IO_PHYS, - CFG_PCIE3_IO_SIZE, + pci_set_region(r++, + CONFIG_SYS_PCIE3_IO_BASE, + CONFIG_SYS_PCIE3_IO_PHYS, + CONFIG_SYS_PCIE3_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; + hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); @@ -234,12 +225,12 @@ pci_init_board(void) #ifdef CONFIG_PCIE1 { - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR; struct pci_controller *hose = &pcie1_hose; int pcie_ep = (host_agent == 5); int pcie_configured = (io_sel == 2 || io_sel == 3 || io_sel == 5 || io_sel == 7); + struct pci_region *r = hose->regions; if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ printf ("\n PCIE1 connected to Slot1 as %s (base address %x)", @@ -252,36 +243,31 @@ pci_init_board(void) printf ("\n"); /* inbound */ - pci_set_region(hose->regions + 0, - CFG_PCI_MEMORY_BUS, - CFG_PCI_MEMORY_PHYS, - CFG_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, - CFG_PCIE1_MEM_BASE, - CFG_PCIE1_MEM_PHYS, - CFG_PCIE1_MEM_SIZE, + pci_set_region(r++, + CONFIG_SYS_PCIE1_MEM_BASE, + CONFIG_SYS_PCIE1_MEM_PHYS, + CONFIG_SYS_PCIE1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, - CFG_PCIE1_IO_BASE, - CFG_PCIE1_IO_PHYS, - CFG_PCIE1_IO_SIZE, + pci_set_region(r++, + CONFIG_SYS_PCIE1_IO_BASE, + CONFIG_SYS_PCIE1_IO_PHYS, + CONFIG_SYS_PCIE1_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; -#ifdef CFG_PCIE1_MEM_BASE2 +#ifdef CONFIG_SYS_PCIE1_MEM_BASE2 /* outbound memory */ - pci_set_region(hose->regions + 3, - CFG_PCIE1_MEM_BASE2, - CFG_PCIE1_MEM_PHYS2, - CFG_PCIE1_MEM_SIZE2, + pci_set_region(r++, + CONFIG_SYS_PCIE1_MEM_BASE2, + CONFIG_SYS_PCIE1_MEM_PHYS2, + CONFIG_SYS_PCIE1_MEM_SIZE2, PCI_REGION_MEM); - hose->region_count++; #endif + hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); @@ -303,11 +289,11 @@ pci_init_board(void) #ifdef CONFIG_PCIE2 { - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE2_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR; struct pci_controller *hose = &pcie2_hose; int pcie_ep = (host_agent == 3); int pcie_configured = (io_sel == 5 || io_sel == 7); + struct pci_region *r = hose->regions; if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ printf ("\n PCIE2 connected to Slot 2 as %s (base address %x)", @@ -320,36 +306,31 @@ pci_init_board(void) printf ("\n"); /* inbound */ - pci_set_region(hose->regions + 0, - CFG_PCI_MEMORY_BUS, - CFG_PCI_MEMORY_PHYS, - CFG_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, - CFG_PCIE2_MEM_BASE, - CFG_PCIE2_MEM_PHYS, - CFG_PCIE2_MEM_SIZE, + pci_set_region(r++, + CONFIG_SYS_PCIE2_MEM_BASE, + CONFIG_SYS_PCIE2_MEM_PHYS, + CONFIG_SYS_PCIE2_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, - CFG_PCIE2_IO_BASE, - CFG_PCIE2_IO_PHYS, - CFG_PCIE2_IO_SIZE, + pci_set_region(r++, + CONFIG_SYS_PCIE2_IO_BASE, + CONFIG_SYS_PCIE2_IO_PHYS, + CONFIG_SYS_PCIE2_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; -#ifdef CFG_PCIE2_MEM_BASE2 +#ifdef CONFIG_SYS_PCIE2_MEM_BASE2 /* outbound memory */ - pci_set_region(hose->regions + 3, - CFG_PCIE2_MEM_BASE2, - CFG_PCIE2_MEM_PHYS2, - CFG_PCIE2_MEM_SIZE2, + pci_set_region(r++, + CONFIG_SYS_PCIE2_MEM_BASE2, + CONFIG_SYS_PCIE2_MEM_PHYS2, + CONFIG_SYS_PCIE2_MEM_SIZE2, PCI_REGION_MEM); - hose->region_count++; #endif + hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); @@ -370,9 +351,9 @@ pci_init_board(void) #ifdef CONFIG_PCI1 { - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR; struct pci_controller *hose = &pci1_hose; + struct pci_region *r = hose->regions; uint pci_agent = (host_agent == 6); uint pci_speed = 66666000; /*get_clock_freq (); PCI PSPEED in [4:5] */ @@ -393,35 +374,31 @@ pci_init_board(void) ); /* inbound */ - pci_set_region(hose->regions + 0, - CFG_PCI_MEMORY_BUS, - CFG_PCI_MEMORY_PHYS, - CFG_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, - CFG_PCI1_MEM_BASE, - CFG_PCI1_MEM_PHYS, - CFG_PCI1_MEM_SIZE, + pci_set_region(r++, + CONFIG_SYS_PCI1_MEM_BASE, + CONFIG_SYS_PCI1_MEM_PHYS, + CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, - CFG_PCI1_IO_BASE, - CFG_PCI1_IO_PHYS, - CFG_PCI1_IO_SIZE, + pci_set_region(r++, + CONFIG_SYS_PCI1_IO_BASE, + CONFIG_SYS_PCI1_IO_PHYS, + CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; -#ifdef CFG_PCI1_MEM_BASE2 + +#ifdef CONFIG_SYS_PCI1_MEM_BASE2 /* outbound memory */ - pci_set_region(hose->regions + 3, - CFG_PCI1_MEM_BASE2, - CFG_PCI1_MEM_PHYS2, - CFG_PCI1_MEM_SIZE2, + pci_set_region(r++, + CONFIG_SYS_PCI1_MEM_BASE2, + CONFIG_SYS_PCI1_MEM_PHYS2, + CONFIG_SYS_PCI1_MEM_SIZE2, PCI_REGION_MEM); - hose->region_count++; #endif + hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); @@ -441,8 +418,7 @@ pci_init_board(void) int board_early_init_r(void) { - unsigned int i; - const unsigned int flashbase = CFG_FLASH_BASE; + const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; const u8 flash_esel = 1; /* @@ -450,11 +426,9 @@ int board_early_init_r(void) * so that flash can be erased properly. */ - /* Invalidate any remaining lines of the flash from caches. */ - for (i = 0; i < 256*1024*1024; i+=32) { - asm volatile ("dcbi %0,%1": : "b" (flashbase), "r" (i)); - asm volatile ("icbi %0,%1": : "b" (flashbase), "r" (i)); - } + /* Flush d-cache and invalidate i-cache of any FLASH data */ + flush_dcache(); + invalidate_icache(); /* invalidate existing TLB entry for flash + promjet */ disable_tlb(flash_esel); @@ -608,46 +582,75 @@ get_board_ddr_clk(ulong dummy) } #endif -#if defined(CONFIG_OF_BOARD_SETUP) -void -ft_board_setup(void *blob, bd_t *bd) +int is_sata_supported(void) +{ + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + uint sdrs2_io_sel = + (gur->pordevsr & MPC85xx_PORDEVSR_SRDS2_IO_SEL) >> 27; + if (sdrs2_io_sel & 0x04) + return 0; + + return 1; +} + +int board_eth_init(bd_t *bis) { - int node, tmp[2]; - const char *path; +#ifdef CONFIG_TSEC_ENET + struct tsec_info_struct tsec_info[2]; + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + int num = 0; + uint sdrs2_io_sel = + (gur->pordevsr & MPC85xx_PORDEVSR_SRDS2_IO_SEL) >> 27; +#ifdef CONFIG_TSEC1 + SET_STD_TSEC_INFO(tsec_info[num], 1); + if ((sdrs2_io_sel == 4) || (sdrs2_io_sel == 6)) { + tsec_info[num].phyaddr = 0; + tsec_info[num].flags |= TSEC_SGMII; + } + num++; +#endif +#ifdef CONFIG_TSEC3 + SET_STD_TSEC_INFO(tsec_info[num], 3); + if (sdrs2_io_sel == 4) { + tsec_info[num].phyaddr = 1; + tsec_info[num].flags |= TSEC_SGMII; + } + num++; +#endif + + if (!num) { + printf("No TSECs initialized\n"); + return 0; + } + + if ((sdrs2_io_sel == 4) || (sdrs2_io_sel == 6)) + fsl_sgmii_riser_init(tsec_info, num); + + tsec_eth_init(bis, tsec_info, num); +#endif + return pci_eth_init(bis); +} + +#if defined(CONFIG_OF_BOARD_SETUP) +extern void ft_fsl_pci_setup(void *blob, const char *pci_alias, + struct pci_controller *hose); + +void ft_board_setup(void *blob, bd_t *bd) +{ ft_cpu_setup(blob, bd); - node = fdt_path_offset(blob, "/aliases"); - tmp[0] = 0; - if (node >= 0) { #ifdef CONFIG_PCI1 - path = fdt_getprop(blob, node, "pci0", NULL); - if (path) { - tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + ft_fsl_pci_setup(blob, "pci0", &pci1_hose); #endif #ifdef CONFIG_PCIE2 - path = fdt_getprop(blob, node, "pci1", NULL); - if (path) { - tmp[1] = pcie2_hose.last_busno - pcie2_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + ft_fsl_pci_setup(blob, "pci1", &pcie2_hose); #endif -#ifdef CONFIG_PCIE1 - path = fdt_getprop(blob, node, "pci2", NULL); - if (path) { - tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } +#ifdef CONFIG_PCIE2 + ft_fsl_pci_setup(blob, "pci2", &pcie1_hose); #endif -#ifdef CONFIG_PCIE3 - path = fdt_getprop(blob, node, "pci3", NULL); - if (path) { - tmp[1] = pcie3_hose.last_busno - pcie3_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } +#ifdef CONFIG_PCIE1 + ft_fsl_pci_setup(blob, "pci3", &pcie3_hose); #endif - } } #endif diff --git a/board/freescale/mpc8536ds/tlb.c b/board/freescale/mpc8536ds/tlb.c index 28a9fa87f..c81a95922 100644 --- a/board/freescale/mpc8536ds/tlb.c +++ b/board/freescale/mpc8536ds/tlb.c @@ -28,16 +28,16 @@ struct fsl_e_tlb_entry tlb_table[] = { /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), @@ -47,25 +47,30 @@ struct fsl_e_tlb_entry tlb_table[] = { /* TLB 1 */ /* *I*G* - CCSRBAR */ - SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS, + SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 0, BOOKE_PAGESZ_1M, 1), /* W**G* - Flash/promjet, localbus */ /* This will be changed to *I*G* after relocation to RAM. */ - SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_W|MAS2_G, + SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE, + MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, 0, 1, BOOKE_PAGESZ_256M, 1), /* *I*G* - PCI */ - SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS, + SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 2, BOOKE_PAGESZ_1G, 1), /* *I*G* - PCI I/O */ - SET_TLB_ENTRY(1, CFG_PCI1_IO_PHYS, CFG_PCI1_IO_PHYS, + SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_IO_PHYS, CONFIG_SYS_PCI1_IO_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 3, BOOKE_PAGESZ_256K, 1), + + /* *I*G - NAND */ + SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 4, BOOKE_PAGESZ_1M, 1), }; int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/freescale/mpc8540ads/ddr.c b/board/freescale/mpc8540ads/ddr.c index 45372f427..7850794d6 100644 --- a/board/freescale/mpc8540ads/ddr.c +++ b/board/freescale/mpc8540ads/ddr.c @@ -10,6 +10,7 @@ #include <i2c.h> #include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_ddr_dimm_params.h> static void get_spd(ddr1_spd_eeprom_t *spd, unsigned char i2c_address) @@ -40,7 +41,9 @@ fsl_ddr_get_spd(ddr1_spd_eeprom_t *ctrl_dimms_spd, } } -void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num) +void fsl_ddr_board_options(memctl_options_t *popts, + dimm_params_t *pdimm, + unsigned int ctrl_num) { /* * Factors to consider for CPO: diff --git a/board/freescale/mpc8540ads/law.c b/board/freescale/mpc8540ads/law.c index 3b8bd05ad..7dd8f2958 100644 --- a/board/freescale/mpc8540ads/law.c +++ b/board/freescale/mpc8540ads/law.c @@ -46,13 +46,13 @@ struct law_entry law_table[] = { #ifndef CONFIG_SPD_EEPROM - SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR), + SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR), #endif - SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI), + SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI), /* This is not so much the SDRAM map as it is the whole localbus map. */ - SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC), - SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI), - SET_LAW(CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO), + SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC), + SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI), + SET_LAW(CONFIG_SYS_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO), }; int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/mpc8540ads/mpc8540ads.c b/board/freescale/mpc8540ads/mpc8540ads.c index 005e4d97e..a0b6fbd12 100644 --- a/board/freescale/mpc8540ads/mpc8540ads.c +++ b/board/freescale/mpc8540ads/mpc8540ads.c @@ -71,7 +71,7 @@ initdram(int board_type) #if defined(CONFIG_DDR_DLL) { - volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); uint temp_ddrdll = 0; /* @@ -116,8 +116,8 @@ initdram(int board_type) void local_bus_init(void) { - volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR); + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); uint clkdiv; uint lbc_hz; @@ -127,8 +127,8 @@ local_bus_init(void) * Errata LBC11. * Fix Local Bus clock glitch when DLL is enabled. * - * If localbus freq is < 66Mhz, DLL bypass mode must be used. - * If localbus freq is > 133Mhz, DLL can be safely enabled. + * If localbus freq is < 66MHz, DLL bypass mode must be used. + * If localbus freq is > 133MHz, DLL can be safely enabled. * Between 66 and 133, the DLL is enabled with an override workaround. */ @@ -137,10 +137,10 @@ local_bus_init(void) lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; if (lbc_hz < 66) { - lbc->lcrr = CFG_LBC_LCRR | 0x80000000; /* DLL Bypass */ + lbc->lcrr = CONFIG_SYS_LBC_LCRR | 0x80000000; /* DLL Bypass */ } else if (lbc_hz >= 133) { - lbc->lcrr = CFG_LBC_LCRR & (~0x80000000); /* DLL Enabled */ + lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~0x80000000); /* DLL Enabled */ } else { /* @@ -155,7 +155,7 @@ local_bus_init(void) lbc->lcrr = 0x10000004; } - lbc->lcrr = CFG_LBC_LCRR & (~0x80000000); /* DLL Enabled */ + lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~0x80000000); /* DLL Enabled */ udelay(200); /* @@ -176,52 +176,52 @@ local_bus_init(void) void sdram_init(void) { - volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR); - uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE; + volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; puts(" SDRAM: "); - print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); + print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); /* * Setup SDRAM Base and Option Registers */ - lbc->or2 = CFG_OR2_PRELIM; - lbc->br2 = CFG_BR2_PRELIM; - lbc->lbcr = CFG_LBC_LBCR; + lbc->or2 = CONFIG_SYS_OR2_PRELIM; + lbc->br2 = CONFIG_SYS_BR2_PRELIM; + lbc->lbcr = CONFIG_SYS_LBC_LBCR; asm("msync"); - lbc->lsrt = CFG_LBC_LSRT; - lbc->mrtpr = CFG_LBC_MRTPR; + lbc->lsrt = CONFIG_SYS_LBC_LSRT; + lbc->mrtpr = CONFIG_SYS_LBC_MRTPR; asm("sync"); /* * Configure the SDRAM controller. */ - lbc->lsdmr = CFG_LBC_LSDMR_1; + lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1; asm("sync"); *sdram_addr = 0xff; ppcDcbf((unsigned long) sdram_addr); udelay(100); - lbc->lsdmr = CFG_LBC_LSDMR_2; + lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2; asm("sync"); *sdram_addr = 0xff; ppcDcbf((unsigned long) sdram_addr); udelay(100); - lbc->lsdmr = CFG_LBC_LSDMR_3; + lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_3; asm("sync"); *sdram_addr = 0xff; ppcDcbf((unsigned long) sdram_addr); udelay(100); - lbc->lsdmr = CFG_LBC_LSDMR_4; + lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4; asm("sync"); *sdram_addr = 0xff; ppcDcbf((unsigned long) sdram_addr); udelay(100); - lbc->lsdmr = CFG_LBC_LSDMR_5; + lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; asm("sync"); *sdram_addr = 0xff; ppcDcbf((unsigned long) sdram_addr); @@ -234,15 +234,15 @@ sdram_init(void) ************************************************************************/ long int fixed_sdram (void) { - #ifndef CFG_RAMBOOT - volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR); - - ddr->cs0_bnds = CFG_DDR_CS0_BNDS; - ddr->cs0_config = CFG_DDR_CS0_CONFIG; - ddr->timing_cfg_1 = CFG_DDR_TIMING_1; - ddr->timing_cfg_2 = CFG_DDR_TIMING_2; - ddr->sdram_mode = CFG_DDR_MODE; - ddr->sdram_interval = CFG_DDR_INTERVAL; + #ifndef CONFIG_SYS_RAMBOOT + volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); + + ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS; + ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG; + ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; + ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; + ddr->sdram_mode = CONFIG_SYS_DDR_MODE; + ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL; #if defined (CONFIG_DDR_ECC) ddr->err_disable = 0x0000000D; ddr->err_sbe = 0x00ff0000; @@ -251,14 +251,14 @@ long int fixed_sdram (void) udelay(500); #if defined (CONFIG_DDR_ECC) /* Enable ECC checking */ - ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000); + ddr->sdram_cfg = (CONFIG_SYS_DDR_CONTROL | 0x20000000); #else - ddr->sdram_cfg = CFG_DDR_CONTROL; + ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL; #endif asm("sync; isync; msync"); udelay(500); #endif - return CFG_SDRAM_SIZE * 1024 * 1024; + return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; } #endif /* !defined(CONFIG_SPD_EEPROM) */ diff --git a/board/freescale/mpc8540ads/tlb.c b/board/freescale/mpc8540ads/tlb.c index 4fe2862f7..2ec3ccce9 100644 --- a/board/freescale/mpc8540ads/tlb.c +++ b/board/freescale/mpc8540ads/tlb.c @@ -28,16 +28,16 @@ struct fsl_e_tlb_entry tlb_table[] = { /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), @@ -46,7 +46,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * 0xff000000 16M FLASH * Out of reset this entry is only 4K. */ - SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE, + SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 0, BOOKE_PAGESZ_16M, 1), @@ -54,7 +54,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * TLB 1: 256M Non-cacheable, guarded * 0x80000000 256M PCI1 MEM First half */ - SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS, + SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 1, BOOKE_PAGESZ_256M, 1), @@ -62,7 +62,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * TLB 2: 256M Non-cacheable, guarded * 0x90000000 256M PCI1 MEM Second half */ - SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS + 0x10000000, CFG_PCI1_MEM_PHYS + 0x10000000, + SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 2, BOOKE_PAGESZ_256M, 1), @@ -70,7 +70,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * TLB 3: 256M Non-cacheable, guarded * 0xc0000000 256M Rapid IO MEM First half */ - SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE, CFG_RIO_MEM_BASE, + SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BASE, CONFIG_SYS_RIO_MEM_BASE, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 3, BOOKE_PAGESZ_256M, 1), @@ -78,7 +78,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * TLB 4: 256M Non-cacheable, guarded * 0xd0000000 256M Rapid IO MEM Second half */ - SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE + 0x10000000, CFG_RIO_MEM_BASE + 0x10000000, + SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BASE + 0x10000000, CONFIG_SYS_RIO_MEM_BASE + 0x10000000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 4, BOOKE_PAGESZ_256M, 1), @@ -87,7 +87,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * 0xe000_0000 1M CCSRBAR * 0xe200_0000 16M PCI1 IO */ - SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS, + SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 5, BOOKE_PAGESZ_64M, 1), @@ -95,7 +95,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * TLB 6: 64M Cacheable, non-guarded * 0xf000_0000 64M LBC SDRAM */ - SET_TLB_ENTRY(1, CFG_LBC_SDRAM_BASE, CFG_LBC_SDRAM_BASE, + SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, CONFIG_SYS_LBC_SDRAM_BASE, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 6, BOOKE_PAGESZ_64M, 1), @@ -103,7 +103,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * TLB 7: 16K Non-cacheable, guarded * 0xf8000000 16K BCSR registers */ - SET_TLB_ENTRY(1, CFG_BCSR, CFG_BCSR, + SET_TLB_ENTRY(1, CONFIG_SYS_BCSR, CONFIG_SYS_BCSR, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 7, BOOKE_PAGESZ_16K, 1), @@ -117,11 +117,11 @@ struct fsl_e_tlb_entry tlb_table[] = { * Likely it needs to be increased by two for these entries. */ #error("Update the number of table entries in tlb1_entry") - SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE, CFG_DDR_SDRAM_BASE, + SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 8, BOOKE_PAGESZ_64M, 1), - SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE + 0x4000000, CFG_DDR_SDRAM_BASE + 0x4000000, + SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 9, BOOKE_PAGESZ_64M, 1), #endif diff --git a/board/freescale/mpc8541cds/ddr.c b/board/freescale/mpc8541cds/ddr.c index 11ce57d36..c84a6cbe1 100644 --- a/board/freescale/mpc8541cds/ddr.c +++ b/board/freescale/mpc8541cds/ddr.c @@ -10,6 +10,7 @@ #include <i2c.h> #include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_ddr_dimm_params.h> static void get_spd(ddr1_spd_eeprom_t *spd, unsigned char i2c_address) @@ -36,7 +37,9 @@ void fsl_ddr_get_spd(ddr1_spd_eeprom_t *ctrl_dimms_spd, } } -void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num) +void fsl_ddr_board_options(memctl_options_t *popts, + dimm_params_t *pdimm, + unsigned int ctrl_num) { /* * Factors to consider for clock adjust: diff --git a/board/freescale/mpc8541cds/law.c b/board/freescale/mpc8541cds/law.c index fbf2bdc07..8e3de22a4 100644 --- a/board/freescale/mpc8541cds/law.c +++ b/board/freescale/mpc8541cds/law.c @@ -47,12 +47,12 @@ */ struct law_entry law_table[] = { - SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI), - SET_LAW(CFG_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2), - SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI), - SET_LAW(CFG_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2), + SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI), + SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2), + SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI), + SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2), /* LBC window - maps 256M 0xf0000000 -> 0xffffffff */ - SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC), + SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC), }; int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/mpc8541cds/mpc8541cds.c b/board/freescale/mpc8541cds/mpc8541cds.c index de3a79151..7e40c5c80 100644 --- a/board/freescale/mpc8541cds/mpc8541cds.c +++ b/board/freescale/mpc8541cds/mpc8541cds.c @@ -200,7 +200,7 @@ const iop_conf_t iop_conf_tab[4][32] = { int checkboard (void) { - volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); /* PCI slot in USER bits CSR[6:7] by convention. */ uint pci_slot = get_pci_slot (); @@ -258,7 +258,7 @@ initdram(int board_type) * Override DLL = 1, Course Adj = 1, Tap Select = 0 */ - volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); gur->ddrdllcr = 0x81000000; asm("sync;isync;msync"); @@ -290,8 +290,8 @@ initdram(int board_type) void local_bus_init(void) { - volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR); + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); uint clkdiv; uint lbc_hz; @@ -302,8 +302,8 @@ local_bus_init(void) * Errata LBC11. * Fix Local Bus clock glitch when DLL is enabled. * - * If localbus freq is < 66Mhz, DLL bypass mode must be used. - * If localbus freq is > 133Mhz, DLL can be safely enabled. + * If localbus freq is < 66MHz, DLL bypass mode must be used. + * If localbus freq is > 133MHz, DLL can be safely enabled. * Between 66 and 133, the DLL is enabled with an override workaround. */ @@ -337,56 +337,56 @@ local_bus_init(void) void sdram_init(void) { -#if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM) +#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM) uint idx; - volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR); - uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE; + volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; uint cpu_board_rev; uint lsdmr_common; puts(" SDRAM: "); - print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); + print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); /* * Setup SDRAM Base and Option Registers */ - lbc->or2 = CFG_OR2_PRELIM; + lbc->or2 = CONFIG_SYS_OR2_PRELIM; asm("msync"); - lbc->br2 = CFG_BR2_PRELIM; + lbc->br2 = CONFIG_SYS_BR2_PRELIM; asm("msync"); - lbc->lbcr = CFG_LBC_LBCR; + lbc->lbcr = CONFIG_SYS_LBC_LBCR; asm("msync"); - lbc->lsrt = CFG_LBC_LSRT; - lbc->mrtpr = CFG_LBC_MRTPR; + lbc->lsrt = CONFIG_SYS_LBC_LSRT; + lbc->mrtpr = CONFIG_SYS_LBC_MRTPR; asm("msync"); /* * Determine which address lines to use baed on CPU board rev. */ cpu_board_rev = get_cpu_board_revision(); - lsdmr_common = CFG_LBC_LSDMR_COMMON; + lsdmr_common = CONFIG_SYS_LBC_LSDMR_COMMON; if (cpu_board_rev == MPC85XX_CPU_BOARD_REV_1_0) { - lsdmr_common |= CFG_LBC_LSDMR_BSMA1617; + lsdmr_common |= CONFIG_SYS_LBC_LSDMR_BSMA1617; } else if (cpu_board_rev == MPC85XX_CPU_BOARD_REV_1_1) { - lsdmr_common |= CFG_LBC_LSDMR_BSMA1516; + lsdmr_common |= CONFIG_SYS_LBC_LSDMR_BSMA1516; } else { /* * Assume something unable to identify itself is * really old, and likely has lines 16/17 mapped. */ - lsdmr_common |= CFG_LBC_LSDMR_BSMA1617; + lsdmr_common |= CONFIG_SYS_LBC_LSDMR_BSMA1617; } /* * Issue PRECHARGE ALL command. */ - lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_PCHALL; + lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_PCHALL; asm("sync;msync"); *sdram_addr = 0xff; ppcDcbf((unsigned long) sdram_addr); @@ -396,7 +396,7 @@ sdram_init(void) * Issue 8 AUTO REFRESH commands. */ for (idx = 0; idx < 8; idx++) { - lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_ARFRSH; + lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_ARFRSH; asm("sync;msync"); *sdram_addr = 0xff; ppcDcbf((unsigned long) sdram_addr); @@ -406,7 +406,7 @@ sdram_init(void) /* * Issue 8 MODE-set command. */ - lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_MRW; + lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_MRW; asm("sync;msync"); *sdram_addr = 0xff; ppcDcbf((unsigned long) sdram_addr); @@ -415,7 +415,7 @@ sdram_init(void) /* * Issue NORMAL OP command. */ - lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_NORMAL; + lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_NORMAL; asm("sync;msync"); *sdram_addr = 0xff; ppcDcbf((unsigned long) sdram_addr); diff --git a/board/freescale/mpc8541cds/tlb.c b/board/freescale/mpc8541cds/tlb.c index c5434a069..bf957c08c 100644 --- a/board/freescale/mpc8541cds/tlb.c +++ b/board/freescale/mpc8541cds/tlb.c @@ -28,16 +28,16 @@ struct fsl_e_tlb_entry tlb_table[] = { /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), @@ -46,7 +46,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * 0xff000000 16M FLASH * Out of reset this entry is only 4K. */ - SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE, + SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 0, BOOKE_PAGESZ_16M, 1), @@ -54,7 +54,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * TLB 1: 256M Non-cacheable, guarded * 0x80000000 256M PCI1 MEM First half */ - SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS, + SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 1, BOOKE_PAGESZ_256M, 1), @@ -62,7 +62,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * TLB 2: 256M Non-cacheable, guarded * 0x90000000 256M PCI1 MEM Second half */ - SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS + 0x10000000, CFG_PCI1_MEM_PHYS + 0x10000000, + SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 2, BOOKE_PAGESZ_256M, 1), @@ -70,7 +70,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * TLB 3: 256M Non-cacheable, guarded * 0xa0000000 256M PCI2 MEM First half */ - SET_TLB_ENTRY(1, CFG_PCI2_MEM_PHYS, CFG_PCI2_MEM_PHYS, + SET_TLB_ENTRY(1, CONFIG_SYS_PCI2_MEM_PHYS, CONFIG_SYS_PCI2_MEM_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 3, BOOKE_PAGESZ_256M, 1), @@ -78,7 +78,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * TLB 4: 256M Non-cacheable, guarded * 0xb0000000 256M PCI2 MEM Second half */ - SET_TLB_ENTRY(1, CFG_PCI2_MEM_PHYS + 0x10000000, CFG_PCI2_MEM_PHYS + 0x10000000, + SET_TLB_ENTRY(1, CONFIG_SYS_PCI2_MEM_PHYS + 0x10000000, CONFIG_SYS_PCI2_MEM_PHYS + 0x10000000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 4, BOOKE_PAGESZ_256M, 1), @@ -88,7 +88,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * 0xe200_0000 16M PCI1 IO * 0xe300_0000 16M PCI2 IO */ - SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS, + SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 5, BOOKE_PAGESZ_64M, 1), @@ -96,7 +96,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * TLB 6: 64M Cacheable, non-guarded * 0xf000_0000 64M LBC SDRAM */ - SET_TLB_ENTRY(1, CFG_LBC_SDRAM_BASE, CFG_LBC_SDRAM_BASE, + SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, CONFIG_SYS_LBC_SDRAM_BASE, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 6, BOOKE_PAGESZ_64M, 1), diff --git a/board/freescale/mpc8544ds/ddr.c b/board/freescale/mpc8544ds/ddr.c index bbb5ee2c4..34f84a265 100644 --- a/board/freescale/mpc8544ds/ddr.c +++ b/board/freescale/mpc8544ds/ddr.c @@ -10,6 +10,7 @@ #include <i2c.h> #include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_ddr_dimm_params.h> static void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) @@ -37,7 +38,9 @@ void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, } } -void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num) +void fsl_ddr_board_options(memctl_options_t *popts, + dimm_params_t *pdimm, + unsigned int ctrl_num) { /* * Factors to consider for clock adjust: diff --git a/board/freescale/mpc8544ds/law.c b/board/freescale/mpc8544ds/law.c index 54cf36bd4..317ba2696 100644 --- a/board/freescale/mpc8544ds/law.c +++ b/board/freescale/mpc8544ds/law.c @@ -28,15 +28,15 @@ #include <asm/mmu.h> struct law_entry law_table[] = { - SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI), - SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI), - SET_LAW(CFG_LBC_NONCACHE_BASE, LAWAR_SIZE_128M, LAW_TRGT_IF_LBC), - SET_LAW(CFG_PCIE1_MEM_PHYS, LAWAR_SIZE_256M, LAW_TRGT_IF_PCIE_1), - SET_LAW(CFG_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1), - SET_LAW(CFG_PCIE2_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_2), - SET_LAW(CFG_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2), + SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI), + SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI), + SET_LAW(CONFIG_SYS_LBC_NONCACHE_BASE, LAWAR_SIZE_128M, LAW_TRGT_IF_LBC), + SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAWAR_SIZE_256M, LAW_TRGT_IF_PCIE_1), + SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1), + SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_2), + SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2), /* contains both PCIE3 MEM & IO space */ - SET_LAW(CFG_PCIE3_MEM_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_PCIE_3), + SET_LAW(CONFIG_SYS_PCIE3_MEM_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_PCIE_3), }; int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c index 4e976b78f..14581abdd 100644 --- a/board/freescale/mpc8544ds/mpc8544ds.c +++ b/board/freescale/mpc8544ds/mpc8544ds.c @@ -32,18 +32,17 @@ #include <miiphy.h> #include <libfdt.h> #include <fdt_support.h> +#include <tsec.h> +#include <netdev.h> #include "../common/pixis.h" - -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) -extern void ddr_enable_ecc(unsigned int dram_size); -#endif +#include "../common/sgmii_riser.h" int checkboard (void) { - volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR); - volatile ccsr_local_ecm_t *ecm = (void *)(CFG_MPC85xx_ECM_ADDR); + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR); if ((uint)&gur->porpllsr != 0xe00e0000) { printf("immap size error %lx\n",(ulong)&gur->porpllsr); @@ -74,12 +73,6 @@ initdram(int board_type) dram_size *= 0x100000; -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - /* - * Initialize and enable DDR ECC. - */ - ddr_enable_ecc(dram_size); -#endif puts(" DDR: "); return dram_size; } @@ -100,12 +93,15 @@ static struct pci_controller pcie2_hose; static struct pci_controller pcie3_hose; #endif +extern int fsl_pci_setup_inbound_windows(struct pci_region *r); +extern void fsl_pci_init(struct pci_controller *hose); + int first_free_busno=0; void pci_init_board(void) { - volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); uint devdisr = gur->devdisr; uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16; @@ -122,11 +118,11 @@ pci_init_board(void) #ifdef CONFIG_PCIE3 { - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE3_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR; struct pci_controller *hose = &pcie3_hose; int pcie_ep = (host_agent == 1); int pcie_configured = io_sel >= 1; + struct pci_region *r = hose->regions; if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ printf ("\n PCIE3 connected to ULI as %s (base address %x)", @@ -139,36 +135,31 @@ pci_init_board(void) printf ("\n"); /* inbound */ - pci_set_region(hose->regions + 0, - CFG_PCI_MEMORY_BUS, - CFG_PCI_MEMORY_PHYS, - CFG_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, - CFG_PCIE3_MEM_BASE, - CFG_PCIE3_MEM_PHYS, - CFG_PCIE3_MEM_SIZE, + pci_set_region(r++, + CONFIG_SYS_PCIE3_MEM_BASE, + CONFIG_SYS_PCIE3_MEM_PHYS, + CONFIG_SYS_PCIE3_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, - CFG_PCIE3_IO_BASE, - CFG_PCIE3_IO_PHYS, - CFG_PCIE3_IO_SIZE, + pci_set_region(r++, + CONFIG_SYS_PCIE3_IO_BASE, + CONFIG_SYS_PCIE3_IO_PHYS, + CONFIG_SYS_PCIE3_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; -#ifdef CFG_PCIE3_MEM_BASE2 +#ifdef CONFIG_SYS_PCIE3_MEM_BASE2 /* outbound memory */ - pci_set_region(hose->regions + 3, - CFG_PCIE3_MEM_BASE2, - CFG_PCIE3_MEM_PHYS2, - CFG_PCIE3_MEM_SIZE2, + pci_set_region(r++, + CONFIG_SYS_PCIE3_MEM_BASE2, + CONFIG_SYS_PCIE3_MEM_PHYS2, + CONFIG_SYS_PCIE3_MEM_SIZE2, PCI_REGION_MEM); - hose->region_count++; #endif + hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); @@ -182,7 +173,7 @@ pci_init_board(void) * Activate ULI1575 legacy chip by performing a fake * memory access. Needed to make ULI RTC work. */ - in_be32((u32 *)CFG_PCIE3_MEM_BASE); + in_be32((u32 *)CONFIG_SYS_PCIE3_MEM_BASE); } else { printf (" PCIE3: disabled\n"); } @@ -194,11 +185,11 @@ pci_init_board(void) #ifdef CONFIG_PCIE1 { - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR; struct pci_controller *hose = &pcie1_hose; int pcie_ep = (host_agent == 5); int pcie_configured = io_sel & 6; + struct pci_region *r = hose->regions; if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ printf ("\n PCIE1 connected to Slot2 as %s (base address %x)", @@ -211,36 +202,31 @@ pci_init_board(void) printf ("\n"); /* inbound */ - pci_set_region(hose->regions + 0, - CFG_PCI_MEMORY_BUS, - CFG_PCI_MEMORY_PHYS, - CFG_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, - CFG_PCIE1_MEM_BASE, - CFG_PCIE1_MEM_PHYS, - CFG_PCIE1_MEM_SIZE, + pci_set_region(r++, + CONFIG_SYS_PCIE1_MEM_BASE, + CONFIG_SYS_PCIE1_MEM_PHYS, + CONFIG_SYS_PCIE1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, - CFG_PCIE1_IO_BASE, - CFG_PCIE1_IO_PHYS, - CFG_PCIE1_IO_SIZE, + pci_set_region(r++, + CONFIG_SYS_PCIE1_IO_BASE, + CONFIG_SYS_PCIE1_IO_PHYS, + CONFIG_SYS_PCIE1_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; -#ifdef CFG_PCIE1_MEM_BASE2 +#ifdef CONFIG_SYS_PCIE1_MEM_BASE2 /* outbound memory */ - pci_set_region(hose->regions + 3, - CFG_PCIE1_MEM_BASE2, - CFG_PCIE1_MEM_PHYS2, - CFG_PCIE1_MEM_SIZE2, + pci_set_region(r++, + CONFIG_SYS_PCIE1_MEM_BASE2, + CONFIG_SYS_PCIE1_MEM_PHYS2, + CONFIG_SYS_PCIE1_MEM_SIZE2, PCI_REGION_MEM); - hose->region_count++; #endif + hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); @@ -262,11 +248,11 @@ pci_init_board(void) #ifdef CONFIG_PCIE2 { - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE2_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR; struct pci_controller *hose = &pcie2_hose; int pcie_ep = (host_agent == 3); int pcie_configured = io_sel & 4; + struct pci_region *r = hose->regions; if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ printf ("\n PCIE2 connected to Slot 1 as %s (base address %x)", @@ -279,36 +265,31 @@ pci_init_board(void) printf ("\n"); /* inbound */ - pci_set_region(hose->regions + 0, - CFG_PCI_MEMORY_BUS, - CFG_PCI_MEMORY_PHYS, - CFG_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, - CFG_PCIE2_MEM_BASE, - CFG_PCIE2_MEM_PHYS, - CFG_PCIE2_MEM_SIZE, + pci_set_region(r++, + CONFIG_SYS_PCIE2_MEM_BASE, + CONFIG_SYS_PCIE2_MEM_PHYS, + CONFIG_SYS_PCIE2_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, - CFG_PCIE2_IO_BASE, - CFG_PCIE2_IO_PHYS, - CFG_PCIE2_IO_SIZE, + pci_set_region(r++, + CONFIG_SYS_PCIE2_IO_BASE, + CONFIG_SYS_PCIE2_IO_PHYS, + CONFIG_SYS_PCIE2_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; -#ifdef CFG_PCIE2_MEM_BASE2 +#ifdef CONFIG_SYS_PCIE2_MEM_BASE2 /* outbound memory */ - pci_set_region(hose->regions + 3, - CFG_PCIE2_MEM_BASE2, - CFG_PCIE2_MEM_PHYS2, - CFG_PCIE2_MEM_SIZE2, + pci_set_region(r++, + CONFIG_SYS_PCIE2_MEM_BASE2, + CONFIG_SYS_PCIE2_MEM_PHYS2, + CONFIG_SYS_PCIE2_MEM_SIZE2, PCI_REGION_MEM); - hose->region_count++; #endif + hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); @@ -329,9 +310,9 @@ pci_init_board(void) #ifdef CONFIG_PCI1 { - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR; struct pci_controller *hose = &pci1_hose; + struct pci_region *r = hose->regions; uint pci_agent = (host_agent == 6); uint pci_speed = 66666000; /*get_clock_freq (); PCI PSPEED in [4:5] */ @@ -352,35 +333,31 @@ pci_init_board(void) ); /* inbound */ - pci_set_region(hose->regions + 0, - CFG_PCI_MEMORY_BUS, - CFG_PCI_MEMORY_PHYS, - CFG_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, - CFG_PCI1_MEM_BASE, - CFG_PCI1_MEM_PHYS, - CFG_PCI1_MEM_SIZE, + pci_set_region(r++, + CONFIG_SYS_PCI1_MEM_BASE, + CONFIG_SYS_PCI1_MEM_PHYS, + CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, - CFG_PCI1_IO_BASE, - CFG_PCI1_IO_PHYS, - CFG_PCI1_IO_SIZE, + pci_set_region(r++, + CONFIG_SYS_PCI1_IO_BASE, + CONFIG_SYS_PCI1_IO_PHYS, + CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; -#ifdef CFG_PCIE3_MEM_BASE2 + +#ifdef CONFIG_SYS_PCIE3_MEM_BASE2 /* outbound memory */ - pci_set_region(hose->regions + 3, - CFG_PCIE3_MEM_BASE2, - CFG_PCIE3_MEM_PHYS2, - CFG_PCIE3_MEM_SIZE2, + pci_set_region(r++, + CONFIG_SYS_PCIE3_MEM_BASE2, + CONFIG_SYS_PCIE3_MEM_PHYS2, + CONFIG_SYS_PCIE3_MEM_SIZE2, PCI_REGION_MEM); - hose->region_count++; #endif + hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); @@ -463,47 +440,62 @@ get_board_sys_clk(ulong dummy) return val; } +int board_eth_init(bd_t *bis) +{ +#ifdef CONFIG_TSEC_ENET + struct tsec_info_struct tsec_info[2]; + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; + int num = 0; + +#ifdef CONFIG_TSEC1 + SET_STD_TSEC_INFO(tsec_info[num], 1); + if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS)) + tsec_info[num].flags |= TSEC_SGMII; + num++; +#endif +#ifdef CONFIG_TSEC3 + SET_STD_TSEC_INFO(tsec_info[num], 3); + if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS)) + tsec_info[num].flags |= TSEC_SGMII; + num++; +#endif + + if (!num) { + printf("No TSECs initialized\n"); + + return 0; + } + + if (io_sel & 1) + fsl_sgmii_riser_init(tsec_info, num); + + + tsec_eth_init(bis, tsec_info, num); +#endif + return pci_eth_init(bis); +} + #if defined(CONFIG_OF_BOARD_SETUP) +extern void ft_fsl_pci_setup(void *blob, const char *pci_alias, + struct pci_controller *hose); -void -ft_board_setup(void *blob, bd_t *bd) +void ft_board_setup(void *blob, bd_t *bd) { - int node, tmp[2]; - const char *path; - ft_cpu_setup(blob, bd); - node = fdt_path_offset(blob, "/aliases"); - tmp[0] = 0; - if (node >= 0) { + #ifdef CONFIG_PCI1 - path = fdt_getprop(blob, node, "pci0", NULL); - if (path) { - tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + ft_fsl_pci_setup(blob, "pci0", &pci1_hose); #endif #ifdef CONFIG_PCIE2 - path = fdt_getprop(blob, node, "pci1", NULL); - if (path) { - tmp[1] = pcie2_hose.last_busno - pcie2_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + ft_fsl_pci_setup(blob, "pci1", &pcie1_hose); #endif #ifdef CONFIG_PCIE1 - path = fdt_getprop(blob, node, "pci2", NULL); - if (path) { - tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + ft_fsl_pci_setup(blob, "pci2", &pcie3_hose); #endif #ifdef CONFIG_PCIE3 - path = fdt_getprop(blob, node, "pci3", NULL); - if (path) { - tmp[1] = pcie3_hose.last_busno - pcie3_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + ft_fsl_pci_setup(blob, "pci3", &pcie2_hose); #endif - } } #endif diff --git a/board/freescale/mpc8544ds/tlb.c b/board/freescale/mpc8544ds/tlb.c index 40e049951..c7442b26f 100644 --- a/board/freescale/mpc8544ds/tlb.c +++ b/board/freescale/mpc8544ds/tlb.c @@ -28,16 +28,16 @@ struct fsl_e_tlb_entry tlb_table[] = { /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), /* @@ -45,28 +45,28 @@ struct fsl_e_tlb_entry tlb_table[] = { * 0xfc000000 64M Covers FLASH at 0xFE800000 and 0xFF800000 * Out of reset this entry is only 4K. */ - SET_TLB_ENTRY(1, CFG_BOOT_BLOCK, CFG_BOOT_BLOCK, + SET_TLB_ENTRY(1, CONFIG_SYS_BOOT_BLOCK, CONFIG_SYS_BOOT_BLOCK, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 0, BOOKE_PAGESZ_64M, 1), /* * TLB 1: 1G Non-cacheable, guarded * 0x80000000 1G PCIE 8,9,a,b */ - SET_TLB_ENTRY(1, CFG_PCIE_PHYS, CFG_PCIE_PHYS, + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE_PHYS, CONFIG_SYS_PCIE_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 1, BOOKE_PAGESZ_1G, 1), /* * TLB 2: 256M Non-cacheable, guarded */ - SET_TLB_ENTRY(1, CFG_PCI_PHYS, CFG_PCI_PHYS, + SET_TLB_ENTRY(1, CONFIG_SYS_PCI_PHYS, CONFIG_SYS_PCI_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 2, BOOKE_PAGESZ_256M, 1), /* * TLB 3: 256M Non-cacheable, guarded */ - SET_TLB_ENTRY(1, CFG_PCI_PHYS + 0x10000000, CFG_PCI_PHYS + 0x10000000, + SET_TLB_ENTRY(1, CONFIG_SYS_PCI_PHYS + 0x10000000, CONFIG_SYS_PCI_PHYS + 0x10000000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 3, BOOKE_PAGESZ_256M, 1), @@ -75,7 +75,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * 0xe000_0000 1M CCSRBAR * 0xe100_0000 255M PCI IO range */ - SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS, + SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 4, BOOKE_PAGESZ_64M, 1), @@ -83,7 +83,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * TLB 5: 64M Non-cacheable, guarded * 0xf8000000 64M PIXIS 0xF8000000 - 0xFBFFFFFF */ - SET_TLB_ENTRY(1, CFG_LBC_NONCACHE_BASE, CFG_LBC_NONCACHE_BASE, + SET_TLB_ENTRY(1, CONFIG_SYS_LBC_NONCACHE_BASE, CONFIG_SYS_LBC_NONCACHE_BASE, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 5, BOOKE_PAGESZ_64M, 1), }; diff --git a/board/freescale/mpc8548cds/ddr.c b/board/freescale/mpc8548cds/ddr.c index f07d746c2..ab64fa88f 100644 --- a/board/freescale/mpc8548cds/ddr.c +++ b/board/freescale/mpc8548cds/ddr.c @@ -10,6 +10,7 @@ #include <i2c.h> #include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_ddr_dimm_params.h> static void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) @@ -37,7 +38,9 @@ void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, } } -void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num) +void fsl_ddr_board_options(memctl_options_t *popts, + dimm_params_t *pdimm, + unsigned int ctrl_num) { /* * Factors to consider for clock adjust: diff --git a/board/freescale/mpc8548cds/law.c b/board/freescale/mpc8548cds/law.c index 34b9d1c4d..98748aa47 100644 --- a/board/freescale/mpc8548cds/law.c +++ b/board/freescale/mpc8548cds/law.c @@ -51,22 +51,22 @@ */ struct law_entry law_table[] = { -#ifdef CFG_PCI1_MEM_PHYS - SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI), - SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI), +#ifdef CONFIG_SYS_PCI1_MEM_PHYS + SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI), + SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI), #endif -#ifdef CFG_PCI2_MEM_PHYS - SET_LAW(CFG_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2), - SET_LAW(CFG_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2), +#ifdef CONFIG_SYS_PCI2_MEM_PHYS + SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2), + SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2), #endif -#ifdef CFG_PCIE1_MEM_PHYS - SET_LAW(CFG_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1), - SET_LAW(CFG_PCIE1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_1), +#ifdef CONFIG_SYS_PCIE1_MEM_PHYS + SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1), + SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_1), #endif /* LBC window - maps 256M 0xf0000000 -> 0xffffffff */ - SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC), -#ifdef CFG_RIO_MEM_PHYS - SET_LAW(CFG_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO), + SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC), +#ifdef CONFIG_SYS_RIO_MEM_PHYS + SET_LAW(CONFIG_SYS_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO), #endif }; diff --git a/board/freescale/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c index 84d3850cc..c562fc9d9 100644 --- a/board/freescale/mpc8548cds/mpc8548cds.c +++ b/board/freescale/mpc8548cds/mpc8548cds.c @@ -38,10 +38,6 @@ #include "../common/eeprom.h" #include "../common/via.h" -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) -extern void ddr_enable_ecc(unsigned int dram_size); -#endif - DECLARE_GLOBAL_DATA_PTR; void local_bus_init(void); @@ -49,14 +45,13 @@ void sdram_init(void); int checkboard (void) { - volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); - volatile ccsr_local_ecm_t *ecm = (void *)(CFG_MPC85xx_ECM_ADDR); + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR); /* PCI slot in USER bits CSR[6:7] by convention. */ uint pci_slot = get_pci_slot (); uint cpu_board_rev = get_cpu_board_revision (); - uint svr; printf ("Board: CDS Version 0x%02x, PCI Slot %d\n", get_board_version (), pci_slot); @@ -69,17 +64,6 @@ int checkboard (void) */ local_bus_init (); - svr = get_svr(); - - /* - * Fix CPU2 errata: A core hang possible while executing a - * msync instruction and a snoopable transaction from an I/O - * master tagged to make quick forward progress is present. - * Fixed in Silicon Rev.2.1 - */ - if (!(SVR_MAJ(svr) >= 2 && SVR_MIN(svr) >= 1)) - ecm->eebpcr |= (1 << 16); - /* * Hack TSEC 3 and 4 IO voltages. */ @@ -106,7 +90,7 @@ initdram(int board_type) * Override DLL = 1, Course Adj = 1, Tap Select = 0 */ - volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); gur->ddrdllcr = 0x81000000; asm("sync;isync;msync"); @@ -118,13 +102,6 @@ initdram(int board_type) dram_size = setup_ddr_tlbs(dram_size / 0x100000); dram_size *= 0x100000; -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - /* - * Initialize and enable DDR ECC. - */ - ddr_enable_ecc(dram_size); -#endif - /* * SDRAM Initialization */ @@ -140,8 +117,8 @@ initdram(int board_type) void local_bus_init(void) { - volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR); + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); uint clkdiv; uint lbc_hz; @@ -174,46 +151,46 @@ local_bus_init(void) void sdram_init(void) { -#if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM) +#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM) uint idx; - volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR); - uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE; + volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; uint cpu_board_rev; uint lsdmr_common; puts(" SDRAM: "); - print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); + print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); /* * Setup SDRAM Base and Option Registers */ - lbc->or2 = CFG_OR2_PRELIM; + lbc->or2 = CONFIG_SYS_OR2_PRELIM; asm("msync"); - lbc->br2 = CFG_BR2_PRELIM; + lbc->br2 = CONFIG_SYS_BR2_PRELIM; asm("msync"); - lbc->lbcr = CFG_LBC_LBCR; + lbc->lbcr = CONFIG_SYS_LBC_LBCR; asm("msync"); - lbc->lsrt = CFG_LBC_LSRT; - lbc->mrtpr = CFG_LBC_MRTPR; + lbc->lsrt = CONFIG_SYS_LBC_LSRT; + lbc->mrtpr = CONFIG_SYS_LBC_MRTPR; asm("msync"); /* * MPC8548 uses "new" 15-16 style addressing. */ cpu_board_rev = get_cpu_board_revision(); - lsdmr_common = CFG_LBC_LSDMR_COMMON; - lsdmr_common |= CFG_LBC_LSDMR_BSMA1516; + lsdmr_common = CONFIG_SYS_LBC_LSDMR_COMMON; + lsdmr_common |= CONFIG_SYS_LBC_LSDMR_BSMA1516; /* * Issue PRECHARGE ALL command. */ - lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_PCHALL; + lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_PCHALL; asm("sync;msync"); *sdram_addr = 0xff; ppcDcbf((unsigned long) sdram_addr); @@ -223,7 +200,7 @@ sdram_init(void) * Issue 8 AUTO REFRESH commands. */ for (idx = 0; idx < 8; idx++) { - lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_ARFRSH; + lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_ARFRSH; asm("sync;msync"); *sdram_addr = 0xff; ppcDcbf((unsigned long) sdram_addr); @@ -233,7 +210,7 @@ sdram_init(void) /* * Issue 8 MODE-set command. */ - lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_MRW; + lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_MRW; asm("sync;msync"); *sdram_addr = 0xff; ppcDcbf((unsigned long) sdram_addr); @@ -242,7 +219,7 @@ sdram_init(void) /* * Issue NORMAL OP command. */ - lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_NORMAL; + lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_NORMAL; asm("sync;msync"); *sdram_addr = 0xff; ppcDcbf((unsigned long) sdram_addr); @@ -285,22 +262,25 @@ static struct pci_controller pci2_hose; static struct pci_controller pcie1_hose; #endif /* CONFIG_PCIE1 */ +extern int fsl_pci_setup_inbound_windows(struct pci_region *r); +extern void fsl_pci_init(struct pci_controller *hose); + int first_free_busno=0; void pci_init_board(void) { - volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16; #ifdef CONFIG_PCI1 { - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR; struct pci_controller *hose = &pci1_hose; struct pci_config_table *table; + struct pci_region *r = hose->regions; uint pci_32 = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32; /* PORDEVSR[15] */ uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; /* PORDEVSR[14] */ @@ -322,27 +302,22 @@ pci_init_board(void) /* inbound */ - pci_set_region(hose->regions + 0, - CFG_PCI_MEMORY_BUS, - CFG_PCI_MEMORY_PHYS, - CFG_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); - + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, - CFG_PCI1_MEM_BASE, - CFG_PCI1_MEM_PHYS, - CFG_PCI1_MEM_SIZE, + pci_set_region(r++, + CONFIG_SYS_PCI1_MEM_BASE, + CONFIG_SYS_PCI1_MEM_PHYS, + CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, - CFG_PCI1_IO_BASE, - CFG_PCI1_IO_PHYS, - CFG_PCI1_IO_SIZE, + pci_set_region(r++, + CONFIG_SYS_PCI1_IO_BASE, + CONFIG_SYS_PCI1_IO_PHYS, + CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; + hose->region_count = r - hose->regions; /* relocate config table pointers */ hose->config_table = \ @@ -357,7 +332,7 @@ pci_init_board(void) first_free_busno=hose->last_busno+1; printf ("PCI on bus %02x - %02x\n",hose->first_busno,hose->last_busno); #ifdef CONFIG_PCIX_CHECK - if (!