Squashandroid-20111012

Change-Id: If0ae9fa8067740ab2ede33703c79ec134f204a5e

1 files changed, 1172 insertions, 0 deletions

diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
new file mode 100644
index 00000000000..e281c117adb
--- /dev/null
+++ b/drivers/regulator/ab8500.c
@@ -0,0 +1,1172 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * Authors: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
+ *          Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson
+ *
+ * AB8500 peripheral regulators
+ *
+ * AB8500 supports the following regulators:
+ *   VAUX1/2/3, VINTCORE, VTVOUT, VUSB, VAUDIO, VAMIC1/2, VDMIC, VANA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/ab8500.h>
+#include <linux/mfd/abx500.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/ab8500.h>
+#include <linux/mfd/ab8500/ab8500-gpio.h> /* for sysclkreq pins */
+#include <mach/gpio.h> /* for sysclkreq pins */
+
+/**
+ * struct ab8500_regulator_info - ab8500 regulator information
+ * @dev: device pointer
+ * @desc: regulator description
+ * @regulator_dev: regulator device
+ * @is_enabled: status of regulator (on/off)
+ * @max_uV: maximum voltage (for variable voltage supplies)
+ * @min_uV: minimum voltage (for variable voltage supplies)
+ * @fixed_uV: typical voltage (for fixed voltage supplies)
+ * @load_lp_uA: maximum load in idle (low power) mode
+ * @update_bank: bank to control on/off
+ * @update_reg: register to control on/off
+ * @update_mask: mask to enable/disable and set mode of regulator
+ * @update_val: bits holding the regulator current mode
+ * @update_val_idle: bits to enable the regulator in idle (low power) mode
+ * @update_val_normal: bits to enable the regulator in normal (high power) mode
+ * @voltage_bank: bank to control regulator voltage
+ * @voltage_reg: register to control regulator voltage
+ * @voltage_mask: mask to control regulator voltage
+ * @voltages: supported voltage table
+ * @voltages_len: number of supported voltages for the regulator
+ * @delay: startup delay in ms
+ * @gpio_pin: gpio pin number (for sysclkreq regulator only)
+ */
+struct ab8500_regulator_info {
+	struct device		*dev;
+	struct regulator_desc	desc;
+	struct regulator_dev	*regulator;
+	bool is_enabled;
+	int max_uV;
+	int min_uV;
+	int fixed_uV;
+	int load_lp_uA;
+	u8 update_bank;
+	u8 update_reg;
+	u8 update_mask;
+	u8 update_val;
+	u8 update_val_idle;
+	u8 update_val_normal;
+	u8 voltage_bank;
+	u8 voltage_reg;
+	u8 voltage_mask;
+	int const *voltages;
+	int voltages_len;
+	unsigned int delay;
+	unsigned int gpio_pin;
+};
+
+/* voltage tables for the vauxn/vintcore supplies */
+static const int ldo_vauxn_voltages[] = {
+	1100000,
+	1200000,
+	1300000,
+	1400000,
+	1500000,
+	1800000,
+	1850000,
+	1900000,
+	2500000,
+	2650000,
+	2700000,
+	2750000,
+	2800000,
+	2900000,
+	3000000,
+	3300000,
+};
+
+static const int ldo_vaux3_voltages[] = {
+	1200000,
+	1500000,
+	1800000,
+	2100000,
+	2500000,
+	2750000,
+	2790000,
+	2910000,
+};
+
+static const int ldo_vintcore_voltages[] = {
+	1200000,
+	1225000,
+	1250000,
+	1275000,
+	1300000,
+	1325000,
+	1350000,
+};
+
+static int ab8500_regulator_enable(struct regulator_dev *rdev)
+{
+	int ret;
+	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+	if (info == NULL) {
+		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
+		return -EINVAL;
+	}
+
+	ret = abx500_mask_and_set_register_interruptible(info->dev,
+		info->update_bank, info->update_reg,
+		info->update_mask, info->update_val);
+	if (ret < 0)
+		dev_err(rdev_get_dev(rdev),
+			"couldn't set enable bits for regulator\n");
+
+	msleep(info->delay);
+
+	info->is_enabled = true;
+
+	dev_vdbg(rdev_get_dev(rdev),
