summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
Diffstat (limited to 'board')
-rw-r--r--board/mpl/vcma9/vcma9.c13
-rw-r--r--board/mpl/vcma9/vcma9.h20
-rw-r--r--board/samsung/smdk2400/smdk2400.c5
-rw-r--r--board/samsung/smdk2410/smdk2410.c5
-rw-r--r--board/sbc2410x/sbc2410x.c7
-rw-r--r--board/trab/cmd_trab.c12
-rw-r--r--board/trab/rs485.c12
-rw-r--r--board/trab/trab.c17
-rw-r--r--board/trab/trab_fkt.c26
-rw-r--r--board/trab/tsc2000.c17
-rw-r--r--board/trab/tsc2000.h4
-rw-r--r--board/trab/vfd.c12
12 files changed, 78 insertions, 72 deletions
diff --git a/board/mpl/vcma9/vcma9.c b/board/mpl/vcma9/vcma9.c
index 2b64f4487..4d8b579ca 100644
--- a/board/mpl/vcma9/vcma9.c
+++ b/board/mpl/vcma9/vcma9.c
@@ -73,8 +73,9 @@ static inline void delay(unsigned long loops)
int board_init(void)
{
- S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+ struct s3c24x0_clock_power * const clk_power =
+ s3c24x0_get_base_clock_power();
+ struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
/* to reduce PLL lock time, adjust the LOCKTIME register */
clk_power->LOCKTIME = 0xFFFFFF;
@@ -174,7 +175,7 @@ static inline void NF_Init(void)
void
nand_init(void)
{
- S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+ struct s3c2410_nand * const nand = s3c2410_get_base_nand();
NF_Init();
#ifdef DEBUG
@@ -190,21 +191,21 @@ nand_init(void)
static u8 Get_PLD_ID(void)
{
- VCMA9_PLD * const pld = VCMA9_GetBase_PLD();
+ VCMA9_PLD * const pld = VCMA9_get_base_PLD();
return(pld->ID);
}
static u8 Get_PLD_BOARD(void)
{
- VCMA9_PLD * const pld = VCMA9_GetBase_PLD();
+ VCMA9_PLD * const pld = VCMA9_get_base_PLD();
return(pld->BOARD);
}
static u8 Get_PLD_SDRAM(void)
{
- VCMA9_PLD * const pld = VCMA9_GetBase_PLD();
+ VCMA9_PLD * const pld = VCMA9_get_base_PLD();
return(pld->SDRAM);
}
diff --git a/board/mpl/vcma9/vcma9.h b/board/mpl/vcma9/vcma9.h
index 220b7053b..f46e0e4c5 100644
--- a/board/mpl/vcma9/vcma9.h
+++ b/board/mpl/vcma9/vcma9.h
@@ -39,14 +39,14 @@ typedef enum {
static inline void NF_Conf(u16 conf)
{
- S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+ struct s3c2410_nand * const nand = s3c2410_get_base_nand();
nand->NFCONF = conf;
}
static inline void NF_Cmd(u8 cmd)
{
- S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+ struct s3c2410_nand * const nand = s3c2410_get_base_nand();
nand->NFCMD = cmd;
}
@@ -59,14 +59,14 @@ static inline void NF_CmdW(u8 cmd)
static inline void NF_Addr(u8 addr)
{
- S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+ struct s3c2410_nand * const nand = s3c2410_get_base_nand();
nand->NFADDR = addr;
}
static inline void NF_SetCE(NFCE_STATE s)
{
- S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+ struct s3c2410_nand * const nand = s3c2410_get_base_nand();
switch (s) {
case NFCE_LOW:
@@ -81,35 +81,35 @@ static inline void NF_SetCE(NFCE_STATE s)
static inline void NF_WaitRB(void)
{
- S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+ struct s3c2410_nand * const nand = s3c2410_get_base_nand();
while (!(nand->NFSTAT & (1<<0)));
}
static inline void NF_Write(u8 data)
{
- S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+ struct s3c2410_nand * const nand = s3c2410_get_base_nand();
nand->NFDATA = data;
}
static inline u8 NF_Read(void)
{
- S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+ struct s3c2410_nand * const nand = s3c2410_get_base_nand();
return(nand->NFDATA);
}
static inline void NF_Init_ECC(void)
{
- S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+ struct s3c2410_nand * const nand = s3c2410_get_base_nand();
