diff options
Diffstat (limited to 'cpu/mpc83xx/cpu.c')
| -rw-r--r-- | cpu/mpc83xx/cpu.c | 66 |
1 files changed, 37 insertions, 29 deletions
diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c index 52e4476d8..587fca323 100644 --- a/cpu/mpc83xx/cpu.c +++ b/cpu/mpc83xx/cpu.c @@ -32,6 +32,8 @@ #include <mpc83xx.h> #include <asm/processor.h> #include <libfdt.h> +#include <tsec.h> +#include <netdev.h> DECLARE_GLOBAL_DATA_PTR; @@ -66,7 +68,7 @@ int checkcpu(void) CPU_TYPE_ENTRY(8379), }; - immr = (immap_t *)CFG_IMMR; + immr = (immap_t *)CONFIG_SYS_IMMR; puts("CPU: "); @@ -123,8 +125,8 @@ int checkcpu(void) * The 'dummy' variable is used to increment the MAD. 'dummy' is * supposed to be a pointer to the memory of the device being * programmed by the UPM. The data in the MDR is written into - * memory and the MAD is incremented every time there's a read - * from 'dummy'. Unfortunately, the current prototype for this + * memory and the MAD is incremented every time there's a write + * to 'dummy'. Unfortunately, the current prototype for this * function doesn't allow for passing the address of this * device, and changing the prototype will break a number lots * of other code, so we need to use a round-about way of finding @@ -146,9 +148,8 @@ int checkcpu(void) */ void upmconfig (uint upm, uint *table, uint size) { -#if defined(CONFIG_MPC834X) - volatile immap_t *immap = (immap_t *) CFG_IMMR; - volatile lbus83xx_t *lbus = &immap->lbus; + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; + volatile fsl_lbus_t *lbus = &immap->lbus; volatile uchar *dummy = NULL; const u32 msel = (upm + 4) << BR_MSEL_SHIFT; /* What the MSEL field in BRn should be */ volatile u32 *mxmr = &lbus->mamr + upm; /* Pointer to mamr, mbmr, or mcmr */ @@ -173,16 +174,13 @@ void upmconfig (uint upm, uint *table, uint size) for (i = 0; i < size; i++) { lbus->mdr = table[i]; __asm__ __volatile__ ("sync"); - *dummy; /* Write the value to memory and increment MAD */ + *dummy = 0; /* Write the value to memory and increment MAD */ __asm__ __volatile__ ("sync"); + while(((*mxmr & 0x3f) != ((i + 1) & 0x3f))); } /* Set the OP field in the MxMR to "normal" and the MAD field to 000000 */ *mxmr &= 0xCFFFFFC0; -#else - printf("Error: %s() not defined for this configuration.\n", __FUNCTION__); - hang(); -#endif } @@ -194,7 +192,7 @@ do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) ulong addr; #endif - volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; #ifdef MPC83xx_RESET /* Interrupts and MMU off */ @@ -233,7 +231,7 @@ do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) * Trying to execute the next instruction at a non-existing address * should cause a machine check, resulting in reset */ - addr = CFG_RESET_ADDRESS; + addr = CONFIG_SYS_RESET_ADDRESS; printf("resetting the board."); printf("\n"); @@ -264,7 +262,7 @@ void watchdog_reset (void) int re_enable = disable_interrupts(); /* Reset the 83xx watchdog */ - volatile immap_t *immr = (immap_t *) CFG_IMMR; + volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; immr->wdt.swsrr = 0x556c; immr->wdt.swsrr = 0xaa39; @@ -276,7 +274,7 @@ void watchdog_reset (void) #if defined(CONFIG_DDR_ECC) void dma_init(void) { - volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; volatile dma83xx_t *dma = &immap->dma; volatile u32 status = swab32(dma->dmasr0); volatile u32 dmamr0 = swab32(dma->dmamr0); @@ -307,7 +305,7 @@ void dma_init(void) uint dma_check(void) { - volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; volatile dma83xx_t *dma = &immap->dma; volatile u32 status = swab32(dma->dmasr0); volatile u32 byte_count = swab32(dma->dmabcr0); @@ -326,7 +324,7 @@ uint dma_check(void) int dma_xfer(void *dest, u32 count, void *src) { - volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; volatile dma83xx_t *dma = &immap->dma; volatile u32 dmamr0; @@ -358,22 +356,32 @@ int dma_xfer(void *dest, u32 count, void *src) } #endif /*CONFIG_DDR_ECC*/ -#ifdef CONFIG_TSEC_ENET -/* Default initializations for TSEC controllers. To override, - * create a board-specific function called: - * int board_eth_init(bd_t *bis) +/* + * Initializes on-chip ethernet controllers. + * to override, implement board_eth_init() */ - -extern int tsec_initialize(bd_t * bis, int index, char *devname); - int cpu_eth_init(bd_t *bis) { -#if defined(CONFIG_TSEC1) - tsec_initialize(bis, 0, CONFIG_TSEC1_NAME); +#if defined(CONFIG_UEC_ETH1) + uec_initialize(0); +#endif +#if defined(CONFIG_UEC_ETH2) + uec_initialize(1); #endif -#if defined(CONFIG_TSEC2) - tsec_initialize(bis, 1, CONFIG_TSEC2_NAME); +#if defined(CONFIG_UEC_ETH3) + uec_initialize(2); +#endif +#if defined(CONFIG_UEC_ETH4) + uec_initialize(3); +#endif +#if defined(CONFIG_UEC_ETH5) + uec_initialize(4); +#endif +#if defined(CONFIG_UEC_ETH6) + uec_initialize(5); +#endif +#if defined(CONFIG_TSEC_ENET) + tsec_standard_init(bis); #endif return 0; } -#endif |