+		"%s-enable (bank, reg, mask, value): 0x%x, 0x%x, 0x%x, 0x%x\n",
+		info->desc.name, info->update_bank, info->update_reg,
+		info->update_mask, info->update_val);
+
+	return ret;
+}
+
+static int ab8500_regulator_disable(struct regulator_dev *rdev)
+{
+	int ret;
+	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+	if (info == NULL) {
+		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
+		return -EINVAL;
+	}
+
+	ret = abx500_mask_and_set_register_interruptible(info->dev,
+		info->update_bank, info->update_reg,
+		info->update_mask, 0x0);
+	if (ret < 0)
+		dev_err(rdev_get_dev(rdev),
+			"couldn't set disable bits for regulator\n");
+
+	msleep(info->delay);
+
+	info->is_enabled = false;
+
+	dev_vdbg(rdev_get_dev(rdev),
+		"%s-disable (bank, reg, mask, value): 0x%x, 0x%x, 0x%x, 0x%x\n",
+		info->desc.name, info->update_bank, info->update_reg,
+		info->update_mask, 0x0);
+
+	return ret;
+}
+
+static unsigned int ab8500_regulator_get_optimum_mode(
+		struct regulator_dev *rdev, int input_uV,
+		int output_uV, int load_uA)
+{
+	unsigned int mode;
+
+	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+	if (info == NULL) {
+		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
+		return -EINVAL;
+	}
+
+	if (load_uA <= info->load_lp_uA)
+		mode = REGULATOR_MODE_IDLE;
+	else
+		mode = REGULATOR_MODE_NORMAL;
+
+	return mode;
+}
+
+static int ab8500_regulator_set_mode(struct regulator_dev *rdev,
+				     unsigned int mode)
+{
+	int ret = 0;
+
+	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+	if (info == NULL) {
+		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
+		return -EINVAL;
+	}
+
+	switch (mode) {
+	case REGULATOR_MODE_NORMAL:
+		info->update_val = info->update_val_normal;
+		break;
+	case REGULATOR_MODE_IDLE:
+		info->update_val = info->update_val_idle;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (info->is_enabled) {
+		ret = abx500_mask_and_set_register_interruptible(info->dev,
+			info->update_bank, info->update_reg,
+			info->update_mask, info->update_val);
+		if (ret < 0)
+			dev_err(rdev_get_dev(rdev),
+				"couldn't set regulator mode\n");
+
+		dev_vdbg(rdev_get_dev(rdev),
+			"%s-set_mode (bank, reg, mask, value): "
+			"0x%x, 0x%x, 0x%x, 0x%x\n",
+			info->desc.name, info->update_bank, info->update_reg,
+			info->update_mask, info->update_val);
+	}
+
+	return ret;
+}
+
+static unsigned int ab8500_regulator_get_mode(struct regulator_dev *rdev)
+{
+	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+	int ret;
+
+	if (info == NULL) {
+		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
+		return -EINVAL;
+	}
+
+	if (info->update_val == info->update_val_normal)
+		ret = REGULATOR_MODE_NORMAL;
+	else if (info->update_val == info->update_val_idle)
+		ret = REGULATOR_MODE_IDLE;
+	else
+		ret = -EINVAL;
+
+	return ret;
+}
+
+static int ab8500_regulator_is_enabled(struct regulator_dev *rdev)
+{
+	int ret;
+	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+	u8 regval;
+
+	if (info == NULL) {
+		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
+		return -EINVAL;
+	}
+
+	ret = abx500_get_register_interruptible(info->dev,
+		info->update_bank, info->update_reg, &regval);
+	if (ret < 0) {
+		dev_err(rdev_get_dev(rdev),
+			"couldn't read 0x%x register\n", info->update_reg);
+		return ret;
+	}
+
+	dev_vdbg(rdev_get_dev(rdev),
+		"%s-is_enabled (bank, reg, mask, value): 0x%x, 0x%x, 0x%x,"
+		" 0x%x\n",
+		info->desc.name, info->update_bank, info->update_reg,
+		info->update_mask, regval);
+
+	if (regval & info->update_mask)
+		info->is_enabled = true;
+	else
+		info->is_enabled = false;
+
+	return info->is_enabled;
+}
+
+static int ab8500_list_voltage(struct regulator_dev *rdev, unsigned selector)
