diff options
Diffstat (limited to 'drivers/qe/uec_phy.c')
| -rw-r--r-- | drivers/qe/uec_phy.c | 103 |
1 files changed, 103 insertions, 0 deletions
diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c index 186922e0c..829f08285 100644 --- a/drivers/qe/uec_phy.c +++ b/drivers/qe/uec_phy.c @@ -44,6 +44,54 @@ #define ugphy_vdbg(ugeth, fmt, args...) do { } while (0) #endif /* UEC_VERBOSE_DEBUG */ +/*--------------------------------------------------------------------+ + * Fixed PHY (PHY-less) support for Ethernet Ports. + * + * Copied from cpu/ppc4xx/4xx_enet.c + *--------------------------------------------------------------------*/ + +/* + * Some boards do not have a PHY for each ethernet port. These ports + * are known as Fixed PHY (or PHY-less) ports. For such ports, set + * the appropriate CONFIG_PHY_ADDR equal to CONFIG_FIXED_PHY and + * then define CONFIG_SYS_FIXED_PHY_PORTS to define what the speed and + * duplex should be for these ports in the board configuration + * file. + * + * For Example: + * #define CONFIG_FIXED_PHY 0xFFFFFFFF + * + * #define CONFIG_PHY_ADDR CONFIG_FIXED_PHY + * #define CONFIG_PHY1_ADDR 1 + * #define CONFIG_PHY2_ADDR CONFIG_FIXED_PHY + * #define CONFIG_PHY3_ADDR 3 + * + * #define CONFIG_SYS_FIXED_PHY_PORT(devnum,speed,duplex) \ + * {devnum, speed, duplex}, + * + * #define CONFIG_SYS_FIXED_PHY_PORTS \ + * CONFIG_SYS_FIXED_PHY_PORT(0,SPEED_100,DUPLEX_FULL) \ + * CONFIG_SYS_FIXED_PHY_PORT(2,SPEED_100,DUPLEX_HALF) + */ + +#ifndef CONFIG_FIXED_PHY +#define CONFIG_FIXED_PHY 0xFFFFFFFF /* Fixed PHY (PHY-less) */ +#endif + +#ifndef CONFIG_SYS_FIXED_PHY_PORTS +#define CONFIG_SYS_FIXED_PHY_PORTS /* default is an empty array */ +#endif + +struct fixed_phy_port { + unsigned int devnum; /* ethernet port */ + unsigned int speed; /* specified speed 10,100 or 1000 */ + unsigned int duplex; /* specified duplex FULL or HALF */ +}; + +static const struct fixed_phy_port fixed_phy_port[] = { + CONFIG_SYS_FIXED_PHY_PORTS /* defined in board configuration file */ +}; + static void config_genmii_advert (struct uec_mii_info *mii_info); static void genmii_setup_forced (struct uec_mii_info *mii_info); static void genmii_restart_aneg (struct uec_mii_info *mii_info); @@ -376,6 +424,29 @@ static int bcm_init(struct uec_mii_info *mii_info) return 0; } +static int marvell_init(struct uec_mii_info *mii_info) +{ + struct eth_device *edev = mii_info->dev; + uec_private_t *uec = edev->priv; + + if (uec->uec_info->enet_interface == ENET_1000_RGMII_ID) { + int temp; + + temp = phy_read(mii_info, MII_M1111_PHY_EXT_CR); + temp |= (MII_M1111_RX_DELAY | MII_M1111_TX_DELAY); + phy_write(mii_info, MII_M1111_PHY_EXT_CR, temp); + + temp = phy_read(mii_info, MII_M1111_PHY_EXT_SR); + temp &= ~MII_M1111_HWCFG_MODE_MASK; + temp |= MII_M1111_HWCFG_MODE_RGMII; + phy_write(mii_info, MII_M1111_PHY_EXT_SR, temp); + + phy_write(mii_info, PHY_BMCR, PHY_BMCR_RESET); + } + + return 0; +} + static int marvell_read_status (struct uec_mii_info *mii_info) { u16 status; @@ -510,6 +581,28 @@ static void dm9161_close (struct uec_mii_info *mii_info) { } +static int fixed_phy_aneg (struct uec_mii_info *mii_info) +{ + mii_info->autoneg = 0; /* Turn off auto negotiation for fixed phy */ + return 0; +} + +static int fixed_phy_read_status (struct uec_mii_info *mii_info) +{ + int i = 0; + + for (i = 0; i < ARRAY_SIZE(fixed_phy_port); i++) { + if (mii_info->mii_id == fixed_phy_port[i].devnum) { + mii_info->speed = fixed_phy_port[i].speed; + mii_info->duplex = fixed_phy_port[i].duplex; + mii_info->link = 1; /* Link is always UP */ + mii_info->pause = 0; + break; + } + } + return 0; +} + static struct phy_info phy_info_dm9161 = { .phy_id = 0x0181b880, .phy_id_mask = 0x0ffffff0, @@ -538,6 +631,7 @@ static struct phy_info phy_info_marvell = { .phy_id_mask = 0xffffff00, .name = "Marvell 88E11x1", .features = MII_GBIT_FEATURES, + .init = &marvell_init, .config_aneg = &marvell_config_aneg, .read_status = &marvell_read_status, .ack_interrupt = &marvell_ack_interrupt, @@ -553,6 +647,14 @@ static struct phy_info phy_info_bcm5481 = { .init = bcm_init, }; +static struct phy_info phy_info_fixedphy = { + .phy_id = CONFIG_FIXED_PHY, + .phy_id_mask = CONFIG_FIXED_PHY, + .name = "Fixed PHY", + .config_aneg = fixed_phy_aneg, + .read_status = fixed_phy_read_status, +}; + static struct phy_info phy_info_genmii = { .phy_id = 0x00000000, .phy_id_mask = 0x00000000, @@ -567,6 +669,7 @@ static struct phy_info *phy_info[] = { &phy_info_dm9161a, &phy_info_marvell, &phy_info_bcm5481, + &phy_info_fixedphy, &phy_info_genmii, NULL }; |