nand->NFCONF |= (1<<12);
}
static inline u32 NF_Read_ECC(void)
{
- S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+ struct s3c2410_nand * const nand = s3c2410_get_base_nand();
return(nand->NFECC);
}
@@ -128,7 +128,7 @@ typedef struct {
} /*__attribute__((__packed__))*/ VCMA9_PLD;
#define VCMA9_PLD_BASE 0x2C000100
-static inline VCMA9_PLD * VCMA9_GetBase_PLD(void)
+static inline VCMA9_PLD *VCMA9_get_base_PLD(void)
{
return (VCMA9_PLD * const)VCMA9_PLD_BASE;
}
diff --git a/board/samsung/smdk2400/smdk2400.c b/board/samsung/smdk2400/smdk2400.c
index 2c47063e9..42bf00868 100644
--- a/board/samsung/smdk2400/smdk2400.c
+++ b/board/samsung/smdk2400/smdk2400.c
@@ -46,8 +46,9 @@ extern int do_mdm_init; /* defined in common/main.c */
int board_init (void)
{
- S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+ struct s3c24x0_clock_power * const clk_power =
+ s3c24x0_get_base_clock_power();
+ struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
/* memory and cpu-speed are setup before relocation */
/* change the clock to be 50 MHz 1:1:1 */
diff --git a/board/samsung/smdk2410/smdk2410.c b/board/samsung/smdk2410/smdk2410.c
index 25c38e67e..fde773093 100644
--- a/board/samsung/smdk2410/smdk2410.c
+++ b/board/samsung/smdk2410/smdk2410.c
@@ -68,8 +68,9 @@ static inline void delay (unsigned long loops)
int board_init (void)
{
- S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+ struct s3c24x0_clock_power * const clk_power =
+ s3c24x0_get_base_clock_power();
+ struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
/* to reduce PLL lock time, adjust the LOCKTIME register */
clk_power->LOCKTIME = 0xFFFFFF;
diff --git a/board/sbc2410x/sbc2410x.c b/board/sbc2410x/sbc2410x.c
index 62768503a..7452c1f94 100644
--- a/board/sbc2410x/sbc2410x.c
+++ b/board/sbc2410x/sbc2410x.c
@@ -75,8 +75,9 @@ static inline void delay (unsigned long loops)
int board_init (void)
{
- S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+ struct s3c24x0_clock_power * const clk_power =
+ s3c24x0_get_base_clock_power();
+ struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
/* to reduce PLL lock time, adjust the LOCKTIME register */
clk_power->LOCKTIME = 0xFFFFFF;
@@ -170,7 +171,7 @@ static inline void NF_Init(void)
void nand_init(void)
{
- S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+ struct s3c2410_nand * const nand = s3c2410_get_base_nand();
NF_Init();
#ifdef DEBUG
diff --git a/board/trab/cmd_trab.c b/board/trab/cmd_trab.c
index ae6f7c6af..04a36075b 100644
--- a/board/trab/cmd_trab.c
+++ b/board/trab/cmd_trab.c
@@ -644,9 +644,9 @@ static int adc_read (unsigned int channel)
{
int j = 1000; /* timeout value for wait loop in us */
int result;
- S3C2400_ADC *padc;
+ struct s3c2400_adc *padc;
- padc = S3C2400_GetBase_ADC();
+ padc = s3c2400_get_base_adc();
channel &= 0x7;
adc_init ();
@@ -686,9 +686,9 @@ static int adc_read (unsigned int channel)
static void adc_init (void)
{
- S3C2400_ADC *padc;
+ struct s3c2400_adc *padc;
- padc = S3C2400_GetBase_ADC();
+ padc = s3c2400_get_base_adc();
padc->ADCCON &= ~(0xff << 6); /* clear prescaler bits */
padc->ADCCON |= ((65 << 6) | ADC_PRSCEN); /* set prescaler */
@@ -707,7 +707,7 @@ static void adc_init (void)
static void led_set (unsigned int state)
{
- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+ struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
led_init ();
@@ -740,7 +740,7 @@ static void led_blink (void)
static void led_init (void)
{
- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+ struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