+{
+	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+	if (info == NULL) {
+		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
+		return -EINVAL;
+	}
+
+	/* return the uV for the fixed regulators */
+	if (info->fixed_uV)
+		return info->fixed_uV;
+
+	if (selector >= info->voltages_len)
+		return -EINVAL;
+
+	return info->voltages[selector];
+}
+
+static int ab8500_regulator_get_voltage(struct regulator_dev *rdev)
+{
+	int ret, val;
+	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+	u8 regval;
+
+	if (info == NULL) {
+		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
+		return -EINVAL;
+	}
+
+	ret = abx500_get_register_interruptible(info->dev,
+			info->voltage_bank, info->voltage_reg, &regval);
+	if (ret < 0) {
+		dev_err(rdev_get_dev(rdev),
+			"couldn't read voltage reg for regulator\n");
+		return ret;
+	}
+
+	dev_vdbg(rdev_get_dev(rdev),
+		"%s-get_voltage (bank, reg, mask, value): 0x%x, 0x%x, 0x%x,"
+		" 0x%x\n",
+		info->desc.name, info->voltage_bank, info->voltage_reg,
+		info->voltage_mask, regval);
+
+	/* vintcore has a different layout */
+	val = regval & info->voltage_mask;
+	if (info->desc.id == AB8500_LDO_INTCORE)
+		ret = info->voltages[val >> 0x3];
+	else
+		ret = info->voltages[val];
+
+	return ret;
+}
+
+static int ab8500_get_best_voltage_index(struct regulator_dev *rdev,
+		int min_uV, int max_uV)
+{
+	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+	int i;
+
+	/* check the supported voltage */
+	for (i = 0; i < info->voltages_len; i++) {
+		if ((info->voltages[i] >= min_uV) &&
+		    (info->voltages[i] <= max_uV))
+			return i;
+	}
+
+	return -EINVAL;
+}
+
+static int ab8500_regulator_set_voltage(struct regulator_dev *rdev,
+		int min_uV, int max_uV)
+{
+	int ret;
+	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+	u8 regval;
+
+	if (info == NULL) {
+		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
+		return -EINVAL;
+	}
+
+	/* get the appropriate voltages within the range */
+	ret = ab8500_get_best_voltage_index(rdev, min_uV, max_uV);
+	if (ret < 0) {
+		dev_err(rdev_get_dev(rdev),
+				"couldn't get best voltage for regulator\n");
+		return ret;
+	}
+
+	/* vintcore register has a different layout */
+	if (info->desc.id == AB8500_LDO_INTCORE)
+		regval = ((u8)ret) << 3;
+	else
+		regval = (u8)ret;
+
+	/* set the registers for the request */
+	ret = abx500_mask_and_set_register_interruptible(info->dev,
+			info->voltage_bank, info->voltage_reg,
+			info->voltage_mask, regval);
+	if (ret < 0)
+		dev_err(rdev_get_dev(rdev),
+		"couldn't set voltage reg for regulator\n");
+
+	msleep(info->delay);
+
+	dev_vdbg(rdev_get_dev(rdev),
+		"%s-set_voltage (bank, reg, mask, value): 0x%x, 0x%x, 0x%x,"
+		" 0x%x\n",
+		info->desc.name, info->voltage_bank, info->voltage_reg,
+		info->voltage_mask, regval);
+
+	return ret;
+}
+
+static struct regulator_ops ab8500_regulator_volt_mode_ops = {
+	.enable			= ab8500_regulator_enable,
+	.disable		= ab8500_regulator_disable,
+	.is_enabled		= ab8500_regulator_is_enabled,
+	.get_optimum_mode	= ab8500_regulator_get_optimum_mode,
+	.set_mode		= ab8500_regulator_set_mode,
+	.get_mode		= ab8500_regulator_get_mode,
+	.get_voltage		= ab8500_regulator_get_voltage,
+	.set_voltage		= ab8500_regulator_set_voltage,
+	.list_voltage		= ab8500_list_voltage,
+};
+
+static int ab8500_fixed_get_voltage(struct regulator_dev *rdev)
+{
+	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+	if (info == NULL) {
+		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
+		return -EINVAL;
+	}
+
+	return info->fixed_uV;
+}
+
+static struct regulator_ops ab8500_regulator_mode_ops = {
+	.enable			= ab8500_regulator_enable,
