diff options
Diffstat (limited to 'board/esd/pmc440/cmd_pmc440.c')
| -rw-r--r-- | board/esd/pmc440/cmd_pmc440.c | 84 |
1 files changed, 44 insertions, 40 deletions
diff --git a/board/esd/pmc440/cmd_pmc440.c b/board/esd/pmc440/cmd_pmc440.c index ca5c177e3..16c9c7eea 100644 --- a/board/esd/pmc440/cmd_pmc440.c +++ b/board/esd/pmc440/cmd_pmc440.c @@ -26,6 +26,9 @@ #include <asm/io.h> #include <asm/cache.h> #include <asm/processor.h> +#if defined(CONFIG_LOGBUFFER) +#include <logbuff.h> +#endif #include "pmc440.h" @@ -323,7 +326,7 @@ int do_setup_bootstrap_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[] } printf("Writing boot EEPROM ...\n"); - if (bootstrap_eeprom_write(CFG_I2C_BOOT_EEPROM_ADDR, + if (bootstrap_eeprom_write(CONFIG_SYS_I2C_BOOT_EEPROM_ADDR, 0, (uchar*)sdsdp, count) != 0) printf("bootstrap_eeprom_write failed\n"); else @@ -343,14 +346,11 @@ extern env_t *env_ptr; int do_painit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { - u32 memsize; - u32 pram, env_base; + u32 pram, nextbase, base; char *v; u32 param; ulong *lptr; - memsize = gd->bd->bi_memsize; - v = getenv("pram"); if (v) pram = simple_strtoul(v, NULL, 10); @@ -359,21 +359,42 @@ int do_painit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return 1; } - param = memsize - (pram << 10); + base = gd->bd->bi_memsize; +#if defined(CONFIG_LOGBUFFER) + base -= LOGBUFF_LEN + LOGBUFF_OVERHEAD; +#endif + /* + * gd->bd->bi_memsize == physical ram size - CONFIG_SYS_MEM_TOP_HIDE + */ + param = base - (pram << 10); printf("PARAM: @%08x\n", param); + debug("memsize=0x%08x, base=0x%08x\n", gd->bd->bi_memsize, base); + /* clear entire PA ram */ memset((void*)param, 0, (pram << 10)); - env_base = memsize - 4096 - ((CFG_ENV_SIZE + 4096) & ~(4096-1)); - memcpy((void*)env_base, env_ptr, CFG_ENV_SIZE); - lptr = (ulong*)memsize; - *(--lptr) = CFG_ENV_SIZE; - *(--lptr) = memsize - env_base; - *(--lptr) = crc32(0, (void*)(memsize - 0x08), 0x08); - *(--lptr) = 0; + /* reserve 4k for pointer field */ + nextbase = base - 4096; + lptr = (ulong*)(base); + + /* + * *(--lptr) = item_size; + * *(--lptr) = base - item_base = distance from field top; + */ + + /* env is first (4k aligned) */ + nextbase -= ((CONFIG_ENV_SIZE + 4096 - 1) & ~(4096 - 1)); + memcpy((void*)nextbase, env_ptr, CONFIG_ENV_SIZE); + *(--lptr) = CONFIG_ENV_SIZE; /* size */ + *(--lptr) = base - nextbase; /* offset | type=0 */ + + /* free section */ + *(--lptr) = nextbase - param; /* size */ + *(--lptr) = (base - param) | 126; /* offset | type=126 */ - /* make sure data can be accessed through PCI */ - flush_dcache_range(param, param + (pram << 10) - 1); + /* terminate pointer field */ + *(--lptr) = crc32(0, (void*)(base - 0x10), 0x10); + *(--lptr) = 0; /* offset=0 -> terminator */ return 0; } U_BOOT_CMD( @@ -385,28 +406,11 @@ U_BOOT_CMD( int do_selfreset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { - if (argc > 1) { - if (argv[1][0] == '0') { - /* assert */ - printf("self-reset# asserted\n"); - out_be32((void*)GPIO0_TCR, - in_be32((void*)GPIO0_TCR) | GPIO0_SELF_RST); - } else { - /* deassert */ - printf("self-reset# deasserted\n"); - out_be32((void*)GPIO0_TCR, - in_be32((void*)GPIO0_TCR) & ~GPIO0_SELF_RST); - } - } else { - printf("self-reset# is %s\n", - in_be32((void*)GPIO0_TCR) & GPIO0_SELF_RST ? - "active" : "inactive"); - } - + in_be32((void*)CONFIG_SYS_RESET_BASE); return 0; } U_BOOT_CMD( - selfreset, 2, 1, do_selfreset, + selfreset, 1, 1, do_selfreset, "selfreset- assert self-reset# signal\n", NULL ); @@ -513,7 +517,7 @@ U_BOOT_CMD( "<pciaddr> (pciaddr will be aligned to 256MB)\n" ); -#if defined(CFG_EEPROM_WREN) +#if defined(CONFIG_SYS_EEPROM_WREN) int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { int query = argc == 1; @@ -521,21 +525,21 @@ int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) if (query) { /* Query write access state. */ - state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, -1); + state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, -1); if (state < 0) { puts("Query of write access state failed.\n"); } else { printf("Write access for device 0x%0x is %sabled.\n", - CFG_I2C_EEPROM_ADDR, state ? "en" : "dis"); + CONFIG_SYS_I2C_EEPROM_ADDR, state ? "en" : "dis"); state = 0; } } else { if ('0' == argv[1][0]) { /* Disable write access. */ - state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, 0); + state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, 0); } else { /* Enable write access. */ - state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, 1); + state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, 1); } if (state < 0) { puts("Setup of write access state failed.\n"); @@ -547,6 +551,6 @@ int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, "eepwren - Enable / disable / query EEPROM write access\n", NULL); -#endif /* #if defined(CFG_EEPROM_WREN) */ +#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */ #endif /* CONFIG_CMD_BSP */ |