/* configure GPA12 as output and set to High -> LED off */
gpio->PACON &= ~(1 << 12);
diff --git a/board/trab/rs485.c b/board/trab/rs485.c
index 97aea91c8..7d5c0a2c9 100644
--- a/board/trab/rs485.c
+++ b/board/trab/rs485.c
@@ -42,7 +42,7 @@ static void trab_rs485_disable_rx(void);
static void rs485_setbrg (void)
{
- S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
+ struct s3c24x0_uart * const uart = s3c24x0_get_base_uart(UART_NR);
int i;
unsigned int reg = 0;
@@ -67,7 +67,7 @@ static void rs485_setbrg (void)
static void rs485_cfgio (void)
{
- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+ struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
gpio->PFCON &= ~(0x3 << 2);
gpio->PFCON |= (0x2 << 2); /* configure GPF1 as RXD1 */
@@ -101,7 +101,7 @@ int rs485_init (void)
*/
int rs485_getc (void)
{
- S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
+ struct s3c24x0_uart * const uart = s3c24x0_get_base_uart(UART_NR);
/* wait for character to arrive */
while (!(uart->UTRSTAT & 0x1));
@@ -114,7 +114,7 @@ int rs485_getc (void)
*/
void rs485_putc (const char c)
{
- S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
+ struct s3c24x0_uart * const uart = s3c24x0_get_base_uart(UART_NR);
/* wait for room in the tx FIFO */
while (!(uart->UTRSTAT & 0x2));
@@ -131,7 +131,7 @@ void rs485_putc (const char c)
*/
int rs485_tstc (void)
{
- S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
+ struct s3c24x0_uart * const uart = s3c24x0_get_base_uart(UART_NR);
return uart->UTRSTAT & 0x1;
}
@@ -168,7 +168,7 @@ static void set_rs485re(unsigned char rs485re_state)
static void set_rs485de(unsigned char rs485de_state)
{
- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+ struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
/* This is on PORT A bit 11 */
if(rs485de_state)
diff --git a/board/trab/trab.c b/board/trab/trab.c
index 2dccd8767..ea782a913 100644
--- a/board/trab/trab.c
+++ b/board/trab/trab.c
@@ -69,8 +69,9 @@ int board_init ()
#if defined(CONFIG_VFD)
extern int vfd_init_clocks(void);
#endif
- S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+ struct s3c24x0_clock_power * const clk_power =
+ s3c24x0_get_base_clock_power();
+ struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
/* memory and cpu-speed are setup before relocation */
#ifdef CONFIG_TRAB_50MHZ
@@ -338,22 +339,22 @@ static int key_pressed(void)
static inline void SET_CS_TOUCH(void)
{
- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+ struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
gpio->PDDAT &= 0x5FF;
}
static inline void CLR_CS_TOUCH(void)
{
- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+ struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
gpio->PDDAT |= 0x200;
}
static void spi_init(void)
{
- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
- S3C24X0_SPI * const spi = S3C24X0_GetBase_SPI();
+ struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
+ struct s3c24x0_spi * const spi = s3c24x0_get_base_spi();
int i;
/* Configure I/O ports. */
@@ -377,7 +378,7 @@ static void spi_init(void)
static void wait_transmit_done(void)
{
- S3C24X0_SPI * const spi = S3C24X0_GetBase_SPI();
+ struct s3c24x0_spi * const spi = s3c24x0_get_base_spi();
while (!(spi->ch[0].SPSTA & 0x01)); /* wait until transfer is done */
}
@@ -385,7 +386,7 @@ static void wait_transmit_done(void)
static void tsc2000_write(unsigned int page, unsigned int reg,
unsigned int data)
{
- S3C24X0_SPI * const spi = S3C24X0_GetBase_SPI();