+	.disable		= ab8500_regulator_disable,
+	.is_enabled		= ab8500_regulator_is_enabled,
+	.get_optimum_mode	= ab8500_regulator_get_optimum_mode,
+	.set_mode		= ab8500_regulator_set_mode,
+	.get_mode		= ab8500_regulator_get_mode,
+	.get_voltage		= ab8500_fixed_get_voltage,
+	.list_voltage		= ab8500_list_voltage,
+};
+
+static struct regulator_ops ab8500_regulator_ops = {
+	.enable			= ab8500_regulator_enable,
+	.disable		= ab8500_regulator_disable,
+	.is_enabled		= ab8500_regulator_is_enabled,
+	.get_voltage		= ab8500_fixed_get_voltage,
+	.list_voltage		= ab8500_list_voltage,
+};
+
+static int ab8500_sysclkreq_enable(struct regulator_dev *rdev)
+{
+	int ret;
+	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+	if (info == NULL) {
+		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
+		return -EINVAL;
+	}
+
+	ret = ab8500_gpio_config_select(info->dev, info->gpio_pin, false);
+	if (ret < 0) {
+		dev_err(rdev_get_dev(rdev),
+			"couldn't set sysclkreq pin selection\n");
+		return ret;
+	}
+
+	info->is_enabled = true;
+
+	dev_vdbg(rdev_get_dev(rdev),
+		"%s-enable (gpio_pin, gpio_select): %i, false\n",
+		info->desc.name, info->gpio_pin);
+
+	return ret;
+}
+
+static int ab8500_sysclkreq_disable(struct regulator_dev *rdev)
+{
+	int ret;
+	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+	if (info == NULL) {
+		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
+		return -EINVAL;
+	}
+
+	ret = ab8500_gpio_config_select(info->dev, info->gpio_pin, true);
+	if (ret < 0) {
+		dev_err(rdev_get_dev(rdev),
+			"couldn't set gpio pin selection\n");
+		return ret;
+	}
+
+	info->is_enabled = false;
+
+	dev_vdbg(rdev_get_dev(rdev),
+		"%s-disable (gpio_pin, gpio_select): %i, true\n",
+		info->desc.name, info->gpio_pin);
+
+	return ret;
+}
+
+static int ab8500_sysclkreq_is_enabled(struct regulator_dev *rdev)
+{
+	int ret;
+	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+	bool gpio_select;
+
+	if (info == NULL) {
+		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
+		return -EINVAL;
+	}
+
+	ret = ab8500_gpio_config_get_select(info->dev, info->gpio_pin,
+		&gpio_select);
+	if (ret < 0) {
+		dev_err(rdev_get_dev(rdev),
+			"couldn't read gpio pin selection\n");
+		return ret;
+	}
+
+	info->is_enabled = !gpio_select;
+
+	dev_vdbg(rdev_get_dev(rdev),
+		"%s-is_enabled (gpio_pin, is_enabled): %i, %i\n",
+		info->desc.name, info->gpio_pin, !gpio_select);
+
+	return info->is_enabled;
+}
+
+static struct regulator_ops ab8500_sysclkreq_ops = {
+	.enable		= ab8500_sysclkreq_enable,
+	.disable	= ab8500_sysclkreq_disable,
+	.is_enabled	= ab8500_sysclkreq_is_enabled,
+	.get_voltage	= ab8500_fixed_get_voltage,
+	.list_voltage	= ab8500_list_voltage,
+};
+
+static struct ab8500_regulator_info
+		ab8500_regulator_info[AB8500_NUM_REGULATORS] = {
+	/*
+	 * Regulators with variable voltage and normal/idle modes
+	 */
+	[AB8500_LDO_AUX1] = {
+		.desc = {
+			.name		= "LDO-AUX1",
+			.ops		= &ab8500_regulator_volt_mode_ops,
+			.type		= REGULATOR_VOLTAGE,
+			.id		= AB8500_LDO_AUX1,
+			.owner		= THIS_MODULE,
+			.n_voltages	= ARRAY_SIZE(ldo_vauxn_voltages),
+		},
+		.min_uV			= 1100000,
+		.max_uV			= 3300000,
+		.load_lp_uA		= 5000,
+		.update_bank		= 0x04,
+		.update_reg		= 0x09,
+		.update_mask		= 0x03,
+		.update_val		= 0x01,
+		.update_val_idle	= 0x03,
+		.update_val_normal	= 0x01,
+		.voltage_bank		= 0x04,
+		.voltage_reg		= 0x1f,
+		.voltage_mask		= 0x0f,
+		.voltages		= ldo_vauxn_voltages,
+		.voltages_len		= ARRAY_SIZE(ldo_vauxn_voltages),
+	},
+	[AB8500_LDO_AUX2] = {
+		.desc = {
+			.name		= "LDO-AUX2",
+			.ops		= &ab8500_regulator_volt_mode_ops,
+			.type		= REGULATOR_VOLTAGE,
+			.id		= AB8500_LDO_AUX2,
+			.owner		= THIS_MODULE,