(gur->pordevsr & PORDEVSR_PCI)) { + if (!(gur->pordevsr & MPC85xx_PORDEVSR_PCI1)) { /* PCI-X init */ if (CONFIG_SYS_CLK_FREQ < 66000000) printf("PCI-X will only work at 66 MHz\n"); @@ -392,10 +367,10 @@ pci_init_board(void) #ifdef CONFIG_PCIE1 { - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR; struct pci_controller *hose = &pcie1_hose; int pcie_ep = (host_agent == 0) || (host_agent == 2 ) || (host_agent == 3); + struct pci_region *r = hose->regions; int pcie_configured = io_sel >= 1; @@ -411,27 +386,23 @@ pci_init_board(void) printf ("\n"); /* inbound */ - pci_set_region(hose->regions + 0, - CFG_PCI_MEMORY_BUS, - CFG_PCI_MEMORY_PHYS, - CFG_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, - CFG_PCIE1_MEM_BASE, - CFG_PCIE1_MEM_PHYS, - CFG_PCIE1_MEM_SIZE, + pci_set_region(r++, + CONFIG_SYS_PCIE1_MEM_BASE, + CONFIG_SYS_PCIE1_MEM_PHYS, + CONFIG_SYS_PCIE1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, - CFG_PCIE1_IO_BASE, - CFG_PCIE1_IO_PHYS, - CFG_PCIE1_IO_SIZE, + pci_set_region(r++, + CONFIG_SYS_PCIE1_IO_BASE, + CONFIG_SYS_PCIE1_IO_PHYS, + CONFIG_SYS_PCIE1_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; + hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); @@ -484,29 +455,16 @@ int last_stage_init(void) #if defined(CONFIG_OF_BOARD_SETUP) -void -ft_pci_setup(void *blob, bd_t *bd) -{ - int node, tmp[2]; - const char *path; +extern void ft_fsl_pci_setup(void *blob, const char *pci_alias, + struct pci_controller *hose); - node = fdt_path_offset(blob, "/aliases"); - tmp[0] = 0; - if (node >= 0) { +void ft_pci_setup(void *blob, bd_t *bd) +{ #ifdef CONFIG_PCI1 - path = fdt_getprop(blob, node, "pci0", NULL); - if (path) { - tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + ft_fsl_pci_setup(blob, "pci0", &pci1_hose); #endif #ifdef CONFIG_PCIE1 - path = fdt_getprop(blob, node, "pci1", NULL); - if (path) { - tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + ft_fsl_pci_setup(blob, "pci1", &pcie1_hose); #endif - } } #endif diff --git a/board/freescale/mpc8548cds/tlb.c b/board/freescale/mpc8548cds/tlb.c index ab99af7e1..eab212a4c 100644 --- a/board/freescale/mpc8548cds/tlb.c +++ b/board/freescale/mpc8548cds/tlb.c @@ -28,16 +28,16 @@ struct fsl_e_tlb_entry tlb_table[] = { /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), @@ -46,7 +46,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * 0xff000000 16M FLASH * Out of reset this entry is only 4K. */ - SET_TLB_ENTRY(1, CFG_BOOT_BLOCK, CFG_BOOT_BLOCK, + SET_TLB_ENTRY(1, CONFIG_SYS_BOOT_BLOCK, CONFIG_SYS_BOOT_BLOCK, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 0, BOOKE_PAGESZ_16M, 1), @@ -54,22 +54,22 @@ struct fsl_e_tlb_entry tlb_table[] = { * TLB 1: 1G Non-cacheable, guarded * 0x80000000 1G PCI1/PCIE 8,9,a,b */ - SET_TLB_ENTRY(1, CFG_PCI_PHYS, CFG_PCI_PHYS, + SET_TLB_ENTRY(1, CONFIG_SYS_PCI_PHYS, CONFIG_SYS_PCI_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 1, BOOKE_PAGESZ_1G, 1), -#ifdef CFG_RIO_MEM_PHYS +#ifdef CONFIG_SYS_RIO_MEM_PHYS /* * TLB 2: 256M Non-cacheable, guarded */ - SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE, CFG_RIO_MEM_BASE, + SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BASE, CONFIG_SYS_RIO_MEM_BASE, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 2, BOOKE_PAGESZ_256M, 1), /* * TLB 3: 256M Non-cacheable, guarded */ - SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE + 0x10000000, CFG_RIO_MEM_BASE + 0x10000000, + SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BASE + 0x10000000, CONFIG_SYS_RIO_MEM_BASE + 0x10000000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 3, BOOKE_PAGESZ_256M, 1), #endif @@ -80,7 +80,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * 0xe210_0000 1M PCI2 IO * 0xe300_0000 1M PCIe IO */ - SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS, + SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 5, BOOKE_PAGESZ_64M, 1), @@ -88,7 +88,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * TLB 6: 64M Cacheable, non-guarded * 0xf000_0000 64M LBC SDRAM */ - SET_TLB_ENTRY(1, CFG_LBC_CACHE_BASE, CFG_LBC_CACHE_BASE, + SET_TLB_ENTRY(1, CONFIG_SYS_LBC_CACHE_BASE, CONFIG_SYS_LBC_CACHE_BASE, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 6, BOOKE_PAGESZ_64M, 1), @@ -96,7 +96,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * TLB 7: 64M Non-cacheable, guarded * 0xf8000000 64M CADMUS registers, relocated L2SRAM */ - SET_TLB_ENTRY(1, CFG_LBC_NONCACHE_BASE, CFG_LBC_NONCACHE_BASE, + SET_TLB_ENTRY(1, CONFIG_SYS_LBC_NONCACHE_BASE, CONFIG_SYS_LBC_NONCACHE_BASE, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 7, BOOKE_PAGESZ_64M, 1), }; diff --git a/board/freescale/mpc8555cds/ddr.c b/board/freescale/mpc8555cds/ddr.c index 11ce57d36..c84a6cbe1 100644 --- a/board/freescale/mpc8555cds/ddr.c +++ b/board/freescale/mpc8555cds/ddr.c @@ -10,6 +10,7 @@ #include <i2c.h> #include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_ddr_dimm_params.h> static void get_spd(ddr1_spd_eeprom_t *spd, unsigned char i2c_address) @@ -36,7 +37,9 @@ void fsl_ddr_get_spd(ddr1_spd_eeprom_t *ctrl_dimms_spd, } } -void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num) +void fsl_ddr_board_options(memctl_options_t *popts, + dimm_params_t *pdimm, + unsigned int ctrl_num) { /* * Factors to consider for clock adjust: diff --git a/board/freescale/mpc8555cds/law.c b/board/freescale/mpc8555cds/law.c index fbf2bdc07..8e3de22a4 100644 --- a/board/freescale/mpc8555cds/law.c +++ b/board/freescale/mpc8555cds/law.c @@ -47,12 +47,12 @@ */ struct law_entry law_table[] = { - SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI), - SET_LAW(CFG_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2), - SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI), - SET_LAW(CFG_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2), + SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI), + SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2), + SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI), + SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2), /* LBC window - maps 256M 0xf0000000 -> 0xffffffff */ - SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC), + SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC), }; int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/mpc8555cds/mpc8555cds.c b/board/freescale/mpc8555cds/mpc8555cds.c index 826056a84..33685c19f 100644 --- a/board/freescale/mpc8555cds/mpc8555cds.c +++ b/board/freescale/mpc8555cds/mpc8555cds.c @@ -198,7 +198,7 @@ const iop_conf_t iop_conf_tab[4][32] = { int checkboard (void) { - volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); /* PCI slot in USER bits CSR[6:7] by convention. */ uint pci_slot = get_pci_slot (); @@ -256,7 +256,7 @@ initdram(int board_type) * Override DLL = 1, Course Adj = 1, Tap Select = 0 */ - volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); gur->ddrdllcr = 0x81000000; asm("sync;isync;msync"); @@ -290,8 +290,8 @@ initdram(int board_type) void local_bus_init(void) { - volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR); + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); uint clkdiv; uint lbc_hz; @@ -302,8 +302,8 @@ local_bus_init(void) * Errata LBC11. * Fix Local Bus clock glitch when DLL is enabled. * - * If localbus freq is < 66Mhz, DLL bypass mode must be used. - * If localbus freq is > 133Mhz, DLL can be safely enabled. + * If localbus freq is < 66MHz, DLL bypass mode must be used. + * If localbus freq is > 133MHz, DLL can be safely enabled. * Between 66 and 133, the DLL is enabled with an override workaround. */ @@ -337,55 +337,55 @@ local_bus_init(void) void sdram_init(void) { -#if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM) +#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM) uint idx; - volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR); - uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE; + volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; uint cpu_board_rev; uint lsdmr_common; puts(" SDRAM: "); - print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); + print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); /* * Setup SDRAM Base and Option Registers */ - lbc->or2 = CFG_OR2_PRELIM; + lbc->or2 = CONFIG_SYS_OR2_PRELIM; asm("msync"); - lbc->br2 = CFG_BR2_PRELIM; + lbc->br2 = CONFIG_SYS_BR2_PRELIM; asm("msync"); - lbc->lbcr = CFG_LBC_LBCR; + lbc->lbcr = CONFIG_SYS_LBC_LBCR; asm("msync"); - lbc->lsrt = CFG_LBC_LSRT; - lbc->mrtpr = CFG_LBC_MRTPR; + lbc->lsrt = CONFIG_SYS_LBC_LSRT; + lbc->mrtpr = CONFIG_SYS_LBC_MRTPR; asm("msync"); /* * Determine which address lines to use baed on CPU board rev. */ cpu_board_rev = get_cpu_board_revision(); - lsdmr_common = CFG_LBC_LSDMR_COMMON; + lsdmr_common = CONFIG_SYS_LBC_LSDMR_COMMON; if (cpu_board_rev == MPC85XX_CPU_BOARD_REV_1_0) { - lsdmr_common |= CFG_LBC_LSDMR_BSMA1617; + lsdmr_common |= CONFIG_SYS_LBC_LSDMR_BSMA1617; } else if (cpu_board_rev == MPC85XX_CPU_BOARD_REV_1_1) { - lsdmr_common |= CFG_LBC_LSDMR_BSMA1516; + lsdmr_common |= CONFIG_SYS_LBC_LSDMR_BSMA1516; } else { /* * Assume something unable to identify itself is * really old, and likely has lines 16/17 mapped. */ - lsdmr_common |= CFG_LBC_LSDMR_BSMA1617; + lsdmr_common |= CONFIG_SYS_LBC_LSDMR_BSMA1617; } /* * Issue PRECHARGE ALL command. */ - lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_PCHALL; + lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_PCHALL; asm("sync;msync"); *sdram_addr = 0xff; ppcDcbf((unsigned long) sdram_addr); @@ -395,7 +395,7 @@ sdram_init(void) * Issue 8 AUTO REFRESH commands. */ for (idx = 0; idx < 8; idx++) { - lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_ARFRSH; + lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_ARFRSH; asm("sync;msync"); *sdram_addr = 0xff; ppcDcbf((unsigned long) sdram_addr); @@ -405,7 +405,7 @@ sdram_init(void) /* * Issue 8 MODE-set command. */ - lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_MRW; + lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_MRW; asm("sync;msync"); *sdram_addr = 0xff; ppcDcbf((unsigned long) sdram_addr); @@ -414,7 +414,7 @@ sdram_init(void) /* * Issue NORMAL OP command. */ - lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_NORMAL; + lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_NORMAL; asm("sync;msync"); *sdram_addr = 0xff; ppcDcbf((unsigned long) sdram_addr); diff --git a/board/freescale/mpc8555cds/tlb.c b/board/freescale/mpc8555cds/tlb.c index c5434a069..bf957c08c 100644 --- a/board/freescale/mpc8555cds/tlb.c +++ b/board/freescale/mpc8555cds/tlb.c @@ -28,16 +28,16 @@ struct fsl_e_tlb_entry tlb_table[] = { /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), @@ -46,7 +46,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * 0xff000000 16M FLASH * Out of reset this entry is only 4K. */ - SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE, + SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 0, BOOKE_PAGESZ_16M, 1), @@ -54,7 +54,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * TLB 1: 256M Non-cacheable, guarded * 0x80000000 256M PCI1 MEM First half */ - SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS, + SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 1, BOOKE_PAGESZ_256M, 1), @@ -62,7 +62,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * TLB 2: 256M Non-cacheable, guarded * 0x90000000 256M PCI1 MEM Second half */ - SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS + 0x10000000, CFG_PCI1_MEM_PHYS + 0x10000000, + SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 2, BOOKE_PAGESZ_256M, 1), @@ -70,7 +70,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * TLB 3: 256M Non-cacheable, guarded * 0xa0000000 256M PCI2 MEM First half */ - SET_TLB_ENTRY(1, CFG_PCI2_MEM_PHYS, CFG_PCI2_MEM_PHYS, + SET_TLB_ENTRY(1, CONFIG_SYS_PCI2_MEM_PHYS, CONFIG_SYS_PCI2_MEM_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 3, BOOKE_PAGESZ_256M, 1), @@ -78,7 +78,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * TLB 4: 256M Non-cacheable, guarded * 0xb0000000 256M PCI2 MEM Second half */ - SET_TLB_ENTRY(1, CFG_PCI2_MEM_PHYS + 0x10000000, CFG_PCI2_MEM_PHYS + 0x10000000, + SET_TLB_ENTRY(1, CONFIG_SYS_PCI2_MEM_PHYS + 0x10000000, CONFIG_SYS_PCI2_MEM_PHYS + 0x10000000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 4, BOOKE_PAGESZ_256M, 1), @@ -88,7 +88,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * 0xe200_0000 16M PCI1 IO * 0xe300_0000 16M PCI2 IO */ - SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS, + SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 5, BOOKE_PAGESZ_64M, 1), @@ -96,7 +96,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * TLB 6: 64M Cacheable, non-guarded * 0xf000_0000 64M LBC SDRAM */ - SET_TLB_ENTRY(1, CFG_LBC_SDRAM_BASE, CFG_LBC_SDRAM_BASE, + SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, CONFIG_SYS_LBC_SDRAM_BASE, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 6, BOOKE_PAGESZ_64M, 1), diff --git a/board/freescale/mpc8560ads/ddr.c b/board/freescale/mpc8560ads/ddr.c index 45372f427..7850794d6 100644 --- a/board/freescale/mpc8560ads/ddr.c +++ b/board/freescale/mpc8560ads/ddr.c @@ -10,6 +10,7 @@ #include <i2c.h> #include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_ddr_dimm_params.h> static void get_spd(ddr1_spd_eeprom_t *spd, unsigned char i2c_address) @@ -40,7 +41,9 @@ fsl_ddr_get_spd(ddr1_spd_eeprom_t *ctrl_dimms_spd, } } -void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num) +void fsl_ddr_board_options(memctl_options_t *popts, + dimm_params_t *pdimm, + unsigned int ctrl_num) { /* * Factors to consider for CPO: diff --git a/board/freescale/mpc8560ads/law.c b/board/freescale/mpc8560ads/law.c index 3b8bd05ad..7dd8f2958 100644 --- a/board/freescale/mpc8560ads/law.c +++ b/board/freescale/mpc8560ads/law.c @@ -46,13 +46,13 @@ struct law_entry law_table[] = { #ifndef CONFIG_SPD_EEPROM - SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR), + SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR), #endif - SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI), + SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI), /* This is not so much the SDRAM map as it is the whole localbus map. */ - SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC), - SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI), - SET_LAW(CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO), + SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC), + SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI), + SET_LAW(CONFIG_SYS_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO), }; int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/mpc8560ads/mpc8560ads.c b/board/freescale/mpc8560ads/mpc8560ads.c index 851fc5706..37308189d 100644 --- a/board/freescale/mpc8560ads/mpc8560ads.c +++ b/board/freescale/mpc8560ads/mpc8560ads.c @@ -217,7 +217,7 @@ typedef struct bcsr_ { void reset_phy (void) { #if defined(CONFIG_ETHER_ON_FCC) /* avoid compile warnings for now */ - volatile bcsr_t *bcsr = (bcsr_t *) CFG_BCSR; + volatile bcsr_t *bcsr = (bcsr_t *) CONFIG_SYS_BCSR; #endif /* reset Giga bit Ethernet port if needed here */ @@ -275,7 +275,7 @@ initdram(int board_type) #if defined(CONFIG_DDR_DLL) { - volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); uint temp_ddrdll = 0; /* @@ -320,8 +320,8 @@ initdram(int board_type) void local_bus_init(void) { - volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR); + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); uint clkdiv; uint lbc_hz; @@ -331,8 +331,8 @@ local_bus_init(void) * Errata LBC11. * Fix Local Bus clock glitch when DLL is enabled. * - * If localbus freq is < 66Mhz, DLL bypass mode must be used. - * If localbus freq is > 133Mhz, DLL can be safely enabled. + * If localbus freq is < 66MHz, DLL bypass mode must be used. + * If localbus freq is > 133MHz, DLL can be safely enabled. * Between 66 and 133, the DLL is enabled with an override workaround. */ @@ -341,10 +341,10 @@ local_bus_init(void) lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; if (lbc_hz < 66) { - lbc->lcrr = CFG_LBC_LCRR | 0x80000000; /* DLL Bypass */ + lbc->lcrr = CONFIG_SYS_LBC_LCRR | 0x80000000; /* DLL Bypass */ } else if (lbc_hz >= 133) { - lbc->lcrr = CFG_LBC_LCRR & (~0x80000000); /* DLL Enabled */ + lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~0x80000000); /* DLL Enabled */ } else { /* @@ -359,7 +359,7 @@ local_bus_init(void) lbc->lcrr = 0x10000004; } - lbc->lcrr = CFG_LBC_LCRR & (~0x80000000);/* DLL Enabled */ + lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~0x80000000);/* DLL Enabled */ udelay(200); /* @@ -380,52 +380,52 @@ local_bus_init(void) void sdram_init(void) { - volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR); - uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE; + volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; puts(" SDRAM: "); - print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); + print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); /* * Setup SDRAM Base and Option Registers */ - lbc->or2 = CFG_OR2_PRELIM; - lbc->br2 = CFG_BR2_PRELIM; - lbc->lbcr = CFG_LBC_LBCR; + lbc->or2 = CONFIG_SYS_OR2_PRELIM; + lbc->br2 = CONFIG_SYS_BR2_PRELIM; + lbc->lbcr = CONFIG_SYS_LBC_LBCR; asm("msync"); - lbc->lsrt = CFG_LBC_LSRT; - lbc->mrtpr = CFG_LBC_MRTPR; + lbc->lsrt = CONFIG_SYS_LBC_LSRT; + lbc->mrtpr = CONFIG_SYS_LBC_MRTPR; asm("sync"); /* * Configure the SDRAM controller. */ - lbc->lsdmr = CFG_LBC_LSDMR_1; + lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1; asm("sync"); *sdram_addr = 0xff; ppcDcbf((unsigned long) sdram_addr); udelay(100); - lbc->lsdmr = CFG_LBC_LSDMR_2; + lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2; asm("sync"); *sdram_addr = 0xff; ppcDcbf((unsigned long) sdram_addr); udelay(100); - lbc->lsdmr = CFG_LBC_LSDMR_3; + lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_3; asm("sync"); *sdram_addr = 0xff; ppcDcbf((unsigned long) sdram_addr); udelay(100); - lbc->lsdmr = CFG_LBC_LSDMR_4; + lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4; asm("sync"); *sdram_addr = 0xff; ppcDcbf((unsigned long) sdram_addr); udelay(100); - lbc->lsdmr = CFG_LBC_LSDMR_5; + lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; asm("sync"); *sdram_addr = 0xff; ppcDcbf((unsigned long) sdram_addr); @@ -438,15 +438,15 @@ sdram_init(void) ************************************************************************/ long int fixed_sdram (void) { - #ifndef CFG_RAMBOOT - volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR); - - ddr->cs0_bnds = CFG_DDR_CS0_BNDS; - ddr->cs0_config = CFG_DDR_CS0_CONFIG; - ddr->timing_cfg_1 = CFG_DDR_TIMING_1; - ddr->timing_cfg_2 = CFG_DDR_TIMING_2; - ddr->sdram_mode = CFG_DDR_MODE; - ddr->sdram_interval = CFG_DDR_INTERVAL; + #ifndef CONFIG_SYS_RAMBOOT + volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); + + ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS; + ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG; + ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; + ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; + ddr->sdram_mode = CONFIG_SYS_DDR_MODE; + ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL; #if defined (CONFIG_DDR_ECC) ddr->err_disable = 0x0000000D; ddr->err_sbe = 0x00ff0000; @@ -455,14 +455,14 @@ long int fixed_sdram (void) udelay(500); #if defined (CONFIG_DDR_ECC) /* Enable ECC checking */ - ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000); + ddr->sdram_cfg = (CONFIG_SYS_DDR_CONTROL | 0x20000000); #else - ddr->sdram_cfg = CFG_DDR_CONTROL; + ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL; #endif asm("sync; isync; msync"); udelay(500); #endif - return CFG_SDRAM_SIZE * 1024 * 1024; + return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; } #endif /* !defined(CONFIG_SPD_EEPROM) */ diff --git a/board/freescale/mpc8560ads/tlb.c b/board/freescale/mpc8560ads/tlb.c index 4fe2862f7..2ec3ccce9 100644 --- a/board/freescale/mpc8560ads/tlb.c +++ b/board/freescale/mpc8560ads/tlb.c @@ -28,16 +28,16 @@ struct fsl_e_tlb_entry tlb_table[] = { /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), @@ -46,7 +46,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * 0xff000000 16M FLASH * Out of reset this entry is only 4K. */ - SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE, + SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 0, BOOKE_PAGESZ_16M, 1), @@ -54,7 +54,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * TLB 1: 256M Non-cacheable, guarded * 0x80000000 256M PCI1 MEM First half */ - SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS, + SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 1, BOOKE_PAGESZ_256M, 1), @@ -62,7 +62,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * TLB 2: 256M Non-cacheable, guarded * 0x90000000 256M PCI1 MEM Second half */ - SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS + 0x10000000, CFG_PCI1_MEM_PHYS + 0x10000000, + SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 2, BOOKE_PAGESZ_256M, 1), @@ -70,7 +70,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * TLB 3: 256M Non-cacheable, guarded * 0xc0000000 256M Rapid IO MEM First half */ - SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE, CFG_RIO_MEM_BASE, + SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BASE, CONFIG_SYS_RIO_MEM_BASE, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 3, BOOKE_PAGESZ_256M, 1), @@ -78,7 +78,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * TLB 4: 256M Non-cacheable, guarded * 0xd0000000 256M Rapid IO MEM Second half */ - SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE + 0x10000000, CFG_RIO_MEM_BASE + 0x10000000, + SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BASE + 0x10000000, CONFIG_SYS_RIO_MEM_BASE + 0x10000000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 4, BOOKE_PAGESZ_256M, 1), @@ -87,7 +87,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * 0xe000_0000 1M CCSRBAR * 0xe200_0000 16M PCI1 IO */ - SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS, + SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 5, BOOKE_PAGESZ_64M, 1), @@ -95,7 +95,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * TLB 6: 64M Cacheable, non-guarded * 0xf000_0000 64M LBC SDRAM */ - SET_TLB_ENTRY(1, CFG_LBC_SDRAM_BASE, CFG_LBC_SDRAM_BASE, + SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, CONFIG_SYS_LBC_SDRAM_BASE, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 6, BOOKE_PAGESZ_64M, 1), @@ -103,7 +103,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * TLB 7: 16K Non-cacheable, guarded * 0xf8000000 16K BCSR registers */ - SET_TLB_ENTRY(1, CFG_BCSR, CFG_BCSR, + SET_TLB_ENTRY(1, CONFIG_SYS_BCSR, CONFIG_SYS_BCSR, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 7, BOOKE_PAGESZ_16K, 1), @@ -117,11 +117,11 @@ struct fsl_e_tlb_entry tlb_table[] = { * Likely it needs to be increased by two for these entries. */ #error("Update the number of table entries in tlb1_entry") - SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE, CFG_DDR_SDRAM_BASE, + SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 8, BOOKE_PAGESZ_64M, 1), - SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE + 0x4000000, CFG_DDR_SDRAM_BASE + 0x4000000, + SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 9, BOOKE_PAGESZ_64M, 1), #endif diff --git a/board/freescale/mpc8568mds/bcsr.c b/board/freescale/mpc8568mds/bcsr.c index 791a50fc9..30676e1e1 100644 --- a/board/freescale/mpc8568mds/bcsr.c +++ b/board/freescale/mpc8568mds/bcsr.c @@ -27,9 +27,9 @@ void enable_8568mds_duart() { - volatile uint* duart_mux = (uint *)(CFG_CCSRBAR + 0xe0060); - volatile uint* devices = (uint *)(CFG_CCSRBAR + 0xe0070); - volatile u8 *bcsr = (u8 *)(CFG_BCSR); + volatile uint* duart_mux = (uint *)(CONFIG_SYS_CCSRBAR + 0xe0060); + volatile uint* devices = (uint *)(CONFIG_SYS_CCSRBAR + 0xe0070); + volatile u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR); *duart_mux = 0x80000000; /* Set the mux to Duart on PMUXCR */ *devices = 0; /* Enable all peripheral devices */ @@ -38,21 +38,21 @@ void enable_8568mds_duart() void enable_8568mds_flash_write() { - volatile u8 *bcsr = (u8 *)(CFG_BCSR); + volatile u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR); bcsr[9] |= 0x01; } void disable_8568mds_flash_write() { - volatile u8 *bcsr = (u8 *)(CFG_BCSR); + volatile u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR); bcsr[9] &= ~(0x01); } void enable_8568mds_qe_mdio() { - u8 *bcsr = (u8 *)(CFG_BCSR); + u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR); bcsr[7] |= 0x01; } @@ -60,7 +60,7 @@ void enable_8568mds_qe_mdio() #if defined(CONFIG_UEC_ETH1) || defined(CONFIG_UEC_ETH2) void reset_8568mds_uccs(void) { - volatile u8 *bcsr = (u8 *)(CFG_BCSR); + volatile u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR); /* Turn off UCC1 & UCC2 */ out_8(&bcsr[8], in_8(&bcsr[8]) & ~BCSR_UCC1_GETH_EN); diff --git a/board/freescale/mpc8568mds/ddr.c b/board/freescale/mpc8568mds/ddr.c index 1b8ecec5a..482fd919f 100644 --- a/board/freescale/mpc8568mds/ddr.c +++ b/board/freescale/mpc8568mds/ddr.c @@ -10,6 +10,7 @@ #include <i2c.h> #include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_ddr_dimm_params.h> static void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) @@ -38,7 +39,9 @@ void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, } } -void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num) +void fsl_ddr_board_options(memctl_options_t *popts, + dimm_params_t *pdimm, + unsigned int ctrl_num) { /* * Factors to consider for clock adjust: diff --git a/board/freescale/mpc8568mds/law.c b/board/freescale/mpc8568mds/law.c index 3bc24c5c9..da7b6dcb7 100644 --- a/board/freescale/mpc8568mds/law.c +++ b/board/freescale/mpc8568mds/law.c @@ -50,13 +50,13 @@ */ struct law_entry law_table[] = { - SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI), - SET_LAW(CFG_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1), - SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCI), - SET_LAW(CFG_PCIE1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_1), - SET_LAW(CFG_SRIO_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_RIO), + SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI), + SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1), + SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCI), + SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_1), + SET_LAW(CONFIG_SYS_SRIO_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_RIO), /* LBC window - maps 256M. That's SDRAM, BCSR, PIBs, and Flash */ - SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC), + SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC), }; int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/mpc8568mds/mpc8568mds.c b/board/freescale/mpc8568mds/mpc8568mds.c index f9e35cc7e..bc93be80f 100644 --- a/board/freescale/mpc8568mds/mpc8568mds.c +++ b/board/freescale/mpc8568mds/mpc8568mds.c @@ -99,11 +99,6 @@ const qe_iop_conf_t qe_iop_conf_tab[] = { {0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */ }; - -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) -extern void ddr_enable_ecc(unsigned int dram_size); -#endif - void local_bus_init(void); void sdram_init(void); @@ -123,10 +118,10 @@ int board_early_init_f (void) enable_8568mds_qe_mdio(); #endif -#ifdef CFG_I2C2_OFFSET +#ifdef CONFIG_SYS_I2C2_OFFSET /* Enable I2C2_SCL and I2C2_SDA */ volatile struct par_io *port_c; - port_c = (struct par_io*)(CFG_IMMR + 0xe0140); + port_c = (struct par_io*)(CONFIG_SYS_IMMR + 0xe0140); port_c->cpdir2 |= 0x0f000000; port_c->cppar2 &= ~0x0f000000; port_c->cppar2 |= 0x0a000000; @@ -158,7 +153,7 @@ initdram(int board_type) * Override DLL = 1, Course Adj = 1, Tap Select = 0 */ - volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); gur->ddrdllcr = 0x81000000; asm("sync;isync;msync"); @@ -170,13 +165,6 @@ initdram(int board_type) dram_size = setup_ddr_tlbs(dram_size / 0x100000); dram_size *= 0x100000; -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - /* - * Initialize and enable DDR ECC. - */ - ddr_enable_ecc(dram_size); -#endif - /* * SDRAM Initialization */ @@ -192,8 +180,8 @@ initdram(int board_type) void local_bus_init(void) { - volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR); + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); uint clkdiv; uint lbc_hz; @@ -223,44 +211,44 @@ local_bus_init(void) void sdram_init(void) { -#if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM) +#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM) uint idx; - volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR); - uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE; + volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; uint lsdmr_common; puts(" SDRAM: "); - print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); + print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); /* * Setup SDRAM Base and Option Registers */ - lbc->or2 = CFG_OR2_PRELIM; + lbc->or2 = CONFIG_SYS_OR2_PRELIM; asm("msync"); - lbc->br2 = CFG_BR2_PRELIM; + lbc->br2 = CONFIG_SYS_BR2_PRELIM; asm("msync"); - lbc->lbcr = CFG_LBC_LBCR; + lbc->lbcr = CONFIG_SYS_LBC_LBCR; asm("msync"); - lbc->lsrt = CFG_LBC_LSRT; - lbc->mrtpr = CFG_LBC_MRTPR; + lbc->lsrt = CONFIG_SYS_LBC_LSRT; + lbc->mrtpr = CONFIG_SYS_LBC_MRTPR; asm("msync"); /* * MPC8568 uses "new" 15-16 style addressing. */ - lsdmr_common = CFG_LBC_LSDMR_COMMON; - lsdmr_common |= CFG_LBC_LSDMR_BSMA1516; + lsdmr_common = CONFIG_SYS_LBC_LSDMR_COMMON; + lsdmr_common |= CONFIG_SYS_LBC_LSDMR_BSMA1516; /* * Issue PRECHARGE ALL command. */ - lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_PCHALL; + lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_PCHALL; asm("sync;msync"); *sdram_addr = 0xff; ppcDcbf((unsigned long) sdram_addr); @@ -270,7 +258,7 @@ sdram_init(void) * Issue 8 AUTO REFRESH commands. */ for (idx = 0; idx < 8; idx++) { - lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_ARFRSH; + lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_ARFRSH; asm("sync;msync"); *sdram_addr = 0xff; ppcDcbf((unsigned long) sdram_addr); @@ -280,7 +268,7 @@ sdram_init(void) /* * Issue 8 MODE-set command. */ - lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_MRW; + lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_MRW; asm("sync;msync"); *sdram_addr = 0xff; ppcDcbf((unsigned long) sdram_addr); @@ -289,7 +277,7 @@ sdram_init(void) /* * Issue NORMAL OP command. */ - lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_NORMAL; + lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_NORMAL; asm("sync;msync"); *sdram_addr = 0xff; ppcDcbf((unsigned long) sdram_addr); @@ -323,6 +311,9 @@ static struct pci_controller pci1_hose = { static struct pci_controller pcie1_hose; #endif /* CONFIG_PCIE1 */ +extern int fsl_pci_setup_inbound_windows(struct pci_region *r); +extern void fsl_pci_init(struct pci_controller *hose); + int first_free_busno = 0; /* @@ -371,7 +362,7 @@ pib_init(void) void pci_init_board(void) { - volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16; @@ -379,9 +370,9 @@ pci_init_board(void) { pib_init(); - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR; struct pci_controller *hose = &pci1_hose; + struct pci_region *r = hose->regions; uint pci_32 = 1; /* PORDEVSR[15] */ uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; /* PORDEVSR[14] */ @@ -402,27 +393,23 @@ pci_init_board(void) ); /* inbound */ - pci_set_region(hose->regions + 0, - CFG_PCI_MEMORY_BUS, - CFG_PCI_MEMORY_PHYS, - CFG_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, - CFG_PCI1_MEM_BASE, - CFG_PCI1_MEM_PHYS, - CFG_PCI1_MEM_SIZE, + pci_set_region(r++, + CONFIG_SYS_PCI1_MEM_BASE, + CONFIG_SYS_PCI1_MEM_PHYS, + CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, - CFG_PCI1_IO_BASE, - CFG_PCI1_IO_PHYS, - CFG_PCI1_IO_SIZE, + pci_set_region(r++, + CONFIG_SYS_PCI1_IO_BASE, + CONFIG_SYS_PCI1_IO_PHYS, + CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; + hose->region_count = r - hose->regions; hose->first_busno = first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); @@ -440,10 +427,10 @@ pci_init_board(void) #ifdef CONFIG_PCIE1 { - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR; struct pci_controller *hose = &pcie1_hose; int pcie_ep = (host_agent == 0) || (host_agent == 2 ) || (host_agent == 3); + struct pci_region *r = hose->regions; int pcie_configured = io_sel >= 1; @@ -459,27 +446,23 @@ pci_init_board(void) printf ("\n"); /* inbound */ - pci_set_region(hose->regions + 