diff options
Diffstat (limited to 'Makefile')
| -rw-r--r-- | Makefile | 336 |
1 files changed, 255 insertions, 81 deletions
@@ -21,11 +21,16 @@ # MA 02111-1307 USA # -VERSION = 1 -PATCHLEVEL = 3 -SUBLEVEL = 4 -EXTRAVERSION = +VERSION = 2009 +PATCHLEVEL = 01 +SUBLEVEL = +EXTRAVERSION = -rc1 +ifneq "$(SUBLEVEL)" "" U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) +else +U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL)$(EXTRAVERSION) +endif +TIMESTAMP_FILE = $(obj)include/timestamp_autogenerated.h VERSION_FILE = $(obj)include/version_autogenerated.h HOSTARCH := $(shell uname -m | \ @@ -40,7 +45,12 @@ HOSTARCH := $(shell uname -m | \ HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \ sed -e 's/\(cygwin\).*/cygwin/') -export HOSTARCH HOSTOS +# Set shell to bash if possible, otherwise fall back to sh +SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \ + else if [ -x /bin/bash ]; then echo /bin/bash; \ + else echo sh; fi; fi) + +export HOSTARCH HOSTOS SHELL # Deal with colliding definitions from tcsh etc. VENDOR= @@ -199,6 +209,7 @@ endif OBJS := $(addprefix $(obj),$(OBJS)) LIBS = lib_generic/libgeneric.a +LIBS += lib_generic/lzma/liblzma.a LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \ "board/$(VENDOR)/common/lib$(VENDOR).a"; fi) LIBS += cpu/$(CPU)/lib$(CPU).a @@ -216,6 +227,7 @@ LIBS += disk/libdisk.a LIBS += drivers/bios_emulator/libatibiosemu.a LIBS += drivers/block/libblock.a LIBS += drivers/dma/libdma.a +LIBS += drivers/fpga/libfpga.a LIBS += drivers/hwmon/libhwmon.a LIBS += drivers/i2c/libi2c.a LIBS += drivers/input/libinput.a @@ -225,6 +237,7 @@ LIBS += drivers/mtd/libmtd.a LIBS += drivers/mtd/nand/libnand.a LIBS += drivers/mtd/nand_legacy/libnand_legacy.a LIBS += drivers/mtd/onenand/libonenand.a +LIBS += drivers/mtd/ubi/libubi.a LIBS += drivers/mtd/spi/libspi_flash.a LIBS += drivers/net/libnet.a LIBS += drivers/net/phy/libphy.a @@ -238,9 +251,11 @@ endif ifeq ($(CPU),mpc85xx) LIBS += drivers/qe/qe.a LIBS += cpu/mpc8xxx/ddr/libddr.a +TAG_SUBDIRS += cpu/mpc8xxx endif ifeq ($(CPU),mpc86xx) LIBS += cpu/mpc8xxx/ddr/libddr.a +TAG_SUBDIRS += cpu/mpc8xxx endif LIBS += drivers/rtc/librtc.a LIBS += drivers/serial/libserial.a @@ -252,7 +267,7 @@ LIBS += api/libapi.a LIBS += post/libpost.a LIBS := $(addprefix $(obj),$(LIBS)) -.PHONY : $(LIBS) $(VERSION_FILE) +.PHONY : $(LIBS) $(TIMESTAMP_FILE) $(VERSION_FILE) LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).a LIBBOARD := $(addprefix $(obj),$(LIBBOARD)) @@ -295,7 +310,7 @@ $(obj)u-boot.hex: $(obj)u-boot $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ $(obj)u-boot.srec: $(obj)u-boot - $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ + $(OBJCOPY) -O srec $< $@ $(obj)u-boot.bin: $(obj)u-boot $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ @@ -344,13 +359,13 @@ $(SUBDIRS): depend $(obj)include/autoconf.mk $(LDSCRIPT): depend $(obj)include/autoconf.mk $(MAKE) -C $(dir $@) $(notdir $@) -$(NAND_SPL): $(VERSION_FILE) $(obj)include/autoconf.mk +$(NAND_SPL): $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk $(MAKE) -C nand_spl/board/$(BOARDDIR) all $(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin $(obj)include/autoconf.mk cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin -$(ONENAND_IPL): $(VERSION_FILE) $(obj)include/autoconf.mk +$(ONENAND_IPL): $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk $(MAKE) -C onenand_ipl/board/$(BOARDDIR) all $(U_BOOT_ONENAND): $(ONENAND_IPL) $(obj)u-boot.bin $(obj)include/autoconf.mk @@ -359,10 +374,13 @@ $(U_BOOT_ONENAND): $(ONENAND_IPL) $(obj)u-boot.bin $(obj)include/autoconf.mk $(VERSION_FILE): @( printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' "$(U_BOOT_VERSION)" \ - '$(shell $(CONFIG_SHELL) $(TOPDIR)/tools/setlocalversion $(TOPDIR))' \ - ) > $@.tmp + '$(shell $(TOPDIR)/tools/setlocalversion $(TOPDIR))' ) > $@.tmp @cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@ +$(TIMESTAMP_FILE): + @date +'#define U_BOOT_DATE "%b %d %C%y"' > $@ + @date +'#define U_BOOT_TIME "%T"' >> $@ + gdbtools: $(MAKE) -C tools/gdb all || exit 1 @@ -372,7 +390,7 @@ updater: env: $(MAKE) -C tools/env all MTD_VERSION=${MTD_VERSION} || exit 1 -depend dep: $(VERSION_FILE) +depend dep: $(TIMESTAMP_FILE) $(VERSION_FILE) for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir _depend ; done TAG_SUBDIRS += include @@ -445,7 +463,8 @@ $(obj)include/autoconf.mk: $(obj)include/config.h set -e ; \ : Extract the config macros ; \ $(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \ - sed -n -f tools/scripts/define2mk.sed > $@ + sed -n -f tools/scripts/define2mk.sed > $@.tmp && \ + mv $@.tmp $@ sinclude $(obj)include/autoconf.mk.dep @@ -453,7 +472,7 @@ sinclude $(obj)include/autoconf.mk.dep else # !config.mk all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \ $(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \ -$(SUBDIRS) $(VERSION_FILE) gdbtools updater env depend \ +$(SUBDIRS) $(TIMESTAMP_FILE) $(VERSION_FILE) gdbtools updater env depend \ dep tags ctags etags cscope $(obj)System.map: @echo "System not configured - see README" >&2 @ exit 1 @@ -917,7 +936,7 @@ MBX860T_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx mbx8xx mgsuvd_config: unconfig - @$(MKCONFIG) $(@:_config=) ppc mpc8xx mgsuvd + @$(MKCONFIG) $(@:_config=) ppc mpc8xx mgsuvd keymile MHPC_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx mhpc eltec @@ -1059,7 +1078,7 @@ RPXlite_DW_config: unconfig $(XECHO) "... with LCD display ..."; \ } @[ -z "$(findstring _NVRAM,$@)" ] || \ - { echo "#define CFG_ENV_IS_IN_NVRAM" >>$(obj)include/config.h ; \ + { echo "#define CONFIG_ENV_IS_IN_NVRAM" >>$(obj)include/config.h ; \ $(XECHO) "... with ENV in NVRAM ..."; \ } @$(MKCONFIG) -a RPXlite_DW ppc mpc8xx RPXlite_dw @@ -1201,7 +1220,8 @@ bubinga_config: unconfig CANBT_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx canbt esd -# Canyonlands & Glacier use different U-Boot images +# Arches, Canyonlands & Glacier use different U-Boot images +arches_config \ canyonlands_config \ glacier_config: unconfig @mkdir -p $(obj)include @@ -1242,12 +1262,12 @@ CMS700_config: unconfig CPCI2DP_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd -CPCI405_config \ -CPCI4052_config \ +CPCI405_config \ +CPCI4052_config \ CPCI405DT_config \ CPCI405AB_config: unconfig + @mkdir -p $(obj)board/esd/cpci405 @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd - @echo "BOARD_REVISION = $(@:_config=)" >> $(obj)include/config.mk CPCIISER4_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpciiser4 esd @@ -1282,6 +1302,24 @@ ERIC_config: unconfig EXBITGEN_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx exbitgen +fx12mm_flash_config: unconfig + @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic + @mkdir -p $(obj)include $(obj)board/avnet/fx12mm + @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\ + > $(obj)board/avnet/fx12mm/config.tmp + @echo "TEXT_BASE := 0xFFCB0000" \ + >> $(obj)board/avnet/fx12mm/config.tmp + @$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet + +fx12mm_config: unconfig + @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic + @mkdir -p $(obj)include $(obj)board/avnet/fx12mm + @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\ + > $(obj)board/avnet/fx12mm/config.tmp + @echo "TEXT_BASE := 0x03000000" \ + >> $(obj)board/avnet/fx12mm/config.tmp + @$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet + G2000_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000 @@ -1356,16 +1394,26 @@ ML2_config: unconfig ml300_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml300 xilinx -ml507_flash_config: unconfig +ml507_flash_config: unconfig + @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic @mkdir -p $(obj)include $(obj)board/xilinx/ml507 - @cp $(obj)board/xilinx/ml507/u-boot-rom.lds $(obj)board/xilinx/ml507/u-boot.lds - @echo "TEXT_BASE = 0xFE360000" > $(obj)board/xilinx/ml507/config.tmp - @$(MKCONFIG) $(@:_flash_config=) ppc ppc4xx ml507 xilinx - -ml507_config: unconfig + @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\ + > $(obj)board/xilinx/ml507/config.tmp + @echo "TEXT_BASE := 0xFE360000" \ + >> $(obj)board/xilinx/ml507/config.tmp + @$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx + +ml507_config: unconfig + @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic @mkdir -p $(obj)include $(obj)board/xilinx/ml507 - @cp $(obj)board/xilinx/ml507/u-boot-ram.lds $(obj)board/xilinx/ml507/u-boot.lds - @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml507 xilinx + @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\ + > $(obj)board/xilinx/ml507/config.tmp + @echo "TEXT_BASE := 0x04000000" \ + >> $(obj)board/xilinx/ml507/config.tmp + @$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx + +neo_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc ppc4xx neo gdsys