+			.n_voltages	= ARRAY_SIZE(ldo_vauxn_voltages),
+		},
+		.min_uV			= 1100000,
+		.max_uV			= 3300000,
+		.load_lp_uA		= 5000,
+		.update_bank		= 0x04,
+		.update_reg		= 0x09,
+		.update_mask		= 0x0c,
+		.update_val		= 0x04,
+		.update_val_idle	= 0x0c,
+		.update_val_normal	= 0x04,
+		.voltage_bank		= 0x04,
+		.voltage_reg		= 0x20,
+		.voltage_mask		= 0x0f,
+		.voltages		= ldo_vauxn_voltages,
+		.voltages_len		= ARRAY_SIZE(ldo_vauxn_voltages),
+	},
+	[AB8500_LDO_AUX3] = {
+		.desc = {
+			.name		= "LDO-AUX3",
+			.ops		= &ab8500_regulator_volt_mode_ops,
+			.type		= REGULATOR_VOLTAGE,
+			.id		= AB8500_LDO_AUX3,
+			.owner		= THIS_MODULE,
+			.n_voltages	= ARRAY_SIZE(ldo_vaux3_voltages),
+		},
+		.min_uV			= 1100000,
+		.max_uV			= 3300000,
+		.load_lp_uA		= 5000,
+		.update_bank		= 0x04,
+		.update_reg		= 0x0a,
+		.update_mask		= 0x03,
+		.update_val		= 0x01,
+		.update_val_idle	= 0x03,
+		.update_val_normal	= 0x01,
+		.voltage_bank		= 0x04,
+		.voltage_reg		= 0x21,
+		.voltage_mask		= 0x07,
+		.voltages		= ldo_vaux3_voltages,
+		.voltages_len		= ARRAY_SIZE(ldo_vaux3_voltages),
+	},
+	[AB8500_LDO_INTCORE] = {
+		.desc = {
+			.name		= "LDO-INTCORE",
+			.ops		= &ab8500_regulator_volt_mode_ops,
+			.type		= REGULATOR_VOLTAGE,
+			.id		= AB8500_LDO_INTCORE,
+			.owner		= THIS_MODULE,
+			.n_voltages	= ARRAY_SIZE(ldo_vintcore_voltages),
+		},
+		.min_uV			= 1100000,
+		.max_uV			= 3300000,
+		.load_lp_uA		= 5000,
+		.update_bank		= 0x03,
+		.update_reg		= 0x80,
+		.update_mask		= 0x44,
+		.update_val		= 0x04,
+		.update_val_idle	= 0x44,
+		.update_val_normal	= 0x04,
+		.voltage_bank		= 0x03,
+		.voltage_reg		= 0x80,
+		.voltage_mask		= 0x38,
+		.voltages		= ldo_vintcore_voltages,
+		.voltages_len		= ARRAY_SIZE(ldo_vintcore_voltages),
+	},
+
+	/*
+	 * Regulators with fixed voltage and normal/idle modes
+	 */
+	[AB8500_LDO_TVOUT] = {
+		.desc = {
+			.name		= "LDO-TVOUT",
+			.ops		= &ab8500_regulator_mode_ops,
+			.type		= REGULATOR_VOLTAGE,
+			.id		= AB8500_LDO_TVOUT,
+			.owner		= THIS_MODULE,
+			.n_voltages	= 1,
+		},
+		.delay			= 10,
+		.fixed_uV		= 2000000,
+		.load_lp_uA		= 1000,
+		.update_bank		= 0x03,
+		.update_reg		= 0x80,
+		.update_mask		= 0x82,
+		.update_val		= 0x02,
+		.update_val_idle	= 0x82,
+		.update_val_normal	= 0x02,
+	},
+
+	/*
+	 * Regulators with fixed voltage and normal mode
+	 */
+	[AB8500_LDO_AUDIO] = {
+		.desc = {
+			.name		= "LDO-AUDIO",
+			.ops		= &ab8500_regulator_ops,
+			.type		= REGULATOR_VOLTAGE,
+			.id		= AB8500_LDO_AUDIO,
+			.owner		= THIS_MODULE,
+			.n_voltages	= 1,
+		},
+		.fixed_uV		= 2000000,
+		.update_bank		= 0x03,
+		.update_reg		= 0x83,
+		.update_mask		= 0x02,
+		.update_val		= 0x02,
+	},
+	[AB8500_LDO_ANAMIC1] = {
+		.desc = {
+			.name		= "LDO-ANAMIC1",
+			.ops		= &ab8500_regulator_ops,
+			.type		= REGULATOR_VOLTAGE,
+			.id		= AB8500_LDO_ANAMIC1,
+			.owner		= THIS_MODULE,
+			.n_voltages	= 1,
+		},
+		.fixed_uV		= 2050000,
+		.update_bank		= 0x03,
+		.update_reg		= 0x83,
+		.update_mask		= 0x08,
+		.update_val		= 0x08,
+	},
+	[AB8500_LDO_ANAMIC2] = {
+		.desc = {
+			.name		= "LDO-ANAMIC2",
+			.ops		= &ab8500_regulator_ops,
+			.type		= REGULATOR_VOLTAGE,
+			.id		= AB8500_LDO_ANAMIC2,
+			.owner		= THIS_MODULE,
+			.n_voltages	= 1,
+		},
+		.fixed_uV		= 2050000,
+		.update_bank		= 0x03,
+		.update_reg		= 0x83,
+		.update_mask		= 0x10,
+		.update_val		= 0x10,
+	},
+	[AB8500_LDO_DMIC] = {
+		.desc = {
+			.name		= "LDO-DMIC",
+			.ops		= &ab8500_regulator_ops,
+			.type		= REGULATOR_VOLTAGE,
+			.id		= AB8500_LDO_DMIC,
+			.owner		= THIS_MODULE,
+			.n_voltages	= 1,
+		},
+		.fixed_uV		= 1800000,
+		.update_bank		= 0x03,
+		.update_reg		= 0x83,