0, - CFG_PCI_MEMORY_BUS, - CFG_PCI_MEMORY_PHYS, - CFG_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, - CFG_PCIE1_MEM_BASE, - CFG_PCIE1_MEM_PHYS, - CFG_PCIE1_MEM_SIZE, + pci_set_region(r++, + CONFIG_SYS_PCIE1_MEM_BASE, + CONFIG_SYS_PCIE1_MEM_PHYS, + CONFIG_SYS_PCIE1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, - CFG_PCIE1_IO_BASE, - CFG_PCIE1_IO_PHYS, - CFG_PCIE1_IO_SIZE, + pci_set_region(r++, + CONFIG_SYS_PCIE1_IO_BASE, + CONFIG_SYS_PCIE1_IO_PHYS, + CONFIG_SYS_PCIE1_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; + hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); @@ -500,31 +483,18 @@ pci_init_board(void) #endif /* CONFIG_PCI */ #if defined(CONFIG_OF_BOARD_SETUP) -void -ft_board_setup(void *blob, bd_t *bd) -{ - int node, tmp[2]; - const char *path; +extern void ft_fsl_pci_setup(void *blob, const char *pci_alias, + struct pci_controller *hose); +void ft_board_setup(void *blob, bd_t *bd) +{ ft_cpu_setup(blob, bd); - node = fdt_path_offset(blob, "/aliases"); - tmp[0] = 0; - if (node >= 0) { #ifdef CONFIG_PCI1 - path = fdt_getprop(blob, node, "pci0", NULL); - if (path) { - tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + ft_fsl_pci_setup(blob, "pci0", &pci1_hose); #endif #ifdef CONFIG_PCIE1 - path = fdt_getprop(blob, node, "pci1", NULL); - if (path) { - tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + ft_fsl_pci_setup(blob, "pci1", &pcie1_hose); #endif - } } #endif diff --git a/board/freescale/mpc8568mds/tlb.c b/board/freescale/mpc8568mds/tlb.c index 75651765f..107755273 100644 --- a/board/freescale/mpc8568mds/tlb.c +++ b/board/freescale/mpc8568mds/tlb.c @@ -28,16 +28,16 @@ struct fsl_e_tlb_entry tlb_table[] = { /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), @@ -47,7 +47,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * 0xff000000 16M FLASH (upper half) * Out of reset this entry is only 4K. */ - SET_TLB_ENTRY(1, CFG_FLASH_BASE + 0x1000000, CFG_FLASH_BASE + 0x1000000, + SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE + 0x1000000, CONFIG_SYS_FLASH_BASE + 0x1000000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 0, BOOKE_PAGESZ_16M, 1), @@ -55,7 +55,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * TLBe 1: 16M Non-cacheable, guarded * 0xfe000000 16M FLASH (lower half) */ - SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE, + SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 1, BOOKE_PAGESZ_16M, 1), @@ -64,7 +64,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * 0x80000000 512M PCI1 MEM * 0xa0000000 512M PCIe MEM */ - SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS, + SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 2, BOOKE_PAGESZ_1G, 1), @@ -74,7 +74,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * 0xe200_0000 8M PCI1 IO * 0xe280_0000 8M PCIe IO */ - SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS, + SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 3, BOOKE_PAGESZ_64M, 1), @@ -82,7 +82,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * TLBe 4: 64M Cacheable, non-guarded * 0xf000_0000 64M LBC SDRAM */ - SET_TLB_ENTRY(1, CFG_LBC_SDRAM_BASE, CFG_LBC_SDRAM_BASE, + SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, CONFIG_SYS_LBC_SDRAM_BASE, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 4, BOOKE_PAGESZ_64M, 1), @@ -92,7 +92,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * 0xf8008000 32K PIB (CS4) * 0xf8010000 32K PIB (CS5) */ - SET_TLB_ENTRY(1, CFG_BCSR_BASE, CFG_BCSR_BASE, + SET_TLB_ENTRY(1, CONFIG_SYS_BCSR_BASE, CONFIG_SYS_BCSR_BASE, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 5, BOOKE_PAGESZ_256K, 1), }; diff --git a/board/freescale/mpc8572ds/ddr.c b/board/freescale/mpc8572ds/ddr.c index 5f8c55504..d66ede2d5 100644 --- a/board/freescale/mpc8572ds/ddr.c +++ b/board/freescale/mpc8572ds/ddr.c @@ -10,6 +10,7 @@ #include <i2c.h> #include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_ddr_dimm_params.h> static void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) { @@ -38,40 +39,108 @@ void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, } } -void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num) +typedef struct { + u32 datarate_mhz_low; + u32 datarate_mhz_high; + u32 n_ranks; + u32 clk_adjust; + u32 cpo; + u32 write_data_delay; + u32 force_2T; +} board_specific_parameters_t; + +/* ranges for parameters: + * wr_data_delay = 0-6 + * clk adjust = 0-8 + * cpo 2-0x1E (30) + */ + + +/* XXX: these values need to be checked for all interleaving modes. */ +/* XXX: No reliable dual-rank 800 MHz setting has been found. It may + * seem reliable, but errors will appear when memory intensive + * program is run. */ +/* XXX: Single rank at 800 MHz is OK. */ +const board_specific_parameters_t board_specific_parameters[][20] = { + { + /* memory controller 0 */ + /* lo| hi| num| clk| cpo|wrdata|2T */ + /* mhz| mhz|ranks|adjst| | delay| */ + { 0, 333, 2, 6, 7, 3, 0}, + {334, 400, 2, 6, 9, 3, 0}, + {401, 549, 2, 6, 11, 3, 0}, + {550, 680, 2, 1, 10, 5, 0}, + {681, 850, 2, 1, 12, 5, 1}, + { 0, 333, 1, 6, 7, 3, 0}, + {334, 400, 1, 6, 9, 3, 0}, + {401, 549, 1, 6, 11, 3, 0}, + {550, 680, 1, 1, 10, 5, 0}, + {681, 850, 1, 1, 12, 5, 0} + }, + + { + /* memory controller 1 */ + /* lo| hi| num| clk| cpo|wrdata|2T */ + /* mhz| mhz|ranks|adjst| | delay| */ + { 0, 333, 2, 6, 7, 3, 0}, + {334, 400, 2, 6, 9, 3, 0}, + {401, 549, 2, 6, 11, 3, 0}, + {550, 680, 2, 1, 11, 6, 0}, + {681, 850, 2, 1, 13, 6, 1}, + { 0, 333, 1, 6, 7, 3, 0}, + {334, 400, 1, 6, 9, 3, 0}, + {401, 549, 1, 6, 11, 3, 0}, + {550, 680, 1, 1, 11, 6, 0}, + {681, 850, 1, 1, 13, 6, 0} + } +}; + +void fsl_ddr_board_options(memctl_options_t *popts, + dimm_params_t *pdimm, + unsigned int ctrl_num) { - /* - * Factors to consider for clock adjust: - * - number of chips on bus - * - position of slot - * - DDR1 vs. DDR2? - * - ??? - * - * This needs to be determined on a board-by-board basis. - * 0110 3/4 cycle late - * 0111 7/8 cycle late - */ - popts->clk_adjust = 7; + const board_specific_parameters_t *pbsp = + &(board_specific_parameters[ctrl_num][0]); + u32 num_params = sizeof(board_specific_parameters[ctrl_num]) / + sizeof(board_specific_parameters[0][0]); + u32 i; + ulong ddr_freq; - /* - * Factors to consider for CPO: - * - frequency - * - ddr1 vs. ddr2 + /* set odt_rd_cfg and odt_wr_cfg. If the there is only one dimm in + * that controller, set odt_wr_cfg to 4 for CS0, and 0 to CS1. If + * there are two dimms in the controller, set odt_rd_cfg to 3 and + * odt_wr_cfg to 3 for the even CS, 0 for the odd CS. */ - popts->cpo_override = 10; + for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { + if (i&1) { /* odd CS */ + popts->cs_local_opts[i].odt_rd_cfg = 0; + popts->cs_local_opts[i].odt_wr_cfg = 0; + } else { /* even CS */ + if (CONFIG_DIMM_SLOTS_PER_CTLR == 1) { + popts->cs_local_opts[i].odt_rd_cfg = 0; + popts->cs_local_opts[i].odt_wr_cfg = 4; + } else if (CONFIG_DIMM_SLOTS_PER_CTLR == 2) { + popts->cs_local_opts[i].odt_rd_cfg = 3; + popts->cs_local_opts[i].odt_wr_cfg = 3; + } + } + } - /* - * Factors to consider for write data delay: - * - number of DIMMs - * - * 1 = 1/4 clock delay - * 2 = 1/2 clock delay - * 3 = 3/4 clock delay - * 4 = 1 clock delay - * 5 = 5/4 clock delay - * 6 = 3/2 clock delay + /* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr + * freqency and n_banks specified in board_specific_parameters table. */ - popts->write_data_delay = 5; + ddr_freq = get_ddr_freq(0) / 1000000; + for (i = 0; i < num_params; i++) { + if (ddr_freq >= pbsp->datarate_mhz_low && + ddr_freq <= pbsp->datarate_mhz_high && + pdimm->n_ranks == pbsp->n_ranks) { + popts->clk_adjust = pbsp->clk_adjust; + popts->cpo_override = pbsp->cpo; + popts->write_data_delay = pbsp->write_data_delay; + popts->twoT_en = pbsp->force_2T; + } + pbsp++; + } /* * Factors to consider for half-strength driver enable: diff --git a/board/freescale/mpc8572ds/law.c b/board/freescale/mpc8572ds/law.c index d69b59345..83eb6811c 100644 --- a/board/freescale/mpc8572ds/law.c +++ b/board/freescale/mpc8572ds/law.c @@ -28,14 +28,15 @@ #include <asm/mmu.h> struct law_entry law_table[] = { - SET_LAW(CFG_FLASH_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC), - SET_LAW(CFG_PCIE1_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_1), - SET_LAW(CFG_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1), - SET_LAW(CFG_PCIE2_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_2), - SET_LAW(CFG_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2), - SET_LAW(CFG_PCIE3_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_3), - SET_LAW(CFG_PCIE3_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_3), + SET_LAW(CONFIG_SYS_FLASH_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC), + SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_1), + SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1), + SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_2), + SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2), + SET_LAW(CONFIG_SYS_PCIE3_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_3), + SET_LAW(CONFIG_SYS_PCIE3_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_3), SET_LAW(PIXIS_BASE, LAW_SIZE_4K, LAW_TRGT_IF_LBC), + SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC), }; int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c index 70b548bc3..a14db5ad2 100644 --- a/board/freescale/mpc8572ds/mpc8572ds.c +++ b/board/freescale/mpc8572ds/mpc8572ds.c @@ -25,6 +25,7 @@ #include <pci.h> #include <asm/processor.h> #include <asm/mmu.h> +#include <asm/cache.h> #include <asm/immap_85xx.h> #include <asm/immap_fsl_pci.h> #include <asm/fsl_ddr_sdram.h> @@ -32,12 +33,10 @@ #include <miiphy.h> #include <libfdt.h> #include <fdt_support.h> +#include <tsec.h> #include "../common/pixis.h" - -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) -extern void ddr_enable_ecc(unsigned int dram_size); -#endif +#include "../common/sgmii_riser.h" long int fixed_sdram(void); @@ -58,20 +57,12 @@ phys_size_t initdram(int board_type) #ifdef CONFIG_SPD_EEPROM dram_size = fsl_ddr_sdram(); - - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - - dram_size *= 0x100000; #else dram_size = fixed_sdram(); #endif + dram_size = setup_ddr_tlbs(dram_size / 0x100000); + dram_size *= 0x100000; -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - /* - * Initialize and enable DDR ECC. - */ - ddr_enable_ecc(dram_size); -#endif puts(" DDR: "); return dram_size; } @@ -83,34 +74,34 @@ phys_size_t initdram(int board_type) phys_size_t fixed_sdram (void) { - volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; volatile ccsr_ddr_t *ddr= &immap->im_ddr; uint d_init; - ddr->cs0_bnds = CFG_DDR_CS0_BNDS; - ddr->cs0_config = CFG_DDR_CS0_CONFIG; + ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS; + ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG; - ddr->timing_cfg_3 = CFG_DDR_TIMING_3; - ddr->timing_cfg_0 = CFG_DDR_TIMING_0; - ddr->timing_cfg_1 = CFG_DDR_TIMING_1; - ddr->timing_cfg_2 = CFG_DDR_TIMING_2; - ddr->sdram_mode = CFG_DDR_MODE_1; - ddr->sdram_mode_2 = CFG_DDR_MODE_2; - ddr->sdram_interval = CFG_DDR_INTERVAL; - ddr->sdram_data_init = CFG_DDR_DATA_INIT; - ddr->sdram_clk_cntl = CFG_DDR_CLK_CTRL; - ddr->sdram_cfg_2 = CFG_DDR_CONTROL2; + ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3; + ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0; + ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; + ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; + ddr->sdram_mode = CONFIG_SYS_DDR_MODE_1; + ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2; + ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL; + ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT; + ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL; + ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL2; #if defined (CONFIG_DDR_ECC) - ddr->err_int_en = CFG_DDR_ERR_INT_EN; - ddr->err_disable = CFG_DDR_ERR_DIS; - ddr->err_sbe = CFG_DDR_SBE; + ddr->err_int_en = CONFIG_SYS_DDR_ERR_INT_EN; + ddr->err_disable = CONFIG_SYS_DDR_ERR_DIS; + ddr->err_sbe = CONFIG_SYS_DDR_SBE; #endif asm("sync;isync"); udelay(500); - ddr->sdram_cfg = CFG_DDR_CONTROL; + ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL; #if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) d_init = 1; @@ -144,11 +135,14 @@ static struct pci_controller pcie2_hose; static struct pci_controller pcie3_hose; #endif +extern int fsl_pci_setup_inbound_windows(struct pci_region *r); +extern void fsl_pci_init(struct pci_controller *hose); + int first_free_busno=0; #ifdef CONFIG_PCI void pci_init_board(void) { - volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); uint devdisr = gur->devdisr; uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16; @@ -168,12 +162,12 @@ void pci_init_board(void) #ifdef CONFIG_PCIE3 { - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE3_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR; struct pci_controller *hose = &pcie3_hose; int pcie_ep = (host_agent == 0) || (host_agent == 3) || (host_agent == 5) || (host_agent == 6); int pcie_configured = io_sel >= 1; + struct pci_region *r = hose->regions; u32 temp32; if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ @@ -187,27 +181,23 @@ void pci_init_board(void) printf ("\n"); /* inbound */ - pci_set_region(hose->regions + 0, - CFG_PCI_MEMORY_BUS, - CFG_PCI_MEMORY_PHYS, - CFG_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, - CFG_PCIE3_MEM_BASE, - CFG_PCIE3_MEM_PHYS, - CFG_PCIE3_MEM_SIZE, + pci_set_region(r++, + CONFIG_SYS_PCIE3_MEM_BASE, + CONFIG_SYS_PCIE3_MEM_PHYS, + CONFIG_SYS_PCIE3_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, - CFG_PCIE3_IO_BASE, - CFG_PCIE3_IO_PHYS, - CFG_PCIE3_IO_SIZE, + pci_set_region(r++, + CONFIG_SYS_PCIE3_IO_BASE, + CONFIG_SYS_PCIE3_IO_PHYS, + CONFIG_SYS_PCIE3_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; + hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); @@ -225,7 +215,7 @@ void pci_init_board(void) pci_hose_read_config_dword(hose, PCI_BDF(2, 0x1d, 0 ), PCI_BASE_ADDRESS_1, &temp32); - if (temp32 >= CFG_PCIE3_MEM_PHYS) { + if (temp32 >= CONFIG_SYS_PCIE3_MEM_PHYS) { debug(" uli1572 read to %x\n", temp32); in_be32((unsigned *)temp32); } @@ -240,12 +230,12 @@ void pci_init_board(void) #ifdef CONFIG_PCIE2 { - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE2_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR; struct pci_controller *hose = &pcie2_hose; int pcie_ep = (host_agent == 2) || (host_agent == 4) || - (host_agent == 6); + (host_agent == 6) || (host_agent == 0); int pcie_configured = io_sel & 4; + struct pci_region *r = hose->regions; if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ printf ("\n PCIE2 connected to Slot 1 as %s (base address %x)", @@ -258,27 +248,23 @@ void pci_init_board(void) printf ("\n"); /* inbound */ - pci_set_region(hose->regions + 0, - CFG_PCI_MEMORY_BUS, - CFG_PCI_MEMORY_PHYS, - CFG_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, - CFG_PCIE2_MEM_BASE, - CFG_PCIE2_MEM_PHYS, - CFG_PCIE2_MEM_SIZE, + pci_set_region(r++, + CONFIG_SYS_PCIE2_MEM_BASE, + CONFIG_SYS_PCIE2_MEM_PHYS, + CONFIG_SYS_PCIE2_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, - CFG_PCIE2_IO_BASE, - CFG_PCIE2_IO_PHYS, - CFG_PCIE2_IO_SIZE, + pci_set_region(r++, + CONFIG_SYS_PCIE2_IO_BASE, + CONFIG_SYS_PCIE2_IO_PHYS, + CONFIG_SYS_PCIE2_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; + hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); @@ -297,12 +283,12 @@ void pci_init_board(void) #endif #ifdef CONFIG_PCIE1 { - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR; struct pci_controller *hose = &pcie1_hose; - int pcie_ep = (host_agent == 1) || (host_agent == 4) || + int pcie_ep = (host_agent <= 1) || (host_agent == 4) || (host_agent == 5); int pcie_configured = io_sel & 6; + struct pci_region *r = hose->regions; if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ printf ("\n PCIE1 connected to Slot 2 as %s (base address %x)", @@ -315,27 +301,23 @@ void pci_init_board(void) printf ("\n"); /* inbound */ - pci_set_region(hose->regions + 0, - CFG_PCI_MEMORY_BUS, - CFG_PCI_MEMORY_PHYS, - CFG_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, - CFG_PCIE1_MEM_BASE, - CFG_PCIE1_MEM_PHYS, - CFG_PCIE1_MEM_SIZE, + pci_set_region(r++, + CONFIG_SYS_PCIE1_MEM_BASE, + CONFIG_SYS_PCIE1_MEM_PHYS, + CONFIG_SYS_PCIE1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, - CFG_PCIE1_IO_BASE, - CFG_PCIE1_IO_PHYS, - CFG_PCIE1_IO_SIZE, + pci_set_region(r++, + CONFIG_SYS_PCIE1_IO_BASE, + CONFIG_SYS_PCIE1_IO_PHYS, + CONFIG_SYS_PCIE1_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; + hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); @@ -359,8 +341,7 @@ void pci_init_board(void) int