+ struct s3c24x0_spi * const spi = s3c24x0_get_base_spi();
unsigned int command;
SET_CS_TOUCH();
diff --git a/board/trab/trab_fkt.c b/board/trab/trab_fkt.c
index 74cdbfcbf..dc2a8d775 100644
--- a/board/trab/trab_fkt.c
+++ b/board/trab/trab_fkt.c
@@ -406,9 +406,9 @@ static int adc_read (unsigned int channel)
{
int j = 1000; /* timeout value for wait loop in us */
int result;
- S3C2400_ADC *padc;
+ struct s3c2400_adc *padc;
- padc = S3C2400_GetBase_ADC();
+ padc = s3c2400_get_base_adc();
channel &= 0x7;
padc->ADCCON &= ~ADC_STDBM; /* select normal mode */
@@ -446,9 +446,9 @@ static int adc_read (unsigned int channel)
static void adc_init (void)
{
- S3C2400_ADC *padc;
+ struct s3c2400_adc *padc;
- padc = S3C2400_GetBase_ADC();
+ padc = s3c2400_get_base_adc();
padc->ADCCON &= ~(0xff << 6); /* clear prescaler bits */
padc->ADCCON |= ((65 << 6) | ADC_PRSCEN); /* set prescaler */
@@ -490,7 +490,7 @@ int do_power_switch (void)
{
int result;
- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+ struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
/* configure GPE7 as input */
gpio->PECON &= ~(0x3 << (2 * 7));
@@ -557,7 +557,7 @@ int do_vfd_id (void)
int i;
long int pcup_old, pccon_old;
int vfd_board_id;
- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+ struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
/* try to red vfd board id from the value defined by pull-ups */
@@ -589,8 +589,8 @@ int do_buzzer (char **argv)
{
int counter;
- S3C24X0_TIMERS * const timers = S3C24X0_GetBase_TIMERS();
- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+ struct s3c24x0_timers * const timers = s3c24x0_get_base_timers();
+ struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
/* set prescaler for timer 2, 3 and 4 */
timers->TCFG0 &= ~0xFF00;
@@ -637,7 +637,7 @@ int do_buzzer (char **argv)
int do_led (char **argv)
{
- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+ struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
/* configure PC14 and PC15 as output */
gpio->PCCON &= ~(0xF << 28);
@@ -692,7 +692,7 @@ int do_led (char **argv)
int do_full_bridge (char **argv)
{
- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+ struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
/* configure PD5 and PD6 as output */
gpio->PDCON &= ~((0x3 << 5*2) | (0x3 << 6*2));
@@ -801,7 +801,7 @@ int do_motor_contact (void)
int do_motor (char **argv)
{
- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+ struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
/* Configure I/O port */
gpio->PGCON &= ~(0x3 << 0);
@@ -827,8 +827,8 @@ static void print_identifier (void)
int do_pwm (char **argv)
{
int counter;
- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
- S3C24X0_TIMERS * const timers = S3C24X0_GetBase_TIMERS();
+ struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
+ struct s3c24x0_timers * const timers = s3c24x0_get_base_timers();
if (strcmp (argv[2], "on") == 0) {
/* configure pin GPD8 as TOUT3 */
diff --git a/board/trab/tsc2000.c b/board/trab/tsc2000.c
index 986b6fb07..fc501a8a4 100644
--- a/board/trab/tsc2000.c
+++ b/board/trab/tsc2000.c
@@ -27,6 +27,7 @@
#include <common.h>
#include <s3c2400.h>
+#include <asm/io.h>
#include <div64.h>
#include "tsc2000.h"
@@ -44,8 +45,8 @@
void tsc2000_spi_init(void)
{
- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
- S3C24X0_SPI * const spi = S3C24X0_GetBase_SPI();
+ struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
+ struct s3c24x0_spi * const spi = s3c24x0_get_base_spi();
int i;
/* Configure I/O ports. */