+		.update_mask		= 0x04,
+		.update_val		= 0x04,
+	},
+
+	/*
+	 * Regulators with fixed voltage and normal/idle modes
+	 */
+	[AB8500_LDO_ANA] = {
+		.desc = {
+			.name		= "LDO-ANA",
+			.ops		= &ab8500_regulator_mode_ops,
+			.type		= REGULATOR_VOLTAGE,
+			.id		= AB8500_LDO_ANA,
+			.owner		= THIS_MODULE,
+			.n_voltages	= 1,
+		},
+		.fixed_uV		= 1200000,
+		.load_lp_uA		= 1000,
+		.update_bank		= 0x04,
+		.update_reg		= 0x06,
+		.update_mask		= 0x0c,
+		.update_val		= 0x04,
+		.update_val_idle	= 0x0c,
+		.update_val_normal	= 0x04,
+	},
+
+	/*
+	 * SysClkReq regulators
+	 */
+	[AB8500_SYSCLKREQ_2] = {
+		.desc = {
+			.name		= "SYSCLKREQ-2",
+			.ops		= &ab8500_sysclkreq_ops,
+			.type		= REGULATOR_VOLTAGE,
+			.id		= AB8500_SYSCLKREQ_2,
+			.owner		= THIS_MODULE,
+			.n_voltages	= 1,
+		},
+		.fixed_uV		= 1, /* bogus value */
+		.gpio_pin		= AB8500_PIN_GPIO1,
+	},
+	[AB8500_SYSCLKREQ_4] = {
+		.desc = {
+			.name		= "SYSCLKREQ-4",
+			.ops		= &ab8500_sysclkreq_ops,
+			.type		= REGULATOR_VOLTAGE,
+			.id		= AB8500_SYSCLKREQ_4,
+			.owner		= THIS_MODULE,
+			.n_voltages	= 1,
+		},
+		.fixed_uV		= 1, /* bogus value */
+		.gpio_pin		= AB8500_PIN_GPIO3,
+	},
+};
+
+struct ab8500_reg_init {
+	u8 bank;
+	u8 addr;
+	u8 mask;
+};
+
+#define REG_INIT(_id, _bank, _addr, _mask)	\
+	[_id] = {				\
+		.bank = _bank,			\
+		.addr = _addr,			\
+		.mask = _mask,			\
+	}
+
+static struct ab8500_reg_init ab8500_reg_init[] = {
+	/*
+	 * 0x30, VanaRequestCtrl
+	 * 0x0c, VpllRequestCtrl
+	 * 0xc0, VextSupply1RequestCtrl
+	 */
+	REG_INIT(AB8500_REGUREQUESTCTRL2,	0x03, 0x04, 0xfc),
+	/*
+	 * 0x03, VextSupply2RequestCtrl
+	 * 0x0c, VextSupply3RequestCtrl
+	 * 0x30, Vaux1RequestCtrl
+	 * 0xc0, Vaux2RequestCtrl
+	 */
+	REG_INIT(AB8500_REGUREQUESTCTRL3,	0x03, 0x05, 0xff),
+	/*
+	 * 0x03, Vaux3RequestCtrl
+	 * 0x04, SwHPReq
+	 */
+	REG_INIT(AB8500_REGUREQUESTCTRL4,	0x03, 0x06, 0x07),
+	/*
+	 * 0x01, Vsmps1SysClkReq1HPValid
+	 * 0x02, Vsmps2SysClkReq1HPValid
+	 * 0x04, Vsmps3SysClkReq1HPValid
+	 * 0x08, VanaSysClkReq1HPValid
+	 * 0x10, VpllSysClkReq1HPValid
+	 * 0x20, Vaux1SysClkReq1HPValid
+	 * 0x40, Vaux2SysClkReq1HPValid
+	 * 0x80, Vaux3SysClkReq1HPValid
+	 */
+	REG_INIT(AB8500_REGUSYSCLKREQ1HPVALID1,	0x03, 0x07, 0xff),
+	/*
+	 * 0x10, VextSupply1SysClkReq1HPValid
+	 * 0x20, VextSupply2SysClkReq1HPValid
+	 * 0x40, VextSupply3SysClkReq1HPValid
+	 */
+	REG_INIT(AB8500_REGUSYSCLKREQ1HPVALID2,	0x03, 0x08, 0x70),
+	/*
+	 * 0x08, VanaHwHPReq1Valid
+	 * 0x20, Vaux1HwHPReq1Valid
+	 * 0x40, Vaux2HwHPReq1Valid
+	 * 0x80, Vaux3HwHPReq1Valid
+	 */
+	REG_INIT(AB8500_REGUHWHPREQ1VALID1,	0x03, 0x09, 0xe8),
+	/*
+	 * 0x01, VextSupply1HwHPReq1Valid
+	 * 0x02, VextSupply2HwHPReq1Valid
+	 * 0x04, VextSupply3HwHPReq1Valid
+	 */
+	REG_INIT(AB8500_REGUHWHPREQ1VALID2,	0x03, 0x0a, 0x07),
+	/*
+	 * 0x08, VanaHwHPReq2Valid
+	 * 0x20, Vaux1HwHPReq2Valid
+	 * 0x40, Vaux2HwHPReq2Valid
+	 * 0x80, Vaux3HwHPReq2Valid
+	 */
+	REG_INIT(AB8500_REGUHWHPREQ2VALID1,	0x03, 0x0b, 0xe8),
+	/*
+	 * 0x01, VextSupply1HwHPReq2Valid
+	 * 0x02, VextSupply2HwHPReq2Valid
+	 * 0x04, VextSupply3HwHPReq2Valid
+	 */
+	REG_INIT(AB8500_REGUHWHPREQ2VALID2,	0x03, 0x0c, 0x07),
+	/*
+	 * 0x20, VanaSwHPReqValid
+	 * 0x80, Vaux1SwHPReqValid
+	 */
+	REG_INIT(AB8500_REGUSWHPREQVALID1,	0x03, 0x0d, 0xa0),
+	/*
+	 * 0x01, Vaux2SwHPReqValid
+	 * 0x02, Vaux3SwHPReqValid
+	 * 0x04, VextSupply1SwHPReqValid
+	 * 0x08, VextSupply2SwHPReqValid
+	 * 0x10, VextSupply3SwHPReqValid
+	 */
+	REG_INIT(AB8500_REGUSWHPREQVALID2,	0x03, 0x0e, 0x1f),
+	/*
+	 * 0x02, SysClkReq2Valid1
+	 * ...
+	 * 0x80, SysClkReq8Valid1
+	 */
+	REG_INIT(AB8500_REGUSYSCLKREQVALID1,	0x03, 0x0f, 0xfe),
+	/*
+	 * 0x02, SysClkReq2Valid2
+	 * ...