board_early_init_r(void) { - unsigned int i; - const unsigned int flashbase = CFG_FLASH_BASE; + const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; const u8 flash_esel = 2; /* @@ -368,11 +349,9 @@ int board_early_init_r(void) * so that flash can be erased properly. */ - /* Invalidate any remaining lines of the flash from caches. */ - for (i = 0; i < 256*1024*1024; i+=32) { - asm volatile ("dcbi %0,%1": : "b" (flashbase), "r" (i)); - asm volatile ("icbi %0,%1": : "b" (flashbase), "r" (i)); - } + /* Flush d-cache and invalidate i-cache of any FLASH data */ + flush_dcache(); + invalidate_icache(); /* invalidate existing TLB entry for flash + promjet */ disable_tlb(flash_esel); @@ -521,11 +500,58 @@ unsigned long get_board_ddr_clk(ulong dummy) } #endif +#ifdef CONFIG_TSEC_ENET +int board_eth_init(bd_t *bis) +{ + struct tsec_info_struct tsec_info[4]; + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + int num = 0; + +#ifdef CONFIG_TSEC1 + SET_STD_TSEC_INFO(tsec_info[num], 1); + if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS)) + tsec_info[num].flags |= TSEC_SGMII; + num++; +#endif +#ifdef CONFIG_TSEC2 + SET_STD_TSEC_INFO(tsec_info[num], 2); + if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS)) + tsec_info[num].flags |= TSEC_SGMII; + num++; +#endif +#ifdef CONFIG_TSEC3 + SET_STD_TSEC_INFO(tsec_info[num], 3); + if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS)) + tsec_info[num].flags |= TSEC_SGMII; + num++; +#endif +#ifdef CONFIG_TSEC4 + SET_STD_TSEC_INFO(tsec_info[num], 4); + if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII4_DIS)) + tsec_info[num].flags |= TSEC_SGMII; + num++; +#endif + + if (!num) { + printf("No TSECs initialized\n"); + + return 0; + } + + fsl_sgmii_riser_init(tsec_info, num); + + tsec_eth_init(bis, tsec_info, num); + + return 0; +} +#endif + #if defined(CONFIG_OF_BOARD_SETUP) +extern void ft_fsl_pci_setup(void *blob, const char *pci_alias, + struct pci_controller *hose); + void ft_board_setup(void *blob, bd_t *bd) { - int node, tmp[2]; - const char *path; ulong base, size; ft_cpu_setup(blob, bd); @@ -535,31 +561,15 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_fixup_memory(blob, (u64)base, (u64)size); - node = fdt_path_offset(blob, "/aliases"); - tmp[0] = 0; - if (node >= 0) { #ifdef CONFIG_PCIE3 - path = fdt_getprop(blob, node, "pci0", NULL); - if (path) { - tmp[1] = pcie3_hose.last_busno - pcie3_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + ft_fsl_pci_setup(blob, "pci0", &pcie3_hose); #endif #ifdef CONFIG_PCIE2 - path = fdt_getprop(blob, node, "pci1", NULL); - if (path) { - tmp[1] = pcie2_hose.last_busno - pcie2_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + ft_fsl_pci_setup(blob, "pci1", &pcie2_hose); #endif #ifdef CONFIG_PCIE1 - path = fdt_getprop(blob, node, "pci2", NULL); - if (path) { - tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + ft_fsl_pci_setup(blob, "pci2", &pcie1_hose); #endif - } } #endif diff --git a/board/freescale/mpc8572ds/tlb.c b/board/freescale/mpc8572ds/tlb.c index 965356a84..8d1f646fa 100644 --- a/board/freescale/mpc8572ds/tlb.c +++ b/board/freescale/mpc8572ds/tlb.c @@ -28,16 +28,16 @@ struct fsl_e_tlb_entry tlb_table[] = { /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), @@ -52,34 +52,40 @@ struct fsl_e_tlb_entry tlb_table[] = { 0, 0, BOOKE_PAGESZ_4K, 1), /* *I*G* - CCSRBAR */ - SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS, + SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 1, BOOKE_PAGESZ_1M, 1), /* W**G* - Flash/promjet, localbus */ /* This will be changed to *I*G* after relocation to RAM. */ - SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_W|MAS2_G, + SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE, + MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, 0, 2, BOOKE_PAGESZ_256M, 1), /* *I*G* - PCI */ - SET_TLB_ENTRY(1, CFG_PCIE3_MEM_PHYS, CFG_PCIE3_MEM_PHYS, + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_PHYS, CONFIG_SYS_PCIE3_MEM_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 3, BOOKE_PAGESZ_1G, 1), /* *I*G* - PCI */ - SET_TLB_ENTRY(1, CFG_PCIE3_MEM_PHYS + 0x40000000, CFG_PCIE3_MEM_PHYS + 0x40000000, + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_PHYS + 0x40000000, CONFIG_SYS_PCIE3_MEM_PHYS + 0x40000000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 4, BOOKE_PAGESZ_256M, 1), - SET_TLB_ENTRY(1, CFG_PCIE3_MEM_PHYS + 0x50000000, CFG_PCIE3_MEM_PHYS + 0x50000000, + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_PHYS + 0x50000000, CONFIG_SYS_PCIE3_MEM_PHYS + 0x50000000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 5, BOOKE_PAGESZ_256M, 1), /* *I*G* - PCI I/O */ - SET_TLB_ENTRY(1, CFG_PCIE3_IO_PHYS, CFG_PCIE3_IO_PHYS, + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_IO_PHYS, CONFIG_SYS_PCIE3_IO_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 6, BOOKE_PAGESZ_256K, 1), + + /* *I*G - NAND */ + SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 7, BOOKE_PAGESZ_1M, 1), + }; int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/freescale/mpc8610hpcd/ddr.c b/board/freescale/mpc8610hpcd/ddr.c index 2d22da177..414ac243a 100644 --- a/board/freescale/mpc8610hpcd/ddr.c +++ b/board/freescale/mpc8610hpcd/ddr.c @@ -10,6 +10,7 @@ #include <i2c.h> #include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_ddr_dimm_params.h> static void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) @@ -36,7 +37,9 @@ void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, } } -void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num) +void fsl_ddr_board_options(memctl_options_t *popts, + dimm_params_t *pdimm, + unsigned int ctrl_num) { /* * Factors to consider for clock adjust: diff --git a/board/freescale/mpc8610hpcd/law.c b/board/freescale/mpc8610hpcd/law.c index 91b922b86..2aad28aee 100644 --- a/board/freescale/mpc8610hpcd/law.c +++ b/board/freescale/mpc8610hpcd/law.c @@ -29,16 +29,16 @@ struct law_entry law_table[] = { #if !defined(CONFIG_SPD_EEPROM) - SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR_1), + SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR_1), #endif - SET_LAW(CFG_PCIE1_MEM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_1), - SET_LAW(CFG_PCIE2_MEM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_2), + SET_LAW(CONFIG_SYS_PCIE1_MEM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_1), + SET_LAW(CONFIG_SYS_PCIE2_MEM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_2), SET_LAW(PIXIS_BASE, LAW_SIZE_2M, LAW_TRGT_IF_LBC), - SET_LAW(CFG_PCIE1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_1), - SET_LAW(CFG_PCIE2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_2), - SET_LAW(CFG_FLASH_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC), - SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI_1), - SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_1) + SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_1), + SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_2), + SET_LAW(CONFIG_SYS_FLASH_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC), + SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI_1), + SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_1) }; int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd.c b/board/freescale/mpc8610hpcd/mpc8610hpcd.c index af79fc2c6..2792778e3 100644 --- a/board/freescale/mpc8610hpcd/mpc8610hpcd.c +++ b/board/freescale/mpc8610hpcd/mpc8610hpcd.c @@ -32,22 +32,19 @@ #include <libfdt.h> #include <fdt_support.h> #include <spd_sdram.h> +#include <netdev.h> #include "../common/pixis.h" -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) -extern void ddr_enable_ecc(unsigned int dram_size); -#endif - void sdram_init(void); -long int fixed_sdram(void); +phys_size_t fixed_sdram(void); void mpc8610hpcd_diu_init(void); /* called before any console output */ int board_early_init_f(void) { - volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; volatile ccsr_gur_t *gur = &immap->im_gur; gur->gpiocr |= 0x88aa5500; /* DIU16, IR1, UART0, UART2 */ @@ -97,7 +94,7 @@ int misc_init_r(void) int checkboard(void) { - volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; volatile ccsr_local_mcm_t *mcm = &immap->im_local_mcm; printf ("Board: MPC8610HPCD, System ID: 0x%02x, " @@ -120,7 +117,7 @@ int checkboard(void) phys_size_t initdram(int board_type) { - long dram_size = 0; + phys_size_t dram_size = 0; #if defined(CONFIG_SPD_EEPROM) dram_size = fsl_ddr_sdram(); @@ -128,18 +125,11 @@ initdram(int board_type) dram_size = fixed_sdram(); #endif -#if defined(CFG_RAMBOOT) +#if defined(CONFIG_SYS_RAMBOOT) puts(" DDR: "); return dram_size; #endif -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - /* - * Initialize and enable DDR ECC. - */ - ddr_enable_ecc(dram_size); -#endif - puts(" DDR: "); return dram_size; } @@ -150,10 +140,10 @@ initdram(int board_type) * Fixed sdram init -- doesn't use serial presence detect. */ -long int fixed_sdram(void) +phys_size_t fixed_sdram(void) { -#if !defined(CFG_RAMBOOT) - volatile immap_t *immap = (immap_t *)CFG_IMMR; +#if !defined(CONFIG_SYS_RAMBOOT) + volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; volatile ccsr_ddr_t *ddr = &immap->im_ddr1; uint d_init; @@ -200,7 +190,7 @@ long int fixed_sdram(void) return 512 * 1024 * 1024; #endif - return CFG_SDRAM_SIZE * 1024 * 1024; + return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; } #endif @@ -239,9 +229,12 @@ static struct pci_controller pcie2_hose; int first_free_busno = 0; +extern int fsl_pci_setup_inbound_windows(struct pci_region *r); +extern void fsl_pci_init(struct pci_controller *hose); + void pci_init_board(void) { - volatile immap_t *immap = (immap_t *) CFG_CCSRBAR; + volatile immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR; volatile ccsr_gur_t *gur = &immap->im_gur; uint devdisr = gur->devdisr; uint io_sel = (gur->pordevsr & MPC8610_PORDEVSR_IO_SEL) @@ -254,12 +247,12 @@ void pci_init_board(void) #ifdef CONFIG_PCIE1 { - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR; struct pci_controller *hose = &pcie1_hose; int pcie_configured = (io_sel == 1) || (io_sel == 4); int pcie_ep = (host_agent == 0) || (host_agent == 2) || (host_agent == 5); + struct pci_region *r = hose->regions; if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIE1)) { printf(" PCIe 1 connected to Uli as %s (base address %x)\n", @@ -269,27 +262,23 @@ void pci_init_board(void) pci->pme_msg_det = 0xffffffff; /* inbound */ - pci_set_region(hose->regions + 0, - CFG_PCI_MEMORY_BUS, - CFG_PCI_MEMORY_PHYS, - CFG_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, - CFG_PCIE1_MEM_BASE, - CFG_PCIE1_MEM_PHYS, - CFG_PCIE1_MEM_SIZE, + pci_set_region(r++, + CONFIG_SYS_PCIE1_MEM_BASE, + CONFIG_SYS_PCIE1_MEM_PHYS, + CONFIG_SYS_PCIE1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, - CFG_PCIE1_IO_BASE, - CFG_PCIE1_IO_PHYS, - CFG_PCIE1_IO_SIZE, + pci_set_region(r++, + CONFIG_SYS_PCIE1_IO_BASE, + CONFIG_SYS_PCIE1_IO_PHYS, + CONFIG_SYS_PCIE1_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; + hose->region_count = r - hose->regions; hose->first_busno = first_free_busno; pci_setup_indirect(hose, (int)&pci->cfg_addr, @@ -311,9 +300,9 @@ void pci_init_board(void) #ifdef CONFIG_PCIE2 { - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE2_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR; struct pci_controller *hose = &pcie2_hose; + struct pci_region *r = hose->regions; int pcie_configured = (io_sel == 0) || (io_sel == 4); int pcie_ep = (host_agent == 0) || (host_agent == 1) || @@ -328,27 +317,23 @@ void pci_init_board(void) pci->pme_msg_det = 0xffffffff; /* inbound */ - pci_set_region(hose->regions + 0, - CFG_PCI_MEMORY_BUS, - CFG_PCI_MEMORY_PHYS, - CFG_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, - CFG_PCIE2_MEM_BASE, - CFG_PCIE2_MEM_PHYS, - CFG_PCIE2_MEM_SIZE, + pci_set_region(r++, + CONFIG_SYS_PCIE2_MEM_BASE, + CONFIG_SYS_PCIE2_MEM_PHYS, + CONFIG_SYS_PCIE2_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, - CFG_PCIE2_IO_BASE, - CFG_PCIE2_IO_PHYS, - CFG_PCIE2_IO_SIZE, + pci_set_region(r++, + CONFIG_SYS_PCIE2_IO_BASE, + CONFIG_SYS_PCIE2_IO_PHYS, + CONFIG_SYS_PCIE2_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; + hose->region_count = r - hose->regions; hose->first_busno = first_free_busno; pci_setup_indirect(hose, (int)&pci->cfg_addr, @@ -369,10 +354,10 @@ void pci_init_board(void) #ifdef CONFIG_PCI1 { - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR; struct pci_controller *hose = &pci1_hose; int pci_agent = (host_agent >= 4) && (host_agent <= 6); + struct pci_region *r = hose->regions; if ( !(devdisr & MPC86xx_DEVDISR_PCI1)) { printf(" PCI connected to PCI slots as %s" \ @@ -381,27 +366,23 @@ void pci_init_board(void) (uint)pci); /* inbound */ - pci_set_region(hose->regions + 0, - CFG_PCI_MEMORY_BUS, - CFG_PCI_MEMORY_PHYS, - CFG_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, - CFG_PCI1_MEM_BASE, - CFG_PCI1_MEM_PHYS, - CFG_PCI1_MEM_SIZE, + pci_set_region(r++, + CONFIG_SYS_PCI1_MEM_BASE, + CONFIG_SYS_PCI1_MEM_PHYS, + CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, - CFG_PCI1_IO_BASE, - CFG_PCI1_IO_PHYS, - CFG_PCI1_IO_SIZE, + pci_set_region(r++, + CONFIG_SYS_PCI1_IO_BASE, + CONFIG_SYS_PCI1_IO_PHYS, + CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; + hose->region_count = r - hose->regions; hose->first_busno = first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, @@ -421,12 +402,12 @@ void pci_init_board(void) } #if defined(CONFIG_OF_BOARD_SETUP) +extern void ft_fsl_pci_setup(void *blob, const char *pci_alias, + struct pci_controller *hose); + void ft_board_setup(void *blob, bd_t *bd) { - int node, tmp[2]; - const char *path; - do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, "timebase-frequency", bd->bi_busfreq / 4, 1); do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, @@ -441,36 +422,15 @@ ft_board_setup(void *blob, bd_t *bd) fdt_fixup_memory(blob, bd->bi_memstart, bd->bi_memsize); - - node = fdt_path_offset(blob, "/aliases"); - tmp[0] = 0; - if (node >= 0) { - #ifdef CONFIG_PCI1 - path = fdt_getprop(blob, node, "pci0", NULL); - if (path) { - tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } - + ft_fsl_pci_setup(blob, "pci0", &pci1_hose); #endif #ifdef CONFIG_PCIE1 - path = fdt_getprop(blob, node, "pci1", NULL); - if (path) { - tmp[1] = pcie1_hose.last_busno - - pcie1_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + ft_fsl_pci_setup(blob, "pci1", &pcie1_hose); #endif #ifdef CONFIG_PCIE2 - path = fdt_getprop(blob, node, "pci2", NULL); - if (path) { - tmp[1] = pcie2_hose.last_busno - - pcie2_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + ft_fsl_pci_setup(blob, "pci2", &pcie2_hose); #endif - } } #endif @@ -520,12 +480,7 @@ get_board_sys_clk(ulong dummy) return val; } -extern int uli526x_initialize(bd_t *); - int board_eth_init(bd_t *bis) { -#if defined(CONFIG_ULI526) - uli526x_initialize(bis); -#endif - return 0; + return pci_eth_init(bis); } diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c b/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c index 4db941ced..cd25d4aa8 100644 --- a/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c +++ b/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c @@ -43,7 +43,7 @@ static int xres, yres; void diu_set_pixel_clock(unsigned int pixclock) { - volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; volatile ccsr_gur_t *gur = &immap->im_gur; volatile unsigned int *guts_clkdvdr = &gur->clkdvdr; unsigned long speed_ccb, temp, pixval; @@ -137,7 +137,7 @@ int mpc8610diu_init_show_bmp(cmd_tbl_t *cmdtp, } U_BOOT_CMD( - diufb, CFG_MAXARGS, 1, mpc8610diu_init_show_bmp, + diufb, CONFIG_SYS_MAXARGS, 1, mpc8610diu_init_show_bmp, "diufb init | addr - Init or Display BMP file\n", "init\n - initialize DIU\n" "addr\n - display bmp at address 'addr'\n" diff --git a/board/freescale/mpc8610hpcd/u-boot.lds b/board/freescale/mpc8610hpcd/u-boot.lds index b88138e19..41274923d 100644 --- a/board/freescale/mpc8610hpcd/u-boot.lds +++ b/board/freescale/mpc8610hpcd/u-boot.lds @@ -128,6 +128,7 @@ SECTIONS *(.dynbss) *(.bss) *(COMMON) + . = ALIGN(4); } _end = . ; PROVIDE (end = .); diff --git a/board/freescale/mpc8641hpcn/config.mk b/board/freescale/mpc8641hpcn/config.mk index f778dcbe0..487a76699 100644 --- a/board/freescale/mpc8641hpcn/config.mk +++ b/board/freescale/mpc8641hpcn/config.mk @@ -25,7 +25,7 @@ # default CCSRBAR is at 0xff700000 # assume U-Boot is less than 0.5MB # -TEXT_BASE = 0xfff00000 +TEXT_BASE = 0xeff00000 