ocotea_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocotea amcc @@ -1461,6 +1509,24 @@ taihu_config: unconfig taishan_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc +v5fx30teval_config: unconfig + @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic + @mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval + @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\ + > $(obj)board/avnet/v5fx30teval/config.tmp + @echo "TEXT_BASE := 0x03000000" \ + >> $(obj)board/avnet/v5fx30teval/config.tmp + @$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet + +v5fx30teval_flash_config: unconfig + @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic + @mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval + @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\ + > $(obj)board/avnet/v5fx30teval/config.tmp + @echo "TEXT_BASE := 0xFF1C0000" \ + >> $(obj)board/avnet/v5fx30teval/config.tmp + @$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet + VOH405_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx voh405 esd @@ -1479,6 +1545,38 @@ sycamore_config: unconfig WUH405_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx wuh405 esd +xilinx-ppc405-generic_flash_config: unconfig + @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic + @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\ + > $(obj)board/xilinx/ppc405-generic/config.tmp + @echo "TEXT_BASE := 0xFE360000" \ + >> $(obj)board/xilinx/ppc405-generic/config.tmp + @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx + +xilinx-ppc405-generic_config: unconfig + @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic + @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\ + > $(obj)board/xilinx/ppc405-generic/config.tmp + @echo "TEXT_BASE := 0x04000000" \ + >> $(obj)board/xilinx/ppc405-generic/config.tmp + @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx + +xilinx-ppc440-generic_flash_config: unconfig + @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic + @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\ + > $(obj)board/xilinx/ppc440-generic/config.tmp + @echo "TEXT_BASE := 0xFE360000" \ + >> $(obj)board/xilinx/ppc440-generic/config.tmp + @$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx + +xilinx-ppc440-generic_config: unconfig + @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic + @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\ + > $(obj)board/xilinx/ppc440-generic/config.tmp + @echo "TEXT_BASE := 0x04000000" \ + >> $(obj)board/xilinx/ppc440-generic/config.tmp + @$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx + XPEDITE1K_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1k @@ -1652,12 +1750,12 @@ ISPAN_config \ ISPAN_REVB_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _REVB_,$@)" ] ; then \ - echo "#define CFG_REV_B" > $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_REV_B" > $(obj)include/config.h ; \ fi @$(MKCONFIG) -a ISPAN ppc mpc8260 ispan mgcoge_config : unconfig - @$(MKCONFIG) mgcoge ppc mpc8260 mgcoge + @$(MKCONFIG) mgcoge ppc mpc8260 mgcoge keymile MPC8260ADS_config \ MPC8260ADS_lowboot_config \ @@ -1679,8 +1777,8 @@ PQ2FADS-ZU_66MHz_lowboot_config \ @mkdir -p $(obj)include @mkdir -p $(obj)board/freescale/mpc8260ads $(if $(findstring PQ2FADS,$@), \ - @echo "#define CONFIG_ADSTYPE CFG_PQ2FADS" > $(obj)include/config.h, \ - @echo "#define CONFIG_ADSTYPE CFG_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h) + @echo "#define CONFIG_ADSTYPE CONFIG_SYS_PQ2FADS" > $(obj)include/config.h, \ + @echo "#define CONFIG_ADSTYPE CONFIG_SYS_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h) $(if $(findstring MHz,$@), \ @echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> $(obj)include/config.h, \ $(if $(findstring VR,$@), \ @@ -1843,7 +1941,27 @@ ZPC1900_config: unconfig ## Coldfire ######################################################################### -M52277EVB_config: unconfig +M52277EVB_config \ +M52277EVB_spansion_config \ +M52277EVB_stmicro_config : unconfig + @case "$@" in \ + M52277EVB_config) FLASH=SPANSION;; \ + M52277EVB_spansion_config) FLASH=SPANSION;; \ + M52277EVB_stmicro_config) FLASH=STMICRO;; \ + esac; \ + if [ "$${FLASH}" = "SPANSION" ] ; then \ + echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \ + echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \ + cp $(obj)board/freescale/m52277evb/u-boot.spa $(obj)board/freescale/m52277evb/u-boot.lds ; \ + $(XECHO) "... with SPANSION boot..." ; \ + fi; \ + if [ "$${FLASH}" = "STMICRO" ] ; then \ + echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ + echo "TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \ + cp $(obj)board/freescale/m52277evb/u-boot.stm $(obj)board/freescale/m52277evb/u-boot.lds ; \ + $(XECHO) "... with ST Micro boot..." ; \ + fi @$(MKCONFIG) -a M52277EVB m68k mcf5227x m52277evb freescale M5235EVB_config \ @@ -1903,6 +2021,9 @@ M5275EVB_config : unconfig M5282EVB_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb freescale +M53017EVB_config : unconfig + @$(MKCONFIG) $(@:_config=) m68k mcf532x m53017evb freescale + M5329AFEE_config \ M5329BFEE_config : unconfig @case "$@" in \ @@ -1932,19 +2053,19 @@ M54451EVB_stmicro_config : unconfig M54451EVB_stmicro_config) FLASH=STMICRO;; \ esac; \ if [ "$${FLASH}" = "SPANSION" ] ; then \ - echo "#define CFG_SPANSION_BOOT" >> $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \ echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \ cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \ $(XECHO) "... with SPANSION boot..." ; \ fi; \ if [ "$${FLASH}" = "STMICRO" ] ; then \ echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ - echo "#define CFG_STMICRO_BOOT" >> $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ echo "TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \ cp $(obj)board/freescale/m54451evb/u-boot.stm $(obj)board/freescale/m54451evb/u-boot.lds ; \ $(XECHO) "... with ST Micro boot..." ; \ fi; \ - echo "#define CFG_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ; + echo "#define CONFIG_SYS_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ; @$(MKCONFIG) -a M54451EVB m68k mcf5445x m54451evb freescale M54455EVB_config \ @@ -1966,25 +2087,25 @@ M54455EVB_stm33_config : unconfig M54455EVB_stm33_config) FLASH=STMICRO; FREQ=33333333;; \ esac; \ if [ "$${FLASH}" = "INTEL" ] ; then \ - echo "#define CFG_INTEL_BOOT" >> $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_INTEL_BOOT" >> $(obj)include/config.h ; \ echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \ cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \ $(XECHO) "... with INTEL boot..." ; \ fi; \ if [ "$${FLASH}" = "ATMEL" ] ; then \ - echo "#define CFG_ATMEL_BOOT" >> $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_ATMEL_BOOT" >> $(obj)include/config.h ; \ echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \ cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \ $(XECHO) "... with ATMEL boot..." ; \ fi; \ if [ "$${FLASH}" = "STMICRO" ] ; then \ echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ - echo "#define CFG_STMICRO_BOOT" >> $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ echo "TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \ cp $(obj)board/freescale/m54455evb/u-boot.stm $(obj)board/freescale/m54455evb/u-boot.lds ; \ $(XECHO) "... with ST Micro boot..." ; \ fi; \ - echo "#define CFG_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \ $(XECHO) "... with $${FREQ}Hz input clock" @$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale @@ -2004,20 +2125,20 @@ M5475GFE_config : unconfig M5475FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \ M5475GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ esac; \ - echo "#define CFG_BUSCLK 133333333" > $(obj)include/config.h ; \ - echo "#define CFG_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \ - echo "#define CFG_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_BUSCLK 133333333" > $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \ if [ "$${RAM1}" != "0" ] ; then \ - echo "#define CFG_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \ fi; \ if [ "$${CODE}" != "0" ] ; then \ - echo "#define CFG_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \ fi; \ if [ "$${VID}" == "1" ] ; then \ - echo "#define CFG_VIDEO" >> $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \ fi; \ if [ "$${USB}" == "1" ] ; then \ - echo "#define CFG_USBCTRL" >> $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \ fi @$(MKCONFIG) -a M5475EVB m68k mcf547x_8x m547xevb freescale @@ -2039,20 +2160,20 @@ M5485HFE_config : unconfig M5485GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ M5485HFE_config) BOOT=2;CODE=16;VID=1;USB=0;RAM=64;RAM1=0;; \ esac; \ - echo "#define CFG_BUSCLK 100000000" > $(obj)include/config.h ; \ - echo "#define CFG_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \ - echo "#define CFG_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_BUSCLK 100000000" > $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \ if [ "$${RAM1}" != "0" ] ; then \ - echo "#define CFG_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \ fi; \ if [ "$${CODE}" != "0" ] ; then \ - echo "#define CFG_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \ fi; \ if [ "$${VID}" == "1" ] ; then \ - echo "#define CFG_VIDEO" >> $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \ fi; \ if [ "$${USB}" == "1" ] ; then \ - echo "#define CFG_USBCTRL" >> $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \ fi @$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale @@ -2071,11 +2192,11 @@ MPC8313ERDB_NAND_66_config: unconfig @mkdir -p $(obj)board/freescale/mpc8313erdb @if [ "$(findstring _33_,$@)" ] ; then \ $(XECHO) -n "...33M ..." ; \ - echo "#define CFG_33MHZ" >>$(obj)include/config.h ; \ + echo "#define CONFIG_SYS_33MHZ" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _66_,$@)" ] ; then \ $(XECHO) -n "...66M..." ; \ - echo "#define CFG_66MHZ" >>$(obj)include/config.h ; \ + echo "#define CONFIG_SYS_66MHZ" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _NAND_,$@)" ] ; then \ $(XECHO) -n "...NAND..." ; \ @@ -2083,6 +2204,9 @@ MPC8313ERDB_NAND_66_config: unconfig echo "#define CONFIG_NAND_U_BOOT" >>$(obj)include/config.h ; \ fi ; @$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb freescale + @if [ "$(findstring _NAND_,$@)" ] ; then \ + echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \ + fi ; MPC8315ERDB_config: unconfig @$(MKCONFIG) -a MPC8315ERDB ppc mpc83xx mpc8315erdb freescale @@ -2344,8 +2468,14 @@ TQM8560_config: unconfig MPC8610HPCD_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8610hpcd freescale +MPC8641HPCN_36BIT_config \ MPC8641HPCN_config: unconfig - @$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8641hpcn freescale + @mkdir -p $(obj)include + @if [ "$(findstring _36BIT_,$@)" ] ; then \ + echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \ + $(XECHO) "... enabling 36-bit physical addressing." ; \ + fi + @$(MKCONFIG) -a MPC8641HPCN ppc mpc86xx mpc8641hpcn freescale sbc8641d_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc86xx sbc8641d @@ -2435,15 +2565,6 @@ shannon_config : unconfig at91rm9200dk_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200 -at91sam9261ek_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9261ek atmel at91 - -at91sam9263ek_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9263ek atmel at91 - -at91sam9rlek_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9rlek atmel at91 - cmc_pu2_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200 @@ -2463,11 +2584,69 @@ mp2usb_config : unconfig ## Atmel ARM926EJ-S Systems ######################################################################### +afeb9260_config: unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs afeb9260 NULL at91 + at91cap9adk_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91 +at91sam9260ek_nandflash_config \ +at91sam9260ek_dataflash_cs0_config \ +at91sam9260ek_dataflash_cs1_config \ at91sam9260ek_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9260ek atmel at91 + @if [ "$(findstring _nandflash,$@)" ] ; then \ + echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ + $(XECHO) "... with environment variable in NAND FLASH" ; \ + elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ + echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ + $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ + else \ + echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \ + $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \ + fi; + @$(MKCONFIG) -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91 + +at91sam9261ek_nandflash_config \ +at91sam9261ek_dataflash_cs0_config \ +at91sam9261ek_dataflash_cs3_config \ +at91sam9261ek_config : unconfig + @if [ "$(findstring _nandflash,$@)" ] ; then \ + echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ + $(XECHO) "... with environment variable in NAND FLASH" ; \ + elif [ "$(findstring dataflash_cs3,$@)" ] ; then \ + echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1" >>$(obj)include/config.h ; \ + $(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \ + else \ + echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ + $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ + fi; + @$(MKCONFIG) -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91 + +at91sam9263ek_nandflash_config \ +at91sam9263ek_dataflash_config \ +at91sam9263ek_dataflash_cs0_config \ +at91sam9263ek_config : unconfig + @if [ "$(findstring _nandflash,$@)" ] ; then \ + echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ + $(XECHO) "... with environment variable in NAND FLASH" ; \ + else \ + echo "#define CONFIG_SYS_USE_DATAFLASH 1" >>$(obj)include/config.h ; \ + $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ + fi; + @$(MKCONFIG) -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91 + +at91sam9rlek_nandflash_config \ +at91sam9rlek_dataflash_config \ +at91sam9rlek_dataflash_cs0_config \ +at91sam9rlek_config : unconfig + @if [ "$(findstring _nandflash,$@)" ] ; then \ + echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ + $(XECHO) "... with environment variable in NAND FLASH" ; \ + else \ + echo "#define CONFIG_SYS_USE_DATAFLASH 1" >>$(obj)include/config.h ; \ + $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ + fi; + @$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91 ######################################################################## ## ARM Integrator boards - see doc/README-integrator for more info. @@ -2972,11 +3151,6 @@ suzaku_config: unconfig @echo "#define CONFIG_SUZAKU 1" > $(obj)include/config.h @$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno -xupv2p_config: unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_XUPV2P 1" > $(obj)include/config.h - @$(MKCONFIG) -a $(@:_config=) microblaze microblaze xupv2p xilinx - #======================================================================== # Blackfin #======================================================================== @@ -3029,7 +3203,7 @@ mimc200_config : unconfig rsk7203_config: unconfig @ >include/config.h @echo "#define CONFIG_RSK7203 1" >> include/config.h - @./mkconfig -a $(@:_config=) sh sh2 rsk7203 + @$(MKCONFIG) -a $(@:_config=) sh sh2 rsk7203 renesas ######################################################################### ## sh3 (Renesas SuperH) @@ -3052,7 +3226,7 @@ ms7720se_config: unconfig MigoR_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h - @./mkconfig -a $(@:_config=) sh sh4 MigoR + @$(MKCONFIG) -a $(@:_config=) sh sh4 MigoR renesas ms7750se_config: unconfig @mkdir -p $(obj)include @@ -3067,27 +3241,27 @@ ms7722se_config : unconfig r2dplus_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h - @$(MKCONFIG) -a $(@:_config=) sh sh4 r2dplus + @$(MKCONFIG) -a $(@:_config=) sh sh4 r2dplus renesas r7780mp_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h - @$(MKCONFIG) -a $(@:_config=) sh sh4 r7780mp + @$(MKCONFIG) -a $(@:_config=) sh sh4 r7780mp renesas sh7763rdp_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h - @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7763rdp + @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7763rdp renesas sh7785lcr_config : unconfig @ >include/config.h @echo "#define CONFIG_SH7785LCR 1" >> include/config.h - @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7785lcr + @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7785lcr renesas ap325rxa_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h - @$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa + @$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa renesas #======================================================================== # SPARC @@ -3148,7 +3322,7 @@ clean: @rm -f $(obj)include/bmp_logo.h @rm -f $(obj)nand_spl/{u-boot-spl,u-boot-spl.map,System.map} @rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl-2k.bin,ipl-4k.bin,ipl.map} - @rm -f $(obj)api_examples/demo $(VERSION_FILE) + @rm -f $(obj)api_examples/demo $(TIMESTAMP_FILE) $(VERSION_FILE) @find $(OBJTREE) -type f \ \( -name 'core' -o -name '*.bak' -o -name '*~' \ -o -name '*.o' -o -name '*.a' \) -print \ @@ -3162,7 +3336,7 @@ clobber: clean @rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \ $(obj)cscope.* $(obj)*.*~ @rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL) - @rm -f $(obj)tools/{crc32.c,environment.c,env/crc32.c,md5.c,sha1.c,inca-swap-bytes} + @rm -f $(obj)tools/{crc32.c,env_embedded.c,env/crc32.c,md5.c,sha1.c,inca-swap-bytes} @rm -f $(obj)tools/{image.c,fdt.c,fdt_ro.c,fdt_rw.c,fdt_strerror.c,zlib.h} @rm -f $(obj)tools/{fdt_wip.c,libfdt_internal.h} @rm -f $(obj)cpu/mpc824x/bedbug_603e.c |