+	 * 0x80, SysClkReq8Valid2
+	 */
+	REG_INIT(AB8500_REGUSYSCLKREQVALID2,	0x03, 0x10, 0xfe),
+	/*
+	 * 0x02, VTVoutEna
+	 * 0x04, Vintcore12Ena
+	 * 0x38, Vintcore12Sel
+	 * 0x40, Vintcore12LP
+	 * 0x80, VTVoutLP
+	 */
+	REG_INIT(AB8500_REGUMISC1,		0x03, 0x80, 0xfe),
+	/*
+	 * 0x02, VaudioEna
+	 * 0x04, VdmicEna
+	 * 0x08, Vamic1Ena
+	 * 0x10, Vamic2Ena
+	 */
+	REG_INIT(AB8500_VAUDIOSUPPLY,		0x03, 0x83, 0x1e),
+	/*
+	 * 0x01, Vamic1_dzout
+	 * 0x02, Vamic2_dzout
+	 */
+	REG_INIT(AB8500_REGUCTRL1VAMIC,		0x03, 0x84, 0x03),
+	/*
+	 * 0x0c, VBBNRegu
+	 * 0x03, VBBPRegu
+	 * NOTE! PRCMU register
+	 */
+	REG_INIT(AB8500_ARMREGU2,		0x04, 0x01, 0x0f),
+	/*
+	 * 0x0c, VBBPSel1
+	 * 0x03, VBBNSel1
+	 * NOTE! PRCMU register
+	 */
+	REG_INIT(AB8500_VBBSEL1,		0x04, 0x11, 0x0f),
+	/*
+	 * 0x0c, VBBNSel2
+	 * 0x03, VBBPSel2
+	 * NOTE! PRCMU register
+	 */
+	REG_INIT(AB8500_VBBSEL2,		0x04, 0x12, 0x0f),
+	/*
+	 * 0x03, Vsmps1Regu
+	 * 0x0c, Vsmps1SelCtrl
+	 */
+	REG_INIT(AB8500_VSMPS1REGU,		0x04, 0x03, 0x0f),
+	/*
+	 * 0x03, Vsmps2Regu
+	 * 0x0c, Vsmps2SelCtrl
+	 */
+	REG_INIT(AB8500_VSMPS2REGU,		0x04, 0x04, 0x0f),
+	/*
+	 * 0x03, Vsmps3Regu
+	 * 0x0c, Vsmps3SelCtrl
+	 * NOTE! PRCMU register
+	 */
+	REG_INIT(AB8500_VSMPS3REGU,		0x04, 0x05, 0x0f),
+	/*
+	 * 0x0c, VanaRegu
+	 * 0x03, VpllRegu
+	 */
+	REG_INIT(AB8500_VPLLVANAREGU,		0x04, 0x06, 0x0f),
+	/*
+	 * 0x01, VrefDDREna
+	 * 0x02, VrefDDRSleepMode
+	 */
+	REG_INIT(AB8500_VREFDDR,		0x04, 0x07, 0x03),
+	/*
+	 * 0x03, VextSupply1Regu
+	 * 0x0c, VextSupply2Regu
+	 * 0x30, VextSupply3Regu
+	 * 0x40, ExtSupply2Bypass
+	 * 0x80, ExtSupply3Bypass
+	 */
+	REG_INIT(AB8500_EXTSUPPLYREGU,		0x04, 0x08, 0xff),
+	/*
+	 * 0x03, Vaux1Regu
+	 * 0x0c, Vaux2Regu
+	 */
+	REG_INIT(AB8500_VAUX12REGU,		0x04, 0x09, 0x0f),
+	/*
+	 * 0x0c, Vrf1Regu
+	 * 0x03, Vaux3Regu
+	 */
+	REG_INIT(AB8500_VRF1VAUX3REGU,		0x04, 0x0a, 0x0f),
+	/*
+	 * 0x3f, Vsmps1Sel1
+	 */
+	REG_INIT(AB8500_VSMPS1SEL1,		0x04, 0x13, 0x3f),
+	/*
+	 * 0x7f, Vsmps3Sel1
+	 */
+	REG_INIT(AB8500_VSMPS3SEL1,             0x04, 0x1b, 0x7f),
+	/*
+	 * 0x7f, Vsmps3Sel2
+	 */
+	REG_INIT(AB8500_VSMPS3SEL2,             0x04, 0x1c, 0x7f),
+	/*
+	 * 0x0f, Vaux1Sel
+	 */
+	REG_INIT(AB8500_VAUX1SEL,		0x04, 0x1f, 0x0f),
+	/*
+	 * 0x0f, Vaux2Sel
+	 */
+	REG_INIT(AB8500_VAUX2SEL,		0x04, 0x20, 0x0f),
+	/*
+	 * 0x07, Vaux3Sel
+	 */
+	REG_INIT(AB8500_VRF1VAUX3SEL,		0x04, 0x21, 0x07),
+	/*
+	 * 0x01, VextSupply12LP
+	 */
+	REG_INIT(AB8500_REGUCTRL2SPARE,		0x04, 0x22, 0x01),
+	/*
+	 * 0x04, Vaux1Disch
+	 * 0x08, Vaux2Disch
+	 * 0x10, Vaux3Disch
+	 * 0x20, Vintcore12Disch
+	 * 0x40, VTVoutDisch
+	 * 0x80, VaudioDisch
+	 */
+	REG_INIT(AB8500_REGUCTRLDISCH,		0x04, 0x43, 0xfc),
+	/*
+	 * 0x02, VanaDisch
+	 * 0x04, VdmicPullDownEna
+	 * 0x10, VdmicDisch
+	 */
+	REG_INIT(AB8500_REGUCTRLDISCH2,		0x04, 0x44, 0x16),
+};
+
+static __devinit int ab8500_regulator_probe(struct platform_device *pdev)
+{
+	struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
+	struct ab8500_platform_data *pdata;
+	int i, err;
+
+	if (!ab8500) {
+		dev_err(&pdev->dev, "null mfd parent\n");
+		return -EINVAL;
+	}
+	pdata = dev_get_platdata(ab8500->dev);
+	if (!pdata) {
+		dev_err(&pdev->dev, "null pdata\n");
+		return -EINVAL;
+	}
+
+	/* make sure the platform data has the correct size */
+	if (pdata->num_regulator != ARRAY_SIZE(ab8500_regulator_info)) {
+		dev_err(&pdev->dev, "Configuration error: size mismatch.\n");
+		return -EINVAL;
+	}
+
+	/* initialize registers */
+	for (i = 0; i < pdata->num_regulator_reg_init; i++) {
+		int id;
+		u8 value;
+
+		id = pdata->regulator_reg_init[i].id;
+		value = pdata->regulator_reg_init[i].value;
+
+		/* check for configuration errors */
+		if (id >= AB8500_NUM_REGULATOR_REGISTERS) {
+			dev_err(&pdev->dev,