PLATFORM_CPPFLAGS += -DCONFIG_MPC86xx=1 PLATFORM_CPPFLAGS += -DCONFIG_MPC8641=1 -maltivec -mabi=altivec -msoft-float diff --git a/board/freescale/mpc8641hpcn/ddr.c b/board/freescale/mpc8641hpcn/ddr.c index 5163abf05..3789b5442 100644 --- a/board/freescale/mpc8641hpcn/ddr.c +++ b/board/freescale/mpc8641hpcn/ddr.c @@ -10,6 +10,7 @@ #include <i2c.h> #include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_ddr_dimm_params.h> static void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) @@ -45,44 +46,120 @@ void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, } } -void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num) +typedef struct { + u32 datarate_mhz_low; + u32 datarate_mhz_high; + u32 n_ranks; + u32 clk_adjust; + u32 cpo; + u32 write_data_delay; +} board_specific_parameters_t; + +/* XXX: these values need to be checked for all interleaving modes. */ +const board_specific_parameters_t board_specific_parameters[2][16] = { + { + /* memory controller 0 */ + /* lo| hi| num| clk| cpo|wrdata */ + /* mhz| mhz|ranks|adjst| | delay */ + { 0, 333, 4, 7, 7, 3}, + {334, 400, 4, 7, 9, 3}, + {401, 549, 4, 7, 9, 3}, + {550, 650, 4, 7, 10, 4}, + + { 0, 333, 3, 7, 7, 3}, + {334, 400, 3, 7, 9, 3}, + {401, 549, 3, 7, 9, 3}, + {550, 650, 3, 7, 10, 4}, + + { 0, 333, 2, 7, 7, 3}, + {334, 400, 2, 7, 9, 3}, + {401, 549, 2, 7, 9, 3}, + {550, 650, 2, 7, 10, 4}, + + { 0, 333, 1, 7, 7, 3}, + {334, 400, 1, 7, 9, 3}, + {401, 549, 1, 7, 9, 3}, + {550, 650, 1, 7, 10, 4} + }, + + { + /* memory controller 1 */ + /* lo| hi| num| clk| cpo|wrdata */ + /* mhz| mhz|ranks|adjst| | delay */ + { 0, 333, 4, 7, 7, 3}, + {334, 400, 4, 7, 9, 3}, + {401, 549, 4, 7, 9, 3}, + {550, 650, 4, 7, 10, 4}, + + { 0, 333, 3, 7, 7, 3}, + {334, 400, 3, 7, 9, 3}, + {401, 549, 3, 7, 9, 3}, + {550, 650, 3, 7, 10, 4}, + + { 0, 333, 2, 7, 7, 3}, + {334, 400, 2, 7, 9, 3}, + {401, 549, 2, 7, 9, 3}, + {550, 650, 2, 7, 10, 4}, + + { 0, 333, 1, 7, 7, 3}, + {334, 400, 1, 7, 9, 3}, + {401, 549, 1, 7, 9, 3}, + {550, 650, 1, 7, 10, 4} + } +}; + +void fsl_ddr_board_options(memctl_options_t *popts, + dimm_params_t *pdimm, + unsigned int ctrl_num) { - /* - * Factors to consider for clock adjust: - * - number of chips on bus - * - position of slot - * - DDR1 vs. DDR2? - * - ??? - * - * This needs to be determined on a board-by-board basis. - * 0110 3/4 cycle late - * 0111 7/8 cycle late - */ - popts->clk_adjust = 7; + const board_specific_parameters_t *pbsp = + &(board_specific_parameters[ctrl_num][0]); + u32 num_params = sizeof(board_specific_parameters[ctrl_num]) / + sizeof(board_specific_parameters[0][0]); + u32 i; + u32 j; + ulong ddr_freq; - /* - * Factors to consider for CPO: - * - frequency - * - ddr1 vs. ddr2 + /* set odt_rd_cfg and odt_wr_cfg. If the there is only one dimm in + * that controller, set odt_wr_cfg to 4 for CS0, and 0 to CS1. If + * there are two dimms in the controller, set odt_rd_cfg to 3 and + * odt_wr_cfg to 3 for the even CS, 0 for the odd CS. */ - popts->cpo_override = 10; - - /* - * Factors to consider for write data delay: - * - number of DIMMs - * - * 1 = 1/4 clock delay - * 2 = 1/2 clock delay - * 3 = 3/4 clock delay - * 4 = 1 clock delay - * 5 = 5/4 clock delay - * 6 = 3/2 clock delay - */ - popts->write_data_delay = 3; + for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { + if (i&1) { /* odd CS */ + popts->cs_local_opts[i].odt_rd_cfg = 0; + popts->cs_local_opts[i].odt_wr_cfg = 0; + } else { /* even CS */ + if ((CONFIG_DIMM_SLOTS_PER_CTLR == 2) && + (pdimm[i/2].n_ranks != 0)) { + popts->cs_local_opts[i].odt_rd_cfg = 3; + popts->cs_local_opts[i].odt_wr_cfg = 3; + } else { + popts->cs_local_opts[i].odt_rd_cfg = 0; + popts->cs_local_opts[i].odt_wr_cfg = 4; + } + } + } - /* - * Factors to consider for half-strength driver enable: - * - number of DIMMs installed + /* Get clk_adjust, cpo, write_data_delay, according to the board ddr + * freqency and n_banks specified in board_specific_parameters table. */ - popts->half_strength_driver_enable = 0; + ddr_freq = fsl_ddr_get_mem_data_rate() / 1000000; + for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) { + if (pdimm[j].n_ranks > 0) { + for (i = 0; i < num_params; i++) { + if (ddr_freq >= pbsp->datarate_mhz_low && + ddr_freq <= pbsp->datarate_mhz_high && + pdimm[j].n_ranks == pbsp->n_ranks) { + popts->clk_adjust = pbsp->clk_adjust; + popts->cpo_override = pbsp->cpo; + popts->write_data_delay = + pbsp->write_data_delay; + break; + } + pbsp++; + } + } + } + } diff --git a/board/freescale/mpc8641hpcn/law.c b/board/freescale/mpc8641hpcn/law.c index 2d6c3c175..bd357b866 100644 --- a/board/freescale/mpc8641hpcn/law.c +++ b/board/freescale/mpc8641hpcn/law.c @@ -31,34 +31,38 @@ * LAW(Local Access Window) configuration: * * 0x0000_0000 0x7fff_ffff DDR 2G + * if PCI (prepend 0xc_0000_0000 if CONFIG_PHYS_64BIT) * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M * 0xa000_0000 0xbfff_ffff PCI2 MEM 512M - * 0xc000_0000 0xdfff_ffff RapidIO 512M - * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M - * 0xe300_0000 0xe3ff_ffff PCI2 IO 16M - * 0xf800_0000 0xf80f_ffff CCSRBAR 1M - * 0xf810_0000 0xf81f_ffff PIXIS 1M - * 0xfe00_0000 0xffff_ffff FLASH (boot bank) 32M + * else if RIO (prepend 0xc_0000_0000 if CONFIG_PHYS_64BIT) + * 0x8000_0000 0x9fff_ffff RapidIO 512M + * endif + * (prepend 0xf_0000_0000 if CONFIG_PHYS_64BIT) + * 0xffc0_0000 0xffc0_ffff PCI1 IO 64K + * 0xffc1_0000 0xffc1_ffff PCI2 IO 64K + * 0xffe0_0000 0xffef_ffff CCSRBAR 1M + * 0xffdf_0000 0xffe0_0000 PIXIS, CF 64K + * 0xef80_0000 0xefff_ffff FLASH (boot bank) 8M * * Notes: - * CCSRBAR don't need a configured Local Access Window. + * CCSRBAR doesn't need a configured Local Access Window. * If flash is 8M at default position (last 8M), no LAW needed. */ struct law_entry law_table[] = { #if !defined(CONFIG_SPD_EEPROM) - SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_1), + SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_1), #endif - SET_LAW(CFG_PCI1_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1), - SET_LAW(CFG_PCI2_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2), - SET_LAW(PIXIS_BASE, LAW_SIZE_2M, LAW_TRGT_IF_LBC), - SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1), - SET_LAW(CFG_PCI2_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2), - SET_LAW((CFG_FLASH_BASE & 0xfe000000), LAW_SIZE_32M, LAW_TRGT_IF_LBC), -#if !defined(CONFIG_SPD_EEPROM) - SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_2), +#ifdef CONFIG_PCI + SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1), + SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2), + SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI_1), + SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI_2), +#elif defined(CONFIG_RIO) + SET_LAW(CONFIG_SYS_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO), #endif - SET_LAW(CFG_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO) + SET_LAW(PIXIS_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_LBC), + SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_LBC), }; int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/mpc8641hpcn/mpc8641hpcn.c b/board/freescale/mpc8641hpcn/mpc8641hpcn.c index 1bb563e41..b83ed6c45 100644 --- a/board/freescale/mpc8641hpcn/mpc8641hpcn.c +++ b/board/freescale/mpc8641hpcn/mpc8641hpcn.c @@ -29,14 +29,11 @@ #include <asm/io.h> #include <libfdt.h> #include <fdt_support.h> +#include <netdev.h> #include "../common/pixis.h" -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) -extern void ddr_enable_ecc(unsigned int dram_size); -#endif - -long int fixed_sdram(void); +phys_size_t fixed_sdram(void); int board_early_init_f(void) { @@ -56,7 +53,7 @@ int checkboard(void) phys_size_t initdram(int board_type) { - long dram_size = 0; + phys_size_t dram_size = 0; #if defined(CONFIG_SPD_EEPROM) dram_size = fsl_ddr_sdram(); @@ -64,18 +61,11 @@ initdram(int board_type) dram_size = fixed_sdram(); #endif -#if defined(CFG_RAMBOOT) +#if defined(CONFIG_SYS_RAMBOOT) puts(" DDR: "); return dram_size; #endif -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - /* - * Initialize and enable DDR ECC. - */ - ddr_enable_ecc(dram_size); -#endif - puts(" DDR: "); return dram_size; } @@ -85,26 +75,26 @@ initdram(int board_type) /* * Fixed sdram init -- doesn't use serial presence detect. */ -long int +phys_size_t fixed_sdram(void) { -#if !defined(CFG_RAMBOOT) - volatile immap_t *immap = (immap_t *) CFG_IMMR; +#if !defined(CONFIG_SYS_RAMBOOT) + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile ccsr_ddr_t *ddr = &immap->im_ddr1; - ddr->cs0_bnds = CFG_DDR_CS0_BNDS; - ddr->cs0_config = CFG_DDR_CS0_CONFIG; - ddr->timing_cfg_3 = CFG_DDR_TIMING_3; - ddr->timing_cfg_0 = CFG_DDR_TIMING_0; - ddr->timing_cfg_1 = CFG_DDR_TIMING_1; - ddr->timing_cfg_2 = CFG_DDR_TIMING_2; - ddr->sdram_mode_1 = CFG_DDR_MODE_1; - ddr->sdram_mode_2 = CFG_DDR_MODE_2; - ddr->sdram_interval = CFG_DDR_INTERVAL; - ddr->sdram_data_init = CFG_DDR_DATA_INIT; - ddr->sdram_clk_cntl = CFG_DDR_CLK_CTRL; - ddr->sdram_ocd_cntl = CFG_DDR_OCD_CTRL; - ddr->sdram_ocd_status = CFG_DDR_OCD_STATUS; + ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS; + ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG; + ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3; + ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0; + ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; + ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; + ddr->sdram_mode_1 = CONFIG_SYS_DDR_MODE_1; + ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2; + ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL; + ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT; + ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL; + ddr->sdram_ocd_cntl = CONFIG_SYS_DDR_OCD_CTRL; + ddr->sdram_ocd_status = CONFIG_SYS_DDR_OCD_STATUS; #if defined (CONFIG_DDR_ECC) ddr->err_disable = 0x0000008D; @@ -116,42 +106,22 @@ fixed_sdram(void) #if defined (CONFIG_DDR_ECC) /* Enable ECC checking */ - ddr->sdram_cfg_1 = (CFG_DDR_CONTROL | 0x20000000); + ddr->sdram_cfg_1 = (CONFIG_SYS_DDR_CONTROL | 0x20000000); #else - ddr->sdram_cfg_1 = CFG_DDR_CONTROL; - ddr->sdram_cfg_2 = CFG_DDR_CONTROL2; + ddr->sdram_cfg_1 = CONFIG_SYS_DDR_CONTROL; + ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL2; #endif asm("sync; isync"); udelay(500); #endif - return CFG_SDRAM_SIZE * 1024 * 1024; + return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; } #endif /* !defined(CONFIG_SPD_EEPROM) */ #if defined(CONFIG_PCI) -/* - * Initialize PCI Devices, report devices found. - */ - -#ifndef CONFIG_PCI_PNP -static struct pci_config_table pci_fsl86xxads_config_table[] = { - {PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, - PCI_IDSEL_NUMBER, PCI_ANY_ID, - pci_cfgfunc_config_device, {PCI_ENET0_IOADDR, - PCI_ENET0_MEMADDR, - PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER}}, - {} -}; -#endif - - -static struct pci_controller pci1_hose = { -#ifndef CONFIG_PCI_PNP - config_table:pci_mpc86xxcts_config_table -#endif -}; +static struct pci_controller pci1_hose; #endif /* CONFIG_PCI */ #ifdef CONFIG_PCI2 @@ -160,20 +130,22 @@ static struct pci_controller pci2_hose; int first_free_busno = 0; +extern int fsl_pci_setup_inbound_windows(struct pci_region *r); +extern void fsl_pci_init(struct pci_controller *hose); void pci_init_board(void) { - volatile immap_t *immap = (immap_t *) CFG_CCSRBAR; +#ifdef CONFIG_PCI1 +{ + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR; + struct pci_controller *hose = &pci1_hose; + struct pci_region *r = hose->regions; + volatile immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR; volatile ccsr_gur_t *gur = &immap->im_gur; uint devdisr = gur->devdisr; uint io_sel = (gur->pordevsr & MPC8641_PORDEVSR_IO_SEL) >> MPC8641_PORDEVSR_IO_SEL_SHIFT; -#ifdef CONFIG_PCI1 -{ - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); - struct pci_controller *hose = &pci1_hose; #ifdef DEBUG uint host1_agent = (gur->porbmsr & MPC8641_PORBMSR_HA) >> MPC8641_PORBMSR_HA_SHIFT; @@ -192,27 +164,23 @@ void pci_init_board(void) debug("\n"); /* inbound */ - pci_set_region(hose->regions + 0, - CFG_PCI_MEMORY_BUS, - CFG_PCI_MEMORY_PHYS, - CFG_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, - CFG_PCI1_MEM_BASE, - CFG_PCI1_MEM_PHYS, - CFG_PCI1_MEM_SIZE, + pci_set_region(r++, + CONFIG_SYS_PCI1_MEM_BASE, + CONFIG_SYS_PCI1_MEM_PHYS, + CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, - CFG_PCI1_IO_BASE, - CFG_PCI1_IO_PHYS, - CFG_PCI1_IO_SIZE, + pci_set_region(r++, + CONFIG_SYS_PCI1_IO_BASE, + CONFIG_SYS_PCI1_IO_PHYS, + CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; + hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); @@ -227,8 +195,8 @@ void pci_init_board(void) * Activate ULI1575 legacy chip by performing a fake * memory access. Needed to make ULI RTC work. */ - in_be32((unsigned *) ((char *)(CFG_PCI1_MEM_BASE - + CFG_PCI1_MEM_SIZE - 0x1000000))); + in_be32((unsigned *) ((char *)(CONFIG_SYS_PCI1_MEM_BASE + + CONFIG_SYS_PCI1_MEM_SIZE - 0x1000000))); } else { puts("PCI-EXPRESS 1: Disabled\n"); @@ -240,33 +208,28 @@ void pci_init_board(void) #ifdef CONFIG_PCI2 { - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI2_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI2_ADDR; struct pci_controller *hose = &pci2_hose; - + struct pci_region *r = hose->regions; /* inbound */ - pci_set_region(hose->regions + 0, - CFG_PCI_MEMORY_BUS, - CFG_PCI_MEMORY_PHYS, - CFG_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, - CFG_PCI2_MEM_BASE, - CFG_PCI2_MEM_PHYS, - CFG_PCI2_MEM_SIZE, + pci_set_region(r++, + CONFIG_SYS_PCI2_MEM_BASE, + CONFIG_SYS_PCI2_MEM_PHYS, + CONFIG_SYS_PCI2_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, - CFG_PCI2_IO_BASE, - CFG_PCI2_IO_PHYS, - CFG_PCI2_IO_SIZE, + pci_set_region(r++, + CONFIG_SYS_PCI2_IO_BASE, + CONFIG_SYS_PCI2_IO_PHYS, + CONFIG_SYS_PCI2_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; + hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); @@ -285,32 +248,46 @@ void pci_init_board(void) #if defined(CONFIG_OF_BOARD_SETUP) +extern void ft_fsl_pci_setup(void *blob, const char *pci_alias, + struct pci_controller *hose); void ft_board_setup(void *blob, bd_t *bd) { - int node, tmp[2]; - const char *path; + int off; + u64 *tmp; + u32 *addrcells; ft_cpu_setup(blob, bd); - node = fdt_path_offset(blob, "/aliases"); - tmp[0] = 0; - if (node >= 0) { #ifdef CONFIG_PCI1 - path = fdt_getprop(blob, node, "pci0", NULL); - if (path) { - tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + ft_fsl_pci_setup(blob, "pci0", &pci1_hose); #endif #ifdef CONFIG_PCI2 - path = fdt_getprop(blob, node, "pci1", NULL); - if (path) { - tmp[1] = pci2_hose.last_busno - pci2_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + ft_fsl_pci_setup(blob, "pci1", &pci2_hose); #endif + + /* + * Warn if it looks like the device tree doesn't match u-boot. + * This is just an estimation, based on the location of CCSR, + * which is defined by the "reg" property in the soc node. + */ + off = fdt_path_offset(blob, "/soc8641"); + addrcells = (u32 *)fdt_getprop(blob, 0, "#address-cells", NULL); + tmp = (u64 *)fdt_getprop(blob, off, "reg", NULL); + + if (tmp) { + u64 addr; + if (addrcells && (*addrcells == 1)) + addr = *(u32 *)tmp; + else + addr = *tmp; + + if (addr != CONFIG_SYS_CCSRBAR_PHYS) + printf("WARNING: The CCSRBAR address in your .dts " + "does not match the address of the CCSR " + "in u-boot. This means your .dts might " + "be old.\n"); } } #endif @@ -379,3 +356,10 @@ get_board_sys_clk(ulong dummy) return val; } + +int board_eth_init(bd_t *bis) +{ + /* Initialize TSECs */ + cpu_eth_init(bis); + return pci_eth_init(bis); +} diff --git a/board/freescale/mpc8641hpcn/u-boot.lds b/board/freescale/mpc8641hpcn/u-boot.lds index 4f884f987..6c9da1f32 100644 --- a/board/freescale/mpc8641hpcn/u-boot.lds +++ b/board/freescale/mpc8641hpcn/u-boot.lds @@ -129,6 +129,7 @@ SECTIONS *(.dynbss) *(.bss) *(COMMON) + . = ALIGN(4); } _end = . ; PROVIDE (end = .); diff --git a/board/freescale/mx31ads/u-boot.lds b/board/freescale/mx31ads/u-boot.lds index c379460c9..e682f307f 100644 --- a/board/freescale/mx31ads/u-boot.lds +++ b/board/freescale/mx31ads/u-boot.lds @@ -44,7 +44,7 @@ SECTIONS drivers/mtd/libmtd.a (.text) . = DEFINED(env_offset) ? env_offset : .; - common/environment.o(.text) + common/env_embedded.o(.text) *(.text) } @@ -65,6 +65,6 @@ SECTIONS . = ALIGN(4); __bss_start = .; - .bss : { *(.bss) } + .bss : { *(.bss) . = ALIGN(4); } _end = .; } |