@@ -71,7 +72,7 @@ void tsc2000_spi_init(void)
void spi_wait_transmit_done(void)
{
- S3C24X0_SPI * const spi = S3C24X0_GetBase_SPI();
+ struct s3c24x0_spi * const spi = s3c24x0_get_base_spi();
while (!(spi->ch[0].SPSTA & 0x01)); /* wait until transfer is done */
}
@@ -79,7 +80,7 @@ void spi_wait_transmit_done(void)
void tsc2000_write(unsigned short reg, unsigned short data)
{
- S3C24X0_SPI * const spi = S3C24X0_GetBase_SPI();
+ struct s3c24x0_spi * const spi = s3c24x0_get_base_spi();
unsigned int command;
SET_CS_TOUCH();
@@ -100,7 +101,7 @@ void tsc2000_write(unsigned short reg, unsigned short data)
unsigned short tsc2000_read (unsigned short reg)
{
unsigned short command, data;
- S3C24X0_SPI * const spi = S3C24X0_GetBase_SPI();
+ struct s3c24x0_spi * const spi = s3c24x0_get_base_spi();
SET_CS_TOUCH();
command = 0x8000 | reg;
@@ -123,7 +124,7 @@ unsigned short tsc2000_read (unsigned short reg)
void tsc2000_set_mux (unsigned int channel)
{
- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+ struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
CLR_MUX1_ENABLE; CLR_MUX2_ENABLE;
CLR_MUX3_ENABLE; CLR_MUX4_ENABLE;
@@ -200,7 +201,7 @@ void tsc2000_set_mux (unsigned int channel)
void tsc2000_set_range (unsigned int range)
{
- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+ struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
switch (range) {
case 1:
@@ -306,7 +307,7 @@ s32 tsc2000_contact_temp (void)
void tsc2000_reg_init (void)
{
- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+ struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
tsc2000_write(TSC2000_REG_ADC, 0x2036);
tsc2000_write(TSC2000_REG_REF, 0x0011);
diff --git a/board/trab/tsc2000.h b/board/trab/tsc2000.h
index 50c09c295..0b6253f65 100644
--- a/board/trab/tsc2000.h
+++ b/board/trab/tsc2000.h
@@ -128,7 +128,7 @@ void adc_wait_conversion_done(void);
static inline void SET_CS_TOUCH(void)
{
- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+ struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
gpio->PDDAT &= 0x5FF;
}
@@ -136,7 +136,7 @@ static inline void SET_CS_TOUCH(void)
static inline void CLR_CS_TOUCH(void)
{
- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+ struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
gpio->PDDAT |= 0x200;
}
diff --git a/board/trab/vfd.c b/board/trab/vfd.c
index e5ca4abe4..d5ad5bbdf 100644
--- a/board/trab/vfd.c
+++ b/board/trab/vfd.c
@@ -358,9 +358,9 @@ int vfd_init_clocks (void)
{
int i;
- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
- S3C24X0_TIMERS * const timers = S3C24X0_GetBase_TIMERS();
- S3C24X0_LCD * const lcd = S3C24X0_GetBase_LCD();
+ struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
+ struct s3c24x0_timers * const timers = s3c24x0_get_base_timers();
+ struct s3c24x0_lcd * const lcd = s3c24x0_get_base_lcd();
/* try to determine display type from the value
* defined by pull-ups
@@ -429,8 +429,8 @@ int vfd_init_clocks (void)
*/
int drv_vfd_init(void)
{
- S3C24X0_LCD * const lcd = S3C24X0_GetBase_LCD();
- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+ struct s3c24x0_lcd * const lcd = s3c24x0_get_base_lcd();
+ struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
char *tmp;
ulong palette;
static int vfd_init_done = 0;
@@ -529,7 +529,7 @@ int drv_vfd_init(void)
*/
void disable_vfd (void)
{
- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+ struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
VFD_DISABLE;
gpio->PDCON &= ~0xC;
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-12 00:03:51 +0000