+				"Configuration error: id outside range.\n");
+			return -EINVAL;
+		}
+		if (value & ~ab8500_reg_init[id].mask) {
+			dev_err(&pdev->dev,
+				"Configuration error: value outside mask.\n");
+			return -EINVAL;
+		}
+
+		/* initialize register */
+		err = abx500_mask_and_set_register_interruptible(&pdev->dev,
+			ab8500_reg_init[id].bank,
+			ab8500_reg_init[id].addr,
+			ab8500_reg_init[id].mask,
+			value);
+		if (err < 0) {
+			dev_err(&pdev->dev,
+				"Failed to initialize 0x%02x, 0x%02x.\n",
+				ab8500_reg_init[id].bank,
+				ab8500_reg_init[id].addr);
+			return err;
+		}
+		dev_vdbg(&pdev->dev,
+			"  init: 0x%02x, 0x%02x, 0x%02x, 0x%02x\n",
+			ab8500_reg_init[id].bank,
+			ab8500_reg_init[id].addr,
+			ab8500_reg_init[id].mask,
+			value);
+	}
+
+	/*
+	 * Remove below when ab8500v2.0 is no longer important.
+	 * Below only affects power consumption and is depending on the
+	 * HREF OTP configuration.
+	 * It changes the default setting for VextSupply3Regu to Low Power.
+	 * Active high or low is depending on OTP which is changed from ab8500v3.0.
+	 */
+	if (abx500_get_chip_id(&pdev->dev) < 0x30) {
+		err = abx500_mask_and_set_register_interruptible(&pdev->dev,
+			AB8500_REGU_CTRL2, 0x08, 0x30, 0x30);
+		if (err < 0) {
+			dev_err(&pdev->dev,
+				"Failed to override 0x%02x, 0x%02x.\n",
+				AB8500_REGU_CTRL2, 0x08);
+			return err;
+		}
+	}
+
+	/* register all regulators */
+	for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) {
+		struct ab8500_regulator_info *info = NULL;
+
+		/* assign per-regulator data */
+		info = &ab8500_regulator_info[i];
+		info->dev = &pdev->dev;
+
+		/* fix for hardware before ab8500v2.0 */
+		if (abx500_get_chip_id(info->dev) < 0x20) {
+			if (info->desc.id == AB8500_LDO_AUX3) {
+				info->desc.n_voltages =
+					ARRAY_SIZE(ldo_vauxn_voltages);
+				info->voltages = ldo_vauxn_voltages;
+				info->voltages_len =
+					ARRAY_SIZE(ldo_vauxn_voltages);
+				info->voltage_mask = 0xf;
+			}
+		}
+
+		/* register regulator with framework */
+		info->regulator = regulator_register(&info->desc, &pdev->dev,
+				&pdata->regulator[i], info);
+		if (IS_ERR(info->regulator)) {
+			err = PTR_ERR(info->regulator);
+			dev_err(&pdev->dev, "failed to register regulator %s\n",
+					info->desc.name);
+			/* when we fail, un-register all earlier regulators */
+			while (--i >= 0) {
+				info = &ab8500_regulator_info[i];
+				regulator_unregister(info->regulator);
+			}
+			return err;
+		}
+
+		dev_vdbg(rdev_get_dev(info->regulator),
+			"%s-probed\n", info->desc.name);
+	}
+
+	return 0;
+}
+
+static __devexit int ab8500_regulator_remove(struct platform_device *pdev)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) {
+		struct ab8500_regulator_info *info = NULL;
+		info = &ab8500_regulator_info[i];
+
+		dev_vdbg(rdev_get_dev(info->regulator),
+			"%s-remove\n", info->desc.name);
+
+		regulator_unregister(info->regulator);
+	}
+
+	return 0;
+}
+
+static struct platform_driver ab8500_regulator_driver = {
+	.probe = ab8500_regulator_probe,
+	.remove = __devexit_p(ab8500_regulator_remove),
+	.driver         = {
+		.name   = "ab8500-regulator",
+		.owner  = THIS_MODULE,
+	},
+};
+
+static int __init ab8500_regulator_init(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&ab8500_regulator_driver);
+	if (ret != 0)
+		pr_err("Failed to register ab8500 regulator: %d\n", ret);
+
+	return ret;
+}
+subsys_initcall(ab8500_regulator_init);
+
+static void __exit ab8500_regulator_exit(void)
+{
+	platform_driver_unregister(&ab8500_regulator_driver);
+}
+module_exit(ab8500_regulator_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Sundar Iyer <sundar.iyer@stericsson.com>");
+MODULE_DESCRIPTION("Regulator Driver for ST-Ericsson AB8500 Mixed-Sig PMIC");
+MODULE_ALIAS("platform:ab8500-regulator");